Gitiles
Code Review Sign In
review.evervolv.com / android_kernel_htc_msm8960 / 705ff4767e50f38c32775f97cf2fa8d4067bd01a / . / arch / arm / mach-msm / Kconfig
blob: f2c4724bf9c52b08759f9c31306a1d667e83adcd [file] [log] [blame]
Brian Swetland1637de02008-09-09 07:13:33 -0700[diff] [blame]1if ARCH_MSM
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2
Stepan Moskovchenko1cd286f2011-08-03 19:03:02 -0700[diff] [blame]3menu "MSM SoC Type"
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]4
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]5config ARCH_MSM7X01A
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]6 bool "MSM7x00A / MSM7x01A"
7 select ARCH_MSM_ARM11
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]8 select MSM_VIC
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]9 select CPU_V6
David Brown74d10d72011-05-16 13:57:39 -0700[diff] [blame]10 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]11 select MSM_REMOTE_SPINLOCK_SWP
12
13config ARCH_MSM7X25
14 bool "MSM7x25"
15 select ARCH_MSM_ARM11
16 select MSM_VIC
17 select CPU_V6
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]18 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]19 select MSM_REMOTE_SPINLOCK_SWP
Taniya Dasbe561a02011-10-12 09:53:11 +0530[diff] [blame]20 select MULTI_IRQ_HANDLER
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]21
22config ARCH_MSM7X27
23 bool "MSM7x27"
24 select ARCH_MSM_ARM11 if MSM_SOC_REV_NONE
25 select ARCH_HAS_BARRIERS if MSM_SOC_REV_NONE
26 select ARCH_MSM_CORTEX_A5 if MSM_SOC_REV_A
27 select MSM_VIC
28 select CPU_V6 if MSM_SOC_REV_NONE
29 select CPU_V7 if MSM_SOC_REV_A
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]30 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]31 select MSM_REMOTE_SPINLOCK_SWP if MSM_SOC_REV_NONE
32 select MSM_GPIOMUX
33 select REGULATOR
Taniya Dasbe561a02011-10-12 09:53:11 +0530[diff] [blame]34 select MULTI_IRQ_HANDLER
Pankaj Kumar75c86fd2011-10-01 18:51:09 +0530[diff] [blame]35 select MSM_PROC_COMM_REGULATOR
Laura Abbott1fbd2e62011-12-18 10:26:46 -0800[diff] [blame]36 select CLEANCACHE
37 select QCACHE
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]38 select MSM_PM2 if PM
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]39 select MSM_RUN_QUEUE_STATS if MSM_SOC_REV_A
Taniya Dasd4c39f92012-05-14 17:41:49 +0530[diff] [blame]40 select DONT_MAP_HOLE_AFTER_MEMBANK0
Trilok Sonib856ab92012-06-26 14:33:28 +0530[diff] [blame]41 select MIGHT_HAVE_CACHE_L2X0
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]42 select MSM_MODEM_RESTART
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]43
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]44config ARCH_MSM7X30
45 bool "MSM7x30"
46 select ARCH_MSM_SCORPION
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]47 select MSM_VIC
48 select CPU_V7
David Brown74d10d72011-05-16 13:57:39 -0700[diff] [blame]49 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]50 select MSM_REMOTE_SPINLOCK_DEKKERS
51 select ARCH_SPARSEMEM_ENABLE
Laura Abbott78593b52011-09-26 18:48:14 -0700[diff] [blame]52 select ARCH_HAS_HOLES_MEMORYMODEL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]53 select MEMORY_HOTPLUG
54 select MEMORY_HOTREMOVE
Bryan Huntsmanea439642011-11-23 12:34:05 -0800[diff] [blame]55 select ARCH_ENABLE_MEMORY_HOTPLUG
56 select ARCH_ENABLE_MEMORY_HOTREMOVE
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]57 select MIGRATION
58 select ARCH_MEMORY_PROBE
59 select ARCH_MEMORY_REMOVE
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]60 select MSM_GPIOMUX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]61 select RESERVE_FIRST_PAGE
62 select MSM_DALRPC
63 select MSM_SPM_V1
64 select REGULATOR
Justin Paupore637a25d2011-07-14 17:11:04 -0700[diff] [blame]65 select MSM_PROC_COMM_REGULATOR
Taniya Dasbae99fb2011-10-12 09:55:13 +0530[diff] [blame]66 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]67 select MSM_PM2 if PM
Chintan Pandyabb021762012-06-21 15:03:29 +0530[diff] [blame]68 select HOLES_IN_ZONE if SPARSEMEM
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]69 select MSM_MODEM_RESTART
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]70
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]71config ARCH_QSD8X50
72 bool "QSD8X50"
73 select ARCH_MSM_SCORPION
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]74 select MSM_VIC
75 select CPU_V7
David Brown74d10d72011-05-16 13:57:39 -0700[diff] [blame]76 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]77 select MSM_REMOTE_SPINLOCK_LDREX
78 select CPU_USE_DOMAINS
79 select EMULATE_DOMAIN_MANAGER_V7
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]80 select MSM_GPIOMUX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]81 select MSM_DALRPC
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]82 select MSM_PM2 if PM
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]83 select MSM_MODEM_RESTART
Daniel Walker46fe5f22010-08-18 11:00:25 -0700[diff] [blame]84
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]85config ARCH_MSM8X60
86 bool "MSM8X60"
Jeff Ohlsteine14411d2010-11-30 13:06:36 -0800[diff] [blame]87 select ARCH_MSM_SCORPIONMP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]88 select SMP_PARALLEL_START if SMP
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]89 select ARM_GIC
90 select CPU_V7
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]91 select MSM_REMOTE_SPINLOCK_LDREX
92 select ARCH_REQUIRE_GPIOLIB
93 select MSM_ADM3
94 select REGULATOR
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]95 select MSM_RPM_REGULATOR
David Brown1a5ab4b2011-05-16 15:53:38 -0700[diff] [blame]96 select GPIO_MSM_V2
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]97 select MSM_PIL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]98 select ARCH_HAS_CPU_IDLE_WAIT
99 select MSM_DIRECT_SCLK_ACCESS
100 select MSM_RPM
101 select MSM_XO
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]102 select MSM_GPIOMUX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]103 select MSM_BUS_SCALING
104 select MSM_SECURE_IO
105 select MSM_DALRPC
106 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]107 select MSM_QDSP6_CODECS
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]108 select MSM_NATIVE_RESTART
109 select ARCH_INLINE_SPIN_TRYLOCK
110 select ARCH_INLINE_SPIN_TRYLOCK_BH
111 select ARCH_INLINE_SPIN_LOCK
112 select ARCH_INLINE_SPIN_LOCK_BH
113 select ARCH_INLINE_SPIN_LOCK_IRQ
114 select ARCH_INLINE_SPIN_LOCK_IRQSAVE
115 select ARCH_INLINE_SPIN_UNLOCK
116 select ARCH_INLINE_SPIN_UNLOCK_BH
117 select ARCH_INLINE_SPIN_UNLOCK_IRQ
118 select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
119 select ARCH_INLINE_READ_TRYLOCK
120 select ARCH_INLINE_READ_LOCK
121 select ARCH_INLINE_READ_LOCK_BH
122 select ARCH_INLINE_READ_LOCK_IRQ
123 select ARCH_INLINE_READ_LOCK_IRQSAVE
124 select ARCH_INLINE_READ_UNLOCK
125 select ARCH_INLINE_READ_UNLOCK_BH
126 select ARCH_INLINE_READ_UNLOCK_IRQ
127 select ARCH_INLINE_READ_UNLOCK_IRQRESTORE
128 select ARCH_INLINE_WRITE_TRYLOCK
129 select ARCH_INLINE_WRITE_LOCK
130 select ARCH_INLINE_WRITE_LOCK_BH
131 select ARCH_INLINE_WRITE_LOCK_IRQ
132 select ARCH_INLINE_WRITE_LOCK_IRQSAVE
133 select ARCH_INLINE_WRITE_UNLOCK
134 select ARCH_INLINE_WRITE_UNLOCK_BH
135 select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
136 select CPU_HAS_L2_PMU
137 select MSM_SPM_V1
Stephen Boyd2a1eb582010-08-27 10:01:23 -0700[diff] [blame]138 select MSM_SCM if SMP
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]139 select MULTI_IRQ_HANDLER
Laura Abbott46505f62011-11-02 18:06:55 -0700[diff] [blame]140 select MSM_MULTIMEDIA_USE_ION
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]141 select MSM_PM8X60 if PM
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]142 select MSM_RUN_QUEUE_STATS
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]143 select ARM_HAS_SG_CHAIN
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]144
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]145config ARCH_MSM8960
146 bool "MSM8960"
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]147 select ARCH_MSM_KRAITMP
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]148 select ARM_GIC
149 select CPU_V7
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]150 select GPIO_MSM_V2
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]151 select MSM_GPIOMUX
152 select MSM_SCM if SMP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]153 select MSM_DIRECT_SCLK_ACCESS
154 select REGULATOR
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]155 select MSM_RPM_REGULATOR
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]156 select MSM_RPM
157 select MSM_XO
158 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]159 select MSM_QDSP6_CODECS
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]160 select MSM_PIL
161 select MSM_AUDIO_QDSP6 if SND_SOC
162 select CPU_HAS_L2_PMU
163 select MSM_SPM_V2
164 select MSM_L2_SPM
165 select MSM_NATIVE_RESTART
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]166 select DONT_MAP_HOLE_AFTER_MEMBANK0
167 select MSM_REMOTE_SPINLOCK_SFPB
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]168 select ARCH_SPARSEMEM_ENABLE
169 select ARCH_HAS_HOLES_MEMORYMODEL
Larry Basseld4d82c92011-12-07 09:52:49 -0800[diff] [blame]170 select CLEANCACHE
171 select QCACHE
Laura Abbott6d61a912011-10-27 16:44:14 -0700[diff] [blame]172 select MSM_MULTIMEDIA_USE_ION
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]173 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]174 select MSM_PM8X60 if PM
Laura Abbott085dd202012-03-30 14:02:34 -0700[diff] [blame]175 select HOLES_IN_ZONE if SPARSEMEM
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]176 select MSM_RUN_QUEUE_STATS
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]177 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]178 select MSM_KRAIT_WFE_FIXUP
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]179
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]180config ARCH_MSM8930
181 bool "MSM8930"
182 select ARCH_MSM_KRAITMP
183 select ARM_GIC
184 select CPU_V7
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]185 select GPIO_MSM_V2
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]186 select MSM_GPIOMUX
187 select MSM_SCM if SMP
188 select MSM_DIRECT_SCLK_ACCESS
189 select REGULATOR
David Collins5779cea2012-01-05 15:09:21 -0800[diff] [blame]190 select MSM_RPM_REGULATOR
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]191 select MSM_RPM
192 select MSM_XO
193 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]194 select MSM_QDSP6_CODECS
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]195 select MSM_PIL
196 select MSM_AUDIO_QDSP6 if SND_SOC
197 select CPU_HAS_L2_PMU
198 select MSM_SPM_V2
199 select MSM_L2_SPM
200 select MSM_NATIVE_RESTART
201 select DONT_MAP_HOLE_AFTER_MEMBANK0
Eric Holmbergeab10732011-09-23 19:44:43 -0600[diff] [blame]202 select MSM_REMOTE_SPINLOCK_SFPB
Larry Basself74479e2011-09-08 11:07:52 -0700[diff] [blame]203 select ARCH_SPARSEMEM_ENABLE
204 select ARCH_HAS_HOLES_MEMORYMODEL
Baruch Eruchimovitche9cbfc12011-10-09 19:47:08 +0200[diff] [blame]205 select MSM_ULTRASOUND
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]206 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]207 select MSM_PM8X60 if PM
Laura Abbott085dd202012-03-30 14:02:34 -0700[diff] [blame]208 select HOLES_IN_ZONE if SPARSEMEM
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]209 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]210 select MSM_KRAIT_WFE_FIXUP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]211
212config ARCH_APQ8064
213 bool "APQ8064"
214 select ARCH_MSM_KRAITMP
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]215 select GPIO_MSM_V2
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]216 select ARM_GIC
217 select CPU_V7
218 select MSM_SCM if SMP
Joel King4ebccc62011-07-22 09:43:22 -0700[diff] [blame]219 select MSM_GPIOMUX
Eric Holmberg40d21882011-09-27 09:42:03 -0600[diff] [blame]220 select MSM_REMOTE_SPINLOCK_SFPB
Swaminathan Sathappan47e5d932011-12-05 14:48:07 -0800[diff] [blame]221 select MSM_PIL
Swaminathan Sathappan2f51a752011-12-05 12:51:19 -0800[diff] [blame]222 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]223 select MSM_QDSP6_CODECS
Swaminathan Sathappan2f51a752011-12-05 12:51:19 -0800[diff] [blame]224 select MSM_AUDIO_QDSP6 if SND_SOC
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]225 select MULTI_IRQ_HANDLER
Praveen Chidambaram78499012011-11-01 17:15:17 -0600[diff] [blame]226 select MSM_RPM
227 select MSM_SPM_V2
228 select MSM_L2_SPM
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]229 select MSM_PM8X60 if PM
Neil Leeder814d3d32012-01-19 17:21:43 -0500[diff] [blame]230 select CPU_HAS_L2_PMU
Laura Abbott085dd202012-03-30 14:02:34 -0700[diff] [blame]231 select HOLES_IN_ZONE if SPARSEMEM
Larry Bassel67b921d2012-04-06 10:23:27 -0700[diff] [blame]232 select CLEANCACHE
233 select QCACHE
Niranjana Vishwanathapuraf1427ac2012-05-03 14:28:21 -0600[diff] [blame]234 select MIGHT_HAVE_PCI
