Blame - arch/arm/mach-msm/Kconfig - android_kernel_htc_msm8960

blob: 0c74fd2fbadde833c68e83037a7377492fcf18e0 [file] [log] [blame]

Brian Swetland	1637de0	2008-09-09 07:13:33 -0700	[diff] [blame]	1	if ARCH_MSM
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	2
Stepan Moskovchenko	1cd286f	2011-08-03 19:03:02 -0700	[diff] [blame]	3	menu "MSM SoC Type"
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	4
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	5	config ARCH_MSM7X01A
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	6	bool "MSM7x00A / MSM7x01A"
				7	select ARCH_MSM_ARM11
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	8	select MSM_VIC
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	9	select CPU_V6
David Brown	74d10d7	2011-05-16 13:57:39 -0700	[diff] [blame]	10	select GPIO_MSM_V1
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	11	select MSM_REMOTE_SPINLOCK_SWP
				12
				13	config ARCH_MSM7X25
				14	bool "MSM7x25"
				15	select ARCH_MSM_ARM11
				16	select MSM_VIC
				17	select CPU_V6
Steve Muckle	f132c6c	2012-06-06 18:30:57 -0700	[diff] [blame]	18	select GPIO_MSM_V1
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	19	select MSM_REMOTE_SPINLOCK_SWP
Taniya Das	be561a0	2011-10-12 09:53:11 +0530	[diff] [blame]	20	select MULTI_IRQ_HANDLER
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	21
				22	config ARCH_MSM7X27
				23	bool "MSM7x27"
				24	select ARCH_MSM_ARM11 if MSM_SOC_REV_NONE
				25	select ARCH_HAS_BARRIERS if MSM_SOC_REV_NONE
				26	select ARCH_MSM_CORTEX_A5 if MSM_SOC_REV_A
				27	select MSM_VIC
				28	select CPU_V6 if MSM_SOC_REV_NONE
				29	select CPU_V7 if MSM_SOC_REV_A
Steve Muckle	f132c6c	2012-06-06 18:30:57 -0700	[diff] [blame]	30	select GPIO_MSM_V1
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	31	select MSM_REMOTE_SPINLOCK_SWP if MSM_SOC_REV_NONE
				32	select MSM_GPIOMUX
				33	select REGULATOR
Taniya Das	be561a0	2011-10-12 09:53:11 +0530	[diff] [blame]	34	select MULTI_IRQ_HANDLER
Pankaj Kumar	75c86fd	2011-10-01 18:51:09 +0530	[diff] [blame]	35	select MSM_PROC_COMM_REGULATOR
Laura Abbott	1fbd2e6	2011-12-18 10:26:46 -0800	[diff] [blame]	36	select CLEANCACHE
				37	select QCACHE
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	38	select MSM_PM2 if PM
Krishna Vanka	e292205	2012-03-02 09:59:12 +0530	[diff] [blame]	39	select MSM_RUN_QUEUE_STATS if MSM_SOC_REV_A
Taniya Das	d4c39f9	2012-05-14 17:41:49 +0530	[diff] [blame]	40	select DONT_MAP_HOLE_AFTER_MEMBANK0
Trilok Soni	b856ab9	2012-06-26 14:33:28 +0530	[diff] [blame]	41	select MIGHT_HAVE_CACHE_L2X0
Taniya Das	cd1d023	2012-07-03 17:50:47 +0530	[diff] [blame]	42	select MSM_MODEM_RESTART
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	43
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	44	config ARCH_MSM7X30
				45	bool "MSM7x30"
				46	select ARCH_MSM_SCORPION
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	47	select MSM_VIC
				48	select CPU_V7
David Brown	74d10d7	2011-05-16 13:57:39 -0700	[diff] [blame]	49	select GPIO_MSM_V1
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	50	select MSM_REMOTE_SPINLOCK_DEKKERS
				51	select ARCH_SPARSEMEM_ENABLE
Laura Abbott	78593b5	2011-09-26 18:48:14 -0700	[diff] [blame]	52	select ARCH_HAS_HOLES_MEMORYMODEL
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	53	select MEMORY_HOTPLUG
				54	select MEMORY_HOTREMOVE
Bryan Huntsman	ea43964	2011-11-23 12:34:05 -0800	[diff] [blame]	55	select ARCH_ENABLE_MEMORY_HOTPLUG
				56	select ARCH_ENABLE_MEMORY_HOTREMOVE
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	57	select MIGRATION
				58	select ARCH_MEMORY_PROBE
				59	select ARCH_MEMORY_REMOVE
Gregory Bean	ab78cde	2010-09-01 16:26:12 -0700	[diff] [blame]	60	select MSM_GPIOMUX
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	61	select RESERVE_FIRST_PAGE
				62	select MSM_DALRPC
				63	select MSM_SPM_V1
				64	select REGULATOR
Justin Paupore	637a25d	2011-07-14 17:11:04 -0700	[diff] [blame]	65	select MSM_PROC_COMM_REGULATOR
Taniya Das	bae99fb	2011-10-12 09:55:13 +0530	[diff] [blame]	66	select MULTI_IRQ_HANDLER
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	67	select MSM_PM2 if PM
Chintan Pandya	bb02176	2012-06-21 15:03:29 +0530	[diff] [blame]	68	select HOLES_IN_ZONE if SPARSEMEM
Taniya Das	cd1d023	2012-07-03 17:50:47 +0530	[diff] [blame]	69	select MSM_MODEM_RESTART
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	70
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	71	config ARCH_QSD8X50
				72	bool "QSD8X50"
				73	select ARCH_MSM_SCORPION
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	74	select MSM_VIC
				75	select CPU_V7
David Brown	74d10d7	2011-05-16 13:57:39 -0700	[diff] [blame]	76	select GPIO_MSM_V1
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	77	select MSM_REMOTE_SPINLOCK_LDREX
				78	select CPU_USE_DOMAINS
				79	select EMULATE_DOMAIN_MANAGER_V7
Gregory Bean	ab78cde	2010-09-01 16:26:12 -0700	[diff] [blame]	80	select MSM_GPIOMUX
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	81	select MSM_DALRPC
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	82	select MSM_PM2 if PM
Taniya Das	cd1d023	2012-07-03 17:50:47 +0530	[diff] [blame]	83	select MSM_MODEM_RESTART
Daniel Walker	46fe5f2	2010-08-18 11:00:25 -0700	[diff] [blame]	84
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	85	config ARCH_MSM8X60
				86	bool "MSM8X60"
Jeff Ohlstein	e14411d	2010-11-30 13:06:36 -0800	[diff] [blame]	87	select ARCH_MSM_SCORPIONMP
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	88	select SMP_PARALLEL_START if SMP
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	89	select ARM_GIC
				90	select CPU_V7
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	91	select MSM_REMOTE_SPINLOCK_LDREX
				92	select ARCH_REQUIRE_GPIOLIB
				93	select MSM_ADM3
				94	select REGULATOR
Matt Wagantall	9274df9	2011-12-15 11:11:05 -0800	[diff] [blame]	95	select MSM_RPM_REGULATOR
David Brown	1a5ab4b	2011-05-16 15:53:38 -0700	[diff] [blame]	96	select GPIO_MSM_V2
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	97	select MSM_PIL
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	98	select ARCH_HAS_CPU_IDLE_WAIT
				99	select MSM_DIRECT_SCLK_ACCESS
				100	select MSM_RPM
				101	select MSM_XO
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	102	select MSM_GPIOMUX
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	103	select MSM_BUS_SCALING
				104	select MSM_SECURE_IO
				105	select MSM_DALRPC
				106	select MSM_QDSP6_APR
Harmandeep Singh	c35fa07d	2012-05-31 07:08:59 -0700	[diff] [blame]	107	select MSM_QDSP6_CODECS
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	108	select MSM_NATIVE_RESTART
				109	select ARCH_INLINE_SPIN_TRYLOCK
				110	select ARCH_INLINE_SPIN_TRYLOCK_BH
				111	select ARCH_INLINE_SPIN_LOCK
				112	select ARCH_INLINE_SPIN_LOCK_BH
				113	select ARCH_INLINE_SPIN_LOCK_IRQ
				114	select ARCH_INLINE_SPIN_LOCK_IRQSAVE
				115	select ARCH_INLINE_SPIN_UNLOCK
				116	select ARCH_INLINE_SPIN_UNLOCK_BH
				117	select ARCH_INLINE_SPIN_UNLOCK_IRQ
				118	select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
				119	select ARCH_INLINE_READ_TRYLOCK
				120	select ARCH_INLINE_READ_LOCK
				121	select ARCH_INLINE_READ_LOCK_BH
				122	select ARCH_INLINE_READ_LOCK_IRQ
				123	select ARCH_INLINE_READ_LOCK_IRQSAVE
				124	select ARCH_INLINE_READ_UNLOCK
				125	select ARCH_INLINE_READ_UNLOCK_BH
				126	select ARCH_INLINE_READ_UNLOCK_IRQ
				127	select ARCH_INLINE_READ_UNLOCK_IRQRESTORE
				128	select ARCH_INLINE_WRITE_TRYLOCK
				129	select ARCH_INLINE_WRITE_LOCK
				130	select ARCH_INLINE_WRITE_LOCK_BH
				131	select ARCH_INLINE_WRITE_LOCK_IRQ
				132	select ARCH_INLINE_WRITE_LOCK_IRQSAVE
				133	select ARCH_INLINE_WRITE_UNLOCK
				134	select ARCH_INLINE_WRITE_UNLOCK_BH
				135	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
				136	select CPU_HAS_L2_PMU
				137	select MSM_SPM_V1
Stephen Boyd	2a1eb58	2010-08-27 10:01:23 -0700	[diff] [blame]	138	select MSM_SCM if SMP
Marc Zyngier	89bdafd1	2011-12-22 11:39:20 +0530	[diff] [blame]	139	select MULTI_IRQ_HANDLER
Laura Abbott	46505f6	2011-11-02 18:06:55 -0700	[diff] [blame]	140	select MSM_MULTIMEDIA_USE_ION
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	141	select MSM_PM8X60 if PM
Krishna Vanka	e292205	2012-03-02 09:59:12 +0530	[diff] [blame]	142	select MSM_RUN_QUEUE_STATS
Laura Abbott	b14ed96	2012-01-30 14:18:08 -0800	[diff] [blame]	143	select ARM_HAS_SG_CHAIN
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	144
Stepan Moskovchenko	f441ca2	2010-12-01 19:31:16 -0800	[diff] [blame]	145	config ARCH_MSM8960
				146	bool "MSM8960"
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	147	select ARCH_MSM_KRAITMP
Stepan Moskovchenko	f441ca2	2010-12-01 19:31:16 -0800	[diff] [blame]	148	select ARM_GIC
				149	select CPU_V7
Steve Muckle	f132c6c	2012-06-06 18:30:57 -0700	[diff] [blame]	150	select GPIO_MSM_V2
Stepan Moskovchenko	f441ca2	2010-12-01 19:31:16 -0800	[diff] [blame]	151	select MSM_GPIOMUX
				152	select MSM_SCM if SMP
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	153	select MSM_DIRECT_SCLK_ACCESS
				154	select REGULATOR
Matt Wagantall	9274df9	2011-12-15 11:11:05 -0800	[diff] [blame]	155	select MSM_RPM_REGULATOR
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	156	select MSM_RPM
				157	select MSM_XO
				158	select MSM_QDSP6_APR
Harmandeep Singh	c35fa07d	2012-05-31 07:08:59 -0700	[diff] [blame]	159	select MSM_QDSP6_CODECS
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	160	select MSM_PIL
				161	select MSM_AUDIO_QDSP6 if SND_SOC
				162	select CPU_HAS_L2_PMU
				163	select MSM_SPM_V2
				164	select MSM_L2_SPM
				165	select MSM_NATIVE_RESTART
Stepan Moskovchenko	082952d	2011-10-18 17:27:08 -0700	[diff] [blame]	166	select DONT_MAP_HOLE_AFTER_MEMBANK0
				167	select MSM_REMOTE_SPINLOCK_SFPB
Stepan Moskovchenko	082952d	2011-10-18 17:27:08 -0700	[diff] [blame]	168	select ARCH_SPARSEMEM_ENABLE
				169	select ARCH_HAS_HOLES_MEMORYMODEL
Larry Bassel	d4d82c9	2011-12-07 09:52:49 -0800	[diff] [blame]	170	select CLEANCACHE
				171	select QCACHE
Laura Abbott	6d61a91	2011-10-27 16:44:14 -0700	[diff] [blame]	172	select MSM_MULTIMEDIA_USE_ION
Marc Zyngier	89bdafd1	2011-12-22 11:39:20 +0530	[diff] [blame]	173	select MULTI_IRQ_HANDLER
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	174	select MSM_PM8X60 if PM
Laura Abbott	085dd20	2012-03-30 14:02:34 -0700	[diff] [blame]	175	select HOLES_IN_ZONE if SPARSEMEM
Krishna Vanka	e292205	2012-03-02 09:59:12 +0530	[diff] [blame]	176	select MSM_RUN_QUEUE_STATS
Laura Abbott	b14ed96	2012-01-30 14:18:08 -0800	[diff] [blame]	177	select ARM_HAS_SG_CHAIN
Stepan Moskovchenko	196f86e	2012-07-13 20:40:46 -0700	[diff] [blame]	178	select MSM_KRAIT_WFE_FIXUP
Stepan Moskovchenko	f441ca2	2010-12-01 19:31:16 -0800	[diff] [blame]	179
Stepan Moskovchenko	082952d	2011-10-18 17:27:08 -0700	[diff] [blame]	180	config ARCH_MSM8930
				181	bool "MSM8930"
				182	select ARCH_MSM_KRAITMP
				183	select ARM_GIC
				184	select CPU_V7
Steve Muckle	f132c6c	2012-06-06 18:30:57 -0700	[diff] [blame]	185	select GPIO_MSM_V2
Stepan Moskovchenko	082952d	2011-10-18 17:27:08 -0700	[diff] [blame]	186	select MSM_GPIOMUX
				187	select MSM_SCM if SMP
				188	select MSM_DIRECT_SCLK_ACCESS
				189	select REGULATOR
David Collins	5779cea	2012-01-05 15:09:21 -0800	[diff] [blame]	190	select MSM_RPM_REGULATOR
Stepan Moskovchenko	082952d	2011-10-18 17:27:08 -0700	[diff] [blame]	191	select MSM_RPM
				192	select MSM_XO
				193	select MSM_QDSP6_APR
Harmandeep Singh	c35fa07d	2012-05-31 07:08:59 -0700	[diff] [blame]	194	select MSM_QDSP6_CODECS
Stepan Moskovchenko	082952d	2011-10-18 17:27:08 -0700	[diff] [blame]	195	select MSM_PIL
				196	select MSM_AUDIO_QDSP6 if SND_SOC
				197	select CPU_HAS_L2_PMU
				198	select MSM_SPM_V2
				199	select MSM_L2_SPM
				200	select MSM_NATIVE_RESTART
				201	select DONT_MAP_HOLE_AFTER_MEMBANK0
Eric Holmberg	eab1073	2011-09-23 19:44:43 -0600	[diff] [blame]	202	select MSM_REMOTE_SPINLOCK_SFPB
Larry Bassel	f74479e	2011-09-08 11:07:52 -0700	[diff] [blame]	203	select ARCH_SPARSEMEM_ENABLE
				204	select ARCH_HAS_HOLES_MEMORYMODEL
Baruch Eruchimovitch	e9cbfc1	2011-10-09 19:47:08 +0200	[diff] [blame]	205	select MSM_ULTRASOUND
Marc Zyngier	89bdafd1	2011-12-22 11:39:20 +0530	[diff] [blame]	206	select MULTI_IRQ_HANDLER
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	207	select MSM_PM8X60 if PM
Laura Abbott	085dd20	2012-03-30 14:02:34 -0700	[diff] [blame]	208	select HOLES_IN_ZONE if SPARSEMEM
Laura Abbott	b14ed96	2012-01-30 14:18:08 -0800	[diff] [blame]	209	select ARM_HAS_SG_CHAIN
