Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 1 | /* |
| 2 | * xHCI host controller driver |
| 3 | * |
| 4 | * Copyright (C) 2008 Intel Corp. |
| 5 | * |
| 6 | * Author: Sarah Sharp |
| 7 | * Some code borrowed from the Linux EHCI driver. |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or modify |
| 10 | * it under the terms of the GNU General Public License version 2 as |
| 11 | * published by the Free Software Foundation. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, but |
| 14 | * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| 15 | * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| 16 | * for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software Foundation, |
| 20 | * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 21 | */ |
| 22 | |
| 23 | /* |
| 24 | * Ring initialization rules: |
| 25 | * 1. Each segment is initialized to zero, except for link TRBs. |
| 26 | * 2. Ring cycle state = 0. This represents Producer Cycle State (PCS) or |
| 27 | * Consumer Cycle State (CCS), depending on ring function. |
| 28 | * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment. |
| 29 | * |
| 30 | * Ring behavior rules: |
| 31 | * 1. A ring is empty if enqueue == dequeue. This means there will always be at |
| 32 | * least one free TRB in the ring. This is useful if you want to turn that |
| 33 | * into a link TRB and expand the ring. |
| 34 | * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a |
| 35 | * link TRB, then load the pointer with the address in the link TRB. If the |
| 36 | * link TRB had its toggle bit set, you may need to update the ring cycle |
| 37 | * state (see cycle bit rules). You may have to do this multiple times |
| 38 | * until you reach a non-link TRB. |
| 39 | * 3. A ring is full if enqueue++ (for the definition of increment above) |
| 40 | * equals the dequeue pointer. |
| 41 | * |
| 42 | * Cycle bit rules: |
| 43 | * 1. When a consumer increments a dequeue pointer and encounters a toggle bit |
| 44 | * in a link TRB, it must toggle the ring cycle state. |
| 45 | * 2. When a producer increments an enqueue pointer and encounters a toggle bit |
| 46 | * in a link TRB, it must toggle the ring cycle state. |
| 47 | * |
| 48 | * Producer rules: |
| 49 | * 1. Check if ring is full before you enqueue. |
| 50 | * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing. |
| 51 | * Update enqueue pointer between each write (which may update the ring |
| 52 | * cycle state). |
| 53 | * 3. Notify consumer. If SW is producer, it rings the doorbell for command |
| 54 | * and endpoint rings. If HC is the producer for the event ring, |
| 55 | * and it generates an interrupt according to interrupt modulation rules. |
| 56 | * |
| 57 | * Consumer rules: |
| 58 | * 1. Check if TRB belongs to you. If the cycle bit == your ring cycle state, |
| 59 | * the TRB is owned by the consumer. |
| 60 | * 2. Update dequeue pointer (which may update the ring cycle state) and |
| 61 | * continue processing TRBs until you reach a TRB which is not owned by you. |
| 62 | * 3. Notify the producer. SW is the consumer for the event ring, and it |
| 63 | * updates event ring dequeue pointer. HC is the consumer for the command and |
| 64 | * endpoint rings; it generates events on the event ring for these. |
| 65 | */ |
| 66 | |
Sarah Sharp | 8a96c05 | 2009-04-27 19:59:19 -0700 | [diff] [blame^] | 67 | #include <linux/scatterlist.h> |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 68 | #include "xhci.h" |
| 69 | |
| 70 | /* |
| 71 | * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA |
| 72 | * address of the TRB. |
| 73 | */ |
| 74 | dma_addr_t trb_virt_to_dma(struct xhci_segment *seg, |
| 75 | union xhci_trb *trb) |
| 76 | { |
| 77 | unsigned int offset; |
| 78 | |
| 79 | if (!seg || !trb || (void *) trb < (void *) seg->trbs) |
| 80 | return 0; |
| 81 | /* offset in bytes, since these are byte-addressable */ |
| 82 | offset = (unsigned int) trb - (unsigned int) seg->trbs; |
| 83 | /* SEGMENT_SIZE in bytes, trbs are 16-byte aligned */ |
| 84 | if (offset > SEGMENT_SIZE || (offset % sizeof(*trb)) != 0) |
| 85 | return 0; |
| 86 | return seg->dma + offset; |
| 87 | } |
| 88 | |
| 89 | /* Does this link TRB point to the first segment in a ring, |
| 90 | * or was the previous TRB the last TRB on the last segment in the ERST? |
| 91 | */ |
| 92 | static inline bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring, |
| 93 | struct xhci_segment *seg, union xhci_trb *trb) |
| 94 | { |
| 95 | if (ring == xhci->event_ring) |
| 96 | return (trb == &seg->trbs[TRBS_PER_SEGMENT]) && |
| 97 | (seg->next == xhci->event_ring->first_seg); |
| 98 | else |
| 99 | return trb->link.control & LINK_TOGGLE; |
| 100 | } |
| 101 | |
| 102 | /* Is this TRB a link TRB or was the last TRB the last TRB in this event ring |
| 103 | * segment? I.e. would the updated event TRB pointer step off the end of the |
| 104 | * event seg? |
| 105 | */ |
| 106 | static inline int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, |
| 107 | struct xhci_segment *seg, union xhci_trb *trb) |
| 108 | { |
| 109 | if (ring == xhci->event_ring) |
| 110 | return trb == &seg->trbs[TRBS_PER_SEGMENT]; |
| 111 | else |
| 112 | return (trb->link.control & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK); |
| 113 | } |
| 114 | |
| 115 | /* |
| 116 | * See Cycle bit rules. SW is the consumer for the event ring only. |
| 117 | * Don't make a ring full of link TRBs. That would be dumb and this would loop. |
| 118 | */ |
| 119 | static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer) |
| 120 | { |
| 121 | union xhci_trb *next = ++(ring->dequeue); |
| 122 | |
| 123 | ring->deq_updates++; |
| 124 | /* Update the dequeue pointer further if that was a link TRB or we're at |
| 125 | * the end of an event ring segment (which doesn't have link TRBS) |
| 126 | */ |
| 127 | while (last_trb(xhci, ring, ring->deq_seg, next)) { |
| 128 | if (consumer && last_trb_on_last_seg(xhci, ring, ring->deq_seg, next)) { |
| 129 | ring->cycle_state = (ring->cycle_state ? 0 : 1); |
| 130 | if (!in_interrupt()) |
| 131 | xhci_dbg(xhci, "Toggle cycle state for ring 0x%x = %i\n", |
| 132 | (unsigned int) ring, |
| 133 | (unsigned int) ring->cycle_state); |
| 134 | } |
| 135 | ring->deq_seg = ring->deq_seg->next; |
| 136 | ring->dequeue = ring->deq_seg->trbs; |
| 137 | next = ring->dequeue; |
| 138 | } |
| 139 | } |
| 140 | |
| 141 | /* |
| 142 | * See Cycle bit rules. SW is the consumer for the event ring only. |