235 select ARCH_SUPPORTS_MSI
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]236 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]237 select MSM_KRAIT_WFE_FIXUP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]238
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]239config ARCH_MSM8974
240 bool "MSM8974"
Sathish Ambleyd4efc762011-10-09 22:19:22 -0700[diff] [blame]241 select ARCH_MSM_KRAITMP
Sathish Ambley4149e842012-03-23 11:53:55 -0700[diff] [blame]242 select GPIO_MSM_V3
Sathish Ambleyd4efc762011-10-09 22:19:22 -0700[diff] [blame]243 select ARM_GIC
244 select CPU_V7
245 select MSM_SCM if SMP
246 select MSM_GPIOMUX
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]247 select MULTI_IRQ_HANDLER
Olav Hauganb800c8c2012-01-30 08:50:45 -0800[diff] [blame]248 select MSM_MULTIMEDIA_USE_ION
Matt Wagantallc2bbdc32012-03-21 19:44:50 -0700[diff] [blame]249 select MSM_PIL
Praveen Chidambaramaa9d52b2012-04-02 11:09:47 -0600[diff] [blame]250 select MSM_SPM_V2
251 select MSM_L2_SPM
Praveen Chidambaram85b7b282012-04-16 13:45:15 -0600[diff] [blame]252 select MSM_PM8X60 if PM
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]253 select MAY_HAVE_SPARSE_IRQ
254 select SPARSE_IRQ
Mahesh Sivasubramaniancb668712012-04-04 13:03:25 -0600[diff] [blame]255 select MSM_RPM_SMD
David Collinsc7642322012-04-04 10:19:12 -0700[diff] [blame]256 select REGULATOR
Joonwoo Park91d95462012-08-02 10:55:54 -0700[diff] [blame]257 select MSM_QDSP6_APRV2
Harmandeep Singhe5ddfe32012-05-26 09:39:25 -0700[diff] [blame]258 select MSM_QDSP6V2_CODECS
259 select MSM_AUDIO_QDSP6V2 if SND_SOC
David Collins1c91ea72012-05-03 16:17:35 -0700[diff] [blame]260 select MSM_RPM_REGULATOR_SMD
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]261 select ARM_HAS_SG_CHAIN
Karthik Parsha404fb8f2012-07-30 19:14:05 -0700[diff] [blame]262 select MSM_RUN_QUEUE_STATS
Sathish Ambleyd4efc762011-10-09 22:19:22 -0700[diff] [blame]263
Syed Rameez Mustafa2af59732012-08-23 17:27:24 -0700[diff] [blame]264config ARCH_MPQ8092
265 bool "MPQ8092"
266 select ARCH_MSM_KRAITMP
267 select GPIO_MSM_V3
268 select ARM_GIC
269 select MULTI_IRQ_HANDLER
270 select CPU_V7
271 select MSM_GPIOMUX
272 select MAY_HAVE_SPARSE_IRQ
273 select SPARSE_IRQ
274 select MSM_NOPM
275
276config ARCH_MSM8226
277 bool "MSM8226"
278 select ARCH_MSM_KRAITMP
279 select GPIO_MSM_V3
280 select ARM_GIC
281 select CPU_V7
282 select MSM_SCM if SMP
283 select MSM_GPIOMUX
284 select MULTI_IRQ_HANDLER
285 select MSM_MULTIMEDIA_USE_ION
286 select MSM_PIL
287 select MSM_SPM_V2
288 select MSM_L2_SPM
289 select MSM_PM8X60 if PM
290 select MAY_HAVE_SPARSE_IRQ
291 select SPARSE_IRQ
292 select MSM_RPM_SMD
293 select REGULATOR
294 select MSM_QDSP6_APRV2
295 select MSM_QDSP6V2_CODECS
296 select MSM_AUDIO_QDSP6V2 if SND_SOC
297 select MSM_RPM_REGULATOR_SMD
298 select ARM_HAS_SG_CHAIN
299
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]300config ARCH_FSM9XXX
301 bool "FSM9XXX"
302 select ARCH_MSM_SCORPION
303 select MSM_VIC
304 select CPU_V7
305 select MSM_REMOTE_SPINLOCK_LDREX
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]306 select GPIO_FSM9XXX
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]307 select MULTI_IRQ_HANDLER
Bryan Huntsman18b3c0c2011-11-23 15:12:58 -0800[diff] [blame]308 select MSM_DALRPC
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]309
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]310config ARCH_MSM9615
311 bool "MSM9615"
312 select ARM_GIC
Taniya Dasb241bd82012-03-19 17:58:06 +0530[diff] [blame]313 select GIC_SECURE
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]314 select ARCH_MSM_CORTEX_A5
315 select CPU_V7
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]316 select GPIO_MSM_V2
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]317 select MSM_GPIOMUX
Praveen Chidambaramab3b1c42011-08-25 08:44:05 -0600[diff] [blame]318 select MSM_RPM
Maheshkumar Sivasubramanian738b4582011-09-06 17:26:24 -0600[diff] [blame]319 select MSM_SPM_V2
Rohit Vaswanif688fa62011-10-13 18:13:10 -0700[diff] [blame]320 select MSM_NATIVE_RESTART
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]321 select REGULATOR
322 select MSM_RPM_REGULATOR
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]323 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]324 select MSM_PM8X60 if PM
Vikram Mulukutla2021c002011-12-16 12:32:59 -0800[diff] [blame]325 select MSM_XO
Olav Haugane6a0acd2012-04-05 09:29:12 -0700[diff] [blame]326 select MSM_MULTIMEDIA_USE_ION
Shiv Maliyappanahalli9ec55e92012-01-09 14:44:59 -0800[diff] [blame]327 select MSM_QDSP6_APR
328 select MSM_AUDIO_QDSP6 if SND_SOC
Rohit Vaswaniead426f2012-01-05 20:24:52 -0800[diff] [blame]329 select FIQ
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]330 select ARM_HAS_SG_CHAIN
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]331
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]332config ARCH_MSM8625
333 bool "MSM8625"
334 select ARCH_MSM_CORTEX_A5
335 select CPU_V7
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]336 select GPIO_MSM_V1
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]337 select MSM_GPIOMUX
338 select ARM_GIC
339 select ARCH_MSM_CORTEXMP
340 select MULTI_IRQ_HANDLER
Trilok Soni3a453992012-03-06 18:46:22 +0530[diff] [blame]341 select ARM_TICKET_LOCKS
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]342 select MSM_RUN_QUEUE_STATS
Trilok Sonib856ab92012-06-26 14:33:28 +0530[diff] [blame]343 select MIGHT_HAVE_CACHE_L2X0
Chintan Pandya9b2fbf02012-08-30 19:39:59 +0530[diff] [blame]344 select ARM_HAS_SG_CHAIN
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]345
346config ARCH_MSM9625
347 bool "MSM9625"
348 select ARM_GIC
349 select GIC_SECURE
Abhimanyu Kapur490d20c2012-06-22 17:34:20 -0700[diff] [blame]350 select MIGHT_HAVE_CACHE_L2X0
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]351 select ARCH_MSM_CORTEX_A5
352 select SMP
353 select MSM_SMP
354 select CPU_V7
Jin Hong690e3352012-05-02 09:25:05 -0700[diff] [blame]355 select MSM_GPIOMUX
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]356 select MULTI_IRQ_HANDLER
Rohit Vaswani61cf6ef2012-07-27 13:51:48 -0700[diff] [blame]357 select GPIO_MSM_V3
Stepan Moskovchenko1cd286f2011-08-03 19:03:02 -0700[diff] [blame]358endmenu
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]359
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]360choice
361 prompt "MSM SoC Revision"
362 default MSM_SOC_REV_NONE
363config MSM_SOC_REV_NONE
364 bool "N/A"
365 select EMULATE_DOMAIN_MANAGER_V7 if ARCH_QSD8X50
366 select VERIFY_PERMISSION_FAULT if ARCH_QSD8X50
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]367config MSM_SOC_REV_A
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]368 bool "Rev. A"
369 select ARCH_MSM7X27A if ARCH_MSM7X27
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]370endchoice
371
Stepan Moskovchenko00da0742011-07-08 14:06:44 -0700[diff] [blame]372config MSM_KRAIT_TBB_ABORT_HANDLER
373 bool "Krait TBB/TBH data abort handler"
374 depends on ARCH_MSM_KRAIT
375 depends on ARM_THUMB
376 help
377 Certain early samples of the Krait processor may generate data
378 aborts for TBB / TBH instructions that fail their condition code
379 checks. Enabling this option will ignore these erroneous data aborts,
380 at the expense of a very small performance penalty.
Stephen Boyda3d3ef92011-11-08 10:33:04 -0800[diff] [blame]381
Stepan Moskovchenko00da0742011-07-08 14:06:44 -0700[diff] [blame]382 If unsure, say N.
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]383
384config ARCH_MSM_ARM11
385 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]386
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]387config ARCH_MSM_SCORPION
388 bool
389
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]390config ARCH_MSM_KRAIT
Daniel Walker46fe5f22010-08-18 11:00:25 -0700[diff] [blame]391 bool
Stephen Boyd51cabbe2011-12-02 13:28:56 -0800[diff] [blame]392 select ARM_L1_CACHE_SHIFT_6
Daniel Walker46fe5f22010-08-18 11:00:25 -0700[diff] [blame]393
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]394config MSM_SMP
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]395 select HAVE_SMP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]396 bool
397
398config ARCH_MSM_SCORPIONMP
399 select ARCH_MSM_SCORPION
400 select MSM_SMP
Taniya Dasc43e6872012-03-21 16:41:14 +0530[diff] [blame]401 select HAVE_ARCH_HAS_CURRENT_TIMER
Pratik Patel2963de42012-05-17 12:43:40 -0700[diff] [blame]402 select MSM_JTAG if MSM_QDSS
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]403 bool
404
405config ARCH_MSM_KRAITMP
406 select ARCH_MSM_KRAIT
407 select MSM_SMP
Taniya Dasc43e6872012-03-21 16:41:14 +0530[diff] [blame]408 select HAVE_ARCH_HAS_CURRENT_TIMER
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]409 bool
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]410 select HAVE_HW_BRKPT_RESERVED_RW_ACCESS
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]411
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]412config ARCH_MSM_CORTEXMP
413 select MSM_SMP
414 bool
415
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]416config MSM_KRAIT_WFE_FIXUP
417 bool
418
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]419config ARCH_MSM_CORTEX_A5
Bryan Huntsman239ef1e2011-11-23 15:09:13 -0800[diff] [blame]420 bool
Rohit Vaswaniaf7ae272012-01-09 10:28:57 -0800[diff] [blame]421 select HAVE_HW_BRKPT_RESERVED_RW_ACCESS
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]422
423config ARCH_MSM7X27A
424 bool
425 select MSM_DALRPC
Justin Pauporeb3a33b72011-08-23 15:30:32 -0700[diff] [blame]426 select MSM_PROC_COMM_REGULATOR
Taniya Das86e0e132011-10-19 11:32:00 +0530[diff] [blame]427 select MULTI_IRQ_HANDLER
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]428 select ARM_GIC
429 select ARCH_MSM_CORTEXMP
Trilok Sonib856ab92012-06-26 14:33:28 +0530[diff] [blame]430 select MIGHT_HAVE_CACHE_L2X0
Chintan Pandya9b2fbf02012-08-30 19:39:59 +0530[diff] [blame]431 select ARM_HAS_SG_CHAIN
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]432
Gregory Beanf9f3d312010-04-30 22:06:50 -0700[diff] [blame]433config MSM_VIC
434 bool
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]435
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]436config MSM_RPM
437 bool "Resource Power Manager"
438 select MSM_MPM
439
Mahesh Sivasubramaniana8ff9922012-03-27 17:50:42 -0600[diff] [blame]440config MSM_RPM_SMD
441 depends on MSM_SMD
Mahesh Sivasubramanian102e5962012-06-20 13:12:11 -0600[diff] [blame]442 select MSM_MPM_OF
443 bool "RPM driver using SMD protocol"
444 help
445 RPM is the dedicated hardware engine for managing shared SoC
446 resources. This config adds driver support for using SMD as a
447 transport layer communication with RPM hardware. It also selects
448 the MSM_MPM config that programs the MPM module to monitor interrupts
449 during sleep modes.
Mahesh Sivasubramaniana8ff9922012-03-27 17:50:42 -0600[diff] [blame]450
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]451config MSM_MPM
452 bool "Modem Power Manager"
Mahesh Sivasubramanian102e5962012-06-20 13:12:11 -0600[diff] [blame]453 help
454 MPM is a dedicated hardware resource responsible for entering and
455 waking up from a system wide low power mode. The MPM driver tracks
456 the wakeup interrupts and configures the MPM to monitor the wakeup
457 interrupts when going to a system wide sleep mode.
458
459config MSM_MPM_OF
460 bool "Modem Power Manager"
461 depends on CONFIG_OF
462 help
463 MPM is a dedicated hardware resource responsible for entering and
464 waking up from a system wide low power mode. The MPM driver tracks
465 the wakeup interrupts and configures the MPM to monitor the wakeup
466 interrupts when going to a system wide sleep mode. This config option
467 enables the MPM driver that supports initialization from a device
468 tree
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]469
470config MSM_XO
471 bool
472
473config MSM_REMOTE_SPINLOCK_DEKKERS
474 bool
475config MSM_REMOTE_SPINLOCK_SWP
476 bool
477config MSM_REMOTE_SPINLOCK_LDREX
478 bool
Eric Holmbergeab10732011-09-23 19:44:43 -0600[diff] [blame]479config MSM_REMOTE_SPINLOCK_SFPB
480 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]481config MSM_ADM3
482 bool
483
484menu "MSM Board Selection"
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]485
486config MACH_HALIBUT
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]487 depends on ARCH_MSM7X01A
488 depends on MSM_STACKED_MEMORY
489 default y
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]490 bool "Halibut Board (QCT SURF7201A)"
491 help
492 Support for the Qualcomm SURF7201A eval board.
493
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]494config MACH_MSM7201A_SURF
495 depends on ARCH_MSM7X01A
496 depends on MSM_STACKED_MEMORY
497 default y
498 bool "MSM7201A SURF"
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]499 help
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]500 Support for the Qualcomm MSM7201A SURF eval board.
