| Anton Vorontsov | 236dd4d | 2009-01-10 05:03:21 +0300 | [diff] [blame] | 1 | /* | 
 | 2 |  * Freescale QUICC Engine USB Host Controller Driver | 
 | 3 |  * | 
 | 4 |  * Copyright (c) Freescale Semicondutor, Inc. 2006. | 
 | 5 |  *               Shlomi Gridish <gridish@freescale.com> | 
 | 6 |  *               Jerry Huang <Chang-Ming.Huang@freescale.com> | 
 | 7 |  * Copyright (c) Logic Product Development, Inc. 2007 | 
 | 8 |  *               Peter Barada <peterb@logicpd.com> | 
 | 9 |  * Copyright (c) MontaVista Software, Inc. 2008. | 
 | 10 |  *               Anton Vorontsov <avorontsov@ru.mvista.com> | 
 | 11 |  * | 
 | 12 |  * This program is free software; you can redistribute  it and/or modify it | 
 | 13 |  * under  the terms of  the GNU General  Public License as published by the | 
 | 14 |  * Free Software Foundation;  either version 2 of the  License, or (at your | 
 | 15 |  * option) any later version. | 
 | 16 |  */ | 
 | 17 |  | 
 | 18 | #include <linux/kernel.h> | 
 | 19 | #include <linux/types.h> | 
 | 20 | #include <linux/spinlock.h> | 
 | 21 | #include <linux/delay.h> | 
 | 22 | #include <linux/errno.h> | 
 | 23 | #include <linux/io.h> | 
 | 24 | #include <linux/usb.h> | 
| Eric Lescouet | 27729aa | 2010-04-24 23:21:52 +0200 | [diff] [blame] | 25 | #include <linux/usb/hcd.h> | 
| Anton Vorontsov | 236dd4d | 2009-01-10 05:03:21 +0300 | [diff] [blame] | 26 | #include <linux/gpio.h> | 
 | 27 | #include <asm/qe.h> | 
| Anton Vorontsov | 236dd4d | 2009-01-10 05:03:21 +0300 | [diff] [blame] | 28 | #include "fhci.h" | 
 | 29 |  | 
 | 30 | /* virtual root hub specific descriptor */ | 
 | 31 | static u8 root_hub_des[] = { | 
 | 32 | 	0x09, /* blength */ | 
 | 33 | 	0x29, /* bDescriptorType;hub-descriptor */ | 
 | 34 | 	0x01, /* bNbrPorts */ | 
 | 35 | 	0x00, /* wHubCharacteristics */ | 
 | 36 | 	0x00, | 
 | 37 | 	0x01, /* bPwrOn2pwrGood;2ms */ | 
 | 38 | 	0x00, /* bHubContrCurrent;0mA */ | 
 | 39 | 	0x00, /* DeviceRemoveable */ | 
 | 40 | 	0xff, /* PortPwrCtrlMask */ | 
 | 41 | }; | 
 | 42 |  | 
 | 43 | static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on) | 
 | 44 | { | 
 | 45 | 	int gpio = fhci->gpios[gpio_nr]; | 
 | 46 | 	bool alow = fhci->alow_gpios[gpio_nr]; | 
 | 47 |  | 
 | 48 | 	if (!gpio_is_valid(gpio)) | 
 | 49 | 		return; | 
 | 50 |  | 
 | 51 | 	gpio_set_value(gpio, on ^ alow); | 
 | 52 | 	mdelay(5); | 
 | 53 | } | 
 | 54 |  | 
 | 55 | void fhci_config_transceiver(struct fhci_hcd *fhci, | 
 | 56 | 			     enum fhci_port_status status) | 
 | 57 | { | 
 | 58 | 	fhci_dbg(fhci, "-> %s: %d\n", __func__, status); | 
 | 59 |  | 
 | 60 | 	switch (status) { | 
 | 61 | 	case FHCI_PORT_POWER_OFF: | 
