Blame - arch/arm/mach-msm/Kconfig - android_kernel_htc_msm8960

blob: 5663ef7df907ed827be76666f95592a69e8745fd [file] [log] [blame]

Brian Swetland	1637de0	2008-09-09 07:13:33 -0700	[diff] [blame]	1	if ARCH_MSM
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	2
Stepan Moskovchenko	1cd286f	2011-08-03 19:03:02 -0700	[diff] [blame]	3	menu "MSM SoC Type"
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	4
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	5	config ARCH_MSM7X01A
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	6	bool "MSM7x00A / MSM7x01A"
				7	select ARCH_MSM_ARM11
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	8	select MSM_VIC
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	9	select CPU_V6
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	10	select MSM_REMOTE_SPINLOCK_SWP
				11
				12	config ARCH_MSM7X25
				13	bool "MSM7x25"
				14	select ARCH_MSM_ARM11
				15	select MSM_VIC
				16	select CPU_V6
				17	select MSM_REMOTE_SPINLOCK_SWP
Taniya Das	be561a0	2011-10-12 09:53:11 +0530	[diff] [blame]	18	select MULTI_IRQ_HANDLER
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	19
				20	config ARCH_MSM7X27
				21	bool "MSM7x27"
				22	select ARCH_MSM_ARM11 if MSM_SOC_REV_NONE
				23	select ARCH_HAS_BARRIERS if MSM_SOC_REV_NONE
				24	select ARCH_MSM_CORTEX_A5 if MSM_SOC_REV_A
				25	select MSM_VIC
				26	select CPU_V6 if MSM_SOC_REV_NONE
				27	select CPU_V7 if MSM_SOC_REV_A
				28	select MSM_REMOTE_SPINLOCK_SWP if MSM_SOC_REV_NONE
				29	select MSM_GPIOMUX
				30	select REGULATOR
Taniya Das	be561a0	2011-10-12 09:53:11 +0530	[diff] [blame]	31	select MULTI_IRQ_HANDLER
Pankaj Kumar	75c86fd	2011-10-01 18:51:09 +0530	[diff] [blame]	32	select MSM_PROC_COMM_REGULATOR
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	33
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	34	config ARCH_MSM7X30
				35	bool "MSM7x30"
				36	select ARCH_MSM_SCORPION
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	37	select MSM_VIC
				38	select CPU_V7
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	39	select MSM_REMOTE_SPINLOCK_DEKKERS
				40	select ARCH_SPARSEMEM_ENABLE
Laura Abbott	78593b5	2011-09-26 18:48:14 -0700	[diff] [blame]	41	select ARCH_HAS_HOLES_MEMORYMODEL
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	42	select MEMORY_HOTPLUG
				43	select MEMORY_HOTREMOVE
				44	select MIGRATION
				45	select ARCH_MEMORY_PROBE
				46	select ARCH_MEMORY_REMOVE
Gregory Bean	ab78cde	2010-09-01 16:26:12 -0700	[diff] [blame]	47	select MSM_GPIOMUX
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	48	select RESERVE_FIRST_PAGE
				49	select MSM_DALRPC
				50	select MSM_SPM_V1
				51	select REGULATOR
Justin Paupore	637a25d	2011-07-14 17:11:04 -0700	[diff] [blame]	52	select MSM_PROC_COMM_REGULATOR
Taniya Das	bae99fb	2011-10-12 09:55:13 +0530	[diff] [blame]	53	select MULTI_IRQ_HANDLER
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	54
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	55	config ARCH_QSD8X50
				56	bool "QSD8X50"
				57	select ARCH_MSM_SCORPION
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	58	select MSM_VIC
				59	select CPU_V7
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	60	select MSM_REMOTE_SPINLOCK_LDREX
				61	select CPU_USE_DOMAINS
				62	select EMULATE_DOMAIN_MANAGER_V7
Gregory Bean	ab78cde	2010-09-01 16:26:12 -0700	[diff] [blame]	63	select MSM_GPIOMUX
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	64	select MSM_DALRPC
Daniel Walker	46fe5f2	2010-08-18 11:00:25 -0700	[diff] [blame]	65
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	66	config ARCH_MSM8X60
				67	bool "MSM8X60"
Jeff Ohlstein	e14411d	2010-11-30 13:06:36 -0800	[diff] [blame]	68	select ARCH_MSM_SCORPIONMP
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	69	select SMP_PARALLEL_START if SMP
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	70	select ARM_GIC
				71	select CPU_V7
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	72	select MSM_REMOTE_SPINLOCK_LDREX
				73	select ARCH_REQUIRE_GPIOLIB
				74	select MSM_ADM3
				75	select REGULATOR
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	76	select MSM_V2_TLMM
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	77	select MSM_PIL
				78	select MSM_SCM
				79	select ARCH_HAS_CPU_IDLE_WAIT
				80	select MSM_DIRECT_SCLK_ACCESS
				81	select MSM_RPM
				82	select MSM_XO
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	83	select MSM_GPIOMUX
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	84	select MSM_BUS_SCALING
				85	select MSM_SECURE_IO
				86	select MSM_DALRPC
				87	select MSM_QDSP6_APR
				88	select MSM_NATIVE_RESTART
				89	select ARCH_INLINE_SPIN_TRYLOCK
				90	select ARCH_INLINE_SPIN_TRYLOCK_BH
				91	select ARCH_INLINE_SPIN_LOCK
				92	select ARCH_INLINE_SPIN_LOCK_BH
				93	select ARCH_INLINE_SPIN_LOCK_IRQ
				94	select ARCH_INLINE_SPIN_LOCK_IRQSAVE
				95	select ARCH_INLINE_SPIN_UNLOCK
				96	select ARCH_INLINE_SPIN_UNLOCK_BH
				97	select ARCH_INLINE_SPIN_UNLOCK_IRQ
				98	select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
				99	select ARCH_INLINE_READ_TRYLOCK
				100	select ARCH_INLINE_READ_LOCK
				101	select ARCH_INLINE_READ_LOCK_BH
				102	select ARCH_INLINE_READ_LOCK_IRQ
				103	select ARCH_INLINE_READ_LOCK_IRQSAVE
				104	select ARCH_INLINE_READ_UNLOCK
				105	select ARCH_INLINE_READ_UNLOCK_BH
				106	select ARCH_INLINE_READ_UNLOCK_IRQ
				107	select ARCH_INLINE_READ_UNLOCK_IRQRESTORE
				108	select ARCH_INLINE_WRITE_TRYLOCK
				109	select ARCH_INLINE_WRITE_LOCK
				110	select ARCH_INLINE_WRITE_LOCK_BH
				111	select ARCH_INLINE_WRITE_LOCK_IRQ
				112	select ARCH_INLINE_WRITE_LOCK_IRQSAVE
				113	select ARCH_INLINE_WRITE_UNLOCK
				114	select ARCH_INLINE_WRITE_UNLOCK_BH
				115	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
				116	select CPU_HAS_L2_PMU
				117	select MSM_SPM_V1
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	118
Stepan Moskovchenko	f441ca2	2010-12-01 19:31:16 -0800	[diff] [blame]	119	config ARCH_MSM8960
				120	bool "MSM8960"
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	121	select ARCH_MSM_KRAITMP
Stepan Moskovchenko	f441ca2	2010-12-01 19:31:16 -0800	[diff] [blame]	122	select ARM_GIC
				123	select CPU_V7
				124	select MSM_V2_TLMM
				125	select MSM_GPIOMUX
				126	select MSM_SCM if SMP
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	127	select MSM_DIRECT_SCLK_ACCESS
				128	select REGULATOR
				129	select MSM_RPM
				130	select MSM_XO
				131	select MSM_QDSP6_APR
				132	select MSM_PIL
				133	select MSM_AUDIO_QDSP6 if SND_SOC
				134	select CPU_HAS_L2_PMU
				135	select MSM_SPM_V2
Pratik Patel	fd6f56a	2011-10-10 17:47:55 -0700	[diff] [blame]	136	select HAS_QDSS
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	137	select MSM_L2_SPM
				138	select MSM_NATIVE_RESTART
Stepan Moskovchenko	082952d	2011-10-18 17:27:08 -0700	[diff] [blame]	139	select DONT_MAP_HOLE_AFTER_MEMBANK0
				140	select MSM_REMOTE_SPINLOCK_SFPB
				141	select ARCH_POPULATES_NODE_MAP
				142	select ARCH_SPARSEMEM_ENABLE
				143	select ARCH_HAS_HOLES_MEMORYMODEL
				144	select MEMORY_HOTPLUG
				145	select MEMORY_HOTREMOVE
				146	select MIGRATION
				147	select ARCH_MEMORY_PROBE
				148	select ARCH_MEMORY_REMOVE
				149	select DONT_RESERVE_FROM_MOVABLE_ZONE
				150
				151	config ARCH_MSM8930
				152	bool "MSM8930"
				153	select ARCH_MSM_KRAITMP
				154	select ARM_GIC
				155	select CPU_V7
				156	select MSM_V2_TLMM
				157	select MSM_GPIOMUX
				158	select MSM_SCM if SMP
				159	select MSM_DIRECT_SCLK_ACCESS
				160	select REGULATOR
				161	select MSM_RPM
				162	select MSM_XO
				163	select MSM_QDSP6_APR
				164	select MSM_PIL
				165	select MSM_AUDIO_QDSP6 if SND_SOC
				166	select CPU_HAS_L2_PMU
				167	select MSM_SPM_V2
				168	select MSM_L2_SPM
				169	select MSM_NATIVE_RESTART
				170	select DONT_MAP_HOLE_AFTER_MEMBANK0
Eric Holmberg	eab1073	2011-09-23 19:44:43 -0600	[diff] [blame]	171	select MSM_REMOTE_SPINLOCK_SFPB
Larry Bassel	f74479e	2011-09-08 11:07:52 -0700	[diff] [blame]	172	select ARCH_POPULATES_NODE_MAP
				173	select ARCH_SPARSEMEM_ENABLE
				174	select ARCH_HAS_HOLES_MEMORYMODEL
				175	select MEMORY_HOTPLUG
				176	select MEMORY_HOTREMOVE
				177	select MIGRATION
				178	select ARCH_MEMORY_PROBE
				179	select ARCH_MEMORY_REMOVE
Baruch Eruchimovitch	e9cbfc1	2011-10-09 19:47:08 +0200	[diff] [blame]	180	select DONT_RESERVE_FROM_MOVABLE_ZONE
				181	select MSM_ULTRASOUND
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	182
				183	config ARCH_APQ8064
				184	bool "APQ8064"
				185	select ARCH_MSM_KRAITMP
Stepan Moskovchenko	d256ddf	2011-09-08 12:34:46 -0700	[diff] [blame]	186	select MACH_APQ8064_SIM if !MACH_APQ8064_RUMI3
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	187	select MSM_V2_TLMM
				188	select ARM_GIC
				189	select CPU_V7
				190	select MSM_SCM if SMP
Joel King	4ebccc6	2011-07-22 09:43:22 -0700	[diff] [blame]	191	select MSM_GPIOMUX
Eric Holmberg	40d2188	2011-09-27 09:42:03 -0600	[diff] [blame]	192	select MSM_REMOTE_SPINLOCK_SFPB
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	193
Sathish Ambley	d4efc76	2011-10-09 22:19:22 -0700	[diff] [blame]	194	config ARCH_MSMCOPPER
				195	bool "MSM Copper"
				196	select ARCH_MSM_KRAITMP
				197	select MSM_V2_TLMM
				198	select ARM_GIC
				199	select CPU_V7