501
502config MACH_MSM7201A_FFA
503 depends on ARCH_MSM7X01A
504 depends on MSM_STACKED_MEMORY
505 default y
506 bool "MSM7201A FFA"
507 help
508 Support for the Qualcomm MSM7201A FFA eval board.
509
510config MACH_TROUT
511 depends on ARCH_MSM7X01A
512 depends on MSM_STACKED_MEMORY
513 default y
514 bool "Trout"
515
516config MACH_MSM7X27_SURF
517 depends on ARCH_MSM7X27
518 depends on !MSM_STACKED_MEMORY
519 default y
520 bool "MSM7x27 SURF"
521 help
522 Support for the Qualcomm MSM7x27 SURF eval board.
523
524config MACH_MSM7X27_FFA
525 depends on ARCH_MSM7X27
526 depends on !MSM_STACKED_MEMORY
527 default y
528 bool "MSM7x27 FFA"
529 help
530 Support for the Qualcomm MSM7x27 FFA eval board.
531
532config MACH_MSM7X27A_RUMI3
533 depends on ARCH_MSM7X27A
534 depends on !MSM_STACKED_MEMORY
535 default y
536 bool "MSM7x27A RUMI3"
537 help
538 Support for the Qualcomm MSM7x27A RUMI3 Emulation Platform.
539
540config MACH_MSM7X27A_SURF
541 depends on ARCH_MSM7X27A
542 depends on !MSM_STACKED_MEMORY
543 default y
544 bool "MSM7x27A SURF"
545 help
546 Support for the Qualcomm MSM7x27A SURF.
547
548config MACH_MSM7X27A_FFA
549 depends on ARCH_MSM7X27A
550 depends on !MSM_STACKED_MEMORY
551 default y
552 bool "MSM7x27A FFA"
553 help
554 Support for the Qualcomm MSM7x27A FFA.
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]555
Trilok Soni3d0f6c52011-07-26 16:06:58 +0530[diff] [blame]556config MACH_MSM7625A_SURF
557 depends on ARCH_MSM7X27A
558 depends on !MSM_STACKED_MEMORY
559 default y
560 bool "MSM7625A SURF"
561 help
562 Support for the Qualcomm MSM7625A SURF.
563
564config MACH_MSM7625A_FFA
565 depends on ARCH_MSM7X27A
566 depends on !MSM_STACKED_MEMORY
567 default y
568 bool "MSM7625A FFA"
569 help
570 Support for the Qualcomm MSM7625A FFA.
571
Taniya Dasc98bfbc2011-08-23 09:58:55 +0530[diff] [blame]572config MACH_MSM7627A_QRD1
573 depends on ARCH_MSM7X27A
574 depends on !MSM_STACKED_MEMORY
575 default y
576 bool "MSM7627A QRD1"
577 help
Chintan Pandyab1bad0e2012-02-06 19:04:51 +0530[diff] [blame]578 Support for the Qualcomm MSM7627A Reference Design.
579
580config MACH_MSM7627A_QRD3
581 depends on ARCH_MSM7X27A
582 depends on !MSM_STACKED_MEMORY
583 default y
584 bool "MSM7627A QRD3"
585 help
586 Support for the Qualcomm MSM7627A Reference Design.
Taniya Dasc98bfbc2011-08-23 09:58:55 +0530[diff] [blame]587
Taniya Dasc868a2e2012-01-03 10:18:47 +0530[diff] [blame]588config MACH_MSM7627A_EVB
589 depends on ARCH_MSM7X27A
590 depends on !MSM_STACKED_MEMORY
591 default y
592 bool "MSM7627A EVB"
593 help
594 Support for the Qualcomm MSM7627A Reference Design.
595
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]596config MACH_MSM8625_RUMI3
597 depends on ARCH_MSM8625
598 depends on !MSM_STACKED_MEMORY
599 default y
600 bool "MSM8625 RUMI3"
601 help
602 Support for the Qualcomm MSM8625 RUMI3 Emulation Platform.
603
Taniya Dase3027e22012-02-27 16:32:27 +0530[diff] [blame]604config MACH_MSM8625_SURF
605 depends on ARCH_MSM8625
606 depends on !MSM_STACKED_MEMORY
607 default y
608 bool "MSM8625 SURF"
609 help
610 Support for the Qualcomm MSM8625 SURF.
611
Aparna Mallavarapu9f000a72012-04-20 15:37:57 +0530[diff] [blame]612config MACH_MSM8625_FFA
613 depends on ARCH_MSM8625
614 depends on !MSM_STACKED_MEMORY
615 default y
616 bool "MSM8625 FFA"
617 help
618 Support for the Qualcomm MSM8625 FFA.
619
Chintan Pandyaf4ad4002012-02-28 19:49:03 +0530[diff] [blame]620config MACH_MSM8625_EVB
621 depends on ARCH_MSM8625
622 depends on !MSM_STACKED_MEMORY
623 default y
624 bool "MSM8625 EVB"
625 help
626 Support for the Qualcomm MSM8625 Reference Design.
627
Taniya Dasbd096542012-03-15 17:43:45 +0530[diff] [blame]628config MACH_MSM8625_QRD7
629 depends on ARCH_MSM8625
630 depends on !MSM_STACKED_MEMORY
631 default y
632 bool "MSM8625 QRD7"
633 help
634 Support for the Qualcomm MSM8625 Reference Design.
635
Aparna Mallavarapu5a326242012-05-09 19:49:02 +0530[diff] [blame]636config MACH_MSM8625_EVT
637 depends on ARCH_MSM8625
638 depends on !MSM_STACKED_MEMORY
639 default y
640 bool "MSM8625 EVT"
641 help
642 Support for the Qualcomm MSM8625 Reference Design.
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]643
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]644config MACH_MSM7X30_SURF
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]645 depends on ARCH_MSM7X30
646 depends on !MSM_STACKED_MEMORY
647 default y
648 bool "MSM7x30 SURF"
649 help
650 Support for the Qualcomm MSM7x30 SURF eval board.
651
652config MACH_MSM7X30_FFA
653 depends on ARCH_MSM7X30
654 depends on !MSM_STACKED_MEMORY
655 default y
656 bool "MSM7x30 FFA"
657 help
658 Support for the Qualcomm MSM7x30 FFA eval board.
659
660config MACH_MSM7X30_FLUID
661 depends on ARCH_MSM7X30
662 depends on !MSM_STACKED_MEMORY
663 default y
664 bool "MSM7x30 FLUID"
665 help
666 Support for the Qualcomm MSM7x30 FLUID eval board.
667
668config MACH_SAPPHIRE
669 depends on ARCH_MSM7X01A
670 default n
671 bool "Sapphire"
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]672
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]673config MACH_QSD8X50_SURF
674 depends on ARCH_QSD8X50
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]675 depends on MSM_SOC_REV_NONE
676 depends on MSM_STACKED_MEMORY
677 default y
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]678 bool "QSD8x50 SURF"
679 help
680 Support for the Qualcomm QSD8x50 SURF eval board.
681
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]682config MACH_QSD8X50_FFA
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]683 depends on ARCH_QSD8X50
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]684 depends on MSM_SOC_REV_NONE
685 depends on MSM_STACKED_MEMORY
686 default y
687 bool "QSD8x50 FFA"
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]688 help
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]689 Support for the Qualcomm QSD8x50 FFA eval board.
690
691config MACH_MSM7X25_SURF
692 depends on ARCH_MSM7X25
693 depends on !MSM_STACKED_MEMORY
694 default y
695 bool "MSM7x25 SURF"
696 help
697 Support for the Qualcomm MSM7x25 SURF eval board.
698
699config MACH_MSM7X25_FFA
700 depends on ARCH_MSM7X25
701 depends on !MSM_STACKED_MEMORY
702 default y
703 bool "MSM7x25 FFA"
704 help
705 Support for the Qualcomm MSM7x25 FFA eval board.
706
707config MACH_MSM8X55_SURF
708 depends on ARCH_MSM7X30
709 depends on !MSM_STACKED_MEMORY
710 default y
711 bool "MSM8X55 SURF"
712 help
713 Support for the Qualcomm MSM8x55 SURF eval board.
714
715config MACH_MSM8X55_FFA
716 depends on ARCH_MSM7X30
717 depends on !MSM_STACKED_MEMORY
718 default y
719 bool "MSM8X55 FFA"
720 help
721 Support for the Qualcomm MSM8x55 FFA eval board.
722
723config MACH_MSM8X55_SVLTE_FFA
724 depends on ARCH_MSM7X30
725 depends on !MSM_STACKED_MEMORY
726 default y
727 bool "MSM8X55 SVLTE FFA"
728 help
729 Support for the Qualcomm MSM8x55 SVLTE FFA eval board.
730
731config MACH_MSM8X55_SVLTE_SURF
732 depends on ARCH_MSM7X30
733 depends on !MSM_STACKED_MEMORY
734 default y
735 bool "MSM8X55 SVLTE SURF"
736 help
737 Support for the Qualcomm MSM8x55 SVLTE SURF eval board.
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]738
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]739config MACH_MSM8X60_SURF
740 depends on ARCH_MSM8X60
741 default n
742 bool "MSM8x60 SURF"
743 help
744 Support for the Qualcomm MSM8x60 SURF eval board.
745
Gregory Bean69b7f6f2010-04-04 22:29:02 -0700[diff] [blame]746config MACH_MSM8X60_FFA
747 depends on ARCH_MSM8X60
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]748 default n
Gregory Bean69b7f6f2010-04-04 22:29:02 -0700[diff] [blame]749 bool "MSM8x60 FFA"
750 help
751 Support for the Qualcomm MSM8x60 FFA eval board.
752
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]753config MACH_MSM8X60_FLUID
754 depends on ARCH_MSM8X60
755 default n
756 bool "MSM8x60 FLUID"
757 help
758 Support for the Qualcomm MSM8x60 FLUID platform. The FLUID is an
759 8x60 target which has a form factor that is much closer to that
760 of a phone than other targets. It also has a new display and
761 touchscreen controller.
762
763config MACH_MSM8X60_FUSION
764 depends on ARCH_MSM8X60
765 default n
766 bool "MSM8x60 FUSION"
767 help
768 Support for the Qualcomm MSM8x60 Fusion SURF device.
769
770config MACH_MSM8X60_FUSN_FFA
771 depends on ARCH_MSM8X60
772 default n
773 bool "MSM8x60 FUSN FFA"
774 help
775 Support for the Qualcomm MSM8x60 Fusion FFA device.
776
Zhang Chang Kenef05b172011-07-27 15:28:13 -0400[diff] [blame]777config MACH_MSM8X60_DRAGON
778 depends on ARCH_MSM8X60
779 default n
780 bool "MSM8x60 DRAGON"
781 help
782 Support for the Qualcomm MSM8x60 Dragon board.
783
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]784config MACH_MSM8960_CDP
785 depends on ARCH_MSM8960
786 bool "MSM8960 CDP"
787 help
788 Support for the Qualcomm MSM8960 CDP device.
789
790config MACH_MSM8960_MTP
791 depends on ARCH_MSM8960
792 bool "MSM8960 MTP"
793 help
794 Support for the Qualcomm MSM8960 MTP device.
795
796config MACH_MSM8960_FLUID
797 depends on ARCH_MSM8960
798 bool "MSM8960 FLUID"
799 help
800 Support for the Qualcomm MSM8960 FLUID device.
801
Amir Samuelov0d1f8ae2011-07-28 11:13:58 +0300[diff] [blame]802config MACH_MSM8960_LIQUID
803 depends on ARCH_MSM8960
804 bool "MSM8960 LIQUID"
805 help
806 Support for the Qualcomm MSM8960 LIQUID device.
807
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]808config MACH_MSM8930_CDP
809 depends on ARCH_MSM8930
810 bool "MSM8930 CDP"
811 help
812 Support for the Qualcomm MSM8930 CDP device.
813
814config MACH_MSM8930_MTP
815 depends on ARCH_MSM8930
816 bool "MSM8930 MTP"
817 help
818 Support for the Qualcomm MSM8930 MTP device.
819
820config MACH_MSM8930_FLUID
821 depends on ARCH_MSM8930
822 bool "MSM8930 FLUID"
823 help
824 Support for the Qualcomm MSM8930 FLUID device.
825
Stepan Moskovchenko8768eff2011-12-01 18:55:07 -0800[diff] [blame]826config MACH_MSM8627_CDP
827 depends on ARCH_MSM8930
828 bool "MSM8627 CDP"
829 help
830 Support for the Qualcomm MSM8627 CDP device.
831
832config MACH_MSM8627_MTP
833 depends on ARCH_MSM8930
834 bool "MSM8627 MTP"
835 help
836 Support for the Qualcomm MSM8627 MTP device.
837
Rohit Vaswania8e7a832011-09-28 21:00:05 -0700[diff] [blame]838config MACH_MSM9615_CDP
839 depends on ARCH_MSM9615
840 bool "MSM9615 CDP"
841 help
842 Support for the Qualcomm MSM9615 CDP device.
843
844config MACH_MSM9615_MTP
845 depends on ARCH_MSM9615
846 bool "MSM9615 MTP"
847 help
848 Support for the Qualcomm MSM9615 MTP device.
849
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]850config MSM_USE_TSIF1
851 depends on ARCH_MSM8X60
852 bool "MSM8x60 use TSIF1"
853 help
854 Selects TSIF1 core to be used rather than TSIF0.
855 The two TSIF cores share the same DM configuration
856 so they cannot be used simultaneously.
857
Joel King82b7e3f2012-01-05 10:03:27 -0800[diff] [blame]858config MACH_APQ8064_CDP
859 depends on ARCH_APQ8064
860 bool "APQ8064 CDP"
861 help
862 Support for the Qualcomm APQ8064 CDP device.
863
864config MACH_APQ8064_MTP
865 depends on ARCH_APQ8064
866 bool "APQ8064 MTP"
867 help
868 Support for the Qualcomm APQ8064 MTP device.
869
870config MACH_APQ8064_LIQUID
871 depends on ARCH_APQ8064
872 bool "APQ8064 LIQUID"
873 help
874 Support for the Qualcomm APQ8064 LIQUID device.
875
Joel King064bbf82012-04-01 13:23:39 -0700[diff] [blame]876config MACH_MPQ8064_CDP
877 depends on ARCH_APQ8064
878 bool "MPQ8064 CDP"
879 help
880 Support for the Qualcomm MPQ8064 CDP device.
881
Joel King11ca8202012-02-13 16:19:03 -0800[diff] [blame]882config MACH_MPQ8064_HRD
883 depends on ARCH_APQ8064
884 bool "MPQ8064 HRD"
885 help
886 Support for the Qualcomm MPQ8064 HRD device.
887
888config MACH_MPQ8064_DTV
889 depends on ARCH_APQ8064
890 bool "MPQ8064 DTV"
891 help
892 Support for the Qualcomm MPQ8064 DTV device.
893
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]894config MACH_FSM9XXX_SURF
895 depends on ARCH_FSM9XXX
896 depends on !MSM_STACKED_MEMORY
897 default y
898 bool "FSM9XXX SURF"
899 help
900 Support for the Qualcomm FSM9xxx femtocell
901 chipset based SURF evaluation board and
902 FFA board.
903
Devin Kimb0a55c82012-06-26 12:44:15 -0700[diff] [blame]904config MACH_MSM_DUMMY
905 bool "NONE (No device)"
906
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]907endmenu
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]908
Devin Kima3085422012-06-14 18:23:41 -0700[diff] [blame]909source "arch/arm/mach-msm/lge/Kconfig"
910
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]911config MSM_STACKED_MEMORY
912 bool "Stacked Memory"
913 default y
Stepan Moskovchenko24f61732011-02-11 12:28:16 -0800[diff] [blame]914 help
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]915 This option is used to indicate the presence of on-die stacked
916 memory. When present this memory bank is used for a high speed
917 shared memory interface. When not present regular RAM is used.