| 143 | * Don't make a ring full of link TRBs. That would be dumb and this would loop. |
| 144 | * |
| 145 | * If we've just enqueued a TRB that is in the middle of a TD (meaning the |
| 146 | * chain bit is set), then set the chain bit in all the following link TRBs. |
| 147 | * If we've enqueued the last TRB in a TD, make sure the following link TRBs |
| 148 | * have their chain bit cleared (so that each Link TRB is a separate TD). |
| 149 | * |
| 150 | * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit |
| 151 | * set, but other sections talk about dealing with the chain bit set. |
| 152 | * Assume section 6.4.4.1 is wrong, and the chain bit can be set in a Link TRB. |
| 153 | */ |
| 154 | static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer) |
| 155 | { |
| 156 | u32 chain; |
| 157 | union xhci_trb *next; |
| 158 | |
| 159 | chain = ring->enqueue->generic.field[3] & TRB_CHAIN; |
| 160 | next = ++(ring->enqueue); |
| 161 | |
| 162 | ring->enq_updates++; |
| 163 | /* Update the dequeue pointer further if that was a link TRB or we're at |
| 164 | * the end of an event ring segment (which doesn't have link TRBS) |
| 165 | */ |
| 166 | while (last_trb(xhci, ring, ring->enq_seg, next)) { |
| 167 | if (!consumer) { |
| 168 | if (ring != xhci->event_ring) { |
| 169 | /* Give this link TRB to the hardware */ |
| 170 | if (next->link.control & TRB_CYCLE) |
| 171 | next->link.control &= (u32) ~TRB_CYCLE; |
| 172 | else |
| 173 | next->link.control |= (u32) TRB_CYCLE; |
| 174 | next->link.control &= TRB_CHAIN; |
| 175 | next->link.control |= chain; |
| 176 | } |
| 177 | /* Toggle the cycle bit after the last ring segment. */ |
| 178 | if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) { |
| 179 | ring->cycle_state = (ring->cycle_state ? 0 : 1); |
| 180 | if (!in_interrupt()) |
| 181 | xhci_dbg(xhci, "Toggle cycle state for ring 0x%x = %i\n", |
| 182 | (unsigned int) ring, |
| 183 | (unsigned int) ring->cycle_state); |
| 184 | } |
| 185 | } |
| 186 | ring->enq_seg = ring->enq_seg->next; |
| 187 | ring->enqueue = ring->enq_seg->trbs; |
| 188 | next = ring->enqueue; |
| 189 | } |
| 190 | } |
| 191 | |
| 192 | /* |
| 193 | * Check to see if there's room to enqueue num_trbs on the ring. See rules |
| 194 | * above. |
| 195 | * FIXME: this would be simpler and faster if we just kept track of the number |
| 196 | * of free TRBs in a ring. |
| 197 | */ |
| 198 | static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, |
| 199 | unsigned int num_trbs) |
| 200 | { |
| 201 | int i; |
| 202 | union xhci_trb *enq = ring->enqueue; |
| 203 | struct xhci_segment *enq_seg = ring->enq_seg; |
| 204 | |
| 205 | /* Check if ring is empty */ |
| 206 | if (enq == ring->dequeue) |
| 207 | return 1; |
| 208 | /* Make sure there's an extra empty TRB available */ |
| 209 | for (i = 0; i <= num_trbs; ++i) { |
| 210 | if (enq == ring->dequeue) |
| 211 | return 0; |
| 212 | enq++; |
| 213 | while (last_trb(xhci, ring, enq_seg, enq)) { |
| 214 | enq_seg = enq_seg->next; |
| 215 | enq = enq_seg->trbs; |
| 216 | } |
| 217 | } |
| 218 | return 1; |
| 219 | } |
| 220 | |
| 221 | void set_hc_event_deq(struct xhci_hcd *xhci) |
| 222 | { |
| 223 | u32 temp; |
| 224 | dma_addr_t deq; |
| 225 | |
| 226 | deq = trb_virt_to_dma(xhci->event_ring->deq_seg, |
| 227 | xhci->event_ring->dequeue); |
| 228 | if (deq == 0 && !in_interrupt()) |
| 229 | xhci_warn(xhci, "WARN something wrong with SW event ring " |
| 230 | "dequeue ptr.\n"); |
| 231 | /* Update HC event ring dequeue pointer */ |
| 232 | temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]); |
| 233 | temp &= ERST_PTR_MASK; |
| 234 | if (!in_interrupt()) |
| 235 | xhci_dbg(xhci, "// Write event ring dequeue pointer\n"); |
| 236 | xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]); |
| 237 | xhci_writel(xhci, (deq & ~ERST_PTR_MASK) | temp, |
| 238 | &xhci->ir_set->erst_dequeue[0]); |
| 239 | } |
| 240 | |
| 241 | /* Ring the host controller doorbell after placing a command on the ring */ |
| 242 | void ring_cmd_db(struct xhci_hcd *xhci) |
| 243 | { |
| 244 | u32 temp; |
| 245 | |
| 246 | xhci_dbg(xhci, "// Ding dong!\n"); |
| 247 | temp = xhci_readl(xhci, &xhci->dba->doorbell[0]) & DB_MASK; |
| 248 | xhci_writel(xhci, temp | DB_TARGET_HOST, &xhci->dba->doorbell[0]); |
| 249 | /* Flush PCI posted writes */ |
| 250 | xhci_readl(xhci, &xhci->dba->doorbell[0]); |
| 251 | } |
| 252 | |
| 253 | static void handle_cmd_completion(struct xhci_hcd *xhci, |
| 254 | struct xhci_event_cmd *event) |
| 255 | { |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 256 | int slot_id = TRB_TO_SLOT_ID(event->flags); |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 257 | u64 cmd_dma; |
| 258 | dma_addr_t cmd_dequeue_dma; |
| 259 | |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 260 | cmd_dma = (((u64) event->cmd_trb[1]) << 32) + event->cmd_trb[0]; |
| 261 | cmd_dequeue_dma = trb_virt_to_dma(xhci->cmd_ring->deq_seg, |
| 262 | xhci->cmd_ring->dequeue); |
| 263 | /* Is the command ring deq ptr out of sync with the deq seg ptr? */ |
| 264 | if (cmd_dequeue_dma == 0) { |
| 265 | xhci->error_bitmask |= 1 << 4; |
| 266 | return; |
| 267 | } |
| 268 | /* Does the DMA address match our internal dequeue pointer address? */ |
| 269 | if (cmd_dma != (u64) cmd_dequeue_dma) { |
| 270 | xhci->error_bitmask |= 1 << 5; |
| 271 | return; |
| 272 | } |
| 273 | switch (xhci->cmd_ring->dequeue->generic.field[3] & TRB_TYPE_BITMASK) { |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 274 | case TRB_TYPE(TRB_ENABLE_SLOT): |
| 275 | if (GET_COMP_CODE(event->status) == COMP_SUCCESS) |
| 276 | xhci->slot_id = slot_id; |
| 277 | else |
| 278 | xhci->slot_id = 0; |
| 279 | complete(&xhci->addr_dev); |
| 280 | break; |
| 281 | case TRB_TYPE(TRB_DISABLE_SLOT): |
| 282 | if (xhci->devs[slot_id]) |
| 283 | xhci_free_virt_device(xhci, slot_id); |
| 284 | break; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 285 | case TRB_TYPE(TRB_CONFIG_EP): |
| 286 | xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status); |
| 287 | complete(&xhci->devs[slot_id]->cmd_completion); |
| 288 | break; |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 289 | case TRB_TYPE(TRB_ADDR_DEV): |
| 290 | xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status); |
| 291 | complete(&xhci->addr_dev); |
| 292 | break; |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 293 | case TRB_TYPE(TRB_CMD_NOOP): |
| 294 | ++xhci->noops_handled; |
| 295 | break; |
| 296 | default: |
| 297 | /* Skip over unknown commands on the event ring */ |