Stepan Moskovchenko	196f86e	2012-07-13 20:40:46 -0700	[diff] [blame]	210	select MSM_KRAIT_WFE_FIXUP
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	211
				212	config ARCH_APQ8064
				213	bool "APQ8064"
				214	select ARCH_MSM_KRAITMP
Steve Muckle	f132c6c	2012-06-06 18:30:57 -0700	[diff] [blame]	215	select GPIO_MSM_V2
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	216	select ARM_GIC
				217	select CPU_V7
				218	select MSM_SCM if SMP
Joel King	4ebccc6	2011-07-22 09:43:22 -0700	[diff] [blame]	219	select MSM_GPIOMUX
Eric Holmberg	40d2188	2011-09-27 09:42:03 -0600	[diff] [blame]	220	select MSM_REMOTE_SPINLOCK_SFPB
Swaminathan Sathappan	47e5d93	2011-12-05 14:48:07 -0800	[diff] [blame]	221	select MSM_PIL
Swaminathan Sathappan	2f51a75	2011-12-05 12:51:19 -0800	[diff] [blame]	222	select MSM_QDSP6_APR
Harmandeep Singh	c35fa07d	2012-05-31 07:08:59 -0700	[diff] [blame]	223	select MSM_QDSP6_CODECS
Swaminathan Sathappan	2f51a75	2011-12-05 12:51:19 -0800	[diff] [blame]	224	select MSM_AUDIO_QDSP6 if SND_SOC
Marc Zyngier	89bdafd1	2011-12-22 11:39:20 +0530	[diff] [blame]	225	select MULTI_IRQ_HANDLER
Praveen Chidambaram	7849901	2011-11-01 17:15:17 -0600	[diff] [blame]	226	select MSM_RPM
				227	select MSM_SPM_V2
				228	select MSM_L2_SPM
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	229	select MSM_PM8X60 if PM
Neil Leeder	814d3d3	2012-01-19 17:21:43 -0500	[diff] [blame]	230	select CPU_HAS_L2_PMU
Laura Abbott	085dd20	2012-03-30 14:02:34 -0700	[diff] [blame]	231	select HOLES_IN_ZONE if SPARSEMEM
Larry Bassel	67b921d	2012-04-06 10:23:27 -0700	[diff] [blame]	232	select CLEANCACHE
				233	select QCACHE
Niranjana Vishwanathapura	f1427ac	2012-05-03 14:28:21 -0600	[diff] [blame]	234	select MIGHT_HAVE_PCI
				235	select ARCH_SUPPORTS_MSI
Laura Abbott	b14ed96	2012-01-30 14:18:08 -0800	[diff] [blame]	236	select ARM_HAS_SG_CHAIN
Stepan Moskovchenko	196f86e	2012-07-13 20:40:46 -0700	[diff] [blame]	237	select MSM_KRAIT_WFE_FIXUP
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	238
Abhimanyu Kapur	90ced6e	2012-06-26 17:41:25 -0700	[diff] [blame]	239	config ARCH_MSM8974
				240	bool "MSM8974"
Sathish Ambley	d4efc76	2011-10-09 22:19:22 -0700	[diff] [blame]	241	select ARCH_MSM_KRAITMP
Sathish Ambley	4149e84	2012-03-23 11:53:55 -0700	[diff] [blame]	242	select GPIO_MSM_V3
Sathish Ambley	d4efc76	2011-10-09 22:19:22 -0700	[diff] [blame]	243	select ARM_GIC
				244	select CPU_V7
				245	select MSM_SCM if SMP
				246	select MSM_GPIOMUX
Marc Zyngier	89bdafd1	2011-12-22 11:39:20 +0530	[diff] [blame]	247	select MULTI_IRQ_HANDLER
Olav Haugan	b800c8c	2012-01-30 08:50:45 -0800	[diff] [blame]	248	select MSM_MULTIMEDIA_USE_ION
Matt Wagantall	c2bbdc3	2012-03-21 19:44:50 -0700	[diff] [blame]	249	select MSM_PIL
Praveen Chidambaram	aa9d52b	2012-04-02 11:09:47 -0600	[diff] [blame]	250	select MSM_SPM_V2
				251	select MSM_L2_SPM
Praveen Chidambaram	85b7b28	2012-04-16 13:45:15 -0600	[diff] [blame]	252	select MSM_PM8X60 if PM
Steve Muckle	f132c6c	2012-06-06 18:30:57 -0700	[diff] [blame]	253	select MAY_HAVE_SPARSE_IRQ
				254	select SPARSE_IRQ
Mahesh Sivasubramanian	cb66871	2012-04-04 13:03:25 -0600	[diff] [blame]	255	select MSM_RPM_SMD
David Collins	c764232	2012-04-04 10:19:12 -0700	[diff] [blame]	256	select REGULATOR
Joonwoo Park	91d9546	2012-08-02 10:55:54 -0700	[diff] [blame^]	257	select MSM_QDSP6_APRV2
Harmandeep Singh	e5ddfe3	2012-05-26 09:39:25 -0700	[diff] [blame]	258	select MSM_QDSP6V2_CODECS
				259	select MSM_AUDIO_QDSP6V2 if SND_SOC
David Collins	1c91ea7	2012-05-03 16:17:35 -0700	[diff] [blame]	260	select MSM_RPM_REGULATOR_SMD
Laura Abbott	b14ed96	2012-01-30 14:18:08 -0800	[diff] [blame]	261	select ARM_HAS_SG_CHAIN
Karthik Parsha	404fb8f	2012-07-30 19:14:05 -0700	[diff] [blame]	262	select MSM_RUN_QUEUE_STATS
Sathish Ambley	d4efc76	2011-10-09 22:19:22 -0700	[diff] [blame]	263
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	264	config ARCH_FSM9XXX
				265	bool "FSM9XXX"
				266	select ARCH_MSM_SCORPION
				267	select MSM_VIC
				268	select CPU_V7
				269	select MSM_REMOTE_SPINLOCK_LDREX
Steve Muckle	f132c6c	2012-06-06 18:30:57 -0700	[diff] [blame]	270	select GPIO_FSM9XXX
Marc Zyngier	89bdafd1	2011-12-22 11:39:20 +0530	[diff] [blame]	271	select MULTI_IRQ_HANDLER
Bryan Huntsman	18b3c0c	2011-11-23 15:12:58 -0800	[diff] [blame]	272	select MSM_DALRPC
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	273
Rohit Vaswani	ddeb52a	2011-08-16 12:26:32 -0700	[diff] [blame]	274	config ARCH_MSM9615
				275	bool "MSM9615"
				276	select ARM_GIC
Taniya Das	b241bd8	2012-03-19 17:58:06 +0530	[diff] [blame]	277	select GIC_SECURE
Rohit Vaswani	ddeb52a	2011-08-16 12:26:32 -0700	[diff] [blame]	278	select ARCH_MSM_CORTEX_A5
				279	select CPU_V7
Steve Muckle	f132c6c	2012-06-06 18:30:57 -0700	[diff] [blame]	280	select GPIO_MSM_V2
Rohit Vaswani	ddeb52a	2011-08-16 12:26:32 -0700	[diff] [blame]	281	select MSM_GPIOMUX
Praveen Chidambaram	ab3b1c4	2011-08-25 08:44:05 -0600	[diff] [blame]	282	select MSM_RPM
Maheshkumar Sivasubramanian	738b458	2011-09-06 17:26:24 -0600	[diff] [blame]	283	select MSM_SPM_V2
Rohit Vaswani	f688fa6	2011-10-13 18:13:10 -0700	[diff] [blame]	284	select MSM_NATIVE_RESTART
Matt Wagantall	9274df9	2011-12-15 11:11:05 -0800	[diff] [blame]	285	select REGULATOR
				286	select MSM_RPM_REGULATOR
Marc Zyngier	89bdafd1	2011-12-22 11:39:20 +0530	[diff] [blame]	287	select MULTI_IRQ_HANDLER
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	288	select MSM_PM8X60 if PM
Vikram Mulukutla	2021c00	2011-12-16 12:32:59 -0800	[diff] [blame]	289	select MSM_XO
Olav Haugan	e6a0acd	2012-04-05 09:29:12 -0700	[diff] [blame]	290	select MSM_MULTIMEDIA_USE_ION
Shiv Maliyappanahalli	9ec55e9	2012-01-09 14:44:59 -0800	[diff] [blame]	291	select MSM_QDSP6_APR
				292	select MSM_AUDIO_QDSP6 if SND_SOC
Rohit Vaswani	ead426f	2012-01-05 20:24:52 -0800	[diff] [blame]	293	select FIQ
Laura Abbott	b14ed96	2012-01-30 14:18:08 -0800	[diff] [blame]	294	select ARM_HAS_SG_CHAIN
Matt Wagantall	9274df9	2011-12-15 11:11:05 -0800	[diff] [blame]	295
Taniya Das	43bcdd6	2011-12-02 17:33:27 +0530	[diff] [blame]	296	config ARCH_MSM8625
				297	bool "MSM8625"
				298	select ARCH_MSM_CORTEX_A5
				299	select CPU_V7
Steve Muckle	f132c6c	2012-06-06 18:30:57 -0700	[diff] [blame]	300	select GPIO_MSM_V1
Taniya Das	43bcdd6	2011-12-02 17:33:27 +0530	[diff] [blame]	301	select MSM_GPIOMUX
				302	select ARM_GIC
				303	select ARCH_MSM_CORTEXMP
				304	select MULTI_IRQ_HANDLER
Trilok Soni	3a45399	2012-03-06 18:46:22 +0530	[diff] [blame]	305	select ARM_TICKET_LOCKS
Krishna Vanka	e292205	2012-03-02 09:59:12 +0530	[diff] [blame]	306	select MSM_RUN_QUEUE_STATS
Trilok Soni	b856ab9	2012-06-26 14:33:28 +0530	[diff] [blame]	307	select MIGHT_HAVE_CACHE_L2X0
Rohit Vaswani	fafe249	2012-04-23 18:54:12 -0700	[diff] [blame]	308
				309	config ARCH_MSM9625
				310	bool "MSM9625"
				311	select ARM_GIC
				312	select GIC_SECURE
Abhimanyu Kapur	490d20c	2012-06-22 17:34:20 -0700	[diff] [blame]	313	select MIGHT_HAVE_CACHE_L2X0
Rohit Vaswani	fafe249	2012-04-23 18:54:12 -0700	[diff] [blame]	314	select ARCH_MSM_CORTEX_A5
				315	select SMP
				316	select MSM_SMP
				317	select CPU_V7
Jin Hong	690e335	2012-05-02 09:25:05 -0700	[diff] [blame]	318	select MSM_GPIOMUX
Rohit Vaswani	fafe249	2012-04-23 18:54:12 -0700	[diff] [blame]	319	select MULTI_IRQ_HANDLER
Rohit Vaswani	61cf6ef	2012-07-27 13:51:48 -0700	[diff] [blame]	320	select GPIO_MSM_V3
Rohit Vaswani	fafe249	2012-04-23 18:54:12 -0700	[diff] [blame]	321
Stepan Moskovchenko	1cd286f	2011-08-03 19:03:02 -0700	[diff] [blame]	322	endmenu
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	323
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	324	choice
				325	prompt "MSM SoC Revision"
				326	default MSM_SOC_REV_NONE
				327	config MSM_SOC_REV_NONE
				328	bool "N/A"
				329	select EMULATE_DOMAIN_MANAGER_V7 if ARCH_QSD8X50
				330	select VERIFY_PERMISSION_FAULT if ARCH_QSD8X50
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	331	config MSM_SOC_REV_A
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	332	bool "Rev. A"
				333	select ARCH_MSM7X27A if ARCH_MSM7X27
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	334	endchoice
				335
Stepan Moskovchenko	00da074	2011-07-08 14:06:44 -0700	[diff] [blame]	336	config MSM_KRAIT_TBB_ABORT_HANDLER
				337	bool "Krait TBB/TBH data abort handler"
				338	depends on ARCH_MSM_KRAIT
				339	depends on ARM_THUMB
				340	help
				341	Certain early samples of the Krait processor may generate data
				342	aborts for TBB / TBH instructions that fail their condition code
				343	checks. Enabling this option will ignore these erroneous data aborts,
				344	at the expense of a very small performance penalty.
Stephen Boyd	a3d3ef9	2011-11-08 10:33:04 -0800	[diff] [blame]	345
Stepan Moskovchenko	00da074	2011-07-08 14:06:44 -0700	[diff] [blame]	346	If unsure, say N.
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	347
				348	config ARCH_MSM_ARM11
				349	bool
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	350
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	351	config ARCH_MSM_SCORPION
				352	bool
				353
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	354	config ARCH_MSM_KRAIT
Daniel Walker	46fe5f2	2010-08-18 11:00:25 -0700	[diff] [blame]	355	bool
Stephen Boyd	51cabbe	2011-12-02 13:28:56 -0800	[diff] [blame]	356	select ARM_L1_CACHE_SHIFT_6
Daniel Walker	46fe5f2	2010-08-18 11:00:25 -0700	[diff] [blame]	357
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	358	config MSM_SMP
Steve Muckle	f132c6c	2012-06-06 18:30:57 -0700	[diff] [blame]	359	select HAVE_SMP
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	360	bool
				361
				362	config ARCH_MSM_SCORPIONMP
				363	select ARCH_MSM_SCORPION
				364	select MSM_SMP
Taniya Das	c43e687	2012-03-21 16:41:14 +0530	[diff] [blame]	365	select HAVE_ARCH_HAS_CURRENT_TIMER
Pratik Patel	2963de4	2012-05-17 12:43:40 -0700	[diff] [blame]	366	select MSM_JTAG if MSM_QDSS
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	367	bool
				368
				369	config ARCH_MSM_KRAITMP
				370	select ARCH_MSM_KRAIT
				371	select MSM_SMP
Taniya Das	c43e687	2012-03-21 16:41:14 +0530	[diff] [blame]	372	select HAVE_ARCH_HAS_CURRENT_TIMER
Pratik Patel	2963de4	2012-05-17 12:43:40 -0700	[diff] [blame]	373	select MSM_JTAG if MSM_QDSS
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	374	bool
Steve Muckle	f132c6c	2012-06-06 18:30:57 -0700	[diff] [blame]	375	select HAVE_HW_BRKPT_RESERVED_RW_ACCESS
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	376
Taniya Das	43bcdd6	2011-12-02 17:33:27 +0530	[diff] [blame]	377	config ARCH_MSM_CORTEXMP
				378	select MSM_SMP
				379	bool
				380
Stepan Moskovchenko	196f86e	2012-07-13 20:40:46 -0700	[diff] [blame]	381	config MSM_KRAIT_WFE_FIXUP
				382	bool
				383
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	384	config ARCH_MSM_CORTEX_A5
Bryan Huntsman	239ef1e	2011-11-23 15:09:13 -0800	[diff] [blame]	385	bool
Rohit Vaswani	af7ae27	2012-01-09 10:28:57 -0800	[diff] [blame]	386	select HAVE_HW_BRKPT_RESERVED_RW_ACCESS
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	387
				388	config ARCH_MSM7X27A
				389	bool
				390	select MSM_DALRPC
Justin Paupore	b3a33b7	2011-08-23 15:30:32 -0700	[diff] [blame]	391	select MSM_PROC_COMM_REGULATOR
Taniya Das	86e0e13	2011-10-19 11:32:00 +0530	[diff] [blame]	392	select MULTI_IRQ_HANDLER
Taniya Das	43bcdd6	2011-12-02 17:33:27 +0530	[diff] [blame]	393	select ARM_GIC
				394	select ARCH_MSM_CORTEXMP
Trilok Soni	b856ab9	2012-06-26 14:33:28 +0530	[diff] [blame]	395	select MIGHT_HAVE_CACHE_L2X0
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	396
Gregory Bean	f9f3d31	2010-04-30 22:06:50 -0700	[diff] [blame]	397	config MSM_VIC
				398	bool
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	399
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	400	config MSM_RPM
				401	bool "Resource Power Manager"
				402	select MSM_MPM
				403
Mahesh Sivasubramanian	a8ff992	2012-03-27 17:50:42 -0600	[diff] [blame]	404	config MSM_RPM_SMD
				405	depends on MSM_SMD
Mahesh Sivasubramanian	102e596	2012-06-20 13:12:11 -0600	[diff] [blame]	406	select MSM_MPM_OF
				407	bool "RPM driver using SMD protocol"
				408	help
				409	RPM is the dedicated hardware engine for managing shared SoC
				410	resources. This config adds driver support for using SMD as a
				411	transport layer communication with RPM hardware. It also selects
				412	the MSM_MPM config that programs the MPM module to monitor interrupts
				413	during sleep modes.
