| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* | 
 | 2 |  * | 
 | 3 |  *  Bluetooth driver for the Anycom BlueCard (LSE039/LSE041) | 
 | 4 |  * | 
 | 5 |  *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org> | 
 | 6 |  * | 
 | 7 |  * | 
 | 8 |  *  This program is free software; you can redistribute it and/or modify | 
 | 9 |  *  it under the terms of the GNU General Public License version 2 as | 
 | 10 |  *  published by the Free Software Foundation; | 
 | 11 |  * | 
 | 12 |  *  Software distributed under the License is distributed on an "AS | 
 | 13 |  *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or | 
 | 14 |  *  implied. See the License for the specific language governing | 
 | 15 |  *  rights and limitations under the License. | 
 | 16 |  * | 
 | 17 |  *  The initial developer of the original code is David A. Hinds | 
 | 18 |  *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds | 
 | 19 |  *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved. | 
 | 20 |  * | 
 | 21 |  */ | 
 | 22 |  | 
 | 23 | #include <linux/config.h> | 
 | 24 | #include <linux/module.h> | 
 | 25 |  | 
 | 26 | #include <linux/kernel.h> | 
 | 27 | #include <linux/init.h> | 
 | 28 | #include <linux/slab.h> | 
 | 29 | #include <linux/types.h> | 
 | 30 | #include <linux/sched.h> | 
 | 31 | #include <linux/delay.h> | 
 | 32 | #include <linux/timer.h> | 
 | 33 | #include <linux/errno.h> | 
 | 34 | #include <linux/ptrace.h> | 
 | 35 | #include <linux/ioport.h> | 
 | 36 | #include <linux/spinlock.h> | 
 | 37 | #include <linux/moduleparam.h> | 
 | 38 | #include <linux/wait.h> | 
 | 39 |  | 
 | 40 | #include <linux/skbuff.h> | 
 | 41 | #include <asm/io.h> | 
 | 42 |  | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 43 | #include <pcmcia/cs_types.h> | 
 | 44 | #include <pcmcia/cs.h> | 
 | 45 | #include <pcmcia/cistpl.h> | 
 | 46 | #include <pcmcia/ciscode.h> | 
 | 47 | #include <pcmcia/ds.h> | 
 | 48 | #include <pcmcia/cisreg.h> | 
 | 49 |  | 
 | 50 | #include <net/bluetooth/bluetooth.h> | 
 | 51 | #include <net/bluetooth/hci_core.h> | 
 | 52 |  | 
 | 53 |  | 
 | 54 |  | 
 | 55 | /* ======================== Module parameters ======================== */ | 
 | 56 |  | 
 | 57 |  | 
 | 58 | MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); | 
 | 59 | MODULE_DESCRIPTION("Bluetooth driver for the Anycom BlueCard (LSE039/LSE041)"); | 
 | 60 | MODULE_LICENSE("GPL"); | 
 | 61 |  | 
 | 62 |  | 
 | 63 |  | 
 | 64 | /* ======================== Local structures ======================== */ | 
 | 65 |  | 
 | 66 |  | 
 | 67 | typedef struct bluecard_info_t { | 
 | 68 | 	dev_link_t link; | 
 | 69 | 	dev_node_t node; | 
 | 70 |  | 
 | 71 | 	struct hci_dev *hdev; | 
 | 72 |  | 
 | 73 | 	spinlock_t lock;		/* For serializing operations */ | 
 | 74 | 	struct timer_list timer;	/* For LED control */ | 
 | 75 |  | 
 | 76 | 	struct sk_buff_head txq; | 
 | 77 | 	unsigned long tx_state; | 
 | 78 |  | 
 | 79 | 	unsigned long rx_state; | 
 | 80 | 	unsigned long rx_count; | 
 | 81 | 	struct sk_buff *rx_skb; | 
 | 82 |  | 
 | 83 | 	unsigned char ctrl_reg; | 
 | 84 | 	unsigned long hw_state;		/* Status of the hardware and LED control */ | 
 | 85 | } bluecard_info_t; | 
 | 86 |  | 
 | 87 |  | 
 | 88 | static void bluecard_config(dev_link_t *link); | 
 | 89 | static void bluecard_release(dev_link_t *link); | 
 | 90 | static int bluecard_event(event_t event, int priority, event_callback_args_t *args); | 
 | 91 |  | 
 | 92 | static dev_info_t dev_info = "bluecard_cs"; | 
 | 93 |  | 
 | 94 | static dev_link_t *bluecard_attach(void); | 
 | 95 | static void bluecard_detach(dev_link_t *); | 
 | 96 |  | 
 | 97 | static dev_link_t *dev_list = NULL; | 
 | 98 |  | 
 | 99 |  | 
 | 100 | /* Default baud rate: 57600, 115200, 230400 or 460800 */ | 
 | 101 | #define DEFAULT_BAUD_RATE  230400 | 
 | 102 |  | 
 | 103 |  | 
 | 104 | /* Hardware states */ | 
 | 105 | #define CARD_READY             1 | 
 | 106 | #define CARD_HAS_PCCARD_ID     4 | 
 | 107 | #define CARD_HAS_POWER_LED     5 | 
 | 108 | #define CARD_HAS_ACTIVITY_LED  6 | 
 | 109 |  | 
 | 110 | /* Transmit states  */ | 
 | 111 | #define XMIT_SENDING         1 | 
 | 112 | #define XMIT_WAKEUP          2 | 
 | 113 | #define XMIT_BUFFER_NUMBER   5	/* unset = buffer one, set = buffer two */ | 
 | 114 | #define XMIT_BUF_ONE_READY   6 | 
 | 115 | #define XMIT_BUF_TWO_READY   7 | 
 | 116 | #define XMIT_SENDING_READY   8 | 
 | 117 |  | 
 | 118 | /* Receiver states */ | 
 | 119 | #define RECV_WAIT_PACKET_TYPE   0 | 
 | 120 | #define RECV_WAIT_EVENT_HEADER  1 | 
 | 121 | #define RECV_WAIT_ACL_HEADER    2 | 
 | 122 | #define RECV_WAIT_SCO_HEADER    3 | 
 | 123 | #define RECV_WAIT_DATA          4 | 
 | 124 |  | 
 | 125 | /* Special packet types */ | 
 | 126 | #define PKT_BAUD_RATE_57600   0x80 | 
 | 127 | #define PKT_BAUD_RATE_115200  0x81 | 
 | 128 | #define PKT_BAUD_RATE_230400  0x82 | 
