blob: 0f40de2a33ded1bc1cffed03c0eca44259499a2a [file] [log] [blame]
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001/*
2 * Disk Array driver for HP Smart Array SAS controllers
3 * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P.
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; version 2 of the License.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
12 * NON INFRINGEMENT. See the GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17 *
18 * Questions/Comments/Bugfixes to iss_storagedev@hp.com
19 *
20 */
21
22#include <linux/module.h>
23#include <linux/interrupt.h>
24#include <linux/types.h>
25#include <linux/pci.h>
26#include <linux/kernel.h>
27#include <linux/slab.h>
28#include <linux/delay.h>
29#include <linux/fs.h>
30#include <linux/timer.h>
31#include <linux/seq_file.h>
32#include <linux/init.h>
33#include <linux/spinlock.h>
Stephen M. Cameronedd16362009-12-08 14:09:11 -080034#include <linux/compat.h>
35#include <linux/blktrace_api.h>
36#include <linux/uaccess.h>
37#include <linux/io.h>
38#include <linux/dma-mapping.h>
39#include <linux/completion.h>
40#include <linux/moduleparam.h>
41#include <scsi/scsi.h>
42#include <scsi/scsi_cmnd.h>
43#include <scsi/scsi_device.h>
44#include <scsi/scsi_host.h>
Stephen M. Cameron667e23d2010-02-25 14:02:51 -060045#include <scsi/scsi_tcq.h>
Stephen M. Cameronedd16362009-12-08 14:09:11 -080046#include <linux/cciss_ioctl.h>
47#include <linux/string.h>
48#include <linux/bitmap.h>
49#include <asm/atomic.h>
50#include <linux/kthread.h>
51#include "hpsa_cmd.h"
52#include "hpsa.h"
53
54/* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' */
Mike Miller31468402010-02-25 14:03:12 -060055#define HPSA_DRIVER_VERSION "2.0.2-1"
Stephen M. Cameronedd16362009-12-08 14:09:11 -080056#define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")"
57
58/* How long to wait (in milliseconds) for board to go into simple mode */
59#define MAX_CONFIG_WAIT 30000
60#define MAX_IOCTL_CONFIG_WAIT 1000
61
62/*define how many times we will try a command because of bus resets */
63#define MAX_CMD_RETRIES 3
64
65/* Embedded module documentation macros - see modules.h */
66MODULE_AUTHOR("Hewlett-Packard Company");
67MODULE_DESCRIPTION("Driver for HP Smart Array Controller version " \
68 HPSA_DRIVER_VERSION);
69MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers");
70MODULE_VERSION(HPSA_DRIVER_VERSION);
71MODULE_LICENSE("GPL");
72
73static int hpsa_allow_any;
74module_param(hpsa_allow_any, int, S_IRUGO|S_IWUSR);
75MODULE_PARM_DESC(hpsa_allow_any,
76 "Allow hpsa driver to access unknown HP Smart Array hardware");
Stephen M. Cameron02ec19c2011-01-06 14:48:29 -060077static int hpsa_simple_mode;
78module_param(hpsa_simple_mode, int, S_IRUGO|S_IWUSR);
79MODULE_PARM_DESC(hpsa_simple_mode,
80 "Use 'simple mode' rather than 'performant mode'");
Stephen M. Cameronedd16362009-12-08 14:09:11 -080081
82/* define the PCI info for the cards we can control */
83static const struct pci_device_id hpsa_pci_device_id[] = {
Stephen M. Cameronedd16362009-12-08 14:09:11 -080084 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241},
85 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243},
86 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245},
87 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247},
88 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
89 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324a},
90 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324b},
Mike Millerf8b01eb2010-02-04 08:42:45 -060091 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3233},
Stephen M. Cameron2e931f32010-06-16 13:51:15 -050092 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3250},
93 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3251},
94 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3252},
95 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3253},
96 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3254},
Mike Miller7c03b872010-12-01 11:16:07 -060097 {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
Stephen M. Cameron6798cc02010-06-16 13:51:20 -050098 PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
Stephen M. Cameronedd16362009-12-08 14:09:11 -080099 {0,}
100};
101
102MODULE_DEVICE_TABLE(pci, hpsa_pci_device_id);
103
104/* board_id = Subsystem Device ID & Vendor ID
105 * product = Marketing Name for the board
106 * access = Address of the struct of function pointers
107 */
108static struct board_type products[] = {
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800109 {0x3241103C, "Smart Array P212", &SA5_access},
110 {0x3243103C, "Smart Array P410", &SA5_access},
111 {0x3245103C, "Smart Array P410i", &SA5_access},
112 {0x3247103C, "Smart Array P411", &SA5_access},
113 {0x3249103C, "Smart Array P812", &SA5_access},
114 {0x324a103C, "Smart Array P712m", &SA5_access},
115 {0x324b103C, "Smart Array P711m", &SA5_access},
Stephen M. Cameron2e931f32010-06-16 13:51:15 -0500116 {0x3250103C, "Smart Array", &SA5_access},
117 {0x3250113C, "Smart Array", &SA5_access},
118 {0x3250123C, "Smart Array", &SA5_access},
119 {0x3250133C, "Smart Array", &SA5_access},
120 {0x3250143C, "Smart Array", &SA5_access},
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800121 {0xFFFF103C, "Unknown Smart Array", &SA5_access},
122};
123
124static int number_of_controllers;
125
Stephen M. Cameron10f66012010-06-16 13:51:50 -0500126static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id);
127static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id);
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800128static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg);
129static void start_io(struct ctlr_info *h);
130
131#ifdef CONFIG_COMPAT
132static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg);
133#endif
134
135static void cmd_free(struct ctlr_info *h, struct CommandList *c);
136static void cmd_special_free(struct ctlr_info *h, struct CommandList *c);
137static struct CommandList *cmd_alloc(struct ctlr_info *h);
138static struct CommandList *cmd_special_alloc(struct ctlr_info *h);
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -0600139static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
140 void *buff, size_t size, u8 page_code, unsigned char *scsi3addr,
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800141 int cmd_type);
142
Jeff Garzikf2812332010-11-16 02:10:29 -0500143static int hpsa_scsi_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd);
Stephen M. Camerona08a8472010-02-04 08:43:16 -0600144static void hpsa_scan_start(struct Scsi_Host *);
145static int hpsa_scan_finished(struct Scsi_Host *sh,
146 unsigned long elapsed_time);
Stephen M. Cameron667e23d2010-02-25 14:02:51 -0600147static int hpsa_change_queue_depth(struct scsi_device *sdev,
148 int qdepth, int reason);
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800149
150static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd);
151static int hpsa_slave_alloc(struct scsi_device *sdev);
152static void hpsa_slave_destroy(struct scsi_device *sdev);
153
154static ssize_t raid_level_show(struct device *dev,
155 struct device_attribute *attr, char *buf);
156static ssize_t lunid_show(struct device *dev,
157 struct device_attribute *attr, char *buf);
158static ssize_t unique_id_show(struct device *dev,
159 struct device_attribute *attr, char *buf);
Stephen M. Camerond28ce022010-05-27 15:14:34 -0500160static ssize_t host_show_firmware_revision(struct device *dev,
161 struct device_attribute *attr, char *buf);
Stephen M. Cameron94a13642011-01-06 14:48:39 -0600162static ssize_t host_show_commands_outstanding(struct device *dev,
163 struct device_attribute *attr, char *buf);
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800164static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno);
165static ssize_t host_store_rescan(struct device *dev,
166 struct device_attribute *attr, const char *buf, size_t count);
167static int check_for_unit_attention(struct ctlr_info *h,
168 struct CommandList *c);
169static void check_ioctl_unit_attention(struct ctlr_info *h,
170 struct CommandList *c);
Don Brace303932f2010-02-04 08:42:40 -0600171/* performant mode helper functions */
172static void calc_bucket_map(int *bucket, int num_buckets,
173 int nsgs, int *bucket_map);
Stephen M. Cameron7136f9a2010-05-27 15:14:03 -0500174static __devinit void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h);
Don Brace303932f2010-02-04 08:42:40 -0600175static inline u32 next_command(struct ctlr_info *h);
Stephen M. Cameron1df85522010-06-16 13:51:40 -0500176static int __devinit hpsa_find_cfg_addrs(struct pci_dev *pdev,
177 void __iomem *vaddr, u32 *cfg_base_addr, u64 *cfg_base_addr_index,
178 u64 *cfg_offset);
179static int __devinit hpsa_pci_find_memory_BAR(struct pci_dev *pdev,
180 unsigned long *memory_bar);
Stephen M. Cameron18867652010-06-16 13:51:45 -0500181static int __devinit hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id);
Stephen M. Cameronfe5389c2011-01-06 14:48:03 -0600182static int __devinit hpsa_wait_for_board_state(struct pci_dev *pdev,
183 void __iomem *vaddr, int wait_for_ready);
184#define BOARD_NOT_READY 0
185#define BOARD_READY 1
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800186
187static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL);
188static DEVICE_ATTR(lunid, S_IRUGO, lunid_show, NULL);
189static DEVICE_ATTR(unique_id, S_IRUGO, unique_id_show, NULL);
190static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
Stephen M. Camerond28ce022010-05-27 15:14:34 -0500191static DEVICE_ATTR(firmware_revision, S_IRUGO,
192 host_show_firmware_revision, NULL);
Stephen M. Cameron94a13642011-01-06 14:48:39 -0600193static DEVICE_ATTR(commands_outstanding, S_IRUGO,
194 host_show_commands_outstanding, NULL);
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800195
196static struct device_attribute *hpsa_sdev_attrs[] = {
197 &dev_attr_raid_level,
198 &dev_attr_lunid,
199 &dev_attr_unique_id,
200 NULL,
201};
202
203static struct device_attribute *hpsa_shost_attrs[] = {
204 &dev_attr_rescan,
Stephen M. Camerond28ce022010-05-27 15:14:34 -0500205 &dev_attr_firmware_revision,
Stephen M. Cameron94a13642011-01-06 14:48:39 -0600206 &dev_attr_commands_outstanding,
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800207 NULL,
208};
209
210static struct scsi_host_template hpsa_driver_template = {
211 .module = THIS_MODULE,
212 .name = "hpsa",
213 .proc_name = "hpsa",
214 .queuecommand = hpsa_scsi_queue_command,
Stephen M. Camerona08a8472010-02-04 08:43:16 -0600215 .scan_start = hpsa_scan_start,
216 .scan_finished = hpsa_scan_finished,
Stephen M. Cameron667e23d2010-02-25 14:02:51 -0600217 .change_queue_depth = hpsa_change_queue_depth,
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800218 .this_id = -1,
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800219 .use_clustering = ENABLE_CLUSTERING,
220 .eh_device_reset_handler = hpsa_eh_device_reset_handler,
221 .ioctl = hpsa_ioctl,
222 .slave_alloc = hpsa_slave_alloc,
223 .slave_destroy = hpsa_slave_destroy,
224#ifdef CONFIG_COMPAT
225 .compat_ioctl = hpsa_compat_ioctl,
226#endif
227 .sdev_attrs = hpsa_sdev_attrs,
228 .shost_attrs = hpsa_shost_attrs,
229};
230
231static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev)
232{
233 unsigned long *priv = shost_priv(sdev->host);
234 return (struct ctlr_info *) *priv;
235}
236
Stephen M. Camerona23513e2010-02-04 08:43:11 -0600237static inline struct ctlr_info *shost_to_hba(struct Scsi_Host *sh)
238{
239 unsigned long *priv = shost_priv(sh);
240 return (struct ctlr_info *) *priv;
241}
242
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800243static int check_for_unit_attention(struct ctlr_info *h,
244 struct CommandList *c)
245{
246 if (c->err_info->SenseInfo[2] != UNIT_ATTENTION)
247 return 0;
248
249 switch (c->err_info->SenseInfo[12]) {
250 case STATE_CHANGED:
251 dev_warn(&h->pdev->dev, "hpsa%d: a state change "
252 "detected, command retried\n", h->ctlr);
253 break;
254 case LUN_FAILED:
255 dev_warn(&h->pdev->dev, "hpsa%d: LUN failure "
256 "detected, action required\n", h->ctlr);
257 break;
258 case REPORT_LUNS_CHANGED:
259 dev_warn(&h->pdev->dev, "hpsa%d: report LUN data "
Mike Miller31468402010-02-25 14:03:12 -0600260 "changed, action required\n", h->ctlr);
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800261 /*
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800262 * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012.
263 */
264 break;
265 case POWER_OR_RESET:
266 dev_warn(&h->pdev->dev, "hpsa%d: a power on "
267 "or device reset detected\n", h->ctlr);
268 break;
269 case UNIT_ATTENTION_CLEARED:
270 dev_warn(&h->pdev->dev, "hpsa%d: unit attention "
271 "cleared by another initiator\n", h->ctlr);
272 break;
273 default:
274 dev_warn(&h->pdev->dev, "hpsa%d: unknown "
275 "unit attention detected\n", h->ctlr);
276 break;
277 }
278 return 1;
279}
280
281static ssize_t host_store_rescan(struct device *dev,
282 struct device_attribute *attr,
283 const char *buf, size_t count)
284{
285 struct ctlr_info *h;
286 struct Scsi_Host *shost = class_to_shost(dev);
Stephen M. Camerona23513e2010-02-04 08:43:11 -0600287 h = shost_to_hba(shost);
Mike Miller31468402010-02-25 14:03:12 -0600288 hpsa_scan_start(h->scsi_host);
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800289 return count;
290}
291
Stephen M. Camerond28ce022010-05-27 15:14:34 -0500292static ssize_t host_show_firmware_revision(struct device *dev,
293 struct device_attribute *attr, char *buf)
294{
295 struct ctlr_info *h;
296 struct Scsi_Host *shost = class_to_shost(dev);
297 unsigned char *fwrev;
298
299 h = shost_to_hba(shost);
300 if (!h->hba_inquiry_data)
301 return 0;
302 fwrev = &h->hba_inquiry_data[32];
303 return snprintf(buf, 20, "%c%c%c%c\n",
304 fwrev[0], fwrev[1], fwrev[2], fwrev[3]);
305}
306
Stephen M. Cameron94a13642011-01-06 14:48:39 -0600307static ssize_t host_show_commands_outstanding(struct device *dev,
308 struct device_attribute *attr, char *buf)
309{
310 struct Scsi_Host *shost = class_to_shost(dev);
311 struct ctlr_info *h = shost_to_hba(shost);
312
313 return snprintf(buf, 20, "%d\n", h->commands_outstanding);
314}
315
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800316/* Enqueuing and dequeuing functions for cmdlists. */
Stephen M. Cameron9e0fc762011-02-15 15:32:48 -0600317static inline void addQ(struct list_head *list, struct CommandList *c)
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800318{
Stephen M. Cameron9e0fc762011-02-15 15:32:48 -0600319 list_add_tail(&c->list, list);
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800320}
321
Don Brace303932f2010-02-04 08:42:40 -0600322static inline u32 next_command(struct ctlr_info *h)
323{
324 u32 a;
325
326 if (unlikely(h->transMethod != CFGTBL_Trans_Performant))
327 return h->access.command_completed(h);
328
329 if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
330 a = *(h->reply_pool_head); /* Next cmd in ring buffer */
331 (h->reply_pool_head)++;
332 h->commands_outstanding--;
333 } else {
334 a = FIFO_EMPTY;
335 }
336 /* Check for wraparound */
337 if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
338 h->reply_pool_head = h->reply_pool;
339 h->reply_pool_wraparound ^= 1;
340 }
341 return a;
342}
343
344/* set_performant_mode: Modify the tag for cciss performant
345 * set bit 0 for pull model, bits 3-1 for block fetch
346 * register number
347 */
348static void set_performant_mode(struct ctlr_info *h, struct CommandList *c)
349{
350 if (likely(h->transMethod == CFGTBL_Trans_Performant))
351 c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1);
352}
353
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800354static void enqueue_cmd_and_start_io(struct ctlr_info *h,
355 struct CommandList *c)
356{
357 unsigned long flags;
Don Brace303932f2010-02-04 08:42:40 -0600358
359 set_performant_mode(h, c);
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800360 spin_lock_irqsave(&h->lock, flags);
361 addQ(&h->reqQ, c);
362 h->Qdepth++;
363 start_io(h);
364 spin_unlock_irqrestore(&h->lock, flags);
365}
366
367static inline void removeQ(struct CommandList *c)
368{
Stephen M. Cameron9e0fc762011-02-15 15:32:48 -0600369 if (WARN_ON(list_empty(&c->list)))
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800370 return;
Stephen M. Cameron9e0fc762011-02-15 15:32:48 -0600371 list_del_init(&c->list);
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800372}
373
374static inline int is_hba_lunid(unsigned char scsi3addr[])
375{
376 return memcmp(scsi3addr, RAID_CTLR_LUNID, 8) == 0;
377}
378
379static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[])
380{
381 return (scsi3addr[3] & 0xC0) == 0x40;
382}
383
Stephen M. Cameron339b2b12010-02-04 08:42:50 -0600384static inline int is_scsi_rev_5(struct ctlr_info *h)
385{
386 if (!h->hba_inquiry_data)
387 return 0;
388 if ((h->hba_inquiry_data[2] & 0x07) == 5)
389 return 1;
390 return 0;
391}
392
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800393static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
394 "UNKNOWN"
395};
396#define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 1)
397
398static ssize_t raid_level_show(struct device *dev,
399 struct device_attribute *attr, char *buf)
400{
401 ssize_t l = 0;
Stephen M. Cameron82a72c02010-02-04 08:41:38 -0600402 unsigned char rlevel;
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800403 struct ctlr_info *h;
404 struct scsi_device *sdev;
405 struct hpsa_scsi_dev_t *hdev;
406 unsigned long flags;
407
408 sdev = to_scsi_device(dev);
409 h = sdev_to_hba(sdev);
410 spin_lock_irqsave(&h->lock, flags);
411 hdev = sdev->hostdata;
412 if (!hdev) {
413 spin_unlock_irqrestore(&h->lock, flags);
414 return -ENODEV;
415 }
416
417 /* Is this even a logical drive? */
418 if (!is_logical_dev_addr_mode(hdev->scsi3addr)) {
419 spin_unlock_irqrestore(&h->lock, flags);
420 l = snprintf(buf, PAGE_SIZE, "N/A\n");
421 return l;
422 }
423
424 rlevel = hdev->raid_level;
425 spin_unlock_irqrestore(&h->lock, flags);
Stephen M. Cameron82a72c02010-02-04 08:41:38 -0600426 if (rlevel > RAID_UNKNOWN)
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800427 rlevel = RAID_UNKNOWN;
428 l = snprintf(buf, PAGE_SIZE, "RAID %s\n", raid_label[rlevel]);
429 return l;
430}
431
432static ssize_t lunid_show(struct device *dev,
433 struct device_attribute *attr, char *buf)
434{
435 struct ctlr_info *h;
436 struct scsi_device *sdev;
437 struct hpsa_scsi_dev_t *hdev;
438 unsigned long flags;
439 unsigned char lunid[8];
440
441 sdev = to_scsi_device(dev);
442 h = sdev_to_hba(sdev);
443 spin_lock_irqsave(&h->lock, flags);
444 hdev = sdev->hostdata;
445 if (!hdev) {
446 spin_unlock_irqrestore(&h->lock, flags);
447 return -ENODEV;
448 }
449 memcpy(lunid, hdev->scsi3addr, sizeof(lunid));
450 spin_unlock_irqrestore(&h->lock, flags);
451 return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
452 lunid[0], lunid[1], lunid[2], lunid[3],
453 lunid[4], lunid[5], lunid[6], lunid[7]);
454}
455
456static ssize_t unique_id_show(struct device *dev,
457 struct device_attribute *attr, char *buf)
458{
459 struct ctlr_info *h;
460 struct scsi_device *sdev;
461 struct hpsa_scsi_dev_t *hdev;
462 unsigned long flags;
463 unsigned char sn[16];
464
465 sdev = to_scsi_device(dev);
466 h = sdev_to_hba(sdev);
467 spin_lock_irqsave(&h->lock, flags);
468 hdev = sdev->hostdata;
469 if (!hdev) {
470 spin_unlock_irqrestore(&h->lock, flags);
471 return -ENODEV;
472 }
473 memcpy(sn, hdev->device_id, sizeof(sn));
474 spin_unlock_irqrestore(&h->lock, flags);
475 return snprintf(buf, 16 * 2 + 2,
476 "%02X%02X%02X%02X%02X%02X%02X%02X"
477 "%02X%02X%02X%02X%02X%02X%02X%02X\n",
478 sn[0], sn[1], sn[2], sn[3],
479 sn[4], sn[5], sn[6], sn[7],
480 sn[8], sn[9], sn[10], sn[11],
481 sn[12], sn[13], sn[14], sn[15]);
482}
483
484static int hpsa_find_target_lun(struct ctlr_info *h,
485 unsigned char scsi3addr[], int bus, int *target, int *lun)
486{
487 /* finds an unused bus, target, lun for a new physical device
488 * assumes h->devlock is held
489 */
490 int i, found = 0;
491 DECLARE_BITMAP(lun_taken, HPSA_MAX_SCSI_DEVS_PER_HBA);
492
493 memset(&lun_taken[0], 0, HPSA_MAX_SCSI_DEVS_PER_HBA >> 3);
494
495 for (i = 0; i < h->ndevices; i++) {
496 if (h->dev[i]->bus == bus && h->dev[i]->target != -1)
497 set_bit(h->dev[i]->target, lun_taken);
498 }
499
500 for (i = 0; i < HPSA_MAX_SCSI_DEVS_PER_HBA; i++) {
501 if (!test_bit(i, lun_taken)) {
502 /* *bus = 1; */
503 *target = i;
504 *lun = 0;
505 found = 1;
506 break;
507 }
508 }
509 return !found;
510}
511
512/* Add an entry into h->dev[] array. */
513static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno,
514 struct hpsa_scsi_dev_t *device,
515 struct hpsa_scsi_dev_t *added[], int *nadded)
516{
517 /* assumes h->devlock is held */
518 int n = h->ndevices;
519 int i;
520 unsigned char addr1[8], addr2[8];
521 struct hpsa_scsi_dev_t *sd;
522
523 if (n >= HPSA_MAX_SCSI_DEVS_PER_HBA) {
524 dev_err(&h->pdev->dev, "too many devices, some will be "
525 "inaccessible.\n");
526 return -1;
527 }
528
529 /* physical devices do not have lun or target assigned until now. */
530 if (device->lun != -1)
531 /* Logical device, lun is already assigned. */
532 goto lun_assigned;
533
534 /* If this device a non-zero lun of a multi-lun device
535 * byte 4 of the 8-byte LUN addr will contain the logical
536 * unit no, zero otherise.
