arch/arm/mach-msm/gdsc.c

/*
 * Copyright (c) 2012, Code Aurora Forum. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>

#define PWR_ON_MASK		BIT(31)
#define EN_REST_WAIT_MASK	(0xF << 20)
#define EN_FEW_WAIT_MASK	(0xF << 16)
#define CLK_DIS_WAIT_MASK	(0xF << 12)
#define SW_OVERRIDE_MASK	BIT(2)
#define HW_CONTROL_MASK		BIT(1)
#define SW_COLLAPSE_MASK	BIT(0)

/* Wait 2^n CXO cycles between all states. Here, n=2 (4 cycles). */
#define EN_REST_WAIT_VAL	(0x2 << 20)
#define EN_FEW_WAIT_VAL		(0x2 << 16)
#define CLK_DIS_WAIT_VAL	(0x2 << 12)

#define TIMEOUT_US		10

struct gdsc {
	struct regulator_dev	*rdev;
	struct regulator_desc	rdesc;
	void __iomem		*gdscr;
};

static int gdsc_is_enabled(struct regulator_dev *rdev)
{
	struct gdsc *sc = rdev_get_drvdata(rdev);

	return !!(readl_relaxed(sc->gdscr) & PWR_ON_MASK);
}

static int gdsc_enable(struct regulator_dev *rdev)
{
	struct gdsc *sc = rdev_get_drvdata(rdev);
	uint32_t regval;
	int ret;

	regval = readl_relaxed(sc->gdscr);
	regval &= ~SW_COLLAPSE_MASK;
	writel_relaxed(regval, sc->gdscr);

	ret = readl_tight_poll_timeout(sc->gdscr, regval, regval & PWR_ON_MASK,
				       TIMEOUT_US);
	if (ret)
		dev_err(&rdev->dev, "%s enable timed out\n", sc->rdesc.name);

	return ret;
}

static int gdsc_disable(struct regulator_dev *rdev)
{
	struct gdsc *sc = rdev_get_drvdata(rdev);
	uint32_t regval;
	int ret;

	regval = readl_relaxed(sc->gdscr);
	regval |= SW_COLLAPSE_MASK;
	writel_relaxed(regval, sc->gdscr);

	ret = readl_tight_poll_timeout(sc->gdscr, regval,
				       !(regval & PWR_ON_MASK), TIMEOUT_US);
	if (ret)
		dev_err(&rdev->dev, "%s disable timed out\n", sc->rdesc.name);

	return ret;
}

static struct regulator_ops gdsc_ops = {
	.is_enabled = gdsc_is_enabled,
	.enable = gdsc_enable,
	.disable = gdsc_disable,
};

static int __devinit gdsc_probe(struct platform_device *pdev)
{
	static atomic_t gdsc_count = ATOMIC_INIT(-1);
	struct regulator_init_data *init_data;
	struct resource *res;
	struct gdsc *sc;
	uint32_t regval;
	int ret;

	sc = devm_kzalloc(&pdev->dev, sizeof(struct gdsc), GFP_KERNEL);
	if (sc == NULL)
		return -ENOMEM;

	init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
	if (init_data == NULL)
		return -ENOMEM;

	if (of_get_property(pdev->dev.of_node, "parent-supply", NULL))
		init_data->supply_regulator = "parent";

	ret = of_property_read_string(pdev->dev.of_node, "regulator-name",
				      &sc->rdesc.name);
	if (ret)
		return ret;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (res == NULL)
		return -EINVAL;
	sc->gdscr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
	if (sc->gdscr == NULL)
		return -ENOMEM;

	sc->rdesc.id = atomic_inc_return(&gdsc_count);
	sc->rdesc.ops = &gdsc_ops;
	sc->rdesc.type = REGULATOR_VOLTAGE;
	sc->rdesc.owner = THIS_MODULE;
	platform_set_drvdata(pdev, sc);

	/*
	 * Disable HW trigger: collapse/restore occur based on registers writes.
	 * Disable SW override: Use hardware state-machine for sequencing.
	 */
	regval = readl_relaxed(sc->gdscr);
	regval &= ~(HW_CONTROL_MASK | SW_OVERRIDE_MASK);

	/* Configure wait time between states. */
	regval &= ~(EN_REST_WAIT_MASK | EN_FEW_WAIT_MASK | CLK_DIS_WAIT_MASK);
	regval |= EN_REST_WAIT_VAL | EN_FEW_WAIT_VAL | CLK_DIS_WAIT_VAL;
	writel_relaxed(regval, sc->gdscr);

	sc->rdev = regulator_register(&sc->rdesc, &pdev->dev, init_data, sc,
				      pdev->dev.of_node);
	if (IS_ERR(sc->rdev)) {
		dev_err(&pdev->dev, "regulator_register(\"%s\") failed.\n",
			sc->rdesc.name);
		return PTR_ERR(sc->rdev);
	}

	return 0;
}

static int __devexit gdsc_remove(struct platform_device *pdev)
{
	struct gdsc *sc = platform_get_drvdata(pdev);
	regulator_unregister(sc->rdev);
	return 0;
}

static struct of_device_id gdsc_match_table[] = {
	{ .compatible = "qcom,gdsc" },
	{}
};

static struct platform_driver gdsc_driver = {
	.probe		= gdsc_probe,
	.remove		= __devexit_p(gdsc_remove),
	.driver		= {
		.name		= "gdsc",
		.of_match_table = gdsc_match_table,
		.owner		= THIS_MODULE,
	},
};

static int __init gdsc_init(void)
{
	return platform_driver_register(&gdsc_driver);
}
subsys_initcall(gdsc_init);

static void __exit gdsc_exit(void)
{
	platform_driver_unregister(&gdsc_driver);
}
module_exit(gdsc_exit);

MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Copper GDSC power rail regulator driver");