| Ian Molton | ec43b81 | 2008-07-15 16:04:22 +0100 | [diff] [blame] | 1 | /* | 
|  | 2 | * Toshiba TMIO NAND flash controller driver | 
|  | 3 | * | 
|  | 4 | * Slightly murky pre-git history of the driver: | 
|  | 5 | * | 
|  | 6 | * Copyright (c) Ian Molton 2004, 2005, 2008 | 
|  | 7 | *    Original work, independant of sharps code. Included hardware ECC support. | 
|  | 8 | *    Hard ECC did not work for writes in the early revisions. | 
|  | 9 | * Copyright (c) Dirk Opfer 2005. | 
|  | 10 | *    Modifications developed from sharps code but | 
|  | 11 | *    NOT containing any, ported onto Ians base. | 
|  | 12 | * Copyright (c) Chris Humbert 2005 | 
|  | 13 | * Copyright (c) Dmitry Baryshkov 2008 | 
|  | 14 | *    Minor fixes | 
|  | 15 | * | 
|  | 16 | * Parts copyright Sebastian Carlier | 
|  | 17 | * | 
|  | 18 | * This file is licensed under | 
|  | 19 | * the terms of the GNU General Public License version 2. This program | 
|  | 20 | * is licensed "as is" without any warranty of any kind, whether express | 
|  | 21 | * or implied. | 
|  | 22 | * | 
|  | 23 | */ | 
|  | 24 |  | 
|  | 25 |  | 
|  | 26 | #include <linux/kernel.h> | 
|  | 27 | #include <linux/module.h> | 
|  | 28 | #include <linux/platform_device.h> | 
|  | 29 | #include <linux/mfd/core.h> | 
|  | 30 | #include <linux/mfd/tmio.h> | 
|  | 31 | #include <linux/delay.h> | 
|  | 32 | #include <linux/io.h> | 
|  | 33 | #include <linux/irq.h> | 
|  | 34 | #include <linux/interrupt.h> | 
|  | 35 | #include <linux/ioport.h> | 
|  | 36 | #include <linux/mtd/mtd.h> | 
|  | 37 | #include <linux/mtd/nand.h> | 
|  | 38 | #include <linux/mtd/nand_ecc.h> | 
|  | 39 | #include <linux/mtd/partitions.h> | 
|  | 40 |  | 
|  | 41 | /*--------------------------------------------------------------------------*/ | 
|  | 42 |  | 
|  | 43 | /* | 
|  | 44 | * NAND Flash Host Controller Configuration Register | 
|  | 45 | */ | 
|  | 46 | #define CCR_COMMAND	0x04	/* w Command				*/ | 
|  | 47 | #define CCR_BASE	0x10	/* l NAND Flash Control Reg Base Addr	*/ | 
|  | 48 | #define CCR_INTP	0x3d	/* b Interrupt Pin			*/ | 
|  | 49 | #define CCR_INTE	0x48	/* b Interrupt Enable			*/ | 
|  | 50 | #define CCR_EC		0x4a	/* b Event Control			*/ | 
|  | 51 | #define CCR_ICC		0x4c	/* b Internal Clock Control		*/ | 
|  | 52 | #define CCR_ECCC	0x5b	/* b ECC Control			*/ | 
|  | 53 | #define CCR_NFTC	0x60	/* b NAND Flash Transaction Control	*/ | 
|  | 54 | #define CCR_NFM		0x61	/* b NAND Flash Monitor			*/ | 
|  | 55 | #define CCR_NFPSC	0x62	/* b NAND Flash Power Supply Control	*/ | 
|  | 56 | #define CCR_NFDC	0x63	/* b NAND Flash Detect Control		*/ | 
|  | 57 |  | 
|  | 58 | /* | 
|  | 59 | * NAND Flash Control Register | 
|  | 60 | */ | 
|  | 61 | #define FCR_DATA	0x00	/* bwl Data Register			*/ | 
|  | 62 | #define FCR_MODE	0x04	/* b Mode Register			*/ | 