				200	select MSM_SCM if SMP
				201	select MSM_GPIOMUX
				202
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	203	config ARCH_FSM9XXX
				204	bool "FSM9XXX"
				205	select ARCH_MSM_SCORPION
				206	select MSM_VIC
				207	select CPU_V7
				208	select MSM_REMOTE_SPINLOCK_LDREX
				209	select FSM9XXX_TLMM
Stepan Moskovchenko	f441ca2	2010-12-01 19:31:16 -0800	[diff] [blame]	210
Rohit Vaswani	ddeb52a	2011-08-16 12:26:32 -0700	[diff] [blame]	211	config ARCH_MSM9615
				212	bool "MSM9615"
				213	select ARM_GIC
				214	select ARCH_MSM_CORTEX_A5
				215	select CPU_V7
				216	select MSM_V2_TLMM
				217	select MSM_GPIOMUX
Praveen Chidambaram	ab3b1c4	2011-08-25 08:44:05 -0600	[diff] [blame]	218	select MSM_RPM
Maheshkumar Sivasubramanian	738b458	2011-09-06 17:26:24 -0600	[diff] [blame]	219	select MSM_SPM_V2
Rohit Vaswani	f688fa6	2011-10-13 18:13:10 -0700	[diff] [blame]	220	select MSM_NATIVE_RESTART
Stepan Moskovchenko	1cd286f	2011-08-03 19:03:02 -0700	[diff] [blame]	221	endmenu
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	222
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	223	choice
				224	prompt "MSM SoC Revision"
				225	default MSM_SOC_REV_NONE
				226	config MSM_SOC_REV_NONE
				227	bool "N/A"
				228	select EMULATE_DOMAIN_MANAGER_V7 if ARCH_QSD8X50
				229	select VERIFY_PERMISSION_FAULT if ARCH_QSD8X50
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	230	config MSM_SOC_REV_A
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	231	bool "Rev. A"
				232	select ARCH_MSM7X27A if ARCH_MSM7X27
				233	endchoice
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	234
Stepan Moskovchenko	00da074	2011-07-08 14:06:44 -0700	[diff] [blame]	235	config MSM_KRAIT_TBB_ABORT_HANDLER
				236	bool "Krait TBB/TBH data abort handler"
				237	depends on ARCH_MSM_KRAIT
				238	depends on ARM_THUMB
				239	help
				240	Certain early samples of the Krait processor may generate data
				241	aborts for TBB / TBH instructions that fail their condition code
				242	checks. Enabling this option will ignore these erroneous data aborts,
				243	at the expense of a very small performance penalty.
				244
				245	If unsure, say N.
				246
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	247	config ARCH_MSM_ARM11
				248	bool
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	249
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	250	config ARCH_MSM_SCORPION
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	251	bool
				252
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	253	config ARCH_MSM_KRAIT
Daniel Walker	46fe5f2	2010-08-18 11:00:25 -0700	[diff] [blame]	254	bool
Stephen Boyd	51cabbe	2011-12-02 13:28:56 -0800	[diff] [blame^]	255	select ARM_L1_CACHE_SHIFT_6
Daniel Walker	46fe5f2	2010-08-18 11:00:25 -0700	[diff] [blame]	256
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	257	config MSM_SMP
				258	bool
				259
				260	config ARCH_MSM_SCORPIONMP
				261	select ARCH_MSM_SCORPION
				262	select MSM_SMP
				263	bool
				264
				265	config ARCH_MSM_KRAITMP
				266	select ARCH_MSM_KRAIT
				267	select MSM_SMP
				268	bool
				269
				270	config ARCH_MSM_CORTEX_A5
				271	bool
				272	select HAVE_HW_BRKPT_RESERVED_RW_ACCESS
				273
				274	config ARCH_MSM7X27A
				275	bool
				276	select MSM_DALRPC
Justin Paupore	b3a33b7	2011-08-23 15:30:32 -0700	[diff] [blame]	277	select MSM_PROC_COMM_REGULATOR
Taniya Das	86e0e13	2011-10-19 11:32:00 +0530	[diff] [blame]	278	select MULTI_IRQ_HANDLER
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	279
Gregory Bean	f9f3d31	2010-04-30 22:06:50 -0700	[diff] [blame]	280	config MSM_VIC
				281	bool
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	282
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	283	config MSM_RPM
				284	bool "Resource Power Manager"
				285	select MSM_MPM
				286
				287	config MSM_MPM
				288	bool "Modem Power Manager"
				289
				290	config MSM_XO
				291	bool
				292
				293	config MSM_REMOTE_SPINLOCK_DEKKERS
				294	bool
				295	config MSM_REMOTE_SPINLOCK_SWP
				296	bool
				297	config MSM_REMOTE_SPINLOCK_LDREX
				298	bool
Eric Holmberg	eab1073	2011-09-23 19:44:43 -0600	[diff] [blame]	299	config MSM_REMOTE_SPINLOCK_SFPB
				300	bool
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	301	config MSM_ADM3
				302	bool
				303
				304	menu "MSM Board Selection"
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	305
				306	config MACH_HALIBUT
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	307	depends on ARCH_MSM7X01A
				308	depends on MSM_STACKED_MEMORY
				309	default y
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	310	bool "Halibut Board (QCT SURF7201A)"
				311	help
				312	Support for the Qualcomm SURF7201A eval board.
				313
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	314	config MACH_MSM7201A_SURF
				315	depends on ARCH_MSM7X01A
				316	depends on MSM_STACKED_MEMORY
				317	default y
				318	bool "MSM7201A SURF"
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	319	help
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	320	Support for the Qualcomm MSM7201A SURF eval board.
				321
				322	config MACH_MSM7201A_FFA
				323	depends on ARCH_MSM7X01A
				324	depends on MSM_STACKED_MEMORY
				325	default y
				326	bool "MSM7201A FFA"
				327	help
				328	Support for the Qualcomm MSM7201A FFA eval board.
				329
				330	config MACH_TROUT
				331	depends on ARCH_MSM7X01A
				332	depends on MSM_STACKED_MEMORY
				333	default y
				334	bool "Trout"
				335
				336	config MACH_MSM7X27_SURF
				337	depends on ARCH_MSM7X27
				338	depends on !MSM_STACKED_MEMORY
				339	default y
				340	bool "MSM7x27 SURF"
				341	help
				342	Support for the Qualcomm MSM7x27 SURF eval board.
				343
				344	config MACH_MSM7X27_FFA
				345	depends on ARCH_MSM7X27
				346	depends on !MSM_STACKED_MEMORY
				347	default y
				348	bool "MSM7x27 FFA"
				349	help
				350	Support for the Qualcomm MSM7x27 FFA eval board.
				351
				352	config MACH_MSM7X27A_RUMI3
				353	depends on ARCH_MSM7X27A
				354	depends on !MSM_STACKED_MEMORY
				355	default y
				356	bool "MSM7x27A RUMI3"
				357	help
				358	Support for the Qualcomm MSM7x27A RUMI3 Emulation Platform.
				359
				360	config MACH_MSM7X27A_SURF
				361	depends on ARCH_MSM7X27A
				362	depends on !MSM_STACKED_MEMORY
				363	default y
				364	bool "MSM7x27A SURF"
				365	help
				366	Support for the Qualcomm MSM7x27A SURF.
				367
				368	config MACH_MSM7X27A_FFA
				369	depends on ARCH_MSM7X27A
				370	depends on !MSM_STACKED_MEMORY
				371	default y
				372	bool "MSM7x27A FFA"
				373	help
				374	Support for the Qualcomm MSM7x27A FFA.
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	375
Trilok Soni	3d0f6c5	2011-07-26 16:06:58 +0530	[diff] [blame]	376	config MACH_MSM7625A_SURF
				377	depends on ARCH_MSM7X27A
				378	depends on !MSM_STACKED_MEMORY
				379	default y
				380	bool "MSM7625A SURF"
				381	help
				382	Support for the Qualcomm MSM7625A SURF.
				383
				384	config MACH_MSM7625A_FFA
				385	depends on ARCH_MSM7X27A
				386	depends on !MSM_STACKED_MEMORY
				387	default y
				388	bool "MSM7625A FFA"
				389	help
				390	Support for the Qualcomm MSM7625A FFA.
				391
Taniya Das	c98bfbc	2011-08-23 09:58:55 +0530	[diff] [blame]	392	config MACH_MSM7627A_QRD1
				393	depends on ARCH_MSM7X27A
				394	depends on !MSM_STACKED_MEMORY
				395	default y
				396	bool "MSM7627A QRD1"
				397	help
				398	Support for the Qualcomm MSM7627A Refrence Design.
				399
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	400	config MACH_MSM7X30_SURF
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	401	depends on ARCH_MSM7X30
				402	depends on !MSM_STACKED_MEMORY
				403	default y
				404	bool "MSM7x30 SURF"
				405	help
				406	Support for the Qualcomm MSM7x30 SURF eval board.
				407
				408	config MACH_MSM7X30_FFA
				409	depends on ARCH_MSM7X30
				410	depends on !MSM_STACKED_MEMORY
				411	default y
				412	bool "MSM7x30 FFA"
				413	help
				414	Support for the Qualcomm MSM7x30 FFA eval board.
				415
				416	config MACH_MSM7X30_FLUID
				417	depends on ARCH_MSM7X30
				418	depends on !MSM_STACKED_MEMORY
				419	default y
				420	bool "MSM7x30 FLUID"
				421	help
				422	Support for the Qualcomm MSM7x30 FLUID eval board.
				423
				424	config MACH_SAPPHIRE
				425	depends on ARCH_MSM7X01A
				426	default n
				427	bool "Sapphire"
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	428
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	429	config MACH_QSD8X50_SURF
				430	depends on ARCH_QSD8X50
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	431	depends on MSM_SOC_REV_NONE
				432	depends on MSM_STACKED_MEMORY
				433	default y
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	434	bool "QSD8x50 SURF"
				435	help
				436	Support for the Qualcomm QSD8x50 SURF eval board.
				437
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	438	config MACH_QSD8X50_FFA
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	439	depends on ARCH_QSD8X50
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	440	depends on MSM_SOC_REV_NONE
				441	depends on MSM_STACKED_MEMORY
				442	default y
				443	bool "QSD8x50 FFA"
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	444	help
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	445	Support for the Qualcomm QSD8x50 FFA eval board.