537 */
538 if (device->scsi3addr[4] == 0) {
539 /* This is not a non-zero lun of a multi-lun device */
540 if (hpsa_find_target_lun(h, device->scsi3addr,
541 device->bus, &device->target, &device->lun) != 0)
542 return -1;
543 goto lun_assigned;
544 }
545
546 /* This is a non-zero lun of a multi-lun device.
547 * Search through our list and find the device which
548 * has the same 8 byte LUN address, excepting byte 4.
549 * Assign the same bus and target for this new LUN.
550 * Use the logical unit number from the firmware.
551 */
552 memcpy(addr1, device->scsi3addr, 8);
553 addr1[4] = 0;
554 for (i = 0; i < n; i++) {
555 sd = h->dev[i];
556 memcpy(addr2, sd->scsi3addr, 8);
557 addr2[4] = 0;
558 /* differ only in byte 4? */
559 if (memcmp(addr1, addr2, 8) == 0) {
560 device->bus = sd->bus;
561 device->target = sd->target;
562 device->lun = device->scsi3addr[4];
563 break;
564 }
565 }
566 if (device->lun == -1) {
567 dev_warn(&h->pdev->dev, "physical device with no LUN=0,"
568 " suspect firmware bug or unsupported hardware "
569 "configuration.\n");
570 return -1;
571 }
572
573lun_assigned:
574
575 h->dev[n] = device;
576 h->ndevices++;
577 added[*nadded] = device;
578 (*nadded)++;
579
580 /* initially, (before registering with scsi layer) we don't
581 * know our hostno and we don't want to print anything first
582 * time anyway (the scsi layer's inquiries will show that info)
583 */
584 /* if (hostno != -1) */
585 dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n",
586 scsi_device_type(device->devtype), hostno,
587 device->bus, device->target, device->lun);
588 return 0;
589}
590
Stephen M. Cameron2a8ccf32010-02-04 08:43:41 -0600591/* Replace an entry from h->dev[] array. */
592static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno,
593 int entry, struct hpsa_scsi_dev_t *new_entry,
594 struct hpsa_scsi_dev_t *added[], int *nadded,
595 struct hpsa_scsi_dev_t *removed[], int *nremoved)
596{
597 /* assumes h->devlock is held */
598 BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA);
599 removed[*nremoved] = h->dev[entry];
600 (*nremoved)++;
601 h->dev[entry] = new_entry;
602 added[*nadded] = new_entry;
603 (*nadded)++;
604 dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d changed.\n",
605 scsi_device_type(new_entry->devtype), hostno, new_entry->bus,
606 new_entry->target, new_entry->lun);
607}
608
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800609/* Remove an entry from h->dev[] array. */
610static void hpsa_scsi_remove_entry(struct ctlr_info *h, int hostno, int entry,
611 struct hpsa_scsi_dev_t *removed[], int *nremoved)
612{
613 /* assumes h->devlock is held */
614 int i;
615 struct hpsa_scsi_dev_t *sd;
616
Stephen M. Cameronb2ed4f72010-02-04 08:41:44 -0600617 BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA);
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800618
619 sd = h->dev[entry];
620 removed[*nremoved] = h->dev[entry];
621 (*nremoved)++;
622
623 for (i = entry; i < h->ndevices-1; i++)
624 h->dev[i] = h->dev[i+1];
625 h->ndevices--;
626 dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d removed.\n",
627 scsi_device_type(sd->devtype), hostno, sd->bus, sd->target,
628 sd->lun);
629}
630
631#define SCSI3ADDR_EQ(a, b) ( \
632 (a)[7] == (b)[7] && \
633 (a)[6] == (b)[6] && \
634 (a)[5] == (b)[5] && \
635 (a)[4] == (b)[4] && \
636 (a)[3] == (b)[3] && \
637 (a)[2] == (b)[2] && \
638 (a)[1] == (b)[1] && \
639 (a)[0] == (b)[0])
640
641static void fixup_botched_add(struct ctlr_info *h,
642 struct hpsa_scsi_dev_t *added)
643{
644 /* called when scsi_add_device fails in order to re-adjust
645 * h->dev[] to match the mid layer's view.
646 */
647 unsigned long flags;
648 int i, j;
649
650 spin_lock_irqsave(&h->lock, flags);
651 for (i = 0; i < h->ndevices; i++) {
652 if (h->dev[i] == added) {
653 for (j = i; j < h->ndevices-1; j++)
654 h->dev[j] = h->dev[j+1];
655 h->ndevices--;
656 break;
657 }
658 }
659 spin_unlock_irqrestore(&h->lock, flags);
660 kfree(added);
661}
662
663static inline int device_is_the_same(struct hpsa_scsi_dev_t *dev1,
664 struct hpsa_scsi_dev_t *dev2)
665{
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800666 /* we compare everything except lun and target as these
667 * are not yet assigned. Compare parts likely
668 * to differ first
669 */
670 if (memcmp(dev1->scsi3addr, dev2->scsi3addr,
671 sizeof(dev1->scsi3addr)) != 0)
672 return 0;
673 if (memcmp(dev1->device_id, dev2->device_id,
674 sizeof(dev1->device_id)) != 0)
675 return 0;
676 if (memcmp(dev1->model, dev2->model, sizeof(dev1->model)) != 0)
677 return 0;
678 if (memcmp(dev1->vendor, dev2->vendor, sizeof(dev1->vendor)) != 0)
679 return 0;
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800680 if (dev1->devtype != dev2->devtype)
681 return 0;
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800682 if (dev1->bus != dev2->bus)
683 return 0;
684 return 1;
685}
686
687/* Find needle in haystack. If exact match found, return DEVICE_SAME,
688 * and return needle location in *index. If scsi3addr matches, but not
689 * vendor, model, serial num, etc. return DEVICE_CHANGED, and return needle
690 * location in *index. If needle not found, return DEVICE_NOT_FOUND.
691 */
692static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t *needle,
693 struct hpsa_scsi_dev_t *haystack[], int haystack_size,
694 int *index)
695{
696 int i;
697#define DEVICE_NOT_FOUND 0
698#define DEVICE_CHANGED 1
699#define DEVICE_SAME 2
700 for (i = 0; i < haystack_size; i++) {
Stephen M. Cameron23231042010-02-04 08:43:36 -0600701 if (haystack[i] == NULL) /* previously removed. */
702 continue;
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800703 if (SCSI3ADDR_EQ(needle->scsi3addr, haystack[i]->scsi3addr)) {
704 *index = i;
705 if (device_is_the_same(needle, haystack[i]))
706 return DEVICE_SAME;
707 else
708 return DEVICE_CHANGED;
709 }
710 }
711 *index = -1;
712 return DEVICE_NOT_FOUND;
713}
714
Stephen M. Cameron4967bd32010-02-04 08:41:49 -0600715static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800716 struct hpsa_scsi_dev_t *sd[], int nsds)
717{
718 /* sd contains scsi3 addresses and devtypes, and inquiry
719 * data. This function takes what's in sd to be the current
720 * reality and updates h->dev[] to reflect that reality.
721 */
722 int i, entry, device_change, changes = 0;
723 struct hpsa_scsi_dev_t *csd;
724 unsigned long flags;
725 struct hpsa_scsi_dev_t **added, **removed;
726 int nadded, nremoved;
727 struct Scsi_Host *sh = NULL;
728
729 added = kzalloc(sizeof(*added) * HPSA_MAX_SCSI_DEVS_PER_HBA,
730 GFP_KERNEL);
731 removed = kzalloc(sizeof(*removed) * HPSA_MAX_SCSI_DEVS_PER_HBA,
732 GFP_KERNEL);
733
734 if (!added || !removed) {
735 dev_warn(&h->pdev->dev, "out of memory in "
736 "adjust_hpsa_scsi_table\n");
737 goto free_and_out;
738 }
739
740 spin_lock_irqsave(&h->devlock, flags);
741
742 /* find any devices in h->dev[] that are not in
743 * sd[] and remove them from h->dev[], and for any
744 * devices which have changed, remove the old device
745 * info and add the new device info.
746 */
747 i = 0;
748 nremoved = 0;
749 nadded = 0;
750 while (i < h->ndevices) {
751 csd = h->dev[i];
752 device_change = hpsa_scsi_find_entry(csd, sd, nsds, &entry);
753 if (device_change == DEVICE_NOT_FOUND) {
754 changes++;
755 hpsa_scsi_remove_entry(h, hostno, i,
756 removed, &nremoved);
757 continue; /* remove ^^^, hence i not incremented */
758 } else if (device_change == DEVICE_CHANGED) {
759 changes++;
Stephen M. Cameron2a8ccf32010-02-04 08:43:41 -0600760 hpsa_scsi_replace_entry(h, hostno, i, sd[entry],
761 added, &nadded, removed, &nremoved);
Stephen M. Cameronc7f172d2010-02-04 08:43:31 -0600762 /* Set it to NULL to prevent it from being freed
763 * at the bottom of hpsa_update_scsi_devices()
764 */
765 sd[entry] = NULL;
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800766 }
767 i++;
768 }
769
770 /* Now, make sure every device listed in sd[] is also
771 * listed in h->dev[], adding them if they aren't found
772 */
773
774 for (i = 0; i < nsds; i++) {
775 if (!sd[i]) /* if already added above. */
776 continue;
777 device_change = hpsa_scsi_find_entry(sd[i], h->dev,
778 h->ndevices, &entry);
779 if (device_change == DEVICE_NOT_FOUND) {
780 changes++;
781 if (hpsa_scsi_add_entry(h, hostno, sd[i],
782 added, &nadded) != 0)
783 break;
784 sd[i] = NULL; /* prevent from being freed later. */
785 } else if (device_change == DEVICE_CHANGED) {
786 /* should never happen... */
787 changes++;
788 dev_warn(&h->pdev->dev,
789 "device unexpectedly changed.\n");
790 /* but if it does happen, we just ignore that device */
791 }
792 }
793 spin_unlock_irqrestore(&h->devlock, flags);
794
795 /* Don't notify scsi mid layer of any changes the first time through
796 * (or if there are no changes) scsi_scan_host will do it later the
797 * first time through.
798 */
799 if (hostno == -1 || !changes)
800 goto free_and_out;
801
802 sh = h->scsi_host;
803 /* Notify scsi mid layer of any removed devices */
804 for (i = 0; i < nremoved; i++) {
805 struct scsi_device *sdev =
806 scsi_device_lookup(sh, removed[i]->bus,
807 removed[i]->target, removed[i]->lun);
808 if (sdev != NULL) {
809 scsi_remove_device(sdev);
810 scsi_device_put(sdev);
811 } else {
812 /* We don't expect to get here.
813 * future cmds to this device will get selection
814 * timeout as if the device was gone.
815 */
816 dev_warn(&h->pdev->dev, "didn't find c%db%dt%dl%d "
817 " for removal.", hostno, removed[i]->bus,
818 removed[i]->target, removed[i]->lun);
819 }
820 kfree(removed[i]);
821 removed[i] = NULL;
822 }
823
824 /* Notify scsi mid layer of any added devices */
825 for (i = 0; i < nadded; i++) {
826 if (scsi_add_device(sh, added[i]->bus,
827 added[i]->target, added[i]->lun) == 0)
828 continue;
829 dev_warn(&h->pdev->dev, "scsi_add_device c%db%dt%dl%d failed, "
830 "device not added.\n", hostno, added[i]->bus,
831 added[i]->target, added[i]->lun);
832 /* now we have to remove it from h->dev,
833 * since it didn't get added to scsi mid layer
834 */
835 fixup_botched_add(h, added[i]);
836 }
837
838free_and_out:
839 kfree(added);
840 kfree(removed);
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800841}
842
843/*
844 * Lookup bus/target/lun and retrun corresponding struct hpsa_scsi_dev_t *
845 * Assume's h->devlock is held.
846 */
847static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h,
848 int bus, int target, int lun)
849{
850 int i;
851 struct hpsa_scsi_dev_t *sd;
852
853 for (i = 0; i < h->ndevices; i++) {
854 sd = h->dev[i];
855 if (sd->bus == bus && sd->target == target && sd->lun == lun)
856 return sd;
857 }
858 return NULL;
859}
860
861/* link sdev->hostdata to our per-device structure. */
862static int hpsa_slave_alloc(struct scsi_device *sdev)
863{
864 struct hpsa_scsi_dev_t *sd;
865 unsigned long flags;
866 struct ctlr_info *h;
867
868 h = sdev_to_hba(sdev);
869 spin_lock_irqsave(&h->devlock, flags);
870 sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev),
871 sdev_id(sdev), sdev->lun);
872 if (sd != NULL)
873 sdev->hostdata = sd;
874 spin_unlock_irqrestore(&h->devlock, flags);
875 return 0;
876}
877
878static void hpsa_slave_destroy(struct scsi_device *sdev)
879{
Stephen M. Cameronbcc44252010-02-04 08:41:54 -0600880 /* nothing to do. */
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800881}
882
883static void hpsa_scsi_setup(struct ctlr_info *h)
884{
885 h->ndevices = 0;
886 h->scsi_host = NULL;
887 spin_lock_init(&h->devlock);
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800888}
889
Stephen M. Cameron33a2ffc2010-02-25 14:03:27 -0600890static void hpsa_free_sg_chain_blocks(struct ctlr_info *h)
891{
892 int i;
893
894 if (!h->cmd_sg_list)
895 return;
896 for (i = 0; i < h->nr_cmds; i++) {
897 kfree(h->cmd_sg_list[i]);
898 h->cmd_sg_list[i] = NULL;
899 }
900 kfree(h->cmd_sg_list);
901 h->cmd_sg_list = NULL;
902}
903
904static int hpsa_allocate_sg_chain_blocks(struct ctlr_info *h)
905{
906 int i;
907
908 if (h->chainsize <= 0)
909 return 0;
910
911 h->cmd_sg_list = kzalloc(sizeof(*h->cmd_sg_list) * h->nr_cmds,
912 GFP_KERNEL);
913 if (!h->cmd_sg_list)
914 return -ENOMEM;
915 for (i = 0; i < h->nr_cmds; i++) {
916 h->cmd_sg_list[i] = kmalloc(sizeof(*h->cmd_sg_list[i]) *
917 h->chainsize, GFP_KERNEL);
918 if (!h->cmd_sg_list[i])
919 goto clean;
920 }
921 return 0;
922
923clean:
924 hpsa_free_sg_chain_blocks(h);
925 return -ENOMEM;
926}
927
928static void hpsa_map_sg_chain_block(struct ctlr_info *h,
929 struct CommandList *c)
930{
931 struct SGDescriptor *chain_sg, *chain_block;
932 u64 temp64;
933
934 chain_sg = &c->SG[h->max_cmd_sg_entries - 1];
935 chain_block = h->cmd_sg_list[c->cmdindex];
936 chain_sg->Ext = HPSA_SG_CHAIN;
937 chain_sg->Len = sizeof(*chain_sg) *
938 (c->Header.SGTotal - h->max_cmd_sg_entries);
939 temp64 = pci_map_single(h->pdev, chain_block, chain_sg->Len,
940 PCI_DMA_TODEVICE);
941 chain_sg->Addr.lower = (u32) (temp64 & 0x0FFFFFFFFULL);
942 chain_sg->Addr.upper = (u32) ((temp64 >> 32) & 0x0FFFFFFFFULL);
943}
944
945static void hpsa_unmap_sg_chain_block(struct ctlr_info *h,
946 struct CommandList *c)
947{
948 struct SGDescriptor *chain_sg;
949 union u64bit temp64;
950
951 if (c->Header.SGTotal <= h->max_cmd_sg_entries)
952 return;
953
954 chain_sg = &c->SG[h->max_cmd_sg_entries - 1];
955 temp64.val32.lower = chain_sg->Addr.lower;
956 temp64.val32.upper = chain_sg->Addr.upper;
957 pci_unmap_single(h->pdev, temp64.val, chain_sg->Len, PCI_DMA_TODEVICE);
958}
959
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800960static void complete_scsi_command(struct CommandList *cp,
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -0600961 int timeout, u32 tag)
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800962{
963 struct scsi_cmnd *cmd;
964 struct ctlr_info *h;
965 struct ErrorInfo *ei;
966
967 unsigned char sense_key;
968 unsigned char asc; /* additional sense code */
969 unsigned char ascq; /* additional sense code qualifier */
970
971 ei = cp->err_info;
972 cmd = (struct scsi_cmnd *) cp->scsi_cmd;
973 h = cp->h;
974
975 scsi_dma_unmap(cmd); /* undo the DMA mappings */
Stephen M. Cameron33a2ffc2010-02-25 14:03:27 -0600976 if (cp->Header.SGTotal > h->max_cmd_sg_entries)
977 hpsa_unmap_sg_chain_block(h, cp);
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800978
979 cmd->result = (DID_OK << 16); /* host byte */
980 cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */
Stephen M. Cameron55126722010-02-25 14:03:01 -0600981 cmd->result |= ei->ScsiStatus;
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800982
983 /* copy the sense data whether we need to or not. */
984 memcpy(cmd->sense_buffer, ei->SenseInfo,
985 ei->SenseLen > SCSI_SENSE_BUFFERSIZE ?