|  | 63 | #define FCR_STATUS	0x05	/* b Status Register			*/ | 
|  | 64 | #define FCR_ISR		0x06	/* b Interrupt Status Register		*/ | 
|  | 65 | #define FCR_IMR		0x07	/* b Interrupt Mask Register		*/ | 
|  | 66 |  | 
|  | 67 | /* FCR_MODE Register Command List */ | 
|  | 68 | #define FCR_MODE_DATA	0x94	/* Data Data_Mode */ | 
|  | 69 | #define FCR_MODE_COMMAND 0x95	/* Data Command_Mode */ | 
|  | 70 | #define FCR_MODE_ADDRESS 0x96	/* Data Address_Mode */ | 
|  | 71 |  | 
|  | 72 | #define FCR_MODE_HWECC_CALC	0xB4	/* HW-ECC Data */ | 
|  | 73 | #define FCR_MODE_HWECC_RESULT	0xD4	/* HW-ECC Calc result Read_Mode */ | 
|  | 74 | #define FCR_MODE_HWECC_RESET	0xF4	/* HW-ECC Reset */ | 
|  | 75 |  | 
|  | 76 | #define FCR_MODE_POWER_ON	0x0C	/* Power Supply ON  to SSFDC card */ | 
|  | 77 | #define FCR_MODE_POWER_OFF	0x08	/* Power Supply OFF to SSFDC card */ | 
|  | 78 |  | 
|  | 79 | #define FCR_MODE_LED_OFF	0x00	/* LED OFF */ | 
|  | 80 | #define FCR_MODE_LED_ON		0x04	/* LED ON */ | 
|  | 81 |  | 
|  | 82 | #define FCR_MODE_EJECT_ON	0x68	/* Ejection events active  */ | 
|  | 83 | #define FCR_MODE_EJECT_OFF	0x08	/* Ejection events ignored */ | 
|  | 84 |  | 
|  | 85 | #define FCR_MODE_LOCK		0x6C	/* Lock_Mode. Eject Switch Invalid */ | 
|  | 86 | #define FCR_MODE_UNLOCK		0x0C	/* UnLock_Mode. Eject Switch is valid */ | 
|  | 87 |  | 
|  | 88 | #define FCR_MODE_CONTROLLER_ID	0x40	/* Controller ID Read */ | 
|  | 89 | #define FCR_MODE_STANDBY	0x00	/* SSFDC card Changes Standby State */ | 
|  | 90 |  | 
|  | 91 | #define FCR_MODE_WE		0x80 | 
|  | 92 | #define FCR_MODE_ECC1		0x40 | 
|  | 93 | #define FCR_MODE_ECC0		0x20 | 
|  | 94 | #define FCR_MODE_CE		0x10 | 
|  | 95 | #define FCR_MODE_PCNT1		0x08 | 
|  | 96 | #define FCR_MODE_PCNT0		0x04 | 
|  | 97 | #define FCR_MODE_ALE		0x02 | 
|  | 98 | #define FCR_MODE_CLE		0x01 | 
|  | 99 |  | 
|  | 100 | #define FCR_STATUS_BUSY		0x80 | 
|  | 101 |  | 
|  | 102 | /*--------------------------------------------------------------------------*/ | 
|  | 103 |  | 
|  | 104 | struct tmio_nand { | 
|  | 105 | struct mtd_info mtd; | 
|  | 106 | struct nand_chip chip; | 
|  | 107 |  | 
|  | 108 | struct platform_device *dev; | 
|  | 109 |  | 
|  | 110 | void __iomem *ccr; | 
|  | 111 | void __iomem *fcr; | 
| Dmitry Baryshkov | 076c7f4 | 2008-09-04 13:28:33 +0400 | [diff] [blame] | 112 | unsigned long fcr_base; | 
| Ian Molton | ec43b81 | 2008-07-15 16:04:22 +0100 | [diff] [blame] | 113 |  | 
|  | 114 | unsigned int irq; | 
|  | 115 |  | 
|  | 116 | /* for tmio_nand_read_byte */ | 
|  | 117 | u8			read; | 
|  | 118 | unsigned read_good:1; | 
|  | 119 | }; | 
|  | 120 |  | 
|  | 121 | #define mtd_to_tmio(m)			container_of(m, struct tmio_nand, mtd) | 
|  | 122 |  | 
|  | 123 | #ifdef CONFIG_MTD_CMDLINE_PARTS | 