Stepan Moskovchenko24f61732011-02-11 12:28:16 -0800[diff] [blame]918
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]919config PHYS_OFFSET
920 hex
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]921 default "0x40800000" if ARCH_MSM9615
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]922 default "0x80200000" if ARCH_APQ8064
923 default "0x80200000" if ARCH_MSM8960
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]924 default "0x80200000" if ARCH_MSM8930
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]925 default "0x00000000" if ARCH_MSM8974
Syed Rameez Mustafa2af59732012-08-23 17:27:24 -0700[diff] [blame]926 default "0x00000000" if ARCH_MPQ8092
927 default "0x00000000" if ARCH_MSM8226
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]928 default "0x10000000" if ARCH_FSM9XXX
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]929 default "0x20200000" if ARCH_MSM9625
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]930 default "0x00200000" if !MSM_STACKED_MEMORY
931 default "0x00000000" if ARCH_QSD8X50 && MSM_SOC_REV_A
932 default "0x20000000" if ARCH_QSD8X50
933 default "0x40200000" if ARCH_MSM8X60
934 default "0x10000000"
Stepan Moskovchenko24f61732011-02-11 12:28:16 -0800[diff] [blame]935
Mitchel Humpherys05e58812012-08-13 14:24:13 -0700[diff] [blame]936config KERNEL_MSM_CONTIG_MEM_REGION
937 bool "Enable in-kernel contiguous memory region"
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]938 default y if ARCH_MSM8X60
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]939 depends on ANDROID_PMEM && (ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM8974)
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]940 help
Mitchel Humpherys05e58812012-08-13 14:24:13 -0700[diff] [blame]941 Enable the in-kernel contiguous memory allocator. Sets up a
942 region of physically contiguous memory. This memory is
943 reserved during initialization, and can be used
944 generically.
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]945
946config KERNEL_PMEM_SMI_REGION
947 bool "Enable in-kernel PMEM region for SMI"
948 default y if ARCH_MSM8X60
949 depends on ANDROID_PMEM && ((ARCH_QSD8X50 && !PMEM_GPU0) || (ARCH_MSM8X60 && !VCM))
950 help
951 Enable the in-kernel PMEM allocator to use SMI memory.
952
953config PMEM_GPU0
954 bool "Enable PMEM GPU0 region"
955 default y
956 depends on ARCH_QSD8X50 && ANDROID_PMEM
957 help
958 Enable the PMEM GPU0 device on SMI Memory.
959
960config MSM_AMSS_VERSION
961 int
962 default 6210 if MSM_AMSS_VERSION_6210
963 default 6220 if MSM_AMSS_VERSION_6220
964 default 6225 if MSM_AMSS_VERSION_6225
965
966choice
967 prompt "AMSS modem firmware version"
968
969 default MSM_AMSS_VERSION_6225
970
971 config MSM_AMSS_VERSION_6210
972 bool "6.2.10"
973
974 config MSM_AMSS_VERSION_6220
975 bool "6.2.20"
976
977 config MSM_AMSS_VERSION_6225
978 bool "6.2.20 + New ADSP"
979endchoice
Stepan Moskovchenko2607b0a2010-11-15 17:46:10 -0800[diff] [blame]980
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]981config MSM_HAS_DEBUG_UART_HS
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]982 bool
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]983 help
984 Say Y here if high speed MSM UART is present.
985
986config MSM_HAS_DEBUG_UART_HS_V14
987 bool
988 select MSM_HAS_DEBUG_UART_HS
989 help
990 Say Y here if high speed MSM UART v1.4 is present.
991
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]992config MSM_DEBUG_UART_PHYS
993 hex
994 default 0xA9A00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART1
995 default 0xACA00000 if ARCH_MSM7X30 && DEBUG_MSM_UART1
996 default 0x94000000 if ARCH_FSM9XXX && DEBUG_MSM_UART1
997 default 0xA9B00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART2
998 default 0xACB00000 if ARCH_MSM7X30 && DEBUG_MSM_UART2
999 default 0x94100000 if ARCH_FSM9XXX && DEBUG_MSM_UART2
1000 default 0xA9C00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART3
1001 default 0xACC00000 if ARCH_MSM7X30 && DEBUG_MSM_UART3
1002
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1003choice
1004 prompt "Debug UART"
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1005 depends on DEBUG_LL
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1006
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1007 config DEBUG_MSM_UART1
1008 bool "Kernel low-level debugging messages via MSM UART1"
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1009 depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50 || ARCH_FSM9XXX
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1010 help
1011 Say Y here if you want the debug print routines to direct
1012 their output to the first serial port on MSM devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1013
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1014 config DEBUG_MSM_UART2
1015 bool "Kernel low-level debugging messages via MSM UART2"
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1016 depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50 || ARCH_FSM9XXX
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1017 help
1018 Say Y here if you want the debug print routines to direct
1019 their output to the second serial port on MSM devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1020
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1021 config DEBUG_MSM_UART3
1022 bool "Kernel low-level debugging messages via MSM UART3"
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1023 depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1024 help
1025 Say Y here if you want the debug print routines to direct
1026 their output to the third serial port on MSM devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1027
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1028 config DEBUG_MSM8660_UART
1029 bool "Kernel low-level debugging messages via MSM 8660 UART"
1030 depends on ARCH_MSM8X60
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1031 select MSM_HAS_DEBUG_UART_HS
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1032 help
1033 Say Y here if you want the debug print routines to direct
1034 their output to the serial port on MSM 8660 devices.
Steve Mucklec8aabae2010-04-21 16:20:27 -0700[diff] [blame]1035
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1036 config DEBUG_MSM8960_UART
1037 bool "Kernel low-level debugging messages via MSM 8960 UART"
Stepan Moskovchenko824db172012-05-29 18:05:09 -0700[diff] [blame]1038 depends on ARCH_MSM8960 && DEBUG_LL
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1039 select MSM_HAS_DEBUG_UART_HS
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1040 help
1041 Say Y here if you want the debug print routines to direct
1042 their output to the serial port on MSM 8960 devices.
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1043
Stepan Moskovchenko824db172012-05-29 18:05:09 -0700[diff] [blame]1044 config DEBUG_MSM8930_UART
1045 bool "Kernel low-level debugging messages via MSM 8930 UART"
1046 depends on ARCH_MSM8930 && DEBUG_LL
1047 select MSM_HAS_DEBUG_UART_HS
1048 help
1049 Say Y here if you want the debug print routines to direct
1050 their output to the serial port on MSM 8930 devices.
1051
1052 config DEBUG_APQ8064_UART
1053 bool "Kernel low-level debugging messages via APQ 8064 UART"
1054 depends on ARCH_APQ8064 && DEBUG_LL
1055 select MSM_HAS_DEBUG_UART_HS
1056 help
1057 Say Y here if you want the debug print routines to direct
1058 their output to the serial port on APQ 8064 devices.
1059
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]1060 config DEBUG_MSM8974_UART
1061 bool "Kernel low-level debugging messages via MSM 8974 UART"
1062 depends on ARCH_MSM8974
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1063 select MSM_HAS_DEBUG_UART_HS_V14
1064 help
1065 Say Y here if you want the debug print routines to direct
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]1066 their output to the serial port on MSM 8974 devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1067endchoice
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1068
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1069choice
1070 prompt "Default Timer"
1071 default MSM7X00A_USE_GP_TIMER
1072
1073 config MSM7X00A_USE_GP_TIMER
1074 bool "GP Timer"
1075 help
1076 Low resolution timer that allows power collapse from idle.
1077
1078 config MSM7X00A_USE_DG_TIMER
1079 bool "DG Timer"
1080 help
1081 High resolution timer.
1082endchoice
1083
1084choice
1085 prompt "Suspend sleep mode"
1086 default MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1087 help
1088 Allows overriding the sleep mode used. Leave at power
1089 collapse suspend unless the arm9 image has problems.
1090
1091 config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1092 bool "Power collapse suspend"
1093 help
1094 Lowest sleep state. Returns through reset vector.
1095
1096 config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
1097 bool "Power collapse"
1098 help
1099 Sleep state that returns through reset vector.
1100
1101 config MSM7X00A_SLEEP_MODE_APPS_SLEEP
1102 bool "Apps Sleep"
1103
1104 config MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1105 bool "Ramp down cpu clock and wait for interrupt"
1106
1107 config MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
1108 bool "Wait for interrupt"
1109endchoice
1110
1111config MSM7X00A_SLEEP_MODE
1112 int
1113 default 0 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1114 default 1 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
1115 default 2 if MSM7X00A_SLEEP_MODE_APPS_SLEEP
1116 default 3 if MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1117 default 4 if MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
1118
1119choice
1120 prompt "Idle sleep mode"
1121 default MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
1122 help
1123 Allows overriding the sleep mode used from idle. Leave at power
1124 collapse suspend unless the arm9 image has problems.
1125
1126 config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1127 bool "Power collapse suspend"
1128 help
1129 Lowest sleep state. Returns through reset vector.
1130
1131 config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
1132 bool "Power collapse"
1133 help
1134 Sleep state that returns through reset vector.
1135
1136 config MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
1137 bool "Apps Sleep"
1138
1139 config MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1140 bool "Ramp down cpu clock and wait for interrupt"
1141
1142 config MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
1143 bool "Wait for interrupt"
1144endchoice
1145
1146config MSM7X00A_IDLE_SLEEP_MODE
1147 int
1148 default 0 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1149 default 1 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
1150 default 2 if MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
1151 default 3 if MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1152 default 4 if MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
1153
1154config MSM7X00A_IDLE_SLEEP_MIN_TIME
1155 int "Minimum idle time before sleep"
1156 default 20000000
1157 help
1158 Minimum idle time in nanoseconds before entering low power mode.
1159
1160config MSM7X00A_IDLE_SPIN_TIME
1161 int "Idle spin time before cpu ramp down"
1162 default 80000
1163 help
1164 Spin time in nanoseconds before ramping down cpu clock and entering
1165 any low power state.
1166
1167menuconfig MSM_IDLE_STATS
1168 bool "Collect idle statistics"
1169 default y
1170 help
1171 Collect idle statistics and export them in proc/msm_pm_stats.
1172
1173if MSM_IDLE_STATS
1174
1175config MSM_IDLE_STATS_FIRST_BUCKET
1176 int "First bucket time"
1177 default 62500
1178 help
1179 Upper time limit in nanoseconds of first bucket.
1180
1181config MSM_IDLE_STATS_BUCKET_SHIFT
1182 int "Bucket shift"
1183 default 2
1184
1185config MSM_IDLE_STATS_BUCKET_COUNT
1186 int "Bucket count"
1187 default 10
1188
1189config MSM_SUSPEND_STATS_FIRST_BUCKET
1190 int "First bucket time for suspend"
1191 default 1000000000
1192 help
1193 Upper time limit in nanoseconds of first bucket of the
1194 histogram. This is for collecting statistics on suspend.
1195
1196endif # MSM_IDLE_STATS
1197
1198config CPU_HAS_L2_PMU
1199 bool "L2CC PMU Support"
1200 help
1201 Select this if the L2 cache controller has a Performance Monitoring Unit.
1202
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1203config HTC_HEADSET
1204 tristate "HTC 2 Wire detection driver"
1205 default n
1206 help
1207 Provides support for detecting HTC 2 wire devices, such as wired
1208 headset, on the trout platform. Can be used with the msm serial
1209 debugger, but not with serial console.
1210
1211config TROUT_BATTCHG
1212 depends on MACH_TROUT && POWER_SUPPLY
1213 default y
1214 bool "Trout battery / charger driver"
1215
1216config HTC_PWRSINK
1217 depends on MSM_SMD
1218 default n
1219 bool "HTC Power Sink Driver"
1220
1221config QSD_SVS
1222 bool "QSD Static Voltage Scaling"
1223 depends on (MACH_QSD8X50_SURF || MACH_QSD8X50_FFA)
1224 default y
1225 select TPS65023
1226 help
1227 Enables static voltage scaling using the TPS65023 PMIC.
1228
1229config QSD_PMIC_DEFAULT_DCDC1
1230 int "PMIC default output voltage"
1231 depends on (MACH_QSD8X50_SURF || MACH_QSD8X50_FFA)
1232 default 1250
1233 help
1234 This is the PMIC voltage at Linux kernel boot.
1235
1236config MSM_FIQ_SUPPORT
1237 default y
1238 bool "Enable installation of an FIQ handler."
1239
1240config MSM_SERIAL_DEBUGGER
1241 select MSM_FIQ_SUPPORT
1242 select KERNEL_DEBUGGER_CORE
1243 default n
1244 bool "FIQ Mode Serial Debugger"
1245 help
1246 The FIQ serial debugger can accept commands even when the
1247 kernel is unresponsive due to being stuck with interrupts
1248 disabled. Depends on the kernel debugger core in drivers/misc.
1249
1250config MSM_SERIAL_DEBUGGER_CONSOLE
1251 depends on MSM_SERIAL_DEBUGGER
1252 default n
1253 bool "Console on FIQ Serial Debugger port"
1254 help
1255 Enables a console so that printk messages are displayed on
1256 the debugger serial port as the occur.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1257
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]1258config MSM_PROC_COMM
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1259 default y
1260 bool "Proc-Comm RPC Interface"
1261 help
1262 Enables a lightweight communications interface to the
1263 baseband processor.