986 SCSI_SENSE_BUFFERSIZE :
987 ei->SenseLen);
988 scsi_set_resid(cmd, ei->ResidualCnt);
989
990 if (ei->CommandStatus == 0) {
991 cmd->scsi_done(cmd);
992 cmd_free(h, cp);
993 return;
994 }
995
996 /* an error has occurred */
997 switch (ei->CommandStatus) {
998
999 case CMD_TARGET_STATUS:
1000 if (ei->ScsiStatus) {
1001 /* Get sense key */
1002 sense_key = 0xf & ei->SenseInfo[2];
1003 /* Get additional sense code */
1004 asc = ei->SenseInfo[12];
1005 /* Get addition sense code qualifier */
1006 ascq = ei->SenseInfo[13];
1007 }
1008
1009 if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION) {
1010 if (check_for_unit_attention(h, cp)) {
1011 cmd->result = DID_SOFT_ERROR << 16;
1012 break;
1013 }
1014 if (sense_key == ILLEGAL_REQUEST) {
1015 /*
1016 * SCSI REPORT_LUNS is commonly unsupported on
1017 * Smart Array. Suppress noisy complaint.
1018 */
1019 if (cp->Request.CDB[0] == REPORT_LUNS)
1020 break;
1021
1022 /* If ASC/ASCQ indicate Logical Unit
1023 * Not Supported condition,
1024 */
1025 if ((asc == 0x25) && (ascq == 0x0)) {
1026 dev_warn(&h->pdev->dev, "cp %p "
1027 "has check condition\n", cp);
1028 break;
1029 }
1030 }
1031
1032 if (sense_key == NOT_READY) {
1033 /* If Sense is Not Ready, Logical Unit
1034 * Not ready, Manual Intervention
1035 * required
1036 */
1037 if ((asc == 0x04) && (ascq == 0x03)) {
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001038 dev_warn(&h->pdev->dev, "cp %p "
1039 "has check condition: unit "
1040 "not ready, manual "
1041 "intervention required\n", cp);
1042 break;
1043 }
1044 }
Matt Gates1d3b3602010-02-04 08:43:00 -06001045 if (sense_key == ABORTED_COMMAND) {
1046 /* Aborted command is retryable */
1047 dev_warn(&h->pdev->dev, "cp %p "
1048 "has check condition: aborted command: "
1049 "ASC: 0x%x, ASCQ: 0x%x\n",
1050 cp, asc, ascq);
1051 cmd->result = DID_SOFT_ERROR << 16;
1052 break;
1053 }
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001054 /* Must be some other type of check condition */
1055 dev_warn(&h->pdev->dev, "cp %p has check condition: "
1056 "unknown type: "
1057 "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, "
1058 "Returning result: 0x%x, "
1059 "cmd=[%02x %02x %02x %02x %02x "
Mike Miller807be732010-02-04 08:43:26 -06001060 "%02x %02x %02x %02x %02x %02x "
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001061 "%02x %02x %02x %02x %02x]\n",
1062 cp, sense_key, asc, ascq,
1063 cmd->result,
1064 cmd->cmnd[0], cmd->cmnd[1],
1065 cmd->cmnd[2], cmd->cmnd[3],
1066 cmd->cmnd[4], cmd->cmnd[5],
1067 cmd->cmnd[6], cmd->cmnd[7],
Mike Miller807be732010-02-04 08:43:26 -06001068 cmd->cmnd[8], cmd->cmnd[9],
1069 cmd->cmnd[10], cmd->cmnd[11],
1070 cmd->cmnd[12], cmd->cmnd[13],
1071 cmd->cmnd[14], cmd->cmnd[15]);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001072 break;
1073 }
1074
1075
1076 /* Problem was not a check condition
1077 * Pass it up to the upper layers...
1078 */
1079 if (ei->ScsiStatus) {
1080 dev_warn(&h->pdev->dev, "cp %p has status 0x%x "
1081 "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, "
1082 "Returning result: 0x%x\n",
1083 cp, ei->ScsiStatus,
1084 sense_key, asc, ascq,
1085 cmd->result);
1086 } else { /* scsi status is zero??? How??? */
1087 dev_warn(&h->pdev->dev, "cp %p SCSI status was 0. "
1088 "Returning no connection.\n", cp),
1089
1090 /* Ordinarily, this case should never happen,
1091 * but there is a bug in some released firmware
1092 * revisions that allows it to happen if, for
1093 * example, a 4100 backplane loses power and
1094 * the tape drive is in it. We assume that
1095 * it's a fatal error of some kind because we
1096 * can't show that it wasn't. We will make it
1097 * look like selection timeout since that is
1098 * the most common reason for this to occur,
1099 * and it's severe enough.
1100 */
1101
1102 cmd->result = DID_NO_CONNECT << 16;
1103 }
1104 break;
1105
1106 case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
1107 break;
1108 case CMD_DATA_OVERRUN:
1109 dev_warn(&h->pdev->dev, "cp %p has"
1110 " completed with data overrun "
1111 "reported\n", cp);
1112 break;
1113 case CMD_INVALID: {
1114 /* print_bytes(cp, sizeof(*cp), 1, 0);
1115 print_cmd(cp); */
1116 /* We get CMD_INVALID if you address a non-existent device
1117 * instead of a selection timeout (no response). You will
1118 * see this if you yank out a drive, then try to access it.
1119 * This is kind of a shame because it means that any other
1120 * CMD_INVALID (e.g. driver bug) will get interpreted as a
1121 * missing target. */
1122 cmd->result = DID_NO_CONNECT << 16;
1123 }
1124 break;
1125 case CMD_PROTOCOL_ERR:
1126 dev_warn(&h->pdev->dev, "cp %p has "
1127 "protocol error \n", cp);
1128 break;
1129 case CMD_HARDWARE_ERR:
1130 cmd->result = DID_ERROR << 16;
1131 dev_warn(&h->pdev->dev, "cp %p had hardware error\n", cp);
1132 break;
1133 case CMD_CONNECTION_LOST:
1134 cmd->result = DID_ERROR << 16;
1135 dev_warn(&h->pdev->dev, "cp %p had connection lost\n", cp);
1136 break;
1137 case CMD_ABORTED:
1138 cmd->result = DID_ABORT << 16;
1139 dev_warn(&h->pdev->dev, "cp %p was aborted with status 0x%x\n",
1140 cp, ei->ScsiStatus);
1141 break;
1142 case CMD_ABORT_FAILED:
1143 cmd->result = DID_ERROR << 16;
1144 dev_warn(&h->pdev->dev, "cp %p reports abort failed\n", cp);
1145 break;
1146 case CMD_UNSOLICITED_ABORT:
Matt Gates5f0325a2010-02-04 08:42:55 -06001147 cmd->result = DID_RESET << 16;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001148 dev_warn(&h->pdev->dev, "cp %p aborted do to an unsolicited "
1149 "abort\n", cp);
1150 break;
1151 case CMD_TIMEOUT:
1152 cmd->result = DID_TIME_OUT << 16;
1153 dev_warn(&h->pdev->dev, "cp %p timedout\n", cp);
1154 break;
Stephen M. Cameron1d5e2ed2011-01-07 10:55:48 -06001155 case CMD_UNABORTABLE:
1156 cmd->result = DID_ERROR << 16;
1157 dev_warn(&h->pdev->dev, "Command unabortable\n");
1158 break;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001159 default:
1160 cmd->result = DID_ERROR << 16;
1161 dev_warn(&h->pdev->dev, "cp %p returned unknown status %x\n",
1162 cp, ei->CommandStatus);
1163 }
1164 cmd->scsi_done(cmd);
1165 cmd_free(h, cp);
1166}
1167
1168static int hpsa_scsi_detect(struct ctlr_info *h)
1169{
1170 struct Scsi_Host *sh;
1171 int error;
1172
1173 sh = scsi_host_alloc(&hpsa_driver_template, sizeof(h));
1174 if (sh == NULL)
1175 goto fail;
1176
1177 sh->io_port = 0;
1178 sh->n_io_port = 0;
1179 sh->this_id = -1;
1180 sh->max_channel = 3;
1181 sh->max_cmd_len = MAX_COMMAND_SIZE;
1182 sh->max_lun = HPSA_MAX_LUN;
1183 sh->max_id = HPSA_MAX_LUN;
Don Brace303932f2010-02-04 08:42:40 -06001184 sh->can_queue = h->nr_cmds;
1185 sh->cmd_per_lun = h->nr_cmds;
Stephen M. Cameron33a2ffc2010-02-25 14:03:27 -06001186 sh->sg_tablesize = h->maxsgentries;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001187 h->scsi_host = sh;
1188 sh->hostdata[0] = (unsigned long) h;
Don Brace303932f2010-02-04 08:42:40 -06001189 sh->irq = h->intr[PERF_MODE_INT];
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001190 sh->unique_id = sh->irq;
1191 error = scsi_add_host(sh, &h->pdev->dev);
1192 if (error)
1193 goto fail_host_put;
1194 scsi_scan_host(sh);
1195 return 0;
1196
1197 fail_host_put:
1198 dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_add_host"
1199 " failed for controller %d\n", h->ctlr);
1200 scsi_host_put(sh);
Stephen M. Cameronecd9aad2010-02-04 08:41:59 -06001201 return error;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001202 fail:
1203 dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_host_alloc"
1204 " failed for controller %d\n", h->ctlr);
Stephen M. Cameronecd9aad2010-02-04 08:41:59 -06001205 return -ENOMEM;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001206}
1207
1208static void hpsa_pci_unmap(struct pci_dev *pdev,
1209 struct CommandList *c, int sg_used, int data_direction)
1210{
1211 int i;
1212 union u64bit addr64;
1213
1214 for (i = 0; i < sg_used; i++) {
1215 addr64.val32.lower = c->SG[i].Addr.lower;
1216 addr64.val32.upper = c->SG[i].Addr.upper;
1217 pci_unmap_single(pdev, (dma_addr_t) addr64.val, c->SG[i].Len,
1218 data_direction);
1219 }
1220}
1221
1222static void hpsa_map_one(struct pci_dev *pdev,
1223 struct CommandList *cp,
1224 unsigned char *buf,
1225 size_t buflen,
1226 int data_direction)
1227{
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06001228 u64 addr64;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001229
1230 if (buflen == 0 || data_direction == PCI_DMA_NONE) {
1231 cp->Header.SGList = 0;
1232 cp->Header.SGTotal = 0;
1233 return;
1234 }
1235
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06001236 addr64 = (u64) pci_map_single(pdev, buf, buflen, data_direction);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001237 cp->SG[0].Addr.lower =
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06001238 (u32) (addr64 & (u64) 0x00000000FFFFFFFF);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001239 cp->SG[0].Addr.upper =
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06001240 (u32) ((addr64 >> 32) & (u64) 0x00000000FFFFFFFF);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001241 cp->SG[0].Len = buflen;
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06001242 cp->Header.SGList = (u8) 1; /* no. SGs contig in this cmd */
1243 cp->Header.SGTotal = (u16) 1; /* total sgs in this cmd list */
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001244}
1245
1246static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h,
1247 struct CommandList *c)
1248{
1249 DECLARE_COMPLETION_ONSTACK(wait);
1250
1251 c->waiting = &wait;
1252 enqueue_cmd_and_start_io(h, c);
1253 wait_for_completion(&wait);
1254}
1255
1256static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h,
1257 struct CommandList *c, int data_direction)
1258{
1259 int retry_count = 0;
1260
1261 do {
1262 memset(c->err_info, 0, sizeof(c->err_info));
1263 hpsa_scsi_do_simple_cmd_core(h, c);
1264 retry_count++;
1265 } while (check_for_unit_attention(h, c) && retry_count <= 3);
1266 hpsa_pci_unmap(h->pdev, c, 1, data_direction);
1267}
1268
1269static void hpsa_scsi_interpret_error(struct CommandList *cp)
1270{
1271 struct ErrorInfo *ei;
1272 struct device *d = &cp->h->pdev->dev;
1273
1274 ei = cp->err_info;
1275 switch (ei->CommandStatus) {
1276 case CMD_TARGET_STATUS:
1277 dev_warn(d, "cmd %p has completed with errors\n", cp);
1278 dev_warn(d, "cmd %p has SCSI Status = %x\n", cp,
1279 ei->ScsiStatus);
1280 if (ei->ScsiStatus == 0)
1281 dev_warn(d, "SCSI status is abnormally zero. "
1282 "(probably indicates selection timeout "
1283 "reported incorrectly due to a known "
1284 "firmware bug, circa July, 2001.)\n");
1285 break;
1286 case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
1287 dev_info(d, "UNDERRUN\n");
1288 break;
1289 case CMD_DATA_OVERRUN:
1290 dev_warn(d, "cp %p has completed with data overrun\n", cp);
1291 break;
1292 case CMD_INVALID: {
1293 /* controller unfortunately reports SCSI passthru's
1294 * to non-existent targets as invalid commands.
1295 */
1296 dev_warn(d, "cp %p is reported invalid (probably means "
1297 "target device no longer present)\n", cp);
1298 /* print_bytes((unsigned char *) cp, sizeof(*cp), 1, 0);
1299 print_cmd(cp); */
1300 }
1301 break;
1302 case CMD_PROTOCOL_ERR:
1303 dev_warn(d, "cp %p has protocol error \n", cp);
1304 break;
1305 case CMD_HARDWARE_ERR:
1306 /* cmd->result = DID_ERROR << 16; */
1307 dev_warn(d, "cp %p had hardware error\n", cp);
1308 break;
1309 case CMD_CONNECTION_LOST:
1310 dev_warn(d, "cp %p had connection lost\n", cp);
1311 break;
1312 case CMD_ABORTED:
1313 dev_warn(d, "cp %p was aborted\n", cp);
1314 break;
1315 case CMD_ABORT_FAILED:
1316 dev_warn(d, "cp %p reports abort failed\n", cp);
1317 break;
1318 case CMD_UNSOLICITED_ABORT:
1319 dev_warn(d, "cp %p aborted due to an unsolicited abort\n", cp);
1320 break;
1321 case CMD_TIMEOUT:
1322 dev_warn(d, "cp %p timed out\n", cp);
1323 break;
Stephen M. Cameron1d5e2ed2011-01-07 10:55:48 -06001324 case CMD_UNABORTABLE:
1325 dev_warn(d, "Command unabortable\n");
1326 break;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001327 default:
1328 dev_warn(d, "cp %p returned unknown status %x\n", cp,
1329 ei->CommandStatus);
1330 }
1331}
1332
1333static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr,
1334 unsigned char page, unsigned char *buf,
1335 unsigned char bufsize)
1336{
1337 int rc = IO_OK;
1338 struct CommandList *c;
1339 struct ErrorInfo *ei;
1340
1341 c = cmd_special_alloc(h);
1342
1343 if (c == NULL) { /* trouble... */
1344 dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
Stephen M. Cameronecd9aad2010-02-04 08:41:59 -06001345 return -ENOMEM;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001346 }
1347
1348 fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize, page, scsi3addr, TYPE_CMD);
1349 hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
1350 ei = c->err_info;
1351 if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
1352 hpsa_scsi_interpret_error(c);
1353 rc = -1;
1354 }
1355 cmd_special_free(h, c);
1356 return rc;
1357}
1358
1359static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr)
1360{
1361 int rc = IO_OK;
1362 struct CommandList *c;
1363 struct ErrorInfo *ei;
1364
1365 c = cmd_special_alloc(h);
1366
1367 if (c == NULL) { /* trouble... */
1368 dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
Stephen M. Camerone9ea04a2010-02-25 14:03:06 -06001369 return -ENOMEM;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001370 }
1371
1372 fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, scsi3addr, TYPE_MSG);
1373 hpsa_scsi_do_simple_cmd_core(h, c);
1374 /* no unmap needed here because no data xfer. */
1375
1376 ei = c->err_info;
1377 if (ei->CommandStatus != 0) {
1378 hpsa_scsi_interpret_error(c);
1379 rc = -1;
1380 }
1381 cmd_special_free(h, c);
1382 return rc;
1383}
1384
1385static void hpsa_get_raid_level(struct ctlr_info *h,
1386 unsigned char *scsi3addr, unsigned char *raid_level)
1387{
1388 int rc;
1389 unsigned char *buf;
1390
1391 *raid_level = RAID_UNKNOWN;
1392 buf = kzalloc(64, GFP_KERNEL);
1393 if (!buf)
1394 return;
1395 rc = hpsa_scsi_do_inquiry(h, scsi3addr, 0xC1, buf, 64);
1396 if (rc == 0)
1397 *raid_level = buf[8];
1398 if (*raid_level > RAID_UNKNOWN)
1399 *raid_level = RAID_UNKNOWN;
1400 kfree(buf);
1401 return;
1402}
1403
1404/* Get the device id from inquiry page 0x83 */
1405static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr,
1406 unsigned char *device_id, int buflen)
1407{
1408 int rc;
1409 unsigned char *buf;
1410
1411 if (buflen > 16)
1412 buflen = 16;
1413 buf = kzalloc(64, GFP_KERNEL);
1414 if (!buf)
1415 return -1;
1416 rc = hpsa_scsi_do_inquiry(h, scsi3addr, 0x83, buf, 64);
1417 if (rc == 0)
1418 memcpy(device_id, &buf[8], buflen);
1419 kfree(buf);
1420 return rc != 0;
1421}
1422
1423static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical,
1424 struct ReportLUNdata *buf, int bufsize,
1425 int extended_response)
1426{
1427 int rc = IO_OK;
1428 struct CommandList *c;
1429 unsigned char scsi3addr[8];
1430 struct ErrorInfo *ei;
1431
1432 c = cmd_special_alloc(h);
1433 if (c == NULL) { /* trouble... */
1434 dev_err(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
1435 return -1;
1436 }
Stephen M. Camerone89c0ae2010-02-04 08:42:04 -06001437 /* address the controller */
1438 memset(scsi3addr, 0, sizeof(scsi3addr));
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001439 fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h,
1440 buf, bufsize, 0, scsi3addr, TYPE_CMD);
1441 if (extended_response)
1442 c->Request.CDB[1] = extended_response;
1443 hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
1444 ei = c->err_info;
1445 if (ei->CommandStatus != 0 &&
1446 ei->CommandStatus != CMD_DATA_UNDERRUN) {
1447 hpsa_scsi_interpret_error(c);
1448 rc = -1;
1449 }
1450 cmd_special_free(h, c);
1451 return rc;
1452}
1453
1454static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h,
1455 struct ReportLUNdata *buf,
1456 int bufsize, int extended_response)
1457{
1458 return hpsa_scsi_do_report_luns(h, 0, buf, bufsize, extended_response);
1459}
1460
1461static inline int hpsa_scsi_do_report_log_luns(struct ctlr_info *h,
1462 struct ReportLUNdata *buf, int bufsize)
1463{
1464 return hpsa_scsi_do_report_luns(h, 1, buf, bufsize, 0);
1465}
1466
1467static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device,
1468 int bus, int target, int lun)
1469{
1470 device->bus = bus;
1471 device->target = target;
1472 device->lun = lun;
1473}
1474
1475static int hpsa_update_device_info(struct ctlr_info *h,
1476 unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device)
1477{
1478#define OBDR_TAPE_INQ_SIZE 49
Stephen M. Cameronea6d3bc2010-02-04 08:42:09 -06001479 unsigned char *inq_buff;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001480
Stephen M. Cameronea6d3bc2010-02-04 08:42:09 -06001481 inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001482 if (!inq_buff)
1483 goto bail_out;
1484
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001485 /* Do an inquiry to the device to see what it is. */
1486 if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
1487 (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) {
1488 /* Inquiry failed (msg printed already) */
1489 dev_err(&h->pdev->dev,
1490 "hpsa_update_device_info: inquiry failed\n");
1491 goto bail_out;
1492 }
1493
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001494 this_device->devtype = (inq_buff[0] & 0x1f);
1495 memcpy(this_device->scsi3addr, scsi3addr, 8);
1496 memcpy(this_device->vendor, &inq_buff[8],
1497 sizeof(this_device->vendor));
1498 memcpy(this_device->model, &inq_buff[16],
1499 sizeof(this_device->model));
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001500 memset(this_device->device_id, 0,
1501 sizeof(this_device->device_id));
1502 hpsa_get_device_id(h, scsi3addr, this_device->device_id,
1503 sizeof(this_device->device_id));
1504
1505 if (this_device->devtype == TYPE_DISK &&
1506 is_logical_dev_addr_mode(scsi3addr))
1507 hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level);
1508 else
1509 this_device->raid_level = RAID_UNKNOWN;
1510
1511 kfree(inq_buff);
1512 return 0;
1513
1514bail_out:
1515 kfree(inq_buff);
1516 return 1;
1517}
1518
1519static unsigned char *msa2xxx_model[] = {
1520 "MSA2012",
1521 "MSA2024",
1522 "MSA2312",
1523 "MSA2324",
1524 NULL,
1525};
1526
1527static int is_msa2xxx(struct ctlr_info *h, struct hpsa_scsi_dev_t *device)
1528{
1529 int i;
1530
1531 for (i = 0; msa2xxx_model[i]; i++)
1532 if (strncmp(device->model, msa2xxx_model[i],
1533 strlen(msa2xxx_model[i])) == 0)
1534 return 1;
1535 return 0;
1536}
1537
1538/* Helper function to assign bus, target, lun mapping of devices.