|  | 124 | static const char *part_probes[] = { "cmdlinepart", NULL }; | 
|  | 125 | #endif | 
|  | 126 |  | 
|  | 127 | /*--------------------------------------------------------------------------*/ | 
|  | 128 |  | 
|  | 129 | static void tmio_nand_hwcontrol(struct mtd_info *mtd, int cmd, | 
|  | 130 | unsigned int ctrl) | 
|  | 131 | { | 
|  | 132 | struct tmio_nand *tmio = mtd_to_tmio(mtd); | 
|  | 133 | struct nand_chip *chip = mtd->priv; | 
|  | 134 |  | 
|  | 135 | if (ctrl & NAND_CTRL_CHANGE) { | 
|  | 136 | u8 mode; | 
|  | 137 |  | 
|  | 138 | if (ctrl & NAND_NCE) { | 
|  | 139 | mode = FCR_MODE_DATA; | 
|  | 140 |  | 
|  | 141 | if (ctrl & NAND_CLE) | 
|  | 142 | mode |=  FCR_MODE_CLE; | 
|  | 143 | else | 
|  | 144 | mode &= ~FCR_MODE_CLE; | 
|  | 145 |  | 
|  | 146 | if (ctrl & NAND_ALE) | 
|  | 147 | mode |=  FCR_MODE_ALE; | 
|  | 148 | else | 
|  | 149 | mode &= ~FCR_MODE_ALE; | 
|  | 150 | } else { | 
|  | 151 | mode = FCR_MODE_STANDBY; | 
|  | 152 | } | 
|  | 153 |  | 
|  | 154 | tmio_iowrite8(mode, tmio->fcr + FCR_MODE); | 
|  | 155 | tmio->read_good = 0; | 
|  | 156 | } | 
|  | 157 |  | 
|  | 158 | if (cmd != NAND_CMD_NONE) | 
|  | 159 | tmio_iowrite8(cmd, chip->IO_ADDR_W); | 
|  | 160 | } | 
|  | 161 |  | 
|  | 162 | static int tmio_nand_dev_ready(struct mtd_info *mtd) | 
|  | 163 | { | 
|  | 164 | struct tmio_nand *tmio = mtd_to_tmio(mtd); | 
|  | 165 |  | 
|  | 166 | return !(tmio_ioread8(tmio->fcr + FCR_STATUS) & FCR_STATUS_BUSY); | 
|  | 167 | } | 
|  | 168 |  | 
|  | 169 | static irqreturn_t tmio_irq(int irq, void *__tmio) | 
|  | 170 | { | 
|  | 171 | struct tmio_nand *tmio = __tmio; | 
|  | 172 | struct nand_chip *nand_chip = &tmio->chip; | 
|  | 173 |  | 
|  | 174 | /* disable RDYREQ interrupt */ | 
|  | 175 | tmio_iowrite8(0x00, tmio->fcr + FCR_IMR); | 
|  | 176 |  | 
|  | 177 | if (unlikely(!waitqueue_active(&nand_chip->controller->wq))) | 
|  | 178 | dev_warn(&tmio->dev->dev, "spurious interrupt\n"); | 
|  | 179 |  | 
|  | 180 | wake_up(&nand_chip->controller->wq); | 
|  | 181 | return IRQ_HANDLED; | 
|  | 182 | } | 
|  | 183 |  | 
|  | 184 | /* | 
|  | 185 | *The TMIO core has a RDYREQ interrupt on the posedge of #SMRB. | 
|  | 186 | *This interrupt is normally disabled, but for long operations like | 
|  | 187 | *erase and write, we enable it to wake us up.  The irq handler | 
|  | 188 | *disables the interrupt. | 
|  | 189 | */ | 
|  | 190 | static int | 
|  | 191 | tmio_nand_wait(struct mtd_info *mtd, struct nand_chip *nand_chip) | 
|  | 192 | { | 
|  | 193 | struct tmio_nand *tmio = mtd_to_tmio(mtd); | 
|  | 194 | long timeout; | 
|  | 195 |  | 
|  | 196 | /* enable RDYREQ interrupt */ | 
|  | 197 | tmio_iowrite8(0x0f, tmio->fcr + FCR_ISR); | 
|  | 198 | tmio_iowrite8(0x81, tmio->fcr + FCR_IMR); | 
|  | 199 |  | 
|  | 200 | timeout = wait_event_timeout(nand_chip->controller->wq, | 
