| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* | 
 | 2 |  *  linux/drivers/ide/ide-disk.c	Version 1.18	Mar 05, 2003 | 
 | 3 |  * | 
 | 4 |  *  Copyright (C) 1994-1998  Linus Torvalds & authors (see below) | 
 | 5 |  *  Copyright (C) 1998-2002  Linux ATA Development | 
 | 6 |  *				Andre Hedrick <andre@linux-ide.org> | 
 | 7 |  *  Copyright (C) 2003	     Red Hat <alan@redhat.com> | 
 | 8 |  */ | 
 | 9 |  | 
 | 10 | /* | 
 | 11 |  *  Mostly written by Mark Lord <mlord@pobox.com> | 
 | 12 |  *                and Gadi Oxman <gadio@netvision.net.il> | 
 | 13 |  *                and Andre Hedrick <andre@linux-ide.org> | 
 | 14 |  * | 
 | 15 |  * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c. | 
 | 16 |  * | 
 | 17 |  * Version 1.00		move disk only code from ide.c to ide-disk.c | 
 | 18 |  *			support optional byte-swapping of all data | 
 | 19 |  * Version 1.01		fix previous byte-swapping code | 
 | 20 |  * Version 1.02		remove ", LBA" from drive identification msgs | 
 | 21 |  * Version 1.03		fix display of id->buf_size for big-endian | 
 | 22 |  * Version 1.04		add /proc configurable settings and S.M.A.R.T support | 
 | 23 |  * Version 1.05		add capacity support for ATA3 >= 8GB | 
 | 24 |  * Version 1.06		get boot-up messages to show full cyl count | 
 | 25 |  * Version 1.07		disable door-locking if it fails | 
 | 26 |  * Version 1.08		fixed CHS/LBA translations for ATA4 > 8GB, | 
 | 27 |  *			process of adding new ATA4 compliance. | 
 | 28 |  *			fixed problems in allowing fdisk to see | 
 | 29 |  *			the entire disk. | 
 | 30 |  * Version 1.09		added increment of rq->sector in ide_multwrite | 
 | 31 |  *			added UDMA 3/4 reporting | 
 | 32 |  * Version 1.10		request queue changes, Ultra DMA 100 | 
 | 33 |  * Version 1.11		added 48-bit lba | 
 | 34 |  * Version 1.12		adding taskfile io access method | 
 | 35 |  * Version 1.13		added standby and flush-cache for notifier | 
 | 36 |  * Version 1.14		added acoustic-wcache | 
 | 37 |  * Version 1.15		convert all calls to ide_raw_taskfile | 
 | 38 |  *				since args will return register content. | 
 | 39 |  * Version 1.16		added suspend-resume-checkpower | 
 | 40 |  * Version 1.17		do flush on standy, do flush on ATA < ATA6 | 
 | 41 |  *			fix wcache setup. | 
 | 42 |  */ | 
 | 43 |  | 
 | 44 | #define IDEDISK_VERSION	"1.18" | 
 | 45 |  | 
 | 46 | #undef REALLY_SLOW_IO		/* most systems can safely undef this */ | 
 | 47 |  | 
 | 48 | //#define DEBUG | 
 | 49 |  | 
 | 50 | #include <linux/config.h> | 
 | 51 | #include <linux/module.h> | 
 | 52 | #include <linux/types.h> | 
 | 53 | #include <linux/string.h> | 
 | 54 | #include <linux/kernel.h> | 
 | 55 | #include <linux/timer.h> | 
 | 56 | #include <linux/mm.h> | 
 | 57 | #include <linux/interrupt.h> | 
 | 58 | #include <linux/major.h> | 
 | 59 | #include <linux/errno.h> | 
 | 60 | #include <linux/genhd.h> | 
 | 61 | #include <linux/slab.h> | 
 | 62 | #include <linux/delay.h> | 
 | 63 |  | 
 | 64 | #define _IDE_DISK | 
 | 65 |  | 
 | 66 | #include <linux/ide.h> | 
 | 67 |  | 
 | 68 | #include <asm/byteorder.h> | 
 | 69 | #include <asm/irq.h> | 
 | 70 | #include <asm/uaccess.h> | 
 | 71 | #include <asm/io.h> | 
 | 72 | #include <asm/div64.h> | 
 | 73 |  | 
 | 74 | struct ide_disk_obj { | 
 | 75 | 	ide_drive_t	*drive; | 
 | 76 | 	ide_driver_t	*driver; | 
 | 77 | 	struct gendisk	*disk; | 
 | 78 | 	struct kref	kref; | 
 | 79 | }; | 
 | 80 |  | 
 | 81 | static DECLARE_MUTEX(idedisk_ref_sem); | 
 | 82 |  | 
 | 83 | #define to_ide_disk(obj) container_of(obj, struct ide_disk_obj, kref) | 
 | 84 |  | 
 | 85 | #define ide_disk_g(disk) \ | 
 | 86 | 	container_of((disk)->private_data, struct ide_disk_obj, driver) | 
 | 87 |  | 
 | 88 | static struct ide_disk_obj *ide_disk_get(struct gendisk *disk) | 
 | 89 | { | 
 | 90 | 	struct ide_disk_obj *idkp = NULL; | 
 | 91 |  | 
 | 92 | 	down(&idedisk_ref_sem); | 
 | 93 | 	idkp = ide_disk_g(disk); | 
 | 94 | 	if (idkp) | 
 | 95 | 		kref_get(&idkp->kref); | 
 | 96 | 	up(&idedisk_ref_sem); | 
 | 97 | 	return idkp; | 
 | 98 | } | 
 | 99 |  | 
 | 100 | static void ide_disk_release(struct kref *); | 
 | 101 |  | 
 | 102 | static void ide_disk_put(struct ide_disk_obj *idkp) | 
 | 103 | { | 
 | 104 | 	down(&idedisk_ref_sem); | 
 | 105 | 	kref_put(&idkp->kref, ide_disk_release); | 
 | 106 | 	up(&idedisk_ref_sem); | 
 | 107 | } | 
 | 108 |  | 
 | 109 | /* | 
 | 110 |  * lba_capacity_is_ok() performs a sanity check on the claimed "lba_capacity" | 
 | 111 |  * value for this drive (from its reported identification information). | 
 | 112 |  * | 
 | 113 |  * Returns:	1 if lba_capacity looks sensible | 
 | 114 |  *		0 otherwise | 
 | 115 |  * | 
 | 116 |  * It is called only once for each drive. | 
 | 117 |  */ | 
 | 118 | static int lba_capacity_is_ok (struct hd_driveid *id) | 
 | 119 | { | 
 | 120 | 	unsigned long lba_sects, chs_sects, head, tail; | 
 | 121 |  | 
 | 122 | 	/* | 
 | 123 | 	 * The ATA spec tells large drives to return | 
 | 124 | 	 * C/H/S = 16383/16/63 independent of their size. | 
 | 125 | 	 * Some drives can be jumpered to use 15 heads instead of 16. | 
 | 126 | 	 * Some drives can be jumpered to use 4092 cyls instead of 16383. | 
 | 127 | 	 */ | 
 | 128 | 	if ((id->cyls == 16383 | 
 | 129 | 	     || (id->cyls == 4092 && id->cur_cyls == 16383)) && | 
 | 130 | 	    id->sectors == 63 && | 
 | 131 | 	    (id->heads == 15 || id->heads == 16) && | 
 | 132 | 	    (id->lba_capacity >= 16383*63*id->heads)) | 
 | 133 | 		return 1; | 
 | 134 |  | 
 | 135 | 	lba_sects   = id->lba_capacity; | 
 | 136 | 	chs_sects   = id->cyls * id->heads * id->sectors; | 
 | 137 |  | 
 | 138 | 	/* perform a rough sanity check on lba_sects:  within 10% is OK */ | 
 | 139 | 	if ((lba_sects - chs_sects) < chs_sects/10) | 
 | 140 | 		return 1; | 
 | 141 |  | 
 | 142 | 	/* some drives have the word order reversed */ | 
 | 143 | 	head = ((lba_sects >> 16) & 0xffff); | 
 | 144 | 	tail = (lba_sects & 0xffff); | 
 | 145 | 	lba_sects = (head | (tail << 16)); | 
 | 146 | 	if ((lba_sects - chs_sects) < chs_sects/10) { | 
 | 147 | 		id->lba_capacity = lba_sects; | 
 | 148 | 		return 1;	/* lba_capacity is (now) good */ | 
 | 149 | 	} | 
 | 150 |  | 
 | 151 | 	return 0;	/* lba_capacity value may be bad */ | 
 | 152 | } | 
 | 153 |  | 
 | 154 | /* | 
 | 155 |  * __ide_do_rw_disk() issues READ and WRITE commands to a disk, | 
 | 156 |  * using LBA if supported, or CHS otherwise, to address sectors. | 
 | 157 |  */ | 
 | 158 | static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, sector_t block) | 
 | 159 | { | 
 | 160 | 	ide_hwif_t *hwif	= HWIF(drive); | 
 | 161 | 	unsigned int dma	= drive->using_dma; | 
 | 162 | 	u8 lba48		= (drive->addressing == 1) ? 1 : 0; | 
 | 163 | 	task_ioreg_t command	= WIN_NOP; | 
 | 164 | 	ata_nsector_t		nsectors; | 
 | 165 |  | 