				446
				447	config MACH_MSM7X25_SURF
				448	depends on ARCH_MSM7X25
				449	depends on !MSM_STACKED_MEMORY
				450	default y
				451	bool "MSM7x25 SURF"
				452	help
				453	Support for the Qualcomm MSM7x25 SURF eval board.
				454
				455	config MACH_MSM7X25_FFA
				456	depends on ARCH_MSM7X25
				457	depends on !MSM_STACKED_MEMORY
				458	default y
				459	bool "MSM7x25 FFA"
				460	help
				461	Support for the Qualcomm MSM7x25 FFA eval board.
				462
				463	config MACH_MSM8X55_SURF
				464	depends on ARCH_MSM7X30
				465	depends on !MSM_STACKED_MEMORY
				466	default y
				467	bool "MSM8X55 SURF"
				468	help
				469	Support for the Qualcomm MSM8x55 SURF eval board.
				470
				471	config MACH_MSM8X55_FFA
				472	depends on ARCH_MSM7X30
				473	depends on !MSM_STACKED_MEMORY
				474	default y
				475	bool "MSM8X55 FFA"
				476	help
				477	Support for the Qualcomm MSM8x55 FFA eval board.
				478
				479	config MACH_MSM8X55_SVLTE_FFA
				480	depends on ARCH_MSM7X30
				481	depends on !MSM_STACKED_MEMORY
				482	default y
				483	bool "MSM8X55 SVLTE FFA"
				484	help
				485	Support for the Qualcomm MSM8x55 SVLTE FFA eval board.
				486
				487	config MACH_MSM8X55_SVLTE_SURF
				488	depends on ARCH_MSM7X30
				489	depends on !MSM_STACKED_MEMORY
				490	default y
				491	bool "MSM8X55 SVLTE SURF"
				492	help
				493	Support for the Qualcomm MSM8x55 SVLTE SURF eval board.
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	494
Steve Muckle	a55df6e	2010-01-07 12:43:24 -0800	[diff] [blame]	495	config MACH_MSM8X60_RUMI3
				496	depends on ARCH_MSM8X60
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	497	default n
Steve Muckle	a55df6e	2010-01-07 12:43:24 -0800	[diff] [blame]	498	bool "MSM8x60 RUMI3"
				499	help
				500	Support for the Qualcomm MSM8x60 RUMI3 emulator.
				501
Steve Muckle	57bbf1c	2010-01-07 12:51:10 -0800	[diff] [blame]	502	config MACH_MSM8X60_SIM
				503	depends on ARCH_MSM8X60
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	504	default n
Steve Muckle	57bbf1c	2010-01-07 12:51:10 -0800	[diff] [blame]	505	bool "MSM8x60 Simulator"
				506	help
				507	Support for the Qualcomm MSM8x60 simulator.
				508
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	509	config MACH_MSM8X60_SURF
				510	depends on ARCH_MSM8X60
				511	default n
				512	bool "MSM8x60 SURF"
				513	help
				514	Support for the Qualcomm MSM8x60 SURF eval board.
				515
Gregory Bean	69b7f6f	2010-04-04 22:29:02 -0700	[diff] [blame]	516	config MACH_MSM8X60_FFA
				517	depends on ARCH_MSM8X60
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	518	default n
Gregory Bean	69b7f6f	2010-04-04 22:29:02 -0700	[diff] [blame]	519	bool "MSM8x60 FFA"
				520	help
				521	Support for the Qualcomm MSM8x60 FFA eval board.
				522
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	523	config MACH_MSM8X60_FLUID
				524	depends on ARCH_MSM8X60
				525	default n
				526	bool "MSM8x60 FLUID"
				527	help
				528	Support for the Qualcomm MSM8x60 FLUID platform. The FLUID is an
				529	8x60 target which has a form factor that is much closer to that
				530	of a phone than other targets. It also has a new display and
				531	touchscreen controller.
				532
				533	config MACH_MSM8X60_FUSION
				534	depends on ARCH_MSM8X60
				535	default n
				536	bool "MSM8x60 FUSION"
				537	help
				538	Support for the Qualcomm MSM8x60 Fusion SURF device.
				539
				540	config MACH_MSM8X60_FUSN_FFA
				541	depends on ARCH_MSM8X60
				542	default n
				543	bool "MSM8x60 FUSN FFA"
				544	help
				545	Support for the Qualcomm MSM8x60 Fusion FFA device.
				546
Zhang Chang Ken	ef05b17	2011-07-27 15:28:13 -0400	[diff] [blame]	547	config MACH_MSM8X60_DRAGON
				548	depends on ARCH_MSM8X60
				549	default n
				550	bool "MSM8x60 DRAGON"
				551	help
				552	Support for the Qualcomm MSM8x60 Dragon board.
				553
Stepan Moskovchenko	f441ca2	2010-12-01 19:31:16 -0800	[diff] [blame]	554	config MACH_MSM8960_SIM
				555	depends on ARCH_MSM8960
				556	bool "MSM8960 Simulator"
				557	help
				558	Support for the Qualcomm MSM8960 simulator.
				559
Stepan Moskovchenko	50ede4e	2010-12-13 18:12:19 -0800	[diff] [blame]	560	config MACH_MSM8960_RUMI3
				561	depends on ARCH_MSM8960
				562	bool "MSM8960 RUMI3"
				563	help
				564	Support for the Qualcomm MSM8960 RUMI3 emulator.
				565
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	566	config MACH_MSM8960_CDP
				567	depends on ARCH_MSM8960
				568	bool "MSM8960 CDP"
				569	help
				570	Support for the Qualcomm MSM8960 CDP device.
				571
				572	config MACH_MSM8960_MTP
				573	depends on ARCH_MSM8960
				574	bool "MSM8960 MTP"
				575	help
				576	Support for the Qualcomm MSM8960 MTP device.
				577
				578	config MACH_MSM8960_FLUID
				579	depends on ARCH_MSM8960
				580	bool "MSM8960 FLUID"
				581	help
				582	Support for the Qualcomm MSM8960 FLUID device.
				583
Amir Samuelov	0d1f8ae	2011-07-28 11:13:58 +0300	[diff] [blame]	584	config MACH_MSM8960_LIQUID
				585	depends on ARCH_MSM8960
				586	bool "MSM8960 LIQUID"
				587	help
				588	Support for the Qualcomm MSM8960 LIQUID device.
				589
Stepan Moskovchenko	082952d	2011-10-18 17:27:08 -0700	[diff] [blame]	590	config MACH_MSM8930_CDP
				591	depends on ARCH_MSM8930
				592	bool "MSM8930 CDP"
				593	help
				594	Support for the Qualcomm MSM8930 CDP device.
				595
				596	config MACH_MSM8930_MTP
				597	depends on ARCH_MSM8930
				598	bool "MSM8930 MTP"
				599	help
				600	Support for the Qualcomm MSM8930 MTP device.
				601
				602	config MACH_MSM8930_FLUID
				603	depends on ARCH_MSM8930
				604	bool "MSM8930 FLUID"
				605	help
				606	Support for the Qualcomm MSM8930 FLUID device.
				607
Stepan Moskovchenko	8768eff	2011-12-01 18:55:07 -0800	[diff] [blame]	608	config MACH_MSM8627_CDP
				609	depends on ARCH_MSM8930
				610	bool "MSM8627 CDP"
				611	help
				612	Support for the Qualcomm MSM8627 CDP device.
				613
				614	config MACH_MSM8627_MTP
				615	depends on ARCH_MSM8930
				616	bool "MSM8627 MTP"
				617	help
				618	Support for the Qualcomm MSM8627 MTP device.
				619
Rohit Vaswani	a8e7a83	2011-09-28 21:00:05 -0700	[diff] [blame]	620	config MACH_MSM9615_CDP
				621	depends on ARCH_MSM9615
				622	bool "MSM9615 CDP"
				623	help
				624	Support for the Qualcomm MSM9615 CDP device.
				625
				626	config MACH_MSM9615_MTP
				627	depends on ARCH_MSM9615
				628	bool "MSM9615 MTP"
				629	help
				630	Support for the Qualcomm MSM9615 MTP device.
				631
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	632	config MSM_USE_TSIF1
				633	depends on ARCH_MSM8X60
				634	bool "MSM8x60 use TSIF1"
				635	help
				636	Selects TSIF1 core to be used rather than TSIF0.
				637	The two TSIF cores share the same DM configuration
				638	so they cannot be used simultaneously.
				639
				640	config MACH_APQ8064_SIM
				641	depends on ARCH_APQ8064
				642	bool "APQ8064 Simulator"
				643	help
				644	Support for the Qualcomm APQ8064 simulator.
				645
Stepan Moskovchenko	d256ddf	2011-09-08 12:34:46 -0700	[diff] [blame]	646	config MACH_APQ8064_RUMI3
				647	depends on ARCH_APQ8064
				648	bool "APQ8064 RUMI3"
				649	help
				650	Support for the Qualcomm APQ8064 RUMI3 emulator.
				651
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	652	config MACH_FSM9XXX_SURF
				653	depends on ARCH_FSM9XXX
				654	depends on !MSM_STACKED_MEMORY
				655	default y
				656	bool "FSM9XXX SURF"
				657	help
				658	Support for the Qualcomm FSM9xxx femtocell
				659	chipset based SURF evaluation board and
				660	FFA board.
				661
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	662	endmenu
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	663
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	664	config MSM_STACKED_MEMORY
				665	bool "Stacked Memory"
				666	default y
Stepan Moskovchenko	24f6173	2011-02-11 12:28:16 -0800	[diff] [blame]	667	help
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	668	This option is used to indicate the presence of on-die stacked
				669	memory. When present this memory bank is used for a high speed
				670	shared memory interface. When not present regular RAM is used.
