| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 1 | /* | 
 | 2 |  * pata_cs5536.c	- CS5536 PATA for new ATA layer | 
 | 3 |  *			  (C) 2007 Martin K. Petersen <mkp@mkp.net> | 
 | 4 |  * | 
 | 5 |  * This program is free software; you can redistribute it and/or modify | 
 | 6 |  * it under the terms of the GNU General Public License version 2 as | 
 | 7 |  * published by the Free Software Foundation. | 
 | 8 |  * | 
 | 9 |  * This program is distributed in the hope that it will be useful, | 
 | 10 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 | 11 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the | 
 | 12 |  * GNU General Public License for more details. | 
 | 13 |  * | 
 | 14 |  * You should have received a copy of the GNU General Public License | 
 | 15 |  * along with this program; if not, write to the Free Software | 
 | 16 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307	 USA | 
 | 17 |  * | 
 | 18 |  * Documentation: | 
 | 19 |  *	Available from AMD web site. | 
 | 20 |  * | 
 | 21 |  * The IDE timing registers for the CS5536 live in the Geode Machine | 
 | 22 |  * Specific Register file and not PCI config space.  Most BIOSes | 
 | 23 |  * virtualize the PCI registers so the chip looks like a standard IDE | 
 | 24 |  * controller.	Unfortunately not all implementations get this right. | 
 | 25 |  * In particular some have problems with unaligned accesses to the | 
 | 26 |  * virtualized PCI registers.  This driver always does full dword | 
 | 27 |  * writes to work around the issue.  Also, in case of a bad BIOS this | 
 | 28 |  * driver can be loaded with the "msr=1" parameter which forces using | 
 | 29 |  * the Machine Specific Registers to configure the device. | 
 | 30 |  */ | 
 | 31 |  | 
 | 32 | #include <linux/kernel.h> | 
 | 33 | #include <linux/module.h> | 
 | 34 | #include <linux/pci.h> | 
 | 35 | #include <linux/init.h> | 
 | 36 | #include <linux/blkdev.h> | 
 | 37 | #include <linux/delay.h> | 
 | 38 | #include <linux/libata.h> | 
 | 39 | #include <scsi/scsi_host.h> | 
 | 40 | #include <asm/msr.h> | 
 | 41 |  | 
 | 42 | #define DRV_NAME	"pata_cs5536" | 
| Martin K. Petersen | b6966a6 | 2008-02-13 01:41:44 -0500 | [diff] [blame] | 43 | #define DRV_VERSION	"0.0.7" | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 44 |  | 
 | 45 | enum { | 
 | 46 | 	CFG			= 0, | 
 | 47 | 	DTC			= 1, | 
 | 48 | 	CAST			= 2, | 
 | 49 | 	ETC			= 3, | 
 | 50 |  | 
 | 51 | 	MSR_IDE_BASE		= 0x51300000, | 
 | 52 | 	MSR_IDE_CFG		= (MSR_IDE_BASE + 0x10), | 
 | 53 | 	MSR_IDE_DTC		= (MSR_IDE_BASE + 0x12), | 
 | 54 | 	MSR_IDE_CAST		= (MSR_IDE_BASE + 0x13), | 
 | 55 | 	MSR_IDE_ETC		= (MSR_IDE_BASE + 0x14), | 
 | 56 |  | 
 | 57 | 	PCI_IDE_CFG		= 0x40, | 
 | 58 | 	PCI_IDE_DTC		= 0x48, | 
 | 59 | 	PCI_IDE_CAST		= 0x4c, | 
 | 60 | 	PCI_IDE_ETC		= 0x50, | 
 | 61 |  | 
 | 62 | 	IDE_CFG_CHANEN		= 0x2, | 
 | 63 | 	IDE_CFG_CABLE		= 0x10000, | 
 | 64 |  | 
 | 65 | 	IDE_D0_SHIFT		= 24, | 
 | 66 | 	IDE_D1_SHIFT		= 16, | 
 | 67 | 	IDE_DRV_MASK		= 0xff, | 