| 298 | xhci->error_bitmask |= 1 << 6; |
| 299 | break; |
| 300 | } |
| 301 | inc_deq(xhci, xhci->cmd_ring, false); |
| 302 | } |
| 303 | |
Sarah Sharp | 0f2a793 | 2009-04-27 19:57:12 -0700 | [diff] [blame] | 304 | static void handle_port_status(struct xhci_hcd *xhci, |
| 305 | union xhci_trb *event) |
| 306 | { |
| 307 | u32 port_id; |
| 308 | |
| 309 | /* Port status change events always have a successful completion code */ |
| 310 | if (GET_COMP_CODE(event->generic.field[2]) != COMP_SUCCESS) { |
| 311 | xhci_warn(xhci, "WARN: xHC returned failed port status event\n"); |
| 312 | xhci->error_bitmask |= 1 << 8; |
| 313 | } |
| 314 | /* FIXME: core doesn't care about all port link state changes yet */ |
| 315 | port_id = GET_PORT_ID(event->generic.field[0]); |
| 316 | xhci_dbg(xhci, "Port Status Change Event for port %d\n", port_id); |
| 317 | |
| 318 | /* Update event ring dequeue pointer before dropping the lock */ |
| 319 | inc_deq(xhci, xhci->event_ring, true); |
| 320 | set_hc_event_deq(xhci); |
| 321 | |
| 322 | spin_unlock(&xhci->lock); |
| 323 | /* Pass this up to the core */ |
| 324 | usb_hcd_poll_rh_status(xhci_to_hcd(xhci)); |
| 325 | spin_lock(&xhci->lock); |
| 326 | } |
| 327 | |
| 328 | /* |
Sarah Sharp | d0e96f5 | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 329 | * This TD is defined by the TRBs starting at start_trb in start_seg and ending |
| 330 | * at end_trb, which may be in another segment. If the suspect DMA address is a |
| 331 | * TRB in this TD, this function returns that TRB's segment. Otherwise it |
| 332 | * returns 0. |
| 333 | */ |
| 334 | static struct xhci_segment *trb_in_td( |
| 335 | struct xhci_segment *start_seg, |
| 336 | union xhci_trb *start_trb, |
| 337 | union xhci_trb *end_trb, |
| 338 | dma_addr_t suspect_dma) |
| 339 | { |
| 340 | dma_addr_t start_dma; |
| 341 | dma_addr_t end_seg_dma; |
| 342 | dma_addr_t end_trb_dma; |
| 343 | struct xhci_segment *cur_seg; |
| 344 | |
| 345 | start_dma = trb_virt_to_dma(start_seg, start_trb); |
| 346 | cur_seg = start_seg; |
| 347 | |
| 348 | do { |
| 349 | /* |
| 350 | * Last TRB is a link TRB (unless we start inserting links in |
| 351 | * the middle, FIXME if you do) |
| 352 | */ |
| 353 | end_seg_dma = trb_virt_to_dma(cur_seg, &start_seg->trbs[TRBS_PER_SEGMENT - 2]); |
| 354 | /* If the end TRB isn't in this segment, this is set to 0 */ |
| 355 | end_trb_dma = trb_virt_to_dma(cur_seg, end_trb); |
| 356 | |
| 357 | if (end_trb_dma > 0) { |
| 358 | /* The end TRB is in this segment, so suspect should be here */ |
| 359 | if (start_dma <= end_trb_dma) { |
| 360 | if (suspect_dma >= start_dma && suspect_dma <= end_trb_dma) |
| 361 | return cur_seg; |
| 362 | } else { |
| 363 | /* Case for one segment with |
| 364 | * a TD wrapped around to the top |
| 365 | */ |
| 366 | if ((suspect_dma >= start_dma && |
| 367 | suspect_dma <= end_seg_dma) || |
| 368 | (suspect_dma >= cur_seg->dma && |
| 369 | suspect_dma <= end_trb_dma)) |
| 370 | return cur_seg; |
| 371 | } |
| 372 | return 0; |
| 373 | } else { |
| 374 | /* Might still be somewhere in this segment */ |
| 375 | if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma) |
| 376 | return cur_seg; |
| 377 | } |
| 378 | cur_seg = cur_seg->next; |
| 379 | start_dma = trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]); |
| 380 | } while (1); |
| 381 | |
| 382 | } |
| 383 | |
| 384 | /* |
| 385 | * If this function returns an error condition, it means it got a Transfer |
| 386 | * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address. |
| 387 | * At this point, the host controller is probably hosed and should be reset. |
| 388 | */ |
| 389 | static int handle_tx_event(struct xhci_hcd *xhci, |
| 390 | struct xhci_transfer_event *event) |
| 391 | { |
| 392 | struct xhci_virt_device *xdev; |
| 393 | struct xhci_ring *ep_ring; |
| 394 | int ep_index; |
| 395 | struct xhci_td *td = 0; |
| 396 | dma_addr_t event_dma; |
| 397 | struct xhci_segment *event_seg; |
| 398 | union xhci_trb *event_trb; |
Sarah Sharp | b10de14 | 2009-04-27 19:58:50 -0700 | [diff] [blame] | 399 | struct urb *urb; |
Sarah Sharp | d0e96f5 | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 400 | int status = -EINPROGRESS; |
| 401 | |
| 402 | xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)]; |
| 403 | if (!xdev) { |
| 404 | xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n"); |
| 405 | return -ENODEV; |
| 406 | } |
| 407 | |
| 408 | /* Endpoint ID is 1 based, our index is zero based */ |
| 409 | ep_index = TRB_TO_EP_ID(event->flags) - 1; |
| 410 | ep_ring = xdev->ep_rings[ep_index]; |
| 411 | if (!ep_ring || (xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) { |
| 412 | xhci_err(xhci, "ERROR Transfer event pointed to disabled endpoint\n"); |
| 413 | return -ENODEV; |
| 414 | } |
| 415 | |
| 416 | event_dma = event->buffer[0]; |
| 417 | if (event->buffer[1] != 0) |
| 418 | xhci_warn(xhci, "WARN ignoring upper 32-bits of 64-bit TRB dma address\n"); |
| 419 | |
| 420 | /* This TRB should be in the TD at the head of this ring's TD list */ |
| 421 | if (list_empty(&ep_ring->td_list)) { |
| 422 | xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n", |
| 423 | TRB_TO_SLOT_ID(event->flags), ep_index); |
| 424 | xhci_dbg(xhci, "Event TRB with TRB type ID %u\n", |
| 425 | (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10); |
| 426 | xhci_print_trb_offsets(xhci, (union xhci_trb *) event); |
| 427 | urb = NULL; |
| 428 | goto cleanup; |
| 429 | } |
| 430 | td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list); |
| 431 | |
| 432 | /* Is this a TRB in the currently executing TD? */ |
| 433 | event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue, |
| 434 | td->last_trb, event_dma); |
| 435 | if (!event_seg) { |
| 436 | /* HC is busted, give up! */ |
| 437 | xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n"); |
| 438 | return -ESHUTDOWN; |
| 439 | } |
| 440 | event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)]; |
Sarah Sharp | b10de14 | 2009-04-27 19:58:50 -0700 | [diff] [blame] | 441 | xhci_dbg(xhci, "Event TRB with TRB type ID %u\n", |
| 442 | (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10); |
| 443 | xhci_dbg(xhci, "Offset 0x00 (buffer[0]) = 0x%x\n", |
| 444 | (unsigned int) event->buffer[0]); |
| 445 | xhci_dbg(xhci, "Offset 0x04 (buffer[0]) = 0x%x\n", |
| 446 | (unsigned int) event->buffer[1]); |
| 447 | xhci_dbg(xhci, "Offset 0x08 (transfer length) = 0x%x\n", |
| 448 | (unsigned int) event->transfer_len); |
