| Patrick Boettcher | bc2e391 | 2006-12-02 21:16:04 -0200 | [diff] [blame] | 1 | /* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones | 
 | 2 |  * (e.g. Pinnacle 400e DVB-S USB2.0). | 
 | 3 |  * | 
 | 4 |  * Copyright (c) 2002 Holger Waechtler <holger@convergence.de> | 
 | 5 |  * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net> | 
 | 6 |  * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.de> | 
 | 7 |  * | 
 | 8 |  *	This program is free software; you can redistribute it and/or modify it | 
 | 9 |  *	under the terms of the GNU General Public License as published by the Free | 
 | 10 |  *	Software Foundation, version 2. | 
 | 11 |  * | 
 | 12 |  * see Documentation/dvb/README.dvb-usb for more information | 
 | 13 |  */ | 
 | 14 | #ifndef _DVB_USB_TTUSB2_H_ | 
 | 15 | #define _DVB_USB_TTUSB2_H_ | 
 | 16 |  | 
 | 17 | /* TTUSB protocol | 
 | 18 |  * | 
 | 19 |  * always to messages (out/in) | 
 | 20 |  * out message: | 
 | 21 |  * 0xaa <id> <cmdbyte> <datalen> <data...> | 
 | 22 |  * | 
 | 23 |  * in message (complete block is always 0x40 bytes long) | 
 | 24 |  * 0x55 <id> <cmdbyte> <datalen> <data...> | 
 | 25 |  * | 
 | 26 |  * id is incremented for each transaction | 
 | 27 |  */ | 
 | 28 |  | 
 | 29 | #define CMD_DSP_DOWNLOAD    0x13 | 
 | 30 | /* out data: <byte>[28] | 
 | 31 |  * last block must be empty */ | 
 | 32 |  | 
 | 33 | #define CMD_DSP_BOOT        0x14 | 
 | 34 | /* out data: nothing */ | 
 | 35 |  | 
 | 36 | #define CMD_POWER           0x15 | 
 | 37 | /* out data: <on=1/off=0> */ | 
 | 38 |  | 
 | 39 | #define CMD_LNB             0x16 | 
 | 40 | /* out data: <power=1> <18V=0,13V=1> <tone> <??=1> <??=1> */ | 
 | 41 |  | 
 | 42 | #define CMD_GET_VERSION     0x17 | 
 | 43 | /* in  data: <version_byte>[5] */ | 
 | 44 |  | 
 | 45 | #define CMD_DISEQC          0x18 | 
 | 46 | /* out data: <master=0xff/burst=??> <cmdlen> <cmdbytes>[cmdlen] */ | 
 | 47 |  | 
 | 48 | #define CMD_PID_ENABLE      0x22 | 
 | 49 | /* out data: <index> <type: ts=1/sec=2> <pid msb> <pid lsb> */ | 
 | 50 |  | 
 | 51 | #define CMD_PID_DISABLE     0x23 | 
 | 52 | /* out data: <index> */ | 
 | 53 |  | 
 | 54 | #define CMD_FILTER_ENABLE   0x24 | 
 | 55 | /* out data: <index> <pid_idx> <filter>[12] <mask>[12] */ | 
 | 56 |  | 
 | 57 | #define CMD_FILTER_DISABLE  0x25 | 
 | 58 | /* out data: <index> */ | 
 | 59 |  | 
 | 60 | #define CMD_GET_DSP_VERSION 0x26 | 
 | 61 | /* in  data: <version_byte>[28] */ | 
 | 62 |  | 
 | 63 | #define CMD_I2C_XFER        0x31 | 
 | 64 | /* out data: <addr << 1> <sndlen> <rcvlen> <data>[sndlen] | 
 | 65 |  * in  data: <addr << 1> <sndlen> <rcvlen> <data>[rcvlen] */ | 
 | 66 |  | 
 | 67 | #define CMD_I2C_BITRATE     0x32 | 
 | 68 | /* out data: <default=0> */ | 
 | 69 |  | 
 | 70 | #endif |