 | 68 |  | 
 | 69 | 	IDE_CAST_D0_SHIFT	= 6, | 
 | 70 | 	IDE_CAST_D1_SHIFT	= 4, | 
 | 71 | 	IDE_CAST_DRV_MASK	= 0x3, | 
 | 72 | 	IDE_CAST_CMD_MASK	= 0xff, | 
 | 73 | 	IDE_CAST_CMD_SHIFT	= 24, | 
 | 74 |  | 
 | 75 | 	IDE_ETC_NODMA		= 0x03, | 
 | 76 | }; | 
 | 77 |  | 
 | 78 | static int use_msr; | 
 | 79 |  | 
 | 80 | static const u32 msr_reg[4] = { | 
 | 81 | 	MSR_IDE_CFG, MSR_IDE_DTC, MSR_IDE_CAST, MSR_IDE_ETC, | 
 | 82 | }; | 
 | 83 |  | 
 | 84 | static const u8 pci_reg[4] = { | 
 | 85 | 	PCI_IDE_CFG, PCI_IDE_DTC, PCI_IDE_CAST, PCI_IDE_ETC, | 
 | 86 | }; | 
 | 87 |  | 
| Harvey Harrison | 2072fb5 | 2008-02-13 21:14:23 -0800 | [diff] [blame] | 88 | static inline int cs5536_read(struct pci_dev *pdev, int reg, u32 *val) | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 89 | { | 
 | 90 | 	if (unlikely(use_msr)) { | 
 | 91 | 		u32 dummy; | 
 | 92 |  | 
 | 93 | 		rdmsr(msr_reg[reg], *val, dummy); | 
 | 94 | 		return 0; | 
 | 95 | 	} | 
 | 96 |  | 
 | 97 | 	return pci_read_config_dword(pdev, pci_reg[reg], val); | 
 | 98 | } | 
 | 99 |  | 
 | 100 | static inline int cs5536_write(struct pci_dev *pdev, int reg, int val) | 
 | 101 | { | 
 | 102 | 	if (unlikely(use_msr)) { | 
 | 103 | 		wrmsr(msr_reg[reg], val, 0); | 
 | 104 | 		return 0; | 
 | 105 | 	} | 
 | 106 |  | 
 | 107 | 	return pci_write_config_dword(pdev, pci_reg[reg], val); | 
 | 108 | } | 
 | 109 |  | 
 | 110 | /** | 
 | 111 |  *	cs5536_cable_detect	-	detect cable type | 
 | 112 |  *	@ap: Port to detect on | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 113 |  * | 
 | 114 |  *	Perform cable detection for ATA66 capable cable. Return a libata | 
 | 115 |  *	cable type. | 
 | 116 |  */ | 
 | 117 |  | 
 | 118 | static int cs5536_cable_detect(struct ata_port *ap) | 
 | 119 | { | 
 | 120 | 	struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 
 | 121 | 	u32 cfg; | 
 | 122 |  | 
 | 123 | 	cs5536_read(pdev, CFG, &cfg); | 
 | 124 |  | 
 | 125 | 	if (cfg & (IDE_CFG_CABLE << ap->port_no)) | 
 | 126 | 		return ATA_CBL_PATA80; | 
 | 127 | 	else | 
 | 128 | 		return ATA_CBL_PATA40; | 
 | 129 | } | 
 | 130 |  | 
 | 131 | /** | 
 | 132 |  *	cs5536_set_piomode		-	PIO setup | 
 | 133 |  *	@ap: ATA interface | 
 | 134 |  *	@adev: device on the interface | 
 | 135 |  */ | 
 | 136 |  | 
 | 137 | static void cs5536_set_piomode(struct ata_port *ap, struct ata_device *adev) | 
 | 138 | { | 
 | 139 | 	static const u8 drv_timings[5] = { | 
 | 140 | 		0x98, 0x55, 0x32, 0x21, 0x20, | 
 | 141 | 	}; | 
 | 142 |  | 
 | 143 | 	static const u8 addr_timings[5] = { | 
 | 144 | 		0x2, 0x1, 0x0, 0x0, 0x0, | 
 | 145 | 	}; | 
 | 146 |  | 
 | 147 | 	static const u8 cmd_timings[5] = { | 
 | 148 | 		0x99, 0x92, 0x90, 0x22, 0x20, | 
 | 149 | 	}; | 
 | 150 |  | 
 | 151 | 	struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 
 | 152 | 	struct ata_device *pair = ata_dev_pair(adev); | 
 | 153 | 	int mode = adev->pio_mode - XFER_PIO_0; | 
 | 154 | 	int cmdmode = mode; | 