 | 62 | 		fhci_gpio_set_value(fhci, GPIO_POWER, false); | 
 | 63 | 		break; | 
 | 64 | 	case FHCI_PORT_DISABLED: | 
 | 65 | 	case FHCI_PORT_WAITING: | 
 | 66 | 		fhci_gpio_set_value(fhci, GPIO_POWER, true); | 
 | 67 | 		break; | 
 | 68 | 	case FHCI_PORT_LOW: | 
 | 69 | 		fhci_gpio_set_value(fhci, GPIO_SPEED, false); | 
 | 70 | 		break; | 
 | 71 | 	case FHCI_PORT_FULL: | 
 | 72 | 		fhci_gpio_set_value(fhci, GPIO_SPEED, true); | 
 | 73 | 		break; | 
 | 74 | 	default: | 
 | 75 | 		WARN_ON(1); | 
 | 76 | 		break; | 
 | 77 | 	} | 
 | 78 |  | 
 | 79 | 	fhci_dbg(fhci, "<- %s: %d\n", __func__, status); | 
 | 80 | } | 
 | 81 |  | 
 | 82 | /* disable the USB port by clearing the EN bit in the USBMOD register */ | 
 | 83 | void fhci_port_disable(struct fhci_hcd *fhci) | 
 | 84 | { | 
 | 85 | 	struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld; | 
 | 86 | 	enum fhci_port_status port_status; | 
 | 87 |  | 
 | 88 | 	fhci_dbg(fhci, "-> %s\n", __func__); | 
 | 89 |  | 
 | 90 | 	fhci_stop_sof_timer(fhci); | 
 | 91 |  | 
 | 92 | 	fhci_flush_all_transmissions(usb); | 
 | 93 |  | 
 | 94 | 	fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld); | 
 | 95 | 	port_status = usb->port_status; | 
 | 96 | 	usb->port_status = FHCI_PORT_DISABLED; | 
 | 97 |  | 
 | 98 | 	/* Enable IDLE since we want to know if something comes along */ | 
 | 99 | 	usb->saved_msk |= USB_E_IDLE_MASK; | 
 | 100 | 	out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); | 
 | 101 |  | 
 | 102 | 	/* check if during the disconnection process attached new device */ | 
 | 103 | 	if (port_status == FHCI_PORT_WAITING) | 
 | 104 | 		fhci_device_connected_interrupt(fhci); | 
 | 105 | 	usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE; | 
 | 106 | 	usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; | 
 | 107 | 	fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld); | 
 | 108 |  | 
 | 109 | 	fhci_dbg(fhci, "<- %s\n", __func__); | 
 | 110 | } | 
 | 111 |  | 
 | 112 | /* enable the USB port by setting the EN bit in the USBMOD register */ | 
 | 113 | void fhci_port_enable(void *lld) | 
 | 114 | { | 
 | 115 | 	struct fhci_usb *usb = (struct fhci_usb *)lld; | 
 | 116 | 	struct fhci_hcd *fhci = usb->fhci; | 
 | 117 |  | 
 | 118 | 	fhci_dbg(fhci, "-> %s\n", __func__); | 
 | 119 |  | 
 | 120 | 	fhci_config_transceiver(fhci, usb->port_status); | 
 | 121 |  | 
 | 122 | 	if ((usb->port_status != FHCI_PORT_FULL) && | 
 | 123 | 			(usb->port_status != FHCI_PORT_LOW)) | 
 | 124 | 		fhci_start_sof_timer(fhci); | 
 | 125 |  | 
 | 126 | 	usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE; | 
 | 127 | 	usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; | 