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]1264
Gregory Bean1963a2a2010-08-28 10:05:44 -0700[diff] [blame]1265config MSM_SMD
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1266 bool "MSM Shared Memory Driver (SMD)"
1267 help
1268 Support for the shared memory interface between the apps
1269 processor and the baseband processor. Provides access to
1270 the "shared heap", as well as virtual serial channels
1271 used to communicate with various services on the baseband
1272 processor.
1273
1274choice
1275 prompt "MSM Shared memory interface version"
1276 depends on MSM_SMD
1277 default MSM_SMD_PKG3 if ARCH_MSM_ARM11
1278 default MSM_SMD_PKG4 if ARCH_MSM_SCORPION
1279
1280 config MSM_SMD_PKG3
1281 bool
1282 prompt "Package 3"
1283
1284 config MSM_SMD_PKG4
1285 bool
1286 prompt "Package 4"
1287endchoice
1288
Niranjana Vishwanathapuraf1427ac2012-05-03 14:28:21 -0600[diff] [blame]1289config MSM_PCIE
1290 bool "MSM PCIe Controller driver"
1291 depends on PCI && PCI_MSI
1292 help
1293 Enables the PCIe functionality by configures PCIe core on
1294 MSM chipset and by enabling the ARM PCI framework extension.
1295
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1296config MSM_RPC_SDIO_XPRT
1297 depends on MSM_SDIO_AL
1298 default y
1299 bool "MSM SDIO XPRT Layer"
1300 help
1301 SDIO Transport Layer for RPC Rouer
1302
1303config MSM_RPC_SDIO_DEBUG
1304 depends on MSM_RPC_SDIO_XPRT
1305 default y
1306 bool "MSM SDIO XPRT debug support"
1307 help
1308 Support for debugging SDIO XPRT
1309
1310config MSM_SMD_DEBUG
1311 depends on MSM_SMD
1312 default y
1313 bool "MSM SMD debug support"
1314 help
1315 Support for debugging the SMD for communication
1316 between the ARM9 and ARM11
1317
1318config MSM_SDIO_AL
1319 depends on ((ARCH_MSM7X30 || MACH_MSM8X60_FUSN_FFA || MACH_TYPE_MSM8X60_FUSION) && HAS_WAKELOCK)
1320 default y
1321 tristate "SDIO-Abstraction-Layer"
1322 help
1323 Support MSM<->MDM Communication over SDIO bus.
1324 MDM SDIO-Client should have pipes support.
1325
1326config MSM_SDIO_DMUX
1327 bool "SDIO Data Mux Driver"
1328 depends on MSM_SDIO_AL
1329 default n
1330 help
1331 Support Muxed Data Channels over SDIO interface.
1332
1333config MSM_BAM_DMUX
1334 bool "BAM Data Mux Driver"
1335 depends on SPS
1336 default n
1337 help
1338 Support Muxed Data Channels over BAM interface.
1339 BAM has a limited number of pipes. This driver
1340 provides a means to support more logical channels
1341 via muxing than BAM could without muxing.
1342
1343config MSM_N_WAY_SMD
Jeff Hugo0c0f5e92011-09-28 13:55:45 -0600[diff] [blame]1344 depends on (MSM_SMD && !(ARCH_MSM7X01A))
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1345 default y
1346 bool "MSM N-WAY SMD support"
1347 help
1348 Supports APPS-QDSP SMD communication along with
1349 normal APPS-MODEM SMD communication.
1350
1351config MSM_N_WAY_SMSM
Jeff Hugo0c0f5e92011-09-28 13:55:45 -0600[diff] [blame]1352 depends on (MSM_SMD && !(ARCH_MSM7X01A))
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1353 default y
1354 bool "MSM N-WAY SMSM support"
1355 help
1356 Supports APPS-QDSP SMSM communication along with
1357 normal APPS-MODEM SMSM communication.
1358
1359config MSM_RESET_MODEM
1360 tristate "Reset Modem Driver"
1361 depends on MSM_SMD
1362 default m
1363 help
1364 Allows the user to reset the modem through a device node.
1365
1366config MSM_SMD_LOGGING
1367 depends on MSM_SMD
1368 default y
1369 bool "MSM Shared Memory Logger"
1370 help
1371 This option exposes the shared memory logger at /dev/smem_log
1372 and a debugfs node named smem_log.
1373
1374 If in doubt, say yes.
1375
Karthikeyan Ramasubramaniane1f4f732011-08-08 13:34:47 -0600[diff] [blame]1376config MSM_IPC_LOGGING
1377 bool "MSM Debug Logging for IPC Drivers"
1378 help
1379 This option allows the debug logging for IPC Drivers.
1380
1381 If in doubt, say no.
1382
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1383config MSM_SMD_NMEA
1384 bool "NMEA GPS Driver"
1385 depends on MSM_SMD
1386 default y
1387 help
1388 Enable this to support the NMEA GPS device.
1389
1390 If in doubt, say yes.
1391
1392config MSM_SDIO_TTY
1393 bool "SDIO TTY Driver"
1394 depends on MSM_SDIO_AL
1395 default n
1396 help
1397 Provides a TTY driver SDIO TTY
1398 This driver can be used by user space
1399 applications for passing data through the
1400 SDIO interface.
1401
Devin Kim39bbf562012-07-12 08:20:49 -0700[diff] [blame]1402config MSM_HSIC_TTY
1403 bool "HSIC TTY Driver"
1404 default n
1405 help
1406 Provides a TTY driver HSIC TTY
1407 This driver can be used by user space
1408 applications for passing data through the
1409 HSIC interface.
1410
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1411config MSM_SMD_TTY
1412 bool "SMD TTY Driver"
1413 depends on MSM_SMD
1414 default y
1415 help
1416 Provides TTY interfaces to interact with the modem.
1417
1418 If in doubt, say yes.
1419
1420config MSM_SMD_QMI
1421 bool "SMD QMI Driver"
1422 depends on MSM_SMD
1423 default y
1424 help
1425 Manages network data connections.
1426
1427 If in doubt, say yes.
1428
1429config MSM_SMD_PKT
1430 bool "SMD Packet Driver"
1431 depends on MSM_SMD
1432 default y
1433 help
1434 Provides a binary SMD non-muxed packet port interface.
1435
1436 If in doubt, say yes.
1437
1438config MSM_SDIO_CMUX
1439 bool "SDIO CMUX Driver"
1440 depends on MSM_SDIO_AL
1441 default n
1442 help
1443 Provides a Muxed port interface over SDIO QMI
1444
1445config MSM_DSPS
1446 bool "Sensors DSPS driver"
1447 depends on (MSM_PIL && (ARCH_MSM8X60 || ARCH_MSM8960))
1448 default n
1449 help
1450 Provides user-space interface to the sensors manager
1451 to turn on/off the Sensors Processor system clocks.
1452 It is the DSPS responsibility to turn on/off the sensors
1453 themself.
1454 The number of clocks and their name may vary between targets.
1455 It also triggers the PIL to load the DSPS firmware.
1456
1457config MSM_SDIO_CTL
1458 bool "SDIO CTL Driver"
1459 depends on MSM_SDIO_CMUX
1460 default n
1461 help
1462 Provides a binary SDIO control port interface.
1463
1464config MSM_ONCRPCROUTER
1465 depends on MSM_SMD
1466 default n
1467 bool "MSM ONCRPC router support"
1468 help
1469 Support for the MSM ONCRPC router for communication between
1470 the ARM9 and ARM11
1471
1472config MSM_IPC_ROUTER
Karthikeyan Ramasubramanianda45b432011-09-23 14:39:30 -0600[diff] [blame]1473 depends on NET
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1474 default n
1475 bool "MSM IPC Router support"
1476 help
1477 Support for the MSM IPC Router for communication between
1478 the APPs and the MODEM
1479
Karthikeyan Ramasubramanianda45b432011-09-23 14:39:30 -0600[diff] [blame]1480config MSM_IPC_ROUTER_SMD_XPRT
1481 depends on MSM_SMD
1482 depends on MSM_IPC_ROUTER
1483 default n
1484 bool "MSM SMD XPRT Layer"
1485 help
1486 SMD Transport Layer for IPC Router
1487
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1488config MSM_ONCRPCROUTER_DEBUG
1489 depends on MSM_ONCRPCROUTER
1490 default y
1491 bool "MSM debug ONCRPC router support"
1492 help
1493 Support for debugging the ONCRPC router for communication
1494 between the ARM9 and ARM11
1495
1496config MSM_RPC_LOOPBACK_XPRT
1497 depends on MSM_ONCRPCROUTER
1498 default n
1499 bool "MSM RPC local routing support"
1500 help
1501 Support for routing RPC messages between APPS clients
1502 and APPS servers. Helps in testing APPS RPC framework.
1503
1504config MSM_RPCSERVER_TIME_REMOTE
1505 depends on MSM_ONCRPCROUTER && RTC_HCTOSYS
1506 default y
1507 bool "Time remote RPC server"
1508 help
1509 The time remote server receives notification of time bases and
1510 reports these events to registered callback functions.
1511
1512config MSM_RPCSERVER_WATCHDOG
1513 depends on MSM_ONCRPCROUTER
1514 default y
1515 bool "Watchdog RPC server"
1516 help
1517 The dog_keepalive server handles watchdog events.
1518
1519config MSM_RPC_WATCHDOG
1520 depends on MSM_ONCRPCROUTER
1521 default n
1522 bool "Watchdog RPC client"
1523 help
1524 The dog_keepalive client module.
1525
1526config MSM_RPC_PING
1527 depends on MSM_ONCRPCROUTER && DEBUG_FS
1528 default m
1529 bool "MSM rpc ping"
1530 help
1531 Implements MSM rpc ping test module.
1532
1533config MSM_RPC_PROC_COMM_TEST
1534 depends on DEBUG_FS && MSM_PROC_COMM
1535 default m
1536 bool "MSM rpc proc comm test"
1537 help
1538 Implements MSM rpc proc comm test module.
1539
1540config MSM_RPC_OEM_RAPI
1541 depends on MSM_ONCRPCROUTER
1542 default m
1543 bool "MSM oem rapi"
1544 help
1545 Implements MSM oem rapi client module.
1546
1547config MSM_RPCSERVER_HANDSET
1548 depends on MSM_ONCRPCROUTER
1549 default y
1550 bool "Handset events RPC server"
1551 help
1552 Support for receiving handset events like headset detect,
1553 headset switch and clamshell state.
1554
1555config MSM_RMT_STORAGE_CLIENT
1556 depends on (ARCH_MSM && MSM_ONCRPCROUTER)
1557 default n
1558 bool "Remote Storage RPC client"
1559 help
1560 Provide RPC mechanism for remote processors to access storage
1561 device on apps processor.
1562
1563config MSM_RMT_STORAGE_CLIENT_STATS
1564 depends on (MSM_RMT_STORAGE_CLIENT && DEBUG_FS)
1565 default n
1566 bool "Remote storage RPC client performance statistics"
1567 help
1568 Collects performance statistics and shows this information
1569 through a debugfs file rmt_storage_stats.
1570
1571config MSM_SDIO_SMEM
1572 depends on MSM_SDIO_AL
1573 default n
1574 bool "SDIO SMEM for remote storage"
1575 help
1576 Copies data from remote MDM9K memory to local MSM8x60
1577 memory. Used by remote storage client to shadow
1578 MDM9K filesystem.
1579
1580config MSM_DALRPC
1581 bool "DAL RPC support"
Bryan Huntsman18b3c0c2011-11-23 15:12:58 -0800[diff] [blame]1582 default n
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1583 help
1584 Supports RPC calls to DAL devices on remote processor cores.
1585
1586config MSM_DALRPC_TEST
1587 tristate "DAL RPC test module"
1588 depends on (MSM_DALRPC && DEBUG_FS)
1589 default m
1590 help
1591 Exercises DAL RPC calls to QDSP6.
1592
1593if CPU_FREQ_MSM
1594
1595config MSM_CPU_FREQ_SET_MIN_MAX
1596 bool "Set Min/Max CPU frequencies."
1597 default n
1598 help
1599 Allow setting min and max CPU frequencies. Sysfs can be used
1600 to override these values.
1601
1602config MSM_CPU_FREQ_MAX
1603 int "Max CPU Frequency"
1604 depends on MSM_CPU_FREQ_SET_MIN_MAX
1605 default 384000
1606
1607config MSM_CPU_FREQ_MIN
1608 int "Min CPU Frequency"
1609 depends on MSM_CPU_FREQ_SET_MIN_MAX
1610 default 245760
1611
1612endif # CPU_FREQ_MSM
1613
1614config MSM_CPU_AVS
1615 bool "Enable software controlled Adaptive Voltage Scaling (AVS)"
1616 depends on (ARCH_MSM_SCORPION && QSD_SVS)
1617 depends on ARCH_QSD8X50
1618 default n
1619 select MSM_AVS_HW
1620 help
1621 This enables the s/w control of Adaptive Voltage Scaling feature
1622 in Qualcomm ARMv7 CPUs. It adjusts the voltage for each frequency
1623 based on feedback from three ring oscillators in the CPU.
1624
1625config MSM_AVS_HW
1626 bool "Enable Adaptive Voltage Scaling (AVS)"
1627 default n
1628 help
1629 Enable AVS hardware to fine tune voltage at each frequency. The
1630 AVS hardware blocks associated with each Qualcomm ARMv7 cores can
1631 fine tune the voltages based on the feedback from the ring
1632 oscillators.
1633
1634config MSM_HW3D
1635 tristate "MSM Hardware 3D Register Driver"
1636 depends on ANDROID_PMEM
1637 default y
1638 help
1639 Provides access to registers needed by the userspace OpenGL|ES
1640 library.
1641
1642config MSM_ADSP
1643 depends on (ARCH_MSM7X01A || ARCH_MSM7X25 || ARCH_MSM7X27)
1644 tristate "MSM ADSP driver"
1645 depends on ANDROID_PMEM
1646 default y
1647 help
1648 Provides access to registers needed by the userspace aDSP library.
1649
1650config ADSP_RPC_VER
1651 hex
1652 default 0x30002 if (ARCH_MSM7X27 || (ARCH_MSM7X25 && AMSS_7X25_VERSION_2009))
1653 default 0x30001 if (ARCH_MSM7X01A || (ARCH_MSM7X25 && AMSS_7X25_VERSION_2008))
1654 depends on MSM_ADSP
1655 help
1656 Select proper ADSP RPC version
1657choice
1658 prompt "ADSP RPC version"
1659
1660 default AMSS_7X25_VERSION_2009
1661
1662 config AMSS_7X25_VERSION_2009
1663 bool "2.0.09"
1664
1665 config AMSS_7X25_VERSION_2008
1666 bool "2.0.08"
1667endchoice
1668
1669config MSM7KV2_AUDIO
1670 bool "MSM7K v2 audio"
1671 depends on (ARCH_MSM7X30 && ANDROID_PMEM)
1672 default y
1673 help
1674 Enables QDSP5V2-based audio drivers for audio playbacks and
1675 voice call.