 | 129 | #define PKT_BAUD_RATE_460800  0x83 | 
 | 130 |  | 
 | 131 |  | 
 | 132 | /* These are the register offsets */ | 
 | 133 | #define REG_COMMAND     0x20 | 
 | 134 | #define REG_INTERRUPT   0x21 | 
 | 135 | #define REG_CONTROL     0x22 | 
 | 136 | #define REG_RX_CONTROL  0x24 | 
 | 137 | #define REG_CARD_RESET  0x30 | 
 | 138 | #define REG_LED_CTRL    0x30 | 
 | 139 |  | 
 | 140 | /* REG_COMMAND */ | 
 | 141 | #define REG_COMMAND_TX_BUF_ONE  0x01 | 
 | 142 | #define REG_COMMAND_TX_BUF_TWO  0x02 | 
 | 143 | #define REG_COMMAND_RX_BUF_ONE  0x04 | 
 | 144 | #define REG_COMMAND_RX_BUF_TWO  0x08 | 
 | 145 | #define REG_COMMAND_RX_WIN_ONE  0x00 | 
 | 146 | #define REG_COMMAND_RX_WIN_TWO  0x10 | 
 | 147 |  | 
 | 148 | /* REG_CONTROL */ | 
 | 149 | #define REG_CONTROL_BAUD_RATE_57600   0x00 | 
 | 150 | #define REG_CONTROL_BAUD_RATE_115200  0x01 | 
 | 151 | #define REG_CONTROL_BAUD_RATE_230400  0x02 | 
 | 152 | #define REG_CONTROL_BAUD_RATE_460800  0x03 | 
 | 153 | #define REG_CONTROL_RTS               0x04 | 
 | 154 | #define REG_CONTROL_BT_ON             0x08 | 
 | 155 | #define REG_CONTROL_BT_RESET          0x10 | 
 | 156 | #define REG_CONTROL_BT_RES_PU         0x20 | 
 | 157 | #define REG_CONTROL_INTERRUPT         0x40 | 
 | 158 | #define REG_CONTROL_CARD_RESET        0x80 | 
 | 159 |  | 
 | 160 | /* REG_RX_CONTROL */ | 
 | 161 | #define RTS_LEVEL_SHIFT_BITS  0x02 | 
 | 162 |  | 
 | 163 |  | 
 | 164 |  | 
 | 165 | /* ======================== LED handling routines ======================== */ | 
 | 166 |  | 
 | 167 |  | 
 | 168 | static void bluecard_activity_led_timeout(u_long arg) | 
 | 169 | { | 
 | 170 | 	bluecard_info_t *info = (bluecard_info_t *)arg; | 
 | 171 | 	unsigned int iobase = info->link.io.BasePort1; | 
 | 172 |  | 
 | 173 | 	if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) | 
 | 174 | 		return; | 
 | 175 |  | 
 | 176 | 	if (test_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state))) { | 
 | 177 | 		/* Disable activity LED */ | 
 | 178 | 		outb(0x08 | 0x20, iobase + 0x30); | 
 | 179 | 	} else { | 
 | 180 | 		/* Disable power LED */ | 
 | 181 | 		outb(0x00, iobase + 0x30); | 
 | 182 | 	} | 
 | 183 | } | 
 | 184 |  | 
 | 185 |  | 
 | 186 | static void bluecard_enable_activity_led(bluecard_info_t *info) | 
 | 187 | { | 
 | 188 | 	unsigned int iobase = info->link.io.BasePort1; | 
 | 189 |  | 
 | 190 | 	if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) | 
 | 191 | 		return; | 
 | 192 |  | 
 | 193 | 	if (test_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state))) { | 
 | 194 | 		/* Enable activity LED */ | 
 | 195 | 		outb(0x10 | 0x40, iobase + 0x30); | 
 | 196 |  | 
 | 197 | 		/* Stop the LED after HZ/4 */ | 
 | 198 | 		mod_timer(&(info->timer), jiffies + HZ / 4); | 
 | 199 | 	} else { | 
 | 200 | 		/* Enable power LED */ | 
 | 201 | 		outb(0x08 | 0x20, iobase + 0x30); | 
 | 202 |  | 
 | 203 | 		/* Stop the LED after HZ/2 */ | 
 | 204 | 		mod_timer(&(info->timer), jiffies + HZ / 2); | 
 | 205 | 	} | 
 | 206 | } | 
 | 207 |  | 
 | 208 |  | 
 | 209 |  | 
 | 210 | /* ======================== Interrupt handling ======================== */ | 
 | 211 |  | 
 | 212 |  | 
 | 213 | static int bluecard_write(unsigned int iobase, unsigned int offset, __u8 *buf, int len) | 
 | 214 | { | 
 | 215 | 	int i, actual; | 
 | 216 |  | 
 | 217 | 	actual = (len > 15) ? 15 : len; | 
 | 218 |  | 
 | 219 | 	outb_p(actual, iobase + offset); | 
 | 220 |  | 
 | 221 | 	for (i = 0; i < actual; i++) | 
 | 222 | 		outb_p(buf[i], iobase + offset + i + 1); | 
 | 223 |  | 
 | 224 | 	return actual; | 
 | 225 | } | 
 | 226 |  | 
 | 227 |  | 
 | 228 | static void bluecard_write_wakeup(bluecard_info_t *info) | 
 | 229 | { | 
 | 230 | 	if (!info) { | 
 | 231 | 		BT_ERR("Unknown device"); | 
 | 232 | 		return; | 
 | 233 | 	} | 
 | 234 |  | 
 | 235 | 	if (!test_bit(XMIT_SENDING_READY, &(info->tx_state))) | 
 | 236 | 		return; | 
 | 237 |  | 
 | 238 | 	if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) { | 
 | 239 | 		set_bit(XMIT_WAKEUP, &(info->tx_state)); | 
 | 240 | 		return; | 
 | 241 | 	} | 
 | 242 |  | 
 | 243 | 	do { | 
 | 244 | 		register unsigned int iobase = info->link.io.BasePort1; | 
 | 245 | 		register unsigned int offset; | 
 | 246 | 		register unsigned char command; | 
 | 247 | 		register unsigned long ready_bit; | 
 | 248 | 		register struct sk_buff *skb; | 
 | 249 | 		register int len; | 
 | 250 |  | 
 | 251 | 		clear_bit(XMIT_WAKEUP, &(info->tx_state)); | 
 | 252 |  | 
 | 253 | 		if (!(info->link.state & DEV_PRESENT)) | 
 | 254 | 			return; | 
 | 255 |  | 
 | 256 | 		if (test_bit(XMIT_BUFFER_NUMBER, &(info->tx_state))) { | 
 | 257 | 			if (!test_bit(XMIT_BUF_TWO_READY, &(info->tx_state))) | 
 | 258 | 				break; | 
 | 259 | 			offset = 0x10; | 
 | 260 | 			command = REG_COMMAND_TX_BUF_TWO; | 
 | 261 | 			ready_bit = XMIT_BUF_TWO_READY; | 
 | 262 | 		} else { | 