 | 166 | 	nsectors.all		= (u16) rq->nr_sectors; | 
 | 167 |  | 
 | 168 | 	if (hwif->no_lba48_dma && lba48 && dma) { | 
 | 169 | 		if (block + rq->nr_sectors > 1ULL << 28) | 
 | 170 | 			dma = 0; | 
 | 171 | 		else | 
 | 172 | 			lba48 = 0; | 
 | 173 | 	} | 
 | 174 |  | 
 | 175 | 	if (!dma) { | 
 | 176 | 		ide_init_sg_cmd(drive, rq); | 
 | 177 | 		ide_map_sg(drive, rq); | 
 | 178 | 	} | 
 | 179 |  | 
 | 180 | 	if (IDE_CONTROL_REG) | 
 | 181 | 		hwif->OUTB(drive->ctl, IDE_CONTROL_REG); | 
 | 182 |  | 
 | 183 | 	/* FIXME: SELECT_MASK(drive, 0) ? */ | 
 | 184 |  | 
 | 185 | 	if (drive->select.b.lba) { | 
 | 186 | 		if (lba48) { | 
 | 187 | 			task_ioreg_t tasklets[10]; | 
 | 188 |  | 
 | 189 | 			pr_debug("%s: LBA=0x%012llx\n", drive->name, block); | 
 | 190 |  | 
 | 191 | 			tasklets[0] = 0; | 
 | 192 | 			tasklets[1] = 0; | 
 | 193 | 			tasklets[2] = nsectors.b.low; | 
 | 194 | 			tasklets[3] = nsectors.b.high; | 
 | 195 | 			tasklets[4] = (task_ioreg_t) block; | 
 | 196 | 			tasklets[5] = (task_ioreg_t) (block>>8); | 
 | 197 | 			tasklets[6] = (task_ioreg_t) (block>>16); | 
 | 198 | 			tasklets[7] = (task_ioreg_t) (block>>24); | 
 | 199 | 			if (sizeof(block) == 4) { | 
 | 200 | 				tasklets[8] = (task_ioreg_t) 0; | 
 | 201 | 				tasklets[9] = (task_ioreg_t) 0; | 
 | 202 | 			} else { | 
 | 203 | 				tasklets[8] = (task_ioreg_t)((u64)block >> 32); | 
 | 204 | 				tasklets[9] = (task_ioreg_t)((u64)block >> 40); | 
 | 205 | 			} | 
 | 206 | #ifdef DEBUG | 
 | 207 | 			printk("%s: 0x%02x%02x 0x%02x%02x%02x%02x%02x%02x\n", | 
 | 208 | 				drive->name, tasklets[3], tasklets[2], | 
 | 209 | 				tasklets[9], tasklets[8], tasklets[7], | 
 | 210 | 				tasklets[6], tasklets[5], tasklets[4]); | 
 | 211 | #endif | 
 | 212 | 			hwif->OUTB(tasklets[1], IDE_FEATURE_REG); | 
 | 213 | 			hwif->OUTB(tasklets[3], IDE_NSECTOR_REG); | 
 | 214 | 			hwif->OUTB(tasklets[7], IDE_SECTOR_REG); | 
 | 215 | 			hwif->OUTB(tasklets[8], IDE_LCYL_REG); | 
 | 216 | 			hwif->OUTB(tasklets[9], IDE_HCYL_REG); | 
 | 217 |  | 
 | 218 | 			hwif->OUTB(tasklets[0], IDE_FEATURE_REG); | 
 | 219 | 			hwif->OUTB(tasklets[2], IDE_NSECTOR_REG); | 
 | 220 | 			hwif->OUTB(tasklets[4], IDE_SECTOR_REG); | 
 | 221 | 			hwif->OUTB(tasklets[5], IDE_LCYL_REG); | 
 | 222 | 			hwif->OUTB(tasklets[6], IDE_HCYL_REG); | 
 | 223 | 			hwif->OUTB(0x00|drive->select.all,IDE_SELECT_REG); | 
 | 224 | 		} else { | 
 | 225 | 			hwif->OUTB(0x00, IDE_FEATURE_REG); | 
 | 226 | 			hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG); | 
 | 227 | 			hwif->OUTB(block, IDE_SECTOR_REG); | 
 | 228 | 			hwif->OUTB(block>>=8, IDE_LCYL_REG); | 
 | 229 | 			hwif->OUTB(block>>=8, IDE_HCYL_REG); | 
 | 230 | 			hwif->OUTB(((block>>8)&0x0f)|drive->select.all,IDE_SELECT_REG); | 
 | 231 | 		} | 
 | 232 | 	} else { | 
 | 233 | 		unsigned int sect,head,cyl,track; | 
 | 234 | 		track = (int)block / drive->sect; | 
 | 235 | 		sect  = (int)block % drive->sect + 1; | 
 | 236 | 		hwif->OUTB(sect, IDE_SECTOR_REG); | 
 | 237 | 		head  = track % drive->head; | 
 | 238 | 		cyl   = track / drive->head; | 
 | 239 |  | 
 | 240 | 		pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect); | 
 | 241 |  | 
 | 242 | 		hwif->OUTB(0x00, IDE_FEATURE_REG); | 
 | 243 | 		hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG); | 
 | 244 | 		hwif->OUTB(cyl, IDE_LCYL_REG); | 
 | 245 | 		hwif->OUTB(cyl>>8, IDE_HCYL_REG); | 
 | 246 | 		hwif->OUTB(head|drive->select.all,IDE_SELECT_REG); | 
 | 247 | 	} | 
 | 248 |  | 
 | 249 | 	if (dma) { | 
 | 250 | 		if (!hwif->dma_setup(drive)) { | 
 | 251 | 			if (rq_data_dir(rq)) { | 
 | 252 | 				command = lba48 ? WIN_WRITEDMA_EXT : WIN_WRITEDMA; | 
 | 253 | 				if (drive->vdma) | 
 | 254 | 					command = lba48 ? WIN_WRITE_EXT: WIN_WRITE; | 
 | 255 | 			} else { | 
 | 256 | 				command = lba48 ? WIN_READDMA_EXT : WIN_READDMA; | 
 | 257 | 				if (drive->vdma) | 
 | 258 | 					command = lba48 ? WIN_READ_EXT: WIN_READ; | 
 | 259 | 			} | 
 | 260 | 			hwif->dma_exec_cmd(drive, command); | 
 | 261 | 			hwif->dma_start(drive); | 
 | 262 | 			return ide_started; | 
 | 263 | 		} | 
 | 264 | 		/* fallback to PIO */ | 
 | 265 | 		ide_init_sg_cmd(drive, rq); | 
 | 266 | 	} | 
 | 267 |  | 
 | 268 | 	if (rq_data_dir(rq) == READ) { | 
 | 269 |  | 
 | 270 | 		if (drive->mult_count) { | 
 | 271 | 			hwif->data_phase = TASKFILE_MULTI_IN; | 
 | 272 | 			command = lba48 ? WIN_MULTREAD_EXT : WIN_MULTREAD; | 
 | 273 | 		} else { | 
 | 274 | 			hwif->data_phase = TASKFILE_IN; | 
 | 275 | 			command = lba48 ? WIN_READ_EXT : WIN_READ; | 
 | 276 | 		} | 
 | 277 |  | 
 | 278 | 		ide_execute_command(drive, command, &task_in_intr, WAIT_CMD, NULL); | 
 | 279 | 		return ide_started; | 
 | 280 | 	} else { | 
 | 281 | 		if (drive->mult_count) { | 
 | 282 | 			hwif->data_phase = TASKFILE_MULTI_OUT; | 
 | 283 | 			command = lba48 ? WIN_MULTWRITE_EXT : WIN_MULTWRITE; | 
 | 284 | 		} else { | 
 | 285 | 			hwif->data_phase = TASKFILE_OUT; | 
 | 286 | 			command = lba48 ? WIN_WRITE_EXT : WIN_WRITE; | 
 | 287 | 		} | 
 | 288 |  | 
 | 289 | 		/* FIXME: ->OUTBSYNC ? */ | 
 | 290 | 		hwif->OUTB(command, IDE_COMMAND_REG); | 
 | 291 |  | 
 | 292 | 		return pre_task_out_intr(drive, rq); | 
 | 293 | 	} | 
 | 294 | } | 
 | 295 |  | 
 | 296 | /* | 
 | 297 |  * 268435455  == 137439 MB or 28bit limit | 
 | 298 |  * 320173056  == 163929 MB or 48bit addressing | 
 | 299 |  * 1073741822 == 549756 MB or 48bit addressing fake drive | 
 | 300 |  */ | 
 | 301 |  | 
 | 302 | static ide_startstop_t ide_do_rw_disk (ide_drive_t *drive, struct request *rq, sector_t block) | 
 | 303 | { | 
 | 304 | 	ide_hwif_t *hwif = HWIF(drive); | 
 | 305 |  | 
 | 306 | 	BUG_ON(drive->blocked); | 
 | 307 |  | 
 | 308 | 	if (!blk_fs_request(rq)) { | 
 | 309 | 		blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command"); | 
 | 310 | 		ide_end_request(drive, 0, 0); | 
 | 311 | 		return ide_stopped; | 
 | 312 | 	} | 
 | 313 |  | 
 | 314 | 	pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n", | 
 | 315 | 		 drive->name, rq_data_dir(rq) == READ ? "read" : "writ", | 
 | 316 | 		 block, rq->nr_sectors, (unsigned long)rq->buffer); | 
 | 317 |  | 
 | 318 | 	if (hwif->rw_disk) | 
 | 319 | 		hwif->rw_disk(drive, rq); | 
 | 320 |  | 
 | 321 | 	return __ide_do_rw_disk(drive, rq, block); | 
 | 322 | } | 
 | 323 |  | 
 | 324 | /* | 
 | 325 |  * Queries for true maximum capacity of the drive. | 
 | 326 |  * Returns maximum LBA address (> 0) of the drive, 0 if failed. | 
 | 327 |  */ | 
 | 328 | static unsigned long idedisk_read_native_max_address(ide_drive_t *drive) | 
 | 329 | { | 
 | 330 | 	ide_task_t args; | 
 | 331 | 	unsigned long addr = 0; | 
 | 332 |  | 
 | 333 | 	/* Create IDE/ATA command request structure */ | 
 | 334 | 	memset(&args, 0, sizeof(ide_task_t)); | 
 | 335 | 	args.tfRegister[IDE_SELECT_OFFSET]	= 0x40; | 