1539 * Puts non-msa2xxx logical volumes on bus 0, msa2xxx logical
1540 * volumes on bus 1, physical devices on bus 2. and the hba on bus 3.
1541 * Logical drive target and lun are assigned at this time, but
1542 * physical device lun and target assignment are deferred (assigned
1543 * in hpsa_find_target_lun, called by hpsa_scsi_add_entry.)
1544 */
1545static void figure_bus_target_lun(struct ctlr_info *h,
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06001546 u8 *lunaddrbytes, int *bus, int *target, int *lun,
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001547 struct hpsa_scsi_dev_t *device)
1548{
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06001549 u32 lunid;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001550
1551 if (is_logical_dev_addr_mode(lunaddrbytes)) {
1552 /* logical device */
Stephen M. Cameron339b2b12010-02-04 08:42:50 -06001553 if (unlikely(is_scsi_rev_5(h))) {
1554 /* p1210m, logical drives lun assignments
1555 * match SCSI REPORT LUNS data.
1556 */
1557 lunid = le32_to_cpu(*((__le32 *) lunaddrbytes));
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001558 *bus = 0;
Stephen M. Cameron339b2b12010-02-04 08:42:50 -06001559 *target = 0;
1560 *lun = (lunid & 0x3fff) + 1;
1561 } else {
1562 /* not p1210m... */
1563 lunid = le32_to_cpu(*((__le32 *) lunaddrbytes));
1564 if (is_msa2xxx(h, device)) {
1565 /* msa2xxx way, put logicals on bus 1
1566 * and match target/lun numbers box
1567 * reports.
1568 */
1569 *bus = 1;
1570 *target = (lunid >> 16) & 0x3fff;
1571 *lun = lunid & 0x00ff;
1572 } else {
1573 /* Traditional smart array way. */
1574 *bus = 0;
1575 *lun = 0;
1576 *target = lunid & 0x3fff;
1577 }
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001578 }
1579 } else {
1580 /* physical device */
1581 if (is_hba_lunid(lunaddrbytes))
Stephen M. Cameron339b2b12010-02-04 08:42:50 -06001582 if (unlikely(is_scsi_rev_5(h))) {
1583 *bus = 0; /* put p1210m ctlr at 0,0,0 */
1584 *target = 0;
1585 *lun = 0;
1586 return;
1587 } else
1588 *bus = 3; /* traditional smartarray */
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001589 else
Stephen M. Cameron339b2b12010-02-04 08:42:50 -06001590 *bus = 2; /* physical disk */
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001591 *target = -1;
1592 *lun = -1; /* we will fill these in later. */
1593 }
1594}
1595
1596/*
1597 * If there is no lun 0 on a target, linux won't find any devices.
1598 * For the MSA2xxx boxes, we have to manually detect the enclosure
1599 * which is at lun zero, as CCISS_REPORT_PHYSICAL_LUNS doesn't report
1600 * it for some reason. *tmpdevice is the target we're adding,
1601 * this_device is a pointer into the current element of currentsd[]
1602 * that we're building up in update_scsi_devices(), below.
1603 * lunzerobits is a bitmap that tracks which targets already have a
1604 * lun 0 assigned.
1605 * Returns 1 if an enclosure was added, 0 if not.
1606 */
1607static int add_msa2xxx_enclosure_device(struct ctlr_info *h,
1608 struct hpsa_scsi_dev_t *tmpdevice,
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06001609 struct hpsa_scsi_dev_t *this_device, u8 *lunaddrbytes,
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001610 int bus, int target, int lun, unsigned long lunzerobits[],
1611 int *nmsa2xxx_enclosures)
1612{
1613 unsigned char scsi3addr[8];
1614
1615 if (test_bit(target, lunzerobits))
1616 return 0; /* There is already a lun 0 on this target. */
1617
1618 if (!is_logical_dev_addr_mode(lunaddrbytes))
1619 return 0; /* It's the logical targets that may lack lun 0. */
1620
1621 if (!is_msa2xxx(h, tmpdevice))
1622 return 0; /* It's only the MSA2xxx that have this problem. */
1623
1624 if (lun == 0) /* if lun is 0, then obviously we have a lun 0. */
1625 return 0;
1626
Stephen M. Cameronc4f8a292011-01-07 10:55:43 -06001627 memset(scsi3addr, 0, 8);
1628 scsi3addr[3] = target;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001629 if (is_hba_lunid(scsi3addr))
1630 return 0; /* Don't add the RAID controller here. */
1631
Stephen M. Cameron339b2b12010-02-04 08:42:50 -06001632 if (is_scsi_rev_5(h))
1633 return 0; /* p1210m doesn't need to do this. */
1634
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001635#define MAX_MSA2XXX_ENCLOSURES 32
1636 if (*nmsa2xxx_enclosures >= MAX_MSA2XXX_ENCLOSURES) {
1637 dev_warn(&h->pdev->dev, "Maximum number of MSA2XXX "
1638 "enclosures exceeded. Check your hardware "
1639 "configuration.");
1640 return 0;
1641 }
1642
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001643 if (hpsa_update_device_info(h, scsi3addr, this_device))
1644 return 0;
1645 (*nmsa2xxx_enclosures)++;
1646 hpsa_set_bus_target_lun(this_device, bus, target, 0);
1647 set_bit(target, lunzerobits);
1648 return 1;
1649}
1650
1651/*
1652 * Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev,
1653 * logdev. The number of luns in physdev and logdev are returned in
1654 * *nphysicals and *nlogicals, respectively.
1655 * Returns 0 on success, -1 otherwise.
1656 */
1657static int hpsa_gather_lun_info(struct ctlr_info *h,
1658 int reportlunsize,
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06001659 struct ReportLUNdata *physdev, u32 *nphysicals,
1660 struct ReportLUNdata *logdev, u32 *nlogicals)
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001661{
1662 if (hpsa_scsi_do_report_phys_luns(h, physdev, reportlunsize, 0)) {
1663 dev_err(&h->pdev->dev, "report physical LUNs failed.\n");
1664 return -1;
1665 }
Stephen M. Cameron6df1e952010-02-04 08:42:19 -06001666 *nphysicals = be32_to_cpu(*((__be32 *)physdev->LUNListLength)) / 8;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001667 if (*nphysicals > HPSA_MAX_PHYS_LUN) {
1668 dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded."
1669 " %d LUNs ignored.\n", HPSA_MAX_PHYS_LUN,
1670 *nphysicals - HPSA_MAX_PHYS_LUN);
1671 *nphysicals = HPSA_MAX_PHYS_LUN;
1672 }
1673 if (hpsa_scsi_do_report_log_luns(h, logdev, reportlunsize)) {
1674 dev_err(&h->pdev->dev, "report logical LUNs failed.\n");
1675 return -1;
1676 }
Stephen M. Cameron6df1e952010-02-04 08:42:19 -06001677 *nlogicals = be32_to_cpu(*((__be32 *) logdev->LUNListLength)) / 8;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001678 /* Reject Logicals in excess of our max capability. */
1679 if (*nlogicals > HPSA_MAX_LUN) {
1680 dev_warn(&h->pdev->dev,
1681 "maximum logical LUNs (%d) exceeded. "
1682 "%d LUNs ignored.\n", HPSA_MAX_LUN,
1683 *nlogicals - HPSA_MAX_LUN);
1684 *nlogicals = HPSA_MAX_LUN;
1685 }
1686 if (*nlogicals + *nphysicals > HPSA_MAX_PHYS_LUN) {
1687 dev_warn(&h->pdev->dev,
1688 "maximum logical + physical LUNs (%d) exceeded. "
1689 "%d LUNs ignored.\n", HPSA_MAX_PHYS_LUN,
1690 *nphysicals + *nlogicals - HPSA_MAX_PHYS_LUN);
1691 *nlogicals = HPSA_MAX_PHYS_LUN - *nphysicals;
1692 }
1693 return 0;
1694}
1695
Stephen M. Cameron339b2b12010-02-04 08:42:50 -06001696u8 *figure_lunaddrbytes(struct ctlr_info *h, int raid_ctlr_position, int i,
1697 int nphysicals, int nlogicals, struct ReportLUNdata *physdev_list,
1698 struct ReportLUNdata *logdev_list)
1699{
1700 /* Helper function, figure out where the LUN ID info is coming from
1701 * given index i, lists of physical and logical devices, where in
1702 * the list the raid controller is supposed to appear (first or last)
1703 */
1704
1705 int logicals_start = nphysicals + (raid_ctlr_position == 0);
1706 int last_device = nphysicals + nlogicals + (raid_ctlr_position == 0);
1707
1708 if (i == raid_ctlr_position)
1709 return RAID_CTLR_LUNID;
1710
1711 if (i < logicals_start)
1712 return &physdev_list->LUN[i - (raid_ctlr_position == 0)][0];
1713
1714 if (i < last_device)
1715 return &logdev_list->LUN[i - nphysicals -
1716 (raid_ctlr_position == 0)][0];
1717 BUG();
1718 return NULL;
1719}
1720
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001721static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
1722{
1723 /* the idea here is we could get notified
1724 * that some devices have changed, so we do a report
1725 * physical luns and report logical luns cmd, and adjust
1726 * our list of devices accordingly.
1727 *
1728 * The scsi3addr's of devices won't change so long as the
1729 * adapter is not reset. That means we can rescan and
1730 * tell which devices we already know about, vs. new
1731 * devices, vs. disappearing devices.
1732 */
1733 struct ReportLUNdata *physdev_list = NULL;
1734 struct ReportLUNdata *logdev_list = NULL;
1735 unsigned char *inq_buff = NULL;
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06001736 u32 nphysicals = 0;
1737 u32 nlogicals = 0;
1738 u32 ndev_allocated = 0;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001739 struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice;
1740 int ncurrent = 0;
1741 int reportlunsize = sizeof(*physdev_list) + HPSA_MAX_PHYS_LUN * 8;
1742 int i, nmsa2xxx_enclosures, ndevs_to_allocate;
1743 int bus, target, lun;
Stephen M. Cameron339b2b12010-02-04 08:42:50 -06001744 int raid_ctlr_position;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001745 DECLARE_BITMAP(lunzerobits, HPSA_MAX_TARGETS_PER_CTLR);
1746
1747 currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_SCSI_DEVS_PER_HBA,
1748 GFP_KERNEL);
1749 physdev_list = kzalloc(reportlunsize, GFP_KERNEL);
1750 logdev_list = kzalloc(reportlunsize, GFP_KERNEL);
1751 inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
1752 tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
1753
1754 if (!currentsd || !physdev_list || !logdev_list ||
1755 !inq_buff || !tmpdevice) {
1756 dev_err(&h->pdev->dev, "out of memory\n");
1757 goto out;
1758 }
1759 memset(lunzerobits, 0, sizeof(lunzerobits));
1760
1761 if (hpsa_gather_lun_info(h, reportlunsize, physdev_list, &nphysicals,
1762 logdev_list, &nlogicals))
1763 goto out;
1764
1765 /* We might see up to 32 MSA2xxx enclosures, actually 8 of them
1766 * but each of them 4 times through different paths. The plus 1
1767 * is for the RAID controller.
1768 */
1769 ndevs_to_allocate = nphysicals + nlogicals + MAX_MSA2XXX_ENCLOSURES + 1;
1770
1771 /* Allocate the per device structures */
1772 for (i = 0; i < ndevs_to_allocate; i++) {
1773 currentsd[i] = kzalloc(sizeof(*currentsd[i]), GFP_KERNEL);
1774 if (!currentsd[i]) {
1775 dev_warn(&h->pdev->dev, "out of memory at %s:%d\n",
1776 __FILE__, __LINE__);
1777 goto out;
1778 }
1779 ndev_allocated++;
1780 }
1781
Stephen M. Cameron339b2b12010-02-04 08:42:50 -06001782 if (unlikely(is_scsi_rev_5(h)))
1783 raid_ctlr_position = 0;
1784 else
1785 raid_ctlr_position = nphysicals + nlogicals;
1786
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001787 /* adjust our table of devices */
1788 nmsa2xxx_enclosures = 0;
1789 for (i = 0; i < nphysicals + nlogicals + 1; i++) {
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06001790 u8 *lunaddrbytes;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001791
1792 /* Figure out where the LUN ID info is coming from */
Stephen M. Cameron339b2b12010-02-04 08:42:50 -06001793 lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position,
1794 i, nphysicals, nlogicals, physdev_list, logdev_list);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001795 /* skip masked physical devices. */
Stephen M. Cameron339b2b12010-02-04 08:42:50 -06001796 if (lunaddrbytes[3] & 0xC0 &&
1797 i < nphysicals + (raid_ctlr_position == 0))
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001798 continue;
1799
1800 /* Get device type, vendor, model, device id */
1801 if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice))
1802 continue; /* skip it if we can't talk to it. */
1803 figure_bus_target_lun(h, lunaddrbytes, &bus, &target, &lun,
1804 tmpdevice);
1805 this_device = currentsd[ncurrent];
1806
1807 /*
1808 * For the msa2xxx boxes, we have to insert a LUN 0 which
1809 * doesn't show up in CCISS_REPORT_PHYSICAL data, but there
1810 * is nonetheless an enclosure device there. We have to
1811 * present that otherwise linux won't find anything if
1812 * there is no lun 0.
1813 */
1814 if (add_msa2xxx_enclosure_device(h, tmpdevice, this_device,
1815 lunaddrbytes, bus, target, lun, lunzerobits,
1816 &nmsa2xxx_enclosures)) {
1817 ncurrent++;
1818 this_device = currentsd[ncurrent];
1819 }
1820
1821 *this_device = *tmpdevice;
1822 hpsa_set_bus_target_lun(this_device, bus, target, lun);
1823
1824 switch (this_device->devtype) {
1825 case TYPE_ROM: {
1826 /* We don't *really* support actual CD-ROM devices,
1827 * just "One Button Disaster Recovery" tape drive
1828 * which temporarily pretends to be a CD-ROM drive.
1829 * So we check that the device is really an OBDR tape
1830 * device by checking for "$DR-10" in bytes 43-48 of
1831 * the inquiry data.
1832 */
1833 char obdr_sig[7];
1834#define OBDR_TAPE_SIG "$DR-10"
1835 strncpy(obdr_sig, &inq_buff[43], 6);
1836 obdr_sig[6] = '\0';
1837 if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0)
1838 /* Not OBDR device, ignore it. */
1839 break;
1840 }
1841 ncurrent++;
1842 break;
1843 case TYPE_DISK:
1844 if (i < nphysicals)
1845 break;
1846 ncurrent++;
1847 break;
1848 case TYPE_TAPE:
1849 case TYPE_MEDIUM_CHANGER:
1850 ncurrent++;
1851 break;
1852 case TYPE_RAID:
1853 /* Only present the Smartarray HBA as a RAID controller.
1854 * If it's a RAID controller other than the HBA itself
1855 * (an external RAID controller, MSA500 or similar)
1856 * don't present it.
1857 */
1858 if (!is_hba_lunid(lunaddrbytes))
1859 break;
1860 ncurrent++;
1861 break;
1862 default:
1863 break;
1864 }
1865 if (ncurrent >= HPSA_MAX_SCSI_DEVS_PER_HBA)
1866 break;
1867 }
1868 adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent);
1869out:
1870 kfree(tmpdevice);
1871 for (i = 0; i < ndev_allocated; i++)
1872 kfree(currentsd[i]);
1873 kfree(currentsd);
1874 kfree(inq_buff);
1875 kfree(physdev_list);
1876 kfree(logdev_list);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001877}
1878
1879/* hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci
1880 * dma mapping and fills in the scatter gather entries of the
1881 * hpsa command, cp.
1882 */
Stephen M. Cameron33a2ffc2010-02-25 14:03:27 -06001883static int hpsa_scatter_gather(struct ctlr_info *h,
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001884 struct CommandList *cp,
1885 struct scsi_cmnd *cmd)
1886{
1887 unsigned int len;
1888 struct scatterlist *sg;
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06001889 u64 addr64;
Stephen M. Cameron33a2ffc2010-02-25 14:03:27 -06001890 int use_sg, i, sg_index, chained;
1891 struct SGDescriptor *curr_sg;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001892
Stephen M. Cameron33a2ffc2010-02-25 14:03:27 -06001893 BUG_ON(scsi_sg_count(cmd) > h->maxsgentries);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001894
1895 use_sg = scsi_dma_map(cmd);
1896 if (use_sg < 0)
1897 return use_sg;
1898
1899 if (!use_sg)
1900 goto sglist_finished;
1901
Stephen M. Cameron33a2ffc2010-02-25 14:03:27 -06001902 curr_sg = cp->SG;
1903 chained = 0;
1904 sg_index = 0;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001905 scsi_for_each_sg(cmd, sg, use_sg, i) {
Stephen M. Cameron33a2ffc2010-02-25 14:03:27 -06001906 if (i == h->max_cmd_sg_entries - 1 &&
1907 use_sg > h->max_cmd_sg_entries) {
1908 chained = 1;
1909 curr_sg = h->cmd_sg_list[cp->cmdindex];
1910 sg_index = 0;
1911 }
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06001912 addr64 = (u64) sg_dma_address(sg);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001913 len = sg_dma_len(sg);
Stephen M. Cameron33a2ffc2010-02-25 14:03:27 -06001914 curr_sg->Addr.lower = (u32) (addr64 & 0x0FFFFFFFFULL);
1915 curr_sg->Addr.upper = (u32) ((addr64 >> 32) & 0x0FFFFFFFFULL);
1916 curr_sg->Len = len;
1917 curr_sg->Ext = 0; /* we are not chaining */
1918 curr_sg++;
1919 }
1920
1921 if (use_sg + chained > h->maxSG)
1922 h->maxSG = use_sg + chained;
1923
1924 if (chained) {
1925 cp->Header.SGList = h->max_cmd_sg_entries;
1926 cp->Header.SGTotal = (u16) (use_sg + 1);
1927 hpsa_map_sg_chain_block(h, cp);
1928 return 0;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001929 }
1930
1931sglist_finished:
1932
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06001933 cp->Header.SGList = (u8) use_sg; /* no. SGs contig in this cmd */
1934 cp->Header.SGTotal = (u16) use_sg; /* total sgs in this cmd list */
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001935 return 0;
1936}
1937
1938
Jeff Garzikf2812332010-11-16 02:10:29 -05001939static int hpsa_scsi_queue_command_lck(struct scsi_cmnd *cmd,
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001940 void (*done)(struct scsi_cmnd *))
1941{
1942 struct ctlr_info *h;
1943 struct hpsa_scsi_dev_t *dev;
1944 unsigned char scsi3addr[8];
1945 struct CommandList *c;
1946 unsigned long flags;
1947
1948 /* Get the ptr to our adapter structure out of cmd->host. */
1949 h = sdev_to_hba(cmd->device);
1950 dev = cmd->device->hostdata;
1951 if (!dev) {
1952 cmd->result = DID_NO_CONNECT << 16;
1953 done(cmd);
1954 return 0;
1955 }
1956 memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr));
1957
1958 /* Need a lock as this is being allocated from the pool */
1959 spin_lock_irqsave(&h->lock, flags);
1960 c = cmd_alloc(h);
1961 spin_unlock_irqrestore(&h->lock, flags);
1962 if (c == NULL) { /* trouble... */
1963 dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n");
1964 return SCSI_MLQUEUE_HOST_BUSY;
1965 }
1966
1967 /* Fill in the command list header */
1968
1969 cmd->scsi_done = done; /* save this for use by completion code */
1970
1971 /* save c in case we have to abort it */
1972 cmd->host_scribble = (unsigned char *) c;
1973
1974 c->cmd_type = CMD_SCSI;
1975 c->scsi_cmd = cmd;
1976 c->Header.ReplyQueue = 0; /* unused in simple mode */
1977 memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
Don Brace303932f2010-02-04 08:42:40 -06001978 c->Header.Tag.lower = (c->cmdindex << DIRECT_LOOKUP_SHIFT);
1979 c->Header.Tag.lower |= DIRECT_LOOKUP_BIT;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08001980
1981 /* Fill in the request block... */
1982
1983 c->Request.Timeout = 0;
1984 memset(c->Request.CDB, 0, sizeof(c->Request.CDB));
1985 BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB));
1986 c->Request.CDBLen = cmd->cmd_len;
1987 memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len);
1988 c->Request.Type.Type = TYPE_CMD;
1989 c->Request.Type.Attribute = ATTR_SIMPLE;
1990 switch (cmd->sc_data_direction) {
1991 case DMA_TO_DEVICE:
1992 c->Request.Type.Direction = XFER_WRITE;
1993 break;
1994 case DMA_FROM_DEVICE:
1995 c->Request.Type.Direction = XFER_READ;
1996 break;
1997 case DMA_NONE:
1998 c->Request.Type.Direction = XFER_NONE;
1999 break;
2000 case DMA_BIDIRECTIONAL:
2001 /* This can happen if a buggy application does a scsi passthru
2002 * and sets both inlen and outlen to non-zero. ( see
2003 * ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() )
2004 */
2005
2006 c->Request.Type.Direction = XFER_RSVD;
2007 /* This is technically wrong, and hpsa controllers should
2008 * reject it with CMD_INVALID, which is the most correct
2009 * response, but non-fibre backends appear to let it
2010 * slide by, and give the same results as if this field
2011 * were set correctly. Either way is acceptable for
2012 * our purposes here.