 | 128 |  | 
 | 129 | 	fhci_dbg(fhci, "<- %s\n", __func__); | 
 | 130 | } | 
 | 131 |  | 
 | 132 | void fhci_io_port_generate_reset(struct fhci_hcd *fhci) | 
 | 133 | { | 
 | 134 | 	fhci_dbg(fhci, "-> %s\n", __func__); | 
 | 135 |  | 
 | 136 | 	gpio_direction_output(fhci->gpios[GPIO_USBOE], 0); | 
 | 137 | 	gpio_direction_output(fhci->gpios[GPIO_USBTP], 0); | 
 | 138 | 	gpio_direction_output(fhci->gpios[GPIO_USBTN], 0); | 
 | 139 |  | 
 | 140 | 	mdelay(5); | 
 | 141 |  | 
 | 142 | 	qe_pin_set_dedicated(fhci->pins[PIN_USBOE]); | 
 | 143 | 	qe_pin_set_dedicated(fhci->pins[PIN_USBTP]); | 
 | 144 | 	qe_pin_set_dedicated(fhci->pins[PIN_USBTN]); | 
 | 145 |  | 
 | 146 | 	fhci_dbg(fhci, "<- %s\n", __func__); | 
 | 147 | } | 
 | 148 |  | 
 | 149 | /* generate the RESET condition on the bus */ | 
 | 150 | void fhci_port_reset(void *lld) | 
 | 151 | { | 
 | 152 | 	struct fhci_usb *usb = (struct fhci_usb *)lld; | 
 | 153 | 	struct fhci_hcd *fhci = usb->fhci; | 
 | 154 | 	u8 mode; | 
 | 155 | 	u16 mask; | 
 | 156 |  | 
 | 157 | 	fhci_dbg(fhci, "-> %s\n", __func__); | 
 | 158 |  | 
 | 159 | 	fhci_stop_sof_timer(fhci); | 
 | 160 | 	/* disable the USB controller */ | 
 | 161 | 	mode = in_8(&fhci->regs->usb_mod); | 
 | 162 | 	out_8(&fhci->regs->usb_mod, mode & (~USB_MODE_EN)); | 
 | 163 |  | 
 | 164 | 	/* disable idle interrupts */ | 
 | 165 | 	mask = in_be16(&fhci->regs->usb_mask); | 
 | 166 | 	out_be16(&fhci->regs->usb_mask, mask & (~USB_E_IDLE_MASK)); | 
 | 167 |  | 
 | 168 | 	fhci_io_port_generate_reset(fhci); | 
 | 169 |  | 
 | 170 | 	/* enable interrupt on this endpoint */ | 
 | 171 | 	out_be16(&fhci->regs->usb_mask, mask); | 
 | 172 |  | 
 | 173 | 	/* enable the USB controller */ | 
 | 174 | 	mode = in_8(&fhci->regs->usb_mod); | 
 | 175 | 	out_8(&fhci->regs->usb_mod, mode | USB_MODE_EN); | 
 | 176 | 	fhci_start_sof_timer(fhci); | 
 | 177 |  | 
 | 178 | 	fhci_dbg(fhci, "<- %s\n", __func__); | 
 | 179 | } | 
 | 180 |  | 
 | 181 | int fhci_hub_status_data(struct usb_hcd *hcd, char *buf) | 
 | 182 | { | 
 | 183 | 	struct fhci_hcd *fhci = hcd_to_fhci(hcd); | 
 | 184 | 	int ret = 0; | 
 | 185 | 	unsigned long flags; | 
 | 186 |  | 
 | 187 | 	fhci_dbg(fhci, "-> %s\n", __func__); | 
 | 188 |  | 
 | 189 | 	spin_lock_irqsave(&fhci->lock, flags); | 
 | 190 |  | 
 | 191 | 	if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION | | 
 | 192 | 			USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND | | 
 | 193 | 			USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) { | 
 | 194 | 		*buf = 1 << 1; | 
 | 195 | 		ret = 1; | 
 | 196 | 		fhci_dbg(fhci, "-- %s\n", __func__); | 
 | 197 | 	} | 
 | 198 |  | 