 | 336 | 	args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_READ_NATIVE_MAX; | 
 | 337 | 	args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
 | 338 | 	args.handler				= &task_no_data_intr; | 
 | 339 | 	/* submit command request */ | 
 | 340 | 	ide_raw_taskfile(drive, &args, NULL); | 
 | 341 |  | 
 | 342 | 	/* if OK, compute maximum address value */ | 
 | 343 | 	if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { | 
 | 344 | 		addr = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24) | 
 | 345 | 		     | ((args.tfRegister[  IDE_HCYL_OFFSET]       ) << 16) | 
 | 346 | 		     | ((args.tfRegister[  IDE_LCYL_OFFSET]       ) <<  8) | 
 | 347 | 		     | ((args.tfRegister[IDE_SECTOR_OFFSET]       )); | 
 | 348 | 		addr++;	/* since the return value is (maxlba - 1), we add 1 */ | 
 | 349 | 	} | 
 | 350 | 	return addr; | 
 | 351 | } | 
 | 352 |  | 
 | 353 | static unsigned long long idedisk_read_native_max_address_ext(ide_drive_t *drive) | 
 | 354 | { | 
 | 355 | 	ide_task_t args; | 
 | 356 | 	unsigned long long addr = 0; | 
 | 357 |  | 
 | 358 | 	/* Create IDE/ATA command request structure */ | 
 | 359 | 	memset(&args, 0, sizeof(ide_task_t)); | 
 | 360 |  | 
 | 361 | 	args.tfRegister[IDE_SELECT_OFFSET]	= 0x40; | 
 | 362 | 	args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_READ_NATIVE_MAX_EXT; | 
 | 363 | 	args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
 | 364 | 	args.handler				= &task_no_data_intr; | 
 | 365 |         /* submit command request */ | 
 | 366 |         ide_raw_taskfile(drive, &args, NULL); | 
 | 367 |  | 
 | 368 | 	/* if OK, compute maximum address value */ | 
 | 369 | 	if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { | 
 | 370 | 		u32 high = (args.hobRegister[IDE_HCYL_OFFSET] << 16) | | 
 | 371 | 			   (args.hobRegister[IDE_LCYL_OFFSET] <<  8) | | 
 | 372 | 			    args.hobRegister[IDE_SECTOR_OFFSET]; | 
 | 373 | 		u32 low  = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) | | 
 | 374 | 			   ((args.tfRegister[IDE_LCYL_OFFSET])<<8) | | 
 | 375 | 			    (args.tfRegister[IDE_SECTOR_OFFSET]); | 
 | 376 | 		addr = ((__u64)high << 24) | low; | 
 | 377 | 		addr++;	/* since the return value is (maxlba - 1), we add 1 */ | 
 | 378 | 	} | 
 | 379 | 	return addr; | 
 | 380 | } | 
 | 381 |  | 
 | 382 | /* | 
 | 383 |  * Sets maximum virtual LBA address of the drive. | 
 | 384 |  * Returns new maximum virtual LBA address (> 0) or 0 on failure. | 
 | 385 |  */ | 
 | 386 | static unsigned long idedisk_set_max_address(ide_drive_t *drive, unsigned long addr_req) | 
 | 387 | { | 
 | 388 | 	ide_task_t args; | 
 | 389 | 	unsigned long addr_set = 0; | 
 | 390 | 	 | 
 | 391 | 	addr_req--; | 
 | 392 | 	/* Create IDE/ATA command request structure */ | 
 | 393 | 	memset(&args, 0, sizeof(ide_task_t)); | 
 | 394 | 	args.tfRegister[IDE_SECTOR_OFFSET]	= ((addr_req >>  0) & 0xff); | 
 | 395 | 	args.tfRegister[IDE_LCYL_OFFSET]	= ((addr_req >>  8) & 0xff); | 
 | 396 | 	args.tfRegister[IDE_HCYL_OFFSET]	= ((addr_req >> 16) & 0xff); | 
 | 397 | 	args.tfRegister[IDE_SELECT_OFFSET]	= ((addr_req >> 24) & 0x0f) | 0x40; | 
 | 398 | 	args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SET_MAX; | 
 | 399 | 	args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
 | 400 | 	args.handler				= &task_no_data_intr; | 
 | 401 | 	/* submit command request */ | 
 | 402 | 	ide_raw_taskfile(drive, &args, NULL); | 
 | 403 | 	/* if OK, read new maximum address value */ | 
 | 404 | 	if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { | 
 | 405 | 		addr_set = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24) | 
 | 406 | 			 | ((args.tfRegister[  IDE_HCYL_OFFSET]       ) << 16) | 
 | 407 | 			 | ((args.tfRegister[  IDE_LCYL_OFFSET]       ) <<  8) | 
 | 408 | 			 | ((args.tfRegister[IDE_SECTOR_OFFSET]       )); | 
 | 409 | 		addr_set++; | 
 | 410 | 	} | 
 | 411 | 	return addr_set; | 
 | 412 | } | 
 | 413 |  | 
 | 414 | static unsigned long long idedisk_set_max_address_ext(ide_drive_t *drive, unsigned long long addr_req) | 
 | 415 | { | 
 | 416 | 	ide_task_t args; | 
 | 417 | 	unsigned long long addr_set = 0; | 
 | 418 |  | 
 | 419 | 	addr_req--; | 
 | 420 | 	/* Create IDE/ATA command request structure */ | 
 | 421 | 	memset(&args, 0, sizeof(ide_task_t)); | 
 | 422 | 	args.tfRegister[IDE_SECTOR_OFFSET]	= ((addr_req >>  0) & 0xff); | 
 | 423 | 	args.tfRegister[IDE_LCYL_OFFSET]	= ((addr_req >>= 8) & 0xff); | 
 | 424 | 	args.tfRegister[IDE_HCYL_OFFSET]	= ((addr_req >>= 8) & 0xff); | 
 | 425 | 	args.tfRegister[IDE_SELECT_OFFSET]      = 0x40; | 
 | 426 | 	args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SET_MAX_EXT; | 
 | 427 | 	args.hobRegister[IDE_SECTOR_OFFSET]	= (addr_req >>= 8) & 0xff; | 
 | 428 | 	args.hobRegister[IDE_LCYL_OFFSET]	= (addr_req >>= 8) & 0xff; | 
 | 429 | 	args.hobRegister[IDE_HCYL_OFFSET]	= (addr_req >>= 8) & 0xff; | 
 | 430 | 	args.hobRegister[IDE_SELECT_OFFSET]	= 0x40; | 
 | 431 | 	args.hobRegister[IDE_CONTROL_OFFSET_HOB]= (drive->ctl|0x80); | 
 | 432 | 	args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
 | 433 | 	args.handler				= &task_no_data_intr; | 
 | 434 | 	/* submit command request */ | 
 | 435 | 	ide_raw_taskfile(drive, &args, NULL); | 
 | 436 | 	/* if OK, compute maximum address value */ | 
 | 437 | 	if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { | 
 | 438 | 		u32 high = (args.hobRegister[IDE_HCYL_OFFSET] << 16) | | 
 | 439 | 			   (args.hobRegister[IDE_LCYL_OFFSET] <<  8) | | 
 | 440 | 			    args.hobRegister[IDE_SECTOR_OFFSET]; | 
 | 441 | 		u32 low  = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) | | 
 | 442 | 			   ((args.tfRegister[IDE_LCYL_OFFSET])<<8) | | 
 | 443 | 			    (args.tfRegister[IDE_SECTOR_OFFSET]); | 
 | 444 | 		addr_set = ((__u64)high << 24) | low; | 
 | 445 | 		addr_set++; | 
 | 446 | 	} | 
 | 447 | 	return addr_set; | 
 | 448 | } | 
 | 449 |  | 
 | 450 | static unsigned long long sectors_to_MB(unsigned long long n) | 
 | 451 | { | 
 | 452 | 	n <<= 9;		/* make it bytes */ | 
 | 453 | 	do_div(n, 1000000);	/* make it MB */ | 
 | 454 | 	return n; | 
 | 455 | } | 
 | 456 |  | 
 | 457 | /* | 
 | 458 |  * Bits 10 of command_set_1 and cfs_enable_1 must be equal, | 
 | 459 |  * so on non-buggy drives we need test only one. | 
 | 460 |  * However, we should also check whether these fields are valid. | 
 | 461 |  */ | 
 | 462 | static inline int idedisk_supports_hpa(const struct hd_driveid *id) | 
 | 463 | { | 
 | 464 | 	return (id->command_set_1 & 0x0400) && (id->cfs_enable_1 & 0x0400); | 
 | 465 | } | 
 | 466 |  | 
 | 467 | /* | 
 | 468 |  * The same here. | 
 | 469 |  */ | 
 | 470 | static inline int idedisk_supports_lba48(const struct hd_driveid *id) | 
 | 471 | { | 
 | 472 | 	return (id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400) | 
 | 473 | 	       && id->lba_capacity_2; | 