2013 */
2014
2015 break;
2016
2017 default:
2018 dev_err(&h->pdev->dev, "unknown data direction: %d\n",
2019 cmd->sc_data_direction);
2020 BUG();
2021 break;
2022 }
2023
Stephen M. Cameron33a2ffc2010-02-25 14:03:27 -06002024 if (hpsa_scatter_gather(h, c, cmd) < 0) { /* Fill SG list */
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002025 cmd_free(h, c);
2026 return SCSI_MLQUEUE_HOST_BUSY;
2027 }
2028 enqueue_cmd_and_start_io(h, c);
2029 /* the cmd'll come back via intr handler in complete_scsi_command() */
2030 return 0;
2031}
2032
Jeff Garzikf2812332010-11-16 02:10:29 -05002033static DEF_SCSI_QCMD(hpsa_scsi_queue_command)
2034
Stephen M. Camerona08a8472010-02-04 08:43:16 -06002035static void hpsa_scan_start(struct Scsi_Host *sh)
2036{
2037 struct ctlr_info *h = shost_to_hba(sh);
2038 unsigned long flags;
2039
2040 /* wait until any scan already in progress is finished. */
2041 while (1) {
2042 spin_lock_irqsave(&h->scan_lock, flags);
2043 if (h->scan_finished)
2044 break;
2045 spin_unlock_irqrestore(&h->scan_lock, flags);
2046 wait_event(h->scan_wait_queue, h->scan_finished);
2047 /* Note: We don't need to worry about a race between this
2048 * thread and driver unload because the midlayer will
2049 * have incremented the reference count, so unload won't
2050 * happen if we're in here.
2051 */
2052 }
2053 h->scan_finished = 0; /* mark scan as in progress */
2054 spin_unlock_irqrestore(&h->scan_lock, flags);
2055
2056 hpsa_update_scsi_devices(h, h->scsi_host->host_no);
2057
2058 spin_lock_irqsave(&h->scan_lock, flags);
2059 h->scan_finished = 1; /* mark scan as finished. */
2060 wake_up_all(&h->scan_wait_queue);
2061 spin_unlock_irqrestore(&h->scan_lock, flags);
2062}
2063
2064static int hpsa_scan_finished(struct Scsi_Host *sh,
2065 unsigned long elapsed_time)
2066{
2067 struct ctlr_info *h = shost_to_hba(sh);
2068 unsigned long flags;
2069 int finished;
2070
2071 spin_lock_irqsave(&h->scan_lock, flags);
2072 finished = h->scan_finished;
2073 spin_unlock_irqrestore(&h->scan_lock, flags);
2074 return finished;
2075}
2076
Stephen M. Cameron667e23d2010-02-25 14:02:51 -06002077static int hpsa_change_queue_depth(struct scsi_device *sdev,
2078 int qdepth, int reason)
2079{
2080 struct ctlr_info *h = sdev_to_hba(sdev);
2081
2082 if (reason != SCSI_QDEPTH_DEFAULT)
2083 return -ENOTSUPP;
2084
2085 if (qdepth < 1)
2086 qdepth = 1;
2087 else
2088 if (qdepth > h->nr_cmds)
2089 qdepth = h->nr_cmds;
2090 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2091 return sdev->queue_depth;
2092}
2093
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002094static void hpsa_unregister_scsi(struct ctlr_info *h)
2095{
2096 /* we are being forcibly unloaded, and may not refuse. */
2097 scsi_remove_host(h->scsi_host);
2098 scsi_host_put(h->scsi_host);
2099 h->scsi_host = NULL;
2100}
2101
2102static int hpsa_register_scsi(struct ctlr_info *h)
2103{
2104 int rc;
2105
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002106 rc = hpsa_scsi_detect(h);
2107 if (rc != 0)
2108 dev_err(&h->pdev->dev, "hpsa_register_scsi: failed"
2109 " hpsa_scsi_detect(), rc is %d\n", rc);
2110 return rc;
2111}
2112
2113static int wait_for_device_to_become_ready(struct ctlr_info *h,
2114 unsigned char lunaddr[])
2115{
2116 int rc = 0;
2117 int count = 0;
2118 int waittime = 1; /* seconds */
2119 struct CommandList *c;
2120
2121 c = cmd_special_alloc(h);
2122 if (!c) {
2123 dev_warn(&h->pdev->dev, "out of memory in "
2124 "wait_for_device_to_become_ready.\n");
2125 return IO_ERROR;
2126 }
2127
2128 /* Send test unit ready until device ready, or give up. */
2129 while (count < HPSA_TUR_RETRY_LIMIT) {
2130
2131 /* Wait for a bit. do this first, because if we send
2132 * the TUR right away, the reset will just abort it.
2133 */
2134 msleep(1000 * waittime);
2135 count++;
2136
2137 /* Increase wait time with each try, up to a point. */
2138 if (waittime < HPSA_MAX_WAIT_INTERVAL_SECS)
2139 waittime = waittime * 2;
2140
2141 /* Send the Test Unit Ready */
2142 fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, lunaddr, TYPE_CMD);
2143 hpsa_scsi_do_simple_cmd_core(h, c);
2144 /* no unmap needed here because no data xfer. */
2145
2146 if (c->err_info->CommandStatus == CMD_SUCCESS)
2147 break;
2148
2149 if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
2150 c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION &&
2151 (c->err_info->SenseInfo[2] == NO_SENSE ||
2152 c->err_info->SenseInfo[2] == UNIT_ATTENTION))
2153 break;
2154
2155 dev_warn(&h->pdev->dev, "waiting %d secs "
2156 "for device to become ready.\n", waittime);
2157 rc = 1; /* device not ready. */
2158 }
2159
2160 if (rc)
2161 dev_warn(&h->pdev->dev, "giving up on device.\n");
2162 else
2163 dev_warn(&h->pdev->dev, "device is ready.\n");
2164
2165 cmd_special_free(h, c);
2166 return rc;
2167}
2168
2169/* Need at least one of these error handlers to keep ../scsi/hosts.c from
2170 * complaining. Doing a host- or bus-reset can't do anything good here.
2171 */
2172static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
2173{
2174 int rc;
2175 struct ctlr_info *h;
2176 struct hpsa_scsi_dev_t *dev;
2177
2178 /* find the controller to which the command to be aborted was sent */
2179 h = sdev_to_hba(scsicmd->device);
2180 if (h == NULL) /* paranoia */
2181 return FAILED;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002182 dev = scsicmd->device->hostdata;
2183 if (!dev) {
2184 dev_err(&h->pdev->dev, "hpsa_eh_device_reset_handler: "
2185 "device lookup failed.\n");
2186 return FAILED;
2187 }
Stephen M. Camerond416b0c2010-02-04 08:43:21 -06002188 dev_warn(&h->pdev->dev, "resetting device %d:%d:%d:%d\n",
2189 h->scsi_host->host_no, dev->bus, dev->target, dev->lun);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002190 /* send a reset to the SCSI LUN which the command was sent to */
2191 rc = hpsa_send_reset(h, dev->scsi3addr);
2192 if (rc == 0 && wait_for_device_to_become_ready(h, dev->scsi3addr) == 0)
2193 return SUCCESS;
2194
2195 dev_warn(&h->pdev->dev, "resetting device failed.\n");
2196 return FAILED;
2197}
2198
2199/*
2200 * For operations that cannot sleep, a command block is allocated at init,
2201 * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
2202 * which ones are free or in use. Lock must be held when calling this.
2203 * cmd_free() is the complement.
2204 */
2205static struct CommandList *cmd_alloc(struct ctlr_info *h)
2206{
2207 struct CommandList *c;
2208 int i;
2209 union u64bit temp64;
2210 dma_addr_t cmd_dma_handle, err_dma_handle;
2211
2212 do {
2213 i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds);
2214 if (i == h->nr_cmds)
2215 return NULL;
2216 } while (test_and_set_bit
2217 (i & (BITS_PER_LONG - 1),
2218 h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0);
2219 c = h->cmd_pool + i;
2220 memset(c, 0, sizeof(*c));
2221 cmd_dma_handle = h->cmd_pool_dhandle
2222 + i * sizeof(*c);
2223 c->err_info = h->errinfo_pool + i;
2224 memset(c->err_info, 0, sizeof(*c->err_info));
2225 err_dma_handle = h->errinfo_pool_dhandle
2226 + i * sizeof(*c->err_info);
2227 h->nr_allocs++;
2228
2229 c->cmdindex = i;
2230
Stephen M. Cameron9e0fc762011-02-15 15:32:48 -06002231 INIT_LIST_HEAD(&c->list);
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06002232 c->busaddr = (u32) cmd_dma_handle;
2233 temp64.val = (u64) err_dma_handle;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002234 c->ErrDesc.Addr.lower = temp64.val32.lower;
2235 c->ErrDesc.Addr.upper = temp64.val32.upper;
2236 c->ErrDesc.Len = sizeof(*c->err_info);
2237
2238 c->h = h;
2239 return c;
2240}
2241
2242/* For operations that can wait for kmalloc to possibly sleep,
2243 * this routine can be called. Lock need not be held to call
2244 * cmd_special_alloc. cmd_special_free() is the complement.
2245 */
2246static struct CommandList *cmd_special_alloc(struct ctlr_info *h)
2247{
2248 struct CommandList *c;
2249 union u64bit temp64;
2250 dma_addr_t cmd_dma_handle, err_dma_handle;
2251
2252 c = pci_alloc_consistent(h->pdev, sizeof(*c), &cmd_dma_handle);
2253 if (c == NULL)
2254 return NULL;
2255 memset(c, 0, sizeof(*c));
2256
2257 c->cmdindex = -1;
2258
2259 c->err_info = pci_alloc_consistent(h->pdev, sizeof(*c->err_info),
2260 &err_dma_handle);
2261
2262 if (c->err_info == NULL) {
2263 pci_free_consistent(h->pdev,
2264 sizeof(*c), c, cmd_dma_handle);
2265 return NULL;
2266 }
2267 memset(c->err_info, 0, sizeof(*c->err_info));
2268
Stephen M. Cameron9e0fc762011-02-15 15:32:48 -06002269 INIT_LIST_HEAD(&c->list);
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06002270 c->busaddr = (u32) cmd_dma_handle;
2271 temp64.val = (u64) err_dma_handle;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002272 c->ErrDesc.Addr.lower = temp64.val32.lower;
2273 c->ErrDesc.Addr.upper = temp64.val32.upper;
2274 c->ErrDesc.Len = sizeof(*c->err_info);
2275
2276 c->h = h;
2277 return c;
2278}
2279
2280static void cmd_free(struct ctlr_info *h, struct CommandList *c)
2281{
2282 int i;
2283
2284 i = c - h->cmd_pool;
2285 clear_bit(i & (BITS_PER_LONG - 1),
2286 h->cmd_pool_bits + (i / BITS_PER_LONG));
2287 h->nr_frees++;
2288}
2289
2290static void cmd_special_free(struct ctlr_info *h, struct CommandList *c)
2291{
2292 union u64bit temp64;
2293
2294 temp64.val32.lower = c->ErrDesc.Addr.lower;
2295 temp64.val32.upper = c->ErrDesc.Addr.upper;
2296 pci_free_consistent(h->pdev, sizeof(*c->err_info),
2297 c->err_info, (dma_addr_t) temp64.val);
2298 pci_free_consistent(h->pdev, sizeof(*c),
Stephen M. Camerond896f3f2011-01-06 14:47:53 -06002299 c, (dma_addr_t) (c->busaddr & DIRECT_LOOKUP_MASK));
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002300}
2301
2302#ifdef CONFIG_COMPAT
2303
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002304static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg)
2305{
2306 IOCTL32_Command_struct __user *arg32 =
2307 (IOCTL32_Command_struct __user *) arg;
2308 IOCTL_Command_struct arg64;
2309 IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64));
2310 int err;
2311 u32 cp;
2312
Vasiliy Kulikov938abd82011-01-07 10:55:53 -06002313 memset(&arg64, 0, sizeof(arg64));
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002314 err = 0;
2315 err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
2316 sizeof(arg64.LUN_info));
2317 err |= copy_from_user(&arg64.Request, &arg32->Request,
2318 sizeof(arg64.Request));
2319 err |= copy_from_user(&arg64.error_info, &arg32->error_info,
2320 sizeof(arg64.error_info));
2321 err |= get_user(arg64.buf_size, &arg32->buf_size);
2322 err |= get_user(cp, &arg32->buf);
2323 arg64.buf = compat_ptr(cp);
2324 err |= copy_to_user(p, &arg64, sizeof(arg64));
2325
2326 if (err)
2327 return -EFAULT;
2328
Stephen M. Camerone39eeae2010-02-04 08:43:46 -06002329 err = hpsa_ioctl(dev, CCISS_PASSTHRU, (void *)p);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002330 if (err)
2331 return err;
2332 err |= copy_in_user(&arg32->error_info, &p->error_info,
2333 sizeof(arg32->error_info));
2334 if (err)
2335 return -EFAULT;
2336 return err;
2337}
2338
2339static int hpsa_ioctl32_big_passthru(struct scsi_device *dev,
2340 int cmd, void *arg)
2341{
2342 BIG_IOCTL32_Command_struct __user *arg32 =
2343 (BIG_IOCTL32_Command_struct __user *) arg;
2344 BIG_IOCTL_Command_struct arg64;
2345 BIG_IOCTL_Command_struct __user *p =
2346 compat_alloc_user_space(sizeof(arg64));
2347 int err;
2348 u32 cp;
2349
Vasiliy Kulikov938abd82011-01-07 10:55:53 -06002350 memset(&arg64, 0, sizeof(arg64));
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002351 err = 0;
2352 err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
2353 sizeof(arg64.LUN_info));
2354 err |= copy_from_user(&arg64.Request, &arg32->Request,
2355 sizeof(arg64.Request));
2356 err |= copy_from_user(&arg64.error_info, &arg32->error_info,
2357 sizeof(arg64.error_info));
2358 err |= get_user(arg64.buf_size, &arg32->buf_size);
2359 err |= get_user(arg64.malloc_size, &arg32->malloc_size);
2360 err |= get_user(cp, &arg32->buf);
2361 arg64.buf = compat_ptr(cp);
2362 err |= copy_to_user(p, &arg64, sizeof(arg64));
2363
2364 if (err)
2365 return -EFAULT;
2366
Stephen M. Camerone39eeae2010-02-04 08:43:46 -06002367 err = hpsa_ioctl(dev, CCISS_BIG_PASSTHRU, (void *)p);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002368 if (err)
2369 return err;
2370 err |= copy_in_user(&arg32->error_info, &p->error_info,
2371 sizeof(arg32->error_info));
2372 if (err)
2373 return -EFAULT;
2374 return err;
2375}
Stephen M. Cameron71fe75a2010-02-04 08:43:51 -06002376
2377static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg)
2378{
2379 switch (cmd) {
2380 case CCISS_GETPCIINFO:
2381 case CCISS_GETINTINFO:
2382 case CCISS_SETINTINFO:
2383 case CCISS_GETNODENAME:
2384 case CCISS_SETNODENAME:
2385 case CCISS_GETHEARTBEAT:
2386 case CCISS_GETBUSTYPES:
2387 case CCISS_GETFIRMVER:
2388 case CCISS_GETDRIVVER:
2389 case CCISS_REVALIDVOLS:
2390 case CCISS_DEREGDISK:
2391 case CCISS_REGNEWDISK:
2392 case CCISS_REGNEWD:
2393 case CCISS_RESCANDISK:
2394 case CCISS_GETLUNINFO:
2395 return hpsa_ioctl(dev, cmd, arg);
2396
2397 case CCISS_PASSTHRU32:
2398 return hpsa_ioctl32_passthru(dev, cmd, arg);
2399 case CCISS_BIG_PASSTHRU32:
2400 return hpsa_ioctl32_big_passthru(dev, cmd, arg);
2401
2402 default:
2403 return -ENOIOCTLCMD;
2404 }
2405}
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002406#endif
2407
2408static int hpsa_getpciinfo_ioctl(struct ctlr_info *h, void __user *argp)
2409{
2410 struct hpsa_pci_info pciinfo;
2411
2412 if (!argp)
2413 return -EINVAL;
2414 pciinfo.domain = pci_domain_nr(h->pdev->bus);
2415 pciinfo.bus = h->pdev->bus->number;
2416 pciinfo.dev_fn = h->pdev->devfn;
2417 pciinfo.board_id = h->board_id;
2418 if (copy_to_user(argp, &pciinfo, sizeof(pciinfo)))
2419 return -EFAULT;
2420 return 0;
2421}
2422
2423static int hpsa_getdrivver_ioctl(struct ctlr_info *h, void __user *argp)
2424{
2425 DriverVer_type DriverVer;
2426 unsigned char vmaj, vmin, vsubmin;
2427 int rc;
2428
2429 rc = sscanf(HPSA_DRIVER_VERSION, "%hhu.%hhu.%hhu",
2430 &vmaj, &vmin, &vsubmin);
2431 if (rc != 3) {
2432 dev_info(&h->pdev->dev, "driver version string '%s' "
2433 "unrecognized.", HPSA_DRIVER_VERSION);
2434 vmaj = 0;
2435 vmin = 0;
2436 vsubmin = 0;
2437 }
2438 DriverVer = (vmaj << 16) | (vmin << 8) | vsubmin;
2439 if (!argp)
2440 return -EINVAL;
2441 if (copy_to_user(argp, &DriverVer, sizeof(DriverVer_type)))
2442 return -EFAULT;
2443 return 0;
2444}
2445
2446static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
2447{
2448 IOCTL_Command_struct iocommand;
2449 struct CommandList *c;
2450 char *buff = NULL;
2451 union u64bit temp64;
2452
2453 if (!argp)
2454 return -EINVAL;
2455 if (!capable(CAP_SYS_RAWIO))
2456 return -EPERM;
2457 if (copy_from_user(&iocommand, argp, sizeof(iocommand)))
2458 return -EFAULT;
2459 if ((iocommand.buf_size < 1) &&
2460 (iocommand.Request.Type.Direction != XFER_NONE)) {
2461 return -EINVAL;
2462 }
2463 if (iocommand.buf_size > 0) {
2464 buff = kmalloc(iocommand.buf_size, GFP_KERNEL);
2465 if (buff == NULL)
2466 return -EFAULT;
Stephen M. Cameronb03a7772011-01-06 14:47:48 -06002467 if (iocommand.Request.Type.Direction == XFER_WRITE) {
2468 /* Copy the data into the buffer we created */
2469 if (copy_from_user(buff, iocommand.buf,
2470 iocommand.buf_size)) {
2471 kfree(buff);
2472 return -EFAULT;
2473 }
2474 } else {
2475 memset(buff, 0, iocommand.buf_size);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002476 }
Stephen M. Cameronb03a7772011-01-06 14:47:48 -06002477 }
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002478 c = cmd_special_alloc(h);
2479 if (c == NULL) {
2480 kfree(buff);
2481 return -ENOMEM;
2482 }
2483 /* Fill in the command type */
2484 c->cmd_type = CMD_IOCTL_PEND;
2485 /* Fill in Command Header */
2486 c->Header.ReplyQueue = 0; /* unused in simple mode */
2487 if (iocommand.buf_size > 0) { /* buffer to fill */
2488 c->Header.SGList = 1;
2489 c->Header.SGTotal = 1;
2490 } else { /* no buffers to fill */
2491 c->Header.SGList = 0;
2492 c->Header.SGTotal = 0;
2493 }
2494 memcpy(&c->Header.LUN, &iocommand.LUN_info, sizeof(c->Header.LUN));
2495 /* use the kernel address the cmd block for tag */
2496 c->Header.Tag.lower = c->busaddr;
2497
2498 /* Fill in Request block */
2499 memcpy(&c->Request, &iocommand.Request,
2500 sizeof(c->Request));
2501
2502 /* Fill in the scatter gather information */
2503 if (iocommand.buf_size > 0) {
2504 temp64.val = pci_map_single(h->pdev, buff,