 | 263 | 			if (!test_bit(XMIT_BUF_ONE_READY, &(info->tx_state))) | 
 | 264 | 				break; | 
 | 265 | 			offset = 0x00; | 
 | 266 | 			command = REG_COMMAND_TX_BUF_ONE; | 
 | 267 | 			ready_bit = XMIT_BUF_ONE_READY; | 
 | 268 | 		} | 
 | 269 |  | 
 | 270 | 		if (!(skb = skb_dequeue(&(info->txq)))) | 
 | 271 | 			break; | 
 | 272 |  | 
 | 273 | 		if (skb->pkt_type & 0x80) { | 
 | 274 | 			/* Disable RTS */ | 
 | 275 | 			info->ctrl_reg |= REG_CONTROL_RTS; | 
 | 276 | 			outb(info->ctrl_reg, iobase + REG_CONTROL); | 
 | 277 | 		} | 
 | 278 |  | 
 | 279 | 		/* Activate LED */ | 
 | 280 | 		bluecard_enable_activity_led(info); | 
 | 281 |  | 
 | 282 | 		/* Send frame */ | 
 | 283 | 		len = bluecard_write(iobase, offset, skb->data, skb->len); | 
 | 284 |  | 
 | 285 | 		/* Tell the FPGA to send the data */ | 
 | 286 | 		outb_p(command, iobase + REG_COMMAND); | 
 | 287 |  | 
 | 288 | 		/* Mark the buffer as dirty */ | 
 | 289 | 		clear_bit(ready_bit, &(info->tx_state)); | 
 | 290 |  | 
 | 291 | 		if (skb->pkt_type & 0x80) { | 
 | 292 | 			DECLARE_WAIT_QUEUE_HEAD(wq); | 
 | 293 | 			DEFINE_WAIT(wait); | 
 | 294 |  | 
 | 295 | 			unsigned char baud_reg; | 
 | 296 |  | 
 | 297 | 			switch (skb->pkt_type) { | 
 | 298 | 			case PKT_BAUD_RATE_460800: | 
 | 299 | 				baud_reg = REG_CONTROL_BAUD_RATE_460800; | 
 | 300 | 				break; | 
 | 301 | 			case PKT_BAUD_RATE_230400: | 
 | 302 | 				baud_reg = REG_CONTROL_BAUD_RATE_230400; | 
 | 303 | 				break; | 
 | 304 | 			case PKT_BAUD_RATE_115200: | 
 | 305 | 				baud_reg = REG_CONTROL_BAUD_RATE_115200; | 
 | 306 | 				break; | 
 | 307 | 			case PKT_BAUD_RATE_57600: | 
 | 308 | 				/* Fall through... */ | 
 | 309 | 			default: | 
 | 310 | 				baud_reg = REG_CONTROL_BAUD_RATE_57600; | 
 | 311 | 				break; | 
 | 312 | 			} | 
 | 313 |  | 
 | 314 | 			/* Wait until the command reaches the baseband */ | 
 | 315 | 			prepare_to_wait(&wq, &wait, TASK_INTERRUPTIBLE); | 
 | 316 | 			schedule_timeout(HZ/10); | 
 | 317 | 			finish_wait(&wq, &wait); | 
 | 318 |  | 
 | 319 | 			/* Set baud on baseband */ | 
 | 320 | 			info->ctrl_reg &= ~0x03; | 
 | 321 | 			info->ctrl_reg |= baud_reg; | 
 | 322 | 			outb(info->ctrl_reg, iobase + REG_CONTROL); | 
 | 323 |  | 
 | 324 | 			/* Enable RTS */ | 
 | 325 | 			info->ctrl_reg &= ~REG_CONTROL_RTS; | 
 | 326 | 			outb(info->ctrl_reg, iobase + REG_CONTROL); | 
 | 327 |  | 
 | 328 | 			/* Wait before the next HCI packet can be send */ | 
 | 329 | 			prepare_to_wait(&wq, &wait, TASK_INTERRUPTIBLE); | 
 | 330 | 			schedule_timeout(HZ); | 
 | 331 | 			finish_wait(&wq, &wait); | 
 | 332 | 		} | 
 | 333 |  | 
 | 334 | 		if (len == skb->len) { | 
 | 335 | 			kfree_skb(skb); | 
 | 336 | 		} else { | 
 | 337 | 			skb_pull(skb, len); | 
 | 338 | 			skb_queue_head(&(info->txq), skb); | 
 | 339 | 		} | 
 | 340 |  | 
 | 341 | 		info->hdev->stat.byte_tx += len; | 
 | 342 |  | 
 | 343 | 		/* Change buffer */ | 
 | 344 | 		change_bit(XMIT_BUFFER_NUMBER, &(info->tx_state)); | 
 | 345 |  | 
 | 346 | 	} while (test_bit(XMIT_WAKEUP, &(info->tx_state))); | 
 | 347 |  | 
 | 348 | 	clear_bit(XMIT_SENDING, &(info->tx_state)); | 
 | 349 | } | 
 | 350 |  | 
 | 351 |  | 
 | 352 | static int bluecard_read(unsigned int iobase, unsigned int offset, __u8 *buf, int size) | 
 | 353 | { | 
 | 354 | 	int i, n, len; | 
 | 355 |  | 
 | 356 | 	outb(REG_COMMAND_RX_WIN_ONE, iobase + REG_COMMAND); | 
 | 357 |  | 
 | 358 | 	len = inb(iobase + offset); | 
 | 359 | 	n = 0; | 
 | 360 | 	i = 1; | 
 | 361 |  | 
 | 362 | 	while (n < len) { | 
 | 363 |  | 
 | 364 | 		if (i == 16) { | 
 | 365 | 			outb(REG_COMMAND_RX_WIN_TWO, iobase + REG_COMMAND); | 
 | 366 | 			i = 0; | 
 | 367 | 		} | 
 | 368 |  | 
 | 369 | 		buf[n] = inb(iobase + offset + i); | 
 | 370 |  | 
 | 371 | 		n++; | 
 | 372 | 		i++; | 
 | 373 |  | 
 | 374 | 	} | 
 | 375 |  | 
 | 376 | 	return len; | 
 | 377 | } | 
 | 378 |  | 
 | 379 |  | 
 | 380 | static void bluecard_receive(bluecard_info_t *info, unsigned int offset) | 
 | 381 | { | 
 | 382 | 	unsigned int iobase; | 
 | 383 | 	unsigned char buf[31]; | 
 | 384 | 	int i, len; | 
 | 385 |  | 
 | 386 | 	if (!info) { | 
 | 387 | 		BT_ERR("Unknown device"); | 
 | 388 | 		return; | 
 | 389 | 	} | 
 | 390 |  | 
 | 391 | 	iobase = info->link.io.BasePort1; | 
 | 392 |  | 
 | 393 | 	if (test_bit(XMIT_SENDING_READY, &(info->tx_state))) | 
 | 394 | 		bluecard_enable_activity_led(info); | 
 | 395 |  | 
 | 396 | 	len = bluecard_read(iobase, offset, buf, sizeof(buf)); | 
 | 397 |  | 
 | 398 | 	for (i = 0; i < len; i++) { | 
 | 399 |  | 
 | 400 | 		/* Allocate packet */ | 
 | 401 | 		if (info->rx_skb == NULL) { | 
 | 402 | 			info->rx_state = RECV_WAIT_PACKET_TYPE; | 
 | 403 | 			info->rx_count = 0; | 
 | 404 | 			if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) { | 
 | 405 | 				BT_ERR("Can't allocate mem for new packet"); | 
 | 406 | 				return; | 
 | 407 | 			} | 
 | 408 | 		} | 
 | 409 |  | 