| Martin K. Petersen | b6966a6 | 2008-02-13 01:41:44 -0500 | [diff] [blame] | 155 | 	int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT; | 
 | 156 | 	int cshift = adev->devno ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT; | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 157 | 	u32 dtc, cast, etc; | 
 | 158 |  | 
 | 159 | 	if (pair) | 
 | 160 | 		cmdmode = min(mode, pair->pio_mode - XFER_PIO_0); | 
 | 161 |  | 
 | 162 | 	cs5536_read(pdev, DTC, &dtc); | 
 | 163 | 	cs5536_read(pdev, CAST, &cast); | 
 | 164 | 	cs5536_read(pdev, ETC, &etc); | 
 | 165 |  | 
 | 166 | 	dtc &= ~(IDE_DRV_MASK << dshift); | 
 | 167 | 	dtc |= drv_timings[mode] << dshift; | 
 | 168 |  | 
 | 169 | 	cast &= ~(IDE_CAST_DRV_MASK << cshift); | 
 | 170 | 	cast |= addr_timings[mode] << cshift; | 
 | 171 |  | 
 | 172 | 	cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT); | 
 | 173 | 	cast |= cmd_timings[cmdmode] << IDE_CAST_CMD_SHIFT; | 
 | 174 |  | 
 | 175 | 	etc &= ~(IDE_DRV_MASK << dshift); | 
 | 176 | 	etc |= IDE_ETC_NODMA << dshift; | 
 | 177 |  | 
 | 178 | 	cs5536_write(pdev, DTC, dtc); | 
 | 179 | 	cs5536_write(pdev, CAST, cast); | 
 | 180 | 	cs5536_write(pdev, ETC, etc); | 
 | 181 | } | 
 | 182 |  | 
 | 183 | /** | 
 | 184 |  *	cs5536_set_dmamode		-	DMA timing setup | 
 | 185 |  *	@ap: ATA interface | 
 | 186 |  *	@adev: Device being configured | 
 | 187 |  * | 
 | 188 |  */ | 
 | 189 |  | 
 | 190 | static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev) | 
 | 191 | { | 
 | 192 | 	static const u8 udma_timings[6] = { | 
 | 193 | 		0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6, | 
 | 194 | 	}; | 
 | 195 |  | 
 | 196 | 	static const u8 mwdma_timings[3] = { | 
 | 197 | 		0x67, 0x21, 0x20, | 
 | 198 | 	}; | 
 | 199 |  | 
 | 200 | 	struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 
 | 201 | 	u32 dtc, etc; | 
 | 202 | 	int mode = adev->dma_mode; | 
| Martin K. Petersen | b6966a6 | 2008-02-13 01:41:44 -0500 | [diff] [blame] | 203 | 	int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT; | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 204 |  | 
 | 205 | 	if (mode >= XFER_UDMA_0) { | 
 | 206 | 		cs5536_read(pdev, ETC, &etc); | 
 | 207 |  | 
 | 208 | 		etc &= ~(IDE_DRV_MASK << dshift); | 
 | 209 | 		etc |= udma_timings[mode - XFER_UDMA_0] << dshift; | 
 | 210 |  | 
 | 211 | 		cs5536_write(pdev, ETC, etc); | 
 | 212 | 	} else { /* MWDMA */ | 
 | 213 | 		cs5536_read(pdev, DTC, &dtc); | 
 | 214 |  | 
 | 215 | 		dtc &= ~(IDE_DRV_MASK << dshift); | 
| Bartlomiej Zolnierkiewicz | 80f6fd3 | 2007-10-17 01:23:43 +0200 | [diff] [blame] | 216 | 		dtc |= mwdma_timings[mode - XFER_MW_DMA_0] << dshift; | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 217 |  | 
 | 218 | 		cs5536_write(pdev, DTC, dtc); | 
 | 219 | 	} | 
 | 220 | } | 
 | 221 |  | 
 | 222 | static struct scsi_host_template cs5536_sht = { | 
| Tejun Heo | 68d1d07 | 2008-03-25 12:22:49 +0900 | [diff] [blame] | 223 | 	ATA_BMDMA_SHT(DRV_NAME), | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 224 | }; | 
 | 225 |  | 