Stepan Moskovchenko	24f6173	2011-02-11 12:28:16 -0800	[diff] [blame]	671
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	672	config PHYS_OFFSET
				673	hex
Rohit Vaswani	ddeb52a	2011-08-16 12:26:32 -0700	[diff] [blame]	674	default "0x40800000" if ARCH_MSM9615
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	675	default "0x80200000" if ARCH_APQ8064
				676	default "0x80200000" if ARCH_MSM8960
Stepan Moskovchenko	082952d	2011-10-18 17:27:08 -0700	[diff] [blame]	677	default "0x80200000" if ARCH_MSM8930
Sathish Ambley	d4efc76	2011-10-09 22:19:22 -0700	[diff] [blame]	678	default "0x80200000" if ARCH_MSMCOPPER
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	679	default "0x10000000" if ARCH_FSM9XXX
				680	default "0x00200000" if !MSM_STACKED_MEMORY
				681	default "0x00000000" if ARCH_QSD8X50 && MSM_SOC_REV_A
				682	default "0x20000000" if ARCH_QSD8X50
				683	default "0x40200000" if ARCH_MSM8X60
				684	default "0x10000000"
Stepan Moskovchenko	24f6173	2011-02-11 12:28:16 -0800	[diff] [blame]	685
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	686	config KERNEL_PMEM_EBI_REGION
				687	bool "Enable in-kernel PMEM region for EBI"
				688	default y if ARCH_MSM8X60
				689	depends on ANDROID_PMEM && (ARCH_MSM8X60 \|\| ARCH_MSM8960)
				690	help
				691	Enable the in-kernel PMEM allocator to use EBI memory.
				692
				693	config KERNEL_PMEM_SMI_REGION
				694	bool "Enable in-kernel PMEM region for SMI"
				695	default y if ARCH_MSM8X60
				696	depends on ANDROID_PMEM && ((ARCH_QSD8X50 && !PMEM_GPU0) \|\| (ARCH_MSM8X60 && !VCM))
				697	help
				698	Enable the in-kernel PMEM allocator to use SMI memory.
				699
				700	config PMEM_GPU0
				701	bool "Enable PMEM GPU0 region"
				702	default y
				703	depends on ARCH_QSD8X50 && ANDROID_PMEM
				704	help
				705	Enable the PMEM GPU0 device on SMI Memory.
				706
				707	config MSM_AMSS_VERSION
				708	int
				709	default 6210 if MSM_AMSS_VERSION_6210
				710	default 6220 if MSM_AMSS_VERSION_6220
				711	default 6225 if MSM_AMSS_VERSION_6225
				712
				713	choice
				714	prompt "AMSS modem firmware version"
				715
				716	default MSM_AMSS_VERSION_6225
				717
				718	config MSM_AMSS_VERSION_6210
				719	bool "6.2.10"
				720
				721	config MSM_AMSS_VERSION_6220
				722	bool "6.2.20"
				723
				724	config MSM_AMSS_VERSION_6225
				725	bool "6.2.20 + New ADSP"
				726	endchoice
Stepan Moskovchenko	2607b0a	2010-11-15 17:46:10 -0800	[diff] [blame]	727
Sathish Ambley	f5bebd6	2011-11-03 23:36:36 -0700	[diff] [blame]	728	config MSM_HAS_DEBUG_UART_HS
				729	bool
				730	help
				731	Say Y here if high speed MSM UART is present.
				732
				733	config MSM_HAS_DEBUG_UART_HS_V14
				734	bool
				735	select MSM_HAS_DEBUG_UART_HS
				736	help
				737	Say Y here if high speed MSM UART v1.4 is present.
				738
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	739	config DEBUG_MSM8930_UART
				740	bool "Kernel low-level debugging messages via MSM 8930 UART"
				741	depends on ARCH_MSM8930 && DEBUG_LL
Sathish Ambley	f5bebd6	2011-11-03 23:36:36 -0700	[diff] [blame]	742	select MSM_HAS_DEBUG_UART_HS
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	743	help
				744	Say Y here if you want the debug print routines to direct
				745	their output to the serial port on MSM 8930 devices.
Pavel Machek	6339f66	2009-11-02 11:48:29 +0100	[diff] [blame]	746
				747	choice
				748	prompt "Debug UART"
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	749	depends on DEBUG_LL
Pavel Machek	6339f66	2009-11-02 11:48:29 +0100	[diff] [blame]	750
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	751	config DEBUG_MSM_UART1
				752	bool "Kernel low-level debugging messages via MSM UART1"
				753	depends on ARCH_MSM7X00A \|\| ARCH_MSM7X30 \|\| ARCH_QSD8X50
				754	help
				755	Say Y here if you want the debug print routines to direct
				756	their output to the first serial port on MSM devices.
Pavel Machek	6339f66	2009-11-02 11:48:29 +0100	[diff] [blame]	757
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	758	config DEBUG_MSM_UART2
				759	bool "Kernel low-level debugging messages via MSM UART2"
				760	depends on ARCH_MSM7X00A \|\| ARCH_MSM7X30 \|\| ARCH_QSD8X50
				761	help
				762	Say Y here if you want the debug print routines to direct
				763	their output to the second serial port on MSM devices.
Pavel Machek	6339f66	2009-11-02 11:48:29 +0100	[diff] [blame]	764
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	765	config DEBUG_MSM_UART3
				766	bool "Kernel low-level debugging messages via MSM UART3"
				767	depends on ARCH_MSM7X00A \|\| ARCH_MSM7X30 \|\| ARCH_QSD8X50
				768	help
				769	Say Y here if you want the debug print routines to direct
				770	their output to the third serial port on MSM devices.
Pavel Machek	6339f66	2009-11-02 11:48:29 +0100	[diff] [blame]	771
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	772	config DEBUG_MSM8660_UART
				773	bool "Kernel low-level debugging messages via MSM 8660 UART"
				774	depends on ARCH_MSM8X60
Sathish Ambley	f5bebd6	2011-11-03 23:36:36 -0700	[diff] [blame]	775	select MSM_HAS_DEBUG_UART_HS
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	776	help
				777	Say Y here if you want the debug print routines to direct
				778	their output to the serial port on MSM 8660 devices.
Pavel Machek	6339f66	2009-11-02 11:48:29 +0100	[diff] [blame]	779
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	780	config DEBUG_MSM8960_UART
				781	bool "Kernel low-level debugging messages via MSM 8960 UART"
				782	depends on ARCH_MSM8960
				783	select DEBUG_MSM8930_UART
Sathish Ambley	f5bebd6	2011-11-03 23:36:36 -0700	[diff] [blame]	784	select MSM_HAS_DEBUG_UART_HS
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	785	help
				786	Say Y here if you want the debug print routines to direct
				787	their output to the serial port on MSM 8960 devices.
Sathish Ambley	f5bebd6	2011-11-03 23:36:36 -0700	[diff] [blame]	788
				789	config DEBUG_MSMCOPPER_UART
				790	bool "Kernel low-level debugging messages via MSM Copper UART"
				791	depends on ARCH_MSMCOPPER
				792	select MSM_HAS_DEBUG_UART_HS_V14
				793	help
				794	Say Y here if you want the debug print routines to direct
				795	their output to the serial port on MSM Copper devices.
Pavel Machek	6339f66	2009-11-02 11:48:29 +0100	[diff] [blame]	796	endchoice
				797
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	798	choice
				799	prompt "Default Timer"
				800	default MSM7X00A_USE_GP_TIMER
				801
				802	config MSM7X00A_USE_GP_TIMER
				803	bool "GP Timer"
				804	help
				805	Low resolution timer that allows power collapse from idle.
				806
				807	config MSM7X00A_USE_DG_TIMER
				808	bool "DG Timer"
				809	help
				810	High resolution timer.
				811	endchoice
				812
				813	choice
				814	prompt "Suspend sleep mode"
				815	default MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				816	help
				817	Allows overriding the sleep mode used. Leave at power
				818	collapse suspend unless the arm9 image has problems.
				819
				820	config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				821	bool "Power collapse suspend"
				822	help
				823	Lowest sleep state. Returns through reset vector.
				824
				825	config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
				826	bool "Power collapse"
				827	help
				828	Sleep state that returns through reset vector.
				829
				830	config MSM7X00A_SLEEP_MODE_APPS_SLEEP
				831	bool "Apps Sleep"
				832
				833	config MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
				834	bool "Ramp down cpu clock and wait for interrupt"
				835
				836	config MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
				837	bool "Wait for interrupt"
				838	endchoice
				839
				840	config MSM7X00A_SLEEP_MODE
				841	int
				842	default 0 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				843	default 1 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
				844	default 2 if MSM7X00A_SLEEP_MODE_APPS_SLEEP
				845	default 3 if MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
				846	default 4 if MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
				847
				848	choice
				849	prompt "Idle sleep mode"
				850	default MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
				851	help
				852	Allows overriding the sleep mode used from idle. Leave at power
				853	collapse suspend unless the arm9 image has problems.
				854
				855	config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				856	bool "Power collapse suspend"
				857	help
				858	Lowest sleep state. Returns through reset vector.
				859
				860	config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
				861	bool "Power collapse"
				862	help
				863	Sleep state that returns through reset vector.
				864
				865	config MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
				866	bool "Apps Sleep"
				867
				868	config MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
				869	bool "Ramp down cpu clock and wait for interrupt"
				870
				871	config MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
				872	bool "Wait for interrupt"
				873	endchoice
				874
				875	config MSM7X00A_IDLE_SLEEP_MODE
				876	int
				877	default 0 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				878	default 1 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
				879	default 2 if MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
				880	default 3 if MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
				881	default 4 if MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
				882
				883	config MSM7X00A_IDLE_SLEEP_MIN_TIME
				884	int "Minimum idle time before sleep"
				885	default 20000000
				886	help
				887	Minimum idle time in nanoseconds before entering low power mode.
				888
				889	config MSM7X00A_IDLE_SPIN_TIME
				890	int "Idle spin time before cpu ramp down"
				891	default 80000
				892	help
				893	Spin time in nanoseconds before ramping down cpu clock and entering
				894	any low power state.
				895
				896	menuconfig MSM_IDLE_STATS
				897	bool "Collect idle statistics"
				898	default y
				899	help
				900	Collect idle statistics and export them in proc/msm_pm_stats.
				901
				902	if MSM_IDLE_STATS
				903
				904	config MSM_IDLE_STATS_FIRST_BUCKET
				905	int "First bucket time"
				906	default 62500
				907	help
				908	Upper time limit in nanoseconds of first bucket.
				909
				910	config MSM_IDLE_STATS_BUCKET_SHIFT
				911	int "Bucket shift"
				912	default 2
				913
				914	config MSM_IDLE_STATS_BUCKET_COUNT
				915	int "Bucket count"
				916	default 10
				917
				918	config MSM_SUSPEND_STATS_FIRST_BUCKET
				919	int "First bucket time for suspend"
				920	default 1000000000
				921	help
				922	Upper time limit in nanoseconds of first bucket of the
				923	histogram. This is for collecting statistics on suspend.
				924
				925	endif # MSM_IDLE_STATS
				926
				927	config CPU_HAS_L2_PMU
				928	bool "L2CC PMU Support"
				929	help
				930	Select this if the L2 cache controller has a Performance Monitoring Unit.
				931
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	932	config HTC_HEADSET
				933	tristate "HTC 2 Wire detection driver"
				934	default n
				935	help
				936	Provides support for detecting HTC 2 wire devices, such as wired
				937	headset, on the trout platform. Can be used with the msm serial
				938	debugger, but not with serial console.