|  | 201 | tmio_nand_dev_ready(mtd), | 
|  | 202 | msecs_to_jiffies(nand_chip->state == FL_ERASING ? 400 : 20)); | 
|  | 203 |  | 
|  | 204 | if (unlikely(!tmio_nand_dev_ready(mtd))) { | 
|  | 205 | tmio_iowrite8(0x00, tmio->fcr + FCR_IMR); | 
|  | 206 | dev_warn(&tmio->dev->dev, "still busy with %s after %d ms\n", | 
|  | 207 | nand_chip->state == FL_ERASING ? "erase" : "program", | 
|  | 208 | nand_chip->state == FL_ERASING ? 400 : 20); | 
|  | 209 |  | 
|  | 210 | } else if (unlikely(!timeout)) { | 
|  | 211 | tmio_iowrite8(0x00, tmio->fcr + FCR_IMR); | 
|  | 212 | dev_warn(&tmio->dev->dev, "timeout waiting for interrupt\n"); | 
|  | 213 | } | 
|  | 214 |  | 
|  | 215 | nand_chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); | 
|  | 216 | return nand_chip->read_byte(mtd); | 
|  | 217 | } | 
|  | 218 |  | 
|  | 219 | /* | 
|  | 220 | *The TMIO controller combines two 8-bit data bytes into one 16-bit | 
|  | 221 | *word. This function separates them so nand_base.c works as expected, | 
|  | 222 | *especially its NAND_CMD_READID routines. | 
|  | 223 | * | 
|  | 224 | *To prevent stale data from being read, tmio_nand_hwcontrol() clears | 
|  | 225 | *tmio->read_good. | 
|  | 226 | */ | 
|  | 227 | static u_char tmio_nand_read_byte(struct mtd_info *mtd) | 
|  | 228 | { | 
|  | 229 | struct tmio_nand *tmio = mtd_to_tmio(mtd); | 
|  | 230 | unsigned int data; | 
|  | 231 |  | 
|  | 232 | if (tmio->read_good--) | 
|  | 233 | return tmio->read; | 
|  | 234 |  | 
|  | 235 | data = tmio_ioread16(tmio->fcr + FCR_DATA); | 
|  | 236 | tmio->read = data >> 8; | 
|  | 237 | return data; | 
|  | 238 | } | 
|  | 239 |  | 
|  | 240 | /* | 
|  | 241 | *The TMIO controller converts an 8-bit NAND interface to a 16-bit | 
|  | 242 | *bus interface, so all data reads and writes must be 16-bit wide. | 
|  | 243 | *Thus, we implement 16-bit versions of the read, write, and verify | 
|  | 244 | *buffer functions. | 
|  | 245 | */ | 
|  | 246 | static void | 
|  | 247 | tmio_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) | 
|  | 248 | { | 
|  | 249 | struct tmio_nand *tmio = mtd_to_tmio(mtd); | 
|  | 250 |  | 
|  | 251 | tmio_iowrite16_rep(tmio->fcr + FCR_DATA, buf, len >> 1); | 
|  | 252 | } | 
|  | 253 |  | 
|  | 254 | static void tmio_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) | 
|  | 255 | { | 
|  | 256 | struct tmio_nand *tmio = mtd_to_tmio(mtd); | 
|  | 257 |  | 
|  | 258 | tmio_ioread16_rep(tmio->fcr + FCR_DATA, buf, len >> 1); | 
|  | 259 | } | 
|  | 260 |  | 
|  | 261 | static int | 
|  | 262 | tmio_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) | 
|  | 263 | { | 
|  | 264 | struct tmio_nand *tmio = mtd_to_tmio(mtd); | 
|  | 265 | u16				*p = (u16 *) buf; | 
|  | 266 |  | 
|  | 267 | for (len >>= 1; len; len--) | 