 | 474 | } | 
 | 475 |  | 
 | 476 | static inline void idedisk_check_hpa(ide_drive_t *drive) | 
 | 477 | { | 
 | 478 | 	unsigned long long capacity, set_max; | 
 | 479 | 	int lba48 = idedisk_supports_lba48(drive->id); | 
 | 480 |  | 
 | 481 | 	capacity = drive->capacity64; | 
 | 482 | 	if (lba48) | 
 | 483 | 		set_max = idedisk_read_native_max_address_ext(drive); | 
 | 484 | 	else | 
 | 485 | 		set_max = idedisk_read_native_max_address(drive); | 
 | 486 |  | 
 | 487 | 	if (set_max <= capacity) | 
 | 488 | 		return; | 
 | 489 |  | 
 | 490 | 	printk(KERN_INFO "%s: Host Protected Area detected.\n" | 
 | 491 | 			 "\tcurrent capacity is %llu sectors (%llu MB)\n" | 
 | 492 | 			 "\tnative  capacity is %llu sectors (%llu MB)\n", | 
 | 493 | 			 drive->name, | 
 | 494 | 			 capacity, sectors_to_MB(capacity), | 
 | 495 | 			 set_max, sectors_to_MB(set_max)); | 
 | 496 |  | 
 | 497 | 	if (lba48) | 
 | 498 | 		set_max = idedisk_set_max_address_ext(drive, set_max); | 
 | 499 | 	else | 
 | 500 | 		set_max = idedisk_set_max_address(drive, set_max); | 
 | 501 | 	if (set_max) { | 
 | 502 | 		drive->capacity64 = set_max; | 
 | 503 | 		printk(KERN_INFO "%s: Host Protected Area disabled.\n", | 
 | 504 | 				 drive->name); | 
 | 505 | 	} | 
 | 506 | } | 
 | 507 |  | 
 | 508 | /* | 
 | 509 |  * Compute drive->capacity, the full capacity of the drive | 
 | 510 |  * Called with drive->id != NULL. | 
 | 511 |  * | 
 | 512 |  * To compute capacity, this uses either of | 
 | 513 |  * | 
 | 514 |  *    1. CHS value set by user       (whatever user sets will be trusted) | 
 | 515 |  *    2. LBA value from target drive (require new ATA feature) | 
 | 516 |  *    3. LBA value from system BIOS  (new one is OK, old one may break) | 
 | 517 |  *    4. CHS value from system BIOS  (traditional style) | 
 | 518 |  * | 
 | 519 |  * in above order (i.e., if value of higher priority is available, | 
 | 520 |  * reset will be ignored). | 
 | 521 |  */ | 
 | 522 | static void init_idedisk_capacity (ide_drive_t  *drive) | 
 | 523 | { | 
 | 524 | 	struct hd_driveid *id = drive->id; | 
 | 525 | 	/* | 
 | 526 | 	 * If this drive supports the Host Protected Area feature set, | 
 | 527 | 	 * then we may need to change our opinion about the drive's capacity. | 
 | 528 | 	 */ | 
 | 529 | 	int hpa = idedisk_supports_hpa(id); | 
 | 530 |  | 
 | 531 | 	if (idedisk_supports_lba48(id)) { | 
 | 532 | 		/* drive speaks 48-bit LBA */ | 
 | 533 | 		drive->select.b.lba = 1; | 
 | 534 | 		drive->capacity64 = id->lba_capacity_2; | 
 | 535 | 		if (hpa) | 
 | 536 | 			idedisk_check_hpa(drive); | 
 | 537 | 	} else if ((id->capability & 2) && lba_capacity_is_ok(id)) { | 
 | 538 | 		/* drive speaks 28-bit LBA */ | 
 | 539 | 		drive->select.b.lba = 1; | 
 | 540 | 		drive->capacity64 = id->lba_capacity; | 
 | 541 | 		if (hpa) | 
 | 542 | 			idedisk_check_hpa(drive); | 
 | 543 | 	} else { | 
 | 544 | 		/* drive speaks boring old 28-bit CHS */ | 
 | 545 | 		drive->capacity64 = drive->cyl * drive->head * drive->sect; | 
 | 546 | 	} | 
 | 547 | } | 
 | 548 |  | 
 | 549 | static sector_t idedisk_capacity (ide_drive_t *drive) | 
 | 550 | { | 
 | 551 | 	return drive->capacity64 - drive->sect0; | 
 | 552 | } | 
 | 553 |  | 
 | 554 | #ifdef CONFIG_PROC_FS | 
 | 555 |  | 
 | 556 | static int smart_enable(ide_drive_t *drive) | 
 | 557 | { | 
 | 558 | 	ide_task_t args; | 
 | 559 |  | 
 | 560 | 	memset(&args, 0, sizeof(ide_task_t)); | 
 | 561 | 	args.tfRegister[IDE_FEATURE_OFFSET]	= SMART_ENABLE; | 
 | 562 | 	args.tfRegister[IDE_LCYL_OFFSET]	= SMART_LCYL_PASS; | 
 | 563 | 	args.tfRegister[IDE_HCYL_OFFSET]	= SMART_HCYL_PASS; | 
 | 564 | 	args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SMART; | 
 | 565 | 	args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
 | 566 | 	args.handler				= &task_no_data_intr; | 
 | 567 | 	return ide_raw_taskfile(drive, &args, NULL); | 
 | 568 | } | 
 | 569 |  | 
 | 570 | static int get_smart_values(ide_drive_t *drive, u8 *buf) | 
 | 571 | { | 
 | 572 | 	ide_task_t args; | 
 | 573 |  | 
 | 574 | 	memset(&args, 0, sizeof(ide_task_t)); | 
 | 575 | 	args.tfRegister[IDE_FEATURE_OFFSET]	= SMART_READ_VALUES; | 
 | 576 | 	args.tfRegister[IDE_NSECTOR_OFFSET]	= 0x01; | 
 | 577 | 	args.tfRegister[IDE_LCYL_OFFSET]	= SMART_LCYL_PASS; | 
 | 578 | 	args.tfRegister[IDE_HCYL_OFFSET]	= SMART_HCYL_PASS; | 
 | 579 | 	args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SMART; | 
 | 580 | 	args.command_type			= IDE_DRIVE_TASK_IN; | 
 | 581 | 	args.data_phase				= TASKFILE_IN; | 
 | 582 | 	args.handler				= &task_in_intr; | 
 | 583 | 	(void) smart_enable(drive); | 
 | 584 | 	return ide_raw_taskfile(drive, &args, buf); | 
 | 585 | } | 
 | 586 |  | 
 | 587 | static int get_smart_thresholds(ide_drive_t *drive, u8 *buf) | 
 | 588 | { | 
 | 589 | 	ide_task_t args; | 
 | 590 | 	memset(&args, 0, sizeof(ide_task_t)); | 
 | 591 | 	args.tfRegister[IDE_FEATURE_OFFSET]	= SMART_READ_THRESHOLDS; | 
 | 592 | 	args.tfRegister[IDE_NSECTOR_OFFSET]	= 0x01; | 
 | 593 | 	args.tfRegister[IDE_LCYL_OFFSET]	= SMART_LCYL_PASS; | 
 | 594 | 	args.tfRegister[IDE_HCYL_OFFSET]	= SMART_HCYL_PASS; | 
 | 595 | 	args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SMART; | 
 | 596 | 	args.command_type			= IDE_DRIVE_TASK_IN; | 
 | 597 | 	args.data_phase				= TASKFILE_IN; | 
 | 598 | 	args.handler				= &task_in_intr; | 
 | 599 | 	(void) smart_enable(drive); | 
 | 600 | 	return ide_raw_taskfile(drive, &args, buf); | 
 | 601 | } | 
 | 602 |  | 
 | 603 | static int proc_idedisk_read_cache | 
 | 604 | 	(char *page, char **start, off_t off, int count, int *eof, void *data) | 
 | 605 | { | 
 | 606 | 	ide_drive_t	*drive = (ide_drive_t *) data; | 
 | 607 | 	char		*out = page; | 
 | 608 | 	int		len; | 
 | 609 |  | 
 | 610 | 	if (drive->id_read) | 
 | 611 | 		len = sprintf(out,"%i\n", drive->id->buf_size / 2); | 
 | 612 | 	else | 
 | 613 | 		len = sprintf(out,"(none)\n"); | 
 | 614 | 	PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | 
 | 615 | } | 
 | 616 |  | 
 | 617 | static int proc_idedisk_read_capacity | 
 | 618 | 	(char *page, char **start, off_t off, int count, int *eof, void *data) | 
 | 619 | { | 
 | 620 | 	ide_drive_t*drive = (ide_drive_t *)data; | 
 | 621 | 	int len; | 
 | 622 |  | 
 | 623 | 	len = sprintf(page,"%llu\n", (long long)idedisk_capacity(drive)); | 
 | 624 | 	PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | 
 | 625 | } | 
 | 626 |  | 
 | 627 | static int proc_idedisk_read_smart_thresholds | 
 | 628 | 	(char *page, char **start, off_t off, int count, int *eof, void *data) | 
 | 629 | { | 
 | 630 | 	ide_drive_t	*drive = (ide_drive_t *)data; | 
 | 631 | 	int		len = 0, i = 0; | 
 | 632 |  | 
 | 633 | 	if (!get_smart_thresholds(drive, page)) { | 
 | 634 | 		unsigned short *val = (unsigned short *) page; | 