 | 410 | 		if (info->rx_state == RECV_WAIT_PACKET_TYPE) { | 
 | 411 |  | 
 | 412 | 			info->rx_skb->dev = (void *) info->hdev; | 
 | 413 | 			info->rx_skb->pkt_type = buf[i]; | 
 | 414 |  | 
 | 415 | 			switch (info->rx_skb->pkt_type) { | 
 | 416 |  | 
 | 417 | 			case 0x00: | 
 | 418 | 				/* init packet */ | 
 | 419 | 				if (offset != 0x00) { | 
 | 420 | 					set_bit(XMIT_BUF_ONE_READY, &(info->tx_state)); | 
 | 421 | 					set_bit(XMIT_BUF_TWO_READY, &(info->tx_state)); | 
 | 422 | 					set_bit(XMIT_SENDING_READY, &(info->tx_state)); | 
 | 423 | 					bluecard_write_wakeup(info); | 
 | 424 | 				} | 
 | 425 |  | 
 | 426 | 				kfree_skb(info->rx_skb); | 
 | 427 | 				info->rx_skb = NULL; | 
 | 428 | 				break; | 
 | 429 |  | 
 | 430 | 			case HCI_EVENT_PKT: | 
 | 431 | 				info->rx_state = RECV_WAIT_EVENT_HEADER; | 
 | 432 | 				info->rx_count = HCI_EVENT_HDR_SIZE; | 
 | 433 | 				break; | 
 | 434 |  | 
 | 435 | 			case HCI_ACLDATA_PKT: | 
 | 436 | 				info->rx_state = RECV_WAIT_ACL_HEADER; | 
 | 437 | 				info->rx_count = HCI_ACL_HDR_SIZE; | 
 | 438 | 				break; | 
 | 439 |  | 
 | 440 | 			case HCI_SCODATA_PKT: | 
 | 441 | 				info->rx_state = RECV_WAIT_SCO_HEADER; | 
 | 442 | 				info->rx_count = HCI_SCO_HDR_SIZE; | 
 | 443 | 				break; | 
 | 444 |  | 
 | 445 | 			default: | 
 | 446 | 				/* unknown packet */ | 
 | 447 | 				BT_ERR("Unknown HCI packet with type 0x%02x received", info->rx_skb->pkt_type); | 
 | 448 | 				info->hdev->stat.err_rx++; | 
 | 449 |  | 
 | 450 | 				kfree_skb(info->rx_skb); | 
 | 451 | 				info->rx_skb = NULL; | 
 | 452 | 				break; | 
 | 453 |  | 
 | 454 | 			} | 
 | 455 |  | 
 | 456 | 		} else { | 
 | 457 |  | 
 | 458 | 			*skb_put(info->rx_skb, 1) = buf[i]; | 
 | 459 | 			info->rx_count--; | 
 | 460 |  | 
 | 461 | 			if (info->rx_count == 0) { | 
 | 462 |  | 
 | 463 | 				int dlen; | 
 | 464 | 				struct hci_event_hdr *eh; | 
 | 465 | 				struct hci_acl_hdr *ah; | 
 | 466 | 				struct hci_sco_hdr *sh; | 
 | 467 |  | 
 | 468 | 				switch (info->rx_state) { | 
 | 469 |  | 
 | 470 | 				case RECV_WAIT_EVENT_HEADER: | 
 | 471 | 					eh = (struct hci_event_hdr *)(info->rx_skb->data); | 
 | 472 | 					info->rx_state = RECV_WAIT_DATA; | 
 | 473 | 					info->rx_count = eh->plen; | 
 | 474 | 					break; | 
 | 475 |  | 
 | 476 | 				case RECV_WAIT_ACL_HEADER: | 
 | 477 | 					ah = (struct hci_acl_hdr *)(info->rx_skb->data); | 
 | 478 | 					dlen = __le16_to_cpu(ah->dlen); | 
 | 479 | 					info->rx_state = RECV_WAIT_DATA; | 
 | 480 | 					info->rx_count = dlen; | 
 | 481 | 					break; | 
 | 482 |  | 
 | 483 | 				case RECV_WAIT_SCO_HEADER: | 
 | 484 | 					sh = (struct hci_sco_hdr *)(info->rx_skb->data); | 
 | 485 | 					info->rx_state = RECV_WAIT_DATA; | 
 | 486 | 					info->rx_count = sh->dlen; | 
 | 487 | 					break; | 
 | 488 |  | 
 | 489 | 				case RECV_WAIT_DATA: | 
 | 490 | 					hci_recv_frame(info->rx_skb); | 
 | 491 | 					info->rx_skb = NULL; | 
 | 492 | 					break; | 
 | 493 |  | 
 | 494 | 				} | 
 | 495 |  | 
 | 496 | 			} | 
 | 497 |  | 
 | 498 | 		} | 
 | 499 |  | 
 | 500 |  | 
 | 501 | 	} | 
 | 502 |  | 
 | 503 | 	info->hdev->stat.byte_rx += len; | 
 | 504 | } | 
 | 505 |  | 
 | 506 |  | 
 | 507 | static irqreturn_t bluecard_interrupt(int irq, void *dev_inst, struct pt_regs *regs) | 
 | 508 | { | 
 | 509 | 	bluecard_info_t *info = dev_inst; | 
 | 510 | 	unsigned int iobase; | 
 | 511 | 	unsigned char reg; | 
 | 512 |  | 
 | 513 | 	if (!info || !info->hdev) { | 
 | 514 | 		BT_ERR("Call of irq %d for unknown device", irq); | 
 | 515 | 		return IRQ_NONE; | 
 | 516 | 	} | 
 | 517 |  | 
 | 518 | 	if (!test_bit(CARD_READY, &(info->hw_state))) | 
 | 519 | 		return IRQ_HANDLED; | 
 | 520 |  | 
 | 521 | 	iobase = info->link.io.BasePort1; | 
 | 522 |  | 
 | 523 | 	spin_lock(&(info->lock)); | 
 | 524 |  | 
 | 525 | 	/* Disable interrupt */ | 
 | 526 | 	info->ctrl_reg &= ~REG_CONTROL_INTERRUPT; | 
 | 527 | 	outb(info->ctrl_reg, iobase + REG_CONTROL); | 
 | 528 |  | 
 | 529 | 	reg = inb(iobase + REG_INTERRUPT); | 
 | 530 |  | 
 | 531 | 	if ((reg != 0x00) && (reg != 0xff)) { | 
 | 532 |  | 
 | 533 | 		if (reg & 0x04) { | 
 | 534 | 			bluecard_receive(info, 0x00); | 
 | 535 | 			outb(0x04, iobase + REG_INTERRUPT); | 
 | 536 | 			outb(REG_COMMAND_RX_BUF_ONE, iobase + REG_COMMAND); | 
 | 537 | 		} | 
 | 538 |  | 
 | 539 | 		if (reg & 0x08) { | 
 | 540 | 			bluecard_receive(info, 0x10); | 
 | 541 | 			outb(0x08, iobase + REG_INTERRUPT); | 
 | 542 | 			outb(REG_COMMAND_RX_BUF_TWO, iobase + REG_COMMAND); | 
 | 543 | 		} | 
 | 544 |  | 
 | 545 | 		if (reg & 0x01) { | 
 | 546 | 			set_bit(XMIT_BUF_ONE_READY, &(info->tx_state)); | 
 | 547 | 			outb(0x01, iobase + REG_INTERRUPT); | 
 | 548 | 			bluecard_write_wakeup(info); | 
 | 549 | 		} | 
 | 550 |  | 
 | 551 | 		if (reg & 0x02) { | 
 | 552 | 			set_bit(XMIT_BUF_TWO_READY, &(info->tx_state)); | 
 | 553 | 			outb(0x02, iobase + REG_INTERRUPT); | 