|  | 268 | if (*(p++) != tmio_ioread16(tmio->fcr + FCR_DATA)) | 
|  | 269 | return -EFAULT; | 
|  | 270 | return 0; | 
|  | 271 | } | 
|  | 272 |  | 
|  | 273 | static void tmio_nand_enable_hwecc(struct mtd_info *mtd, int mode) | 
|  | 274 | { | 
|  | 275 | struct tmio_nand *tmio = mtd_to_tmio(mtd); | 
|  | 276 |  | 
|  | 277 | tmio_iowrite8(FCR_MODE_HWECC_RESET, tmio->fcr + FCR_MODE); | 
|  | 278 | tmio_ioread8(tmio->fcr + FCR_DATA);	/* dummy read */ | 
|  | 279 | tmio_iowrite8(FCR_MODE_HWECC_CALC, tmio->fcr + FCR_MODE); | 
|  | 280 | } | 
|  | 281 |  | 
|  | 282 | static int tmio_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, | 
|  | 283 | u_char *ecc_code) | 
|  | 284 | { | 
|  | 285 | struct tmio_nand *tmio = mtd_to_tmio(mtd); | 
|  | 286 | unsigned int ecc; | 
|  | 287 |  | 
|  | 288 | tmio_iowrite8(FCR_MODE_HWECC_RESULT, tmio->fcr + FCR_MODE); | 
|  | 289 |  | 
|  | 290 | ecc = tmio_ioread16(tmio->fcr + FCR_DATA); | 
|  | 291 | ecc_code[1] = ecc;	/* 000-255 LP7-0 */ | 
|  | 292 | ecc_code[0] = ecc >> 8;	/* 000-255 LP15-8 */ | 
|  | 293 | ecc = tmio_ioread16(tmio->fcr + FCR_DATA); | 
|  | 294 | ecc_code[2] = ecc;	/* 000-255 CP5-0,11b */ | 
|  | 295 | ecc_code[4] = ecc >> 8;	/* 256-511 LP7-0 */ | 
|  | 296 | ecc = tmio_ioread16(tmio->fcr + FCR_DATA); | 
|  | 297 | ecc_code[3] = ecc;	/* 256-511 LP15-8 */ | 
|  | 298 | ecc_code[5] = ecc >> 8;	/* 256-511 CP5-0,11b */ | 
|  | 299 |  | 
|  | 300 | tmio_iowrite8(FCR_MODE_DATA, tmio->fcr + FCR_MODE); | 
|  | 301 | return 0; | 
|  | 302 | } | 
|  | 303 |  | 
|  | 304 | static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio) | 
|  | 305 | { | 
|  | 306 | struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; | 
|  | 307 | int ret; | 
|  | 308 |  | 
|  | 309 | if (cell->enable) { | 
|  | 310 | ret = cell->enable(dev); | 
|  | 311 | if (ret) | 
|  | 312 | return ret; | 
|  | 313 | } | 
|  | 314 |  | 
|  | 315 | /* (4Ch) CLKRUN Enable    1st spcrunc */ | 
|  | 316 | tmio_iowrite8(0x81, tmio->ccr + CCR_ICC); | 
|  | 317 |  | 
|  | 318 | /* (10h)BaseAddress    0x1000 spba.spba2 */ | 
| Dmitry Baryshkov | 076c7f4 | 2008-09-04 13:28:33 +0400 | [diff] [blame] | 319 | tmio_iowrite16(tmio->fcr_base, tmio->ccr + CCR_BASE); | 
|  | 320 | tmio_iowrite16(tmio->fcr_base >> 16, tmio->ccr + CCR_BASE + 2); | 
| Ian Molton | ec43b81 | 2008-07-15 16:04:22 +0100 | [diff] [blame] | 321 |  | 
|  | 322 | /* (04h)Command Register I/O spcmd */ | 
|  | 323 | tmio_iowrite8(0x02, tmio->ccr + CCR_COMMAND); | 
|  | 324 |  | 
|  | 325 | /* (62h) Power Supply Control ssmpwc */ | 
|  | 326 | /* HardPowerOFF - SuspendOFF - PowerSupplyWait_4MS */ | 
|  | 327 | tmio_iowrite8(0x02, tmio->ccr + CCR_NFPSC); | 
|  | 328 |  | 
|  | 329 | /* (63h) Detect Control ssmdtc */ | 
|  | 330 | tmio_iowrite8(0x02, tmio->ccr + CCR_NFDC); | 
|  | 331 |  | 