				939
				940	config TROUT_BATTCHG
				941	depends on MACH_TROUT && POWER_SUPPLY
				942	default y
				943	bool "Trout battery / charger driver"
				944
				945	config HTC_PWRSINK
				946	depends on MSM_SMD
				947	default n
				948	bool "HTC Power Sink Driver"
				949
				950	config QSD_SVS
				951	bool "QSD Static Voltage Scaling"
				952	depends on (MACH_QSD8X50_SURF \|\| MACH_QSD8X50_FFA)
				953	default y
				954	select TPS65023
				955	help
				956	Enables static voltage scaling using the TPS65023 PMIC.
				957
				958	config QSD_PMIC_DEFAULT_DCDC1
				959	int "PMIC default output voltage"
				960	depends on (MACH_QSD8X50_SURF \|\| MACH_QSD8X50_FFA)
				961	default 1250
				962	help
				963	This is the PMIC voltage at Linux kernel boot.
				964
				965	config MSM_FIQ_SUPPORT
				966	default y
				967	bool "Enable installation of an FIQ handler."
				968
				969	config MSM_SERIAL_DEBUGGER
				970	select MSM_FIQ_SUPPORT
				971	select KERNEL_DEBUGGER_CORE
				972	default n
				973	bool "FIQ Mode Serial Debugger"
				974	help
				975	The FIQ serial debugger can accept commands even when the
				976	kernel is unresponsive due to being stuck with interrupts
				977	disabled. Depends on the kernel debugger core in drivers/misc.
				978
				979	config MSM_SERIAL_DEBUGGER_CONSOLE
				980	depends on MSM_SERIAL_DEBUGGER
				981	default n
				982	bool "Console on FIQ Serial Debugger port"
				983	help
				984	Enables a console so that printk messages are displayed on
				985	the debugger serial port as the occur.
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	986
Steve Muckle	c8aabae	2010-04-21 16:20:27 -0700	[diff] [blame]	987	config MSM_PROC_COMM
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	988	default y
				989	bool "Proc-Comm RPC Interface"
				990	help
				991	Enables a lightweight communications interface to the
				992	baseband processor.
Steve Muckle	c8aabae	2010-04-21 16:20:27 -0700	[diff] [blame]	993
Brian Swetland	2eb44eb	2008-09-29 16:00:48 -0700	[diff] [blame]	994	config MSM_SMD
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	995	bool "MSM Shared Memory Driver (SMD)"
				996	help
				997	Support for the shared memory interface between the apps
				998	processor and the baseband processor. Provides access to
				999	the "shared heap", as well as virtual serial channels
				1000	used to communicate with various services on the baseband
				1001	processor.
				1002
				1003	choice
				1004	prompt "MSM Shared memory interface version"
				1005	depends on MSM_SMD
				1006	default MSM_SMD_PKG3 if ARCH_MSM_ARM11
				1007	default MSM_SMD_PKG4 if ARCH_MSM_SCORPION
				1008
				1009	config MSM_SMD_PKG3
				1010	bool
				1011	prompt "Package 3"
				1012
				1013	config MSM_SMD_PKG4
				1014	bool
				1015	prompt "Package 4"
				1016	endchoice
				1017
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1018	config MSM_RPC_SDIO_XPRT
				1019	depends on MSM_SDIO_AL
				1020	default y
				1021	bool "MSM SDIO XPRT Layer"
				1022	help
				1023	SDIO Transport Layer for RPC Rouer
				1024
				1025	config MSM_RPC_SDIO_DEBUG
				1026	depends on MSM_RPC_SDIO_XPRT
				1027	default y
				1028	bool "MSM SDIO XPRT debug support"
				1029	help
				1030	Support for debugging SDIO XPRT
				1031
				1032	config MSM_SMD_DEBUG
				1033	depends on MSM_SMD
				1034	default y
				1035	bool "MSM SMD debug support"
				1036	help
				1037	Support for debugging the SMD for communication
				1038	between the ARM9 and ARM11
				1039
				1040	config MSM_SDIO_AL
				1041	depends on ((ARCH_MSM7X30 \|\| MACH_MSM8X60_FUSN_FFA \|\| MACH_TYPE_MSM8X60_FUSION) && HAS_WAKELOCK)
				1042	default y
				1043	tristate "SDIO-Abstraction-Layer"
				1044	help
				1045	Support MSM<->MDM Communication over SDIO bus.
				1046	MDM SDIO-Client should have pipes support.
				1047
				1048	config MSM_SDIO_DMUX
				1049	bool "SDIO Data Mux Driver"
				1050	depends on MSM_SDIO_AL
				1051	default n
				1052	help
				1053	Support Muxed Data Channels over SDIO interface.
				1054
				1055	config MSM_BAM_DMUX
				1056	bool "BAM Data Mux Driver"
				1057	depends on SPS
				1058	default n
				1059	help
				1060	Support Muxed Data Channels over BAM interface.
				1061	BAM has a limited number of pipes. This driver
				1062	provides a means to support more logical channels
				1063	via muxing than BAM could without muxing.
				1064
				1065	config MSM_N_WAY_SMD
Jeff Hugo	0c0f5e9	2011-09-28 13:55:45 -0600	[diff] [blame]	1066	depends on (MSM_SMD && !(ARCH_MSM7X01A))
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1067	default y
				1068	bool "MSM N-WAY SMD support"
				1069	help
				1070	Supports APPS-QDSP SMD communication along with
				1071	normal APPS-MODEM SMD communication.
				1072
				1073	config MSM_N_WAY_SMSM
Jeff Hugo	0c0f5e9	2011-09-28 13:55:45 -0600	[diff] [blame]	1074	depends on (MSM_SMD && !(ARCH_MSM7X01A))
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1075	default y
				1076	bool "MSM N-WAY SMSM support"
				1077	help
				1078	Supports APPS-QDSP SMSM communication along with
				1079	normal APPS-MODEM SMSM communication.
				1080
				1081	config MSM_RESET_MODEM
				1082	tristate "Reset Modem Driver"
				1083	depends on MSM_SMD
				1084	default m
				1085	help
				1086	Allows the user to reset the modem through a device node.
				1087
				1088	config MSM_SMD_LOGGING
				1089	depends on MSM_SMD
				1090	default y
				1091	bool "MSM Shared Memory Logger"
				1092	help
				1093	This option exposes the shared memory logger at /dev/smem_log
				1094	and a debugfs node named smem_log.
				1095
				1096	If in doubt, say yes.
				1097
				1098	config MSM_SMD_NMEA
				1099	bool "NMEA GPS Driver"
				1100	depends on MSM_SMD
				1101	default y
				1102	help
				1103	Enable this to support the NMEA GPS device.
				1104
				1105	If in doubt, say yes.
				1106
				1107	config MSM_SDIO_TTY
				1108	bool "SDIO TTY Driver"
				1109	depends on MSM_SDIO_AL
				1110	default n
				1111	help
				1112	Provides a TTY driver SDIO TTY
				1113	This driver can be used by user space
				1114	applications for passing data through the
				1115	SDIO interface.
				1116
				1117	config MSM_SMD_TTY
				1118	bool "SMD TTY Driver"
				1119	depends on MSM_SMD
				1120	default y
				1121	help
				1122	Provides TTY interfaces to interact with the modem.
				1123
				1124	If in doubt, say yes.
				1125
				1126	config MSM_SMD_QMI
				1127	bool "SMD QMI Driver"
				1128	depends on MSM_SMD
				1129	default y
				1130	help
				1131	Manages network data connections.
				1132
				1133	If in doubt, say yes.
				1134
				1135	config MSM_SMD_PKT
				1136	bool "SMD Packet Driver"
				1137	depends on MSM_SMD
				1138	default y
				1139	help
				1140	Provides a binary SMD non-muxed packet port interface.
				1141
				1142	If in doubt, say yes.
				1143
				1144	config MSM_SDIO_CMUX
				1145	bool "SDIO CMUX Driver"
				1146	depends on MSM_SDIO_AL
				1147	default n
				1148	help
				1149	Provides a Muxed port interface over SDIO QMI
				1150
				1151	config MSM_DSPS
				1152	bool "Sensors DSPS driver"
				1153	depends on (MSM_PIL && (ARCH_MSM8X60 \|\| ARCH_MSM8960))
				1154	default n
				1155	help
				1156	Provides user-space interface to the sensors manager
				1157	to turn on/off the Sensors Processor system clocks.
				1158	It is the DSPS responsibility to turn on/off the sensors
				1159	themself.
				1160	The number of clocks and their name may vary between targets.
				1161	It also triggers the PIL to load the DSPS firmware.
				1162
				1163	config MSM_SDIO_CTL
				1164	bool "SDIO CTL Driver"
				1165	depends on MSM_SDIO_CMUX
				1166	default n
				1167	help
				1168	Provides a binary SDIO control port interface.
				1169
				1170	config MSM_ONCRPCROUTER
				1171	depends on MSM_SMD
				1172	default n
				1173	bool "MSM ONCRPC router support"
				1174	help
				1175	Support for the MSM ONCRPC router for communication between
				1176	the ARM9 and ARM11
				1177
				1178	config MSM_IPC_ROUTER
Karthikeyan Ramasubramanian	da45b43	2011-09-23 14:39:30 -0600	[diff] [blame]	1179	depends on NET
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1180	default n
				1181	bool "MSM IPC Router support"
				1182	help
				1183	Support for the MSM IPC Router for communication between
				1184	the APPs and the MODEM
				1185
Karthikeyan Ramasubramanian	da45b43	2011-09-23 14:39:30 -0600	[diff] [blame]	1186	config MSM_IPC_ROUTER_SMD_XPRT
				1187	depends on MSM_SMD
				1188	depends on MSM_IPC_ROUTER
				1189	default n
				1190	bool "MSM SMD XPRT Layer"
				1191	help
				1192	SMD Transport Layer for IPC Router
				1193
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1194	config MSM_ONCRPCROUTER_DEBUG
				1195	depends on MSM_ONCRPCROUTER
				1196	default y
				1197	bool "MSM debug ONCRPC router support"
				1198	help
				1199	Support for debugging the ONCRPC router for communication
				1200	between the ARM9 and ARM11
				1201
				1202	config MSM_RPC_LOOPBACK_XPRT
				1203	depends on MSM_ONCRPCROUTER
				1204	default n
				1205	bool "MSM RPC local routing support"
				1206	help
				1207	Support for routing RPC messages between APPS clients
				1208	and APPS servers. Helps in testing APPS RPC framework.
