include/asm-arm/arch-omap/mux.h

/*
 * linux/include/asm-arm/arch-omap/mux.h
 *
 * Table of the Omap register configurations for the FUNC_MUX and
 * PULL_DWN combinations.
 *
 * Copyright (C) 2003 Nokia Corporation
 *
 * Written by Tony Lindgren <tony.lindgren@nokia.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 *
 * NOTE: Please use the following naming style for new pin entries.
 *	 For example, W8_1610_MMC2_DAT0, where:
 *	 - W8	     = ball
 *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
 *	 - MMC2_DAT0 = function
 *
 * Change log:
 *   Added entry for the I2C interface. (02Feb 2004)
 *   Copyright (C) 2004 Texas Instruments
 *
 *   Added entry for the keypad and uwire CS1. (09Mar 2004)
 *   Copyright (C) 2004 Texas Instruments
 *
 */

#ifndef __ASM_ARCH_MUX_H
#define __ASM_ARCH_MUX_H

#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */

#ifdef	CONFIG_OMAP_MUX_DEBUG
#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
					.mux_reg = FUNC_MUX_CTRL_##reg, \
					.mask_offset = mode_offset, \
					.mask = mode,

#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
					.pull_reg = PULL_DWN_CTRL_##reg, \
					.pull_bit = bit, \
					.pull_val = status,

#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
					.pu_pd_reg = PU_PD_SEL_##reg, \
					.pu_pd_val = status,

#else

#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
					.mask_offset = mode_offset, \
					.mask = mode,

#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
					.pull_bit = bit, \
					.pull_val = status,

#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
					.pu_pd_val = status,

#endif /* CONFIG_OMAP_MUX_DEBUG */

#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
		pull_reg, pull_bit, pull_status,	\
		pu_pd_reg, pu_pd_status, debug_status)	\
{							\
	.name =	 desc,					\
	.debug = debug_status,				\
	MUX_REG(mux_reg, mode_offset, mode)		\
	PULL_REG(pull_reg, pull_bit, pull_status)	\
	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
},

#define PULL_DISABLED	0
#define PULL_ENABLED	1

#define PULL_DOWN	0
#define PULL_UP		1

typedef struct {
	char *name;
	unsigned char busy;
	unsigned char debug;

	const char *mux_reg_name;
	const unsigned int mux_reg;
	const unsigned char mask_offset;
	const unsigned char mask;

	const char *pull_name;
	const unsigned int pull_reg;
	const unsigned char pull_val;
	const unsigned char pull_bit;

	const char *pu_pd_name;
	const unsigned int pu_pd_reg;
	const unsigned char pu_pd_val;
} reg_cfg_set;

/*
 * Lookup table for FUNC_MUX and PULL_DWN register combinations for each
 * device. See also reg_cfg_table below for the register values.
 */
typedef enum {
	/* UART1 (BT_UART_GATING)*/
	UART1_TX = 0,
	UART1_RTS,

	/* UART2 (COM_UART_GATING)*/
	UART2_TX,
	UART2_RX,
	UART2_CTS,
	UART2_RTS,

	/* UART3 (GIGA_UART_GATING) */
	UART3_TX,
	UART3_RX,
	UART3_CTS,
	UART3_RTS,
	UART3_CLKREQ,
	UART3_BCLK,	/* 12MHz clock out */
	Y15_1610_UART3_RTS,

	/* PWT & PWL */
	PWT,
	PWL,

	/* USB master generic */
	R18_USB_VBUS,
	R18_1510_USB_GPIO0,
	W4_USB_PUEN,
	W4_USB_CLKO,
	W4_USB_HIGHZ,
	W4_GPIO58,

	/* USB1 master */
	USB1_SUSP,
	USB1_SEO,
	W13_1610_USB1_SE0,
	USB1_TXEN,
	USB1_TXD,
	USB1_VP,
	USB1_VM,
	USB1_RCV,
	USB1_SPEED,
	R13_1610_USB1_SPEED,
	R13_1710_USB1_SE0,