| 449 | xhci_dbg(xhci, "Offset 0x0C (flags) = 0x%x\n", |
| 450 | (unsigned int) event->flags); |
Sarah Sharp | d0e96f5 | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 451 | |
Sarah Sharp | b10de14 | 2009-04-27 19:58:50 -0700 | [diff] [blame] | 452 | /* Look for common error cases */ |
| 453 | switch (GET_COMP_CODE(event->transfer_len)) { |
| 454 | /* Skip codes that require special handling depending on |
| 455 | * transfer type |
| 456 | */ |
| 457 | case COMP_SUCCESS: |
| 458 | case COMP_SHORT_TX: |
| 459 | break; |
| 460 | case COMP_STALL: |
| 461 | xhci_warn(xhci, "WARN: Stalled endpoint\n"); |
| 462 | status = -EPIPE; |
| 463 | break; |
| 464 | case COMP_TRB_ERR: |
| 465 | xhci_warn(xhci, "WARN: TRB error on endpoint\n"); |
| 466 | status = -EILSEQ; |
| 467 | break; |
| 468 | case COMP_TX_ERR: |
| 469 | xhci_warn(xhci, "WARN: transfer error on endpoint\n"); |
| 470 | status = -EPROTO; |
| 471 | break; |
| 472 | case COMP_DB_ERR: |
| 473 | xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n"); |
| 474 | status = -ENOSR; |
| 475 | break; |
| 476 | default: |
| 477 | xhci_warn(xhci, "ERROR Unknown event condition, HC probably busted\n"); |
| 478 | urb = NULL; |
| 479 | goto cleanup; |
| 480 | } |
Sarah Sharp | d0e96f5 | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 481 | /* Now update the urb's actual_length and give back to the core */ |
| 482 | /* Was this a control transfer? */ |
| 483 | if (usb_endpoint_xfer_control(&td->urb->ep->desc)) { |
| 484 | xhci_debug_trb(xhci, xhci->event_ring->dequeue); |
| 485 | switch (GET_COMP_CODE(event->transfer_len)) { |
| 486 | case COMP_SUCCESS: |
| 487 | if (event_trb == ep_ring->dequeue) { |
| 488 | xhci_warn(xhci, "WARN: Success on ctrl setup TRB without IOC set??\n"); |
| 489 | status = -ESHUTDOWN; |
| 490 | } else if (event_trb != td->last_trb) { |
| 491 | xhci_warn(xhci, "WARN: Success on ctrl data TRB without IOC set??\n"); |
| 492 | status = -ESHUTDOWN; |
| 493 | } else { |
| 494 | xhci_dbg(xhci, "Successful control transfer!\n"); |
| 495 | status = 0; |
| 496 | } |
| 497 | break; |
| 498 | case COMP_SHORT_TX: |
| 499 | xhci_warn(xhci, "WARN: short transfer on control ep\n"); |
| 500 | status = -EREMOTEIO; |
| 501 | break; |
Sarah Sharp | d0e96f5 | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 502 | default: |
Sarah Sharp | b10de14 | 2009-04-27 19:58:50 -0700 | [diff] [blame] | 503 | /* Others already handled above */ |
| 504 | break; |
Sarah Sharp | d0e96f5 | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 505 | } |
| 506 | /* |
| 507 | * Did we transfer any data, despite the errors that might have |
| 508 | * happened? I.e. did we get past the setup stage? |
| 509 | */ |
| 510 | if (event_trb != ep_ring->dequeue) { |
| 511 | /* The event was for the status stage */ |
| 512 | if (event_trb == td->last_trb) { |
| 513 | td->urb->actual_length = td->urb->transfer_buffer_length; |
| 514 | } else { |
| 515 | /* The event was for the data stage */ |
| 516 | td->urb->actual_length = td->urb->transfer_buffer_length - |
| 517 | TRB_LEN(event->transfer_len); |
| 518 | } |
| 519 | } |
Sarah Sharp | d0e96f5 | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 520 | } else { |
Sarah Sharp | b10de14 | 2009-04-27 19:58:50 -0700 | [diff] [blame] | 521 | switch (GET_COMP_CODE(event->transfer_len)) { |
| 522 | case COMP_SUCCESS: |
| 523 | /* Double check that the HW transferred everything. */ |
| 524 | if (event_trb != td->last_trb) { |
| 525 | xhci_warn(xhci, "WARN Successful completion " |
| 526 | "on short TX\n"); |
| 527 | if (td->urb->transfer_flags & URB_SHORT_NOT_OK) |
| 528 | status = -EREMOTEIO; |
| 529 | else |
| 530 | status = 0; |
| 531 | } else { |
| 532 | xhci_dbg(xhci, "Successful bulk transfer!\n"); |
| 533 | status = 0; |
| 534 | } |
| 535 | break; |
| 536 | case COMP_SHORT_TX: |
| 537 | if (td->urb->transfer_flags & URB_SHORT_NOT_OK) |
| 538 | status = -EREMOTEIO; |
| 539 | else |
| 540 | status = 0; |
| 541 | break; |
| 542 | default: |
| 543 | /* Others already handled above */ |
| 544 | break; |
| 545 | } |
| 546 | dev_dbg(&td->urb->dev->dev, |
| 547 | "ep %#x - asked for %d bytes, " |
| 548 | "%d bytes untransferred\n", |
| 549 | td->urb->ep->desc.bEndpointAddress, |
| 550 | td->urb->transfer_buffer_length, |
| 551 | TRB_LEN(event->transfer_len)); |
| 552 | /* Fast path - was this the last TRB in the TD for this URB? */ |
| 553 | if (event_trb == td->last_trb) { |
| 554 | if (TRB_LEN(event->transfer_len) != 0) { |
| 555 | td->urb->actual_length = |
| 556 | td->urb->transfer_buffer_length - |
| 557 | TRB_LEN(event->transfer_len); |
| 558 | if (td->urb->actual_length < 0) { |
| 559 | xhci_warn(xhci, "HC gave bad length " |
| 560 | "of %d bytes left\n", |
| 561 | TRB_LEN(event->transfer_len)); |
| 562 | td->urb->actual_length = 0; |
| 563 | } |
| 564 | if (td->urb->transfer_flags & URB_SHORT_NOT_OK) |
| 565 | status = -EREMOTEIO; |
| 566 | else |
| 567 | status = 0; |
| 568 | } else { |
| 569 | td->urb->actual_length = td->urb->transfer_buffer_length; |
| 570 | /* Ignore a short packet completion if the |
| 571 | * untransferred length was zero. |
| 572 | */ |
| 573 | status = 0; |
| 574 | } |
| 575 | } else { |
| 576 | /* Slow path - walk the list, starting from the first |
| 577 | * TRB to get the actual length transferred |
| 578 | */ |
| 579 | td->urb->actual_length = 0; |
| 580 | while (ep_ring->dequeue != event_trb) { |
| 581 | td->urb->actual_length += TRB_LEN(ep_ring->dequeue->generic.field[2]); |
| 582 | inc_deq(xhci, ep_ring, false); |
| 583 | } |
| 584 | td->urb->actual_length += TRB_LEN(ep_ring->dequeue->generic.field[2]) - |
| 585 | TRB_LEN(event->transfer_len); |
| 586 | |
| 587 | } |
Sarah Sharp | d0e96f5 | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 588 | } |
Sarah Sharp | b10de14 | 2009-04-27 19:58:50 -0700 | [diff] [blame] | 589 | /* Update ring dequeue pointer */ |
| 590 | while (ep_ring->dequeue != td->last_trb) |
| 591 | inc_deq(xhci, ep_ring, false); |
| 592 | inc_deq(xhci, ep_ring, false); |
| 593 | |
| 594 | /* Clean up the endpoint's TD list */ |
| 595 | urb = td->urb; |
| 596 | list_del(&td->td_list); |
| 597 | kfree(td); |
| 598 | urb->hcpriv = NULL; |
Sarah Sharp | d0e96f5 | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 599 | cleanup: |
| 600 | inc_deq(xhci, xhci->event_ring, true); |
| 601 | set_hc_event_deq(xhci); |
| 602 | |
Sarah Sharp | b10de14 | 2009-04-27 19:58:50 -0700 | [diff] [blame] | 603 | /* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */ |
Sarah Sharp | d0e96f5 | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 604 | if (urb) { |
| 605 | usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb); |
| 606 | spin_unlock(&xhci->lock); |
| 607 | usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status); |
| 608 | spin_lock(&xhci->lock); |
| 609 | } |
| 610 | return 0; |
| 611 | } |
| 612 | |
| 613 | /* |
Sarah Sharp | 0f2a793 | 2009-04-27 19:57:12 -0700 | [diff] [blame] | 614 | * This function handles all OS-owned events on the event ring. It may drop |
| 615 | * xhci->lock between event processing (e.g. to pass up port status changes). |
| 616 | */ |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 617 | void handle_event(struct xhci_hcd *xhci) |
| 618 | { |
| 619 | union xhci_trb *event; |
Sarah Sharp | 0f2a793 | 2009-04-27 19:57:12 -0700 | [diff] [blame] | 620 | int update_ptrs = 1; |
Sarah Sharp | d0e96f5 | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 621 | int ret; |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 622 | |
| 623 | if (!xhci->event_ring || !xhci->event_ring->dequeue) { |
| 624 | xhci->error_bitmask |= 1 << 1; |
| 625 | return; |
| 626 | } |
| 627 | |
| 628 | event = xhci->event_ring->dequeue; |
| 629 | /* Does the HC or OS own the TRB? */ |
| 630 | if ((event->event_cmd.flags & TRB_CYCLE) != |
| 631 | xhci->event_ring->cycle_state) { |
| 632 | xhci->error_bitmask |= 1 << 2; |
| 633 | return; |
| 634 | } |
| 635 | |
Sarah Sharp | 0f2a793 | 2009-04-27 19:57:12 -0700 | [diff] [blame] | 636 | /* FIXME: Handle more event types. */ |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 637 | switch ((event->event_cmd.flags & TRB_TYPE_BITMASK)) { |
| 638 | case TRB_TYPE(TRB_COMPLETION): |
| 639 | handle_cmd_completion(xhci, &event->event_cmd); |
| 640 | break; |
Sarah Sharp | 0f2a793 | 2009-04-27 19:57:12 -0700 | [diff] [blame] | 641 | case TRB_TYPE(TRB_PORT_STATUS): |
| 642 | handle_port_status(xhci, event); |
| 643 | update_ptrs = 0; |
| 644 | break; |
Sarah Sharp | d0e96f5 | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 645 | case TRB_TYPE(TRB_TRANSFER): |
| 646 | ret = handle_tx_event(xhci, &event->trans_event); |
| 647 | if (ret < 0) |
| 648 | xhci->error_bitmask |= 1 << 9; |
| 649 | else |
| 650 | update_ptrs = 0; |
| 651 | break; |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 652 | default: |
| 653 | xhci->error_bitmask |= 1 << 3; |
| 654 | } |
| 655 | |
Sarah Sharp | 0f2a793 | 2009-04-27 19:57:12 -0700 | [diff] [blame] | 656 | if (update_ptrs) { |
| 657 | /* Update SW and HC event ring dequeue pointer */ |
| 658 | inc_deq(xhci, xhci->event_ring, true); |
| 659 | set_hc_event_deq(xhci); |
| 660 | } |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 661 | /* Are there more items on the event ring? */ |
| 662 | handle_event(xhci); |
| 663 | } |
| 664 | |
Sarah Sharp | d0e96f5 | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 665 | /**** Endpoint Ring Operations ****/ |
| 666 | |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 667 | /* |
| 668 | * Generic function for queueing a TRB on a ring. |
| 669 | * The caller must have checked to make sure there's room on the ring. |
| 670 | */ |
| 671 | static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, |
| 672 | bool consumer, |
| 673 | u32 field1, u32 field2, u32 field3, u32 field4) |
| 674 | { |
| 675 | struct xhci_generic_trb *trb; |
| 676 | |
| 677 | trb = &ring->enqueue->generic; |
| 678 | trb->field[0] = field1; |
| 679 | trb->field[1] = field2; |
| 680 | trb->field[2] = field3; |
| 681 | trb->field[3] = field4; |
| 682 | inc_enq(xhci, ring, consumer); |
| 683 | } |
| 684 | |
Sarah Sharp | d0e96f5 | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 685 | /* |
| 686 | * Does various checks on the endpoint ring, and makes it ready to queue num_trbs. |
| 687 | * FIXME allocate segments if the ring is full. |
| 688 | */ |
| 689 | static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, |
| 690 | u32 ep_state, unsigned int num_trbs, gfp_t mem_flags) |
| 691 | { |
| 692 | /* Make sure the endpoint has been added to xHC schedule */ |
| 693 | xhci_dbg(xhci, "Endpoint state = 0x%x\n", ep_state); |
| 694 | switch (ep_state) { |
| 695 | case EP_STATE_DISABLED: |
| 696 | /* |
| 697 | * USB core changed config/interfaces without notifying us, |
| 698 | * or hardware is reporting the wrong state. |
| 699 | */ |
| 700 | xhci_warn(xhci, "WARN urb submitted to disabled ep\n"); |
| 701 | return -ENOENT; |
| 702 | case EP_STATE_HALTED: |
| 703 | case EP_STATE_ERROR: |
| 704 | xhci_warn(xhci, "WARN waiting for halt or error on ep " |
| 705 | "to be cleared\n"); |
| 706 | /* FIXME event handling code for error needs to clear it */ |
| 707 | /* XXX not sure if this should be -ENOENT or not */ |
| 708 | return -EINVAL; |
| 709 | case EP_STATE_STOPPED: |
| 710 | case EP_STATE_RUNNING: |
| 711 | break; |
| 712 | default: |
| 713 | xhci_err(xhci, "ERROR unknown endpoint state for ep\n"); |
| 714 | /* |
| 715 | * FIXME issue Configure Endpoint command to try to get the HC |
| 716 | * back into a known state. |
| 717 | */ |
| 718 | return -EINVAL; |
| 719 | } |
| 720 | if (!room_on_ring(xhci, ep_ring, num_trbs)) { |
| 721 | /* FIXME allocate more room */ |
| 722 | xhci_err(xhci, "ERROR no room on ep ring\n"); |
| 723 | return -ENOMEM; |
| 724 | } |
| 725 | return 0; |
| 726 | } |
| 727 | |
| 728 | int xhci_prepare_transfer(struct xhci_hcd *xhci, |
| 729 | struct xhci_virt_device *xdev, |
| 730 | unsigned int ep_index, |
| 731 | unsigned int num_trbs, |
| 732 | struct urb *urb, |
| 733 | struct xhci_td **td, |
| 734 | gfp_t mem_flags) |
| 735 | { |
| 736 | int ret; |
| 737 | |
| 738 | ret = prepare_ring(xhci, xdev->ep_rings[ep_index], |
| 739 | xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK, |
| 740 | num_trbs, mem_flags); |
| 741 | if (ret) |
| 742 | return ret; |
| 743 | *td = kzalloc(sizeof(struct xhci_td), mem_flags); |
| 744 | if (!*td) |
| 745 | return -ENOMEM; |
| 746 | INIT_LIST_HEAD(&(*td)->td_list); |
| 747 | |
| 748 | ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb); |
| 749 | if (unlikely(ret)) { |
| 750 | kfree(*td); |
| 751 | return ret; |
| 752 | } |
| 753 | |
| 754 | (*td)->urb = urb; |
| 755 | urb->hcpriv = (void *) (*td); |
| 756 | /* Add this TD to the tail of the endpoint ring's TD list */ |
| 757 | list_add_tail(&(*td)->td_list, &xdev->ep_rings[ep_index]->td_list); |
| 758 | |
| 759 | return 0; |
| 760 | } |
| 761 | |
Sarah Sharp | 8a96c05 | 2009-04-27 19:59:19 -0700 | [diff] [blame^] | 762 | unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) |