 | 635 | 		char *out = ((char *)val) + (SECTOR_WORDS * 4); | 
 | 636 | 		page = out; | 
 | 637 | 		do { | 
 | 638 | 			out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n'); | 
 | 639 | 			val += 1; | 
 | 640 | 		} while (i < (SECTOR_WORDS * 2)); | 
 | 641 | 		len = out - page; | 
 | 642 | 	} | 
 | 643 | 	PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | 
 | 644 | } | 
 | 645 |  | 
 | 646 | static int proc_idedisk_read_smart_values | 
 | 647 | 	(char *page, char **start, off_t off, int count, int *eof, void *data) | 
 | 648 | { | 
 | 649 | 	ide_drive_t	*drive = (ide_drive_t *)data; | 
 | 650 | 	int		len = 0, i = 0; | 
 | 651 |  | 
 | 652 | 	if (!get_smart_values(drive, page)) { | 
 | 653 | 		unsigned short *val = (unsigned short *) page; | 
 | 654 | 		char *out = ((char *)val) + (SECTOR_WORDS * 4); | 
 | 655 | 		page = out; | 
 | 656 | 		do { | 
 | 657 | 			out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n'); | 
 | 658 | 			val += 1; | 
 | 659 | 		} while (i < (SECTOR_WORDS * 2)); | 
 | 660 | 		len = out - page; | 
 | 661 | 	} | 
 | 662 | 	PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | 
 | 663 | } | 
 | 664 |  | 
 | 665 | static ide_proc_entry_t idedisk_proc[] = { | 
 | 666 | 	{ "cache",		S_IFREG|S_IRUGO,	proc_idedisk_read_cache,		NULL }, | 
 | 667 | 	{ "capacity",		S_IFREG|S_IRUGO,	proc_idedisk_read_capacity,		NULL }, | 
 | 668 | 	{ "geometry",		S_IFREG|S_IRUGO,	proc_ide_read_geometry,			NULL }, | 
 | 669 | 	{ "smart_values",	S_IFREG|S_IRUSR,	proc_idedisk_read_smart_values,		NULL }, | 
 | 670 | 	{ "smart_thresholds",	S_IFREG|S_IRUSR,	proc_idedisk_read_smart_thresholds,	NULL }, | 
 | 671 | 	{ NULL, 0, NULL, NULL } | 
 | 672 | }; | 
 | 673 |  | 
 | 674 | #else | 
 | 675 |  | 
 | 676 | #define	idedisk_proc	NULL | 
 | 677 |  | 
 | 678 | #endif	/* CONFIG_PROC_FS */ | 
 | 679 |  | 
 | 680 | static void idedisk_end_flush(request_queue_t *q, struct request *flush_rq) | 
 | 681 | { | 
 | 682 | 	ide_drive_t *drive = q->queuedata; | 
 | 683 | 	struct request *rq = flush_rq->end_io_data; | 
 | 684 | 	int good_sectors = rq->hard_nr_sectors; | 
 | 685 | 	int bad_sectors; | 
 | 686 | 	sector_t sector; | 
 | 687 |  | 
 | 688 | 	if (flush_rq->errors & ABRT_ERR) { | 
 | 689 | 		printk(KERN_ERR "%s: barrier support doesn't work\n", drive->name); | 
 | 690 | 		blk_queue_ordered(drive->queue, QUEUE_ORDERED_NONE); | 
 | 691 | 		blk_queue_issue_flush_fn(drive->queue, NULL); | 
 | 692 | 		good_sectors = 0; | 
 | 693 | 	} else if (flush_rq->errors) { | 
 | 694 | 		good_sectors = 0; | 
 | 695 | 		if (blk_barrier_preflush(rq)) { | 
 | 696 | 			sector = ide_get_error_location(drive,flush_rq->buffer); | 
 | 697 | 			if ((sector >= rq->hard_sector) && | 
 | 698 | 			    (sector < rq->hard_sector + rq->hard_nr_sectors)) | 
 | 699 | 				good_sectors = sector - rq->hard_sector; | 
 | 700 | 		} | 
 | 701 | 	} | 
 | 702 |  | 
 | 703 | 	if (flush_rq->errors) | 
 | 704 | 		printk(KERN_ERR "%s: failed barrier write: " | 
 | 705 | 				"sector=%Lx(good=%d/bad=%d)\n", | 
 | 706 | 				drive->name, (unsigned long long)rq->sector, | 
 | 707 | 				good_sectors, | 
 | 708 | 				(int) (rq->hard_nr_sectors-good_sectors)); | 
 | 709 |  | 
 | 710 | 	bad_sectors = rq->hard_nr_sectors - good_sectors; | 
 | 711 |  | 
 | 712 | 	if (good_sectors) | 
 | 713 | 		__ide_end_request(drive, rq, 1, good_sectors); | 
 | 714 | 	if (bad_sectors) | 
 | 715 | 		__ide_end_request(drive, rq, 0, bad_sectors); | 
 | 716 | } | 
 | 717 |  | 
 | 718 | static int idedisk_prepare_flush(request_queue_t *q, struct request *rq) | 
 | 719 | { | 
 | 720 | 	ide_drive_t *drive = q->queuedata; | 
 | 721 |  | 
 | 722 | 	if (!drive->wcache) | 
 | 723 | 		return 0; | 
 | 724 |  | 
 | 725 | 	memset(rq->cmd, 0, sizeof(rq->cmd)); | 
 | 726 |  | 
 | 727 | 	if (ide_id_has_flush_cache_ext(drive->id) && | 
 | 728 | 	    (drive->capacity64 >= (1UL << 28))) | 
 | 729 | 		rq->cmd[0] = WIN_FLUSH_CACHE_EXT; | 
 | 730 | 	else | 
 | 731 | 		rq->cmd[0] = WIN_FLUSH_CACHE; | 
 | 732 |  | 
 | 733 |  | 
 | 734 | 	rq->flags |= REQ_DRIVE_TASK | REQ_SOFTBARRIER; | 
 | 735 | 	rq->buffer = rq->cmd; | 
 | 736 | 	return 1; | 
 | 737 | } | 
 | 738 |  | 
 | 739 | static int idedisk_issue_flush(request_queue_t *q, struct gendisk *disk, | 
 | 740 | 			       sector_t *error_sector) | 
 | 741 | { | 
 | 742 | 	ide_drive_t *drive = q->queuedata; | 
 | 743 | 	struct request *rq; | 
 | 744 | 	int ret; | 
 | 745 |  | 
 | 746 | 	if (!drive->wcache) | 
 | 747 | 		return 0; | 
 | 748 |  | 
 | 749 | 	rq = blk_get_request(q, WRITE, __GFP_WAIT); | 
 | 750 |  | 
 | 751 | 	idedisk_prepare_flush(q, rq); | 
 | 752 |  | 
 | 753 | 	ret = blk_execute_rq(q, disk, rq); | 
 | 754 |  | 
 | 755 | 	/* | 
 | 756 | 	 * if we failed and caller wants error offset, get it | 
 | 757 | 	 */ | 
 | 758 | 	if (ret && error_sector) | 
 | 759 | 		*error_sector = ide_get_error_location(drive, rq->cmd); | 
 | 760 |  | 
 | 761 | 	blk_put_request(rq); | 
 | 762 | 	return ret; | 
 | 763 | } | 
 | 764 |  | 
 | 765 | /* | 
 | 766 |  * This is tightly woven into the driver->do_special can not touch. | 
 | 767 |  * DON'T do it again until a total personality rewrite is committed. | 
 | 768 |  */ | 
 | 769 | static int set_multcount(ide_drive_t *drive, int arg) | 
 | 770 | { | 
 | 771 | 	struct request rq; | 
 | 772 |  | 
 | 773 | 	if (drive->special.b.set_multmode) | 
 | 774 | 		return -EBUSY; | 
 | 775 | 	ide_init_drive_cmd (&rq); | 
 | 776 | 	rq.flags = REQ_DRIVE_CMD; | 
 | 777 | 	drive->mult_req = arg; | 
 | 778 | 	drive->special.b.set_multmode = 1; | 
 | 779 | 	(void) ide_do_drive_cmd (drive, &rq, ide_wait); | 
 | 780 | 	return (drive->mult_count == arg) ? 0 : -EIO; | 
 | 781 | } | 
 | 782 |  | 
 | 783 | static int set_nowerr(ide_drive_t *drive, int arg) | 
 | 784 | { | 
 | 785 | 	if (ide_spin_wait_hwgroup(drive)) | 
 | 786 | 		return -EBUSY; | 
 | 787 | 	drive->nowerr = arg; | 
 | 788 | 	drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT; | 
 | 789 | 	spin_unlock_irq(&ide_lock); | 
 | 790 | 	return 0; | 
 | 791 | } | 
 | 792 |  | 
 | 793 | static int write_cache(ide_drive_t *drive, int arg) | 
 | 794 | { | 
 | 795 | 	ide_task_t args; | 
 | 796 | 	int err; | 
 | 797 |  | 
 | 798 | 	if (!ide_id_has_flush_cache(drive->id)) | 
 | 799 | 		return 1; | 
 | 800 |  | 
 | 801 | 	memset(&args, 0, sizeof(ide_task_t)); | 
 | 802 | 	args.tfRegister[IDE_FEATURE_OFFSET]	= (arg) ? | 
 | 803 | 			SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE; | 
 | 804 | 	args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SETFEATURES; | 
 | 805 | 	args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
 | 806 | 	args.handler				= &task_no_data_intr; | 
 | 807 |  | 
 | 808 | 	err = ide_raw_taskfile(drive, &args, NULL); | 
 | 809 | 	if (err) | 
 | 810 | 		return err; | 
 | 811 |  | 
 | 812 | 	drive->wcache = arg; | 