	/* USB2 master */
	USB2_SUSP,
	USB2_VP,
	USB2_TXEN,
	USB2_VM,
	USB2_RCV,
	USB2_SEO,
	USB2_TXD,

	/* OMAP-1510 GPIO */
	R18_1510_GPIO0,
	R19_1510_GPIO1,
	M14_1510_GPIO2,

	/* OMAP1610 GPIO */
	P18_1610_GPIO3,
	Y15_1610_GPIO17,

	/* OMAP-1710 GPIO */
	R18_1710_GPIO0,
	V2_1710_GPIO10,
	N21_1710_GPIO14,
	W15_1710_GPIO40,

	/* MPUIO */
	MPUIO2,
	N15_1610_MPUIO2,
	MPUIO4,
	MPUIO5,
	T20_1610_MPUIO5,
	W11_1610_MPUIO6,
	V10_1610_MPUIO7,
	W11_1610_MPUIO9,
	V10_1610_MPUIO10,
	W10_1610_MPUIO11,
	E20_1610_MPUIO13,
	U20_1610_MPUIO14,
	E19_1610_MPUIO15,

	/* MCBSP2 */
	MCBSP2_CLKR,
	MCBSP2_CLKX,
	MCBSP2_DR,
	MCBSP2_DX,
	MCBSP2_FSR,
	MCBSP2_FSX,

	/* MCBSP3 */
	MCBSP3_CLKX,

	/* Misc ballouts */
	BALLOUT_V8_ARMIO3,
	N20_HDQ,

	/* OMAP-1610 MMC2 */
	W8_1610_MMC2_DAT0,
	V8_1610_MMC2_DAT1,
	W15_1610_MMC2_DAT2,
	R10_1610_MMC2_DAT3,
	Y10_1610_MMC2_CLK,
	Y8_1610_MMC2_CMD,
	V9_1610_MMC2_CMDDIR,
	V5_1610_MMC2_DATDIR0,
	W19_1610_MMC2_DATDIR1,
	R18_1610_MMC2_CLKIN,

	/* OMAP-1610 External Trace Interface */
	M19_1610_ETM_PSTAT0,
	L15_1610_ETM_PSTAT1,
	L18_1610_ETM_PSTAT2,
	L19_1610_ETM_D0,
	J19_1610_ETM_D6,
	J18_1610_ETM_D7,

	/* OMAP16XX GPIO */
	P20_1610_GPIO4,
	V9_1610_GPIO7,
	W8_1610_GPIO9,
	N20_1610_GPIO11,
	N19_1610_GPIO13,
	P10_1610_GPIO22,
	V5_1610_GPIO24,
	AA20_1610_GPIO_41,
	W19_1610_GPIO48,
	M7_1610_GPIO62,
	V14_16XX_GPIO37,
	R9_16XX_GPIO18,
	L14_16XX_GPIO49,

	/* OMAP-1610 uWire */
	V19_1610_UWIRE_SCLK,
	U18_1610_UWIRE_SDI,
	W21_1610_UWIRE_SDO,
	N14_1610_UWIRE_CS0,
	P15_1610_UWIRE_CS3,
	N15_1610_UWIRE_CS1,

	/* OMAP-1610 Flash */
	L3_1610_FLASH_CS2B_OE,
	M8_1610_FLASH_CS2B_WE,

	/* First MMC */
	MMC_CMD,
	MMC_DAT1,
	MMC_DAT2,
	MMC_DAT0,
	MMC_CLK,
	MMC_DAT3,

	/* OMAP-1710 MMC CMDDIR and DATDIR0 */
	M15_1710_MMC_CLKI,
	P19_1710_MMC_CMDDIR,
	P20_1710_MMC_DATDIR0,

	/* OMAP-1610 USB0 alternate pin configuration */
	W9_USB0_TXEN,
	AA9_USB0_VP,
	Y5_USB0_RCV,
	R9_USB0_VM,
	V6_USB0_TXD,
	W5_USB0_SE0,
	V9_USB0_SPEED,
	V9_USB0_SUSP,