Mahesh Sivasubramanian	a8ff992	2012-03-27 17:50:42 -0600	[diff] [blame]	414
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	415	config MSM_MPM
				416	bool "Modem Power Manager"
Mahesh Sivasubramanian	102e596	2012-06-20 13:12:11 -0600	[diff] [blame]	417	help
				418	MPM is a dedicated hardware resource responsible for entering and
				419	waking up from a system wide low power mode. The MPM driver tracks
				420	the wakeup interrupts and configures the MPM to monitor the wakeup
				421	interrupts when going to a system wide sleep mode.
				422
				423	config MSM_MPM_OF
				424	bool "Modem Power Manager"
				425	depends on CONFIG_OF
				426	help
				427	MPM is a dedicated hardware resource responsible for entering and
				428	waking up from a system wide low power mode. The MPM driver tracks
				429	the wakeup interrupts and configures the MPM to monitor the wakeup
				430	interrupts when going to a system wide sleep mode. This config option
				431	enables the MPM driver that supports initialization from a device
				432	tree
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	433
				434	config MSM_XO
				435	bool
				436
				437	config MSM_REMOTE_SPINLOCK_DEKKERS
				438	bool
				439	config MSM_REMOTE_SPINLOCK_SWP
				440	bool
				441	config MSM_REMOTE_SPINLOCK_LDREX
				442	bool
Eric Holmberg	eab1073	2011-09-23 19:44:43 -0600	[diff] [blame]	443	config MSM_REMOTE_SPINLOCK_SFPB
				444	bool
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	445	config MSM_ADM3
				446	bool
				447
				448	menu "MSM Board Selection"
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	449
				450	config MACH_HALIBUT
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	451	depends on ARCH_MSM7X01A
				452	depends on MSM_STACKED_MEMORY
				453	default y
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	454	bool "Halibut Board (QCT SURF7201A)"
				455	help
				456	Support for the Qualcomm SURF7201A eval board.
				457
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	458	config MACH_MSM7201A_SURF
				459	depends on ARCH_MSM7X01A
				460	depends on MSM_STACKED_MEMORY
				461	default y
				462	bool "MSM7201A SURF"
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	463	help
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	464	Support for the Qualcomm MSM7201A SURF eval board.
				465
				466	config MACH_MSM7201A_FFA
				467	depends on ARCH_MSM7X01A
				468	depends on MSM_STACKED_MEMORY
				469	default y
				470	bool "MSM7201A FFA"
				471	help
				472	Support for the Qualcomm MSM7201A FFA eval board.
				473
				474	config MACH_TROUT
				475	depends on ARCH_MSM7X01A
				476	depends on MSM_STACKED_MEMORY
				477	default y
				478	bool "Trout"
				479
				480	config MACH_MSM7X27_SURF
				481	depends on ARCH_MSM7X27
				482	depends on !MSM_STACKED_MEMORY
				483	default y
				484	bool "MSM7x27 SURF"
				485	help
				486	Support for the Qualcomm MSM7x27 SURF eval board.
				487
				488	config MACH_MSM7X27_FFA
				489	depends on ARCH_MSM7X27
				490	depends on !MSM_STACKED_MEMORY
				491	default y
				492	bool "MSM7x27 FFA"
				493	help
				494	Support for the Qualcomm MSM7x27 FFA eval board.
				495
				496	config MACH_MSM7X27A_RUMI3
				497	depends on ARCH_MSM7X27A
				498	depends on !MSM_STACKED_MEMORY
				499	default y
				500	bool "MSM7x27A RUMI3"
				501	help
				502	Support for the Qualcomm MSM7x27A RUMI3 Emulation Platform.
				503
				504	config MACH_MSM7X27A_SURF
				505	depends on ARCH_MSM7X27A
				506	depends on !MSM_STACKED_MEMORY
				507	default y
				508	bool "MSM7x27A SURF"
				509	help
				510	Support for the Qualcomm MSM7x27A SURF.
				511
				512	config MACH_MSM7X27A_FFA
				513	depends on ARCH_MSM7X27A
				514	depends on !MSM_STACKED_MEMORY
				515	default y
				516	bool "MSM7x27A FFA"
				517	help
				518	Support for the Qualcomm MSM7x27A FFA.
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	519
Trilok Soni	3d0f6c5	2011-07-26 16:06:58 +0530	[diff] [blame]	520	config MACH_MSM7625A_SURF
				521	depends on ARCH_MSM7X27A
				522	depends on !MSM_STACKED_MEMORY
				523	default y
				524	bool "MSM7625A SURF"
				525	help
				526	Support for the Qualcomm MSM7625A SURF.
				527
				528	config MACH_MSM7625A_FFA
				529	depends on ARCH_MSM7X27A
				530	depends on !MSM_STACKED_MEMORY
				531	default y
				532	bool "MSM7625A FFA"
				533	help
				534	Support for the Qualcomm MSM7625A FFA.
				535
Taniya Das	c98bfbc	2011-08-23 09:58:55 +0530	[diff] [blame]	536	config MACH_MSM7627A_QRD1
				537	depends on ARCH_MSM7X27A
				538	depends on !MSM_STACKED_MEMORY
				539	default y
				540	bool "MSM7627A QRD1"
				541	help
Chintan Pandya	b1bad0e	2012-02-06 19:04:51 +0530	[diff] [blame]	542	Support for the Qualcomm MSM7627A Reference Design.
				543
				544	config MACH_MSM7627A_QRD3
				545	depends on ARCH_MSM7X27A
				546	depends on !MSM_STACKED_MEMORY
				547	default y
				548	bool "MSM7627A QRD3"
				549	help
				550	Support for the Qualcomm MSM7627A Reference Design.
Taniya Das	c98bfbc	2011-08-23 09:58:55 +0530	[diff] [blame]	551
Taniya Das	c868a2e	2012-01-03 10:18:47 +0530	[diff] [blame]	552	config MACH_MSM7627A_EVB
				553	depends on ARCH_MSM7X27A
				554	depends on !MSM_STACKED_MEMORY
				555	default y
				556	bool "MSM7627A EVB"
				557	help
				558	Support for the Qualcomm MSM7627A Reference Design.
				559
Taniya Das	43bcdd6	2011-12-02 17:33:27 +0530	[diff] [blame]	560	config MACH_MSM8625_RUMI3
				561	depends on ARCH_MSM8625
				562	depends on !MSM_STACKED_MEMORY
				563	default y
				564	bool "MSM8625 RUMI3"
				565	help
				566	Support for the Qualcomm MSM8625 RUMI3 Emulation Platform.
				567
Taniya Das	e3027e2	2012-02-27 16:32:27 +0530	[diff] [blame]	568	config MACH_MSM8625_SURF
				569	depends on ARCH_MSM8625
				570	depends on !MSM_STACKED_MEMORY
				571	default y
				572	bool "MSM8625 SURF"
				573	help
				574	Support for the Qualcomm MSM8625 SURF.
				575
Aparna Mallavarapu	9f000a7	2012-04-20 15:37:57 +0530	[diff] [blame]	576	config MACH_MSM8625_FFA
				577	depends on ARCH_MSM8625
				578	depends on !MSM_STACKED_MEMORY
				579	default y
				580	bool "MSM8625 FFA"
				581	help
				582	Support for the Qualcomm MSM8625 FFA.
				583
Chintan Pandya	f4ad400	2012-02-28 19:49:03 +0530	[diff] [blame]	584	config MACH_MSM8625_EVB
				585	depends on ARCH_MSM8625
				586	depends on !MSM_STACKED_MEMORY
				587	default y
				588	bool "MSM8625 EVB"
				589	help
				590	Support for the Qualcomm MSM8625 Reference Design.
				591
Taniya Das	bd09654	2012-03-15 17:43:45 +0530	[diff] [blame]	592	config MACH_MSM8625_QRD7
				593	depends on ARCH_MSM8625
				594	depends on !MSM_STACKED_MEMORY
				595	default y
				596	bool "MSM8625 QRD7"
				597	help
				598	Support for the Qualcomm MSM8625 Reference Design.
				599
Aparna Mallavarapu	5a32624	2012-05-09 19:49:02 +0530	[diff] [blame]	600	config MACH_MSM8625_EVT
				601	depends on ARCH_MSM8625
				602	depends on !MSM_STACKED_MEMORY
				603	default y
				604	bool "MSM8625 EVT"
				605	help
				606	Support for the Qualcomm MSM8625 Reference Design.
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	607
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	608	config MACH_MSM7X30_SURF
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	609	depends on ARCH_MSM7X30
				610	depends on !MSM_STACKED_MEMORY
				611	default y
				612	bool "MSM7x30 SURF"
				613	help
				614	Support for the Qualcomm MSM7x30 SURF eval board.
				615
				616	config MACH_MSM7X30_FFA
				617	depends on ARCH_MSM7X30
				618	depends on !MSM_STACKED_MEMORY
				619	default y
				620	bool "MSM7x30 FFA"
				621	help
				622	Support for the Qualcomm MSM7x30 FFA eval board.
				623
				624	config MACH_MSM7X30_FLUID
				625	depends on ARCH_MSM7X30
				626	depends on !MSM_STACKED_MEMORY
				627	default y
				628	bool "MSM7x30 FLUID"
				629	help
				630	Support for the Qualcomm MSM7x30 FLUID eval board.
				631
				632	config MACH_SAPPHIRE
				633	depends on ARCH_MSM7X01A
				634	default n
				635	bool "Sapphire"
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	636
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	637	config MACH_QSD8X50_SURF
				638	depends on ARCH_QSD8X50
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	639	depends on MSM_SOC_REV_NONE
				640	depends on MSM_STACKED_MEMORY
				641	default y
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	642	bool "QSD8x50 SURF"
				643	help
				644	Support for the Qualcomm QSD8x50 SURF eval board.
				645
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	646	config MACH_QSD8X50_FFA
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	647	depends on ARCH_QSD8X50
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	648	depends on MSM_SOC_REV_NONE
				649	depends on MSM_STACKED_MEMORY
				650	default y
				651	bool "QSD8x50 FFA"
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	652	help
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	653	Support for the Qualcomm QSD8x50 FFA eval board.
				654
				655	config MACH_MSM7X25_SURF
				656	depends on ARCH_MSM7X25
				657	depends on !MSM_STACKED_MEMORY
				658	default y
				659	bool "MSM7x25 SURF"
				660	help
				661	Support for the Qualcomm MSM7x25 SURF eval board.
				662
				663	config MACH_MSM7X25_FFA
				664	depends on ARCH_MSM7X25
				665	depends on !MSM_STACKED_MEMORY
				666	default y
				667	bool "MSM7x25 FFA"
				668	help
				669	Support for the Qualcomm MSM7x25 FFA eval board.
				670
				671	config MACH_MSM8X55_SURF
				672	depends on ARCH_MSM7X30
				673	depends on !MSM_STACKED_MEMORY
				674	default y
				675	bool "MSM8X55 SURF"
				676	help
				677	Support for the Qualcomm MSM8x55 SURF eval board.
				678
				679	config MACH_MSM8X55_FFA
				680	depends on ARCH_MSM7X30
				681	depends on !MSM_STACKED_MEMORY
				682	default y
				683	bool "MSM8X55 FFA"
				684	help
				685	Support for the Qualcomm MSM8x55 FFA eval board.
				686
				687	config MACH_MSM8X55_SVLTE_FFA
				688	depends on ARCH_MSM7X30
				689	depends on !MSM_STACKED_MEMORY
				690	default y
				691	bool "MSM8X55 SVLTE FFA"
				692	help
				693	Support for the Qualcomm MSM8x55 SVLTE FFA eval board.
				694
				695	config MACH_MSM8X55_SVLTE_SURF
				696	depends on ARCH_MSM7X30
				697	depends on !MSM_STACKED_MEMORY
				698	default y
				699	bool "MSM8X55 SVLTE SURF"
				700	help
				701	Support for the Qualcomm MSM8x55 SVLTE SURF eval board.
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	702
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	703	config MACH_MSM8X60_SURF
				704	depends on ARCH_MSM8X60
				705	default n
				706	bool "MSM8x60 SURF"
				707	help
				708	Support for the Qualcomm MSM8x60 SURF eval board.
				709
Gregory Bean	69b7f6f	2010-04-04 22:29:02 -0700	[diff] [blame]	710	config MACH_MSM8X60_FFA
				711	depends on ARCH_MSM8X60
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	712	default n
Gregory Bean	69b7f6f	2010-04-04 22:29:02 -0700	[diff] [blame]	713	bool "MSM8x60 FFA"
				714	help
				715	Support for the Qualcomm MSM8x60 FFA eval board.
				716
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	717	config MACH_MSM8X60_FLUID
				718	depends on ARCH_MSM8X60
				719	default n
				720	bool "MSM8x60 FLUID"
				721	help
				722	Support for the Qualcomm MSM8x60 FLUID platform. The FLUID is an
				723	8x60 target which has a form factor that is much closer to that
				724	of a phone than other targets. It also has a new display and
				725	touchscreen controller.
				726
				727	config MACH_MSM8X60_FUSION
				728	depends on ARCH_MSM8X60
				729	default n
				730	bool "MSM8x60 FUSION"
				731	help
				732	Support for the Qualcomm MSM8x60 Fusion SURF device.
				733
				734	config MACH_MSM8X60_FUSN_FFA
				735	depends on ARCH_MSM8X60
				736	default n
				737	bool "MSM8x60 FUSN FFA"
				738	help
				739	Support for the Qualcomm MSM8x60 Fusion FFA device.
				740
Zhang Chang Ken	ef05b17	2011-07-27 15:28:13 -0400	[diff] [blame]	741	config MACH_MSM8X60_DRAGON
				742	depends on ARCH_MSM8X60
				743	default n
				744	bool "MSM8x60 DRAGON"
				745	help
				746	Support for the Qualcomm MSM8x60 Dragon board.
				747
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	748	config MACH_MSM8960_CDP
				749	depends on ARCH_MSM8960
				750	bool "MSM8960 CDP"
				751	help
				752	Support for the Qualcomm MSM8960 CDP device.
				753
				754	config MACH_MSM8960_MTP
				755	depends on ARCH_MSM8960
				756	bool "MSM8960 MTP"
				757	help
				758	Support for the Qualcomm MSM8960 MTP device.
				759
				760	config MACH_MSM8960_FLUID
				761	depends on ARCH_MSM8960
				762	bool "MSM8960 FLUID"
				763	help
				764	Support for the Qualcomm MSM8960 FLUID device.
				765
Amir Samuelov	0d1f8ae	2011-07-28 11:13:58 +0300	[diff] [blame]	766	config MACH_MSM8960_LIQUID
				767	depends on ARCH_MSM8960
				768	bool "MSM8960 LIQUID"
				769	help
				770	Support for the Qualcomm MSM8960 LIQUID device.
				771
Stepan Moskovchenko	082952d	2011-10-18 17:27:08 -0700	[diff] [blame]	772	config MACH_MSM8930_CDP
				773	depends on ARCH_MSM8930
				774	bool "MSM8930 CDP"
				775	help
				776	Support for the Qualcomm MSM8930 CDP device.
				777
				778	config MACH_MSM8930_MTP
				779	depends on ARCH_MSM8930
				780	bool "MSM8930 MTP"
				781	help
				782	Support for the Qualcomm MSM8930 MTP device.
				783
				784	config MACH_MSM8930_FLUID
				785	depends on ARCH_MSM8930
				786	bool "MSM8930 FLUID"
				787	help
				788	Support for the Qualcomm MSM8930 FLUID device.
				789
Stepan Moskovchenko	8768eff	2011-12-01 18:55:07 -0800	[diff] [blame]	790	config MACH_MSM8627_CDP
				791	depends on ARCH_MSM8930
				792	bool "MSM8627 CDP"
				793	help
				794	Support for the Qualcomm MSM8627 CDP device.
				795
				796	config MACH_MSM8627_MTP
				797	depends on ARCH_MSM8930
				798	bool "MSM8627 MTP"
				799	help
				800	Support for the Qualcomm MSM8627 MTP device.
				801
Rohit Vaswani	a8e7a83	2011-09-28 21:00:05 -0700	[diff] [blame]	802	config MACH_MSM9615_CDP
				803	depends on ARCH_MSM9615
				804	bool "MSM9615 CDP"
				805	help
				806	Support for the Qualcomm MSM9615 CDP device.
				807
				808	config MACH_MSM9615_MTP
				809	depends on ARCH_MSM9615
				810	bool "MSM9615 MTP"
				811	help
				812	Support for the Qualcomm MSM9615 MTP device.
				813
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	814	config MSM_USE_TSIF1
				815	depends on ARCH_MSM8X60
				816	bool "MSM8x60 use TSIF1"
				817	help
				818	Selects TSIF1 core to be used rather than TSIF0.
				819	The two TSIF cores share the same DM configuration
				820	so they cannot be used simultaneously.