				1209
				1210	config MSM_RPCSERVER_TIME_REMOTE
				1211	depends on MSM_ONCRPCROUTER && RTC_HCTOSYS
				1212	default y
				1213	bool "Time remote RPC server"
				1214	help
				1215	The time remote server receives notification of time bases and
				1216	reports these events to registered callback functions.
				1217
				1218	config MSM_RPCSERVER_WATCHDOG
				1219	depends on MSM_ONCRPCROUTER
				1220	default y
				1221	bool "Watchdog RPC server"
				1222	help
				1223	The dog_keepalive server handles watchdog events.
				1224
				1225	config MSM_RPC_WATCHDOG
				1226	depends on MSM_ONCRPCROUTER
				1227	default n
				1228	bool "Watchdog RPC client"
				1229	help
				1230	The dog_keepalive client module.
				1231
				1232	config MSM_RPC_PING
				1233	depends on MSM_ONCRPCROUTER && DEBUG_FS
				1234	default m
				1235	bool "MSM rpc ping"
				1236	help
				1237	Implements MSM rpc ping test module.
				1238
				1239	config MSM_RPC_PROC_COMM_TEST
				1240	depends on DEBUG_FS && MSM_PROC_COMM
				1241	default m
				1242	bool "MSM rpc proc comm test"
				1243	help
				1244	Implements MSM rpc proc comm test module.
				1245
				1246	config MSM_RPC_OEM_RAPI
				1247	depends on MSM_ONCRPCROUTER
				1248	default m
				1249	bool "MSM oem rapi"
				1250	help
				1251	Implements MSM oem rapi client module.
				1252
				1253	config MSM_RPCSERVER_HANDSET
				1254	depends on MSM_ONCRPCROUTER
				1255	default y
				1256	bool "Handset events RPC server"
				1257	help
				1258	Support for receiving handset events like headset detect,
				1259	headset switch and clamshell state.
				1260
				1261	config MSM_RMT_STORAGE_CLIENT
				1262	depends on (ARCH_MSM && MSM_ONCRPCROUTER)
				1263	default n
				1264	bool "Remote Storage RPC client"
				1265	help
				1266	Provide RPC mechanism for remote processors to access storage
				1267	device on apps processor.
				1268
				1269	config MSM_RMT_STORAGE_CLIENT_STATS
				1270	depends on (MSM_RMT_STORAGE_CLIENT && DEBUG_FS)
				1271	default n
				1272	bool "Remote storage RPC client performance statistics"
				1273	help
				1274	Collects performance statistics and shows this information
				1275	through a debugfs file rmt_storage_stats.
				1276
				1277	config MSM_SDIO_SMEM
				1278	depends on MSM_SDIO_AL
				1279	default n
				1280	bool "SDIO SMEM for remote storage"
				1281	help
				1282	Copies data from remote MDM9K memory to local MSM8x60
				1283	memory. Used by remote storage client to shadow
				1284	MDM9K filesystem.
				1285
				1286	config MSM_DALRPC
				1287	bool "DAL RPC support"
				1288	depends on ARCH_MSM_SCORPION \|\| ARCH_MSM_KRAIT
				1289	default y
				1290	help
				1291	Supports RPC calls to DAL devices on remote processor cores.
				1292
				1293	config MSM_DALRPC_TEST
				1294	tristate "DAL RPC test module"
				1295	depends on (MSM_DALRPC && DEBUG_FS)
				1296	default m
				1297	help
				1298	Exercises DAL RPC calls to QDSP6.
				1299
				1300	if CPU_FREQ_MSM
				1301
				1302	config MSM_CPU_FREQ_SET_MIN_MAX
				1303	bool "Set Min/Max CPU frequencies."
				1304	default n
				1305	help
				1306	Allow setting min and max CPU frequencies. Sysfs can be used
				1307	to override these values.
				1308
				1309	config MSM_CPU_FREQ_MAX
				1310	int "Max CPU Frequency"
				1311	depends on MSM_CPU_FREQ_SET_MIN_MAX
				1312	default 384000
				1313
				1314	config MSM_CPU_FREQ_MIN
				1315	int "Min CPU Frequency"
				1316	depends on MSM_CPU_FREQ_SET_MIN_MAX
				1317	default 245760
				1318
				1319	endif # CPU_FREQ_MSM
				1320
				1321	config MSM_CPU_AVS
				1322	bool "Enable software controlled Adaptive Voltage Scaling (AVS)"
				1323	depends on (ARCH_MSM_SCORPION && QSD_SVS)
				1324	depends on ARCH_QSD8X50
				1325	default n
				1326	select MSM_AVS_HW
				1327	help
				1328	This enables the s/w control of Adaptive Voltage Scaling feature
				1329	in Qualcomm ARMv7 CPUs. It adjusts the voltage for each frequency
				1330	based on feedback from three ring oscillators in the CPU.
				1331
				1332	config MSM_AVS_HW
				1333	bool "Enable Adaptive Voltage Scaling (AVS)"
				1334	default n
				1335	help
				1336	Enable AVS hardware to fine tune voltage at each frequency. The
				1337	AVS hardware blocks associated with each Qualcomm ARMv7 cores can
				1338	fine tune the voltages based on the feedback from the ring
				1339	oscillators.
				1340
				1341	config MSM_HW3D
				1342	tristate "MSM Hardware 3D Register Driver"
				1343	depends on ANDROID_PMEM
				1344	default y
				1345	help
				1346	Provides access to registers needed by the userspace OpenGL\|ES
				1347	library.
				1348
				1349	config MSM_ADSP
				1350	depends on (ARCH_MSM7X01A \|\| ARCH_MSM7X25 \|\| ARCH_MSM7X27)
				1351	tristate "MSM ADSP driver"
				1352	depends on ANDROID_PMEM
				1353	default y
				1354	help
				1355	Provides access to registers needed by the userspace aDSP library.
				1356
				1357	config ADSP_RPC_VER
				1358	hex
				1359	default 0x30002 if (ARCH_MSM7X27 \|\| (ARCH_MSM7X25 && AMSS_7X25_VERSION_2009))
				1360	default 0x30001 if (ARCH_MSM7X01A \|\| (ARCH_MSM7X25 && AMSS_7X25_VERSION_2008))
				1361	depends on MSM_ADSP
				1362	help
				1363	Select proper ADSP RPC version
				1364	choice
				1365	prompt "ADSP RPC version"
				1366
				1367	default AMSS_7X25_VERSION_2009
				1368
				1369	config AMSS_7X25_VERSION_2009
				1370	bool "2.0.09"
				1371
				1372	config AMSS_7X25_VERSION_2008
				1373	bool "2.0.08"
				1374	endchoice
				1375
				1376	config MSM7KV2_AUDIO
				1377	bool "MSM7K v2 audio"
				1378	depends on (ARCH_MSM7X30 && ANDROID_PMEM)
				1379	default y
				1380	help
				1381	Enables QDSP5V2-based audio drivers for audio playbacks and
				1382	voice call.
				1383
				1384	config MSM_ADSP_REPORT_EVENTS
				1385	bool "Report modem events from the DSP"
				1386	default y
				1387	depends on (MSM_ADSP \|\| MSM7KV2_AUDIO)
				1388	help
				1389	Normally, only messages from the aDSP are reported to userspace.
				1390	With this option, we report events from the aDSP as well.
				1391
				1392	config MSM_QDSP6
				1393	tristate "QDSP6 support"
				1394	depends on ARCH_QSD8X50 && ANDROID_PMEM
				1395	default y
				1396	help
				1397	Enable support for qdsp6. This provides audio and video functionality.
				1398
				1399	config MSM8X60_AUDIO
				1400	tristate "MSM8X60 audio support"
				1401	depends on ARCH_MSM8X60 && ANDROID_PMEM
				1402	default y
				1403	help
				1404	Enable support for qdsp6v2. This provides audio functionality.
				1405
				1406	config MSM8X60_FTM_AUDIO_DEVICES
				1407	bool "MSM8X60 audio factory test mode support"
				1408	depends on MSM8X60_AUDIO
				1409	help
				1410	Enable support audio factory test mode devices. This is used
				1411	in a production line environment.
				1412
Ben Romberger	45b351c	2011-07-20 22:37:27 -0700	[diff] [blame]	1413	config RTAC
				1414	bool "MSM8K real-time audio calibration support"
				1415	default y
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1416	help
Ben Romberger	45b351c	2011-07-20 22:37:27 -0700	[diff] [blame]	1417	Enable support for rtac. This enables calibration during
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1418	audio operation
				1419
				1420	config MSM7X27A_AUDIO
				1421	bool "MSM7X27A audio support"
				1422	depends on ARCH_MSM7X27A && MSM_ADSP
				1423	default n
				1424	help
				1425	Enable support for 7x27a. This provides audio functionality.
				1426
Justin Paupore	a6cd209	2011-06-22 16:19:45 -0700	[diff] [blame]	1427	config MSM_PROC_COMM_REGULATOR
				1428	bool
				1429	depends on MSM_PROC_COMM && REGULATOR
				1430	help
				1431	Enable regulator framework support for regulators managed by PMLIB
				1432	on the modem, and controlled through proccomm calls.
				1433
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1434	config MSM_VREG_SWITCH_INVERTED
				1435	bool "Reverse vreg switch polarity"
				1436	default n
				1437	help
				1438	Reverses the enable and disable for vreg switch.
				1439
				1440	config MSM_DMA_TEST
				1441	tristate "MSM DMA test module"
				1442	default m
				1443	help
				1444	Intended to be compiled as a module. Provides a device node
				1445	and ioctls for testing the MSM dma system.
				1446
				1447	config WIFI_CONTROL_FUNC
				1448	bool "Enable WiFi control function abstraction"
				1449	help
				1450	Enables Power/Reset/Carddetect function abstraction
				1451
				1452	config WIFI_MEM_PREALLOC
				1453	depends on WIFI_CONTROL_FUNC
				1454	bool "Preallocate memory for WiFi buffers"
				1455	help
				1456	Preallocates memory buffers for WiFi driver
				1457
				1458	config QSD_AUDIO
				1459	bool "QSD audio"
				1460	depends on ARCH_MSM_SCORPION && MSM_DALRPC && ANDROID_PMEM && !MSM_SMP
				1461	default y
				1462	help
				1463	Provides PCM, MP3, and AAC audio playback.
				1464
				1465	config AUDIO_AAC_PLUS
				1466	depends on (MSM_ADSP \|\| QSD_AUDIO \|\| MSM7KV2_AUDIO)
				1467	bool "AAC+ Audio"
				1468	default y
				1469	help
				1470	Provides AAC+ decoding
				1471
				1472	config AUDIO_ENHANCED_AAC_PLUS
				1473	depends on AUDIO_AAC_PLUS
				1474	bool "Enhanced AAC+ Audio"
				1475	default y
				1476	help
				1477	Provides Enhanced AAC+ decoding
				1478
				1479	config SURF_FFA_GPIO_KEYPAD
				1480	bool "MSM SURF/FFA GPIO keypad"
				1481	depends on INPUT_GPIO = "y"
				1482	default y
				1483	help
				1484	Select if the GPIO keypad is attached.
				1485
				1486	config MSM_SLEEP_TIME_OVERRIDE
				1487	bool "Allow overriding suspend/sleep time with PM module parameter"
				1488	default y
				1489	help
				1490	Enable the module parameter sleep_time_override. Specified
				1491	in units of seconds, it overwrites the normal sleep time of
				1492	suspend. The feature is required for automated power management
				1493	testing.