	/* USB2 */
	W9_USB2_TXEN,
	AA9_USB2_VP,
	Y5_USB2_RCV,
	R9_USB2_VM,
	V6_USB2_TXD,
	W5_USB2_SE0,

	/* 16XX UART */
	R13_1610_UART1_TX,
	V14_16XX_UART1_RX,
	R14_1610_UART1_CTS,
	AA15_1610_UART1_RTS,
	R9_16XX_UART2_RX,
	L14_16XX_UART3_RX,

	/* I2C OMAP-1610 */
	I2C_SCL,
	I2C_SDA,

	/* Keypad */
	F18_1610_KBC0,
	D20_1610_KBC1,
	D19_1610_KBC2,
	E18_1610_KBC3,
	C21_1610_KBC4,
	G18_1610_KBR0,
	F19_1610_KBR1,
	H14_1610_KBR2,
	E20_1610_KBR3,
	E19_1610_KBR4,
	N19_1610_KBR5,

	/* Power management */
	T20_1610_LOW_PWR,

	/* MCLK Settings */
	V5_1710_MCLK_ON,
	V5_1710_MCLK_OFF,
	R10_1610_MCLK_ON,
	R10_1610_MCLK_OFF,

	/* CompactFlash controller */
	P11_1610_CF_CD2,
	R11_1610_CF_IOIS16,
	V10_1610_CF_IREQ,
	W10_1610_CF_RESET,
	W11_1610_CF_CD1,
} reg_cfg_t;

#if defined(__MUX_C__) && defined(CONFIG_OMAP_MUX)

/*
 * Table of various FUNC_MUX and PULL_DWN combinations for each device.
 * See also reg_cfg_t above for the lookup table.
 */
static const reg_cfg_set __initdata_or_module
reg_cfg_table[] = {
/*
 *	 description		mux  mode   mux	 pull pull  pull  pu_pd	 pu  dbg
 *				reg  offset mode reg  bit   ena	  reg
 */
MUX_CFG("UART1_TX",		 9,   21,    1,	  2,   3,   0,	 NA,	 0,  0)
MUX_CFG("UART1_RTS",		 9,   12,    1,	  2,   0,   0,	 NA,	 0,  0)

/* UART2 (COM_UART_GATING), conflicts with USB2 */
MUX_CFG("UART2_TX",		 C,   27,    1,	  3,   3,   0,	 NA,	 0,  0)
MUX_CFG("UART2_RX",		 C,   18,    0,	  3,   1,   1,	 NA,	 0,  0)
MUX_CFG("UART2_CTS",		 C,   21,    0,	  3,   1,   1,	 NA,	 0,  0)
MUX_CFG("UART2_RTS",		 C,   24,    1,	  3,   2,   0,	 NA,	 0,  0)

/* UART3 (GIGA_UART_GATING) */
MUX_CFG("UART3_TX",		 6,    0,    1,	  0,  30,   0,	 NA,	 0,  0)
MUX_CFG("UART3_RX",		 6,    3,    0,	  0,  31,   1,	 NA,	 0,  0)
MUX_CFG("UART3_CTS",		 5,   12,    2,	  0,  24,   0,	 NA,	 0,  0)
MUX_CFG("UART3_RTS",		 5,   15,    2,	  0,  25,   0,	 NA,	 0,  0)
MUX_CFG("UART3_CLKREQ",		 9,   27,    0,	  2,   5,   0,	 NA,	 0,  0)
MUX_CFG("UART3_BCLK",		 A,    0,    0,	  2,   6,   0,	 NA,	 0,  0)
MUX_CFG("Y15_1610_UART3_RTS",	 A,    0,    1,	  2,   6,   0,	 NA,	 0,  0)

/* PWT & PWL, conflicts with UART3 */
MUX_CFG("PWT",		 	 6,    0,    2,	  0,  30,   0,	 NA,	 0,  0)
MUX_CFG("PWL",		 	 6,    3,    1,	  0,  31,   1,	 NA,	 0,  0)