 | 813 | 	return 0; | 
 | 814 | } | 
 | 815 |  | 
 | 816 | static int do_idedisk_flushcache (ide_drive_t *drive) | 
 | 817 | { | 
 | 818 | 	ide_task_t args; | 
 | 819 |  | 
 | 820 | 	memset(&args, 0, sizeof(ide_task_t)); | 
 | 821 | 	if (ide_id_has_flush_cache_ext(drive->id)) | 
 | 822 | 		args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_FLUSH_CACHE_EXT; | 
 | 823 | 	else | 
 | 824 | 		args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_FLUSH_CACHE; | 
 | 825 | 	args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
 | 826 | 	args.handler				= &task_no_data_intr; | 
 | 827 | 	return ide_raw_taskfile(drive, &args, NULL); | 
 | 828 | } | 
 | 829 |  | 
 | 830 | static int set_acoustic (ide_drive_t *drive, int arg) | 
 | 831 | { | 
 | 832 | 	ide_task_t args; | 
 | 833 |  | 
 | 834 | 	memset(&args, 0, sizeof(ide_task_t)); | 
 | 835 | 	args.tfRegister[IDE_FEATURE_OFFSET]	= (arg) ? SETFEATURES_EN_AAM : | 
 | 836 | 							  SETFEATURES_DIS_AAM; | 
 | 837 | 	args.tfRegister[IDE_NSECTOR_OFFSET]	= arg; | 
 | 838 | 	args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SETFEATURES; | 
 | 839 | 	args.command_type = IDE_DRIVE_TASK_NO_DATA; | 
 | 840 | 	args.handler	  = &task_no_data_intr; | 
 | 841 | 	ide_raw_taskfile(drive, &args, NULL); | 
 | 842 | 	drive->acoustic = arg; | 
 | 843 | 	return 0; | 
 | 844 | } | 
 | 845 |  | 
 | 846 | /* | 
 | 847 |  * drive->addressing: | 
 | 848 |  *	0: 28-bit | 
 | 849 |  *	1: 48-bit | 
 | 850 |  *	2: 48-bit capable doing 28-bit | 
 | 851 |  */ | 
 | 852 | static int set_lba_addressing(ide_drive_t *drive, int arg) | 
 | 853 | { | 
 | 854 | 	drive->addressing =  0; | 
 | 855 |  | 
 | 856 | 	if (HWIF(drive)->no_lba48) | 
 | 857 | 		return 0; | 
 | 858 |  | 
 | 859 | 	if (!idedisk_supports_lba48(drive->id)) | 
 | 860 |                 return -EIO; | 
 | 861 | 	drive->addressing = arg; | 
 | 862 | 	return 0; | 
 | 863 | } | 
 | 864 |  | 
 | 865 | static void idedisk_add_settings(ide_drive_t *drive) | 
 | 866 | { | 
 | 867 | 	struct hd_driveid *id = drive->id; | 
 | 868 |  | 
 | 869 | 	ide_add_setting(drive,	"bios_cyl",		SETTING_RW,					-1,			-1,			TYPE_INT,	0,	65535,				1,	1,	&drive->bios_cyl,		NULL); | 
 | 870 | 	ide_add_setting(drive,	"bios_head",		SETTING_RW,					-1,			-1,			TYPE_BYTE,	0,	255,				1,	1,	&drive->bios_head,		NULL); | 
 | 871 | 	ide_add_setting(drive,	"bios_sect",		SETTING_RW,					-1,			-1,			TYPE_BYTE,	0,	63,				1,	1,	&drive->bios_sect,		NULL); | 
 | 872 | 	ide_add_setting(drive,	"address",		SETTING_RW,					HDIO_GET_ADDRESS,	HDIO_SET_ADDRESS,	TYPE_INTA,	0,	2,				1,	1,	&drive->addressing,	set_lba_addressing); | 
 | 873 | 	ide_add_setting(drive,	"bswap",		SETTING_READ,					-1,			-1,			TYPE_BYTE,	0,	1,				1,	1,	&drive->bswap,			NULL); | 
 | 874 | 	ide_add_setting(drive,	"multcount",		id ? SETTING_RW : SETTING_READ,			HDIO_GET_MULTCOUNT,	HDIO_SET_MULTCOUNT,	TYPE_BYTE,	0,	id ? id->max_multsect : 0,	1,	1,	&drive->mult_count,		set_multcount); | 
 | 875 | 	ide_add_setting(drive,	"nowerr",		SETTING_RW,					HDIO_GET_NOWERR,	HDIO_SET_NOWERR,	TYPE_BYTE,	0,	1,				1,	1,	&drive->nowerr,			set_nowerr); | 
 | 876 | 	ide_add_setting(drive,	"lun",			SETTING_RW,					-1,			-1,			TYPE_INT,	0,	7,				1,	1,	&drive->lun,			NULL); | 
 | 877 | 	ide_add_setting(drive,	"wcache",		SETTING_RW,					HDIO_GET_WCACHE,	HDIO_SET_WCACHE,	TYPE_BYTE,	0,	1,				1,	1,	&drive->wcache,			write_cache); | 
 | 878 | 	ide_add_setting(drive,	"acoustic",		SETTING_RW,					HDIO_GET_ACOUSTIC,	HDIO_SET_ACOUSTIC,	TYPE_BYTE,	0,	254,				1,	1,	&drive->acoustic,		set_acoustic); | 
 | 879 |  	ide_add_setting(drive,	"failures",		SETTING_RW,					-1,			-1,			TYPE_INT,	0,	65535,				1,	1,	&drive->failures,		NULL); | 
 | 880 |  	ide_add_setting(drive,	"max_failures",		SETTING_RW,					-1,			-1,			TYPE_INT,	0,	65535,				1,	1,	&drive->max_failures,		NULL); | 
 | 881 | } | 
 | 882 |  | 
 | 883 | static void idedisk_setup (ide_drive_t *drive) | 
 | 884 | { | 
 | 885 | 	struct hd_driveid *id = drive->id; | 
 | 886 | 	unsigned long long capacity; | 
 | 887 | 	int barrier; | 
 | 888 |  | 
 | 889 | 	idedisk_add_settings(drive); | 
 | 890 |  | 
 | 891 | 	if (drive->id_read == 0) | 
 | 892 | 		return; | 
 | 893 |  | 
 | 894 | 	/* | 
 | 895 | 	 * CompactFlash cards and their brethern look just like hard drives | 
 | 896 | 	 * to us, but they are removable and don't have a doorlock mechanism. | 
 | 897 | 	 */ | 
 | 898 | 	if (drive->removable && !(drive->is_flash)) { | 
 | 899 | 		/* | 
 | 900 | 		 * Removable disks (eg. SYQUEST); ignore 'WD' drives  | 
 | 901 | 		 */ | 
 | 902 | 		if (id->model[0] != 'W' || id->model[1] != 'D') { | 
 | 903 | 			drive->doorlocking = 1; | 
 | 904 | 		} | 
 | 905 | 	} | 
 | 906 |  | 
 | 907 | 	(void)set_lba_addressing(drive, 1); | 
 | 908 |  | 
 | 909 | 	if (drive->addressing == 1) { | 
 | 910 | 		ide_hwif_t *hwif = HWIF(drive); | 
 | 911 | 		int max_s = 2048; | 
 | 912 |  | 
 | 913 | 		if (max_s > hwif->rqsize) | 
 | 914 | 			max_s = hwif->rqsize; | 
 | 915 |  | 
 | 916 | 		blk_queue_max_sectors(drive->queue, max_s); | 
 | 917 | 	} | 
 | 918 |  | 
 | 919 | 	printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, drive->queue->max_sectors / 2); | 
 | 920 |  | 
 | 921 | 	/* calculate drive capacity, and select LBA if possible */ | 
 | 922 | 	init_idedisk_capacity (drive); | 
 | 923 |  | 
 | 924 | 	/* limit drive capacity to 137GB if LBA48 cannot be used */ | 
 | 925 | 	if (drive->addressing == 0 && drive->capacity64 > 1ULL << 28) { | 
 | 926 | 		printk(KERN_WARNING "%s: cannot use LBA48 - full capacity " | 
 | 927 | 		       "%llu sectors (%llu MB)\n", | 
 | 928 | 		       drive->name, (unsigned long long)drive->capacity64, | 
 | 929 | 		       sectors_to_MB(drive->capacity64)); | 
 | 930 | 		drive->capacity64 = 1ULL << 28; | 
 | 931 | 	} | 
 | 932 |  | 
 | 933 | 	if (drive->hwif->no_lba48_dma && drive->addressing) { | 
 | 934 | 		if (drive->capacity64 > 1ULL << 28) { | 
 | 935 | 			printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode will" | 
 | 936 | 					 " be used for accessing sectors > %u\n", | 
 | 937 | 					 drive->name, 1 << 28); | 
 | 938 | 		} else | 
 | 939 | 			drive->addressing = 0; | 
 | 940 | 	} | 
 | 941 |  | 
 | 942 | 	/* | 
 | 943 | 	 * if possible, give fdisk access to more of the drive, | 
 | 944 | 	 * by correcting bios_cyls: | 
 | 945 | 	 */ | 
 | 946 | 	capacity = idedisk_capacity (drive); | 
 | 947 | 	if (!drive->forced_geom) { | 
 | 948 |  | 
 | 949 | 		if (idedisk_supports_lba48(drive->id)) { | 
 | 950 | 			/* compatibility */ | 
 | 951 | 			drive->bios_sect = 63; | 
 | 952 | 			drive->bios_head = 255; | 
 | 953 | 		} | 
 | 954 |  | 
 | 955 | 		if (drive->bios_sect && drive->bios_head) { | 
 | 956 | 			unsigned int cap0 = capacity; /* truncate to 32 bits */ | 
 | 957 | 			unsigned int cylsz, cyl; | 
 | 958 |  | 
