| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* | 
|  | 2 | drivers/net/tulip/pnic.c | 
|  | 3 |  | 
|  | 4 | Maintained by Jeff Garzik <jgarzik@pobox.com> | 
|  | 5 | Copyright 2000,2001  The Linux Kernel Team | 
|  | 6 | Written/copyright 1994-2001 by Donald Becker. | 
|  | 7 |  | 
|  | 8 | This software may be used and distributed according to the terms | 
|  | 9 | of the GNU General Public License, incorporated herein by reference. | 
|  | 10 |  | 
|  | 11 | Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} | 
|  | 12 | for more information on this driver, or visit the project | 
|  | 13 | Web page at http://sourceforge.net/projects/tulip/ | 
|  | 14 |  | 
|  | 15 | */ | 
|  | 16 |  | 
|  | 17 | #include <linux/kernel.h> | 
|  | 18 | #include <linux/pci.h> | 
|  | 19 | #include "tulip.h" | 
|  | 20 |  | 
|  | 21 |  | 
|  | 22 | void pnic_do_nway(struct net_device *dev) | 
|  | 23 | { | 
|  | 24 | struct tulip_private *tp = netdev_priv(dev); | 
|  | 25 | void __iomem *ioaddr = tp->base_addr; | 
|  | 26 | u32 phy_reg = ioread32(ioaddr + 0xB8); | 
|  | 27 | u32 new_csr6 = tp->csr6 & ~0x40C40200; | 
|  | 28 |  | 
|  | 29 | if (phy_reg & 0x78000000) { /* Ignore baseT4 */ | 
|  | 30 | if (phy_reg & 0x20000000)		dev->if_port = 5; | 
|  | 31 | else if (phy_reg & 0x40000000)	dev->if_port = 3; | 
|  | 32 | else if (phy_reg & 0x10000000)	dev->if_port = 4; | 
|  | 33 | else if (phy_reg & 0x08000000)	dev->if_port = 0; | 
|  | 34 | tp->nwayset = 1; | 
|  | 35 | new_csr6 = (dev->if_port & 1) ? 0x01860000 : 0x00420000; | 
|  | 36 | iowrite32(0x32 | (dev->if_port & 1), ioaddr + CSR12); | 
|  | 37 | if (dev->if_port & 1) | 
|  | 38 | iowrite32(0x1F868, ioaddr + 0xB8); | 
|  | 39 | if (phy_reg & 0x30000000) { | 
|  | 40 | tp->full_duplex = 1; | 
|  | 41 | new_csr6 |= 0x00000200; | 
|  | 42 | } | 
|  | 43 | if (tulip_debug > 1) | 
|  | 44 | printk(KERN_DEBUG "%s: PNIC autonegotiated status %8.8x, %s.\n", | 
|  | 45 | dev->name, phy_reg, medianame[dev->if_port]); | 
|  | 46 | if (tp->csr6 != new_csr6) { | 
|  | 47 | tp->csr6 = new_csr6; | 
|  | 48 | /* Restart Tx */ | 
|  | 49 | tulip_restart_rxtx(tp); | 
|  | 50 | dev->trans_start = jiffies; | 
|  | 51 | } | 
|  | 52 | } | 
|  | 53 | } | 
|  | 54 |  | 
|  | 55 | void pnic_lnk_change(struct net_device *dev, int csr5) | 
|  | 56 | { | 
|  | 57 | struct tulip_private *tp = netdev_priv(dev); | 
|  | 58 | void __iomem *ioaddr = tp->base_addr; | 
|  | 59 | int phy_reg = ioread32(ioaddr + 0xB8); | 
|  | 60 |  | 
|  | 61 | if (tulip_debug > 1) | 
|  | 62 | printk(KERN_DEBUG "%s: PNIC link changed state %8.8x, CSR5 %8.8x.\n", | 
|  | 63 | dev->name, phy_reg, csr5); | 
|  | 64 | if (ioread32(ioaddr + CSR5) & TPLnkFail) { | 
|  | 65 | iowrite32((ioread32(ioaddr + CSR7) & ~TPLnkFail) | TPLnkPass, ioaddr + CSR7); | 
|  | 66 | /* If we use an external MII, then we mustn't use the | 
|  | 67 | * internal negotiation. | 
|  | 68 | */ | 
|  | 69 | if (tulip_media_cap[dev->if_port] & MediaIsMII) | 
|  | 70 | return; | 
|  | 71 | if (! tp->nwayset  ||  jiffies - dev->trans_start > 1*HZ) { | 
|  | 72 | tp->csr6 = 0x00420000 | (tp->csr6 & 0x0000fdff); | 
|  | 73 | iowrite32(tp->csr6, ioaddr + CSR6); | 
|  | 74 | iowrite32(0x30, ioaddr + CSR12); | 
|  | 75 | iowrite32(0x0201F078, ioaddr + 0xB8); /* Turn on autonegotiation. */ | 
|  | 76 | dev->trans_start = jiffies; | 
|  | 77 | } | 
|  | 78 | } else if (ioread32(ioaddr + CSR5) & TPLnkPass) { | 
|  | 79 | if (tulip_media_cap[dev->if_port] & MediaIsMII) { | 
|  | 80 | spin_lock(&tp->lock); | 
|  | 81 | tulip_check_duplex(dev); | 
|  | 82 | spin_unlock(&tp->lock); | 
|  | 83 | } else { | 
|  | 84 | pnic_do_nway(dev); | 