				821
Joel King	82b7e3f	2012-01-05 10:03:27 -0800	[diff] [blame]	822	config MACH_APQ8064_CDP
				823	depends on ARCH_APQ8064
				824	bool "APQ8064 CDP"
				825	help
				826	Support for the Qualcomm APQ8064 CDP device.
				827
				828	config MACH_APQ8064_MTP
				829	depends on ARCH_APQ8064
				830	bool "APQ8064 MTP"
				831	help
				832	Support for the Qualcomm APQ8064 MTP device.
				833
				834	config MACH_APQ8064_LIQUID
				835	depends on ARCH_APQ8064
				836	bool "APQ8064 LIQUID"
				837	help
				838	Support for the Qualcomm APQ8064 LIQUID device.
				839
Joel King	064bbf8	2012-04-01 13:23:39 -0700	[diff] [blame]	840	config MACH_MPQ8064_CDP
				841	depends on ARCH_APQ8064
				842	bool "MPQ8064 CDP"
				843	help
				844	Support for the Qualcomm MPQ8064 CDP device.
				845
Joel King	11ca820	2012-02-13 16:19:03 -0800	[diff] [blame]	846	config MACH_MPQ8064_HRD
				847	depends on ARCH_APQ8064
				848	bool "MPQ8064 HRD"
				849	help
				850	Support for the Qualcomm MPQ8064 HRD device.
				851
				852	config MACH_MPQ8064_DTV
				853	depends on ARCH_APQ8064
				854	bool "MPQ8064 DTV"
				855	help
				856	Support for the Qualcomm MPQ8064 DTV device.
				857
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	858	config MACH_FSM9XXX_SURF
				859	depends on ARCH_FSM9XXX
				860	depends on !MSM_STACKED_MEMORY
				861	default y
				862	bool "FSM9XXX SURF"
				863	help
				864	Support for the Qualcomm FSM9xxx femtocell
				865	chipset based SURF evaluation board and
				866	FFA board.
				867
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	868	endmenu
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	869
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	870	config MSM_STACKED_MEMORY
				871	bool "Stacked Memory"
				872	default y
Stepan Moskovchenko	24f6173	2011-02-11 12:28:16 -0800	[diff] [blame]	873	help
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	874	This option is used to indicate the presence of on-die stacked
				875	memory. When present this memory bank is used for a high speed
				876	shared memory interface. When not present regular RAM is used.
Stepan Moskovchenko	24f6173	2011-02-11 12:28:16 -0800	[diff] [blame]	877
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	878	config PHYS_OFFSET
				879	hex
Rohit Vaswani	ddeb52a	2011-08-16 12:26:32 -0700	[diff] [blame]	880	default "0x40800000" if ARCH_MSM9615
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	881	default "0x80200000" if ARCH_APQ8064
				882	default "0x80200000" if ARCH_MSM8960
Stepan Moskovchenko	082952d	2011-10-18 17:27:08 -0700	[diff] [blame]	883	default "0x80200000" if ARCH_MSM8930
Abhimanyu Kapur	90ced6e	2012-06-26 17:41:25 -0700	[diff] [blame]	884	default "0x00000000" if ARCH_MSM8974
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	885	default "0x10000000" if ARCH_FSM9XXX
Rohit Vaswani	fafe249	2012-04-23 18:54:12 -0700	[diff] [blame]	886	default "0x20200000" if ARCH_MSM9625
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	887	default "0x00200000" if !MSM_STACKED_MEMORY
				888	default "0x00000000" if ARCH_QSD8X50 && MSM_SOC_REV_A
				889	default "0x20000000" if ARCH_QSD8X50
				890	default "0x40200000" if ARCH_MSM8X60
				891	default "0x10000000"
Stepan Moskovchenko	24f6173	2011-02-11 12:28:16 -0800	[diff] [blame]	892
Mitchel Humpherys	05e5881	2012-08-13 14:24:13 -0700	[diff] [blame]	893	config KERNEL_MSM_CONTIG_MEM_REGION
				894	bool "Enable in-kernel contiguous memory region"
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	895	default y if ARCH_MSM8X60
Abhimanyu Kapur	90ced6e	2012-06-26 17:41:25 -0700	[diff] [blame]	896	depends on ANDROID_PMEM && (ARCH_MSM8X60 \|\| ARCH_MSM8960 \|\| ARCH_MSM8974)
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	897	help
Mitchel Humpherys	05e5881	2012-08-13 14:24:13 -0700	[diff] [blame]	898	Enable the in-kernel contiguous memory allocator. Sets up a
				899	region of physically contiguous memory. This memory is
				900	reserved during initialization, and can be used
				901	generically.
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	902
				903	config KERNEL_PMEM_SMI_REGION
				904	bool "Enable in-kernel PMEM region for SMI"
				905	default y if ARCH_MSM8X60
				906	depends on ANDROID_PMEM && ((ARCH_QSD8X50 && !PMEM_GPU0) \|\| (ARCH_MSM8X60 && !VCM))
				907	help
				908	Enable the in-kernel PMEM allocator to use SMI memory.
				909
				910	config PMEM_GPU0
				911	bool "Enable PMEM GPU0 region"
				912	default y
				913	depends on ARCH_QSD8X50 && ANDROID_PMEM
				914	help
				915	Enable the PMEM GPU0 device on SMI Memory.
				916
				917	config MSM_AMSS_VERSION
				918	int
				919	default 6210 if MSM_AMSS_VERSION_6210
				920	default 6220 if MSM_AMSS_VERSION_6220
				921	default 6225 if MSM_AMSS_VERSION_6225
				922
				923	choice
				924	prompt "AMSS modem firmware version"
				925
				926	default MSM_AMSS_VERSION_6225
				927
				928	config MSM_AMSS_VERSION_6210
				929	bool "6.2.10"
				930
				931	config MSM_AMSS_VERSION_6220
				932	bool "6.2.20"
				933
				934	config MSM_AMSS_VERSION_6225
				935	bool "6.2.20 + New ADSP"
				936	endchoice
Stepan Moskovchenko	2607b0a	2010-11-15 17:46:10 -0800	[diff] [blame]	937
Sathish Ambley	f5bebd6	2011-11-03 23:36:36 -0700	[diff] [blame]	938	config MSM_HAS_DEBUG_UART_HS
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	939	bool
Sathish Ambley	f5bebd6	2011-11-03 23:36:36 -0700	[diff] [blame]	940	help
				941	Say Y here if high speed MSM UART is present.
				942
				943	config MSM_HAS_DEBUG_UART_HS_V14
				944	bool
				945	select MSM_HAS_DEBUG_UART_HS
				946	help
				947	Say Y here if high speed MSM UART v1.4 is present.
				948
Taniya Das	fa4ee7f	2012-02-21 15:04:51 +0530	[diff] [blame]	949	config MSM_DEBUG_UART_PHYS
				950	hex
				951	default 0xA9A00000 if (ARCH_MSM7X27 \|\| ARCH_QSD8X50) && DEBUG_MSM_UART1
				952	default 0xACA00000 if ARCH_MSM7X30 && DEBUG_MSM_UART1
				953	default 0x94000000 if ARCH_FSM9XXX && DEBUG_MSM_UART1
				954	default 0xA9B00000 if (ARCH_MSM7X27 \|\| ARCH_QSD8X50) && DEBUG_MSM_UART2
				955	default 0xACB00000 if ARCH_MSM7X30 && DEBUG_MSM_UART2
				956	default 0x94100000 if ARCH_FSM9XXX && DEBUG_MSM_UART2
				957	default 0xA9C00000 if (ARCH_MSM7X27 \|\| ARCH_QSD8X50) && DEBUG_MSM_UART3
				958	default 0xACC00000 if ARCH_MSM7X30 && DEBUG_MSM_UART3
				959
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	960	choice
				961	prompt "Debug UART"
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	962	depends on DEBUG_LL
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	963
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	964	config DEBUG_MSM_UART1
				965	bool "Kernel low-level debugging messages via MSM UART1"
Taniya Das	fa4ee7f	2012-02-21 15:04:51 +0530	[diff] [blame]	966	depends on ARCH_MSM7X27 \|\| ARCH_MSM7X30 \|\| ARCH_QSD8X50 \|\| ARCH_FSM9XXX
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	967	help
				968	Say Y here if you want the debug print routines to direct
				969	their output to the first serial port on MSM devices.
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	970
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	971	config DEBUG_MSM_UART2
				972	bool "Kernel low-level debugging messages via MSM UART2"
Taniya Das	fa4ee7f	2012-02-21 15:04:51 +0530	[diff] [blame]	973	depends on ARCH_MSM7X27 \|\| ARCH_MSM7X30 \|\| ARCH_QSD8X50 \|\| ARCH_FSM9XXX
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	974	help
				975	Say Y here if you want the debug print routines to direct
				976	their output to the second serial port on MSM devices.
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	977
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	978	config DEBUG_MSM_UART3
				979	bool "Kernel low-level debugging messages via MSM UART3"
Taniya Das	fa4ee7f	2012-02-21 15:04:51 +0530	[diff] [blame]	980	depends on ARCH_MSM7X27 \|\| ARCH_MSM7X30 \|\| ARCH_QSD8X50
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	981	help
				982	Say Y here if you want the debug print routines to direct
				983	their output to the third serial port on MSM devices.
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	984
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	985	config DEBUG_MSM8660_UART
				986	bool "Kernel low-level debugging messages via MSM 8660 UART"
				987	depends on ARCH_MSM8X60
Sathish Ambley	f5bebd6	2011-11-03 23:36:36 -0700	[diff] [blame]	988	select MSM_HAS_DEBUG_UART_HS
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	989	help
				990	Say Y here if you want the debug print routines to direct
				991	their output to the serial port on MSM 8660 devices.
Steve Muckle	c8aabae	2010-04-21 16:20:27 -0700	[diff] [blame]	992
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	993	config DEBUG_MSM8960_UART
				994	bool "Kernel low-level debugging messages via MSM 8960 UART"
Stepan Moskovchenko	824db17	2012-05-29 18:05:09 -0700	[diff] [blame]	995	depends on ARCH_MSM8960 && DEBUG_LL
Sathish Ambley	f5bebd6	2011-11-03 23:36:36 -0700	[diff] [blame]	996	select MSM_HAS_DEBUG_UART_HS
Sathish Ambley	bb87d5f	2011-11-08 15:14:01 -0800	[diff] [blame]	997	help
				998	Say Y here if you want the debug print routines to direct
				999	their output to the serial port on MSM 8960 devices.
Sathish Ambley	f5bebd6	2011-11-03 23:36:36 -0700	[diff] [blame]	1000
Stepan Moskovchenko	824db17	2012-05-29 18:05:09 -0700	[diff] [blame]	1001	config DEBUG_MSM8930_UART
				1002	bool "Kernel low-level debugging messages via MSM 8930 UART"
				1003	depends on ARCH_MSM8930 && DEBUG_LL
				1004	select MSM_HAS_DEBUG_UART_HS
				1005	help
				1006	Say Y here if you want the debug print routines to direct
				1007	their output to the serial port on MSM 8930 devices.
				1008
				1009	config DEBUG_APQ8064_UART
				1010	bool "Kernel low-level debugging messages via APQ 8064 UART"
				1011	depends on ARCH_APQ8064 && DEBUG_LL
				1012	select MSM_HAS_DEBUG_UART_HS
				1013	help
				1014	Say Y here if you want the debug print routines to direct
				1015	their output to the serial port on APQ 8064 devices.
				1016
Abhimanyu Kapur	90ced6e	2012-06-26 17:41:25 -0700	[diff] [blame]	1017	config DEBUG_MSM8974_UART
				1018	bool "Kernel low-level debugging messages via MSM 8974 UART"
				1019	depends on ARCH_MSM8974
Sathish Ambley	f5bebd6	2011-11-03 23:36:36 -0700	[diff] [blame]	1020	select MSM_HAS_DEBUG_UART_HS_V14
				1021	help
				1022	Say Y here if you want the debug print routines to direct
Abhimanyu Kapur	90ced6e	2012-06-26 17:41:25 -0700	[diff] [blame]	1023	their output to the serial port on MSM 8974 devices.
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	1024	endchoice
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	1025
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1026	choice
				1027	prompt "Default Timer"
				1028	default MSM7X00A_USE_GP_TIMER
				1029
				1030	config MSM7X00A_USE_GP_TIMER
				1031	bool "GP Timer"
				1032	help
				1033	Low resolution timer that allows power collapse from idle.
				1034
				1035	config MSM7X00A_USE_DG_TIMER
				1036	bool "DG Timer"
				1037	help
				1038	High resolution timer.
				1039	endchoice
				1040
				1041	choice
				1042	prompt "Suspend sleep mode"
				1043	default MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				1044	help
				1045	Allows overriding the sleep mode used. Leave at power
				1046	collapse suspend unless the arm9 image has problems.
				1047
				1048	config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				1049	bool "Power collapse suspend"
				1050	help
				1051	Lowest sleep state. Returns through reset vector.
				1052
				1053	config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
				1054	bool "Power collapse"
				1055	help
				1056	Sleep state that returns through reset vector.
				1057
				1058	config MSM7X00A_SLEEP_MODE_APPS_SLEEP
				1059	bool "Apps Sleep"
				1060
				1061	config MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
				1062	bool "Ramp down cpu clock and wait for interrupt"
				1063
				1064	config MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
				1065	bool "Wait for interrupt"
				1066	endchoice
				1067
				1068	config MSM7X00A_SLEEP_MODE
				1069	int
				1070	default 0 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				1071	default 1 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
				1072	default 2 if MSM7X00A_SLEEP_MODE_APPS_SLEEP
				1073	default 3 if MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
				1074	default 4 if MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
				1075
				1076	choice
				1077	prompt "Idle sleep mode"
				1078	default MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
				1079	help
				1080	Allows overriding the sleep mode used from idle. Leave at power
				1081	collapse suspend unless the arm9 image has problems.
				1082
				1083	config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				1084	bool "Power collapse suspend"
				1085	help
				1086	Lowest sleep state. Returns through reset vector.
				1087
				1088	config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
				1089	bool "Power collapse"
				1090	help
				1091	Sleep state that returns through reset vector.
				1092
				1093	config MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
				1094	bool "Apps Sleep"
				1095
				1096	config MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
				1097	bool "Ramp down cpu clock and wait for interrupt"
				1098
				1099	config MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
				1100	bool "Wait for interrupt"
				1101	endchoice
				1102
				1103	config MSM7X00A_IDLE_SLEEP_MODE
				1104	int
				1105	default 0 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				1106	default 1 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
				1107	default 2 if MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
				1108	default 3 if MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
				1109	default 4 if MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
				1110
				1111	config MSM7X00A_IDLE_SLEEP_MIN_TIME
				1112	int "Minimum idle time before sleep"
				1113	default 20000000
				1114	help
				1115	Minimum idle time in nanoseconds before entering low power mode.
				1116
				1117	config MSM7X00A_IDLE_SPIN_TIME
				1118	int "Idle spin time before cpu ramp down"
				1119	default 80000
				1120	help
				1121	Spin time in nanoseconds before ramping down cpu clock and entering
				1122	any low power state.