 | 554 | 			bluecard_write_wakeup(info); | 
 | 555 | 		} | 
 | 556 |  | 
 | 557 | 	} | 
 | 558 |  | 
 | 559 | 	/* Enable interrupt */ | 
 | 560 | 	info->ctrl_reg |= REG_CONTROL_INTERRUPT; | 
 | 561 | 	outb(info->ctrl_reg, iobase + REG_CONTROL); | 
 | 562 |  | 
 | 563 | 	spin_unlock(&(info->lock)); | 
 | 564 |  | 
 | 565 | 	return IRQ_HANDLED; | 
 | 566 | } | 
 | 567 |  | 
 | 568 |  | 
 | 569 |  | 
 | 570 | /* ======================== Device specific HCI commands ======================== */ | 
 | 571 |  | 
 | 572 |  | 
 | 573 | static int bluecard_hci_set_baud_rate(struct hci_dev *hdev, int baud) | 
 | 574 | { | 
 | 575 | 	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data); | 
 | 576 | 	struct sk_buff *skb; | 
 | 577 |  | 
 | 578 | 	/* Ericsson baud rate command */ | 
 | 579 | 	unsigned char cmd[] = { HCI_COMMAND_PKT, 0x09, 0xfc, 0x01, 0x03 }; | 
 | 580 |  | 
 | 581 | 	if (!(skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) { | 
 | 582 | 		BT_ERR("Can't allocate mem for new packet"); | 
 | 583 | 		return -1; | 
 | 584 | 	} | 
 | 585 |  | 
 | 586 | 	switch (baud) { | 
 | 587 | 	case 460800: | 
 | 588 | 		cmd[4] = 0x00; | 
 | 589 | 		skb->pkt_type = PKT_BAUD_RATE_460800; | 
 | 590 | 		break; | 
 | 591 | 	case 230400: | 
 | 592 | 		cmd[4] = 0x01; | 
 | 593 | 		skb->pkt_type = PKT_BAUD_RATE_230400; | 
 | 594 | 		break; | 
 | 595 | 	case 115200: | 
 | 596 | 		cmd[4] = 0x02; | 
 | 597 | 		skb->pkt_type = PKT_BAUD_RATE_115200; | 
 | 598 | 		break; | 
 | 599 | 	case 57600: | 
 | 600 | 		/* Fall through... */ | 
 | 601 | 	default: | 
 | 602 | 		cmd[4] = 0x03; | 
 | 603 | 		skb->pkt_type = PKT_BAUD_RATE_57600; | 
 | 604 | 		break; | 
 | 605 | 	} | 
 | 606 |  | 
 | 607 | 	memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd)); | 
 | 608 |  | 
 | 609 | 	skb_queue_tail(&(info->txq), skb); | 
 | 610 |  | 
 | 611 | 	bluecard_write_wakeup(info); | 
 | 612 |  | 
 | 613 | 	return 0; | 
 | 614 | } | 
 | 615 |  | 
 | 616 |  | 
 | 617 |  | 
 | 618 | /* ======================== HCI interface ======================== */ | 
 | 619 |  | 
 | 620 |  | 
 | 621 | static int bluecard_hci_flush(struct hci_dev *hdev) | 
 | 622 | { | 
 | 623 | 	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data); | 
 | 624 |  | 
 | 625 | 	/* Drop TX queue */ | 
 | 626 | 	skb_queue_purge(&(info->txq)); | 
 | 627 |  | 
 | 628 | 	return 0; | 
 | 629 | } | 
 | 630 |  | 
 | 631 |  | 
 | 632 | static int bluecard_hci_open(struct hci_dev *hdev) | 
 | 633 | { | 
 | 634 | 	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data); | 
 | 635 | 	unsigned int iobase = info->link.io.BasePort1; | 
 | 636 |  | 
 | 637 | 	if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) | 
 | 638 | 		bluecard_hci_set_baud_rate(hdev, DEFAULT_BAUD_RATE); | 
 | 639 |  | 
 | 640 | 	if (test_and_set_bit(HCI_RUNNING, &(hdev->flags))) | 
 | 641 | 		return 0; | 
 | 642 |  | 
 | 643 | 	if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) { | 
 | 644 | 		/* Enable LED */ | 
 | 645 | 		outb(0x08 | 0x20, iobase + 0x30); | 
 | 646 | 	} | 
 | 647 |  | 
 | 648 | 	return 0; | 
 | 649 | } | 
 | 650 |  | 
 | 651 |  | 
 | 652 | static int bluecard_hci_close(struct hci_dev *hdev) | 
 | 653 | { | 
 | 654 | 	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data); | 
 | 655 | 	unsigned int iobase = info->link.io.BasePort1; | 
 | 656 |  | 
 | 657 | 	if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags))) | 
 | 658 | 		return 0; | 
 | 659 |  | 
 | 660 | 	bluecard_hci_flush(hdev); | 
 | 661 |  | 
 | 662 | 	if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) { | 
 | 663 | 		/* Disable LED */ | 
 | 664 | 		outb(0x00, iobase + 0x30); | 
 | 665 | 	} | 
 | 666 |  | 
 | 667 | 	return 0; | 
 | 668 | } | 
 | 669 |  | 
 | 670 |  | 
 | 671 | static int bluecard_hci_send_frame(struct sk_buff *skb) | 
 | 672 | { | 
 | 673 | 	bluecard_info_t *info; | 
 | 674 | 	struct hci_dev *hdev = (struct hci_dev *)(skb->dev); | 
 | 675 |  | 
 | 676 | 	if (!hdev) { | 
 | 677 | 		BT_ERR("Frame for unknown HCI device (hdev=NULL)"); | 
 | 678 | 		return -ENODEV; | 
 | 679 | 	} | 
 | 680 |  | 
 | 681 | 	info = (bluecard_info_t *)(hdev->driver_data); | 
 | 682 |  | 
 | 683 | 	switch (skb->pkt_type) { | 
 | 684 | 	case HCI_COMMAND_PKT: | 
 | 685 | 		hdev->stat.cmd_tx++; | 
 | 686 | 		break; | 
 | 687 | 	case HCI_ACLDATA_PKT: | 
 | 688 | 		hdev->stat.acl_tx++; | 
 | 689 | 		break; | 
 | 690 | 	case HCI_SCODATA_PKT: | 
 | 691 | 		hdev->stat.sco_tx++; | 
 | 692 | 		break; | 
 | 693 | 	}; | 
 | 694 |  | 
 | 695 | 	/* Prepend skb with frame type */ | 
 | 696 | 	memcpy(skb_push(skb, 1), &(skb->pkt_type), 1); | 
 | 697 | 	skb_queue_tail(&(info->txq), skb); | 
 | 698 |  | 
 | 699 | 	bluecard_write_wakeup(info); | 
 | 700 |  | 
 | 701 | 	return 0; | 
 | 702 | } | 
 | 703 |  | 
 | 704 |  | 
 | 705 | static void bluecard_hci_destruct(struct hci_dev *hdev) | 
 | 706 | { | 
 | 707 | } | 
 | 708 |  | 