/* USB internal master generic */
MUX_CFG("R18_USB_VBUS",		 7,    9,    2,	  1,  11,   0,	 NA,	 0,  1)
MUX_CFG("R18_1510_USB_GPIO0",	 7,    9,    0,	  1,  11,   1,	 NA,	 0,  1)
/* works around erratum:  W4_USB_PUEN and W4_USB_PUDIS are switched! */
MUX_CFG("W4_USB_PUEN",		 D,    3,    3,	  3,   5,   1,	 NA,	 0,  1)
MUX_CFG("W4_USB_CLKO",		 D,    3,    1,	  3,   5,   0,	 NA,	 0,  1)
MUX_CFG("W4_USB_HIGHZ",		 D,    3,    4,	  3,   5,   0,	  3,	 0,  1)
MUX_CFG("W4_GPIO58",		 D,    3,    7,	  3,   5,   0,	  3,	 0,  1)

/* USB1 master */
MUX_CFG("USB1_SUSP",		 8,   27,    2,	  1,  27,   0,	 NA,	 0,  1)
MUX_CFG("USB1_SE0",		 9,    0,    2,	  1,  28,   0,	 NA,	 0,  1)
MUX_CFG("W13_1610_USB1_SE0",	 9,    0,    4,	  1,  28,   0,	 NA,	 0,  1)
MUX_CFG("USB1_TXEN",		 9,    3,    2,	  1,  29,   0,	 NA,	 0,  1)
MUX_CFG("USB1_TXD",		 9,   24,    1,	  2,   4,   0,	 NA,	 0,  1)
MUX_CFG("USB1_VP",		 A,    3,    1,	  2,   7,   0,	 NA,	 0,  1)
MUX_CFG("USB1_VM",		 A,    6,    1,	  2,   8,   0,	 NA,	 0,  1)
MUX_CFG("USB1_RCV",		 A,    9,    1,	  2,   9,   0,	 NA,	 0,  1)
MUX_CFG("USB1_SPEED",		 A,   12,    2,	  2,  10,   0,	 NA,	 0,  1)
MUX_CFG("R13_1610_USB1_SPEED",	 A,   12,    5,	  2,  10,   0,	 NA,	 0,  1)
MUX_CFG("R13_1710_USB1_SEO",	 A,   12,    5,   2,  10,   0,   NA,     0,  1)

/* USB2 master */
MUX_CFG("USB2_SUSP",		 B,    3,    1,	  2,  17,   0,	 NA,	 0,  1)
MUX_CFG("USB2_VP",		 B,    6,    1,	  2,  18,   0,	 NA,	 0,  1)
MUX_CFG("USB2_TXEN",		 B,    9,    1,	  2,  19,   0,	 NA,	 0,  1)
MUX_CFG("USB2_VM",		 C,   18,    1,	  3,   0,   0,	 NA,	 0,  1)
MUX_CFG("USB2_RCV",		 C,   21,    1,	  3,   1,   0,	 NA,	 0,  1)
MUX_CFG("USB2_SE0",		 C,   24,    2,	  3,   2,   0,	 NA,	 0,  1)
MUX_CFG("USB2_TXD",		 C,   27,    2,	  3,   3,   0,	 NA,	 0,  1)

/* OMAP-1510 GPIO */
MUX_CFG("R18_1510_GPIO0",	 7,    9,    0,   1,  11,   1,    0,     0,  1)
MUX_CFG("R19_1510_GPIO1",	 7,    6,    0,   1,  10,   1,    0,     0,  1)
MUX_CFG("M14_1510_GPIO2",	 7,    3,    0,   1,   9,   1,    0,     0,  1)

/* OMAP1610 GPIO */
MUX_CFG("P18_1610_GPIO3",	 7,    0,    0,   1,   8,   0,   NA,     0,  1)
MUX_CFG("Y15_1610_GPIO17",	 A,    0,    7,   2,   6,   0,   NA,     0,  1)