				1123
				1124	menuconfig MSM_IDLE_STATS
				1125	bool "Collect idle statistics"
				1126	default y
				1127	help
				1128	Collect idle statistics and export them in proc/msm_pm_stats.
				1129
				1130	if MSM_IDLE_STATS
				1131
				1132	config MSM_IDLE_STATS_FIRST_BUCKET
				1133	int "First bucket time"
				1134	default 62500
				1135	help
				1136	Upper time limit in nanoseconds of first bucket.
				1137
				1138	config MSM_IDLE_STATS_BUCKET_SHIFT
				1139	int "Bucket shift"
				1140	default 2
				1141
				1142	config MSM_IDLE_STATS_BUCKET_COUNT
				1143	int "Bucket count"
				1144	default 10
				1145
				1146	config MSM_SUSPEND_STATS_FIRST_BUCKET
				1147	int "First bucket time for suspend"
				1148	default 1000000000
				1149	help
				1150	Upper time limit in nanoseconds of first bucket of the
				1151	histogram. This is for collecting statistics on suspend.
				1152
				1153	endif # MSM_IDLE_STATS
				1154
				1155	config CPU_HAS_L2_PMU
				1156	bool "L2CC PMU Support"
				1157	help
				1158	Select this if the L2 cache controller has a Performance Monitoring Unit.
				1159
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1160	config HTC_HEADSET
				1161	tristate "HTC 2 Wire detection driver"
				1162	default n
				1163	help
				1164	Provides support for detecting HTC 2 wire devices, such as wired
				1165	headset, on the trout platform. Can be used with the msm serial
				1166	debugger, but not with serial console.
				1167
				1168	config TROUT_BATTCHG
				1169	depends on MACH_TROUT && POWER_SUPPLY
				1170	default y
				1171	bool "Trout battery / charger driver"
				1172
				1173	config HTC_PWRSINK
				1174	depends on MSM_SMD
				1175	default n
				1176	bool "HTC Power Sink Driver"
				1177
				1178	config QSD_SVS
				1179	bool "QSD Static Voltage Scaling"
				1180	depends on (MACH_QSD8X50_SURF \|\| MACH_QSD8X50_FFA)
				1181	default y
				1182	select TPS65023
				1183	help
				1184	Enables static voltage scaling using the TPS65023 PMIC.
				1185
				1186	config QSD_PMIC_DEFAULT_DCDC1
				1187	int "PMIC default output voltage"
				1188	depends on (MACH_QSD8X50_SURF \|\| MACH_QSD8X50_FFA)
				1189	default 1250
				1190	help
				1191	This is the PMIC voltage at Linux kernel boot.
				1192
				1193	config MSM_FIQ_SUPPORT
				1194	default y
				1195	bool "Enable installation of an FIQ handler."
				1196
				1197	config MSM_SERIAL_DEBUGGER
				1198	select MSM_FIQ_SUPPORT
				1199	select KERNEL_DEBUGGER_CORE
				1200	default n
				1201	bool "FIQ Mode Serial Debugger"
				1202	help
				1203	The FIQ serial debugger can accept commands even when the
				1204	kernel is unresponsive due to being stuck with interrupts
				1205	disabled. Depends on the kernel debugger core in drivers/misc.
				1206
				1207	config MSM_SERIAL_DEBUGGER_CONSOLE
				1208	depends on MSM_SERIAL_DEBUGGER
				1209	default n
				1210	bool "Console on FIQ Serial Debugger port"
				1211	help
				1212	Enables a console so that printk messages are displayed on
				1213	the debugger serial port as the occur.
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	1214
Gregory Bean	ab78cde	2010-09-01 16:26:12 -0700	[diff] [blame]	1215	config MSM_PROC_COMM
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1216	default y
				1217	bool "Proc-Comm RPC Interface"
				1218	help
				1219	Enables a lightweight communications interface to the
				1220	baseband processor.
Gregory Bean	ab78cde	2010-09-01 16:26:12 -0700	[diff] [blame]	1221
Gregory Bean	1963a2a	2010-08-28 10:05:44 -0700	[diff] [blame]	1222	config MSM_SMD
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1223	bool "MSM Shared Memory Driver (SMD)"
				1224	help
				1225	Support for the shared memory interface between the apps
				1226	processor and the baseband processor. Provides access to
				1227	the "shared heap", as well as virtual serial channels
				1228	used to communicate with various services on the baseband
				1229	processor.
				1230
				1231	choice
				1232	prompt "MSM Shared memory interface version"
				1233	depends on MSM_SMD
				1234	default MSM_SMD_PKG3 if ARCH_MSM_ARM11
				1235	default MSM_SMD_PKG4 if ARCH_MSM_SCORPION
				1236
				1237	config MSM_SMD_PKG3
				1238	bool
				1239	prompt "Package 3"
				1240
				1241	config MSM_SMD_PKG4
				1242	bool
				1243	prompt "Package 4"
				1244	endchoice
				1245
Niranjana Vishwanathapura	f1427ac	2012-05-03 14:28:21 -0600	[diff] [blame]	1246	config MSM_PCIE
				1247	bool "MSM PCIe Controller driver"
				1248	depends on PCI && PCI_MSI
				1249	help
				1250	Enables the PCIe functionality by configures PCIe core on
				1251	MSM chipset and by enabling the ARM PCI framework extension.
				1252
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1253	config MSM_RPC_SDIO_XPRT
				1254	depends on MSM_SDIO_AL
				1255	default y
				1256	bool "MSM SDIO XPRT Layer"
				1257	help
				1258	SDIO Transport Layer for RPC Rouer
				1259
				1260	config MSM_RPC_SDIO_DEBUG
				1261	depends on MSM_RPC_SDIO_XPRT
				1262	default y
				1263	bool "MSM SDIO XPRT debug support"
				1264	help
				1265	Support for debugging SDIO XPRT
				1266
				1267	config MSM_SMD_DEBUG
				1268	depends on MSM_SMD
				1269	default y
				1270	bool "MSM SMD debug support"
				1271	help
				1272	Support for debugging the SMD for communication
				1273	between the ARM9 and ARM11
				1274
				1275	config MSM_SDIO_AL
				1276	depends on ((ARCH_MSM7X30 \|\| MACH_MSM8X60_FUSN_FFA \|\| MACH_TYPE_MSM8X60_FUSION) && HAS_WAKELOCK)
				1277	default y
				1278	tristate "SDIO-Abstraction-Layer"
				1279	help
				1280	Support MSM<->MDM Communication over SDIO bus.
				1281	MDM SDIO-Client should have pipes support.
				1282
				1283	config MSM_SDIO_DMUX
				1284	bool "SDIO Data Mux Driver"
				1285	depends on MSM_SDIO_AL
				1286	default n
				1287	help
				1288	Support Muxed Data Channels over SDIO interface.
				1289
				1290	config MSM_BAM_DMUX
				1291	bool "BAM Data Mux Driver"
				1292	depends on SPS
				1293	default n
				1294	help
				1295	Support Muxed Data Channels over BAM interface.
				1296	BAM has a limited number of pipes. This driver
				1297	provides a means to support more logical channels
				1298	via muxing than BAM could without muxing.
				1299
				1300	config MSM_N_WAY_SMD
Jeff Hugo	0c0f5e9	2011-09-28 13:55:45 -0600	[diff] [blame]	1301	depends on (MSM_SMD && !(ARCH_MSM7X01A))
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1302	default y
				1303	bool "MSM N-WAY SMD support"
				1304	help
				1305	Supports APPS-QDSP SMD communication along with
				1306	normal APPS-MODEM SMD communication.
				1307
				1308	config MSM_N_WAY_SMSM
Jeff Hugo	0c0f5e9	2011-09-28 13:55:45 -0600	[diff] [blame]	1309	depends on (MSM_SMD && !(ARCH_MSM7X01A))
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1310	default y
				1311	bool "MSM N-WAY SMSM support"
				1312	help
				1313	Supports APPS-QDSP SMSM communication along with
				1314	normal APPS-MODEM SMSM communication.
				1315
				1316	config MSM_RESET_MODEM
				1317	tristate "Reset Modem Driver"
				1318	depends on MSM_SMD
				1319	default m
				1320	help
				1321	Allows the user to reset the modem through a device node.
				1322
				1323	config MSM_SMD_LOGGING
				1324	depends on MSM_SMD
				1325	default y
				1326	bool "MSM Shared Memory Logger"
				1327	help
				1328	This option exposes the shared memory logger at /dev/smem_log
				1329	and a debugfs node named smem_log.
				1330
				1331	If in doubt, say yes.
				1332
Karthikeyan Ramasubramanian	e1f4f73	2011-08-08 13:34:47 -0600	[diff] [blame]	1333	config MSM_IPC_LOGGING
				1334	bool "MSM Debug Logging for IPC Drivers"
				1335	help
				1336	This option allows the debug logging for IPC Drivers.
				1337
				1338	If in doubt, say no.
				1339
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1340	config MSM_SMD_NMEA
				1341	bool "NMEA GPS Driver"
				1342	depends on MSM_SMD
				1343	default y
				1344	help
				1345	Enable this to support the NMEA GPS device.
				1346
				1347	If in doubt, say yes.
				1348
				1349	config MSM_SDIO_TTY
				1350	bool "SDIO TTY Driver"
				1351	depends on MSM_SDIO_AL
				1352	default n
				1353	help
				1354	Provides a TTY driver SDIO TTY
				1355	This driver can be used by user space
				1356	applications for passing data through the
				1357	SDIO interface.
				1358
				1359	config MSM_SMD_TTY
				1360	bool "SMD TTY Driver"
				1361	depends on MSM_SMD
				1362	default y
				1363	help
				1364	Provides TTY interfaces to interact with the modem.
				1365
				1366	If in doubt, say yes.
				1367
				1368	config MSM_SMD_QMI
				1369	bool "SMD QMI Driver"
				1370	depends on MSM_SMD
				1371	default y
				1372	help
				1373	Manages network data connections.
				1374
				1375	If in doubt, say yes.
				1376
				1377	config MSM_SMD_PKT
				1378	bool "SMD Packet Driver"
				1379	depends on MSM_SMD
				1380	default y
				1381	help
				1382	Provides a binary SMD non-muxed packet port interface.
				1383
				1384	If in doubt, say yes.
				1385
				1386	config MSM_SDIO_CMUX
				1387	bool "SDIO CMUX Driver"
				1388	depends on MSM_SDIO_AL
				1389	default n
				1390	help
				1391	Provides a Muxed port interface over SDIO QMI
				1392
				1393	config MSM_DSPS
				1394	bool "Sensors DSPS driver"
				1395	depends on (MSM_PIL && (ARCH_MSM8X60 \|\| ARCH_MSM8960))
				1396	default n
				1397	help
				1398	Provides user-space interface to the sensors manager
				1399	to turn on/off the Sensors Processor system clocks.
				1400	It is the DSPS responsibility to turn on/off the sensors
				1401	themself.
				1402	The number of clocks and their name may vary between targets.
				1403	It also triggers the PIL to load the DSPS firmware.
				1404
				1405	config MSM_SDIO_CTL
				1406	bool "SDIO CTL Driver"
				1407	depends on MSM_SDIO_CMUX
				1408	default n
				1409	help
				1410	Provides a binary SDIO control port interface.
				1411
				1412	config MSM_ONCRPCROUTER
				1413	depends on MSM_SMD
				1414	default n
				1415	bool "MSM ONCRPC router support"
				1416	help
				1417	Support for the MSM ONCRPC router for communication between
				1418	the ARM9 and ARM11
				1419
				1420	config MSM_IPC_ROUTER
Karthikeyan Ramasubramanian	da45b43	2011-09-23 14:39:30 -0600	[diff] [blame]	1421	depends on NET
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1422	default n
				1423	bool "MSM IPC Router support"
				1424	help
				1425	Support for the MSM IPC Router for communication between
				1426	the APPs and the MODEM
				1427
Karthikeyan Ramasubramanian	da45b43	2011-09-23 14:39:30 -0600	[diff] [blame]	1428	config MSM_IPC_ROUTER_SMD_XPRT
				1429	depends on MSM_SMD
				1430	depends on MSM_IPC_ROUTER
				1431	default n
				1432	bool "MSM SMD XPRT Layer"
				1433	help
				1434	SMD Transport Layer for IPC Router
				1435
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1436	config MSM_ONCRPCROUTER_DEBUG
				1437	depends on MSM_ONCRPCROUTER
				1438	default y
				1439	bool "MSM debug ONCRPC router support"
				1440	help
				1441	Support for debugging the ONCRPC router for communication
				1442	between the ARM9 and ARM11
				1443
				1444	config MSM_RPC_LOOPBACK_XPRT
				1445	depends on MSM_ONCRPCROUTER
				1446	default n
				1447	bool "MSM RPC local routing support"
				1448	help
				1449	Support for routing RPC messages between APPS clients
				1450	and APPS servers. Helps in testing APPS RPC framework.
				1451
				1452	config MSM_RPCSERVER_TIME_REMOTE
				1453	depends on MSM_ONCRPCROUTER && RTC_HCTOSYS
				1454	default y
				1455	bool "Time remote RPC server"
				1456	help
				1457	The time remote server receives notification of time bases and
				1458	reports these events to registered callback functions.
				1459
				1460	config MSM_RPCSERVER_WATCHDOG
				1461	depends on MSM_ONCRPCROUTER
				1462	default y
				1463	bool "Watchdog RPC server"
				1464	help
				1465	The dog_keepalive server handles watchdog events.
				1466
				1467	config MSM_RPC_WATCHDOG
				1468	depends on MSM_ONCRPCROUTER
				1469	default n
				1470	bool "Watchdog RPC client"
				1471	help
				1472	The dog_keepalive client module.
				1473
				1474	config MSM_RPC_PING
				1475	depends on MSM_ONCRPCROUTER && DEBUG_FS
				1476	default m
				1477	bool "MSM rpc ping"
				1478	help
				1479	Implements MSM rpc ping test module.
				1480
				1481	config MSM_RPC_PROC_COMM_TEST
				1482	depends on DEBUG_FS && MSM_PROC_COMM
				1483	default m
				1484	bool "MSM rpc proc comm test"
				1485	help
				1486	Implements MSM rpc proc comm test module.
				1487
				1488	config MSM_RPC_OEM_RAPI
				1489	depends on MSM_ONCRPCROUTER
				1490	default m
				1491	bool "MSM oem rapi"
				1492	help
				1493	Implements MSM oem rapi client module.
				1494
				1495	config MSM_RPCSERVER_HANDSET
				1496	depends on MSM_ONCRPCROUTER
				1497	default y
				1498	bool "Handset events RPC server"
				1499	help
				1500	Support for receiving handset events like headset detect,
				1501	headset switch and clamshell state.
				1502
				1503	config MSM_RMT_STORAGE_CLIENT
				1504	depends on (ARCH_MSM && MSM_ONCRPCROUTER)
				1505	default n
				1506	bool "Remote Storage RPC client"
				1507	help
				1508	Provide RPC mechanism for remote processors to access storage
				1509	device on apps processor.
				1510
				1511	config MSM_RMT_STORAGE_CLIENT_STATS
				1512	depends on (MSM_RMT_STORAGE_CLIENT && DEBUG_FS)
				1513	default n
				1514	bool "Remote storage RPC client performance statistics"
				1515	help
				1516	Collects performance statistics and shows this information
				1517	through a debugfs file rmt_storage_stats.
				1518
				1519	config MSM_SDIO_SMEM
				1520	depends on MSM_SDIO_AL
				1521	default n
				1522	bool "SDIO SMEM for remote storage"
				1523	help
				1524	Copies data from remote MDM9K memory to local MSM8x60
				1525	memory. Used by remote storage client to shadow
				1526	MDM9K filesystem.
				1527
				1528	config MSM_DALRPC
				1529	bool "DAL RPC support"
Bryan Huntsman	18b3c0c	2011-11-23 15:12:58 -0800	[diff] [blame]	1530	default n
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1531	help
				1532	Supports RPC calls to DAL devices on remote processor cores.
				1533
				1534	config MSM_DALRPC_TEST
				1535	tristate "DAL RPC test module"
				1536	depends on (MSM_DALRPC && DEBUG_FS)
				1537	default m
				1538	help
				1539	Exercises DAL RPC calls to QDSP6.
				1540
				1541	if CPU_FREQ_MSM
				1542
				1543	config MSM_CPU_FREQ_SET_MIN_MAX
				1544	bool "Set Min/Max CPU frequencies."