2505 iocommand.buf_size, PCI_DMA_BIDIRECTIONAL);
2506 c->SG[0].Addr.lower = temp64.val32.lower;
2507 c->SG[0].Addr.upper = temp64.val32.upper;
2508 c->SG[0].Len = iocommand.buf_size;
2509 c->SG[0].Ext = 0; /* we are not chaining*/
2510 }
2511 hpsa_scsi_do_simple_cmd_core(h, c);
2512 hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL);
2513 check_ioctl_unit_attention(h, c);
2514
2515 /* Copy the error information out */
2516 memcpy(&iocommand.error_info, c->err_info,
2517 sizeof(iocommand.error_info));
2518 if (copy_to_user(argp, &iocommand, sizeof(iocommand))) {
2519 kfree(buff);
2520 cmd_special_free(h, c);
2521 return -EFAULT;
2522 }
Stephen M. Cameronb03a7772011-01-06 14:47:48 -06002523 if (iocommand.Request.Type.Direction == XFER_READ &&
2524 iocommand.buf_size > 0) {
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002525 /* Copy the data out of the buffer we created */
2526 if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) {
2527 kfree(buff);
2528 cmd_special_free(h, c);
2529 return -EFAULT;
2530 }
2531 }
2532 kfree(buff);
2533 cmd_special_free(h, c);
2534 return 0;
2535}
2536
2537static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
2538{
2539 BIG_IOCTL_Command_struct *ioc;
2540 struct CommandList *c;
2541 unsigned char **buff = NULL;
2542 int *buff_size = NULL;
2543 union u64bit temp64;
2544 BYTE sg_used = 0;
2545 int status = 0;
2546 int i;
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06002547 u32 left;
2548 u32 sz;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002549 BYTE __user *data_ptr;
2550
2551 if (!argp)
2552 return -EINVAL;
2553 if (!capable(CAP_SYS_RAWIO))
2554 return -EPERM;
2555 ioc = (BIG_IOCTL_Command_struct *)
2556 kmalloc(sizeof(*ioc), GFP_KERNEL);
2557 if (!ioc) {
2558 status = -ENOMEM;
2559 goto cleanup1;
2560 }
2561 if (copy_from_user(ioc, argp, sizeof(*ioc))) {
2562 status = -EFAULT;
2563 goto cleanup1;
2564 }
2565 if ((ioc->buf_size < 1) &&
2566 (ioc->Request.Type.Direction != XFER_NONE)) {
2567 status = -EINVAL;
2568 goto cleanup1;
2569 }
2570 /* Check kmalloc limits using all SGs */
2571 if (ioc->malloc_size > MAX_KMALLOC_SIZE) {
2572 status = -EINVAL;
2573 goto cleanup1;
2574 }
2575 if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) {
2576 status = -EINVAL;
2577 goto cleanup1;
2578 }
2579 buff = kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL);
2580 if (!buff) {
2581 status = -ENOMEM;
2582 goto cleanup1;
2583 }
2584 buff_size = kmalloc(MAXSGENTRIES * sizeof(int), GFP_KERNEL);
2585 if (!buff_size) {
2586 status = -ENOMEM;
2587 goto cleanup1;
2588 }
2589 left = ioc->buf_size;
2590 data_ptr = ioc->buf;
2591 while (left) {
2592 sz = (left > ioc->malloc_size) ? ioc->malloc_size : left;
2593 buff_size[sg_used] = sz;
2594 buff[sg_used] = kmalloc(sz, GFP_KERNEL);
2595 if (buff[sg_used] == NULL) {
2596 status = -ENOMEM;
2597 goto cleanup1;
2598 }
2599 if (ioc->Request.Type.Direction == XFER_WRITE) {
2600 if (copy_from_user(buff[sg_used], data_ptr, sz)) {
2601 status = -ENOMEM;
2602 goto cleanup1;
2603 }
2604 } else
2605 memset(buff[sg_used], 0, sz);
2606 left -= sz;
2607 data_ptr += sz;
2608 sg_used++;
2609 }
2610 c = cmd_special_alloc(h);
2611 if (c == NULL) {
2612 status = -ENOMEM;
2613 goto cleanup1;
2614 }
2615 c->cmd_type = CMD_IOCTL_PEND;
2616 c->Header.ReplyQueue = 0;
Stephen M. Cameronb03a7772011-01-06 14:47:48 -06002617 c->Header.SGList = c->Header.SGTotal = sg_used;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002618 memcpy(&c->Header.LUN, &ioc->LUN_info, sizeof(c->Header.LUN));
2619 c->Header.Tag.lower = c->busaddr;
2620 memcpy(&c->Request, &ioc->Request, sizeof(c->Request));
2621 if (ioc->buf_size > 0) {
2622 int i;
2623 for (i = 0; i < sg_used; i++) {
2624 temp64.val = pci_map_single(h->pdev, buff[i],
2625 buff_size[i], PCI_DMA_BIDIRECTIONAL);
2626 c->SG[i].Addr.lower = temp64.val32.lower;
2627 c->SG[i].Addr.upper = temp64.val32.upper;
2628 c->SG[i].Len = buff_size[i];
2629 /* we are not chaining */
2630 c->SG[i].Ext = 0;
2631 }
2632 }
2633 hpsa_scsi_do_simple_cmd_core(h, c);
Stephen M. Cameronb03a7772011-01-06 14:47:48 -06002634 if (sg_used)
2635 hpsa_pci_unmap(h->pdev, c, sg_used, PCI_DMA_BIDIRECTIONAL);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002636 check_ioctl_unit_attention(h, c);
2637 /* Copy the error information out */
2638 memcpy(&ioc->error_info, c->err_info, sizeof(ioc->error_info));
2639 if (copy_to_user(argp, ioc, sizeof(*ioc))) {
2640 cmd_special_free(h, c);
2641 status = -EFAULT;
2642 goto cleanup1;
2643 }
Stephen M. Cameronb03a7772011-01-06 14:47:48 -06002644 if (ioc->Request.Type.Direction == XFER_READ && ioc->buf_size > 0) {
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002645 /* Copy the data out of the buffer we created */
2646 BYTE __user *ptr = ioc->buf;
2647 for (i = 0; i < sg_used; i++) {
2648 if (copy_to_user(ptr, buff[i], buff_size[i])) {
2649 cmd_special_free(h, c);
2650 status = -EFAULT;
2651 goto cleanup1;
2652 }
2653 ptr += buff_size[i];
2654 }
2655 }
2656 cmd_special_free(h, c);
2657 status = 0;
2658cleanup1:
2659 if (buff) {
2660 for (i = 0; i < sg_used; i++)
2661 kfree(buff[i]);
2662 kfree(buff);
2663 }
2664 kfree(buff_size);
2665 kfree(ioc);
2666 return status;
2667}
2668
2669static void check_ioctl_unit_attention(struct ctlr_info *h,
2670 struct CommandList *c)
2671{
2672 if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
2673 c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION)
2674 (void) check_for_unit_attention(h, c);
2675}
2676/*
2677 * ioctl
2678 */
2679static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg)
2680{
2681 struct ctlr_info *h;
2682 void __user *argp = (void __user *)arg;
2683
2684 h = sdev_to_hba(dev);
2685
2686 switch (cmd) {
2687 case CCISS_DEREGDISK:
2688 case CCISS_REGNEWDISK:
2689 case CCISS_REGNEWD:
Stephen M. Camerona08a8472010-02-04 08:43:16 -06002690 hpsa_scan_start(h->scsi_host);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002691 return 0;
2692 case CCISS_GETPCIINFO:
2693 return hpsa_getpciinfo_ioctl(h, argp);
2694 case CCISS_GETDRIVVER:
2695 return hpsa_getdrivver_ioctl(h, argp);
2696 case CCISS_PASSTHRU:
2697 return hpsa_passthru_ioctl(h, argp);
2698 case CCISS_BIG_PASSTHRU:
2699 return hpsa_big_passthru_ioctl(h, argp);
2700 default:
2701 return -ENOTTY;
2702 }
2703}
2704
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06002705static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
2706 void *buff, size_t size, u8 page_code, unsigned char *scsi3addr,
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002707 int cmd_type)
2708{
2709 int pci_dir = XFER_NONE;
2710
2711 c->cmd_type = CMD_IOCTL_PEND;
2712 c->Header.ReplyQueue = 0;
2713 if (buff != NULL && size > 0) {
2714 c->Header.SGList = 1;
2715 c->Header.SGTotal = 1;
2716 } else {
2717 c->Header.SGList = 0;
2718 c->Header.SGTotal = 0;
2719 }
2720 c->Header.Tag.lower = c->busaddr;
2721 memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8);
2722
2723 c->Request.Type.Type = cmd_type;
2724 if (cmd_type == TYPE_CMD) {
2725 switch (cmd) {
2726 case HPSA_INQUIRY:
2727 /* are we trying to read a vital product page */
2728 if (page_code != 0) {
2729 c->Request.CDB[1] = 0x01;
2730 c->Request.CDB[2] = page_code;
2731 }
2732 c->Request.CDBLen = 6;
2733 c->Request.Type.Attribute = ATTR_SIMPLE;
2734 c->Request.Type.Direction = XFER_READ;
2735 c->Request.Timeout = 0;
2736 c->Request.CDB[0] = HPSA_INQUIRY;
2737 c->Request.CDB[4] = size & 0xFF;
2738 break;
2739 case HPSA_REPORT_LOG:
2740 case HPSA_REPORT_PHYS:
2741 /* Talking to controller so It's a physical command
2742 mode = 00 target = 0. Nothing to write.
2743 */
2744 c->Request.CDBLen = 12;
2745 c->Request.Type.Attribute = ATTR_SIMPLE;
2746 c->Request.Type.Direction = XFER_READ;
2747 c->Request.Timeout = 0;
2748 c->Request.CDB[0] = cmd;
2749 c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */
2750 c->Request.CDB[7] = (size >> 16) & 0xFF;
2751 c->Request.CDB[8] = (size >> 8) & 0xFF;
2752 c->Request.CDB[9] = size & 0xFF;
2753 break;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002754 case HPSA_CACHE_FLUSH:
2755 c->Request.CDBLen = 12;
2756 c->Request.Type.Attribute = ATTR_SIMPLE;
2757 c->Request.Type.Direction = XFER_WRITE;
2758 c->Request.Timeout = 0;
2759 c->Request.CDB[0] = BMIC_WRITE;
2760 c->Request.CDB[6] = BMIC_CACHE_FLUSH;
2761 break;
2762 case TEST_UNIT_READY:
2763 c->Request.CDBLen = 6;
2764 c->Request.Type.Attribute = ATTR_SIMPLE;
2765 c->Request.Type.Direction = XFER_NONE;
2766 c->Request.Timeout = 0;
2767 break;
2768 default:
2769 dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd);
2770 BUG();
2771 return;
2772 }
2773 } else if (cmd_type == TYPE_MSG) {
2774 switch (cmd) {
2775
2776 case HPSA_DEVICE_RESET_MSG:
2777 c->Request.CDBLen = 16;
2778 c->Request.Type.Type = 1; /* It is a MSG not a CMD */
2779 c->Request.Type.Attribute = ATTR_SIMPLE;
2780 c->Request.Type.Direction = XFER_NONE;
2781 c->Request.Timeout = 0; /* Don't time out */
2782 c->Request.CDB[0] = 0x01; /* RESET_MSG is 0x01 */
2783 c->Request.CDB[1] = 0x03; /* Reset target above */
2784 /* If bytes 4-7 are zero, it means reset the */
2785 /* LunID device */
2786 c->Request.CDB[4] = 0x00;
2787 c->Request.CDB[5] = 0x00;
2788 c->Request.CDB[6] = 0x00;
2789 c->Request.CDB[7] = 0x00;
2790 break;
2791
2792 default:
2793 dev_warn(&h->pdev->dev, "unknown message type %d\n",
2794 cmd);
2795 BUG();
2796 }
2797 } else {
2798 dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type);
2799 BUG();
2800 }
2801
2802 switch (c->Request.Type.Direction) {
2803 case XFER_READ:
2804 pci_dir = PCI_DMA_FROMDEVICE;
2805 break;
2806 case XFER_WRITE:
2807 pci_dir = PCI_DMA_TODEVICE;
2808 break;
2809 case XFER_NONE:
2810 pci_dir = PCI_DMA_NONE;
2811 break;
2812 default:
2813 pci_dir = PCI_DMA_BIDIRECTIONAL;
2814 }
2815
2816 hpsa_map_one(h->pdev, c, buff, size, pci_dir);
2817
2818 return;
2819}
2820
2821/*
2822 * Map (physical) PCI mem into (virtual) kernel space
2823 */
2824static void __iomem *remap_pci_mem(ulong base, ulong size)
2825{
2826 ulong page_base = ((ulong) base) & PAGE_MASK;
2827 ulong page_offs = ((ulong) base) - page_base;
2828 void __iomem *page_remapped = ioremap(page_base, page_offs + size);
2829
2830 return page_remapped ? (page_remapped + page_offs) : NULL;
2831}
2832
2833/* Takes cmds off the submission queue and sends them to the hardware,
2834 * then puts them on the queue of cmds waiting for completion.
2835 */
2836static void start_io(struct ctlr_info *h)
2837{
2838 struct CommandList *c;
2839
Stephen M. Cameron9e0fc762011-02-15 15:32:48 -06002840 while (!list_empty(&h->reqQ)) {
2841 c = list_entry(h->reqQ.next, struct CommandList, list);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002842 /* can't do anything if fifo is full */
2843 if ((h->access.fifo_full(h))) {
2844 dev_warn(&h->pdev->dev, "fifo full\n");
2845 break;
2846 }
2847
2848 /* Get the first entry from the Request Q */
2849 removeQ(c);
2850 h->Qdepth--;
2851
2852 /* Tell the controller execute command */
2853 h->access.submit_command(h, c);
2854
2855 /* Put job onto the completed Q */
2856 addQ(&h->cmpQ, c);
2857 }
2858}
2859
2860static inline unsigned long get_next_completion(struct ctlr_info *h)
2861{
2862 return h->access.command_completed(h);
2863}
2864
Stephen M. Cameron900c5442010-02-04 08:42:35 -06002865static inline bool interrupt_pending(struct ctlr_info *h)
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002866{
2867 return h->access.intr_pending(h);
2868}
2869
2870static inline long interrupt_not_for_us(struct ctlr_info *h)
2871{
Stephen M. Cameron10f66012010-06-16 13:51:50 -05002872 return (h->access.intr_pending(h) == 0) ||
2873 (h->interrupts_enabled == 0);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002874}
2875
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06002876static inline int bad_tag(struct ctlr_info *h, u32 tag_index,
2877 u32 raw_tag)
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002878{
2879 if (unlikely(tag_index >= h->nr_cmds)) {
2880 dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag);
2881 return 1;
2882 }
2883 return 0;
2884}
2885
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06002886static inline void finish_cmd(struct CommandList *c, u32 raw_tag)
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002887{
2888 removeQ(c);
2889 if (likely(c->cmd_type == CMD_SCSI))
2890 complete_scsi_command(c, 0, raw_tag);
2891 else if (c->cmd_type == CMD_IOCTL_PEND)
2892 complete(c->waiting);
2893}
2894
Stephen M. Camerona104c992010-02-04 08:42:24 -06002895static inline u32 hpsa_tag_contains_index(u32 tag)
2896{
Stephen M. Camerona104c992010-02-04 08:42:24 -06002897 return tag & DIRECT_LOOKUP_BIT;
2898}
2899
2900static inline u32 hpsa_tag_to_index(u32 tag)
2901{
Stephen M. Camerona104c992010-02-04 08:42:24 -06002902 return tag >> DIRECT_LOOKUP_SHIFT;
2903}
2904
2905static inline u32 hpsa_tag_discard_error_bits(u32 tag)
2906{
2907#define HPSA_ERROR_BITS 0x03
2908 return tag & ~HPSA_ERROR_BITS;
2909}
2910
Don Brace303932f2010-02-04 08:42:40 -06002911/* process completion of an indexed ("direct lookup") command */
2912static inline u32 process_indexed_cmd(struct ctlr_info *h,
2913 u32 raw_tag)
2914{
2915 u32 tag_index;
2916 struct CommandList *c;
2917
2918 tag_index = hpsa_tag_to_index(raw_tag);
2919 if (bad_tag(h, tag_index, raw_tag))
2920 return next_command(h);
2921 c = h->cmd_pool + tag_index;
2922 finish_cmd(c, raw_tag);
2923 return next_command(h);
2924}
2925
2926/* process completion of a non-indexed command */
2927static inline u32 process_nonindexed_cmd(struct ctlr_info *h,
2928 u32 raw_tag)
2929{
2930 u32 tag;
2931 struct CommandList *c = NULL;
Don Brace303932f2010-02-04 08:42:40 -06002932
2933 tag = hpsa_tag_discard_error_bits(raw_tag);
Stephen M. Cameron9e0fc762011-02-15 15:32:48 -06002934 list_for_each_entry(c, &h->cmpQ, list) {
Don Brace303932f2010-02-04 08:42:40 -06002935 if ((c->busaddr & 0xFFFFFFE0) == (tag & 0xFFFFFFE0)) {
2936 finish_cmd(c, raw_tag);
2937 return next_command(h);
2938 }
2939 }
2940 bad_tag(h, h->nr_cmds + 1, raw_tag);
2941 return next_command(h);
2942}
2943
Stephen M. Cameron10f66012010-06-16 13:51:50 -05002944static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id)
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002945{
2946 struct ctlr_info *h = dev_id;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002947 unsigned long flags;
Don Brace303932f2010-02-04 08:42:40 -06002948 u32 raw_tag;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002949
2950 if (interrupt_not_for_us(h))
2951 return IRQ_NONE;
2952 spin_lock_irqsave(&h->lock, flags);
Stephen M. Cameron10f66012010-06-16 13:51:50 -05002953 while (interrupt_pending(h)) {
2954 raw_tag = get_next_completion(h);
2955 while (raw_tag != FIFO_EMPTY) {
2956 if (hpsa_tag_contains_index(raw_tag))
2957 raw_tag = process_indexed_cmd(h, raw_tag);
2958 else
2959 raw_tag = process_nonindexed_cmd(h, raw_tag);
2960 }
2961 }
2962 spin_unlock_irqrestore(&h->lock, flags);
2963 return IRQ_HANDLED;
2964}
2965
2966static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id)
2967{
2968 struct ctlr_info *h = dev_id;
2969 unsigned long flags;
2970 u32 raw_tag;
2971
2972 spin_lock_irqsave(&h->lock, flags);
Don Brace303932f2010-02-04 08:42:40 -06002973 raw_tag = get_next_completion(h);
2974 while (raw_tag != FIFO_EMPTY) {
2975 if (hpsa_tag_contains_index(raw_tag))
2976 raw_tag = process_indexed_cmd(h, raw_tag);
2977 else
2978 raw_tag = process_nonindexed_cmd(h, raw_tag);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002979 }
2980 spin_unlock_irqrestore(&h->lock, flags);
2981 return IRQ_HANDLED;
2982}
2983
Stephen M. Cameronf0edafc2010-02-25 14:02:56 -06002984/* Send a message CDB to the firmware. */
Stephen M. Cameronedd16362009-12-08 14:09:11 -08002985static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
2986 unsigned char type)
2987{
2988 struct Command {
2989 struct CommandListHeader CommandHeader;
2990 struct RequestBlock Request;
2991 struct ErrDescriptor ErrorDescriptor;
2992 };
2993 struct Command *cmd;
2994 static const size_t cmd_sz = sizeof(*cmd) +
2995 sizeof(cmd->ErrorDescriptor);
2996 dma_addr_t paddr64;
2997 uint32_t paddr32, tag;
2998 void __iomem *vaddr;
2999 int i, err;
3000
3001 vaddr = pci_ioremap_bar(pdev, 0);
3002 if (vaddr == NULL)
3003 return -ENOMEM;
3004
3005 /* The Inbound Post Queue only accepts 32-bit physical addresses for the
3006 * CCISS commands, so they must be allocated from the lower 4GiB of
3007 * memory.