|  | 332 | /* Interrupt status register clear sintst */ | 
|  | 333 | tmio_iowrite8(0x0f, tmio->fcr + FCR_ISR); | 
|  | 334 |  | 
|  | 335 | /* After power supply, Media are reset smode */ | 
|  | 336 | tmio_iowrite8(FCR_MODE_POWER_ON, tmio->fcr + FCR_MODE); | 
|  | 337 | tmio_iowrite8(FCR_MODE_COMMAND, tmio->fcr + FCR_MODE); | 
|  | 338 | tmio_iowrite8(NAND_CMD_RESET, tmio->fcr + FCR_DATA); | 
|  | 339 |  | 
|  | 340 | /* Standby Mode smode */ | 
|  | 341 | tmio_iowrite8(FCR_MODE_STANDBY, tmio->fcr + FCR_MODE); | 
|  | 342 |  | 
|  | 343 | mdelay(5); | 
|  | 344 |  | 
|  | 345 | return 0; | 
|  | 346 | } | 
|  | 347 |  | 
|  | 348 | static void tmio_hw_stop(struct platform_device *dev, struct tmio_nand *tmio) | 
|  | 349 | { | 
|  | 350 | struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; | 
|  | 351 |  | 
|  | 352 | tmio_iowrite8(FCR_MODE_POWER_OFF, tmio->fcr + FCR_MODE); | 
|  | 353 | if (cell->disable) | 
|  | 354 | cell->disable(dev); | 
|  | 355 | } | 
|  | 356 |  | 
|  | 357 | static int tmio_probe(struct platform_device *dev) | 
|  | 358 | { | 
|  | 359 | struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; | 
|  | 360 | struct tmio_nand_data *data = cell->driver_data; | 
|  | 361 | struct resource *fcr = platform_get_resource(dev, | 
|  | 362 | IORESOURCE_MEM, 0); | 
|  | 363 | struct resource *ccr = platform_get_resource(dev, | 
|  | 364 | IORESOURCE_MEM, 1); | 
|  | 365 | int irq = platform_get_irq(dev, 0); | 
|  | 366 | struct tmio_nand *tmio; | 
|  | 367 | struct mtd_info *mtd; | 
|  | 368 | struct nand_chip *nand_chip; | 
|  | 369 | #ifdef CONFIG_MTD_PARTITIONS | 
|  | 370 | struct mtd_partition *parts; | 
|  | 371 | int nbparts = 0; | 
|  | 372 | #endif | 
|  | 373 | int retval; | 
|  | 374 |  | 
|  | 375 | if (data == NULL) | 
|  | 376 | dev_warn(&dev->dev, "NULL platform data!\n"); | 
|  | 377 |  | 
|  | 378 | tmio = kzalloc(sizeof *tmio, GFP_KERNEL); | 
|  | 379 | if (!tmio) { | 
|  | 380 | retval = -ENOMEM; | 
|  | 381 | goto err_kzalloc; | 
|  | 382 | } | 
|  | 383 |  | 
|  | 384 | tmio->dev = dev; | 
|  | 385 |  | 
|  | 386 | platform_set_drvdata(dev, tmio); | 
|  | 387 | mtd = &tmio->mtd; | 
|  | 388 | nand_chip = &tmio->chip; | 
|  | 389 | mtd->priv = nand_chip; | 
|  | 390 | mtd->name = "tmio-nand"; | 
|  | 391 |  | 
|  | 392 | tmio->ccr = ioremap(ccr->start, ccr->end - ccr->start + 1); | 
|  | 393 | if (!tmio->ccr) { | 
|  | 394 | retval = -EIO; | 
|  | 395 | goto err_iomap_ccr; | 
|  | 396 | } | 
|  | 397 |  | 
| Dmitry Baryshkov | 076c7f4 | 2008-09-04 13:28:33 +0400 | [diff] [blame] | 398 | tmio->fcr_base = fcr->start & 0xfffff; | 
| Ian Molton | ec43b81 | 2008-07-15 16:04:22 +0100 | [diff] [blame] | 399 | tmio->fcr = ioremap(fcr->start, fcr->end - fcr->start + 1); | 
|  | 400 | if (!tmio->fcr) { | 
|  | 401 | retval = -EIO; | 
|  | 402 | goto err_iomap_fcr; | 