				1545	default n
				1546	help
				1547	Allow setting min and max CPU frequencies. Sysfs can be used
				1548	to override these values.
				1549
				1550	config MSM_CPU_FREQ_MAX
				1551	int "Max CPU Frequency"
				1552	depends on MSM_CPU_FREQ_SET_MIN_MAX
				1553	default 384000
				1554
				1555	config MSM_CPU_FREQ_MIN
				1556	int "Min CPU Frequency"
				1557	depends on MSM_CPU_FREQ_SET_MIN_MAX
				1558	default 245760
				1559
				1560	endif # CPU_FREQ_MSM
				1561
				1562	config MSM_CPU_AVS
				1563	bool "Enable software controlled Adaptive Voltage Scaling (AVS)"
				1564	depends on (ARCH_MSM_SCORPION && QSD_SVS)
				1565	depends on ARCH_QSD8X50
				1566	default n
				1567	select MSM_AVS_HW
				1568	help
				1569	This enables the s/w control of Adaptive Voltage Scaling feature
				1570	in Qualcomm ARMv7 CPUs. It adjusts the voltage for each frequency
				1571	based on feedback from three ring oscillators in the CPU.
				1572
				1573	config MSM_AVS_HW
				1574	bool "Enable Adaptive Voltage Scaling (AVS)"
				1575	default n
				1576	help
				1577	Enable AVS hardware to fine tune voltage at each frequency. The
				1578	AVS hardware blocks associated with each Qualcomm ARMv7 cores can
				1579	fine tune the voltages based on the feedback from the ring
				1580	oscillators.
				1581
				1582	config MSM_HW3D
				1583	tristate "MSM Hardware 3D Register Driver"
				1584	depends on ANDROID_PMEM
				1585	default y
				1586	help
				1587	Provides access to registers needed by the userspace OpenGL\|ES
				1588	library.
				1589
				1590	config MSM_ADSP
				1591	depends on (ARCH_MSM7X01A \|\| ARCH_MSM7X25 \|\| ARCH_MSM7X27)
				1592	tristate "MSM ADSP driver"
				1593	depends on ANDROID_PMEM
				1594	default y
				1595	help
				1596	Provides access to registers needed by the userspace aDSP library.
				1597
				1598	config ADSP_RPC_VER
				1599	hex
				1600	default 0x30002 if (ARCH_MSM7X27 \|\| (ARCH_MSM7X25 && AMSS_7X25_VERSION_2009))
				1601	default 0x30001 if (ARCH_MSM7X01A \|\| (ARCH_MSM7X25 && AMSS_7X25_VERSION_2008))
				1602	depends on MSM_ADSP
				1603	help
				1604	Select proper ADSP RPC version
				1605	choice
				1606	prompt "ADSP RPC version"
				1607
				1608	default AMSS_7X25_VERSION_2009
				1609
				1610	config AMSS_7X25_VERSION_2009
				1611	bool "2.0.09"
				1612
				1613	config AMSS_7X25_VERSION_2008
				1614	bool "2.0.08"
				1615	endchoice
				1616
				1617	config MSM7KV2_AUDIO
				1618	bool "MSM7K v2 audio"
				1619	depends on (ARCH_MSM7X30 && ANDROID_PMEM)
				1620	default y
				1621	help
				1622	Enables QDSP5V2-based audio drivers for audio playbacks and
				1623	voice call.
				1624
				1625	config MSM_ADSP_REPORT_EVENTS
				1626	bool "Report modem events from the DSP"
				1627	default y
				1628	depends on (MSM_ADSP \|\| MSM7KV2_AUDIO)
				1629	help
				1630	Normally, only messages from the aDSP are reported to userspace.
				1631	With this option, we report events from the aDSP as well.
				1632
				1633	config MSM_QDSP6
				1634	tristate "QDSP6 support"
				1635	depends on ARCH_QSD8X50 && ANDROID_PMEM
				1636	default y
				1637	help
				1638	Enable support for qdsp6. This provides audio and video functionality.
				1639
				1640	config MSM8X60_AUDIO
				1641	tristate "MSM8X60 audio support"
				1642	depends on ARCH_MSM8X60 && ANDROID_PMEM
				1643	default y
				1644	help
				1645	Enable support for qdsp6v2. This provides audio functionality.
				1646
				1647	config MSM8X60_FTM_AUDIO_DEVICES
				1648	bool "MSM8X60 audio factory test mode support"
				1649	depends on MSM8X60_AUDIO
				1650	help
				1651	Enable support audio factory test mode devices. This is used
				1652	in a production line environment.
				1653
Ben Romberger	45b351c	2011-07-20 22:37:27 -0700	[diff] [blame]	1654	config RTAC
				1655	bool "MSM8K real-time audio calibration support"
				1656	default y
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1657	help
Ben Romberger	45b351c	2011-07-20 22:37:27 -0700	[diff] [blame]	1658	Enable support for rtac. This enables calibration during
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1659	audio operation
				1660
				1661	config MSM7X27A_AUDIO
				1662	bool "MSM7X27A audio support"
				1663	depends on ARCH_MSM7X27A && MSM_ADSP
				1664	default n
				1665	help
				1666	Enable support for 7x27a. This provides audio functionality.
				1667
Justin Paupore	a6cd209	2011-06-22 16:19:45 -0700	[diff] [blame]	1668	config MSM_PROC_COMM_REGULATOR
Gregory Bean	1963a2a	2010-08-28 10:05:44 -0700	[diff] [blame]	1669	bool
Justin Paupore	a6cd209	2011-06-22 16:19:45 -0700	[diff] [blame]	1670	depends on MSM_PROC_COMM && REGULATOR
				1671	help
				1672	Enable regulator framework support for regulators managed by PMLIB
				1673	on the modem, and controlled through proccomm calls.
				1674
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1675	config MSM_VREG_SWITCH_INVERTED
				1676	bool "Reverse vreg switch polarity"
				1677	default n
				1678	help
				1679	Reverses the enable and disable for vreg switch.
				1680
				1681	config MSM_DMA_TEST
				1682	tristate "MSM DMA test module"
				1683	default m
				1684	help
				1685	Intended to be compiled as a module. Provides a device node
				1686	and ioctls for testing the MSM dma system.
				1687
				1688	config WIFI_CONTROL_FUNC
				1689	bool "Enable WiFi control function abstraction"
				1690	help
				1691	Enables Power/Reset/Carddetect function abstraction
				1692
				1693	config WIFI_MEM_PREALLOC
				1694	depends on WIFI_CONTROL_FUNC
				1695	bool "Preallocate memory for WiFi buffers"
				1696	help
				1697	Preallocates memory buffers for WiFi driver
				1698
				1699	config QSD_AUDIO
				1700	bool "QSD audio"
				1701	depends on ARCH_MSM_SCORPION && MSM_DALRPC && ANDROID_PMEM && !MSM_SMP
				1702	default y
				1703	help
				1704	Provides PCM, MP3, and AAC audio playback.
				1705
				1706	config AUDIO_AAC_PLUS
				1707	depends on (MSM_ADSP \|\| QSD_AUDIO \|\| MSM7KV2_AUDIO)
				1708	bool "AAC+ Audio"
				1709	default y
				1710	help
				1711	Provides AAC+ decoding
				1712
				1713	config AUDIO_ENHANCED_AAC_PLUS
				1714	depends on AUDIO_AAC_PLUS
				1715	bool "Enhanced AAC+ Audio"
				1716	default y
				1717	help
				1718	Provides Enhanced AAC+ decoding
				1719
				1720	config SURF_FFA_GPIO_KEYPAD
				1721	bool "MSM SURF/FFA GPIO keypad"
				1722	depends on INPUT_GPIO = "y"
				1723	default y
				1724	help
				1725	Select if the GPIO keypad is attached.
				1726
				1727	config MSM_SLEEP_TIME_OVERRIDE
				1728	bool "Allow overriding suspend/sleep time with PM module parameter"
				1729	default y
				1730	help
				1731	Enable the module parameter sleep_time_override. Specified
				1732	in units of seconds, it overwrites the normal sleep time of
				1733	suspend. The feature is required for automated power management
				1734	testing.
				1735
				1736	config MSM_MEMORY_LOW_POWER_MODE
				1737	bool "Control the low power modes of memory"
				1738	default n
				1739	help
				1740	The application processor controls whether memory should enter
				1741	which low power mode.
				1742
				1743	choice
				1744	prompt "Default Memory Low Power Mode during Idle"
				1745	depends on MSM_MEMORY_LOW_POWER_MODE
				1746	default MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
				1747	help
				1748	Selects the default low power mode of the memory during idle
				1749	sleep.
				1750
				1751	config MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
				1752	bool "Memory active"
				1753
				1754	config MSM_MEMORY_LOW_POWER_MODE_IDLE_RETENTION
				1755	bool "Memory in retention"
				1756
				1757	config MSM_MEMORY_LOW_POWER_MODE_IDLE_DEEP_POWER_DOWN
				1758	bool "Memory in deep power down"
				1759	endchoice
				1760
				1761	choice
				1762	prompt "Default Memory Low Power Mode during Suspend"
				1763	depends on MSM_MEMORY_LOW_POWER_MODE
				1764	default MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
				1765	help
				1766	Selects the default low power mode of the memory during suspend
				1767	sleep.
				1768
				1769	config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
				1770	bool "Memory active"
				1771
				1772	config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_RETENTION
				1773	bool "Memory in retention"
				1774
				1775	config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_DEEP_POWER_DOWN
				1776	bool "Memory in deep power down"
				1777	endchoice
				1778
				1779	choice
				1780	prompt "Power management timeout action"
				1781	default MSM_PM_TIMEOUT_HALT
				1782	help
				1783	Selects the Application Processor's action when Power Management
				1784	times out waiting for Modem's handshake.
				1785
				1786	config MSM_PM_TIMEOUT_HALT
				1787	bool "Halt the Application Processor"
				1788
				1789	config MSM_PM_TIMEOUT_RESET_MODEM
				1790	bool "Reset the Modem Processor"
				1791
				1792	config MSM_PM_TIMEOUT_RESET_CHIP
				1793	bool "Reset the entire chip"
				1794	endchoice
				1795
				1796	config MSM_IDLE_WAIT_ON_MODEM
				1797	int "Wait for Modem to become ready for idle power collapse"
				1798	default 0
				1799	help
				1800	If Modem is not ready to handle Application Processor's request
				1801	for idle power collapse, wait the number of microseconds in case
				1802	Modem becomes ready soon.
				1803
Matt Wagantall	9274df9	2011-12-15 11:11:05 -0800	[diff] [blame]	1804	config MSM_RPM_REGULATOR
				1805	bool "RPM regulator driver"
Matt Wagantall	32dc71e	2012-01-04 11:13:11 -0800	[diff] [blame]	1806	depends on MSM_RPM && REGULATOR
Matt Wagantall	9274df9	2011-12-15 11:11:05 -0800	[diff] [blame]	1807	help
				1808	Compile in support for the RPM regulator driver, used for setting
				1809	voltages and other parameters of the various power rails supplied
				1810	by some Qualcomm PMICs.
				1811
David Collins	c764232	2012-04-04 10:19:12 -0700	[diff] [blame]	1812	config MSM_RPM_REGULATOR_SMD
				1813	bool "SMD RPM regulator driver"
				1814	depends on REGULATOR
				1815	depends on OF
				1816	depends on MSM_RPM_SMD
				1817	help
				1818	Compile in support for the SMD RPM regulator driver which is used for
				1819	setting voltages and other parameters of the various power rails
				1820	supplied by some Qualcomm PMICs. The SMD RPM regulator driver should
				1821	be used on systems which contain an RPM which communicates with the
				1822	application processor over SMD.
				1823
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1824	config MSM_PIL
				1825	bool "Peripheral image loading"
				1826	select FW_LOADER
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1827	default n
				1828	help
				1829	Some peripherals need to be loaded into memory before they can be
				1830	brought out of reset.
				1831
				1832	Say yes to support these devices.
				1833
Stephen Boyd	4eb885b	2011-09-29 01:16:03 -0700	[diff] [blame]	1834	config MSM_PIL_MODEM
				1835	tristate "Modem (ARM11) Boot Support"
				1836	depends on MSM_PIL
				1837	help
				1838	Support for booting and shutting down ARM11 Modem processors.
				1839
Stephen Boyd	3acc9e4	2011-09-28 16:46:40 -0700	[diff] [blame]	1840	config MSM_PIL_QDSP6V3
				1841	tristate "QDSP6v3 (Hexagon) Boot Support"
				1842	depends on MSM_PIL
				1843	help
				1844	Support for booting and shutting down QDSP6v3 processors (hexagon).
				1845	The QDSP6 is a low power DSP used in audio software applications.
				1846
Stephen Boyd	eb81988	2011-08-29 14:46:30 -0700	[diff] [blame]	1847	config MSM_PIL_QDSP6V4
				1848	tristate "QDSP6v4 (Hexagon) Boot Support"
				1849	depends on MSM_PIL
				1850	help
				1851	Support for booting and shutting down QDSP6v4 processors (hexagon).
				1852	The QDSP6 is a low power DSP used in audio, modem firmware, and modem
				1853	software applications.
				1854
Matt Wagantall	c2bbdc3	2012-03-21 19:44:50 -0700	[diff] [blame]	1855	config MSM_PIL_LPASS_QDSP6V5
				1856	tristate "LPASS QDSP6v5 (Hexagon) Boot Support"
				1857	depends on MSM_PIL
				1858	help
Matt Wagantall	4e2599e	2012-03-21 22:31:35 -0700	[diff] [blame]	1859	Support for booting and shutting down QDSP6v5 (Hexagon) processors
				1860	in low power audio subsystems.
				1861
				1862	config MSM_PIL_MSS_QDSP6V5
				1863	tristate "MSS QDSP6v5 (Hexagon) Boot Support"
				1864	depends on MSM_PIL
				1865	help
				1866	Support for booting and shutting down QDSP6v5 (Hexagon) processors
				1867	in modem subsystems.
Matt Wagantall	c2bbdc3	2012-03-21 19:44:50 -0700	[diff] [blame]	1868
Matt Wagantall	e6e00d5	2012-03-08 17:39:07 -0800	[diff] [blame]	1869	config MSM_PIL_MBA
				1870	tristate "Support for modem self-authentication"
				1871	depends on MSM_PIL_MSS_QDSP6V5
				1872	help
				1873	Support for booting self-authenticating modems using the Modem Boot
				1874	Authenticator.
Stephen Boyd	322a992	2011-09-20 01:05:54 -0700	[diff] [blame]	1875
				1876	config MSM_PIL_RIVA
Stephen Boyd	d89eebe	2011-09-28 23:28:11 -0700	[diff] [blame]	1877	tristate "RIVA (WCNSS) Boot Support"
				1878	depends on MSM_PIL
				1879	help
				1880	Support for booting and shutting down the RIVA processor (WCNSS).
				1881	Riva is the wireless subsystem processor used in bluetooth, wireless
				1882	LAN, and FM software applications.
				1883
				1884	config MSM_PIL_TZAPPS
				1885	tristate "TZApps Boot Support"
				1886	depends on MSM_PIL
Stephen Boyd	25c4a0b	2011-09-20 00:12:36 -0700	[diff] [blame]	1887	help
				1888	Support for booting and shutting down TZApps.
				1889
				1890	TZApps is an image that runs in the secure processor state. It is
				1891	used to decrypt data and perform secure operations on the behalf of
				1892	the kernel.
				1893
				1894	config MSM_PIL_DSPS
				1895	tristate "DSPS Boot Support"
Stephen Boyd	7b973de	2012-03-09 12:26:16 -0800	[diff] [blame]	1896	depends on MSM_PIL
				1897	help
				1898	Support for booting and shutting down ARM7 DSPS processors.
				1899
				1900	DSPS is a sensors offloading processor used for applications such
				1901	as rotation detection, temperature, etc.
