| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | IBM ServeRAID driver Change Log |
| 2 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 3 | |
| 4 | 5.00.01 - Sarasota ( 5i ) adapters must always be scanned first |
| 5 | - Get rid on IOCTL_NEW_COMMAND code |
| 6 | - Add Extended DCDB Commands for Tape Support in 5I |
| 7 | |
| 8 | 4.90.11 - Don't actually RESET unless it's physically required |
| 9 | - Remove unused compile options |
| 10 | |
| 11 | 4.90.08 - Data Corruption if First Scatter Gather Element is > 64K |
| 12 | |
| 13 | 4.90.08 - Increase Delays in Flashing ( Trombone Only - 4H ) |
| 14 | |
| 15 | 4.90.05 - Use New PCI Architecture to facilitate Hot Plug Development |
| 16 | |
| 17 | 4.90.01 - Add ServeRAID Version Checking |
| 18 | |
| 19 | 4.80.26 - Clean up potential code problems ( Arjan's recommendations ) |
| 20 | |
| 21 | 4.80.21 - Change memcpy() to copy_to_user() in NVRAM Page 5 IOCTL path |
| 22 | |
| 23 | 4.80.20 - Set max_sectors in Scsi_Host structure ( if >= 2.4.7 kernel ) |
| 24 | - 5 second delay needed after resetting an i960 adapter |
| 25 | |
| 26 | 4.80.14 - Take all semaphores off stack |
| 27 | - Clean Up New_IOCTL path |
| 28 | |
| 29 | 4.80.04 - Eliminate calls to strtok() if 2.4.x or greater |
| 30 | - Adjustments to Device Queue Depth |
| 31 | |
| 32 | 4.80.00 - Make ia64 Safe |
| 33 | |
| 34 | 4.72.01 - I/O Mapped Memory release ( so "insmod ips" does not Fail ) |
| 35 | - Don't Issue Internal FFDC Command if there are Active Commands |
| 36 | - Close Window for getting too many IOCTL's active |
| 37 | |
| 38 | 4.72.00 - Allow for a Scatter-Gather Element to exceed MAX_XFER Size |
| 39 | |
| 40 | 4.71.00 - Change all memory allocations to not use GFP_DMA flag |
| 41 | - Code Clean-Up for 2.4.x kernel |
| 42 | |
| 43 | 4.70.15 - Fix Breakup for very large ( non-SG ) requests |
| 44 | |
| 45 | 4.70.13 - Don't release HA Lock in ips_next() until SC taken off queue |
| 46 | - Unregister SCSI device in ips_release() |
| 47 | - Don't Send CDB's if we already know the device is not present |
| 48 | |
| 49 | 4.70.12 - Corrective actions for bad controller ( during initialization ) |
| 50 | |
| 51 | 4.70.09 - Use a Common ( Large Buffer ) for Flashing from the JCRM CD |
| 52 | - Add IPSSEND Flash Support |
| 53 | - Set Sense Data for Unknown SCSI Command |
| 54 | - Use Slot Number from NVRAM Page 5 |
| 55 | - Restore caller's DCDB Structure |
| 56 | |
| 57 | 4.20.14 - Update patch files for kernel 2.4.0-test5 |
| 58 | |
| 59 | 4.20.13 - Fix some failure cases / reset code |
| 60 | - Hook into the reboot_notifier to flush the controller |
| 61 | cache |
| 62 | |
| 63 | 4.20.03 - Rename version to coincide with new release schedules |
| 64 | - Performance fixes |
| 65 | - Fix truncation of /proc files with cat |
| 66 | - Merge in changes through kernel 2.4.0test1ac21 |
| 67 | |
| 68 | 4.10.13 - Fix for dynamic unload and proc file system |
| 69 | |
| 70 | 4.10.00 - Add support for ServeRAID 4M/4L |
| 71 | |
| 72 | 4.00.06 - Fix timeout with initial FFDC command |
| 73 | |
| 74 | 4.00.05 - Remove wish_block from init routine |
| 75 | - Use linux/spinlock.h instead of asm/spinlock.h for kernels |
| 76 | 2.3.18 and later |
| 77 | - Sync with other changes from the 2.3 kernels |
| 78 | |
| 79 | 4.00.04 - Rename structures/constants to be prefixed with IPS_ |
| 80 | |
| 81 | 4.00.03 - Add alternative passthru interface |
| 82 | - Add ability to flash ServeRAID BIOS |
| 83 | |
| 84 | 4.00.02 - Fix problem with PT DCDB with no buffer |
| 85 | |
| 86 | 4.00.01 - Add support for First Failure Data Capture |
| 87 | |
| 88 | 4.00.00 - Add support for ServeRAID 4 |
| 89 | |
| 90 | 3.60.02 - Make DCDB direction based on lookup table. |
| 91 | - Only allow one DCDB command to a SCSI ID at a time. |
| 92 | |
| 93 | 3.60.01 - Remove bogus error check in passthru routine. |
| 94 | |
| 95 | 3.60.00 - Bump max commands to 128 for use with ServeRAID |
| 96 | firmware 3.60. |
| 97 | - Change version to 3.60 to coincide with ServeRAID release |
| 98 | numbering. |
| 99 | |
| 100 | 1.00.00 - Initial Public Release |
| 101 | - Functionally equivalent to 0.99.05 |
| 102 | |
| 103 | 0.99.05 - Fix an oops on certain passthru commands |
| 104 | |
| 105 | 0.99.04 - Fix race condition in the passthru mechanism |
| 106 | -- this required the interface to the utilities to change |
| 107 | - Fix error recovery code |
| 108 | |
| 109 | 0.99.03 - Make interrupt routine handle all completed request on the |
| 110 | adapter not just the first one |
| 111 | - Make sure passthru commands get woken up if we run out of |
| 112 | SCBs |
| 113 | - Send all of the commands on the queue at once rather than |
| 114 | one at a time since the card will support it. |
| 115 | |
| 116 | 0.99.02 - Added some additional debug statements to print out |
| 117 | errors if an error occurs while trying to read/write |
| 118 | to a logical drive (IPS_DEBUG). |
| 119 | |
| 120 | - Fixed read/write errors when the adapter is using an |
| 121 | 8K stripe size. |
| 122 | |