/* OMAP-1710 GPIO */
MUX_CFG("R18_1710_GPIO0",        7,    9,    0,   1,  11,   1,    1,     1,  1)
MUX_CFG("V2_1710_GPIO10",        F,   27,    1,   4,   3,   1,    4,     1,  1)
MUX_CFG("N21_1710_GPIO14",       6,    9,    0,   1,   1,   1,    1,     1,  1)
MUX_CFG("W15_1710_GPIO40",       9,   27,    7,   2,   5,   1,    2,     1,  1)

/* MPUIO */
MUX_CFG("MPUIO2",		 7,   18,    0,	  1,  14,   1,	 NA,	 0,  1)
MUX_CFG("N15_1610_MPUIO2",	 7,   18,    0,	  1,  14,   1,	  1,	 0,  1)
MUX_CFG("MPUIO4",		 7,   15,    0,	  1,  13,   1,	 NA,	 0,  1)
MUX_CFG("MPUIO5",		 7,   12,    0,	  1,  12,   1,	 NA,	 0,  1)

MUX_CFG("T20_1610_MPUIO5",	 7,   12,    0,	  1,  12,   0,	  3,	 0,  1)
MUX_CFG("W11_1610_MPUIO6",	10,   15,    2,	  3,   8,   0,	  3,	 0,  1)
MUX_CFG("V10_1610_MPUIO7",	 A,   24,    2,	  2,  14,   0,	  2,	 0,  1)
MUX_CFG("W11_1610_MPUIO9",	10,   15,    1,	  3,   8,   0,	  3,	 0,  1)
MUX_CFG("V10_1610_MPUIO10",	 A,   24,    1,	  2,  14,   0,	  2,	 0,  1)
MUX_CFG("W10_1610_MPUIO11",	 A,   18,    2,	  2,  11,   0,	  2,	 0,  1)
MUX_CFG("E20_1610_MPUIO13",	 3,   21,    1,	  0,   7,   0,	  0,	 0,  1)
MUX_CFG("U20_1610_MPUIO14",	 9,    6,    6,	  0,  30,   0,	  0,	 0,  1)
MUX_CFG("E19_1610_MPUIO15",	 3,   18,    1,	  0,   6,   0,	  0,	 0,  1)

/* MCBSP2 */
MUX_CFG("MCBSP2_CLKR",		 C,    6,    0,	  2,  27,   1,	 NA,	 0,  1)
MUX_CFG("MCBSP2_CLKX",		 C,    9,    0,	  2,  29,   1,	 NA,	 0,  1)
MUX_CFG("MCBSP2_DR",		 C,    0,    0,	  2,  26,   1,	 NA,	 0,  1)
MUX_CFG("MCBSP2_DX",		 C,   15,    0,	  2,  31,   1,	 NA,	 0,  1)
MUX_CFG("MCBSP2_FSR",		 C,   12,    0,	  2,  30,   1,	 NA,	 0,  1)
MUX_CFG("MCBSP2_FSX",		 C,    3,    0,	  2,  27,   1,	 NA,	 0,  1)

/* MCBSP3 NOTE: Mode must 1 for clock */
MUX_CFG("MCBSP3_CLKX",		 9,    3,    1,	  1,  29,   0,	 NA,	 0,  1)

/* Misc ballouts */
MUX_CFG("BALLOUT_V8_ARMIO3",	 B,   18,    0,	  2,  25,   1,	 NA,	 0,  1)
MUX_CFG("N20_HDQ",	       6,   18,    1,   1,   4,   0,    1,     4,  0)