Matt Wagantall	292aace	2012-01-26 19:12:34 -0800	[diff] [blame]	1902
				1903	config MSM_PIL_VIDC
				1904	tristate "Video Core Secure Boot Support"
				1905	depends on MSM_PIL
				1906	help
				1907	Support for authenticating the video core image.
				1908
Tianyi Gou	828798d	2012-05-02 21:12:38 -0700	[diff] [blame]	1909	config MSM_PIL_VENUS
				1910	tristate "VENUS (Video) Boot Support"
				1911	depends on MSM_PIL
				1912	help
				1913	Support for booting and shutting down the VENUS processor (Video).
				1914	Venus is the Video subsystem processor used for video codecs.
				1915
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1916	config MSM_PIL_GSS
				1917	tristate "GSS (Coretx A5) Boot Support"
				1918	depends on MSM_PIL
				1919	help
				1920	Support for booting and shutting down Cortex A5 processors which run
				1921	GPS subsystem firmware.
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1922
Tianyi Gou	c1e049f8	2011-11-23 14:20:16 -0800	[diff] [blame]	1923	config MSM_PIL_PRONTO
				1924	tristate "PRONTO (WCNSS) Boot Support"
				1925	depends on MSM_PIL
				1926	help
				1927	Support for booting and shutting down the PRONTO processor (WCNSS).
				1928	PRONTO is the wireless subsystem processor used in bluetooth, wireless
				1929	LAN, and FM software applications.
				1930
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1931	config MSM_SCM
				1932	bool "Secure Channel Manager (SCM) support"
				1933	default n
				1934
				1935	config MSM_SUBSYSTEM_RESTART
				1936	bool "MSM Subsystem Restart Driver"
				1937	depends on (ARCH_MSM8X60 \|\| ARCH_MSM8960 \|\| ARCH_MSM9615)
				1938	default n
				1939	help
				1940	This option enables the MSM subsystem restart driver, which provides
				1941	a framework to handle subsystem crashes.
				1942
Matt Wagantall	f802090	2011-08-30 21:19:23 -0700	[diff] [blame]	1943	config MSM_SYSMON_COMM
				1944	bool "MSM System Monitor communication support"
				1945	depends on MSM_SMD && MSM_SUBSYSTEM_RESTART
				1946	default y
				1947	help
				1948	This option adds support for MSM System Monitor library, which
				1949	provides an API that may be used for notifying subsystems within
				1950	the SoC about other subsystems' power-up/down state-changes.
				1951
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1952	config MSM_MODEM_8960
				1953	bool "MSM 8960 Modem driver"
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1954	depends on (ARCH_MSM8960 \|\| ARCH_MSM9615)
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1955	help
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1956	This option enables the modem driver for the MSM8960 and MSM9615, which monitors
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1957	modem hardware watchdog interrupt lines and plugs into the subsystem
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1958	restart and PIL drivers. For MSM9615, it only supports a full chip reset.
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1959
Bharath Ramachandramurthy	ff061c7	2011-06-27 14:22:33 -0700	[diff] [blame]	1960	config MSM_LPASS_8960
				1961	tristate "MSM 8960 Lpass driver"
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1962	depends on (ARCH_MSM8960 \|\| ARCH_MSM9615)
Bharath Ramachandramurthy	ff061c7	2011-06-27 14:22:33 -0700	[diff] [blame]	1963	help
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1964	This option enables the lpass driver for the MSM8960 and MSM9615. This monitors
Bharath Ramachandramurthy	ff061c7	2011-06-27 14:22:33 -0700	[diff] [blame]	1965	lpass hardware watchdog interrupt lines and plugs into the subsystem
Rohit Vaswani	56dd22a	2011-11-11 16:21:28 -0800	[diff] [blame]	1966	restart and PIL drivers. For MSM9615, it only supports a full chip reset.
Bharath Ramachandramurthy	ff061c7	2011-06-27 14:22:33 -0700	[diff] [blame]	1967
Ankur Nandwani	e258cf0	2011-08-19 10:16:38 -0700	[diff] [blame]	1968	config MSM_WCNSS_SSR_8960
				1969	tristate "MSM 8960 WCNSS restart module"
				1970	depends on (ARCH_MSM8960)
				1971	help
				1972	This option enables the WCNSS restart module for MSM8960, which
				1973	monitors WCNSS hardware watchdog interrupt lines and plugs WCNSS
				1974	into the subsystem restart framework.
				1975
Rohit Vaswani	d0fb418	2012-03-19 18:07:59 -0700	[diff] [blame]	1976	config MSM_GSS_SSR_8064
				1977	bool "MSM 8064 GSS restart driver"
				1978	depends on (ARCH_APQ8064)
				1979	help
				1980	This option enables the gps subsystem restart driver for APQ8064, which monitors
				1981	gss hardware watchdog interrupt lines and plugs into the subsystem
				1982	restart and PIL drivers.
				1983
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1984	config SCORPION_Uni_45nm_BUG
				1985	bool "Scorpion Uni 45nm(SC45U): Workaround for ICIMVAU and BPIMVA"
				1986	depends on ARCH_MSM7X30 \|\| (ARCH_QSD8X50 && MSM_SOC_REV_A)
				1987	default y
				1988	help
				1989	Invalidating the Instruction Cache by Modified Virtual Address to PoU and
				1990	invalidating the Branch Predictor Array by Modified Virtual Address can
				1991	create invalid entries in the TLB with the wrong ASID values on Scorpion
				1992	Uniprocessor 45nm (SC45U) cores. This option enables the recommended software
				1993	workaround for Scorpion Uniprocessor 45nm cores.
				1994
				1995	This bug is not applicable to any ScorpionMP or Scorpion Uni 65nm(SC65U) cores.
				1996
Harini Jayaraman	ef7805f	2011-09-28 12:45:31 -0600	[diff] [blame]	1997	config MSM_BUSPM_DEV
				1998	tristate "MSM Bus Performance Monitor Kernel Module"
				1999	depends on (ARCH_MSM8X60 \|\| ARCH_MSM8960)
				2000	default m
				2001	help
				2002	This kernel module is used to mmap() hardware registers for the
				2003	performance monitors, counters, etc. The module can also be used to
				2004	allocate physical memory which is used by bus performance hardware to
				2005	dump performance data.
				2006
Mona Hossain	11c03ac	2011-10-26 12:42:10 -0700	[diff] [blame]	2007	config MSM_TZ_LOG
				2008	tristate "MSM Trust Zone (TZ) Log Driver"
				2009	depends on DEBUG_FS
				2010	help
				2011	This option enables a driver with a debugfs interface for messages
				2012	produced by the Secure code (Trust zone). These messages provide
				2013	diagnostic information about TZ operation.
				2014
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2015	config MSM_RPM_LOG
				2016	tristate "MSM Resource Power Manager Log Driver"
				2017	depends on DEBUG_FS
Praveen Chidambaram	7a71223	2011-10-28 13:39:45 -0600	[diff] [blame]	2018	depends on MSM_RPM
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2019	default n
				2020	help
				2021	This option enables a driver which can read from a circular buffer
				2022	of messages produced by the RPM. These messages provide diagnostic
				2023	information about RPM operation. The driver outputs the messages
				2024	via a debugfs node.
				2025
				2026	config MSM_RPM_STATS_LOG
				2027	tristate "MSM Resource Power Manager Stat Driver"
				2028	depends on DEBUG_FS
Praveen Chidambaram	7a71223	2011-10-28 13:39:45 -0600	[diff] [blame]	2029	depends on MSM_RPM
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2030	default n
				2031	help
				2032	This option enables a driver which reads RPM messages from a shared
				2033	memory location. These messages provide statistical information about
				2034	the low power modes that RPM enters. The drivers outputs the message
				2035	via a debugfs node.
				2036
Girish Mahadevan	898c56d	2012-06-05 16:09:19 -0600	[diff] [blame]	2037	config MSM_RPM_RBCPR_STATS_LOG
				2038	tristate "MSM Resource Power Manager RPBCPR Stat Driver"
				2039	depends on DEBUG_FS
				2040	depends on MSM_RPM
				2041	help
				2042	This option enables a driver which reads RPM messages from a shared
				2043	memory location. These messages provide statistical information about
				2044	RBCPR (Rapid Bridge Core Power Reduction) information . The drivers
				2045	outputs the message via a debugfs node.
				2046
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2047	config MSM_DIRECT_SCLK_ACCESS
				2048	bool "Direct access to the SCLK timer"
				2049	default n
				2050
				2051	config IOMMU_API
				2052	bool
Gregory Bean	1963a2a	2010-08-28 10:05:44 -0700	[diff] [blame]	2053
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	2054	config MSM_GPIOMUX
				2055	bool
				2056
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2057	config MSM_SECURE_IO
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	2058	bool
Stepan Moskovchenko	0ab84745	2010-11-12 19:29:57 -0800	[diff] [blame]	2059
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2060	config MSM_NATIVE_RESTART
Stephen Boyd	2a1eb58	2010-08-27 10:01:23 -0700	[diff] [blame]	2061	bool
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2062
Taniya Das	cd1d023	2012-07-03 17:50:47 +0530	[diff] [blame]	2063	config MSM_MODEM_RESTART
				2064	bool
				2065
Matt Wagantall	88b8631	2012-01-31 16:53:03 -0800	[diff] [blame]	2066	config MSM_PM2
				2067	depends on PM
				2068	bool
				2069
				2070	config MSM_PM8X60
				2071	depends on PM
				2072	bool
				2073
				2074	config MSM_NOPM
				2075	default y if !PM
				2076	bool
				2077
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2078	config MSM_BUS_SCALING
				2079	bool "Bus scaling driver"
				2080	default n
				2081
Gagan Mac	85c7049	2011-06-10 16:07:47 -0600	[diff] [blame]	2082	config MSM_BUS_RPM_MULTI_TIER_ENABLED
				2083	bool "RPM Multi-tiering Configuration"
				2084	depends on MSM_BUS_SCALING
				2085
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2086	config MSM_WATCHDOG
				2087	bool "MSM Watchdog Support"
Rohit Vaswani	e897f84	2012-03-19 14:19:34 -0700	[diff] [blame]	2088	depends on ARCH_MSM8X60 \|\| ARCH_MSM8960 \|\| ARCH_MSM9615 \|\| ARCH_FSM9XXX
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2089	help
				2090	This enables the watchdog as is present on 8x60. Currently we use
				2091	core 0's watchdog, and reset the entire SoC if it times out. It does
				2092	not run during the bootup process, so it will not catch any early
				2093	lockups.
				2094
Hanumant Singh	d1f0102	2012-07-05 14:21:53 -0700	[diff] [blame]	2095	config MSM_WATCHDOG_V2
				2096	bool "MSM Watchdog Support"
				2097	help
				2098	This enables the watchdog module. It causes kernel panic if the
				2099	watchdog times out. It allows for detection of cpu hangs and
				2100	deadlocks. It does not run during the bootup process, so it will
				2101	not catch any early lockups.
				2102
Hanumant Singh	5e2541c	2012-07-31 14:41:14 -0700	[diff] [blame]	2103	config MSM_MEMORY_DUMP
				2104	bool "MSM Memory Dump Support"
				2105	help
				2106	This enables memory dump feature. It allows various client
				2107	subsystems to register respective dump regions. At the time
				2108	of deadlocks or cpu hangs these dump regions are captured to
				2109	give a snapshot of the system at the time of the crash.
				2110
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2111	config MSM_DLOAD_MODE
				2112	bool "Enable download mode on crashes"
Rohit Vaswani	92b071a	2011-10-18 20:10:09 -0700	[diff] [blame]	2113	depends on ARCH_MSM8X60 \|\| ARCH_MSM8960 \|\| ARCH_MSM9615
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2114	default n
				2115	help
				2116	This makes the SoC enter download mode when it resets
				2117	due to a kernel panic. Note that this doesn't by itself
				2118	make the kernel reboot on a kernel panic - that must be
				2119	enabled via another mechanism.
				2120
Pratik Patel	17f3b82	2011-11-21 12:41:47 -0800	[diff] [blame]	2121	config MSM_JTAG
Pratik Patel	2963de4	2012-05-17 12:43:40 -0700	[diff] [blame]	2122	bool "JTAG and kernel debug and trace support across power collapse"
Pratik Patel	fd6f56a	2011-10-10 17:47:55 -0700	[diff] [blame]	2123	help
Pratik Patel	2963de4	2012-05-17 12:43:40 -0700	[diff] [blame]	2124	Enables support for kernel debugging (specifically breakpoints) and
				2125	processor tracing across power collapse both for JTag and OS hosted
				2126	software running on the target. Enabling this will ensure debug
				2127	and ETM registers are saved and restored across power collapse.
				2128
				2129	For production builds, you should probably say 'N' here to avoid
				2130	potential power, performance and memory penalty.
Pratik Patel	7831c08	2011-06-08 21:44:37 -0700	[diff] [blame]	2131
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2132	config MSM_ETM
				2133	tristate "Enable MSM ETM and ETB"
Pratik Patel	17f3b82	2011-11-21 12:41:47 -0800	[diff] [blame]	2134	depends on ARCH_MSM8X60
				2135	select MSM_JTAG
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2136	help
Pratik Patel	17f3b82	2011-11-21 12:41:47 -0800	[diff] [blame]	2137	Enables embedded trace collection on MSM8660
Pratik Patel	7831c08	2011-06-08 21:44:37 -0700	[diff] [blame]	2138
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2139	config MSM_SLEEP_STATS
				2140	bool "Enable exporting of MSM sleep stats to userspace"
				2141	depends on CPU_IDLE
				2142	default n
				2143
Lynus Vaz	dde09ee	2012-01-05 13:28:22 +0530	[diff] [blame]	2144	config MSM_SLEEP_STATS_DEVICE
				2145	bool "Enable exporting of MSM sleep device stats to userspace"
				2146
Krishna Vanka	7f563ff	2012-03-20 22:04:19 +0530	[diff] [blame]	2147	config MSM_RUN_QUEUE_STATS
				2148	bool "Enable collection and exporting of MSM Run Queue stats to userspace"
Krishna Vanka	e292205	2012-03-02 09:59:12 +0530	[diff] [blame]	2149	depends on (MSM_SOC_REV_A \|\| ARCH_MSM8X60 \|\| ARCH_MSM8960)
				2150	help
				2151	This option enalbes statistics collection on Run Queue. A daemon
				2152	in user mode, called MPDecision will be using this data to decide
				2153	on when to switch off/on the other cores.
Krishna Vanka	7f563ff	2012-03-20 22:04:19 +0530	[diff] [blame]	2154
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2155	config MSM_STANDALONE_POWER_COLLAPSE
				2156	bool "Enable standalone power collapse"
				2157	default n
				2158
				2159	config MSM_GSBI9_UART
				2160	bool "Enable GSBI9 UART device"
				2161	default n
				2162	help
				2163	This enables GSBI9 configured into UART.
				2164
				2165	config MSM_SHARED_GPIO_FOR_UART2DM
				2166	bool "Use shared GPIOs into UART mode"
				2167	depends on (ARCH_MSM7X27A && !MMC_MSM_SDC3_8_BIT_SUPPORT && !MMC_MSM_SDC4_SUPPORT)
				2168	help
				2169	This option configures GPIO muxed with SDC4/MMC3
				2170	8-bit mode into UART mode. It is used for serial
				2171	console on UART2DM. Say Y if you want to have
				2172	serial console on UART2DM.
				2173
				2174	config MSM_SHOW_RESUME_IRQ
				2175	bool "Enable logging of interrupts that could have caused resume"
Bryan Huntsman	cc14703	2011-11-23 13:03:56 -0800	[diff] [blame]	2176	depends on (ARM_GIC \|\| PMIC8058)
				2177	default y if PMIC8058
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2178	default n
				2179	help
				2180	This option logs wake up interrupts that have triggered just before
				2181	the resume loop unrolls. Say Y if you want to debug why the system
				2182	resumed.
				2183
				2184	config BT_MSM_PINTEST
				2185	tristate "MSM Bluetooth Pin Connectivity Test"
				2186	depends on ((ARCH_MSM8X60 \|\| ARCH_MSM7X27A) && DEBUG_FS)
				2187	default n
				2188	help
				2189	Bluetooth MSM Pin Connectivity test module.
				2190	This driver provides support for verifying the MSM to BT pin
				2191	connectivity.