3008 */
3009 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
3010 if (err) {
3011 iounmap(vaddr);
3012 return -ENOMEM;
3013 }
3014
3015 cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64);
3016 if (cmd == NULL) {
3017 iounmap(vaddr);
3018 return -ENOMEM;
3019 }
3020
3021 /* This must fit, because of the 32-bit consistent DMA mask. Also,
3022 * although there's no guarantee, we assume that the address is at
3023 * least 4-byte aligned (most likely, it's page-aligned).
3024 */
3025 paddr32 = paddr64;
3026
3027 cmd->CommandHeader.ReplyQueue = 0;
3028 cmd->CommandHeader.SGList = 0;
3029 cmd->CommandHeader.SGTotal = 0;
3030 cmd->CommandHeader.Tag.lower = paddr32;
3031 cmd->CommandHeader.Tag.upper = 0;
3032 memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8);
3033
3034 cmd->Request.CDBLen = 16;
3035 cmd->Request.Type.Type = TYPE_MSG;
3036 cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE;
3037 cmd->Request.Type.Direction = XFER_NONE;
3038 cmd->Request.Timeout = 0; /* Don't time out */
3039 cmd->Request.CDB[0] = opcode;
3040 cmd->Request.CDB[1] = type;
3041 memset(&cmd->Request.CDB[2], 0, 14); /* rest of the CDB is reserved */
3042 cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(*cmd);
3043 cmd->ErrorDescriptor.Addr.upper = 0;
3044 cmd->ErrorDescriptor.Len = sizeof(struct ErrorInfo);
3045
3046 writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET);
3047
3048 for (i = 0; i < HPSA_MSG_SEND_RETRY_LIMIT; i++) {
3049 tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
Stephen M. Camerona104c992010-02-04 08:42:24 -06003050 if (hpsa_tag_discard_error_bits(tag) == paddr32)
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003051 break;
3052 msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS);
3053 }
3054
3055 iounmap(vaddr);
3056
3057 /* we leak the DMA buffer here ... no choice since the controller could
3058 * still complete the command.
3059 */
3060 if (i == HPSA_MSG_SEND_RETRY_LIMIT) {
3061 dev_err(&pdev->dev, "controller message %02x:%02x timed out\n",
3062 opcode, type);
3063 return -ETIMEDOUT;
3064 }
3065
3066 pci_free_consistent(pdev, cmd_sz, cmd, paddr64);
3067
3068 if (tag & HPSA_ERROR_BIT) {
3069 dev_err(&pdev->dev, "controller message %02x:%02x failed\n",
3070 opcode, type);
3071 return -EIO;
3072 }
3073
3074 dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n",
3075 opcode, type);
3076 return 0;
3077}
3078
3079#define hpsa_soft_reset_controller(p) hpsa_message(p, 1, 0)
3080#define hpsa_noop(p) hpsa_message(p, 3, 0)
3081
Stephen M. Cameron1df85522010-06-16 13:51:40 -05003082static int hpsa_controller_hard_reset(struct pci_dev *pdev,
3083 void * __iomem vaddr, bool use_doorbell)
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003084{
Stephen M. Cameron1df85522010-06-16 13:51:40 -05003085 u16 pmcsr;
3086 int pos;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003087
Stephen M. Cameron1df85522010-06-16 13:51:40 -05003088 if (use_doorbell) {
3089 /* For everything after the P600, the PCI power state method
3090 * of resetting the controller doesn't work, so we have this
3091 * other way using the doorbell register.
3092 */
3093 dev_info(&pdev->dev, "using doorbell to reset controller\n");
3094 writel(DOORBELL_CTLR_RESET, vaddr + SA5_DOORBELL);
3095 msleep(1000);
3096 } else { /* Try to do it the PCI power state way */
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003097
Stephen M. Cameron1df85522010-06-16 13:51:40 -05003098 /* Quoting from the Open CISS Specification: "The Power
3099 * Management Control/Status Register (CSR) controls the power
3100 * state of the device. The normal operating state is D0,
3101 * CSR=00h. The software off state is D3, CSR=03h. To reset
3102 * the controller, place the interface device in D3 then to D0,
3103 * this causes a secondary PCI reset which will reset the
3104 * controller." */
3105
3106 pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
3107 if (pos == 0) {
3108 dev_err(&pdev->dev,
3109 "hpsa_reset_controller: "
3110 "PCI PM not supported\n");
3111 return -ENODEV;
3112 }
3113 dev_info(&pdev->dev, "using PCI PM to reset controller\n");
3114 /* enter the D3hot power management state */
3115 pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
3116 pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
3117 pmcsr |= PCI_D3hot;
3118 pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
3119
3120 msleep(500);
3121
3122 /* enter the D0 power management state */
3123 pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
3124 pmcsr |= PCI_D0;
3125 pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
3126
3127 msleep(500);
3128 }
3129 return 0;
3130}
3131
3132/* This does a hard reset of the controller using PCI power management
3133 * states or the using the doorbell register.
3134 */
3135static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
3136{
Stephen M. Cameron1df85522010-06-16 13:51:40 -05003137 u64 cfg_offset;
3138 u32 cfg_base_addr;
3139 u64 cfg_base_addr_index;
3140 void __iomem *vaddr;
3141 unsigned long paddr;
3142 u32 misc_fw_support, active_transport;
Stephen M. Cameron270d05d2011-01-06 14:48:08 -06003143 int rc;
Stephen M. Cameron1df85522010-06-16 13:51:40 -05003144 struct CfgTable __iomem *cfgtable;
3145 bool use_doorbell;
Stephen M. Cameron18867652010-06-16 13:51:45 -05003146 u32 board_id;
Stephen M. Cameron270d05d2011-01-06 14:48:08 -06003147 u16 command_register;
Stephen M. Cameron1df85522010-06-16 13:51:40 -05003148
3149 /* For controllers as old as the P600, this is very nearly
3150 * the same thing as
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003151 *
3152 * pci_save_state(pci_dev);
3153 * pci_set_power_state(pci_dev, PCI_D3hot);
3154 * pci_set_power_state(pci_dev, PCI_D0);
3155 * pci_restore_state(pci_dev);
3156 *
Stephen M. Cameron1df85522010-06-16 13:51:40 -05003157 * For controllers newer than the P600, the pci power state
3158 * method of resetting doesn't work so we have another way
3159 * using the doorbell register.
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003160 */
Stephen M. Cameron18867652010-06-16 13:51:45 -05003161
3162 /* Exclude 640x boards. These are two pci devices in one slot
3163 * which share a battery backed cache module. One controls the
3164 * cache, the other accesses the cache through the one that controls
3165 * it. If we reset the one controlling the cache, the other will
3166 * likely not be happy. Just forbid resetting this conjoined mess.
3167 * The 640x isn't really supported by hpsa anyway.
3168 */
Stephen M. Cameron25c1e562011-01-06 14:48:18 -06003169 rc = hpsa_lookup_board_id(pdev, &board_id);
3170 if (rc < 0) {
3171 dev_warn(&pdev->dev, "Not resetting device.\n");
3172 return -ENODEV;
3173 }
Stephen M. Cameron18867652010-06-16 13:51:45 -05003174 if (board_id == 0x409C0E11 || board_id == 0x409D0E11)
3175 return -ENOTSUPP;
3176
Stephen M. Cameron270d05d2011-01-06 14:48:08 -06003177 /* Save the PCI command register */
3178 pci_read_config_word(pdev, 4, &command_register);
3179 /* Turn the board off. This is so that later pci_restore_state()
3180 * won't turn the board on before the rest of config space is ready.
3181 */
3182 pci_disable_device(pdev);
3183 pci_save_state(pdev);
Stephen M. Cameron1df85522010-06-16 13:51:40 -05003184
3185 /* find the first memory BAR, so we can find the cfg table */
3186 rc = hpsa_pci_find_memory_BAR(pdev, &paddr);
3187 if (rc)
3188 return rc;
3189 vaddr = remap_pci_mem(paddr, 0x250);
3190 if (!vaddr)
3191 return -ENOMEM;
3192
3193 /* find cfgtable in order to check if reset via doorbell is supported */
3194 rc = hpsa_find_cfg_addrs(pdev, vaddr, &cfg_base_addr,
3195 &cfg_base_addr_index, &cfg_offset);
3196 if (rc)
3197 goto unmap_vaddr;
3198 cfgtable = remap_pci_mem(pci_resource_start(pdev,
3199 cfg_base_addr_index) + cfg_offset, sizeof(*cfgtable));
3200 if (!cfgtable) {
3201 rc = -ENOMEM;
3202 goto unmap_vaddr;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003203 }
3204
Stephen M. Cameron1df85522010-06-16 13:51:40 -05003205 /* If reset via doorbell register is supported, use that. */
3206 misc_fw_support = readl(&cfgtable->misc_fw_support);
3207 use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003208
Stephen M. Cameron1df85522010-06-16 13:51:40 -05003209 rc = hpsa_controller_hard_reset(pdev, vaddr, use_doorbell);
3210 if (rc)
3211 goto unmap_cfgtable;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003212
Stephen M. Cameron270d05d2011-01-06 14:48:08 -06003213 pci_restore_state(pdev);
3214 rc = pci_enable_device(pdev);
3215 if (rc) {
3216 dev_warn(&pdev->dev, "failed to enable device.\n");
3217 goto unmap_cfgtable;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003218 }
Stephen M. Cameron270d05d2011-01-06 14:48:08 -06003219 pci_write_config_word(pdev, 4, command_register);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003220
Stephen M. Cameron1df85522010-06-16 13:51:40 -05003221 /* Some devices (notably the HP Smart Array 5i Controller)
3222 need a little pause here */
3223 msleep(HPSA_POST_RESET_PAUSE_MSECS);
3224
Stephen M. Cameronfe5389c2011-01-06 14:48:03 -06003225 /* Wait for board to become not ready, then ready. */
3226 dev_info(&pdev->dev, "Waiting for board to become ready.\n");
3227 rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_NOT_READY);
3228 if (rc)
3229 dev_warn(&pdev->dev,
3230 "failed waiting for board to become not ready\n");
3231 rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_READY);
3232 if (rc) {
3233 dev_warn(&pdev->dev,
3234 "failed waiting for board to become ready\n");
3235 goto unmap_cfgtable;
3236 }
3237 dev_info(&pdev->dev, "board ready.\n");
3238
Stephen M. Cameron1df85522010-06-16 13:51:40 -05003239 /* Controller should be in simple mode at this point. If it's not,
3240 * It means we're on one of those controllers which doesn't support
3241 * the doorbell reset method and on which the PCI power management reset
3242 * method doesn't work (P800, for example.)
3243 * In those cases, pretend the reset worked and hope for the best.
3244 */
3245 active_transport = readl(&cfgtable->TransportActive);
3246 if (active_transport & PERFORMANT_MODE) {
3247 dev_warn(&pdev->dev, "Unable to successfully reset controller,"
3248 " proceeding anyway.\n");
3249 rc = -ENOTSUPP;
3250 }
3251
3252unmap_cfgtable:
3253 iounmap(cfgtable);
3254
3255unmap_vaddr:
3256 iounmap(vaddr);
3257 return rc;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003258}
3259
3260/*
3261 * We cannot read the structure directly, for portability we must use
3262 * the io functions.
3263 * This is for debug only.
3264 */
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003265static void print_cfg_table(struct device *dev, struct CfgTable *tb)
3266{
Stephen M. Cameron58f86652010-05-27 15:13:58 -05003267#ifdef HPSA_DEBUG
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003268 int i;
3269 char temp_name[17];
3270
3271 dev_info(dev, "Controller Configuration information\n");
3272 dev_info(dev, "------------------------------------\n");
3273 for (i = 0; i < 4; i++)
3274 temp_name[i] = readb(&(tb->Signature[i]));
3275 temp_name[4] = '\0';
3276 dev_info(dev, " Signature = %s\n", temp_name);
3277 dev_info(dev, " Spec Number = %d\n", readl(&(tb->SpecValence)));
3278 dev_info(dev, " Transport methods supported = 0x%x\n",
3279 readl(&(tb->TransportSupport)));
3280 dev_info(dev, " Transport methods active = 0x%x\n",
3281 readl(&(tb->TransportActive)));
3282 dev_info(dev, " Requested transport Method = 0x%x\n",
3283 readl(&(tb->HostWrite.TransportRequest)));
3284 dev_info(dev, " Coalesce Interrupt Delay = 0x%x\n",
3285 readl(&(tb->HostWrite.CoalIntDelay)));
3286 dev_info(dev, " Coalesce Interrupt Count = 0x%x\n",
3287 readl(&(tb->HostWrite.CoalIntCount)));
3288 dev_info(dev, " Max outstanding commands = 0x%d\n",
3289 readl(&(tb->CmdsOutMax)));
3290 dev_info(dev, " Bus Types = 0x%x\n", readl(&(tb->BusTypes)));
3291 for (i = 0; i < 16; i++)
3292 temp_name[i] = readb(&(tb->ServerName[i]));
3293 temp_name[16] = '\0';
3294 dev_info(dev, " Server Name = %s\n", temp_name);
3295 dev_info(dev, " Heartbeat Counter = 0x%x\n\n\n",
3296 readl(&(tb->HeartBeat)));
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003297#endif /* HPSA_DEBUG */
Stephen M. Cameron58f86652010-05-27 15:13:58 -05003298}
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003299
3300static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
3301{
3302 int i, offset, mem_type, bar_type;
3303
3304 if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */
3305 return 0;
3306 offset = 0;
3307 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
3308 bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE;
3309 if (bar_type == PCI_BASE_ADDRESS_SPACE_IO)
3310 offset += 4;
3311 else {
3312 mem_type = pci_resource_flags(pdev, i) &
3313 PCI_BASE_ADDRESS_MEM_TYPE_MASK;
3314 switch (mem_type) {
3315 case PCI_BASE_ADDRESS_MEM_TYPE_32:
3316 case PCI_BASE_ADDRESS_MEM_TYPE_1M:
3317 offset += 4; /* 32 bit */
3318 break;
3319 case PCI_BASE_ADDRESS_MEM_TYPE_64:
3320 offset += 8;
3321 break;
3322 default: /* reserved in PCI 2.2 */
3323 dev_warn(&pdev->dev,
3324 "base address is invalid\n");
3325 return -1;
3326 break;
3327 }
3328 }
3329 if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0)
3330 return i + 1;
3331 }
3332 return -1;
3333}
3334
3335/* If MSI/MSI-X is supported by the kernel we will try to enable it on
3336 * controllers that are capable. If not, we use IO-APIC mode.