/* OMAP-1610 MMC2 */
MUX_CFG("W8_1610_MMC2_DAT0",	 B,   21,    6,	  2,  23,   1,	  2,	 1,  1)
MUX_CFG("V8_1610_MMC2_DAT1",	 B,   27,    6,	  2,  25,   1,	  2,	 1,  1)
MUX_CFG("W15_1610_MMC2_DAT2",	 9,   12,    6,	  2,   5,   1,	  2,	 1,  1)
MUX_CFG("R10_1610_MMC2_DAT3",	 B,   18,    6,	  2,  22,   1,	  2,	 1,  1)
MUX_CFG("Y10_1610_MMC2_CLK",	 B,    3,    6,	  2,  17,   0,	  2,	 0,  1)
MUX_CFG("Y8_1610_MMC2_CMD",	 B,   24,    6,	  2,  24,   1,	  2,	 1,  1)
MUX_CFG("V9_1610_MMC2_CMDDIR",	 B,   12,    6,	  2,  20,   0,	  2,	 1,  1)
MUX_CFG("V5_1610_MMC2_DATDIR0",	 B,   15,    6,	  2,  21,   0,	  2,	 1,  1)
MUX_CFG("W19_1610_MMC2_DATDIR1", 8,   15,    6,	  1,  23,   0,	  1,	 1,  1)
MUX_CFG("R18_1610_MMC2_CLKIN",	 7,    9,    6,	  1,  11,   0,	  1,	11,  1)

/* OMAP-1610 External Trace Interface */
MUX_CFG("M19_1610_ETM_PSTAT0",	 5,   27,    1,	  0,  29,   0,	  0,	 0,  1)
MUX_CFG("L15_1610_ETM_PSTAT1",	 5,   24,    1,	  0,  28,   0,	  0,	 0,  1)
MUX_CFG("L18_1610_ETM_PSTAT2",	 5,   21,    1,	  0,  27,   0,	  0,	 0,  1)
MUX_CFG("L19_1610_ETM_D0",	 5,   18,    1,	  0,  26,   0,	  0,	 0,  1)
MUX_CFG("J19_1610_ETM_D6",	 5,    0,    1,	  0,  20,   0,	  0,	 0,  1)
MUX_CFG("J18_1610_ETM_D7",	 5,   27,    1,	  0,  19,   0,	  0,	 0,  1)

/* OMAP16XX GPIO */
MUX_CFG("P20_1610_GPIO4",	 6,   27,    0,	  1,   7,   0,	  1,	 1,  1)
MUX_CFG("V9_1610_GPIO7",	 B,   12,    1,	  2,  20,   0,	  2,	 1,  1)
MUX_CFG("W8_1610_GPIO9",	 B,   21,    0,	  2,  23,   0,	  2,	 1,  1)
MUX_CFG("N20_1610_GPIO11",       6,   18,    0,   1,   4,   0,    1,     1,  1)
MUX_CFG("N19_1610_GPIO13",	 6,   12,    0,	  1,   2,   0,	  1,	 1,  1)
MUX_CFG("P10_1610_GPIO22",	 C,    0,    7,	  2,  26,   0,	  2,	 1,  1)
MUX_CFG("V5_1610_GPIO24",	 B,   15,    7,	  2,  21,   0,	  2,	 1,  1)
MUX_CFG("AA20_1610_GPIO_41",	 9,    9,    7,	  1,  31,   0,	  1,	 1,  1)
MUX_CFG("W19_1610_GPIO48",	 8,   15,    7,   1,  23,   1,    1,     0,  1)
MUX_CFG("M7_1610_GPIO62",	10,    0,    0,   4,  24,   0,    4,     0,  1)
MUX_CFG("V14_16XX_GPIO37",	 9,   18,    7,	  2,   2,   0,	  2,	 2,  0)
MUX_CFG("R9_16XX_GPIO18",	 C,   18,    7,   3,   0,   0,    3,     0,  0)
MUX_CFG("L14_16XX_GPIO49",	 6,    3,    7,   0,  31,   0,    0,    31,  0)

/* OMAP-1610 uWire */
MUX_CFG("V19_1610_UWIRE_SCLK",	 8,    6,    0,	  1,  20,   0,	  1,	 1,  1)
MUX_CFG("U18_1610_UWIRE_SDI",	 8,    0,    0,	  1,  18,   0,	  1,	 1,  1)
MUX_CFG("W21_1610_UWIRE_SDO",	 8,    3,    0,	  1,  19,   0,	  1,	 1,  1)
MUX_CFG("N14_1610_UWIRE_CS0",	 8,    9,    1,	  1,  21,   0,	  1,	 1,  1)
MUX_CFG("P15_1610_UWIRE_CS3",	 8,   12,    1,	  1,  22,   0,	  1,	 1,  1)
MUX_CFG("N15_1610_UWIRE_CS1",	 7,   18,    2,	  1,  14,   0,	 NA,	 0,  1)