|  | 403 | } | 
|  | 404 |  | 
|  | 405 | retval = tmio_hw_init(dev, tmio); | 
|  | 406 | if (retval) | 
|  | 407 | goto err_hwinit; | 
|  | 408 |  | 
|  | 409 | /* Set address of NAND IO lines */ | 
|  | 410 | nand_chip->IO_ADDR_R = tmio->fcr; | 
|  | 411 | nand_chip->IO_ADDR_W = tmio->fcr; | 
|  | 412 |  | 
|  | 413 | /* Set address of hardware control function */ | 
|  | 414 | nand_chip->cmd_ctrl = tmio_nand_hwcontrol; | 
|  | 415 | nand_chip->dev_ready = tmio_nand_dev_ready; | 
|  | 416 | nand_chip->read_byte = tmio_nand_read_byte; | 
|  | 417 | nand_chip->write_buf = tmio_nand_write_buf; | 
|  | 418 | nand_chip->read_buf = tmio_nand_read_buf; | 
|  | 419 | nand_chip->verify_buf = tmio_nand_verify_buf; | 
|  | 420 |  | 
|  | 421 | /* set eccmode using hardware ECC */ | 
|  | 422 | nand_chip->ecc.mode = NAND_ECC_HW; | 
|  | 423 | nand_chip->ecc.size = 512; | 
|  | 424 | nand_chip->ecc.bytes = 6; | 
|  | 425 | nand_chip->ecc.hwctl = tmio_nand_enable_hwecc; | 
|  | 426 | nand_chip->ecc.calculate = tmio_nand_calculate_ecc; | 
|  | 427 | nand_chip->ecc.correct = nand_correct_data; | 
|  | 428 |  | 
|  | 429 | if (data) | 
|  | 430 | nand_chip->badblock_pattern = data->badblock_pattern; | 
|  | 431 |  | 
|  | 432 | /* 15 us command delay time */ | 
|  | 433 | nand_chip->chip_delay = 15; | 
|  | 434 |  | 
|  | 435 | retval = request_irq(irq, &tmio_irq, | 
| Kay Sievers | 475b44c | 2009-01-06 10:44:38 -0800 | [diff] [blame] | 436 | IRQF_DISABLED, dev_name(&dev->dev), tmio); | 
| Ian Molton | ec43b81 | 2008-07-15 16:04:22 +0100 | [diff] [blame] | 437 | if (retval) { | 
|  | 438 | dev_err(&dev->dev, "request_irq error %d\n", retval); | 
|  | 439 | goto err_irq; | 
|  | 440 | } | 
|  | 441 |  | 
|  | 442 | tmio->irq = irq; | 
|  | 443 | nand_chip->waitfunc = tmio_nand_wait; | 
|  | 444 |  | 
|  | 445 | /* Scan to find existence of the device */ | 
|  | 446 | if (nand_scan(mtd, 1)) { | 
|  | 447 | retval = -ENODEV; | 
|  | 448 | goto err_scan; | 
|  | 449 | } | 
|  | 450 | /* Register the partitions */ | 
|  | 451 | #ifdef CONFIG_MTD_PARTITIONS | 
|  | 452 | #ifdef CONFIG_MTD_CMDLINE_PARTS | 
|  | 453 | nbparts = parse_mtd_partitions(mtd, part_probes, &parts, 0); | 
|  | 454 | #endif | 
|  | 455 | if (nbparts <= 0 && data) { | 
|  | 456 | parts = data->partition; | 
|  | 457 | nbparts = data->num_partitions; | 
|  | 458 | } | 
|  | 459 |  | 
|  | 460 | if (nbparts) | 
|  | 461 | retval = add_mtd_partitions(mtd, parts, nbparts); | 
|  | 462 | else | 
|  | 463 | #endif | 
|  | 464 | retval = add_mtd_device(mtd); | 
|  | 465 |  | 
|  | 466 | if (!retval) | 
|  | 467 | return retval; | 
|  | 468 |  | 
|  | 469 | nand_release(mtd); | 
|  | 470 |  | 
|  | 471 | err_scan: | 
|  | 472 | if (tmio->irq) | 
|  | 473 | free_irq(tmio->irq, tmio); | 
|  | 474 | err_irq: | 