 | 199 | 	spin_unlock_irqrestore(&fhci->lock, flags); | 
 | 200 |  | 
 | 201 | 	fhci_dbg(fhci, "<- %s\n", __func__); | 
 | 202 |  | 
 | 203 | 	return ret; | 
 | 204 | } | 
 | 205 |  | 
 | 206 | int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, | 
 | 207 | 			    u16 wIndex, char *buf, u16 wLength) | 
 | 208 | { | 
 | 209 | 	struct fhci_hcd *fhci = hcd_to_fhci(hcd); | 
 | 210 | 	int retval = 0; | 
 | 211 | 	int len = 0; | 
 | 212 | 	struct usb_hub_status *hub_status; | 
 | 213 | 	struct usb_port_status *port_status; | 
 | 214 | 	unsigned long flags; | 
 | 215 |  | 
 | 216 | 	spin_lock_irqsave(&fhci->lock, flags); | 
 | 217 |  | 
 | 218 | 	fhci_dbg(fhci, "-> %s\n", __func__); | 
 | 219 |  | 
 | 220 | 	switch (typeReq) { | 
 | 221 | 	case ClearHubFeature: | 
 | 222 | 		switch (wValue) { | 
 | 223 | 		case C_HUB_LOCAL_POWER: | 
 | 224 | 		case C_HUB_OVER_CURRENT: | 
 | 225 | 			break; | 
 | 226 | 		default: | 
 | 227 | 			goto error; | 
 | 228 | 		} | 
 | 229 | 		break; | 
 | 230 | 	case ClearPortFeature: | 
 | 231 | 		fhci->vroot_hub->feature &= (1 << wValue); | 
 | 232 |  | 
 | 233 | 		switch (wValue) { | 
 | 234 | 		case USB_PORT_FEAT_ENABLE: | 
 | 235 | 			fhci->vroot_hub->port.wPortStatus &= | 
 | 236 | 			    ~USB_PORT_STAT_ENABLE; | 
 | 237 | 			fhci_port_disable(fhci); | 
 | 238 | 			break; | 
 | 239 | 		case USB_PORT_FEAT_C_ENABLE: | 
 | 240 | 			fhci->vroot_hub->port.wPortChange &= | 
 | 241 | 			    ~USB_PORT_STAT_C_ENABLE; | 
 | 242 | 			break; | 
 | 243 | 		case USB_PORT_FEAT_SUSPEND: | 
 | 244 | 			fhci->vroot_hub->port.wPortStatus &= | 
 | 245 | 			    ~USB_PORT_STAT_SUSPEND; | 
 | 246 | 			fhci_stop_sof_timer(fhci); | 
 | 247 | 			break; | 
 | 248 | 		case USB_PORT_FEAT_C_SUSPEND: | 
 | 249 | 			fhci->vroot_hub->port.wPortChange &= | 
 | 250 | 			    ~USB_PORT_STAT_C_SUSPEND; | 
 | 251 | 			break; | 
 | 252 | 		case USB_PORT_FEAT_POWER: | 
 | 253 | 			fhci->vroot_hub->port.wPortStatus &= | 
 | 254 | 			    ~USB_PORT_STAT_POWER; | 
 | 255 | 			fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); | 
 | 256 | 			break; | 
 | 257 | 		case USB_PORT_FEAT_C_CONNECTION: | 
 | 258 | 			fhci->vroot_hub->port.wPortChange &= | 
 | 259 | 			    ~USB_PORT_STAT_C_CONNECTION; | 
 | 260 | 			break; | 
 | 261 | 		case USB_PORT_FEAT_C_OVER_CURRENT: | 
 | 262 | 			fhci->vroot_hub->port.wPortChange &= | 
 | 263 | 			    ~USB_PORT_STAT_C_OVERCURRENT; | 
 | 264 | 			break; | 
 | 265 | 		case USB_PORT_FEAT_C_RESET: | 
 | 266 | 			fhci->vroot_hub->port.wPortChange &= | 
 | 267 | 			    ~USB_PORT_STAT_C_RESET; | 
 | 268 | 			break; | 
 | 269 | 		default: | 
 | 270 | 			goto error; | 
 | 271 | 		} | 
 | 272 | 		break; | 
 | 273 | 	case GetHubDescriptor: | 