1676
1677config MSM_ADSP_REPORT_EVENTS
1678 bool "Report modem events from the DSP"
1679 default y
1680 depends on (MSM_ADSP || MSM7KV2_AUDIO)
1681 help
1682 Normally, only messages from the aDSP are reported to userspace.
1683 With this option, we report events from the aDSP as well.
1684
1685config MSM_QDSP6
1686 tristate "QDSP6 support"
1687 depends on ARCH_QSD8X50 && ANDROID_PMEM
1688 default y
1689 help
1690 Enable support for qdsp6. This provides audio and video functionality.
1691
1692config MSM8X60_AUDIO
1693 tristate "MSM8X60 audio support"
1694 depends on ARCH_MSM8X60 && ANDROID_PMEM
1695 default y
1696 help
1697 Enable support for qdsp6v2. This provides audio functionality.
1698
1699config MSM8X60_FTM_AUDIO_DEVICES
1700 bool "MSM8X60 audio factory test mode support"
1701 depends on MSM8X60_AUDIO
1702 help
1703 Enable support audio factory test mode devices. This is used
1704 in a production line environment.
1705
Ben Romberger45b351c2011-07-20 22:37:27 -0700[diff] [blame]1706config RTAC
1707 bool "MSM8K real-time audio calibration support"
1708 default y
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1709 help
Ben Romberger45b351c2011-07-20 22:37:27 -0700[diff] [blame]1710 Enable support for rtac. This enables calibration during
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1711 audio operation
1712
1713config MSM7X27A_AUDIO
1714 bool "MSM7X27A audio support"
1715 depends on ARCH_MSM7X27A && MSM_ADSP
1716 default n
1717 help
1718 Enable support for 7x27a. This provides audio functionality.
1719
Justin Pauporea6cd2092011-06-22 16:19:45 -0700[diff] [blame]1720config MSM_PROC_COMM_REGULATOR
Gregory Bean1963a2a2010-08-28 10:05:44 -0700[diff] [blame]1721 bool
Justin Pauporea6cd2092011-06-22 16:19:45 -0700[diff] [blame]1722 depends on MSM_PROC_COMM && REGULATOR
1723 help
1724 Enable regulator framework support for regulators managed by PMLIB
1725 on the modem, and controlled through proccomm calls.
1726
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1727config MSM_VREG_SWITCH_INVERTED
1728 bool "Reverse vreg switch polarity"
1729 default n
1730 help
1731 Reverses the enable and disable for vreg switch.
1732
1733config MSM_DMA_TEST
1734 tristate "MSM DMA test module"
1735 default m
1736 help
1737 Intended to be compiled as a module. Provides a device node
1738 and ioctls for testing the MSM dma system.
1739
1740config WIFI_CONTROL_FUNC
1741 bool "Enable WiFi control function abstraction"
1742 help
1743 Enables Power/Reset/Carddetect function abstraction
1744
1745config WIFI_MEM_PREALLOC
1746 depends on WIFI_CONTROL_FUNC
1747 bool "Preallocate memory for WiFi buffers"
1748 help
1749 Preallocates memory buffers for WiFi driver
1750
1751config QSD_AUDIO
1752 bool "QSD audio"
1753 depends on ARCH_MSM_SCORPION && MSM_DALRPC && ANDROID_PMEM && !MSM_SMP
1754 default y
1755 help
1756 Provides PCM, MP3, and AAC audio playback.
1757
1758config AUDIO_AAC_PLUS
1759 depends on (MSM_ADSP || QSD_AUDIO || MSM7KV2_AUDIO)
1760 bool "AAC+ Audio"
1761 default y
1762 help
1763 Provides AAC+ decoding
1764
1765config AUDIO_ENHANCED_AAC_PLUS
1766 depends on AUDIO_AAC_PLUS
1767 bool "Enhanced AAC+ Audio"
1768 default y
1769 help
1770 Provides Enhanced AAC+ decoding
1771
1772config SURF_FFA_GPIO_KEYPAD
1773 bool "MSM SURF/FFA GPIO keypad"
1774 depends on INPUT_GPIO = "y"
1775 default y
1776 help
1777 Select if the GPIO keypad is attached.
1778
1779config MSM_SLEEP_TIME_OVERRIDE
1780 bool "Allow overriding suspend/sleep time with PM module parameter"
1781 default y
1782 help
1783 Enable the module parameter sleep_time_override. Specified
1784 in units of seconds, it overwrites the normal sleep time of
1785 suspend. The feature is required for automated power management
1786 testing.
1787
1788config MSM_MEMORY_LOW_POWER_MODE
1789 bool "Control the low power modes of memory"
1790 default n
1791 help
1792 The application processor controls whether memory should enter
1793 which low power mode.
1794
1795choice
1796 prompt "Default Memory Low Power Mode during Idle"
1797 depends on MSM_MEMORY_LOW_POWER_MODE
1798 default MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
1799 help
1800 Selects the default low power mode of the memory during idle
1801 sleep.
1802
1803 config MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
1804 bool "Memory active"
1805
1806 config MSM_MEMORY_LOW_POWER_MODE_IDLE_RETENTION
1807 bool "Memory in retention"
1808
1809 config MSM_MEMORY_LOW_POWER_MODE_IDLE_DEEP_POWER_DOWN
1810 bool "Memory in deep power down"
1811endchoice
1812
1813choice
1814 prompt "Default Memory Low Power Mode during Suspend"
1815 depends on MSM_MEMORY_LOW_POWER_MODE
1816 default MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
1817 help
1818 Selects the default low power mode of the memory during suspend
1819 sleep.
1820
1821 config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
1822 bool "Memory active"
1823
1824 config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_RETENTION
1825 bool "Memory in retention"
1826
1827 config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_DEEP_POWER_DOWN
1828 bool "Memory in deep power down"
1829endchoice
1830
1831choice
1832 prompt "Power management timeout action"
1833 default MSM_PM_TIMEOUT_HALT
1834 help
1835 Selects the Application Processor's action when Power Management
1836 times out waiting for Modem's handshake.
1837
1838 config MSM_PM_TIMEOUT_HALT
1839 bool "Halt the Application Processor"
1840
1841 config MSM_PM_TIMEOUT_RESET_MODEM
1842 bool "Reset the Modem Processor"
1843
1844 config MSM_PM_TIMEOUT_RESET_CHIP
1845 bool "Reset the entire chip"
1846endchoice
1847
1848config MSM_IDLE_WAIT_ON_MODEM
1849 int "Wait for Modem to become ready for idle power collapse"
1850 default 0
1851 help
1852 If Modem is not ready to handle Application Processor's request
1853 for idle power collapse, wait the number of microseconds in case
1854 Modem becomes ready soon.
1855
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]1856config MSM_RPM_REGULATOR
1857 bool "RPM regulator driver"
Matt Wagantall32dc71e2012-01-04 11:13:11 -0800[diff] [blame]1858 depends on MSM_RPM && REGULATOR
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]1859 help
1860 Compile in support for the RPM regulator driver, used for setting
1861 voltages and other parameters of the various power rails supplied
1862 by some Qualcomm PMICs.
1863
David Collinsc7642322012-04-04 10:19:12 -0700[diff] [blame]1864config MSM_RPM_REGULATOR_SMD
1865 bool "SMD RPM regulator driver"
1866 depends on REGULATOR
1867 depends on OF
1868 depends on MSM_RPM_SMD
1869 help
1870 Compile in support for the SMD RPM regulator driver which is used for
1871 setting voltages and other parameters of the various power rails
1872 supplied by some Qualcomm PMICs. The SMD RPM regulator driver should
1873 be used on systems which contain an RPM which communicates with the
1874 application processor over SMD.
1875
Stephen Boyd705ff472012-07-09 13:40:05 -0700[diff] [blame^]1876config MSM_SUBSYSTEM_RESTART
1877 bool "MSM Subsystem Restart"
1878 help
1879 This option enables the MSM subsystem restart framework.
1880
1881 The MSM subsystem restart framework provides support to boot,
1882 shutdown, and restart subsystems with a reference counted API.
1883 It also notifies userspace of transitions between these states via
1884 sysfs.
1885
1886config MSM_SYSMON_COMM
1887 bool "MSM System Monitor communication support"
1888 depends on MSM_SMD && MSM_SUBSYSTEM_RESTART
1889 help
1890 This option adds support for MSM System Monitor library, which
1891 provides an API that may be used for notifying subsystems within
1892 the SoC about other subsystems' power-up/down state-changes.
1893
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1894config MSM_PIL
1895 bool "Peripheral image loading"
1896 select FW_LOADER
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1897 default n
1898 help
1899 Some peripherals need to be loaded into memory before they can be
1900 brought out of reset.
1901
1902 Say yes to support these devices.
1903
Stephen Boyd4eb885b2011-09-29 01:16:03 -0700[diff] [blame]1904config MSM_PIL_MODEM
1905 tristate "Modem (ARM11) Boot Support"
1906 depends on MSM_PIL
1907 help
1908 Support for booting and shutting down ARM11 Modem processors.
1909
Stephen Boyd3acc9e42011-09-28 16:46:40 -0700[diff] [blame]1910config MSM_PIL_QDSP6V3
1911 tristate "QDSP6v3 (Hexagon) Boot Support"
1912 depends on MSM_PIL
1913 help
1914 Support for booting and shutting down QDSP6v3 processors (hexagon).
1915 The QDSP6 is a low power DSP used in audio software applications.
1916
Stephen Boydeb819882011-08-29 14:46:30 -0700[diff] [blame]1917config MSM_PIL_QDSP6V4
1918 tristate "QDSP6v4 (Hexagon) Boot Support"
1919 depends on MSM_PIL
1920 help
1921 Support for booting and shutting down QDSP6v4 processors (hexagon).
1922 The QDSP6 is a low power DSP used in audio, modem firmware, and modem
1923 software applications.
1924
Matt Wagantallc2bbdc32012-03-21 19:44:50 -0700[diff] [blame]1925config MSM_PIL_LPASS_QDSP6V5
1926 tristate "LPASS QDSP6v5 (Hexagon) Boot Support"
1927 depends on MSM_PIL
1928 help
Matt Wagantall4e2599e2012-03-21 22:31:35 -0700[diff] [blame]1929 Support for booting and shutting down QDSP6v5 (Hexagon) processors
1930 in low power audio subsystems.
1931
1932config MSM_PIL_MSS_QDSP6V5
1933 tristate "MSS QDSP6v5 (Hexagon) Boot Support"
1934 depends on MSM_PIL
1935 help
1936 Support for booting and shutting down QDSP6v5 (Hexagon) processors
1937 in modem subsystems.
Matt Wagantallc2bbdc32012-03-21 19:44:50 -0700[diff] [blame]1938
Matt Wagantalle6e00d52012-03-08 17:39:07 -0800[diff] [blame]1939config MSM_PIL_MBA
1940 tristate "Support for modem self-authentication"
1941 depends on MSM_PIL_MSS_QDSP6V5
1942 help
1943 Support for booting self-authenticating modems using the Modem Boot
1944 Authenticator.
Stephen Boyd322a9922011-09-20 01:05:54 -0700[diff] [blame]1945
1946config MSM_PIL_RIVA
Stephen Boydd89eebe2011-09-28 23:28:11 -0700[diff] [blame]1947 tristate "RIVA (WCNSS) Boot Support"
1948 depends on MSM_PIL
1949 help
1950 Support for booting and shutting down the RIVA processor (WCNSS).
1951 Riva is the wireless subsystem processor used in bluetooth, wireless
1952 LAN, and FM software applications.
1953
1954config MSM_PIL_TZAPPS
1955 tristate "TZApps Boot Support"
1956 depends on MSM_PIL
Stephen Boyd25c4a0b2011-09-20 00:12:36 -0700[diff] [blame]1957 help
1958 Support for booting and shutting down TZApps.
1959
1960 TZApps is an image that runs in the secure processor state. It is
1961 used to decrypt data and perform secure operations on the behalf of
1962 the kernel.
1963
1964config MSM_PIL_DSPS
1965 tristate "DSPS Boot Support"
Stephen Boyd7b973de2012-03-09 12:26:16 -0800[diff] [blame]1966 depends on MSM_PIL
1967 help
1968 Support for booting and shutting down ARM7 DSPS processors.
1969
1970 DSPS is a sensors offloading processor used for applications such
1971 as rotation detection, temperature, etc.
Matt Wagantall292aace2012-01-26 19:12:34 -0800[diff] [blame]1972
1973config MSM_PIL_VIDC
1974 tristate "Video Core Secure Boot Support"
1975 depends on MSM_PIL
1976 help
1977 Support for authenticating the video core image.
1978
Tianyi Gou828798d2012-05-02 21:12:38 -0700[diff] [blame]1979config MSM_PIL_VENUS
1980 tristate "VENUS (Video) Boot Support"
1981 depends on MSM_PIL
1982 help
1983 Support for booting and shutting down the VENUS processor (Video).
1984 Venus is the Video subsystem processor used for video codecs.
1985
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1986config MSM_PIL_GSS
1987 tristate "GSS (Coretx A5) Boot Support"
1988 depends on MSM_PIL
1989 help
1990 Support for booting and shutting down Cortex A5 processors which run
1991 GPS subsystem firmware.
Rohit Vaswani56dd22a2011-11-11 16:21:28 -0800[diff] [blame]1992
Tianyi Gouc1e049f82011-11-23 14:20:16 -0800[diff] [blame]1993config MSM_PIL_PRONTO
1994 tristate "PRONTO (WCNSS) Boot Support"
1995 depends on MSM_PIL
1996 help
1997 Support for booting and shutting down the PRONTO processor (WCNSS).
1998 PRONTO is the wireless subsystem processor used in bluetooth, wireless
1999 LAN, and FM software applications.
2000
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2001config MSM_SCM
2002 bool "Secure Channel Manager (SCM) support"
2003 default n
2004
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2005config MSM_MODEM_8960
2006 bool "MSM 8960 Modem driver"
Rohit Vaswani56dd22a2011-11-11 16:21:28 -0800[diff] [blame]2007 depends on (ARCH_MSM8960 || ARCH_MSM9615)
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2008 help
Rohit Vaswani56dd22a2011-11-11 16:21:28 -0800[diff] [blame]2009 This option enables the modem driver for the MSM8960 and MSM9615, which monitors
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2010 modem hardware watchdog interrupt lines and plugs into the subsystem
Rohit Vaswani56dd22a2011-11-11 16:21:28 -0800[diff] [blame]2011 restart and PIL drivers. For MSM9615, it only supports a full chip reset.