 | 709 |  | 
 | 710 | static int bluecard_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg) | 
 | 711 | { | 
 | 712 | 	return -ENOIOCTLCMD; | 
 | 713 | } | 
 | 714 |  | 
 | 715 |  | 
 | 716 |  | 
 | 717 | /* ======================== Card services HCI interaction ======================== */ | 
 | 718 |  | 
 | 719 |  | 
 | 720 | static int bluecard_open(bluecard_info_t *info) | 
 | 721 | { | 
 | 722 | 	unsigned int iobase = info->link.io.BasePort1; | 
 | 723 | 	struct hci_dev *hdev; | 
 | 724 | 	unsigned char id; | 
 | 725 |  | 
 | 726 | 	spin_lock_init(&(info->lock)); | 
 | 727 |  | 
 | 728 | 	init_timer(&(info->timer)); | 
 | 729 | 	info->timer.function = &bluecard_activity_led_timeout; | 
 | 730 | 	info->timer.data = (u_long)info; | 
 | 731 |  | 
 | 732 | 	skb_queue_head_init(&(info->txq)); | 
 | 733 |  | 
 | 734 | 	info->rx_state = RECV_WAIT_PACKET_TYPE; | 
 | 735 | 	info->rx_count = 0; | 
 | 736 | 	info->rx_skb = NULL; | 
 | 737 |  | 
 | 738 | 	/* Initialize HCI device */ | 
 | 739 | 	hdev = hci_alloc_dev(); | 
 | 740 | 	if (!hdev) { | 
 | 741 | 		BT_ERR("Can't allocate HCI device"); | 
 | 742 | 		return -ENOMEM; | 
 | 743 | 	} | 
 | 744 |  | 
 | 745 | 	info->hdev = hdev; | 
 | 746 |  | 
 | 747 | 	hdev->type = HCI_PCCARD; | 
 | 748 | 	hdev->driver_data = info; | 
 | 749 |  | 
 | 750 | 	hdev->open     = bluecard_hci_open; | 
 | 751 | 	hdev->close    = bluecard_hci_close; | 
 | 752 | 	hdev->flush    = bluecard_hci_flush; | 
 | 753 | 	hdev->send     = bluecard_hci_send_frame; | 
 | 754 | 	hdev->destruct = bluecard_hci_destruct; | 
 | 755 | 	hdev->ioctl    = bluecard_hci_ioctl; | 
 | 756 |  | 
 | 757 | 	hdev->owner = THIS_MODULE; | 
 | 758 |  | 
 | 759 | 	id = inb(iobase + 0x30); | 
 | 760 |  | 
 | 761 | 	if ((id & 0x0f) == 0x02) | 
 | 762 | 		set_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)); | 
 | 763 |  | 
 | 764 | 	if (id & 0x10) | 
 | 765 | 		set_bit(CARD_HAS_POWER_LED, &(info->hw_state)); | 
 | 766 |  | 
 | 767 | 	if (id & 0x20) | 
 | 768 | 		set_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state)); | 
 | 769 |  | 
 | 770 | 	/* Reset card */ | 
 | 771 | 	info->ctrl_reg = REG_CONTROL_BT_RESET | REG_CONTROL_CARD_RESET; | 
 | 772 | 	outb(info->ctrl_reg, iobase + REG_CONTROL); | 
 | 773 |  | 
 | 774 | 	/* Turn FPGA off */ | 
 | 775 | 	outb(0x80, iobase + 0x30); | 
 | 776 |  | 
 | 777 | 	/* Wait some time */ | 
 | 778 | 	msleep(10); | 
 | 779 |  | 
 | 780 | 	/* Turn FPGA on */ | 
 | 781 | 	outb(0x00, iobase + 0x30); | 
 | 782 |  | 
 | 783 | 	/* Activate card */ | 
 | 784 | 	info->ctrl_reg = REG_CONTROL_BT_ON | REG_CONTROL_BT_RES_PU; | 
 | 785 | 	outb(info->ctrl_reg, iobase + REG_CONTROL); | 
 | 786 |  | 
 | 787 | 	/* Enable interrupt */ | 
 | 788 | 	outb(0xff, iobase + REG_INTERRUPT); | 
 | 789 | 	info->ctrl_reg |= REG_CONTROL_INTERRUPT; | 
 | 790 | 	outb(info->ctrl_reg, iobase + REG_CONTROL); | 
 | 791 |  | 
 | 792 | 	if ((id & 0x0f) == 0x03) { | 
 | 793 | 		/* Disable RTS */ | 
 | 794 | 		info->ctrl_reg |= REG_CONTROL_RTS; | 
 | 795 | 		outb(info->ctrl_reg, iobase + REG_CONTROL); | 
 | 796 |  | 
 | 797 | 		/* Set baud rate */ | 
 | 798 | 		info->ctrl_reg |= 0x03; | 
 | 799 | 		outb(info->ctrl_reg, iobase + REG_CONTROL); | 
 | 800 |  | 
 | 801 | 		/* Enable RTS */ | 
 | 802 | 		info->ctrl_reg &= ~REG_CONTROL_RTS; | 
 | 803 | 		outb(info->ctrl_reg, iobase + REG_CONTROL); | 
 | 804 |  | 
 | 805 | 		set_bit(XMIT_BUF_ONE_READY, &(info->tx_state)); | 
 | 806 | 		set_bit(XMIT_BUF_TWO_READY, &(info->tx_state)); | 
 | 807 | 		set_bit(XMIT_SENDING_READY, &(info->tx_state)); | 
 | 808 | 	} | 
 | 809 |  | 
 | 810 | 	/* Start the RX buffers */ | 
 | 811 | 	outb(REG_COMMAND_RX_BUF_ONE, iobase + REG_COMMAND); | 
 | 812 | 	outb(REG_COMMAND_RX_BUF_TWO, iobase + REG_COMMAND); | 
 | 813 |  | 
 | 814 | 	/* Signal that the hardware is ready */ | 
 | 815 | 	set_bit(CARD_READY, &(info->hw_state)); | 
 | 816 |  | 
 | 817 | 	/* Drop TX queue */ | 
 | 818 | 	skb_queue_purge(&(info->txq)); | 
 | 819 |  | 
 | 820 | 	/* Control the point at which RTS is enabled */ | 
 | 821 | 	outb((0x0f << RTS_LEVEL_SHIFT_BITS) | 1, iobase + REG_RX_CONTROL); | 
 | 822 |  | 
 | 823 | 	/* Timeout before it is safe to send the first HCI packet */ | 
 | 824 | 	msleep(1250); | 
 | 825 |  | 
 | 826 | 	/* Register HCI device */ | 
 | 827 | 	if (hci_register_dev(hdev) < 0) { | 
 | 828 | 		BT_ERR("Can't register HCI device"); | 
 | 829 | 		info->hdev = NULL; | 
 | 830 | 		hci_free_dev(hdev); | 
 | 831 | 		return -ENODEV; | 
 | 832 | 	} | 
 | 833 |  | 
 | 834 | 	return 0; | 
 | 835 | } | 
 | 836 |  | 
 | 837 |  | 
 | 838 | static int bluecard_close(bluecard_info_t *info) | 
 | 839 | { | 
 | 840 | 	unsigned int iobase = info->link.io.BasePort1; | 
 | 841 | 	struct hci_dev *hdev = info->hdev; | 
 | 842 |  | 
 | 843 | 	if (!hdev) | 
 | 844 | 		return -ENODEV; | 
 | 845 |  | 
 | 846 | 	bluecard_hci_close(hdev); | 
 | 847 |  | 