|  | 85 | } | 
|  | 86 | iowrite32((ioread32(ioaddr + CSR7) & ~TPLnkPass) | TPLnkFail, ioaddr + CSR7); | 
|  | 87 | } | 
|  | 88 | } | 
|  | 89 |  | 
|  | 90 | void pnic_timer(unsigned long data) | 
|  | 91 | { | 
|  | 92 | struct net_device *dev = (struct net_device *)data; | 
|  | 93 | struct tulip_private *tp = netdev_priv(dev); | 
|  | 94 | void __iomem *ioaddr = tp->base_addr; | 
|  | 95 | int next_tick = 60*HZ; | 
|  | 96 |  | 
|  | 97 | if(!ioread32(ioaddr + CSR7)) { | 
|  | 98 | /* the timer was called due to a work overflow | 
|  | 99 | * in the interrupt handler. Skip the connection | 
|  | 100 | * checks, the nic is definitively speaking with | 
|  | 101 | * his link partner. | 
|  | 102 | */ | 
|  | 103 | goto too_good_connection; | 
|  | 104 | } | 
|  | 105 |  | 
|  | 106 | if (tulip_media_cap[dev->if_port] & MediaIsMII) { | 
|  | 107 | spin_lock_irq(&tp->lock); | 
|  | 108 | if (tulip_check_duplex(dev) > 0) | 
|  | 109 | next_tick = 3*HZ; | 
|  | 110 | spin_unlock_irq(&tp->lock); | 
|  | 111 | } else { | 
|  | 112 | int csr12 = ioread32(ioaddr + CSR12); | 
|  | 113 | int new_csr6 = tp->csr6 & ~0x40C40200; | 
|  | 114 | int phy_reg = ioread32(ioaddr + 0xB8); | 
|  | 115 | int csr5 = ioread32(ioaddr + CSR5); | 
|  | 116 |  | 
|  | 117 | if (tulip_debug > 1) | 
|  | 118 | printk(KERN_DEBUG "%s: PNIC timer PHY status %8.8x, %s " | 
|  | 119 | "CSR5 %8.8x.\n", | 
|  | 120 | dev->name, phy_reg, medianame[dev->if_port], csr5); | 
|  | 121 | if (phy_reg & 0x04000000) {	/* Remote link fault */ | 
|  | 122 | iowrite32(0x0201F078, ioaddr + 0xB8); | 
|  | 123 | next_tick = 1*HZ; | 
|  | 124 | tp->nwayset = 0; | 
|  | 125 | } else if (phy_reg & 0x78000000) { /* Ignore baseT4 */ | 
|  | 126 | pnic_do_nway(dev); | 
|  | 127 | next_tick = 60*HZ; | 
|  | 128 | } else if (csr5 & TPLnkFail) { /* 100baseTx link beat */ | 
|  | 129 | if (tulip_debug > 1) | 
|  | 130 | printk(KERN_DEBUG "%s: %s link beat failed, CSR12 %4.4x, " | 
|  | 131 | "CSR5 %8.8x, PHY %3.3x.\n", | 
|  | 132 | dev->name, medianame[dev->if_port], csr12, | 
|  | 133 | ioread32(ioaddr + CSR5), ioread32(ioaddr + 0xB8)); | 
|  | 134 | next_tick = 3*HZ; | 
|  | 135 | if (tp->medialock) { | 
|  | 136 | } else if (tp->nwayset  &&  (dev->if_port & 1)) { | 
|  | 137 | next_tick = 1*HZ; | 
|  | 138 | } else if (dev->if_port == 0) { | 
|  | 139 | dev->if_port = 3; | 
|  | 140 | iowrite32(0x33, ioaddr + CSR12); | 
|  | 141 | new_csr6 = 0x01860000; | 
|  | 142 | iowrite32(0x1F868, ioaddr + 0xB8); | 
|  | 143 | } else { | 
|  | 144 | dev->if_port = 0; | 
|  | 145 | iowrite32(0x32, ioaddr + CSR12); | 
|  | 146 | new_csr6 = 0x00420000; | 
|  | 147 | iowrite32(0x1F078, ioaddr + 0xB8); | 
|  | 148 | } | 
|  | 149 | if (tp->csr6 != new_csr6) { | 
|  | 150 | tp->csr6 = new_csr6; | 
|  | 151 | /* Restart Tx */ | 
|  | 152 | tulip_restart_rxtx(tp); | 
|  | 153 | dev->trans_start = jiffies; | 
|  | 154 | if (tulip_debug > 1) | 
|  | 155 | printk(KERN_INFO "%s: Changing PNIC configuration to %s " | 
|  | 156 | "%s-duplex, CSR6 %8.8x.\n", | 
|  | 157 | dev->name, medianame[dev->if_port], | 
|  | 158 | tp->full_duplex ? "full" : "half", new_csr6); | 
|  | 159 | } | 
|  | 160 | } | 
|  | 161 | } | 
|  | 162 | too_good_connection: | 
|  | 163 | mod_timer(&tp->timer, RUN_AT(next_tick)); | 
|  | 164 | if(!ioread32(ioaddr + CSR7)) { | 
|  | 165 | if (tulip_debug > 1) | 
|  | 166 | printk(KERN_INFO "%s: sw timer wakeup.\n", dev->name); | 
|  | 167 | disable_irq(dev->irq); | 
|  | 168 | tulip_refill_rx(dev); | 
|  | 169 | enable_irq(dev->irq); | 
|  | 170 | iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7); | 
|  | 171 | } | 
|  | 172 | } |