| 763 | { |
| 764 | int num_sgs, num_trbs, running_total, temp, i; |
| 765 | struct scatterlist *sg; |
| 766 | |
| 767 | sg = NULL; |
| 768 | num_sgs = urb->num_sgs; |
| 769 | temp = urb->transfer_buffer_length; |
| 770 | |
| 771 | xhci_dbg(xhci, "count sg list trbs: \n"); |
| 772 | num_trbs = 0; |
| 773 | for_each_sg(urb->sg->sg, sg, num_sgs, i) { |
| 774 | unsigned int previous_total_trbs = num_trbs; |
| 775 | unsigned int len = sg_dma_len(sg); |
| 776 | |
| 777 | /* Scatter gather list entries may cross 64KB boundaries */ |
| 778 | running_total = TRB_MAX_BUFF_SIZE - |
| 779 | (sg_dma_address(sg) & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); |
| 780 | if (running_total != 0) |
| 781 | num_trbs++; |
| 782 | |
| 783 | /* How many more 64KB chunks to transfer, how many more TRBs? */ |
| 784 | while (running_total < sg_dma_len(sg)) { |
| 785 | num_trbs++; |
| 786 | running_total += TRB_MAX_BUFF_SIZE; |
| 787 | } |
| 788 | xhci_dbg(xhci, " sg #%d: dma = %#x, len = %#x (%d), num_trbs = %d\n", |
| 789 | i, sg_dma_address(sg), len, len, |
| 790 | num_trbs - previous_total_trbs); |
| 791 | |
| 792 | len = min_t(int, len, temp); |
| 793 | temp -= len; |
| 794 | if (temp == 0) |
| 795 | break; |
| 796 | } |
| 797 | xhci_dbg(xhci, "\n"); |
| 798 | if (!in_interrupt()) |
| 799 | dev_dbg(&urb->dev->dev, "ep %#x - urb len = %d, sglist used, num_trbs = %d\n", |
| 800 | urb->ep->desc.bEndpointAddress, |
| 801 | urb->transfer_buffer_length, |
| 802 | num_trbs); |
| 803 | return num_trbs; |
| 804 | } |
| 805 | |
| 806 | void check_trb_math(struct urb *urb, int num_trbs, int running_total) |
| 807 | { |
| 808 | if (num_trbs != 0) |
| 809 | dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated number of " |
| 810 | "TRBs, %d left\n", __func__, |
| 811 | urb->ep->desc.bEndpointAddress, num_trbs); |
| 812 | if (running_total != urb->transfer_buffer_length) |
| 813 | dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, " |
| 814 | "queued %#x (%d), asked for %#x (%d)\n", |
| 815 | __func__, |
| 816 | urb->ep->desc.bEndpointAddress, |
| 817 | running_total, running_total, |
| 818 | urb->transfer_buffer_length, |
| 819 | urb->transfer_buffer_length); |
| 820 | } |
| 821 | |
| 822 | void giveback_first_trb(struct xhci_hcd *xhci, int slot_id, |
| 823 | unsigned int ep_index, int start_cycle, |
| 824 | struct xhci_generic_trb *start_trb, struct xhci_td *td) |
| 825 | { |
| 826 | u32 field; |
| 827 | |
| 828 | /* |
| 829 | * Pass all the TRBs to the hardware at once and make sure this write |
| 830 | * isn't reordered. |
| 831 | */ |
| 832 | wmb(); |
| 833 | start_trb->field[3] |= start_cycle; |
| 834 | field = xhci_readl(xhci, &xhci->dba->doorbell[slot_id]) & DB_MASK; |
| 835 | xhci_writel(xhci, field | EPI_TO_DB(ep_index), |
| 836 | &xhci->dba->doorbell[slot_id]); |
| 837 | /* Flush PCI posted writes */ |
| 838 | xhci_readl(xhci, &xhci->dba->doorbell[slot_id]); |
| 839 | } |
| 840 | |
| 841 | int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, |
| 842 | struct urb *urb, int slot_id, unsigned int ep_index) |
| 843 | { |
| 844 | struct xhci_ring *ep_ring; |
| 845 | unsigned int num_trbs; |
| 846 | struct xhci_td *td; |
| 847 | struct scatterlist *sg; |
| 848 | int num_sgs; |
| 849 | int trb_buff_len, this_sg_len, running_total; |
| 850 | bool first_trb; |
| 851 | u64 addr; |
| 852 | |
| 853 | struct xhci_generic_trb *start_trb; |
| 854 | int start_cycle; |
| 855 | |
| 856 | ep_ring = xhci->devs[slot_id]->ep_rings[ep_index]; |
| 857 | num_trbs = count_sg_trbs_needed(xhci, urb); |
| 858 | num_sgs = urb->num_sgs; |
| 859 | |
| 860 | trb_buff_len = xhci_prepare_transfer(xhci, xhci->devs[slot_id], |
| 861 | ep_index, num_trbs, urb, &td, mem_flags); |
| 862 | if (trb_buff_len < 0) |
| 863 | return trb_buff_len; |
| 864 | /* |
| 865 | * Don't give the first TRB to the hardware (by toggling the cycle bit) |
| 866 | * until we've finished creating all the other TRBs. The ring's cycle |
| 867 | * state may change as we enqueue the other TRBs, so save it too. |
| 868 | */ |
| 869 | start_trb = &ep_ring->enqueue->generic; |
| 870 | start_cycle = ep_ring->cycle_state; |
| 871 | |
| 872 | running_total = 0; |
| 873 | /* |
| 874 | * How much data is in the first TRB? |
| 875 | * |
| 876 | * There are three forces at work for TRB buffer pointers and lengths: |
| 877 | * 1. We don't want to walk off the end of this sg-list entry buffer. |
| 878 | * 2. The transfer length that the driver requested may be smaller than |
| 879 | * the amount of memory allocated for this scatter-gather list. |
| 880 | * 3. TRBs buffers can't cross 64KB boundaries. |
| 881 | */ |
| 882 | sg = urb->sg->sg; |
| 883 | addr = (u64) sg_dma_address(sg); |
| 884 | this_sg_len = sg_dma_len(sg); |
| 885 | trb_buff_len = TRB_MAX_BUFF_SIZE - |
| 886 | (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); |
| 887 | trb_buff_len = min_t(int, trb_buff_len, this_sg_len); |
| 888 | if (trb_buff_len > urb->transfer_buffer_length) |
| 889 | trb_buff_len = urb->transfer_buffer_length; |
| 890 | xhci_dbg(xhci, "First length to xfer from 1st sglist entry = %u\n", |
| 891 | trb_buff_len); |
| 892 | |
| 893 | first_trb = true; |
| 894 | /* Queue the first TRB, even if it's zero-length */ |
| 895 | do { |
| 896 | u32 field = 0; |
| 897 | |
| 898 | /* Don't change the cycle bit of the first TRB until later */ |
| 899 | if (first_trb) |
| 900 | first_trb = false; |
| 901 | else |
| 902 | field |= ep_ring->cycle_state; |
| 903 | |
| 904 | /* Chain all the TRBs together; clear the chain bit in the last |
| 905 | * TRB to indicate it's the last TRB in the chain. |
| 906 | */ |
| 907 | if (num_trbs > 1) { |
| 908 | field |= TRB_CHAIN; |
| 909 | } else { |
| 910 | /* FIXME - add check for ZERO_PACKET flag before this */ |
| 911 | td->last_trb = ep_ring->enqueue; |
| 912 | field |= TRB_IOC; |
| 913 | } |
| 914 | xhci_dbg(xhci, " sg entry: dma = %#x, len = %#x (%d), " |
| 915 | "64KB boundary at %#x, end dma = %#x\n", |
| 916 | (unsigned int) addr, trb_buff_len, trb_buff_len, |
| 917 | (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1), |
| 918 | (unsigned int) addr + trb_buff_len); |
| 919 | if (TRB_MAX_BUFF_SIZE - |
| 920 | (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)) < trb_buff_len) { |
| 921 | xhci_warn(xhci, "WARN: sg dma xfer crosses 64KB boundaries!\n"); |
| 922 | xhci_dbg(xhci, "Next boundary at %#x, end dma = %#x\n", |
| 923 | (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1), |