 | 274 | 		memcpy(buf, root_hub_des, sizeof(root_hub_des)); | 
 | 275 | 		buf[3] = 0x11; /* per-port power, no ovrcrnt */ | 
 | 276 | 		len = (buf[0] < wLength) ? buf[0] : wLength; | 
 | 277 | 		break; | 
 | 278 | 	case GetHubStatus: | 
 | 279 | 		hub_status = (struct usb_hub_status *)buf; | 
 | 280 | 		hub_status->wHubStatus = | 
 | 281 | 		    cpu_to_le16(fhci->vroot_hub->hub.wHubStatus); | 
 | 282 | 		hub_status->wHubChange = | 
 | 283 | 		    cpu_to_le16(fhci->vroot_hub->hub.wHubChange); | 
 | 284 | 		len = 4; | 
 | 285 | 		break; | 
 | 286 | 	case GetPortStatus: | 
 | 287 | 		port_status = (struct usb_port_status *)buf; | 
 | 288 | 		port_status->wPortStatus = | 
 | 289 | 		    cpu_to_le16(fhci->vroot_hub->port.wPortStatus); | 
 | 290 | 		port_status->wPortChange = | 
 | 291 | 		    cpu_to_le16(fhci->vroot_hub->port.wPortChange); | 
 | 292 | 		len = 4; | 
 | 293 | 		break; | 
 | 294 | 	case SetHubFeature: | 
 | 295 | 		switch (wValue) { | 
 | 296 | 		case C_HUB_OVER_CURRENT: | 
 | 297 | 		case C_HUB_LOCAL_POWER: | 
 | 298 | 			break; | 
 | 299 | 		default: | 
 | 300 | 			goto error; | 
 | 301 | 		} | 
 | 302 | 		break; | 
 | 303 | 	case SetPortFeature: | 
 | 304 | 		fhci->vroot_hub->feature |= (1 << wValue); | 
 | 305 |  | 
 | 306 | 		switch (wValue) { | 
 | 307 | 		case USB_PORT_FEAT_ENABLE: | 
 | 308 | 			fhci->vroot_hub->port.wPortStatus |= | 
 | 309 | 			    USB_PORT_STAT_ENABLE; | 
 | 310 | 			fhci_port_enable(fhci->usb_lld); | 
 | 311 | 			break; | 
 | 312 | 		case USB_PORT_FEAT_SUSPEND: | 
 | 313 | 			fhci->vroot_hub->port.wPortStatus |= | 
 | 314 | 			    USB_PORT_STAT_SUSPEND; | 
 | 315 | 			fhci_stop_sof_timer(fhci); | 
 | 316 | 			break; | 
 | 317 | 		case USB_PORT_FEAT_RESET: | 
 | 318 | 			fhci->vroot_hub->port.wPortStatus |= | 
 | 319 | 			    USB_PORT_STAT_RESET; | 
 | 320 | 			fhci_port_reset(fhci->usb_lld); | 
 | 321 | 			fhci->vroot_hub->port.wPortStatus |= | 
 | 322 | 			    USB_PORT_STAT_ENABLE; | 
 | 323 | 			fhci->vroot_hub->port.wPortStatus &= | 
 | 324 | 			    ~USB_PORT_STAT_RESET; | 
 | 325 | 			break; | 
 | 326 | 		case USB_PORT_FEAT_POWER: | 
 | 327 | 			fhci->vroot_hub->port.wPortStatus |= | 
 | 328 | 			    USB_PORT_STAT_POWER; | 
 | 329 | 			fhci_config_transceiver(fhci, FHCI_PORT_WAITING); | 
 | 330 | 			break; | 
 | 331 | 		default: | 
 | 332 | 			goto error; | 
 | 333 | 		} | 
 | 334 | 		break; | 
 | 335 | 	default: | 
 | 336 | error: | 
 | 337 | 		retval = -EPIPE; | 
 | 338 | 	} | 
 | 339 |  | 
 | 340 | 	fhci_dbg(fhci, "<- %s\n", __func__); | 
 | 341 |  | 
 | 342 | 	spin_unlock_irqrestore(&fhci->lock, flags); | 
 | 343 |  | 
 | 344 | 	return retval; | 
 | 345 | } |