				2192
				2193	config MSM_FAKE_BATTERY
				2194	depends on POWER_SUPPLY
				2195	default n
				2196	bool "MSM Fake Battery"
				2197	help
				2198	Enables MSM fake battery driver.
				2199
				2200	config MSM_QDSP6_APR
				2201	bool "Audio QDSP6 APR support"
				2202	depends on MSM_SMD
				2203	default n
				2204	help
				2205	Enable APR IPC protocol support between
				2206	application processor and QDSP6. APR is
				2207	used by audio driver to configure QDSP6's
				2208	ASM, ADM and AFE.
				2209
Joonwoo Park	91d9546	2012-08-02 10:55:54 -0700	[diff] [blame^]	2210	config MSM_QDSP6_APRV2
				2211	bool "Audio QDSP6 APRv2 support"
				2212	depends on MSM_SMD
				2213	default n
				2214	help
				2215	Enable APRv2 IPC protocol support between
				2216	application processor and QDSP6. APR is
				2217	used by audio driver to configure QDSP6's
				2218	ASM, ADM and AFE.
				2219
Harmandeep Singh	c35fa07d	2012-05-31 07:08:59 -0700	[diff] [blame]	2220	config MSM_QDSP6_CODECS
				2221	bool "Audio Codecs on QDSP6 APR "
				2222	depends on MSM_SMD
				2223	default n
				2224	help
				2225	Enable Audio codecs with APR IPC protocol support between
				2226	application processor and QDSP6. APR is
				2227	used by audio driver to configure QDSP6's
				2228	ASM, ADM and AFE.
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2229
Harmandeep Singh	e5ddfe3	2012-05-26 09:39:25 -0700	[diff] [blame]	2230	config MSM_QDSP6V2_CODECS
				2231	bool "Audio QDSP6V2 APR support"
				2232	depends on MSM_SMD
				2233	help
				2234	Enable Audio codecs with APR IPC protocol support between
				2235	application processor and QDSP6 for B-family. APR is
				2236	used by audio driver to configure QDSP6's
				2237	ASM, ADM and AFE.
				2238
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2239	config MSM_AUDIO_QDSP6
				2240	bool "QDSP6 HW Audio support"
				2241	select SND_SOC_MSM_QDSP6_INTF
				2242	default n
				2243	help
				2244	Enable HW audio support in QDSP6.
				2245	QDSP6 can support HW encoder & decoder and audio processing
				2246
Harmandeep Singh	e5ddfe3	2012-05-26 09:39:25 -0700	[diff] [blame]	2247	config MSM_AUDIO_QDSP6V2
				2248	bool "QDSP6V2 HW Audio support"
				2249	select SND_SOC_MSM_QDSP6V2_INTF
				2250	help
				2251	Enable HW audio support in QDSP6V2.
				2252	QDSP6V2 can support HW encoder & decoder and
				2253	audio processing. It will enable support for
				2254	AAC, AMRNB, AMRWB, EVRC, MP3, QCELP among
				2255	others.
				2256
Baruch Eruchimovitch	e9cbfc1	2011-10-09 19:47:08 +0200	[diff] [blame]	2257	config MSM_ULTRASOUND
				2258	bool "MSM ultrasound support"
				2259	depends on MSM_AUDIO_QDSP6
				2260	help
				2261	Enable support for qdsp6/ultrasound.
				2262
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	2263	config MSM_RPC_VIBRATOR
				2264	bool "RPC based MSM Vibrator Support"
				2265	depends on MSM_ONCRPCROUTER
				2266	help
				2267	Enable the vibrator support on MSM over RPC. The vibrator
				2268	is connected on the PMIC. Say Y if you want to enable this
				2269	feature.
				2270
				2271	config PM8XXX_RPC_VIBRATOR
				2272	bool "RPC based Vibrator on PM8xxx PMICs"
				2273	depends on MSM_RPC_VIBRATOR
				2274	help
				2275	Enable the vibrator support on MSM over RPC. The vibrator
				2276	is connected on the PM8XXX PMIC. Say Y if you want to enable
				2277	this feature.
				2278
				2279	config MSM_SPM_V1
				2280	bool "Driver support for SPM Version 1"
				2281	help
				2282	Enables the support for Version 1 of the SPM driver. SPM hardware is
				2283	used to manage the processor power during sleep. The driver allows
				2284	configuring SPM to allow different power modes.
				2285
				2286	config MSM_SPM_V2
				2287	bool "Driver support for SPM Version 2"
				2288	help
				2289	Enables the support for Version 2 of the SPM driver. SPM hardware is
				2290	used to manage the processor power during sleep. The driver allows
				2291	configuring SPM to allow different power modes.
				2292
				2293	config MSM_L2_SPM
				2294	bool "SPM support for L2 cache"
				2295	depends on MSM_SPM_V2
				2296	help
				2297	Enable SPM driver support for L2 cache. Some MSM chipsets allow
				2298	control of L2 cache low power mode with a Subsystem Power manager.
				2299	Enabling this driver allows configuring L2 SPM for low power modes
				2300	on supported chipsets.
				2301
Laura Abbott	2d1760b	2011-09-29 21:31:24 -0700	[diff] [blame]	2302	config MSM_MULTIMEDIA_USE_ION
				2303	bool "Multimedia suport using Ion"
				2304	depends on ION_MSM
				2305	help
				2306	Enable support for multimedia drivers using Ion for buffer management
				2307	instead of pmem. Selecting this may also involve userspace
				2308	dependencies as well.
				2309
Naveen Ramaraj	51f5e8b	2012-04-09 15:58:40 -0700	[diff] [blame]	2310	config MSM_OCMEM
				2311	bool "MSM On-Chip memory driver (OCMEM)"
				2312	help
				2313	Enable support for On-Chip Memory available on certain MSM chipsets.
				2314	OCMEM is a low latency, high performance pool shared by subsystems.
				2315
Naveen Ramaraj	99b0756	2012-05-28 20:57:09 -0700	[diff] [blame]	2316	config MSM_OCMEM_LOCAL_POWER_CTRL
				2317	bool "OCMEM Local Power Control"
				2318	depends on MSM_OCMEM
				2319	help
				2320	Enable direct power management of the OCMEM core by the
				2321	OCMEM driver. By default power management is delegated to
				2322	the RPM. Selecting this option causes the OCMEM driver to
				2323	directly handle the various macro power transitions.
				2324
				2325	config MSM_OCMEM_DEBUG
				2326	bool "OCMEM Debug Support"
				2327	depends on MSM_OCMEM
				2328	help
				2329	Enable debug options for On-chip Memory (OCMEM) driver.
				2330	Various debug options include memory, power and latency.
				2331	Choosing one of these options allows debugging of each
				2332	individual subsystem separately.
				2333
				2334	config MSM_OCMEM_POWER_DEBUG
				2335	bool "OCMEM Power Debug Support"
				2336	depends on MSM_OCMEM_DEBUG
				2337	help
				2338	Enable debug support for OCMEM power management.
				2339	This adds support for verifying all power management
				2340	related operations of OCMEM. Both local power management
				2341	and RPM assisted power management operations are supported.
				2342
Naveen Ramaraj	4b1d939	2012-08-06 21:05:14 -0700	[diff] [blame]	2343	config MSM_OCMEM_POWER_DISABLE
				2344	bool "OCMEM Disable Power Control"
				2345	depends on MSM_OCMEM_DEBUG
				2346	help
				2347	Disable all OCMEM power management.
				2348	This keeps all OCMEM macros turned ON at all times thus
				2349	never allowing them to be turned OFF. Both local power
				2350	management and RPM assisted power modes are supported.
				2351
Laura Abbott	ad340ff	2012-01-04 14:23:48 -0800	[diff] [blame]	2352	config MSM_RTB
				2353	bool "Register tracing"
				2354	help
				2355	Add support for logging different events to a small uncached
				2356	region. This is designed to aid in debugging reset cases where the
				2357	caches may not be flushed before the target resets.
				2358
				2359	config MSM_RTB_SEPARATE_CPUS
				2360	bool "Separate entries for each cpu"
				2361	depends on MSM_RTB
Laura Abbott	9959f98	2012-02-28 11:30:50 -0800	[diff] [blame]	2362	depends on SMP
Laura Abbott	ad340ff	2012-01-04 14:23:48 -0800	[diff] [blame]	2363	help
				2364	Under some circumstances, it may be beneficial to give dedicated space
				2365	for each cpu to log accesses. Selecting this option will log each cpu
				2366	separately. This will guarantee that the last acesses for each cpu
				2367	will be logged but there will be fewer entries per cpu
				2368
Stepan Moskovchenko	5788484	2012-06-07 17:35:49 -0700	[diff] [blame]	2369	config MSM_EBI_ERP
				2370	bool "External Bus Interface (EBI) error reporting"
				2371	help
				2372	Say 'Y' here to enable reporting of external bus interface errors to
				2373	the kernel log. Information such as the offending address and
				2374	transaction type will be logged. This may be useful for debugging
				2375	seemingly broken memory accesses.
				2376
				2377	For production builds, you should probably say 'N' here.
				2378
Stepan Moskovchenko	07552e1	2012-02-29 20:09:32 -0800	[diff] [blame]	2379	config MSM_CACHE_ERP
				2380	bool "Cache / CPU error reporting"
				2381	depends on ARCH_MSM_KRAIT
				2382	help
				2383	Say 'Y' here to enable reporting of cache and TLB errors to the kernel
				2384	log. Enabling this feature can be used as a system debugging technique
				2385	if cache corruption is suspected. Cache error statistics will also be
				2386	reported in /proc/cpu/msm_cache_erp.
				2387
				2388	For production builds, you should probably say 'N' here.
				2389
				2390	config MSM_L1_ERR_PANIC
Stepan Moskovchenko	1b0c174	2012-04-30 14:53:16 -0700	[diff] [blame]	2391	bool "Panic on L1 cache errors"
Stepan Moskovchenko	07552e1	2012-02-29 20:09:32 -0800	[diff] [blame]	2392	depends on MSM_CACHE_ERP
				2393	help
Stepan Moskovchenko	1b0c174	2012-04-30 14:53:16 -0700	[diff] [blame]	2394	To cause the kernel to panic whenever an L1 cache error is detected, say
				2395	'Y' here. This may be useful as a debugging technique if general system
				2396	instability is suspected.
Stepan Moskovchenko	07552e1	2012-02-29 20:09:32 -0800	[diff] [blame]	2397
				2398	For production builds, you should probably say 'N' here.
				2399
Stepan Moskovchenko	7035f65	2012-05-31 17:48:01 -0700	[diff] [blame]	2400	config MSM_L1_ERR_LOG
				2401	bool "Log CPU ERP events to system memory"
				2402	depends on MSM_CACHE_ERP
				2403	help
				2404	Enable logging CPU ERP events to an area of memory that will be
				2405	preserved across a system reset. This may be useful for detecting and
				2406	troubleshooting ERP-related system crashes in the field.
				2407
				2408	For production builds, you may want to say 'Y' here.
				2409
Stepan Moskovchenko	e9a5dc1	2012-04-03 20:25:49 -0700	[diff] [blame]	2410	config MSM_L2_ERP_PRINT_ACCESS_ERRORS
				2411	bool "Report L2 master port slave/decode errors in kernel log"
				2412	depends on MSM_CACHE_ERP
				2413	help
				2414	Master port errors can occur when a memory request is not properly
				2415	handled by the destination slave. This can occur if the destination
				2416	register does not exist or is inaccessible due to security
				2417	restrictions or (in some cases) clock configuration. Enabling this
				2418	option will cause a backtrace to be printed to the kernel log whenever
				2419	such an error is encountered. Note that the error is reported as an
				2420	interrupt rather than as an exception, meaning that the backtrace may
				2421	have some skid. This option may help with debugging, though production
				2422	builds should probably say 'N' here.
Stepan Moskovchenko	07552e1	2012-02-29 20:09:32 -0800	[diff] [blame]	2423
				2424	config MSM_L2_ERP_PORT_PANIC
				2425	bool "Panic on L2 master port errors"
Stepan Moskovchenko	e9a5dc1	2012-04-03 20:25:49 -0700	[diff] [blame]	2426	depends on MSM_CACHE_ERP && MSM_L2_ERP_PRINT_ACCESS_ERRORS
Stepan Moskovchenko	07552e1	2012-02-29 20:09:32 -0800	[diff] [blame]	2427	help
				2428	Master port errors can occur when a memory request is not properly
				2429	handled by the destination slave. Enable this option to catch drivers
				2430	which attempt to access bad areas of the address space, or access
				2431	hardware registers in an improper state (such as certain clocks not
				2432	being on). This option may help with debugging, though production
				2433	builds should probably say 'N' here.
				2434
				2435	config MSM_L2_ERP_1BIT_PANIC
				2436	bool "Panic on recoverable L2 soft errors"
				2437	depends on MSM_CACHE_ERP
				2438	help
				2439	Enable this option to cause a kernel panic whenever the L2 cache
				2440	encounters a single-bit (correctable) soft error. This option should
				2441	only be enabled when doing low-level debugging where cache corruption
				2442	is suspected.
				2443
				2444	For production builds, you should definitely say 'N' here.
				2445
				2446	config MSM_L2_ERP_2BIT_PANIC
				2447	bool "Panic on unrecoverable L2 soft errors"
				2448	depends on MSM_CACHE_ERP
				2449	help
				2450	Enable this option to cause a kernel panic whenever the L2 cache
				2451	encounters a double-bit (non-correctable) soft error. Debug builds
				2452	will likely benefit from having this option enabled to catch cache
				2453	problems as soon as possible.
				2454
				2455	For production builds, it may be acceptable to say 'N' here, since
				2456	an uncorrectable error might not necessarily cause further problems.
Laura Abbott	ad340ff	2012-01-04 14:23:48 -0800	[diff] [blame]	2457
Praveen Chidambaram	f53ef1b	2011-12-06 08:27:49 -0700	[diff] [blame]	2458	config MSM_DCVS
				2459	bool "Use MSM DCVS for CPU/GPU Frequency control"
				2460	depends on MSM_SCM
				2461	help
				2462	Enable support for MSM DCVS to control all CPU and GPU core frequencies.
				2463	The DCVS manager allows idle driver to feed the idle information to the
				2464	algorithm and the algorithm returns a frequency for the core which is
				2465	passed to the frequency change driver.
				2466
Taniya Das	c43e687	2012-03-21 16:41:14 +0530	[diff] [blame]	2467	config HAVE_ARCH_HAS_CURRENT_TIMER
				2468	bool
Laura Abbott	306bcc2	2012-03-08 11:24:53 -0800	[diff] [blame]	2469
				2470	config MSM_CACHE_DUMP
				2471	bool "Cache dumping support"
				2472	help
				2473	Add infrastructure to dump the L1 and L2 caches to an allocated buffer.
				2474	This allows for analysis of the caches in case cache corruption is
				2475	suspected.
				2476
Laura Abbott	7b63736	2012-03-29 16:43:49 -0700	[diff] [blame]	2477	config MSM_CACHE_DUMP_ON_PANIC
				2478	bool "Dump caches on panic"
				2479	depends on MSM_CACHE_DUMP
				2480	help
				2481	By default, the caches are flushed on panic. This means that trying to
				2482	look at them in a RAM dump will give useless data. Select this if you
				2483	want to dump the L1 and L2 caches on panic before any flush occurs.
				2484	If unsure, say N
				2485
Jack Pham	ccbbfab	2012-04-09 19:50:20 -0700	[diff] [blame]	2486	config MSM_HSIC_SYSMON
				2487	tristate "MSM HSIC system monitor driver"
				2488	depends on USB
				2489	help
				2490	Add support for bridging with the system monitor interface of MDM
				2491	over HSIC. This driver allows the local system monitor to
				2492	communicate with the remote system monitor interface.
				2493
				2494	config MSM_HSIC_SYSMON_TEST
				2495	tristate "MSM HSIC system monitor bridge test"
				2496	depends on USB && MSM_HSIC_SYSMON && DEBUG_FS
				2497	help
				2498	Enable the test hook for the Qualcomm system monitor HSIC driver.
				2499	This will create a debugfs file entry named "hsic_sysmon_test" which
				2500	can be read and written to send character data to the sysmon port of
				2501	the modem over USB.
				2502
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	2503	endif