 | 959 | 			if (cap0 != capacity) | 
 | 960 | 				drive->bios_cyl = 65535; | 
 | 961 | 			else { | 
 | 962 | 				cylsz = drive->bios_sect * drive->bios_head; | 
 | 963 | 				cyl = cap0 / cylsz; | 
 | 964 | 				if (cyl > 65535) | 
 | 965 | 					cyl = 65535; | 
 | 966 | 				if (cyl > drive->bios_cyl) | 
 | 967 | 					drive->bios_cyl = cyl; | 
 | 968 | 			} | 
 | 969 | 		} | 
 | 970 | 	} | 
 | 971 | 	printk(KERN_INFO "%s: %llu sectors (%llu MB)", | 
 | 972 | 			 drive->name, capacity, sectors_to_MB(capacity)); | 
 | 973 |  | 
 | 974 | 	/* Only print cache size when it was specified */ | 
 | 975 | 	if (id->buf_size) | 
 | 976 | 		printk (" w/%dKiB Cache", id->buf_size/2); | 
 | 977 |  | 
 | 978 | 	printk(", CHS=%d/%d/%d",  | 
 | 979 | 	       drive->bios_cyl, drive->bios_head, drive->bios_sect); | 
 | 980 | 	if (drive->using_dma) | 
 | 981 | 		ide_dma_verbose(drive); | 
 | 982 | 	printk("\n"); | 
 | 983 |  | 
 | 984 | 	drive->no_io_32bit = id->dword_io ? 1 : 0; | 
 | 985 |  | 
 | 986 | 	/* write cache enabled? */ | 
 | 987 | 	if ((id->csfo & 1) || (id->cfs_enable_1 & (1 << 5))) | 
 | 988 | 		drive->wcache = 1; | 
 | 989 |  | 
 | 990 | 	write_cache(drive, 1); | 
 | 991 |  | 
 | 992 | 	/* | 
 | 993 | 	 * We must avoid issuing commands a drive does not understand | 
 | 994 | 	 * or we may crash it. We check flush cache is supported. We also | 
 | 995 | 	 * check we have the LBA48 flush cache if the drive capacity is | 
 | 996 | 	 * too large. By this time we have trimmed the drive capacity if | 
 | 997 | 	 * LBA48 is not available so we don't need to recheck that. | 
 | 998 | 	 */ | 
 | 999 | 	barrier = 0; | 
 | 1000 | 	if (ide_id_has_flush_cache(id)) | 
 | 1001 | 		barrier = 1; | 
 | 1002 | 	if (drive->addressing == 1) { | 
 | 1003 | 		/* Can't issue the correct flush ? */ | 
 | 1004 | 		if (capacity > (1ULL << 28) && !ide_id_has_flush_cache_ext(id)) | 
 | 1005 | 			barrier = 0; | 
 | 1006 | 	} | 
 | 1007 |  | 
 | 1008 | 	printk(KERN_INFO "%s: cache flushes %ssupported\n", | 
 | 1009 | 		drive->name, barrier ? "" : "not "); | 
 | 1010 | 	if (barrier) { | 
 | 1011 | 		blk_queue_ordered(drive->queue, QUEUE_ORDERED_FLUSH); | 
 | 1012 | 		drive->queue->prepare_flush_fn = idedisk_prepare_flush; | 
 | 1013 | 		drive->queue->end_flush_fn = idedisk_end_flush; | 
 | 1014 | 		blk_queue_issue_flush_fn(drive->queue, idedisk_issue_flush); | 
 | 1015 | 	} | 
 | 1016 | } | 
 | 1017 |  | 
 | 1018 | static void ide_cacheflush_p(ide_drive_t *drive) | 
 | 1019 | { | 
 | 1020 | 	if (!drive->wcache || !ide_id_has_flush_cache(drive->id)) | 
 | 1021 | 		return; | 
 | 1022 |  | 
 | 1023 | 	if (do_idedisk_flushcache(drive)) | 
 | 1024 | 		printk(KERN_INFO "%s: wcache flush failed!\n", drive->name); | 
 | 1025 | } | 
 | 1026 |  | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1027 | static int ide_disk_remove(struct device *dev) | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1028 | { | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1029 | 	ide_drive_t *drive = to_ide_device(dev); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1030 | 	struct ide_disk_obj *idkp = drive->driver_data; | 
 | 1031 | 	struct gendisk *g = idkp->disk; | 
 | 1032 |  | 
 | 1033 | 	ide_cacheflush_p(drive); | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1034 |  | 
 | 1035 | 	ide_unregister_subdriver(drive, idkp->driver); | 
 | 1036 |  | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1037 | 	del_gendisk(g); | 
 | 1038 |  | 
 | 1039 | 	ide_disk_put(idkp); | 
 | 1040 |  | 
 | 1041 | 	return 0; | 
 | 1042 | } | 
 | 1043 |  | 
 | 1044 | static void ide_disk_release(struct kref *kref) | 
 | 1045 | { | 
 | 1046 | 	struct ide_disk_obj *idkp = to_ide_disk(kref); | 
 | 1047 | 	ide_drive_t *drive = idkp->drive; | 
 | 1048 | 	struct gendisk *g = idkp->disk; | 
 | 1049 |  | 
 | 1050 | 	drive->driver_data = NULL; | 
 | 1051 | 	drive->devfs_name[0] = '\0'; | 
 | 1052 | 	g->private_data = NULL; | 
 | 1053 | 	put_disk(g); | 
 | 1054 | 	kfree(idkp); | 
 | 1055 | } | 
 | 1056 |  | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1057 | static int ide_disk_probe(struct device *dev); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1058 |  | 
 | 1059 | static void ide_device_shutdown(struct device *dev) | 
 | 1060 | { | 
 | 1061 | 	ide_drive_t *drive = container_of(dev, ide_drive_t, gendev); | 
 | 1062 |  | 
 | 1063 | #ifdef	CONFIG_ALPHA | 
 | 1064 | 	/* On Alpha, halt(8) doesn't actually turn the machine off, | 
 | 1065 | 	   it puts you into the sort of firmware monitor. Typically, | 
 | 1066 | 	   it's used to boot another kernel image, so it's not much | 
 | 1067 | 	   different from reboot(8). Therefore, we don't need to | 
 | 1068 | 	   spin down the disk in this case, especially since Alpha | 
 | 1069 | 	   firmware doesn't handle disks in standby mode properly. | 
 | 1070 | 	   On the other hand, it's reasonably safe to turn the power | 
 | 1071 | 	   off when the shutdown process reaches the firmware prompt, | 
 | 1072 | 	   as the firmware initialization takes rather long time - | 
 | 1073 | 	   at least 10 seconds, which should be sufficient for | 
 | 1074 | 	   the disk to expire its write cache. */ | 
 | 1075 | 	if (system_state != SYSTEM_POWER_OFF) { | 
 | 1076 | #else | 
 | 1077 | 	if (system_state == SYSTEM_RESTART) { | 
 | 1078 | #endif | 
 | 1079 | 		ide_cacheflush_p(drive); | 
 | 1080 | 		return; | 
 | 1081 | 	} | 
 | 1082 |  | 
 | 1083 | 	printk("Shutdown: %s\n", drive->name); | 
 | 1084 | 	dev->bus->suspend(dev, PMSG_SUSPEND); | 
 | 1085 | } | 
 | 1086 |  | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1087 | static ide_driver_t idedisk_driver = { | 
 | 1088 | 	.owner			= THIS_MODULE, | 
 | 1089 | 	.gen_driver = { | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1090 | 		.name		= "ide-disk", | 
 | 1091 | 		.bus		= &ide_bus_type, | 
 | 1092 | 		.probe		= ide_disk_probe, | 
 | 1093 | 		.remove		= ide_disk_remove, | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1094 | 		.shutdown	= ide_device_shutdown, | 
 | 1095 | 	}, | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1096 | 	.version		= IDEDISK_VERSION, | 
 | 1097 | 	.media			= ide_disk, | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1098 | 	.supports_dsc_overlap	= 0, | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1099 | 	.do_request		= ide_do_rw_disk, | 
 | 1100 | 	.end_request		= ide_end_request, | 
 | 1101 | 	.error			= __ide_error, | 
 | 1102 | 	.abort			= __ide_abort, | 
 | 1103 | 	.proc			= idedisk_proc, | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1104 | }; | 
 | 1105 |  | 
 | 1106 | static int idedisk_open(struct inode *inode, struct file *filp) | 
 | 1107 | { | 
 | 1108 | 	struct gendisk *disk = inode->i_bdev->bd_disk; | 
 | 1109 | 	struct ide_disk_obj *idkp; | 
 | 1110 | 	ide_drive_t *drive; | 