 | 226 | static struct ata_port_operations cs5536_port_ops = { | 
| Tejun Heo | 029cfd6 | 2008-03-25 12:22:49 +0900 | [diff] [blame] | 227 | 	.inherits		= &ata_bmdma_port_ops, | 
 | 228 | 	.cable_detect		= cs5536_cable_detect, | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 229 | 	.set_piomode		= cs5536_set_piomode, | 
 | 230 | 	.set_dmamode		= cs5536_set_dmamode, | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 231 | }; | 
 | 232 |  | 
 | 233 | /** | 
 | 234 |  *	cs5536_init_one | 
 | 235 |  *	@dev: PCI device | 
 | 236 |  *	@id: Entry in match table | 
 | 237 |  * | 
 | 238 |  */ | 
 | 239 |  | 
 | 240 | static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id) | 
 | 241 | { | 
 | 242 | 	static const struct ata_port_info info = { | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 243 | 		.flags = ATA_FLAG_SLAVE_POSS, | 
 | 244 | 		.pio_mask = 0x1f, | 
 | 245 | 		.mwdma_mask = 0x07, | 
 | 246 | 		.udma_mask = ATA_UDMA5, | 
 | 247 | 		.port_ops = &cs5536_port_ops, | 
 | 248 | 	}; | 
 | 249 |  | 
 | 250 | 	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; | 
 | 251 | 	u32 cfg; | 
 | 252 |  | 
 | 253 | 	if (use_msr) | 
 | 254 | 		printk(KERN_ERR DRV_NAME ": Using MSR regs instead of PCI\n"); | 
 | 255 |  | 
 | 256 | 	cs5536_read(dev, CFG, &cfg); | 
 | 257 |  | 
 | 258 | 	if ((cfg & IDE_CFG_CHANEN) == 0) { | 
 | 259 | 		printk(KERN_ERR DRV_NAME ": disabled by BIOS\n"); | 
 | 260 | 		return -ENODEV; | 
 | 261 | 	} | 
 | 262 |  | 
| Tejun Heo | 9363c38 | 2008-04-07 22:47:16 +0900 | [diff] [blame] | 263 | 	return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL); | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 264 | } | 
 | 265 |  | 
 | 266 | static const struct pci_device_id cs5536[] = { | 
 | 267 | 	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_CS5536_IDE), }, | 
 | 268 | 	{ }, | 
 | 269 | }; | 
 | 270 |  | 
 | 271 | static struct pci_driver cs5536_pci_driver = { | 
 | 272 | 	.name		= DRV_NAME, | 
 | 273 | 	.id_table	= cs5536, | 
 | 274 | 	.probe		= cs5536_init_one, | 
 | 275 | 	.remove		= ata_pci_remove_one, | 
 | 276 | #ifdef CONFIG_PM | 
 | 277 | 	.suspend	= ata_pci_device_suspend, | 
 | 278 | 	.resume		= ata_pci_device_resume, | 
 | 279 | #endif | 
 | 280 | }; | 
 | 281 |  | 
 | 282 | static int __init cs5536_init(void) | 
 | 283 | { | 
 | 284 | 	return pci_register_driver(&cs5536_pci_driver); | 
 | 285 | } | 
 | 286 |  | 
 | 287 | static void __exit cs5536_exit(void) | 
 | 288 | { | 
 | 289 | 	pci_unregister_driver(&cs5536_pci_driver); | 
 | 290 | } | 
 | 291 |  | 
 | 292 | MODULE_AUTHOR("Martin K. Petersen"); | 
 | 293 | MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller"); | 
 | 294 | MODULE_LICENSE("GPL"); | 
 | 295 | MODULE_DEVICE_TABLE(pci, cs5536); | 
 | 296 | MODULE_VERSION(DRV_VERSION); | 
 | 297 | module_param_named(msr, use_msr, int, 0644); | 
 | 298 | MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)"); | 
 | 299 |  | 
 | 300 | module_init(cs5536_init); | 
 | 301 | module_exit(cs5536_exit); |