| 924 | (unsigned int) addr + trb_buff_len); |
| 925 | } |
| 926 | queue_trb(xhci, ep_ring, false, |
| 927 | (u32) addr, |
| 928 | (u32) ((u64) addr >> 32), |
| 929 | TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0), |
| 930 | /* We always want to know if the TRB was short, |
| 931 | * or we won't get an event when it completes. |
| 932 | * (Unless we use event data TRBs, which are a |
| 933 | * waste of space and HC resources.) |
| 934 | */ |
| 935 | field | TRB_ISP | TRB_TYPE(TRB_NORMAL)); |
| 936 | --num_trbs; |
| 937 | running_total += trb_buff_len; |
| 938 | |
| 939 | /* Calculate length for next transfer -- |
| 940 | * Are we done queueing all the TRBs for this sg entry? |
| 941 | */ |
| 942 | this_sg_len -= trb_buff_len; |
| 943 | if (this_sg_len == 0) { |
| 944 | --num_sgs; |
| 945 | if (num_sgs == 0) |
| 946 | break; |
| 947 | sg = sg_next(sg); |
| 948 | addr = (u64) sg_dma_address(sg); |
| 949 | this_sg_len = sg_dma_len(sg); |
| 950 | } else { |
| 951 | addr += trb_buff_len; |
| 952 | } |
| 953 | |
| 954 | trb_buff_len = TRB_MAX_BUFF_SIZE - |
| 955 | (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); |
| 956 | trb_buff_len = min_t(int, trb_buff_len, this_sg_len); |
| 957 | if (running_total + trb_buff_len > urb->transfer_buffer_length) |
| 958 | trb_buff_len = |
| 959 | urb->transfer_buffer_length - running_total; |
| 960 | } while (running_total < urb->transfer_buffer_length); |
| 961 | |
| 962 | check_trb_math(urb, num_trbs, running_total); |
| 963 | giveback_first_trb(xhci, slot_id, ep_index, start_cycle, start_trb, td); |
| 964 | return 0; |
| 965 | } |
| 966 | |
Sarah Sharp | b10de14 | 2009-04-27 19:58:50 -0700 | [diff] [blame] | 967 | /* This is very similar to what ehci-q.c qtd_fill() does */ |
| 968 | int queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, |
| 969 | struct urb *urb, int slot_id, unsigned int ep_index) |
| 970 | { |
| 971 | struct xhci_ring *ep_ring; |
| 972 | struct xhci_td *td; |
| 973 | int num_trbs; |
| 974 | struct xhci_generic_trb *start_trb; |
| 975 | bool first_trb; |
| 976 | int start_cycle; |
| 977 | u32 field; |
| 978 | |
| 979 | int running_total, trb_buff_len, ret; |
| 980 | u64 addr; |
| 981 | |
Sarah Sharp | 8a96c05 | 2009-04-27 19:59:19 -0700 | [diff] [blame^] | 982 | if (urb->sg) |
| 983 | return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index); |
| 984 | |
Sarah Sharp | b10de14 | 2009-04-27 19:58:50 -0700 | [diff] [blame] | 985 | ep_ring = xhci->devs[slot_id]->ep_rings[ep_index]; |
| 986 | |
| 987 | num_trbs = 0; |
| 988 | /* How much data is (potentially) left before the 64KB boundary? */ |
| 989 | running_total = TRB_MAX_BUFF_SIZE - |
| 990 | (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); |
| 991 | |
| 992 | /* If there's some data on this 64KB chunk, or we have to send a |
| 993 | * zero-length transfer, we need at least one TRB |
| 994 | */ |
| 995 | if (running_total != 0 || urb->transfer_buffer_length == 0) |
| 996 | num_trbs++; |
| 997 | /* How many more 64KB chunks to transfer, how many more TRBs? */ |
| 998 | while (running_total < urb->transfer_buffer_length) { |
| 999 | num_trbs++; |
| 1000 | running_total += TRB_MAX_BUFF_SIZE; |
| 1001 | } |
| 1002 | /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */ |
| 1003 | |
| 1004 | if (!in_interrupt()) |
Sarah Sharp | 8a96c05 | 2009-04-27 19:59:19 -0700 | [diff] [blame^] | 1005 | dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d), addr = %#x, num_trbs = %d\n", |
Sarah Sharp | b10de14 | 2009-04-27 19:58:50 -0700 | [diff] [blame] | 1006 | urb->ep->desc.bEndpointAddress, |
Sarah Sharp | 8a96c05 | 2009-04-27 19:59:19 -0700 | [diff] [blame^] | 1007 | urb->transfer_buffer_length, |
| 1008 | urb->transfer_buffer_length, |
| 1009 | urb->transfer_dma, |
Sarah Sharp | b10de14 | 2009-04-27 19:58:50 -0700 | [diff] [blame] | 1010 | num_trbs); |
Sarah Sharp | 8a96c05 | 2009-04-27 19:59:19 -0700 | [diff] [blame^] | 1011 | |
Sarah Sharp | b10de14 | 2009-04-27 19:58:50 -0700 | [diff] [blame] | 1012 | ret = xhci_prepare_transfer(xhci, xhci->devs[slot_id], ep_index, |
| 1013 | num_trbs, urb, &td, mem_flags); |
| 1014 | if (ret < 0) |
| 1015 | return ret; |
| 1016 | |
| 1017 | /* |
| 1018 | * Don't give the first TRB to the hardware (by toggling the cycle bit) |
| 1019 | * until we've finished creating all the other TRBs. The ring's cycle |
| 1020 | * state may change as we enqueue the other TRBs, so save it too. |
| 1021 | */ |
| 1022 | start_trb = &ep_ring->enqueue->generic; |
| 1023 | start_cycle = ep_ring->cycle_state; |
| 1024 | |
| 1025 | running_total = 0; |
| 1026 | /* How much data is in the first TRB? */ |
| 1027 | addr = (u64) urb->transfer_dma; |
| 1028 | trb_buff_len = TRB_MAX_BUFF_SIZE - |
| 1029 | (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); |
| 1030 | if (urb->transfer_buffer_length < trb_buff_len) |
| 1031 | trb_buff_len = urb->transfer_buffer_length; |
| 1032 | |
| 1033 | first_trb = true; |
| 1034 | |
| 1035 | /* Queue the first TRB, even if it's zero-length */ |
| 1036 | do { |
| 1037 | field = 0; |
| 1038 | |
| 1039 | /* Don't change the cycle bit of the first TRB until later */ |
| 1040 | if (first_trb) |
| 1041 | first_trb = false; |
| 1042 | else |
| 1043 | field |= ep_ring->cycle_state; |
| 1044 | |
| 1045 | /* Chain all the TRBs together; clear the chain bit in the last |
| 1046 | * TRB to indicate it's the last TRB in the chain. |
| 1047 | */ |
| 1048 | if (num_trbs > 1) { |
| 1049 | field |= TRB_CHAIN; |
| 1050 | } else { |
| 1051 | /* FIXME - add check for ZERO_PACKET flag before this */ |
| 1052 | td->last_trb = ep_ring->enqueue; |
| 1053 | field |= TRB_IOC; |
| 1054 | } |
| 1055 | queue_trb(xhci, ep_ring, false, |
| 1056 | (u32) addr, |
| 1057 | (u32) ((u64) addr >> 32), |
| 1058 | TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0), |
| 1059 | /* We always want to know if the TRB was short, |
| 1060 | * or we won't get an event when it completes. |
| 1061 | * (Unless we use event data TRBs, which are a |
| 1062 | * waste of space and HC resources.) |
| 1063 | */ |
| 1064 | field | TRB_ISP | TRB_TYPE(TRB_NORMAL)); |
| 1065 | --num_trbs; |
| 1066 | running_total += trb_buff_len; |
| 1067 | |
| 1068 | /* Calculate length for next transfer */ |
| 1069 | addr += trb_buff_len; |
| 1070 | trb_buff_len = urb->transfer_buffer_length - running_total; |
| 1071 | if (trb_buff_len > TRB_MAX_BUFF_SIZE) |
| 1072 | trb_buff_len = TRB_MAX_BUFF_SIZE; |
| 1073 | } while (running_total < urb->transfer_buffer_length); |
| 1074 | |