				1494
				1495	config MSM_MEMORY_LOW_POWER_MODE
				1496	bool "Control the low power modes of memory"
				1497	default n
				1498	help
				1499	The application processor controls whether memory should enter
				1500	which low power mode.
				1501
				1502	choice
				1503	prompt "Default Memory Low Power Mode during Idle"
				1504	depends on MSM_MEMORY_LOW_POWER_MODE
				1505	default MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
				1506	help
				1507	Selects the default low power mode of the memory during idle
				1508	sleep.
				1509
				1510	config MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
				1511	bool "Memory active"
				1512
				1513	config MSM_MEMORY_LOW_POWER_MODE_IDLE_RETENTION
				1514	bool "Memory in retention"
				1515
				1516	config MSM_MEMORY_LOW_POWER_MODE_IDLE_DEEP_POWER_DOWN
				1517	bool "Memory in deep power down"
				1518	endchoice
				1519
				1520	choice
				1521	prompt "Default Memory Low Power Mode during Suspend"
				1522	depends on MSM_MEMORY_LOW_POWER_MODE
				1523	default MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
				1524	help
				1525	Selects the default low power mode of the memory during suspend
				1526	sleep.
				1527
				1528	config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
				1529	bool "Memory active"
				1530
				1531	config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_RETENTION
				1532	bool "Memory in retention"
				1533
				1534	config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_DEEP_POWER_DOWN
				1535	bool "Memory in deep power down"
				1536	endchoice
				1537
				1538	choice
				1539	prompt "Power management timeout action"
				1540	default MSM_PM_TIMEOUT_HALT
				1541	help
				1542	Selects the Application Processor's action when Power Management
				1543	times out waiting for Modem's handshake.
				1544
				1545	config MSM_PM_TIMEOUT_HALT
				1546	bool "Halt the Application Processor"
				1547
				1548	config MSM_PM_TIMEOUT_RESET_MODEM
				1549	bool "Reset the Modem Processor"
				1550
				1551	config MSM_PM_TIMEOUT_RESET_CHIP
				1552	bool "Reset the entire chip"
				1553	endchoice
				1554
				1555	config MSM_IDLE_WAIT_ON_MODEM
				1556	int "Wait for Modem to become ready for idle power collapse"
				1557	default 0
				1558	help
				1559	If Modem is not ready to handle Application Processor's request
				1560	for idle power collapse, wait the number of microseconds in case
				1561	Modem becomes ready soon.
				1562
				1563	config MSM_PIL
				1564	bool "Peripheral image loading"
				1565	select FW_LOADER
				1566	depends on (ARCH_MSM8X60 \|\| ARCH_MSM8960)
				1567	default n
				1568	help
				1569	Some peripherals need to be loaded into memory before they can be
				1570	brought out of reset.
				1571
				1572	Say yes to support these devices.
				1573
Stephen Boyd	eb81988	2011-08-29 14:46:30 -0700	[diff] [blame]	1574	config MSM_PIL_QDSP6V4
				1575	tristate "QDSP6v4 (Hexagon) Boot Support"
				1576	depends on MSM_PIL
				1577	help
				1578	Support for booting and shutting down QDSP6v4 processors (hexagon).
				1579	The QDSP6 is a low power DSP used in audio, modem firmware, and modem
				1580	software applications.
				1581
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1582	config MSM_SCM
				1583	bool "Secure Channel Manager (SCM) support"
				1584	default n
				1585
				1586	config MSM_SUBSYSTEM_RESTART
				1587	bool "MSM Subsystem Restart Driver"
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1588	depends on (ARCH_MSM8X60 \|\| ARCH_MSM8960 \|\| ARCH_MSM9615)
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1589	default n
				1590	help
				1591	This option enables the MSM subsystem restart driver, which provides
				1592	a framework to handle subsystem crashes.
				1593
Matt Wagantall	f802090	2011-08-30 21:19:23 -0700	[diff] [blame]	1594	config MSM_SYSMON_COMM
				1595	bool "MSM System Monitor communication support"
				1596	depends on MSM_SMD && MSM_SUBSYSTEM_RESTART
				1597	default y
				1598	help
				1599	This option adds support for MSM System Monitor library, which
				1600	provides an API that may be used for notifying subsystems within
				1601	the SoC about other subsystems' power-up/down state-changes.
				1602
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1603	config MSM_MODEM_8960
				1604	bool "MSM 8960 Modem driver"
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1605	depends on (ARCH_MSM8960 \|\| ARCH_MSM9615)
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1606	help
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1607	This option enables the modem driver for the MSM8960 and MSM9615, which monitors
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1608	modem hardware watchdog interrupt lines and plugs into the subsystem
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1609	restart and PIL drivers. For MSM9615, it only supports a full chip reset.
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1610
Bharath Ramachandramurthy	ff061c7	2011-06-27 14:22:33 -0700	[diff] [blame]	1611	config MSM_LPASS_8960
				1612	tristate "MSM 8960 Lpass driver"
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1613	depends on (ARCH_MSM8960 \|\| ARCH_MSM9615)
Bharath Ramachandramurthy	ff061c7	2011-06-27 14:22:33 -0700	[diff] [blame]	1614	help
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1615	This option enables the lpass driver for the MSM8960 and MSM9615. This monitors
Bharath Ramachandramurthy	ff061c7	2011-06-27 14:22:33 -0700	[diff] [blame]	1616	lpass hardware watchdog interrupt lines and plugs into the subsystem
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1617	restart and PIL drivers. For MSM9615, it only supports a full chip reset.
Bharath Ramachandramurthy	ff061c7	2011-06-27 14:22:33 -0700	[diff] [blame]	1618
Ankur Nandwani	e258cf0	2011-08-19 10:16:38 -0700	[diff] [blame]	1619	config MSM_WCNSS_SSR_8960
				1620	tristate "MSM 8960 WCNSS restart module"
				1621	depends on (ARCH_MSM8960)
				1622	help
				1623	This option enables the WCNSS restart module for MSM8960, which
				1624	monitors WCNSS hardware watchdog interrupt lines and plugs WCNSS
				1625	into the subsystem restart framework.
				1626
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1627	config SCORPION_Uni_45nm_BUG
				1628	bool "Scorpion Uni 45nm(SC45U): Workaround for ICIMVAU and BPIMVA"
				1629	depends on ARCH_MSM7X30 \|\| (ARCH_QSD8X50 && MSM_SOC_REV_A)
				1630	default y
				1631	help
				1632	Invalidating the Instruction Cache by Modified Virtual Address to PoU and
				1633	invalidating the Branch Predictor Array by Modified Virtual Address can
				1634	create invalid entries in the TLB with the wrong ASID values on Scorpion
				1635	Uniprocessor 45nm (SC45U) cores. This option enables the recommended software
				1636	workaround for Scorpion Uniprocessor 45nm cores.
				1637
				1638	This bug is not applicable to any ScorpionMP or Scorpion Uni 65nm(SC65U) cores.
				1639
Harini Jayaraman	ef7805f	2011-09-28 12:45:31 -0600	[diff] [blame]	1640	config MSM_BUSPM_DEV
				1641	tristate "MSM Bus Performance Monitor Kernel Module"
				1642	depends on (ARCH_MSM8X60 \|\| ARCH_MSM8960)
				1643	default m
				1644	help
				1645	This kernel module is used to mmap() hardware registers for the
				1646	performance monitors, counters, etc. The module can also be used to
				1647	allocate physical memory which is used by bus performance hardware to
				1648	dump performance data.
				1649
Mona Hossain	11c03ac	2011-10-26 12:42:10 -0700	[diff] [blame]	1650	config MSM_TZ_LOG
				1651	tristate "MSM Trust Zone (TZ) Log Driver"
				1652	depends on DEBUG_FS
				1653	help
				1654	This option enables a driver with a debugfs interface for messages
				1655	produced by the Secure code (Trust zone). These messages provide
				1656	diagnostic information about TZ operation.
				1657
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1658	config MSM_RPM_LOG
				1659	tristate "MSM Resource Power Manager Log Driver"
				1660	depends on DEBUG_FS
Praveen Chidambaram	7a71223	2011-10-28 13:39:45 -0600	[diff] [blame]	1661	depends on MSM_RPM
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1662	default n
				1663	help
				1664	This option enables a driver which can read from a circular buffer
				1665	of messages produced by the RPM. These messages provide diagnostic
				1666	information about RPM operation. The driver outputs the messages
				1667	via a debugfs node.
				1668
				1669	config MSM_RPM_STATS_LOG
				1670	tristate "MSM Resource Power Manager Stat Driver"
				1671	depends on DEBUG_FS
Praveen Chidambaram	7a71223	2011-10-28 13:39:45 -0600	[diff] [blame]	1672	depends on MSM_RPM
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1673	default n
				1674	help
				1675	This option enables a driver which reads RPM messages from a shared
				1676	memory location. These messages provide statistical information about
				1677	the low power modes that RPM enters. The drivers outputs the message
				1678	via a debugfs node.
				1679
				1680	config MSM_IOMMU
				1681	bool "MSM IOMMU Support"
Joel King	41d594e	2011-10-14 13:18:20 -0700	[diff] [blame]	1682	depends on ARCH_MSM8X60 \|\| ARCH_MSM8960 \|\| ARCH_APQ8064
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1683	select IOMMU_API
				1684	default n
				1685	help
				1686	Support for the IOMMUs found on certain Qualcomm SOCs.
				1687	These IOMMUs allow virtualization of the address space used by most
				1688	cores within the multimedia subsystem.
				1689
				1690	If unsure, say N here.
				1691
				1692	config IOMMU_PGTABLES_L2
				1693	bool "Allow SMMU page tables in the L2 cache (Experimental)"
				1694	depends on MSM_IOMMU=y
				1695	depends on MMU
				1696	depends on CPU_DCACHE_DISABLE=n
				1697	depends on SMP
				1698	default y
				1699	help
				1700	Improves TLB miss latency at the expense of potential L2 pollution.
				1701	However, with large multimedia buffers, the TLB should mostly contain
				1702	section mappings and TLB misses should be quite infrequent.