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2012
Bharath Ramachandramurthyff061c72011-06-27 14:22:33 -0700[diff] [blame]2013config MSM_LPASS_8960
2014 tristate "MSM 8960 Lpass driver"
Rohit Vaswani56dd22a2011-11-11 16:21:28 -0800[diff] [blame]2015 depends on (ARCH_MSM8960 || ARCH_MSM9615)
Bharath Ramachandramurthyff061c72011-06-27 14:22:33 -0700[diff] [blame]2016 help
Rohit Vaswani56dd22a2011-11-11 16:21:28 -0800[diff] [blame]2017 This option enables the lpass driver for the MSM8960 and MSM9615. This monitors
Bharath Ramachandramurthyff061c72011-06-27 14:22:33 -0700[diff] [blame]2018 lpass hardware watchdog interrupt lines and plugs into the subsystem
Rohit Vaswani56dd22a2011-11-11 16:21:28 -0800[diff] [blame]2019 restart and PIL drivers. For MSM9615, it only supports a full chip reset.
Bharath Ramachandramurthyff061c72011-06-27 14:22:33 -0700[diff] [blame]2020
Ankur Nandwanie258cf02011-08-19 10:16:38 -0700[diff] [blame]2021config MSM_WCNSS_SSR_8960
2022 tristate "MSM 8960 WCNSS restart module"
2023 depends on (ARCH_MSM8960)
2024 help
2025 This option enables the WCNSS restart module for MSM8960, which
2026 monitors WCNSS hardware watchdog interrupt lines and plugs WCNSS
2027 into the subsystem restart framework.
2028
Rohit Vaswanid0fb4182012-03-19 18:07:59 -0700[diff] [blame]2029config MSM_GSS_SSR_8064
2030 bool "MSM 8064 GSS restart driver"
2031 depends on (ARCH_APQ8064)
2032 help
2033 This option enables the gps subsystem restart driver for APQ8064, which monitors
2034 gss hardware watchdog interrupt lines and plugs into the subsystem
2035 restart and PIL drivers.
2036
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2037config SCORPION_Uni_45nm_BUG
2038 bool "Scorpion Uni 45nm(SC45U): Workaround for ICIMVAU and BPIMVA"
2039 depends on ARCH_MSM7X30 || (ARCH_QSD8X50 && MSM_SOC_REV_A)
2040 default y
2041 help
2042 Invalidating the Instruction Cache by Modified Virtual Address to PoU and
2043 invalidating the Branch Predictor Array by Modified Virtual Address can
2044 create invalid entries in the TLB with the wrong ASID values on Scorpion
2045 Uniprocessor 45nm (SC45U) cores. This option enables the recommended software
2046 workaround for Scorpion Uniprocessor 45nm cores.
2047
2048 This bug is not applicable to any ScorpionMP or Scorpion Uni 65nm(SC65U) cores.
2049
Harini Jayaramanef7805f2011-09-28 12:45:31 -0600[diff] [blame]2050config MSM_BUSPM_DEV
2051 tristate "MSM Bus Performance Monitor Kernel Module"
2052 depends on (ARCH_MSM8X60 || ARCH_MSM8960)
2053 default m
2054 help
2055 This kernel module is used to mmap() hardware registers for the
2056 performance monitors, counters, etc. The module can also be used to
2057 allocate physical memory which is used by bus performance hardware to
2058 dump performance data.
2059
Mona Hossain11c03ac2011-10-26 12:42:10 -0700[diff] [blame]2060config MSM_TZ_LOG
2061 tristate "MSM Trust Zone (TZ) Log Driver"
2062 depends on DEBUG_FS
2063 help
2064 This option enables a driver with a debugfs interface for messages
2065 produced by the Secure code (Trust zone). These messages provide
2066 diagnostic information about TZ operation.
2067
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2068config MSM_RPM_LOG
2069 tristate "MSM Resource Power Manager Log Driver"
2070 depends on DEBUG_FS
Praveen Chidambaram7a712232011-10-28 13:39:45 -0600[diff] [blame]2071 depends on MSM_RPM
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2072 default n
2073 help
2074 This option enables a driver which can read from a circular buffer
2075 of messages produced by the RPM. These messages provide diagnostic
2076 information about RPM operation. The driver outputs the messages
2077 via a debugfs node.
2078
2079config MSM_RPM_STATS_LOG
2080 tristate "MSM Resource Power Manager Stat Driver"
2081 depends on DEBUG_FS
Praveen Chidambaram7a712232011-10-28 13:39:45 -0600[diff] [blame]2082 depends on MSM_RPM
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2083 default n
2084 help
2085 This option enables a driver which reads RPM messages from a shared
2086 memory location. These messages provide statistical information about
2087 the low power modes that RPM enters. The drivers outputs the message
2088 via a debugfs node.
2089
Girish Mahadevan898c56d2012-06-05 16:09:19 -0600[diff] [blame]2090config MSM_RPM_RBCPR_STATS_LOG
2091 tristate "MSM Resource Power Manager RPBCPR Stat Driver"
2092 depends on DEBUG_FS
2093 depends on MSM_RPM
2094 help
2095 This option enables a driver which reads RPM messages from a shared
2096 memory location. These messages provide statistical information about
2097 RBCPR (Rapid Bridge Core Power Reduction) information . The drivers
2098 outputs the message via a debugfs node.
2099
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2100config MSM_DIRECT_SCLK_ACCESS
2101 bool "Direct access to the SCLK timer"
2102 default n
2103
2104config IOMMU_API
2105 bool
Gregory Bean1963a2a2010-08-28 10:05:44 -0700[diff] [blame]2106
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2107config MSM_GPIOMUX
2108 bool
2109
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2110config MSM_SECURE_IO
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2111 bool
Stepan Moskovchenko0ab847452010-11-12 19:29:57 -0800[diff] [blame]2112
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2113config MSM_NATIVE_RESTART
Stephen Boyd2a1eb582010-08-27 10:01:23 -0700[diff] [blame]2114 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2115
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]2116config MSM_MODEM_RESTART
2117 bool
2118
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]2119config MSM_PM2
2120 depends on PM
2121 bool
2122
2123config MSM_PM8X60
2124 depends on PM
2125 bool
2126
2127config MSM_NOPM
2128 default y if !PM
2129 bool
2130
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2131config MSM_BUS_SCALING
2132 bool "Bus scaling driver"
2133 default n
2134
Gagan Mac85c70492011-06-10 16:07:47 -0600[diff] [blame]2135config MSM_BUS_RPM_MULTI_TIER_ENABLED
2136 bool "RPM Multi-tiering Configuration"
2137 depends on MSM_BUS_SCALING
2138
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2139config MSM_WATCHDOG
2140 bool "MSM Watchdog Support"
Rohit Vaswanie897f842012-03-19 14:19:34 -0700[diff] [blame]2141 depends on ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM9615 || ARCH_FSM9XXX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2142 help
2143 This enables the watchdog as is present on 8x60. Currently we use
2144 core 0's watchdog, and reset the entire SoC if it times out. It does
2145 not run during the bootup process, so it will not catch any early
2146 lockups.
2147
Hanumant Singhd1f01022012-07-05 14:21:53 -0700[diff] [blame]2148config MSM_WATCHDOG_V2
2149 bool "MSM Watchdog Support"
2150 help
2151 This enables the watchdog module. It causes kernel panic if the
2152 watchdog times out. It allows for detection of cpu hangs and
2153 deadlocks. It does not run during the bootup process, so it will
2154 not catch any early lockups.
2155
Hanumant Singh5e2541c2012-07-31 14:41:14 -0700[diff] [blame]2156config MSM_MEMORY_DUMP
2157 bool "MSM Memory Dump Support"
2158 help
2159 This enables memory dump feature. It allows various client
2160 subsystems to register respective dump regions. At the time
2161 of deadlocks or cpu hangs these dump regions are captured to
2162 give a snapshot of the system at the time of the crash.
2163
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2164config MSM_DLOAD_MODE
2165 bool "Enable download mode on crashes"
Rohit Vaswani92b071a2011-10-18 20:10:09 -0700[diff] [blame]2166 depends on ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM9615
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2167 default n
2168 help
2169 This makes the SoC enter download mode when it resets
2170 due to a kernel panic. Note that this doesn't by itself
2171 make the kernel reboot on a kernel panic - that must be
2172 enabled via another mechanism.
2173
Pratik Patel17f3b822011-11-21 12:41:47 -0800[diff] [blame]2174config MSM_JTAG
Pratik Patel2963de42012-05-17 12:43:40 -0700[diff] [blame]2175 bool "JTAG and kernel debug and trace support across power collapse"
Jaeseong GIMbc7be592012-09-14 11:23:19 +0900[diff] [blame]2176 default n
Pratik Patelfd6f56a2011-10-10 17:47:55 -0700[diff] [blame]2177 help
Pratik Patel2963de42012-05-17 12:43:40 -0700[diff] [blame]2178 Enables support for kernel debugging (specifically breakpoints) and
2179 processor tracing across power collapse both for JTag and OS hosted
2180 software running on the target. Enabling this will ensure debug
2181 and ETM registers are saved and restored across power collapse.
2182
2183 For production builds, you should probably say 'N' here to avoid
2184 potential power, performance and memory penalty.
Pratik Patel7831c082011-06-08 21:44:37 -0700[diff] [blame]2185
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2186config MSM_ETM
2187 tristate "Enable MSM ETM and ETB"
Pratik Patel17f3b822011-11-21 12:41:47 -0800[diff] [blame]2188 depends on ARCH_MSM8X60
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2189 help
Pratik Patel17f3b822011-11-21 12:41:47 -0800[diff] [blame]2190 Enables embedded trace collection on MSM8660
Pratik Patel7831c082011-06-08 21:44:37 -0700[diff] [blame]2191
Lynus Vazdde09ee2012-01-05 13:28:22 +0530[diff] [blame]2192config MSM_SLEEP_STATS_DEVICE
2193 bool "Enable exporting of MSM sleep device stats to userspace"
2194
Krishna Vanka7f563ff2012-03-20 22:04:19 +0530[diff] [blame]2195config MSM_RUN_QUEUE_STATS
2196 bool "Enable collection and exporting of MSM Run Queue stats to userspace"
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]2197 depends on (MSM_SOC_REV_A || ARCH_MSM8X60 || ARCH_MSM8960)
2198 help
2199 This option enalbes statistics collection on Run Queue. A daemon
2200 in user mode, called MPDecision will be using this data to decide
2201 on when to switch off/on the other cores.
Krishna Vanka7f563ff2012-03-20 22:04:19 +0530[diff] [blame]2202
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2203config MSM_STANDALONE_POWER_COLLAPSE
2204 bool "Enable standalone power collapse"
2205 default n
2206
2207config MSM_GSBI9_UART
2208 bool "Enable GSBI9 UART device"
2209 default n
2210 help
2211 This enables GSBI9 configured into UART.
2212
2213config MSM_SHARED_GPIO_FOR_UART2DM
2214 bool "Use shared GPIOs into UART mode"
2215 depends on (ARCH_MSM7X27A && !MMC_MSM_SDC3_8_BIT_SUPPORT && !MMC_MSM_SDC4_SUPPORT)
2216 help
2217 This option configures GPIO muxed with SDC4/MMC3
2218 8-bit mode into UART mode. It is used for serial
2219 console on UART2DM. Say Y if you want to have
2220 serial console on UART2DM.
2221
2222config MSM_SHOW_RESUME_IRQ
2223 bool "Enable logging of interrupts that could have caused resume"
Bryan Huntsmancc147032011-11-23 13:03:56 -0800[diff] [blame]2224 depends on (ARM_GIC || PMIC8058)
2225 default y if PMIC8058
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2226 default n
2227 help
2228 This option logs wake up interrupts that have triggered just before
2229 the resume loop unrolls. Say Y if you want to debug why the system
2230 resumed.
2231
2232config BT_MSM_PINTEST
2233 tristate "MSM Bluetooth Pin Connectivity Test"
2234 depends on ((ARCH_MSM8X60 || ARCH_MSM7X27A) && DEBUG_FS)
2235 default n
2236 help
2237 Bluetooth MSM Pin Connectivity test module.
2238 This driver provides support for verifying the MSM to BT pin
2239 connectivity.
2240
2241config MSM_FAKE_BATTERY
2242 depends on POWER_SUPPLY
2243 default n
2244 bool "MSM Fake Battery"
2245 help
2246 Enables MSM fake battery driver.
2247
2248config MSM_QDSP6_APR
2249 bool "Audio QDSP6 APR support"
2250 depends on MSM_SMD
2251 default n
2252 help
2253 Enable APR IPC protocol support between
2254 application processor and QDSP6. APR is
2255 used by audio driver to configure QDSP6's
2256 ASM, ADM and AFE.
2257
Joonwoo Park91d95462012-08-02 10:55:54 -0700[diff] [blame]2258config MSM_QDSP6_APRV2
2259 bool "Audio QDSP6 APRv2 support"
2260 depends on MSM_SMD
2261 default n
2262 help
2263 Enable APRv2 IPC protocol support between
2264 application processor and QDSP6. APR is
2265 used by audio driver to configure QDSP6's
2266 ASM, ADM and AFE.
2267
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]2268config MSM_QDSP6_CODECS
2269 bool "Audio Codecs on QDSP6 APR "
2270 depends on MSM_SMD
2271 default n
2272 help
2273 Enable Audio codecs with APR IPC protocol support between
2274 application processor and QDSP6. APR is
2275 used by audio driver to configure QDSP6's
2276 ASM, ADM and AFE.
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2277
Harmandeep Singhe5ddfe32012-05-26 09:39:25 -0700[diff] [blame]2278config MSM_QDSP6V2_CODECS
2279 bool "Audio QDSP6V2 APR support"
2280 depends on MSM_SMD
2281 help
2282 Enable Audio codecs with APR IPC protocol support between
2283 application processor and QDSP6 for B-family. APR is
2284 used by audio driver to configure QDSP6's
2285 ASM, ADM and AFE.
2286
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2287config MSM_AUDIO_QDSP6
2288 bool "QDSP6 HW Audio support"
2289 select SND_SOC_MSM_QDSP6_INTF
2290 default n
2291 help
2292 Enable HW audio support in QDSP6.
2293 QDSP6 can support HW encoder & decoder and audio processing
2294
Harmandeep Singhe5ddfe32012-05-26 09:39:25 -0700[diff] [blame]2295config MSM_AUDIO_QDSP6V2
2296 bool "QDSP6V2 HW Audio support"
2297 select SND_SOC_MSM_QDSP6V2_INTF
2298 help
2299 Enable HW audio support in QDSP6V2.
2300 QDSP6V2 can support HW encoder & decoder and
2301 audio processing. It will enable support for
2302 AAC, AMRNB, AMRWB, EVRC, MP3, QCELP among
2303 others.