 | 848 | 	clear_bit(CARD_READY, &(info->hw_state)); | 
 | 849 |  | 
 | 850 | 	/* Reset card */ | 
 | 851 | 	info->ctrl_reg = REG_CONTROL_BT_RESET | REG_CONTROL_CARD_RESET; | 
 | 852 | 	outb(info->ctrl_reg, iobase + REG_CONTROL); | 
 | 853 |  | 
 | 854 | 	/* Turn FPGA off */ | 
 | 855 | 	outb(0x80, iobase + 0x30); | 
 | 856 |  | 
 | 857 | 	if (hci_unregister_dev(hdev) < 0) | 
 | 858 | 		BT_ERR("Can't unregister HCI device %s", hdev->name); | 
 | 859 |  | 
 | 860 | 	hci_free_dev(hdev); | 
 | 861 |  | 
 | 862 | 	return 0; | 
 | 863 | } | 
 | 864 |  | 
 | 865 | static dev_link_t *bluecard_attach(void) | 
 | 866 | { | 
 | 867 | 	bluecard_info_t *info; | 
 | 868 | 	client_reg_t client_reg; | 
 | 869 | 	dev_link_t *link; | 
 | 870 | 	int ret; | 
 | 871 |  | 
 | 872 | 	/* Create new info device */ | 
 | 873 | 	info = kmalloc(sizeof(*info), GFP_KERNEL); | 
 | 874 | 	if (!info) | 
 | 875 | 		return NULL; | 
 | 876 | 	memset(info, 0, sizeof(*info)); | 
 | 877 |  | 
 | 878 | 	link = &info->link; | 
 | 879 | 	link->priv = info; | 
 | 880 |  | 
 | 881 | 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; | 
 | 882 | 	link->io.NumPorts1 = 8; | 
 | 883 | 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; | 
 | 884 | 	link->irq.IRQInfo1 = IRQ_LEVEL_ID; | 
 | 885 |  | 
 | 886 | 	link->irq.Handler = bluecard_interrupt; | 
 | 887 | 	link->irq.Instance = info; | 
 | 888 |  | 
 | 889 | 	link->conf.Attributes = CONF_ENABLE_IRQ; | 
 | 890 | 	link->conf.Vcc = 50; | 
 | 891 | 	link->conf.IntType = INT_MEMORY_AND_IO; | 
 | 892 |  | 
 | 893 | 	/* Register with Card Services */ | 
 | 894 | 	link->next = dev_list; | 
 | 895 | 	dev_list = link; | 
 | 896 | 	client_reg.dev_info = &dev_info; | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 897 | 	client_reg.Version = 0x0210; | 
 | 898 | 	client_reg.event_callback_args.client_data = link; | 
 | 899 |  | 
 | 900 | 	ret = pcmcia_register_client(&link->handle, &client_reg); | 
 | 901 | 	if (ret != CS_SUCCESS) { | 
 | 902 | 		cs_error(link->handle, RegisterClient, ret); | 
 | 903 | 		bluecard_detach(link); | 
 | 904 | 		return NULL; | 
 | 905 | 	} | 
 | 906 |  | 
 | 907 | 	return link; | 
 | 908 | } | 
 | 909 |  | 
 | 910 |  | 
 | 911 | static void bluecard_detach(dev_link_t *link) | 
 | 912 | { | 
 | 913 | 	bluecard_info_t *info = link->priv; | 
 | 914 | 	dev_link_t **linkp; | 
 | 915 | 	int ret; | 
 | 916 |  | 
 | 917 | 	/* Locate device structure */ | 
 | 918 | 	for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) | 
 | 919 | 		if (*linkp == link) | 
 | 920 | 			break; | 
 | 921 |  | 
 | 922 | 	if (*linkp == NULL) | 
 | 923 | 		return; | 
 | 924 |  | 
 | 925 | 	if (link->state & DEV_CONFIG) | 
 | 926 | 		bluecard_release(link); | 
 | 927 |  | 
 | 928 | 	if (link->handle) { | 
 | 929 | 		ret = pcmcia_deregister_client(link->handle); | 
 | 930 | 		if (ret != CS_SUCCESS) | 
 | 931 | 			cs_error(link->handle, DeregisterClient, ret); | 
 | 932 | 	} | 
 | 933 |  | 
 | 934 | 	/* Unlink device structure, free bits */ | 
 | 935 | 	*linkp = link->next; | 
 | 936 |  | 
 | 937 | 	kfree(info); | 
 | 938 | } | 
 | 939 |  | 
 | 940 |  | 
 | 941 | static int first_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse) | 
 | 942 | { | 
 | 943 | 	int i; | 
 | 944 |  | 
 | 945 | 	i = pcmcia_get_first_tuple(handle, tuple); | 
 | 946 | 	if (i != CS_SUCCESS) | 
 | 947 | 		return CS_NO_MORE_ITEMS; | 
 | 948 |  | 
 | 949 | 	i = pcmcia_get_tuple_data(handle, tuple); | 
 | 950 | 	if (i != CS_SUCCESS) | 
 | 951 | 		return i; | 
 | 952 |  | 
 | 953 | 	return pcmcia_parse_tuple(handle, tuple, parse); | 
 | 954 | } | 
 | 955 |  | 
 | 956 | static void bluecard_config(dev_link_t *link) | 
 | 957 | { | 
 | 958 | 	client_handle_t handle = link->handle; | 
 | 959 | 	bluecard_info_t *info = link->priv; | 
 | 960 | 	tuple_t tuple; | 
 | 961 | 	u_short buf[256]; | 
 | 962 | 	cisparse_t parse; | 
 | 963 | 	config_info_t config; | 
 | 964 | 	int i, n, last_ret, last_fn; | 
 | 965 |  | 
 | 966 | 	tuple.TupleData = (cisdata_t *)buf; | 
 | 967 | 	tuple.TupleOffset = 0; | 
 | 968 | 	tuple.TupleDataMax = 255; | 
 | 969 | 	tuple.Attributes = 0; | 
 | 970 |  | 
 | 971 | 	/* Get configuration register information */ | 
 | 972 | 	tuple.DesiredTuple = CISTPL_CONFIG; | 
 | 973 | 	last_ret = first_tuple(handle, &tuple, &parse); | 
 | 974 | 	if (last_ret != CS_SUCCESS) { | 
 | 975 | 		last_fn = ParseTuple; | 
 | 976 | 		goto cs_failed; | 
 | 977 | 	} | 
 | 978 | 	link->conf.ConfigBase = parse.config.base; | 
 | 979 | 	link->conf.Present = parse.config.rmask[0]; | 
 | 980 |  | 
 | 981 | 	/* Configure card */ | 
 | 982 | 	link->state |= DEV_CONFIG; | 
 | 983 | 	i = pcmcia_get_configuration_info(handle, &config); | 
 | 984 | 	link->conf.Vcc = config.Vcc; | 
 | 985 |  | 
 | 986 | 	link->conf.ConfigIndex = 0x20; | 
 | 987 | 	link->io.NumPorts1 = 64; | 
 | 988 | 	link->io.IOAddrLines = 6; | 
 | 989 |  | 