|  | 475 | tmio_hw_stop(dev, tmio); | 
|  | 476 | err_hwinit: | 
|  | 477 | iounmap(tmio->fcr); | 
|  | 478 | err_iomap_fcr: | 
|  | 479 | iounmap(tmio->ccr); | 
|  | 480 | err_iomap_ccr: | 
|  | 481 | kfree(tmio); | 
|  | 482 | err_kzalloc: | 
|  | 483 | return retval; | 
|  | 484 | } | 
|  | 485 |  | 
|  | 486 | static int tmio_remove(struct platform_device *dev) | 
|  | 487 | { | 
|  | 488 | struct tmio_nand *tmio = platform_get_drvdata(dev); | 
|  | 489 |  | 
|  | 490 | nand_release(&tmio->mtd); | 
|  | 491 | if (tmio->irq) | 
|  | 492 | free_irq(tmio->irq, tmio); | 
|  | 493 | tmio_hw_stop(dev, tmio); | 
|  | 494 | iounmap(tmio->fcr); | 
|  | 495 | iounmap(tmio->ccr); | 
|  | 496 | kfree(tmio); | 
|  | 497 | return 0; | 
|  | 498 | } | 
|  | 499 |  | 
|  | 500 | #ifdef CONFIG_PM | 
|  | 501 | static int tmio_suspend(struct platform_device *dev, pm_message_t state) | 
|  | 502 | { | 
|  | 503 | struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; | 
|  | 504 |  | 
|  | 505 | if (cell->suspend) | 
|  | 506 | cell->suspend(dev); | 
|  | 507 |  | 
|  | 508 | tmio_hw_stop(dev, platform_get_drvdata(dev)); | 
|  | 509 | return 0; | 
|  | 510 | } | 
|  | 511 |  | 
|  | 512 | static int tmio_resume(struct platform_device *dev) | 
|  | 513 | { | 
|  | 514 | struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; | 
|  | 515 |  | 
|  | 516 | /* FIXME - is this required or merely another attack of the broken | 
|  | 517 | * SHARP platform? Looks suspicious. | 
|  | 518 | */ | 
|  | 519 | tmio_hw_init(dev, platform_get_drvdata(dev)); | 
|  | 520 |  | 
|  | 521 | if (cell->resume) | 
|  | 522 | cell->resume(dev); | 
|  | 523 |  | 
|  | 524 | return 0; | 
|  | 525 | } | 
|  | 526 | #else | 
|  | 527 | #define tmio_suspend NULL | 
|  | 528 | #define tmio_resume NULL | 
|  | 529 | #endif | 
|  | 530 |  | 
|  | 531 | static struct platform_driver tmio_driver = { | 
|  | 532 | .driver.name	= "tmio-nand", | 
|  | 533 | .driver.owner	= THIS_MODULE, | 
|  | 534 | .probe		= tmio_probe, | 
|  | 535 | .remove		= tmio_remove, | 
|  | 536 | .suspend	= tmio_suspend, | 
|  | 537 | .resume		= tmio_resume, | 
|  | 538 | }; | 
|  | 539 |  | 
|  | 540 | static int __init tmio_init(void) | 
|  | 541 | { | 
|  | 542 | return platform_driver_register(&tmio_driver); | 
|  | 543 | } | 
|  | 544 |  | 
|  | 545 | static void __exit tmio_exit(void) | 
|  | 546 | { | 
|  | 547 | platform_driver_unregister(&tmio_driver); | 
|  | 548 | } | 
|  | 549 |  | 
|  | 550 | module_init(tmio_init); | 
|  | 551 | module_exit(tmio_exit); | 
|  | 552 |  | 
|  | 553 | MODULE_LICENSE("GPL v2"); | 
|  | 554 | MODULE_AUTHOR("Ian Molton, Dirk Opfer, Chris Humbert, Dmitry Baryshkov"); | 
|  | 555 | MODULE_DESCRIPTION("NAND flash driver on Toshiba Mobile IO controller"); | 
|  | 556 | MODULE_ALIAS("platform:tmio-nand"); |