/* OMAP-1610 Flash */
MUX_CFG("L3_1610_FLASH_CS2B_OE",10,    6,    1,	 NA,   0,   0,	 NA,	 0,  1)
MUX_CFG("M8_1610_FLASH_CS2B_WE",10,    3,    1,	 NA,   0,   0,	 NA,	 0,  1)

/* First MMC interface, same on 1510, 1610 and 1710 */
MUX_CFG("MMC_CMD",		 A,   27,    0,	  2,  15,   1,	  2,	 1,  1)
MUX_CFG("MMC_DAT1",		 A,   24,    0,	  2,  14,   1,	  2,	 1,  1)
MUX_CFG("MMC_DAT2",		 A,   18,    0,	  2,  12,   1,	  2,	 1,  1)
MUX_CFG("MMC_DAT0",		 B,    0,    0,	  2,  16,   1,	  2,	 1,  1)
MUX_CFG("MMC_CLK",		 A,   21,    0,	 NA,   0,   0,	 NA,	 0,  1)
MUX_CFG("MMC_DAT3",		10,   15,    0,	  3,   8,   1,	  3,	 1,  1)
MUX_CFG("M15_1710_MMC_CLKI",	 6,   21,    2,   0,   0,   0,   NA,     0,  1)
MUX_CFG("P19_1710_MMC_CMDDIR",	 6,   24,    6,   0,   0,   0,   NA,     0,  1)
MUX_CFG("P20_1710_MMC_DATDIR0",	 6,   27,    5,   0,   0,   0,   NA,     0,  1)

/* OMAP-1610 USB0 alternate configuration */
MUX_CFG("W9_USB0_TXEN",		 B,   9,     5,	  2,  19,   0,	  2,	 0,  1)
MUX_CFG("AA9_USB0_VP",		 B,   6,     5,	  2,  18,   0,	  2,	 0,  1)
MUX_CFG("Y5_USB0_RCV",		 C,  21,     5,	  3,   1,   0,	  1,	 0,  1)
MUX_CFG("R9_USB0_VM",		 C,  18,     5,	  3,   0,   0,	  3,	 0,  1)
MUX_CFG("V6_USB0_TXD",		 C,  27,     5,	  3,   3,   0,	  3,	 0,  1)
MUX_CFG("W5_USB0_SE0",		 C,  24,     5,	  3,   2,   0,	  3,	 0,  1)
MUX_CFG("V9_USB0_SPEED",	 B,  12,     5,	  2,  20,   0,	  2,	 0,  1)
MUX_CFG("Y10_USB0_SUSP",	 B,   3,     5,	  2,  17,   0,	  2,	 0,  1)

/* USB2 interface */
MUX_CFG("W9_USB2_TXEN",		 B,   9,     1,	 NA,   0,   0,	 NA,	 0,  1)
MUX_CFG("AA9_USB2_VP",		 B,   6,     1,	 NA,   0,   0,	 NA,	 0,  1)
MUX_CFG("Y5_USB2_RCV",		 C,  21,     1,	 NA,   0,   0,	 NA,	 0,  1)
MUX_CFG("R9_USB2_VM",		 C,  18,     1,	 NA,   0,   0,	 NA,	 0,  1)
MUX_CFG("V6_USB2_TXD",		 C,  27,     2,	 NA,   0,   0,	 NA,	 0,  1)
MUX_CFG("W5_USB2_SE0",		 C,  24,     2,	 NA,   0,   0,	 NA,	 0,  1)