Sarah Sharp | 8a96c05 | 2009-04-27 19:59:19 -0700 | [diff] [blame^] | 1075 | check_trb_math(urb, num_trbs, running_total); |
| 1076 | giveback_first_trb(xhci, slot_id, ep_index, start_cycle, start_trb, td); |
Sarah Sharp | b10de14 | 2009-04-27 19:58:50 -0700 | [diff] [blame] | 1077 | return 0; |
| 1078 | } |
| 1079 | |
Sarah Sharp | d0e96f5 | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 1080 | /* Caller must have locked xhci->lock */ |
| 1081 | int queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, |
| 1082 | struct urb *urb, int slot_id, unsigned int ep_index) |
| 1083 | { |
| 1084 | struct xhci_ring *ep_ring; |
| 1085 | int num_trbs; |
| 1086 | int ret; |
| 1087 | struct usb_ctrlrequest *setup; |
| 1088 | struct xhci_generic_trb *start_trb; |
| 1089 | int start_cycle; |
| 1090 | u32 field; |
| 1091 | struct xhci_td *td; |
| 1092 | |
| 1093 | ep_ring = xhci->devs[slot_id]->ep_rings[ep_index]; |
| 1094 | |
| 1095 | /* |
| 1096 | * Need to copy setup packet into setup TRB, so we can't use the setup |
| 1097 | * DMA address. |
| 1098 | */ |
| 1099 | if (!urb->setup_packet) |
| 1100 | return -EINVAL; |
| 1101 | |
| 1102 | if (!in_interrupt()) |
| 1103 | xhci_dbg(xhci, "Queueing ctrl tx for slot id %d, ep %d\n", |
| 1104 | slot_id, ep_index); |
| 1105 | /* 1 TRB for setup, 1 for status */ |
| 1106 | num_trbs = 2; |
| 1107 | /* |
| 1108 | * Don't need to check if we need additional event data and normal TRBs, |
| 1109 | * since data in control transfers will never get bigger than 16MB |
| 1110 | * XXX: can we get a buffer that crosses 64KB boundaries? |
| 1111 | */ |
| 1112 | if (urb->transfer_buffer_length > 0) |
| 1113 | num_trbs++; |
| 1114 | ret = xhci_prepare_transfer(xhci, xhci->devs[slot_id], ep_index, num_trbs, |
| 1115 | urb, &td, mem_flags); |
| 1116 | if (ret < 0) |
| 1117 | return ret; |
| 1118 | |
| 1119 | /* |
| 1120 | * Don't give the first TRB to the hardware (by toggling the cycle bit) |
| 1121 | * until we've finished creating all the other TRBs. The ring's cycle |
| 1122 | * state may change as we enqueue the other TRBs, so save it too. |
| 1123 | */ |
| 1124 | start_trb = &ep_ring->enqueue->generic; |
| 1125 | start_cycle = ep_ring->cycle_state; |
| 1126 | |
| 1127 | /* Queue setup TRB - see section 6.4.1.2.1 */ |
| 1128 | /* FIXME better way to translate setup_packet into two u32 fields? */ |
| 1129 | setup = (struct usb_ctrlrequest *) urb->setup_packet; |
| 1130 | queue_trb(xhci, ep_ring, false, |
| 1131 | /* FIXME endianness is probably going to bite my ass here. */ |
| 1132 | setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16, |
| 1133 | setup->wIndex | setup->wLength << 16, |
| 1134 | TRB_LEN(8) | TRB_INTR_TARGET(0), |
| 1135 | /* Immediate data in pointer */ |
| 1136 | TRB_IDT | TRB_TYPE(TRB_SETUP)); |
| 1137 | |
| 1138 | /* If there's data, queue data TRBs */ |
| 1139 | field = 0; |
| 1140 | if (urb->transfer_buffer_length > 0) { |
| 1141 | if (setup->bRequestType & USB_DIR_IN) |
| 1142 | field |= TRB_DIR_IN; |
| 1143 | queue_trb(xhci, ep_ring, false, |
| 1144 | lower_32_bits(urb->transfer_dma), |
| 1145 | upper_32_bits(urb->transfer_dma), |
| 1146 | TRB_LEN(urb->transfer_buffer_length) | TRB_INTR_TARGET(0), |
| 1147 | /* Event on short tx */ |
| 1148 | field | TRB_ISP | TRB_TYPE(TRB_DATA) | ep_ring->cycle_state); |
| 1149 | } |
| 1150 | |
| 1151 | /* Save the DMA address of the last TRB in the TD */ |
| 1152 | td->last_trb = ep_ring->enqueue; |
| 1153 | |
| 1154 | /* Queue status TRB - see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */ |
| 1155 | /* If the device sent data, the status stage is an OUT transfer */ |
| 1156 | if (urb->transfer_buffer_length > 0 && setup->bRequestType & USB_DIR_IN) |
| 1157 | field = 0; |
| 1158 | else |
| 1159 | field = TRB_DIR_IN; |
| 1160 | queue_trb(xhci, ep_ring, false, |
| 1161 | 0, |
| 1162 | 0, |
| 1163 | TRB_INTR_TARGET(0), |
| 1164 | /* Event on completion */ |
| 1165 | field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state); |
| 1166 | |
Sarah Sharp | 8a96c05 | 2009-04-27 19:59:19 -0700 | [diff] [blame^] | 1167 | giveback_first_trb(xhci, slot_id, ep_index, start_cycle, start_trb, td); |
Sarah Sharp | d0e96f5 | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 1168 | return 0; |
| 1169 | } |
| 1170 | |
| 1171 | /**** Command Ring Operations ****/ |
| 1172 | |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 1173 | /* Generic function for queueing a command TRB on the command ring */ |
| 1174 | static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, u32 field3, u32 field4) |
| 1175 | { |
| 1176 | if (!room_on_ring(xhci, xhci->cmd_ring, 1)) { |
| 1177 | if (!in_interrupt()) |
| 1178 | xhci_err(xhci, "ERR: No room for command on command ring\n"); |
| 1179 | return -ENOMEM; |
| 1180 | } |
| 1181 | queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3, |
| 1182 | field4 | xhci->cmd_ring->cycle_state); |
| 1183 | return 0; |
| 1184 | } |
| 1185 | |
| 1186 | /* Queue a no-op command on the command ring */ |
| 1187 | static int queue_cmd_noop(struct xhci_hcd *xhci) |
| 1188 | { |
| 1189 | return queue_command(xhci, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP)); |
| 1190 | } |
| 1191 | |
| 1192 | /* |
| 1193 | * Place a no-op command on the command ring to test the command and |
| 1194 | * event ring. |
| 1195 | */ |
| 1196 | void *setup_one_noop(struct xhci_hcd *xhci) |
| 1197 | { |
| 1198 | if (queue_cmd_noop(xhci) < 0) |
| 1199 | return NULL; |
| 1200 | xhci->noops_submitted++; |
| 1201 | return ring_cmd_db; |
| 1202 | } |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 1203 | |
| 1204 | /* Queue a slot enable or disable request on the command ring */ |
| 1205 | int queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id) |
| 1206 | { |
| 1207 | return queue_command(xhci, 0, 0, 0, |
| 1208 | TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id)); |
| 1209 | } |
| 1210 | |
| 1211 | /* Queue an address device command TRB */ |
| 1212 | int queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id) |
| 1213 | { |
| 1214 | return queue_command(xhci, in_ctx_ptr, 0, 0, |
| 1215 | TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id)); |
| 1216 | } |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1217 | |
| 1218 | /* Queue a configure endpoint command TRB */ |
| 1219 | int queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id) |
| 1220 | { |
| 1221 | return queue_command(xhci, in_ctx_ptr, 0, 0, |
| 1222 | TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id)); |
| 1223 | } |