2304
Joonwoo Park4a14a552012-08-02 11:03:21 -0700[diff] [blame]2305config MSM_ADSP_LOADER
2306 tristate "ADSP loader support"
2307 select SND_SOC_MSM_APRV2_INTF
2308 depends on MSM_AUDIO_QDSP6V2 && m
2309 help
2310 Enable ADSP image loader.
2311 The ADSP loader brings ADSP out of reset
2312 for the platforms that use APRv2.
2313 Say M if you want to enable this module.
2314
Baruch Eruchimovitche9cbfc12011-10-09 19:47:08 +0200[diff] [blame]2315config MSM_ULTRASOUND
2316 bool "MSM ultrasound support"
2317 depends on MSM_AUDIO_QDSP6
2318 help
2319 Enable support for qdsp6/ultrasound.
2320
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2321config MSM_RPC_VIBRATOR
2322 bool "RPC based MSM Vibrator Support"
2323 depends on MSM_ONCRPCROUTER
2324 help
2325 Enable the vibrator support on MSM over RPC. The vibrator
2326 is connected on the PMIC. Say Y if you want to enable this
2327 feature.
2328
2329config PM8XXX_RPC_VIBRATOR
2330 bool "RPC based Vibrator on PM8xxx PMICs"
2331 depends on MSM_RPC_VIBRATOR
2332 help
2333 Enable the vibrator support on MSM over RPC. The vibrator
2334 is connected on the PM8XXX PMIC. Say Y if you want to enable
2335 this feature.
2336
2337config MSM_SPM_V1
2338 bool "Driver support for SPM Version 1"
2339 help
2340 Enables the support for Version 1 of the SPM driver. SPM hardware is
2341 used to manage the processor power during sleep. The driver allows
2342 configuring SPM to allow different power modes.
2343
2344config MSM_SPM_V2
2345 bool "Driver support for SPM Version 2"
2346 help
2347 Enables the support for Version 2 of the SPM driver. SPM hardware is
2348 used to manage the processor power during sleep. The driver allows
2349 configuring SPM to allow different power modes.
2350
2351config MSM_L2_SPM
2352 bool "SPM support for L2 cache"
2353 depends on MSM_SPM_V2
2354 help
2355 Enable SPM driver support for L2 cache. Some MSM chipsets allow
2356 control of L2 cache low power mode with a Subsystem Power manager.
2357 Enabling this driver allows configuring L2 SPM for low power modes
2358 on supported chipsets.
2359
Laura Abbott2d1760b2011-09-29 21:31:24 -0700[diff] [blame]2360config MSM_MULTIMEDIA_USE_ION
2361 bool "Multimedia suport using Ion"
2362 depends on ION_MSM
2363 help
2364 Enable support for multimedia drivers using Ion for buffer management
2365 instead of pmem. Selecting this may also involve userspace
2366 dependencies as well.
2367
Naveen Ramaraj51f5e8b2012-04-09 15:58:40 -0700[diff] [blame]2368config MSM_OCMEM
2369 bool "MSM On-Chip memory driver (OCMEM)"
2370 help
2371 Enable support for On-Chip Memory available on certain MSM chipsets.
2372 OCMEM is a low latency, high performance pool shared by subsystems.
2373
Naveen Ramaraj99b07562012-05-28 20:57:09 -0700[diff] [blame]2374config MSM_OCMEM_LOCAL_POWER_CTRL
2375 bool "OCMEM Local Power Control"
2376 depends on MSM_OCMEM
2377 help
2378 Enable direct power management of the OCMEM core by the
2379 OCMEM driver. By default power management is delegated to
2380 the RPM. Selecting this option causes the OCMEM driver to
2381 directly handle the various macro power transitions.
2382
2383config MSM_OCMEM_DEBUG
2384 bool "OCMEM Debug Support"
2385 depends on MSM_OCMEM
2386 help
2387 Enable debug options for On-chip Memory (OCMEM) driver.
2388 Various debug options include memory, power and latency.
2389 Choosing one of these options allows debugging of each
2390 individual subsystem separately.
2391
2392config MSM_OCMEM_POWER_DEBUG
2393 bool "OCMEM Power Debug Support"
2394 depends on MSM_OCMEM_DEBUG
2395 help
2396 Enable debug support for OCMEM power management.
2397 This adds support for verifying all power management
2398 related operations of OCMEM. Both local power management
2399 and RPM assisted power management operations are supported.
2400
Naveen Ramaraj4b1d9392012-08-06 21:05:14 -0700[diff] [blame]2401config MSM_OCMEM_POWER_DISABLE
2402 bool "OCMEM Disable Power Control"
2403 depends on MSM_OCMEM_DEBUG
2404 help
2405 Disable all OCMEM power management.
2406 This keeps all OCMEM macros turned ON at all times thus
2407 never allowing them to be turned OFF. Both local power
2408 management and RPM assisted power modes are supported.
2409
Laura Abbottad340ff2012-01-04 14:23:48 -0800[diff] [blame]2410config MSM_RTB
2411 bool "Register tracing"
2412 help
2413 Add support for logging different events to a small uncached
2414 region. This is designed to aid in debugging reset cases where the
2415 caches may not be flushed before the target resets.
2416
2417config MSM_RTB_SEPARATE_CPUS
2418 bool "Separate entries for each cpu"
2419 depends on MSM_RTB
Laura Abbott9959f982012-02-28 11:30:50 -0800[diff] [blame]2420 depends on SMP
Laura Abbottad340ff2012-01-04 14:23:48 -0800[diff] [blame]2421 help
2422 Under some circumstances, it may be beneficial to give dedicated space
2423 for each cpu to log accesses. Selecting this option will log each cpu
2424 separately. This will guarantee that the last acesses for each cpu
2425 will be logged but there will be fewer entries per cpu
2426
Stepan Moskovchenko57884842012-06-07 17:35:49 -0700[diff] [blame]2427config MSM_EBI_ERP
2428 bool "External Bus Interface (EBI) error reporting"
2429 help
2430 Say 'Y' here to enable reporting of external bus interface errors to
2431 the kernel log. Information such as the offending address and
2432 transaction type will be logged. This may be useful for debugging
2433 seemingly broken memory accesses.
2434
2435 For production builds, you should probably say 'N' here.
2436
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2437config MSM_CACHE_ERP
2438 bool "Cache / CPU error reporting"
2439 depends on ARCH_MSM_KRAIT
2440 help
2441 Say 'Y' here to enable reporting of cache and TLB errors to the kernel
2442 log. Enabling this feature can be used as a system debugging technique
2443 if cache corruption is suspected. Cache error statistics will also be
2444 reported in /proc/cpu/msm_cache_erp.
2445
2446 For production builds, you should probably say 'N' here.
2447
2448config MSM_L1_ERR_PANIC
Stepan Moskovchenko1b0c1742012-04-30 14:53:16 -0700[diff] [blame]2449 bool "Panic on L1 cache errors"
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2450 depends on MSM_CACHE_ERP
2451 help
Stepan Moskovchenko1b0c1742012-04-30 14:53:16 -0700[diff] [blame]2452 To cause the kernel to panic whenever an L1 cache error is detected, say
2453 'Y' here. This may be useful as a debugging technique if general system
2454 instability is suspected.
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2455
2456 For production builds, you should probably say 'N' here.
2457
Stepan Moskovchenko7035f652012-05-31 17:48:01 -0700[diff] [blame]2458config MSM_L1_ERR_LOG
2459 bool "Log CPU ERP events to system memory"
2460 depends on MSM_CACHE_ERP
2461 help
2462 Enable logging CPU ERP events to an area of memory that will be
2463 preserved across a system reset. This may be useful for detecting and
2464 troubleshooting ERP-related system crashes in the field.
2465
2466 For production builds, you may want to say 'Y' here.
2467
Stepan Moskovchenkoe9a5dc12012-04-03 20:25:49 -0700[diff] [blame]2468config MSM_L2_ERP_PRINT_ACCESS_ERRORS
2469 bool "Report L2 master port slave/decode errors in kernel log"
2470 depends on MSM_CACHE_ERP
2471 help
2472 Master port errors can occur when a memory request is not properly
2473 handled by the destination slave. This can occur if the destination
2474 register does not exist or is inaccessible due to security
2475 restrictions or (in some cases) clock configuration. Enabling this
2476 option will cause a backtrace to be printed to the kernel log whenever
2477 such an error is encountered. Note that the error is reported as an
2478 interrupt rather than as an exception, meaning that the backtrace may
2479 have some skid. This option may help with debugging, though production
2480 builds should probably say 'N' here.
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2481
2482config MSM_L2_ERP_PORT_PANIC
2483 bool "Panic on L2 master port errors"
Stepan Moskovchenkoe9a5dc12012-04-03 20:25:49 -0700[diff] [blame]2484 depends on MSM_CACHE_ERP && MSM_L2_ERP_PRINT_ACCESS_ERRORS
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2485 help
2486 Master port errors can occur when a memory request is not properly
2487 handled by the destination slave. Enable this option to catch drivers
2488 which attempt to access bad areas of the address space, or access
2489 hardware registers in an improper state (such as certain clocks not
2490 being on). This option may help with debugging, though production
2491 builds should probably say 'N' here.
2492
2493config MSM_L2_ERP_1BIT_PANIC
2494 bool "Panic on recoverable L2 soft errors"
2495 depends on MSM_CACHE_ERP
2496 help
2497 Enable this option to cause a kernel panic whenever the L2 cache
2498 encounters a single-bit (correctable) soft error. This option should
2499 only be enabled when doing low-level debugging where cache corruption
2500 is suspected.
2501
2502 For production builds, you should definitely say 'N' here.
2503
2504config MSM_L2_ERP_2BIT_PANIC
2505 bool "Panic on unrecoverable L2 soft errors"
2506 depends on MSM_CACHE_ERP
2507 help
2508 Enable this option to cause a kernel panic whenever the L2 cache
2509 encounters a double-bit (non-correctable) soft error. Debug builds
2510 will likely benefit from having this option enabled to catch cache
2511 problems as soon as possible.
2512
2513 For production builds, it may be acceptable to say 'N' here, since
2514 an uncorrectable error might not necessarily cause further problems.
Laura Abbottad340ff2012-01-04 14:23:48 -0800[diff] [blame]2515
Praveen Chidambaramf53ef1b2011-12-06 08:27:49 -0700[diff] [blame]2516config MSM_DCVS
2517 bool "Use MSM DCVS for CPU/GPU Frequency control"
2518 depends on MSM_SCM
2519 help
2520 Enable support for MSM DCVS to control all CPU and GPU core frequencies.
2521 The DCVS manager allows idle driver to feed the idle information to the
2522 algorithm and the algorithm returns a frequency for the core which is
2523 passed to the frequency change driver.
2524
Pankaj Kumar32ce1ea2012-04-04 20:29:29 +0530[diff] [blame]2525config MSM_CPR
2526 tristate "Use MSM CPR in S/W mode"
2527 help
2528 Enable CPR (core power reduction) in S/W mode, where the processor
2529 get's the notification from CPR block and programs the PMIC.
2530
2531config MSM_VP_REGULATOR
2532 tristate "Use MSM PMIC8029 C2 regulator"
2533 depends on ARCH_MSM8625
2534 help
2535 Enable MSM PMIC8029 C2 regulator support using APC_PLEVEL access
2536 for MSMs like 8625.
2537
Taniya Dasc43e6872012-03-21 16:41:14 +0530[diff] [blame]2538config HAVE_ARCH_HAS_CURRENT_TIMER
2539 bool
Laura Abbott306bcc22012-03-08 11:24:53 -0800[diff] [blame]2540
2541config MSM_CACHE_DUMP
2542 bool "Cache dumping support"
2543 help
2544 Add infrastructure to dump the L1 and L2 caches to an allocated buffer.
2545 This allows for analysis of the caches in case cache corruption is
2546 suspected.
2547
Laura Abbott7b637362012-03-29 16:43:49 -0700[diff] [blame]2548config MSM_CACHE_DUMP_ON_PANIC
2549 bool "Dump caches on panic"
2550 depends on MSM_CACHE_DUMP
2551 help
2552 By default, the caches are flushed on panic. This means that trying to
2553 look at them in a RAM dump will give useless data. Select this if you
2554 want to dump the L1 and L2 caches on panic before any flush occurs.
2555 If unsure, say N
2556
Jack Phamccbbfab2012-04-09 19:50:20 -0700[diff] [blame]2557config MSM_HSIC_SYSMON
2558 tristate "MSM HSIC system monitor driver"
2559 depends on USB
2560 help
2561 Add support for bridging with the system monitor interface of MDM
2562 over HSIC. This driver allows the local system monitor to
2563 communicate with the remote system monitor interface.
2564
2565config MSM_HSIC_SYSMON_TEST
2566 tristate "MSM HSIC system monitor bridge test"
2567 depends on USB && MSM_HSIC_SYSMON && DEBUG_FS
2568 help
2569 Enable the test hook for the Qualcomm system monitor HSIC driver.
2570 This will create a debugfs file entry named "hsic_sysmon_test" which
2571 can be read and written to send character data to the sysmon port of
2572 the modem over USB.
2573
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2574endif