/* 16XX UART */
MUX_CFG("R13_1610_UART1_TX",	 A,  12,     6,	  2,  10,   0,	  2,	10,  1)
MUX_CFG("V14_16XX_UART1_RX",	 9,  18,     0,	  2,   2,   0,	  2,	 2,  1)
MUX_CFG("R14_1610_UART1_CTS",	 9,  15,     0,	  2,   1,   0,	  2,	 1,  1)
MUX_CFG("AA15_1610_UART1_RTS",	 9,  12,     1,	  2,   0,   0,	  2,	 0,  1)
MUX_CFG("R9_16XX_UART2_RX",	 C,  18,     0,   3,   0,   0,    3,     0,  1)
MUX_CFG("L14_16XX_UART3_RX",	 6,   3,     0,   0,  31,   0,    0,    31,  1)

/* I2C interface */
MUX_CFG("I2C_SCL",		 7,  24,     0,	 NA,   0,   0,	 NA,	 0,  0)
MUX_CFG("I2C_SDA",		 7,  27,     0,	 NA,   0,   0,	 NA,	 0,  0)

/* Keypad */
MUX_CFG("F18_1610_KBC0",	 3,  15,     0,	  0,   5,   1,	  0,	 0,  0)
MUX_CFG("D20_1610_KBC1",	 3,  12,     0,	  0,   4,   1,	  0,	 0,  0)
MUX_CFG("D19_1610_KBC2",	 3,   9,     0,	  0,   3,   1,	  0,	 0,  0)
MUX_CFG("E18_1610_KBC3",	 3,   6,     0,	  0,   2,   1,	  0,	 0,  0)
MUX_CFG("C21_1610_KBC4",	 3,   3,     0,	  0,   1,   1,	  0,	 0,  0)
MUX_CFG("G18_1610_KBR0",	 4,   0,     0,	  0,   10,  1,	  0,	 1,  0)
MUX_CFG("F19_1610_KBR1",	 3,   27,    0,	  0,   9,   1,	  0,	 1,  0)
MUX_CFG("H14_1610_KBR2",	 3,   24,    0,	  0,   8,   1,	  0,	 1,  0)
MUX_CFG("E20_1610_KBR3",	 3,   21,    0,	  0,   7,   1,	  0,	 1,  0)
MUX_CFG("E19_1610_KBR4",	 3,   18,    0,	  0,   6,   1,	  0,	 1,  0)
MUX_CFG("N19_1610_KBR5",	 6,  12,     1,	  1,   2,   1,	  1,	 1,  0)

/* Power management */
MUX_CFG("T20_1610_LOW_PWR",	 7,   12,    1,	  NA,   0,   0,   NA,	 0,  0)

/* MCLK Settings */
MUX_CFG("V5_1710_MCLK_ON",	 B,   15,    0,	  NA,   0,   0,   NA,	 0,  0)
MUX_CFG("V5_1710_MCLK_OFF",	 B,   15,    6,	  NA,   0,   0,   NA,	 0,  0)
MUX_CFG("R10_1610_MCLK_ON",	 B,   18,    0,	  NA,  22,   0,	  NA,	 1,  0)
MUX_CFG("R10_1610_MCLK_OFF",	 B,   18,    6,	  2,   22,   1,	  2,	 1,  1)

/* CompactFlash controller, conflicts with MMC1 */
MUX_CFG("P11_1610_CF_CD2",	 A,   27,    3,	  2,   15,   1,	  2,	 1,  1)
MUX_CFG("R11_1610_CF_IOIS16",	 B,    0,    3,	  2,   16,   1,	  2,	 1,  1)
MUX_CFG("V10_1610_CF_IREQ",	 A,   24,    3,	  2,   14,   0,	  2,	 0,  1)
MUX_CFG("W10_1610_CF_RESET",	 A,   18,    3,	  2,   12,   1,	  2,	 1,  1)
MUX_CFG("W11_1610_CF_CD1",	10,   15,    3,	  3,    8,   1,	  3,	 1,  1)
};

#endif	/* __MUX_C__ */

#ifdef	CONFIG_OMAP_MUX
/* setup pin muxing in Linux */
extern int omap_cfg_reg(reg_cfg_t reg_cfg);
#else
/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
static inline int omap_cfg_reg(reg_cfg_t reg_cfg) { return 0; }
#endif

#endif