 | 990 | 	for (n = 0; n < 0x400; n += 0x40) { | 
 | 991 | 		link->io.BasePort1 = n ^ 0x300; | 
 | 992 | 		i = pcmcia_request_io(link->handle, &link->io); | 
 | 993 | 		if (i == CS_SUCCESS) | 
 | 994 | 			break; | 
 | 995 | 	} | 
 | 996 |  | 
 | 997 | 	if (i != CS_SUCCESS) { | 
 | 998 | 		cs_error(link->handle, RequestIO, i); | 
 | 999 | 		goto failed; | 
 | 1000 | 	} | 
 | 1001 |  | 
 | 1002 | 	i = pcmcia_request_irq(link->handle, &link->irq); | 
 | 1003 | 	if (i != CS_SUCCESS) { | 
 | 1004 | 		cs_error(link->handle, RequestIRQ, i); | 
 | 1005 | 		link->irq.AssignedIRQ = 0; | 
 | 1006 | 	} | 
 | 1007 |  | 
 | 1008 | 	i = pcmcia_request_configuration(link->handle, &link->conf); | 
 | 1009 | 	if (i != CS_SUCCESS) { | 
 | 1010 | 		cs_error(link->handle, RequestConfiguration, i); | 
 | 1011 | 		goto failed; | 
 | 1012 | 	} | 
 | 1013 |  | 
 | 1014 | 	if (bluecard_open(info) != 0) | 
 | 1015 | 		goto failed; | 
 | 1016 |  | 
 | 1017 | 	strcpy(info->node.dev_name, info->hdev->name); | 
 | 1018 | 	link->dev = &info->node; | 
 | 1019 | 	link->state &= ~DEV_CONFIG_PENDING; | 
 | 1020 |  | 
 | 1021 | 	return; | 
 | 1022 |  | 
 | 1023 | cs_failed: | 
 | 1024 | 	cs_error(link->handle, last_fn, last_ret); | 
 | 1025 |  | 
 | 1026 | failed: | 
 | 1027 | 	bluecard_release(link); | 
 | 1028 | } | 
 | 1029 |  | 
 | 1030 |  | 
 | 1031 | static void bluecard_release(dev_link_t *link) | 
 | 1032 | { | 
 | 1033 | 	bluecard_info_t *info = link->priv; | 
 | 1034 |  | 
 | 1035 | 	if (link->state & DEV_PRESENT) | 
 | 1036 | 		bluecard_close(info); | 
 | 1037 |  | 
 | 1038 | 	del_timer(&(info->timer)); | 
 | 1039 |  | 
 | 1040 | 	link->dev = NULL; | 
 | 1041 |  | 
 | 1042 | 	pcmcia_release_configuration(link->handle); | 
 | 1043 | 	pcmcia_release_io(link->handle, &link->io); | 
 | 1044 | 	pcmcia_release_irq(link->handle, &link->irq); | 
 | 1045 |  | 
 | 1046 | 	link->state &= ~DEV_CONFIG; | 
 | 1047 | } | 
 | 1048 |  | 
 | 1049 |  | 
 | 1050 | static int bluecard_event(event_t event, int priority, event_callback_args_t *args) | 
 | 1051 | { | 
 | 1052 | 	dev_link_t *link = args->client_data; | 
 | 1053 | 	bluecard_info_t *info = link->priv; | 
 | 1054 |  | 
 | 1055 | 	switch (event) { | 
 | 1056 | 	case CS_EVENT_CARD_REMOVAL: | 
 | 1057 | 		link->state &= ~DEV_PRESENT; | 
 | 1058 | 		if (link->state & DEV_CONFIG) { | 
 | 1059 | 			bluecard_close(info); | 
 | 1060 | 			bluecard_release(link); | 
 | 1061 | 		} | 
 | 1062 | 		break; | 
 | 1063 | 	case CS_EVENT_CARD_INSERTION: | 
 | 1064 | 		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; | 
 | 1065 | 		bluecard_config(link); | 
 | 1066 | 		break; | 
 | 1067 | 	case CS_EVENT_PM_SUSPEND: | 
 | 1068 | 		link->state |= DEV_SUSPEND; | 
 | 1069 | 		/* Fall through... */ | 
 | 1070 | 	case CS_EVENT_RESET_PHYSICAL: | 
 | 1071 | 		if (link->state & DEV_CONFIG) | 
 | 1072 | 			pcmcia_release_configuration(link->handle); | 
 | 1073 | 		break; | 
 | 1074 | 	case CS_EVENT_PM_RESUME: | 
 | 1075 | 		link->state &= ~DEV_SUSPEND; | 
 | 1076 | 		/* Fall through... */ | 
 | 1077 | 	case CS_EVENT_CARD_RESET: | 
 | 1078 | 		if (DEV_OK(link)) | 
 | 1079 | 			pcmcia_request_configuration(link->handle, &link->conf); | 
 | 1080 | 		break; | 
 | 1081 | 	} | 
 | 1082 |  | 
 | 1083 | 	return 0; | 
 | 1084 | } | 
 | 1085 |  | 
| Dominik Brodowski | 7f70cb6 | 2005-06-27 16:28:35 -0700 | [diff] [blame] | 1086 | static struct pcmcia_device_id bluecard_ids[] = { | 
 | 1087 | 	PCMCIA_DEVICE_PROD_ID12("BlueCard", "LSE041", 0xbaf16fbf, 0x657cc15e), | 
 | 1088 | 	PCMCIA_DEVICE_PROD_ID12("BTCFCARD", "LSE139", 0xe3987764, 0x2524b59c), | 
 | 1089 | 	PCMCIA_DEVICE_PROD_ID12("WSS", "LSE039", 0x0a0736ec, 0x24e6dfab), | 
 | 1090 | 	PCMCIA_DEVICE_NULL | 
 | 1091 | }; | 
 | 1092 | MODULE_DEVICE_TABLE(pcmcia, bluecard_ids); | 
 | 1093 |  | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1094 | static struct pcmcia_driver bluecard_driver = { | 
 | 1095 | 	.owner		= THIS_MODULE, | 
 | 1096 | 	.drv		= { | 
 | 1097 | 		.name	= "bluecard_cs", | 
 | 1098 | 	}, | 
 | 1099 | 	.attach		= bluecard_attach, | 
| Dominik Brodowski | 1e212f3 | 2005-07-07 17:59:00 -0700 | [diff] [blame] | 1100 | 	.event		= bluecard_event, | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1101 | 	.detach		= bluecard_detach, | 
| Dominik Brodowski | 7f70cb6 | 2005-06-27 16:28:35 -0700 | [diff] [blame] | 1102 | 	.id_table	= bluecard_ids, | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1103 | }; | 
 | 1104 |  | 
 | 1105 | static int __init init_bluecard_cs(void) | 
 | 1106 | { | 
 | 1107 | 	return pcmcia_register_driver(&bluecard_driver); | 
 | 1108 | } | 
 | 1109 |  | 
 | 1110 |  | 
 | 1111 | static void __exit exit_bluecard_cs(void) | 
 | 1112 | { | 
 | 1113 | 	pcmcia_unregister_driver(&bluecard_driver); | 
 | 1114 | 	BUG_ON(dev_list != NULL); | 
 | 1115 | } | 
 | 1116 |  | 
 | 1117 | module_init(init_bluecard_cs); | 
 | 1118 | module_exit(exit_bluecard_cs); |