| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | if ARCH_SA1100 |
| 2 | |
| 3 | menu "SA11x0 Implementations" |
| 4 | |
| 5 | config SA1100_ASSABET |
| 6 | bool "Assabet" |
| 7 | help |
| 8 | Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 |
| 9 | Microprocessor Development Board (also known as the Assabet). |
| 10 | |
| 11 | config ASSABET_NEPONSET |
| 12 | bool "Include support for Neponset" |
| 13 | depends on SA1100_ASSABET |
| 14 | select SA1111 |
| 15 | help |
| 16 | Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 |
| 17 | Microprocessor Development Board (Assabet) with the SA-1111 |
| 18 | Development Board (Nepon). |
| 19 | |
| 20 | config SA1100_CERF |
| 21 | bool "CerfBoard" |
| 22 | help |
| 23 | The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued). |
| 24 | More information is available at: |
| 25 | <http://www.intrinsyc.com/products/cerfboard/>. |
| 26 | |
| 27 | Say Y if configuring for an Intrinsyc CerfBoard. |
| 28 | Say N otherwise. |
| 29 | |
| 30 | choice |
| 31 | prompt "Cerf Flash available" |
| 32 | depends on SA1100_CERF |
| 33 | default SA1100_CERF_FLASH_8MB |
| 34 | |
| 35 | config SA1100_CERF_FLASH_8MB |
| 36 | bool "8MB" |
| 37 | |
| 38 | config SA1100_CERF_FLASH_16MB |
| 39 | bool "16MB" |
| 40 | |
| 41 | config SA1100_CERF_FLASH_32MB |
| 42 | bool "32MB" |
| 43 | |
| 44 | endchoice |
| 45 | |
| 46 | config SA1100_COLLIE |
| 47 | bool "Sharp Zaurus SL5500" |
| 48 | select SHARP_LOCOMO |
| 49 | select SHARP_SCOOP |
| 50 | select SHARP_PARAM |
| 51 | help |
| 52 | Say Y here to support the Sharp Zaurus SL5500 PDAs. |
| 53 | |
| 54 | config SA1100_H3100 |
| 55 | bool "Compaq iPAQ H3100" |
| 56 | help |
| 57 | Say Y here if you intend to run this kernel on the Compaq iPAQ |
| 58 | H3100 handheld computer. Information about this machine and the |
| 59 | Linux port to this machine can be found at: |
| 60 | |
| 61 | <http://www.handhelds.org/Compaq/index.html#iPAQ_H3100> |
| 62 | <http://www.compaq.com/products/handhelds/pocketpc/> |
| 63 | |
| 64 | config SA1100_H3600 |
| 65 | bool "Compaq iPAQ H3600/H3700" |
| 66 | help |
| 67 | Say Y here if you intend to run this kernel on the Compaq iPAQ |
| 68 | H3600 handheld computer. Information about this machine and the |
| 69 | Linux port to this machine can be found at: |
| 70 | |
| 71 | <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600> |
| 72 | <http://www.compaq.com/products/handhelds/pocketpc/> |
| 73 | |
| 74 | config SA1100_H3800 |
| 75 | bool "Compaq iPAQ H3800" |
| 76 | help |
| 77 | Say Y here if you intend to run this kernel on the Compaq iPAQ H3800 |
| 78 | series handheld computer. Information about this machine and the |
| 79 | Linux port to this machine can be found at: |
| 80 | |
| 81 | <http://www.handhelds.org/Compaq/index.html#iPAQ_H3800> |
| 82 | <http://www.compaq.com/products/handhelds/pocketpc/> |
| 83 | |
| 84 | config SA1100_H3XXX |
| 85 | bool |
| 86 | depends on SA1100_H3100 || SA1100_H3600 || SA1100_H3800 |
| 87 | default y |
| 88 | |
| 89 | config SA1100_BADGE4 |
| 90 | bool "HP Labs BadgePAD 4" |
| 91 | select SA1111 |
| 92 | help |
| 93 | Say Y here if you want to build a kernel for the HP Laboratories |
| 94 | BadgePAD 4. |
| 95 | |
| 96 | config SA1100_JORNADA720 |
| 97 | bool "HP Jornada 720" |
| 98 | select SA1111 |
| 99 | help |
| 100 | Say Y here if you want to build a kernel for the HP Jornada 720 |
| 101 | handheld computer. See <http://www.hp.com/jornada/products/720> |
| 102 | for details. |
| 103 | |
| 104 | config SA1100_HACKKIT |
| 105 | bool "HackKit Core CPU Board" |
| 106 | help |
| 107 | Say Y here to support the HackKit Core CPU Board |
| 108 | <http://hackkit.eletztrick.de>; |
| 109 | |
| 110 | config SA1100_LART |
| 111 | bool "LART" |
| 112 | help |
| 113 | Say Y here if you are using the Linux Advanced Radio Terminal |
| 114 | (also known as the LART). See <http://www.lart.tudelft.nl/> for |
| 115 | information on the LART. |
| 116 | |
| 117 | config SA1100_PLEB |
| 118 | bool "PLEB" |
| 119 | help |
| 120 | Say Y here if you are using version 1 of the Portable Linux |
| 121 | Embedded Board (also known as PLEB). |
| 122 | See <http://www.disy.cse.unsw.edu.au/Hardware/PLEB/> |
| 123 | for more information. |
| 124 | |
| 125 | config SA1100_SHANNON |
| 126 | bool "Shannon" |
| 127 | help |
| 128 | The Shannon (also known as a Tuxscreen, and also as a IS2630) was a |
| 129 | limited edition webphone produced by Philips. The Shannon is a SA1100 |
| 130 | platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots, |
| 131 | and a telco interface. |
| 132 | |
| 133 | config SA1100_SIMPAD |
| 134 | bool "Simpad" |
| 135 | help |
| 136 | The SIEMENS webpad SIMpad is based on the StrongARM 1110. There |
| 137 | are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB |
| 138 | FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a |
| 139 | PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same |
| 140 | like CL4 in additional it has a PCMCIA-Slot. For more information |
| 141 | visit <http://www.my-siemens.com/> or <http://www.siemens.ch/>. |
| 142 | |
| 143 | config SA1100_SSP |
| 144 | tristate "Generic PIO SSP" |
| 145 | help |
| 146 | Say Y here to enable support for the generic PIO SSP driver. |
| 147 | This isn't for audio support, but for attached sensors and |
| 148 | other devices, eg for BadgePAD 4 sensor support, or Jornada |
| 149 | 720 touchscreen support. |
| 150 | |
| 151 | config H3600_SLEEVE |
| 152 | tristate "Compaq iPAQ Handheld sleeve support" |
| Dave Neuer | 12035d6 | 2005-06-09 17:40:55 +0100 | [diff] [blame] | 153 | depends on SA1100_H3100 || SA1100_H3600 |
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 154 | help |
| 155 | Choose this option to enable support for extension packs (sleeves) |
| 156 | for the Compaq iPAQ H3XXX series of handheld computers. This option |
| 157 | is required for the CF, PCMCIA, Bluetooth and GSM/GPRS extension |
| 158 | packs. |
| 159 | |
| 160 | endmenu |
| 161 | |
| 162 | endif |