				1703	Most people can probably say Y here.
				1704
				1705	config MSM_DIRECT_SCLK_ACCESS
				1706	bool "Direct access to the SCLK timer"
				1707	default n
				1708
				1709	config IOMMU_API
				1710	bool
Brian Swetland	2eb44eb	2008-09-29 16:00:48 -0700	[diff] [blame]	1711
Gregory Bean	ab78cde	2010-09-01 16:26:12 -0700	[diff] [blame]	1712	config MSM_GPIOMUX
				1713	bool
				1714
Gregory Bean	1963a2a	2010-08-28 10:05:44 -0700	[diff] [blame]	1715	config MSM_V2_TLMM
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1716	bool
				1717
				1718	config FSM9XXX_TLMM
Gregory Bean	1963a2a	2010-08-28 10:05:44 -0700	[diff] [blame]	1719	bool
Stepan Moskovchenko	0ab84745	2010-11-12 19:29:57 -0800	[diff] [blame]	1720
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1721	config MSM_SECURE_IO
Stepan Moskovchenko	0ab84745	2010-11-12 19:29:57 -0800	[diff] [blame]	1722	bool
Stephen Boyd	2a1eb58	2010-08-27 10:01:23 -0700	[diff] [blame]	1723
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1724	config MSM_NATIVE_RESTART
Stephen Boyd	2a1eb58	2010-08-27 10:01:23 -0700	[diff] [blame]	1725	bool
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1726
				1727	config MSM_BUS_SCALING
				1728	bool "Bus scaling driver"
				1729	default n
				1730
Gagan Mac	85c7049	2011-06-10 16:07:47 -0600	[diff] [blame]	1731	config MSM_BUS_RPM_MULTI_TIER_ENABLED
				1732	bool "RPM Multi-tiering Configuration"
				1733	depends on MSM_BUS_SCALING
				1734
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1735	config MSM_WATCHDOG
				1736	bool "MSM Watchdog Support"
Rohit Vaswani	085a933	2011-09-28 18:57:24 -0700	[diff] [blame]	1737	depends on ARCH_MSM8X60 \|\| ARCH_MSM8960 \|\| ARCH_MSM9615
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1738	help
				1739	This enables the watchdog as is present on 8x60. Currently we use
				1740	core 0's watchdog, and reset the entire SoC if it times out. It does
				1741	not run during the bootup process, so it will not catch any early
				1742	lockups.
				1743
				1744	config MSM_DLOAD_MODE
				1745	bool "Enable download mode on crashes"
Rohit Vaswani	92b071a	2011-10-18 20:10:09 -0700	[diff] [blame]	1746	depends on ARCH_MSM8X60 \|\| ARCH_MSM8960 \|\| ARCH_MSM9615
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1747	default n
				1748	help
				1749	This makes the SoC enter download mode when it resets
				1750	due to a kernel panic. Note that this doesn't by itself
				1751	make the kernel reboot on a kernel panic - that must be
				1752	enabled via another mechanism.
				1753
Pratik Patel	fd6f56a	2011-10-10 17:47:55 -0700	[diff] [blame]	1754	config HAS_QDSS
				1755	bool "QDSS Present"
				1756	help
				1757	Select this if the chip has Qualcomm Debug Subsystem implemented.
				1758
				1759	config MSM_DEBUG_ACROSS_PC
				1760	bool "Debug support across power collapse"
				1761	help
				1762	Enables debug state to be saved and restored across power collapse.
				1763
				1764	config MSM_JTAG_V7
				1765	depends on CPU_V7 && !HAS_QDSS
				1766	default y if DEBUG_KERNEL
				1767	bool "JTAG debug support"
				1768	select MSM_DEBUG_ACROSS_PC
				1769	help
				1770	Add additional support for JTAG kernel debugging.
				1771
Pratik Patel	7831c08	2011-06-08 21:44:37 -0700	[diff] [blame]	1772	config MSM_TRACE_ACROSS_PC
				1773	bool "Trace support across power collapse"
Pratik Patel	7831c08	2011-06-08 21:44:37 -0700	[diff] [blame]	1774	help
				1775	Enables trace state to be saved and restored across power collapse.
				1776
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1777	config MSM_ETM
				1778	tristate "Enable MSM ETM and ETB"
Pratik Patel	fd6f56a	2011-10-10 17:47:55 -0700	[diff] [blame]	1779	depends on ARCH_MSM8X60 && !HAS_QDSS
Pratik Patel	7831c08	2011-06-08 21:44:37 -0700	[diff] [blame]	1780	select MSM_TRACE_ACROSS_PC
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1781	help
Pratik Patel	7831c08	2011-06-08 21:44:37 -0700	[diff] [blame]	1782	Enables embedded trace collection on Qualcomm v7 CPUs.
				1783
				1784	config MSM_QDSS
Pratik Patel	fd6f56a	2011-10-10 17:47:55 -0700	[diff] [blame]	1785	bool "Qualcomm Debug Subsystem"
				1786	depends on HAS_QDSS
				1787	select MSM_DEBUG_ACROSS_PC
Pratik Patel	7831c08	2011-06-08 21:44:37 -0700	[diff] [blame]	1788	select MSM_TRACE_ACROSS_PC
				1789	help
Pratik Patel	fd6f56a	2011-10-10 17:47:55 -0700	[diff] [blame]	1790	Enables support for Qualcomm Debug Subsystem.
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1791
				1792	config MSM_SLEEP_STATS
				1793	bool "Enable exporting of MSM sleep stats to userspace"
				1794	depends on CPU_IDLE
				1795	default n
				1796
				1797	config MSM_STANDALONE_POWER_COLLAPSE
				1798	bool "Enable standalone power collapse"
				1799	default n
				1800
				1801	config MSM_GSBI9_UART
				1802	bool "Enable GSBI9 UART device"
				1803	default n
				1804	help
				1805	This enables GSBI9 configured into UART.
				1806
				1807	config MSM_SHARED_GPIO_FOR_UART2DM
				1808	bool "Use shared GPIOs into UART mode"
				1809	depends on (ARCH_MSM7X27A && !MMC_MSM_SDC3_8_BIT_SUPPORT && !MMC_MSM_SDC4_SUPPORT)
				1810	help
				1811	This option configures GPIO muxed with SDC4/MMC3
				1812	8-bit mode into UART mode. It is used for serial
				1813	console on UART2DM. Say Y if you want to have
				1814	serial console on UART2DM.
				1815
				1816	config MSM_SHOW_RESUME_IRQ
				1817	bool "Enable logging of interrupts that could have caused resume"
Sathish Ambley	d4efc76	2011-10-09 22:19:22 -0700	[diff] [blame]	1818	depends on (ARCH_MSM8X60 \|\| ARCH_MSM8960 \|\| ARCH_MSMCOPPER)
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1819	default n
				1820	help
				1821	This option logs wake up interrupts that have triggered just before
				1822	the resume loop unrolls. Say Y if you want to debug why the system
				1823	resumed.
				1824
				1825	config BT_MSM_PINTEST
				1826	tristate "MSM Bluetooth Pin Connectivity Test"
				1827	depends on ((ARCH_MSM8X60 \|\| ARCH_MSM7X27A) && DEBUG_FS)
				1828	default n
				1829	help
				1830	Bluetooth MSM Pin Connectivity test module.
				1831	This driver provides support for verifying the MSM to BT pin
				1832	connectivity.
				1833
				1834	config MSM_FAKE_BATTERY
				1835	depends on POWER_SUPPLY
				1836	default n
				1837	bool "MSM Fake Battery"
				1838	help
				1839	Enables MSM fake battery driver.
				1840
				1841	config MSM_QDSP6_APR
				1842	bool "Audio QDSP6 APR support"
				1843	depends on MSM_SMD
				1844	default n
				1845	help
				1846	Enable APR IPC protocol support between
				1847	application processor and QDSP6. APR is
				1848	used by audio driver to configure QDSP6's
				1849	ASM, ADM and AFE.
				1850
				1851
				1852	config MSM_AUDIO_QDSP6
				1853	bool "QDSP6 HW Audio support"
				1854	select SND_SOC_MSM_QDSP6_INTF
				1855	default n
				1856	help
				1857	Enable HW audio support in QDSP6.
				1858	QDSP6 can support HW encoder & decoder and audio processing
				1859
Baruch Eruchimovitch	e9cbfc1	2011-10-09 19:47:08 +0200	[diff] [blame]	1860	config MSM_ULTRASOUND
				1861	bool "MSM ultrasound support"
				1862	depends on MSM_AUDIO_QDSP6
				1863	help
				1864	Enable support for qdsp6/ultrasound.
				1865
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1866	config MSM_RPC_VIBRATOR
				1867	bool "RPC based MSM Vibrator Support"
				1868	depends on MSM_ONCRPCROUTER
				1869	help
				1870	Enable the vibrator support on MSM over RPC. The vibrator
				1871	is connected on the PMIC. Say Y if you want to enable this
				1872	feature.
				1873
				1874	config PM8XXX_RPC_VIBRATOR
				1875	bool "RPC based Vibrator on PM8xxx PMICs"
				1876	depends on MSM_RPC_VIBRATOR
				1877	help
				1878	Enable the vibrator support on MSM over RPC. The vibrator
				1879	is connected on the PM8XXX PMIC. Say Y if you want to enable
				1880	this feature.
				1881
				1882	config MSM_SPM_V1
				1883	bool "Driver support for SPM Version 1"
				1884	help
				1885	Enables the support for Version 1 of the SPM driver. SPM hardware is
				1886	used to manage the processor power during sleep. The driver allows
				1887	configuring SPM to allow different power modes.
				1888
				1889	config MSM_SPM_V2
				1890	bool "Driver support for SPM Version 2"
				1891	help
				1892	Enables the support for Version 2 of the SPM driver. SPM hardware is
				1893	used to manage the processor power during sleep. The driver allows
				1894	configuring SPM to allow different power modes.
				1895
				1896	config MSM_L2_SPM
				1897	bool "SPM support for L2 cache"
				1898	depends on MSM_SPM_V2
				1899	help
				1900	Enable SPM driver support for L2 cache. Some MSM chipsets allow
				1901	control of L2 cache low power mode with a Subsystem Power manager.
				1902	Enabling this driver allows configuring L2 SPM for low power modes
				1903	on supported chipsets.
				1904
Laura Abbott	2d1760b	2011-09-29 21:31:24 -0700	[diff] [blame]	1905	config MSM_MULTIMEDIA_USE_ION
				1906	bool "Multimedia suport using Ion"
				1907	depends on ION_MSM
				1908	help
				1909	Enable support for multimedia drivers using Ion for buffer management
				1910	instead of pmem. Selecting this may also involve userspace
				1911	dependencies as well.
				1912
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	1913	endif