 | 1111 |  | 
 | 1112 | 	if (!(idkp = ide_disk_get(disk))) | 
 | 1113 | 		return -ENXIO; | 
 | 1114 |  | 
 | 1115 | 	drive = idkp->drive; | 
 | 1116 |  | 
 | 1117 | 	drive->usage++; | 
 | 1118 | 	if (drive->removable && drive->usage == 1) { | 
 | 1119 | 		ide_task_t args; | 
 | 1120 | 		memset(&args, 0, sizeof(ide_task_t)); | 
 | 1121 | 		args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORLOCK; | 
 | 1122 | 		args.command_type = IDE_DRIVE_TASK_NO_DATA; | 
 | 1123 | 		args.handler	  = &task_no_data_intr; | 
 | 1124 | 		check_disk_change(inode->i_bdev); | 
 | 1125 | 		/* | 
 | 1126 | 		 * Ignore the return code from door_lock, | 
 | 1127 | 		 * since the open() has already succeeded, | 
 | 1128 | 		 * and the door_lock is irrelevant at this point. | 
 | 1129 | 		 */ | 
 | 1130 | 		if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL)) | 
 | 1131 | 			drive->doorlocking = 0; | 
 | 1132 | 	} | 
 | 1133 | 	return 0; | 
 | 1134 | } | 
 | 1135 |  | 
 | 1136 | static int idedisk_release(struct inode *inode, struct file *filp) | 
 | 1137 | { | 
 | 1138 | 	struct gendisk *disk = inode->i_bdev->bd_disk; | 
 | 1139 | 	struct ide_disk_obj *idkp = ide_disk_g(disk); | 
 | 1140 | 	ide_drive_t *drive = idkp->drive; | 
 | 1141 |  | 
 | 1142 | 	if (drive->usage == 1) | 
 | 1143 | 		ide_cacheflush_p(drive); | 
 | 1144 | 	if (drive->removable && drive->usage == 1) { | 
 | 1145 | 		ide_task_t args; | 
 | 1146 | 		memset(&args, 0, sizeof(ide_task_t)); | 
 | 1147 | 		args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORUNLOCK; | 
 | 1148 | 		args.command_type = IDE_DRIVE_TASK_NO_DATA; | 
 | 1149 | 		args.handler	  = &task_no_data_intr; | 
 | 1150 | 		if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL)) | 
 | 1151 | 			drive->doorlocking = 0; | 
 | 1152 | 	} | 
 | 1153 | 	drive->usage--; | 
 | 1154 |  | 
 | 1155 | 	ide_disk_put(idkp); | 
 | 1156 |  | 
 | 1157 | 	return 0; | 
 | 1158 | } | 
 | 1159 |  | 
 | 1160 | static int idedisk_ioctl(struct inode *inode, struct file *file, | 
 | 1161 | 			unsigned int cmd, unsigned long arg) | 
 | 1162 | { | 
 | 1163 | 	struct block_device *bdev = inode->i_bdev; | 
 | 1164 | 	struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk); | 
 | 1165 | 	return generic_ide_ioctl(idkp->drive, file, bdev, cmd, arg); | 
 | 1166 | } | 
 | 1167 |  | 
 | 1168 | static int idedisk_media_changed(struct gendisk *disk) | 
 | 1169 | { | 
 | 1170 | 	struct ide_disk_obj *idkp = ide_disk_g(disk); | 
 | 1171 | 	ide_drive_t *drive = idkp->drive; | 
 | 1172 |  | 
 | 1173 | 	/* do not scan partitions twice if this is a removable device */ | 
 | 1174 | 	if (drive->attach) { | 
 | 1175 | 		drive->attach = 0; | 
 | 1176 | 		return 0; | 
 | 1177 | 	} | 
 | 1178 | 	/* if removable, always assume it was changed */ | 
 | 1179 | 	return drive->removable; | 
 | 1180 | } | 
 | 1181 |  | 
 | 1182 | static int idedisk_revalidate_disk(struct gendisk *disk) | 
 | 1183 | { | 
 | 1184 | 	struct ide_disk_obj *idkp = ide_disk_g(disk); | 
 | 1185 | 	set_capacity(disk, idedisk_capacity(idkp->drive)); | 
 | 1186 | 	return 0; | 
 | 1187 | } | 
 | 1188 |  | 
 | 1189 | static struct block_device_operations idedisk_ops = { | 
 | 1190 | 	.owner		= THIS_MODULE, | 
 | 1191 | 	.open		= idedisk_open, | 
 | 1192 | 	.release	= idedisk_release, | 
 | 1193 | 	.ioctl		= idedisk_ioctl, | 
 | 1194 | 	.media_changed	= idedisk_media_changed, | 
 | 1195 | 	.revalidate_disk= idedisk_revalidate_disk | 
 | 1196 | }; | 
 | 1197 |  | 
 | 1198 | MODULE_DESCRIPTION("ATA DISK Driver"); | 
 | 1199 |  | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1200 | static int ide_disk_probe(struct device *dev) | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1201 | { | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1202 | 	ide_drive_t *drive = to_ide_device(dev); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1203 | 	struct ide_disk_obj *idkp; | 
 | 1204 | 	struct gendisk *g; | 
 | 1205 |  | 
 | 1206 | 	/* strstr("foo", "") is non-NULL */ | 
 | 1207 | 	if (!strstr("ide-disk", drive->driver_req)) | 
 | 1208 | 		goto failed; | 
 | 1209 | 	if (!drive->present) | 
 | 1210 | 		goto failed; | 
 | 1211 | 	if (drive->media != ide_disk) | 
 | 1212 | 		goto failed; | 
 | 1213 |  | 
 | 1214 | 	idkp = kmalloc(sizeof(*idkp), GFP_KERNEL); | 
 | 1215 | 	if (!idkp) | 
 | 1216 | 		goto failed; | 
 | 1217 |  | 
 | 1218 | 	g = alloc_disk(1 << PARTN_BITS); | 
 | 1219 | 	if (!g) | 
 | 1220 | 		goto out_free_idkp; | 
 | 1221 |  | 
 | 1222 | 	ide_init_disk(g, drive); | 
 | 1223 |  | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1224 | 	ide_register_subdriver(drive, &idedisk_driver); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1225 |  | 
 | 1226 | 	memset(idkp, 0, sizeof(*idkp)); | 
 | 1227 |  | 
 | 1228 | 	kref_init(&idkp->kref); | 
 | 1229 |  | 
 | 1230 | 	idkp->drive = drive; | 
 | 1231 | 	idkp->driver = &idedisk_driver; | 
 | 1232 | 	idkp->disk = g; | 
 | 1233 |  | 
 | 1234 | 	g->private_data = &idkp->driver; | 
 | 1235 |  | 
 | 1236 | 	drive->driver_data = idkp; | 
 | 1237 |  | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1238 | 	idedisk_setup(drive); | 
 | 1239 | 	if ((!drive->head || drive->head > 16) && !drive->select.b.lba) { | 
 | 1240 | 		printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n", | 
 | 1241 | 			drive->name, drive->head); | 
 | 1242 | 		drive->attach = 0; | 
 | 1243 | 	} else | 
 | 1244 | 		drive->attach = 1; | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1245 |  | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1246 | 	g->minors = 1 << PARTN_BITS; | 
 | 1247 | 	strcpy(g->devfs_name, drive->devfs_name); | 
 | 1248 | 	g->driverfs_dev = &drive->gendev; | 
 | 1249 | 	g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0; | 
 | 1250 | 	set_capacity(g, idedisk_capacity(drive)); | 
 | 1251 | 	g->fops = &idedisk_ops; | 
 | 1252 | 	add_disk(g); | 
 | 1253 | 	return 0; | 
 | 1254 |  | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1255 | out_free_idkp: | 
 | 1256 | 	kfree(idkp); | 
 | 1257 | failed: | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1258 | 	return -ENODEV; | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1259 | } | 
 | 1260 |  | 
 | 1261 | static void __exit idedisk_exit (void) | 
 | 1262 | { | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1263 | 	driver_unregister(&idedisk_driver.gen_driver); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1264 | } | 
 | 1265 |  | 
 | 1266 | static int idedisk_init (void) | 
 | 1267 | { | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1268 | 	return driver_register(&idedisk_driver.gen_driver); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1269 | } | 
 | 1270 |  | 
 | 1271 | module_init(idedisk_init); | 
 | 1272 | module_exit(idedisk_exit); | 
 | 1273 | MODULE_LICENSE("GPL"); |