3337 */
3338
Stephen M. Cameron6b3f4c52010-05-27 15:13:02 -05003339static void __devinit hpsa_interrupt_mode(struct ctlr_info *h)
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003340{
3341#ifdef CONFIG_PCI_MSI
3342 int err;
3343 struct msix_entry hpsa_msix_entries[4] = { {0, 0}, {0, 1},
3344 {0, 2}, {0, 3}
3345 };
3346
3347 /* Some boards advertise MSI but don't really support it */
Stephen M. Cameron6b3f4c52010-05-27 15:13:02 -05003348 if ((h->board_id == 0x40700E11) || (h->board_id == 0x40800E11) ||
3349 (h->board_id == 0x40820E11) || (h->board_id == 0x40830E11))
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003350 goto default_int_mode;
Stephen M. Cameron55c06c72010-05-27 15:12:46 -05003351 if (pci_find_capability(h->pdev, PCI_CAP_ID_MSIX)) {
3352 dev_info(&h->pdev->dev, "MSIX\n");
3353 err = pci_enable_msix(h->pdev, hpsa_msix_entries, 4);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003354 if (!err) {
3355 h->intr[0] = hpsa_msix_entries[0].vector;
3356 h->intr[1] = hpsa_msix_entries[1].vector;
3357 h->intr[2] = hpsa_msix_entries[2].vector;
3358 h->intr[3] = hpsa_msix_entries[3].vector;
3359 h->msix_vector = 1;
3360 return;
3361 }
3362 if (err > 0) {
Stephen M. Cameron55c06c72010-05-27 15:12:46 -05003363 dev_warn(&h->pdev->dev, "only %d MSI-X vectors "
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003364 "available\n", err);
3365 goto default_int_mode;
3366 } else {
Stephen M. Cameron55c06c72010-05-27 15:12:46 -05003367 dev_warn(&h->pdev->dev, "MSI-X init failed %d\n",
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003368 err);
3369 goto default_int_mode;
3370 }
3371 }
Stephen M. Cameron55c06c72010-05-27 15:12:46 -05003372 if (pci_find_capability(h->pdev, PCI_CAP_ID_MSI)) {
3373 dev_info(&h->pdev->dev, "MSI\n");
3374 if (!pci_enable_msi(h->pdev))
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003375 h->msi_vector = 1;
3376 else
Stephen M. Cameron55c06c72010-05-27 15:12:46 -05003377 dev_warn(&h->pdev->dev, "MSI init failed\n");
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003378 }
3379default_int_mode:
3380#endif /* CONFIG_PCI_MSI */
3381 /* if we get here we're going to use the default interrupt mode */
Stephen M. Cameron55c06c72010-05-27 15:12:46 -05003382 h->intr[PERF_MODE_INT] = h->pdev->irq;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003383}
3384
Stephen M. Camerone5c880d2010-05-27 15:12:52 -05003385static int __devinit hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id)
3386{
3387 int i;
3388 u32 subsystem_vendor_id, subsystem_device_id;
3389
3390 subsystem_vendor_id = pdev->subsystem_vendor;
3391 subsystem_device_id = pdev->subsystem_device;
3392 *board_id = ((subsystem_device_id << 16) & 0xffff0000) |
3393 subsystem_vendor_id;
3394
3395 for (i = 0; i < ARRAY_SIZE(products); i++)
3396 if (*board_id == products[i].board_id)
3397 return i;
3398
Stephen M. Cameron6798cc02010-06-16 13:51:20 -05003399 if ((subsystem_vendor_id != PCI_VENDOR_ID_HP &&
3400 subsystem_vendor_id != PCI_VENDOR_ID_COMPAQ) ||
3401 !hpsa_allow_any) {
Stephen M. Camerone5c880d2010-05-27 15:12:52 -05003402 dev_warn(&pdev->dev, "unrecognized board ID: "
3403 "0x%08x, ignoring.\n", *board_id);
3404 return -ENODEV;
3405 }
3406 return ARRAY_SIZE(products) - 1; /* generic unknown smart array */
3407}
3408
Stephen M. Cameron85bdbab2010-05-27 15:12:57 -05003409static inline bool hpsa_board_disabled(struct pci_dev *pdev)
3410{
3411 u16 command;
3412
3413 (void) pci_read_config_word(pdev, PCI_COMMAND, &command);
3414 return ((command & PCI_COMMAND_MEMORY) == 0);
3415}
3416
Stephen M. Cameron12d2cd42010-06-16 13:51:25 -05003417static int __devinit hpsa_pci_find_memory_BAR(struct pci_dev *pdev,
Stephen M. Cameron3a7774c2010-05-27 15:13:07 -05003418 unsigned long *memory_bar)
3419{
3420 int i;
3421
3422 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
Stephen M. Cameron12d2cd42010-06-16 13:51:25 -05003423 if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
Stephen M. Cameron3a7774c2010-05-27 15:13:07 -05003424 /* addressing mode bits already removed */
Stephen M. Cameron12d2cd42010-06-16 13:51:25 -05003425 *memory_bar = pci_resource_start(pdev, i);
3426 dev_dbg(&pdev->dev, "memory BAR = %lx\n",
Stephen M. Cameron3a7774c2010-05-27 15:13:07 -05003427 *memory_bar);
3428 return 0;
3429 }
Stephen M. Cameron12d2cd42010-06-16 13:51:25 -05003430 dev_warn(&pdev->dev, "no memory BAR found\n");
Stephen M. Cameron3a7774c2010-05-27 15:13:07 -05003431 return -ENODEV;
3432}
3433
Stephen M. Cameronfe5389c2011-01-06 14:48:03 -06003434static int __devinit hpsa_wait_for_board_state(struct pci_dev *pdev,
3435 void __iomem *vaddr, int wait_for_ready)
Stephen M. Cameron2c4c8c82010-05-27 15:13:12 -05003436{
Stephen M. Cameronfe5389c2011-01-06 14:48:03 -06003437 int i, iterations;
Stephen M. Cameron2c4c8c82010-05-27 15:13:12 -05003438 u32 scratchpad;
Stephen M. Cameronfe5389c2011-01-06 14:48:03 -06003439 if (wait_for_ready)
3440 iterations = HPSA_BOARD_READY_ITERATIONS;
3441 else
3442 iterations = HPSA_BOARD_NOT_READY_ITERATIONS;
Stephen M. Cameron2c4c8c82010-05-27 15:13:12 -05003443
Stephen M. Cameronfe5389c2011-01-06 14:48:03 -06003444 for (i = 0; i < iterations; i++) {
3445 scratchpad = readl(vaddr + SA5_SCRATCHPAD_OFFSET);
3446 if (wait_for_ready) {
3447 if (scratchpad == HPSA_FIRMWARE_READY)
3448 return 0;
3449 } else {
3450 if (scratchpad != HPSA_FIRMWARE_READY)
3451 return 0;
3452 }
Stephen M. Cameron2c4c8c82010-05-27 15:13:12 -05003453 msleep(HPSA_BOARD_READY_POLL_INTERVAL_MSECS);
3454 }
Stephen M. Cameronfe5389c2011-01-06 14:48:03 -06003455 dev_warn(&pdev->dev, "board not ready, timed out.\n");
Stephen M. Cameron2c4c8c82010-05-27 15:13:12 -05003456 return -ENODEV;
3457}
3458
Stephen M. Camerona51fd472010-06-16 13:51:30 -05003459static int __devinit hpsa_find_cfg_addrs(struct pci_dev *pdev,
3460 void __iomem *vaddr, u32 *cfg_base_addr, u64 *cfg_base_addr_index,
3461 u64 *cfg_offset)
3462{
3463 *cfg_base_addr = readl(vaddr + SA5_CTCFG_OFFSET);
3464 *cfg_offset = readl(vaddr + SA5_CTMEM_OFFSET);
3465 *cfg_base_addr &= (u32) 0x0000ffff;
3466 *cfg_base_addr_index = find_PCI_BAR_index(pdev, *cfg_base_addr);
3467 if (*cfg_base_addr_index == -1) {
3468 dev_warn(&pdev->dev, "cannot find cfg_base_addr_index\n");
3469 return -ENODEV;
3470 }
3471 return 0;
3472}
3473
Stephen M. Cameron77c44952010-05-27 15:13:17 -05003474static int __devinit hpsa_find_cfgtables(struct ctlr_info *h)
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003475{
Stephen M. Cameron01a02ff2010-02-04 08:41:33 -06003476 u64 cfg_offset;
3477 u32 cfg_base_addr;
3478 u64 cfg_base_addr_index;
Don Brace303932f2010-02-04 08:42:40 -06003479 u32 trans_offset;
Stephen M. Camerona51fd472010-06-16 13:51:30 -05003480 int rc;
Stephen M. Cameron77c44952010-05-27 15:13:17 -05003481
Stephen M. Camerona51fd472010-06-16 13:51:30 -05003482 rc = hpsa_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr,
3483 &cfg_base_addr_index, &cfg_offset);
3484 if (rc)
3485 return rc;
Stephen M. Cameron77c44952010-05-27 15:13:17 -05003486 h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev,
Stephen M. Camerona51fd472010-06-16 13:51:30 -05003487 cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable));
Stephen M. Cameron77c44952010-05-27 15:13:17 -05003488 if (!h->cfgtable)
3489 return -ENOMEM;
3490 /* Find performant mode table. */
Stephen M. Camerona51fd472010-06-16 13:51:30 -05003491 trans_offset = readl(&h->cfgtable->TransMethodOffset);
Stephen M. Cameron77c44952010-05-27 15:13:17 -05003492 h->transtable = remap_pci_mem(pci_resource_start(h->pdev,
3493 cfg_base_addr_index)+cfg_offset+trans_offset,
3494 sizeof(*h->transtable));
3495 if (!h->transtable)
3496 return -ENOMEM;
3497 return 0;
3498}
3499
Stephen M. Cameroncba3d382010-06-16 13:51:56 -05003500static void __devinit hpsa_get_max_perf_mode_cmds(struct ctlr_info *h)
3501{
3502 h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
Stephen M. Cameron72ceeae2011-01-06 14:48:13 -06003503
3504 /* Limit commands in memory limited kdump scenario. */
3505 if (reset_devices && h->max_commands > 32)
3506 h->max_commands = 32;
3507
Stephen M. Cameroncba3d382010-06-16 13:51:56 -05003508 if (h->max_commands < 16) {
3509 dev_warn(&h->pdev->dev, "Controller reports "
3510 "max supported commands of %d, an obvious lie. "
3511 "Using 16. Ensure that firmware is up to date.\n",
3512 h->max_commands);
3513 h->max_commands = 16;
3514 }
3515}
3516
Stephen M. Cameronb93d7532010-05-27 15:13:27 -05003517/* Interrogate the hardware for some limits:
3518 * max commands, max SG elements without chaining, and with chaining,
3519 * SG chain block size, etc.
3520 */
3521static void __devinit hpsa_find_board_params(struct ctlr_info *h)
3522{
Stephen M. Cameroncba3d382010-06-16 13:51:56 -05003523 hpsa_get_max_perf_mode_cmds(h);
Stephen M. Cameronb93d7532010-05-27 15:13:27 -05003524 h->nr_cmds = h->max_commands - 4; /* Allow room for some ioctls */
3525 h->maxsgentries = readl(&(h->cfgtable->MaxScatterGatherElements));
3526 /*
3527 * Limit in-command s/g elements to 32 save dma'able memory.
3528 * Howvever spec says if 0, use 31
3529 */
3530 h->max_cmd_sg_entries = 31;
3531 if (h->maxsgentries > 512) {
3532 h->max_cmd_sg_entries = 32;
3533 h->chainsize = h->maxsgentries - h->max_cmd_sg_entries + 1;
3534 h->maxsgentries--; /* save one for chain pointer */
3535 } else {
3536 h->maxsgentries = 31; /* default to traditional values */
3537 h->chainsize = 0;
3538 }
3539}
3540
Stephen M. Cameron76c46e42010-05-27 15:13:32 -05003541static inline bool hpsa_CISS_signature_present(struct ctlr_info *h)
3542{
3543 if ((readb(&h->cfgtable->Signature[0]) != 'C') ||
3544 (readb(&h->cfgtable->Signature[1]) != 'I') ||
3545 (readb(&h->cfgtable->Signature[2]) != 'S') ||
3546 (readb(&h->cfgtable->Signature[3]) != 'S')) {
3547 dev_warn(&h->pdev->dev, "not a valid CISS config table\n");
3548 return false;
3549 }
3550 return true;
3551}
3552
Stephen M. Cameronf7c39102010-05-27 15:13:38 -05003553/* Need to enable prefetch in the SCSI core for 6400 in x86 */
3554static inline void hpsa_enable_scsi_prefetch(struct ctlr_info *h)
3555{
3556#ifdef CONFIG_X86
3557 u32 prefetch;
3558
3559 prefetch = readl(&(h->cfgtable->SCSI_Prefetch));
3560 prefetch |= 0x100;
3561 writel(prefetch, &(h->cfgtable->SCSI_Prefetch));
3562#endif
3563}
3564
Stephen M. Cameron3d0eab62010-05-27 15:13:43 -05003565/* Disable DMA prefetch for the P600. Otherwise an ASIC bug may result
3566 * in a prefetch beyond physical memory.
3567 */
3568static inline void hpsa_p600_dma_prefetch_quirk(struct ctlr_info *h)
3569{
3570 u32 dma_prefetch;
3571
3572 if (h->board_id != 0x3225103C)
3573 return;
3574 dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG);
3575 dma_prefetch |= 0x8000;
3576 writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG);
3577}
3578
Stephen M. Cameron3f4336f2010-05-27 15:14:08 -05003579static void __devinit hpsa_wait_for_mode_change_ack(struct ctlr_info *h)
Stephen M. Cameroneb6b2ae2010-05-27 15:13:48 -05003580{
3581 int i;
Stephen M. Cameron6eaf46f2011-01-06 14:48:24 -06003582 u32 doorbell_value;
3583 unsigned long flags;
Stephen M. Cameroneb6b2ae2010-05-27 15:13:48 -05003584
3585 /* under certain very rare conditions, this can take awhile.
3586 * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
3587 * as we enter this code.)
3588 */
3589 for (i = 0; i < MAX_CONFIG_WAIT; i++) {
Stephen M. Cameron6eaf46f2011-01-06 14:48:24 -06003590 spin_lock_irqsave(&h->lock, flags);
3591 doorbell_value = readl(h->vaddr + SA5_DOORBELL);
3592 spin_unlock_irqrestore(&h->lock, flags);
3593 if (!doorbell_value & CFGTBL_ChangeReq)
Stephen M. Cameroneb6b2ae2010-05-27 15:13:48 -05003594 break;
3595 /* delay and try again */
Stephen M. Cameron60d3f5b2011-01-06 14:48:34 -06003596 usleep_range(10000, 20000);
Stephen M. Cameroneb6b2ae2010-05-27 15:13:48 -05003597 }
Stephen M. Cameron3f4336f2010-05-27 15:14:08 -05003598}
3599
3600static int __devinit hpsa_enter_simple_mode(struct ctlr_info *h)
3601{
3602 u32 trans_support;
3603
3604 trans_support = readl(&(h->cfgtable->TransportSupport));
3605 if (!(trans_support & SIMPLE_MODE))
3606 return -ENOTSUPP;
3607
3608 h->max_commands = readl(&(h->cfgtable->CmdsOutMax));
3609 /* Update the field, and then ring the doorbell */
3610 writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest));
3611 writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
3612 hpsa_wait_for_mode_change_ack(h);
Stephen M. Cameroneb6b2ae2010-05-27 15:13:48 -05003613 print_cfg_table(&h->pdev->dev, h->cfgtable);
Stephen M. Cameroneb6b2ae2010-05-27 15:13:48 -05003614 if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) {
3615 dev_warn(&h->pdev->dev,
3616 "unable to get board into simple mode\n");
3617 return -ENODEV;
3618 }
3619 return 0;
3620}
3621
Stephen M. Cameron77c44952010-05-27 15:13:17 -05003622static int __devinit hpsa_pci_init(struct ctlr_info *h)
3623{
Stephen M. Cameroneb6b2ae2010-05-27 15:13:48 -05003624 int prod_index, err;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003625
Stephen M. Camerone5c880d2010-05-27 15:12:52 -05003626 prod_index = hpsa_lookup_board_id(h->pdev, &h->board_id);
3627 if (prod_index < 0)
3628 return -ENODEV;
3629 h->product_name = products[prod_index].product_name;
3630 h->access = *(products[prod_index].access);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003631
Stephen M. Cameron85bdbab2010-05-27 15:12:57 -05003632 if (hpsa_board_disabled(h->pdev)) {
Stephen M. Cameron55c06c72010-05-27 15:12:46 -05003633 dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003634 return -ENODEV;
3635 }
Stephen M. Cameron55c06c72010-05-27 15:12:46 -05003636 err = pci_enable_device(h->pdev);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003637 if (err) {
Stephen M. Cameron55c06c72010-05-27 15:12:46 -05003638 dev_warn(&h->pdev->dev, "unable to enable PCI device\n");
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003639 return err;
3640 }
3641
Stephen M. Cameron55c06c72010-05-27 15:12:46 -05003642 err = pci_request_regions(h->pdev, "hpsa");
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003643 if (err) {
Stephen M. Cameron55c06c72010-05-27 15:12:46 -05003644 dev_err(&h->pdev->dev,
3645 "cannot obtain PCI resources, aborting\n");
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003646 return err;
3647 }
Stephen M. Cameron6b3f4c52010-05-27 15:13:02 -05003648 hpsa_interrupt_mode(h);
Stephen M. Cameron12d2cd42010-06-16 13:51:25 -05003649 err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr);
Stephen M. Cameron3a7774c2010-05-27 15:13:07 -05003650 if (err)
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003651 goto err_out_free_res;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003652 h->vaddr = remap_pci_mem(h->paddr, 0x250);
Stephen M. Cameron204892e2010-05-27 15:13:22 -05003653 if (!h->vaddr) {
3654 err = -ENOMEM;
3655 goto err_out_free_res;
3656 }
Stephen M. Cameronfe5389c2011-01-06 14:48:03 -06003657 err = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
Stephen M. Cameron2c4c8c82010-05-27 15:13:12 -05003658 if (err)
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003659 goto err_out_free_res;
Stephen M. Cameron77c44952010-05-27 15:13:17 -05003660 err = hpsa_find_cfgtables(h);
3661 if (err)
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003662 goto err_out_free_res;
Stephen M. Cameronb93d7532010-05-27 15:13:27 -05003663 hpsa_find_board_params(h);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003664
Stephen M. Cameron76c46e42010-05-27 15:13:32 -05003665 if (!hpsa_CISS_signature_present(h)) {
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003666 err = -ENODEV;
3667 goto err_out_free_res;
3668 }
Stephen M. Cameronf7c39102010-05-27 15:13:38 -05003669 hpsa_enable_scsi_prefetch(h);
Stephen M. Cameron3d0eab62010-05-27 15:13:43 -05003670 hpsa_p600_dma_prefetch_quirk(h);
Stephen M. Cameroneb6b2ae2010-05-27 15:13:48 -05003671 err = hpsa_enter_simple_mode(h);
3672 if (err)
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003673 goto err_out_free_res;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003674 return 0;
3675
3676err_out_free_res:
Stephen M. Cameron204892e2010-05-27 15:13:22 -05003677 if (h->transtable)
3678 iounmap(h->transtable);
3679 if (h->cfgtable)
3680 iounmap(h->cfgtable);
3681 if (h->vaddr)
3682 iounmap(h->vaddr);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003683 /*
3684 * Deliberately omit pci_disable_device(): it does something nasty to
3685 * Smart Array controllers that pci_enable_device does not undo
3686 */
Stephen M. Cameron55c06c72010-05-27 15:12:46 -05003687 pci_release_regions(h->pdev);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003688 return err;
3689}
3690
Stephen M. Cameron339b2b12010-02-04 08:42:50 -06003691static void __devinit hpsa_hba_inquiry(struct ctlr_info *h)
3692{
3693 int rc;
3694
3695#define HBA_INQUIRY_BYTE_COUNT 64
3696 h->hba_inquiry_data = kmalloc(HBA_INQUIRY_BYTE_COUNT, GFP_KERNEL);
3697 if (!h->hba_inquiry_data)
3698 return;
3699 rc = hpsa_scsi_do_inquiry(h, RAID_CTLR_LUNID, 0,
3700 h->hba_inquiry_data, HBA_INQUIRY_BYTE_COUNT);
3701 if (rc != 0) {
3702 kfree(h->hba_inquiry_data);
3703 h->hba_inquiry_data = NULL;
3704 }
3705}
3706
Stephen M. Cameron4c2a8c42010-06-16 13:51:35 -05003707static __devinit int hpsa_init_reset_devices(struct pci_dev *pdev)
3708{
Stephen M. Cameron1df85522010-06-16 13:51:40 -05003709 int rc, i;
Stephen M. Cameron4c2a8c42010-06-16 13:51:35 -05003710
3711 if (!reset_devices)
3712 return 0;
3713
Stephen M. Cameron1df85522010-06-16 13:51:40 -05003714 /* Reset the controller with a PCI power-cycle or via doorbell */
3715 rc = hpsa_kdump_hard_reset_controller(pdev);
Stephen M. Cameron4c2a8c42010-06-16 13:51:35 -05003716
Stephen M. Cameron1df85522010-06-16 13:51:40 -05003717 /* -ENOTSUPP here means we cannot reset the controller
3718 * but it's already (and still) up and running in
Stephen M. Cameron18867652010-06-16 13:51:45 -05003719 * "performant mode". Or, it might be 640x, which can't reset
3720 * due to concerns about shared bbwc between 6402/6404 pair.
Stephen M. Cameron1df85522010-06-16 13:51:40 -05003721 */
3722 if (rc == -ENOTSUPP)
3723 return 0; /* just try to do the kdump anyhow. */
3724 if (rc)
3725 return -ENODEV;
Stephen M. Cameron4c2a8c42010-06-16 13:51:35 -05003726
3727 /* Now try to get the controller to respond to a no-op */
3728 for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) {
3729 if (hpsa_noop(pdev) == 0)
3730 break;
3731 else
3732 dev_warn(&pdev->dev, "no-op failed%s\n",
3733 (i < 11 ? "; re-trying" : ""));
3734 }
3735 return 0;
3736}
3737
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003738static int __devinit hpsa_init_one(struct pci_dev *pdev,
3739 const struct pci_device_id *ent)
3740{
Stephen M. Cameron4c2a8c42010-06-16 13:51:35 -05003741 int dac, rc;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003742 struct ctlr_info *h;
3743
3744 if (number_of_controllers == 0)
3745 printk(KERN_INFO DRIVER_NAME "\n");
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003746
Stephen M. Cameron4c2a8c42010-06-16 13:51:35 -05003747 rc = hpsa_init_reset_devices(pdev);
3748 if (rc)
3749 return rc;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003750
Don Brace303932f2010-02-04 08:42:40 -06003751 /* Command structures must be aligned on a 32-byte boundary because
3752 * the 5 lower bits of the address are used by the hardware. and by
3753 * the driver. See comments in hpsa.h for more info.
3754 */
3755#define COMMANDLIST_ALIGNMENT 32
3756 BUILD_BUG_ON(sizeof(struct CommandList) % COMMANDLIST_ALIGNMENT);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003757 h = kzalloc(sizeof(*h), GFP_KERNEL);
3758 if (!h)
Stephen M. Cameronecd9aad2010-02-04 08:41:59 -06003759 return -ENOMEM;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003760
Stephen M. Cameron55c06c72010-05-27 15:12:46 -05003761 h->pdev = pdev;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003762 h->busy_initializing = 1;
Stephen M. Cameron9e0fc762011-02-15 15:32:48 -06003763 INIT_LIST_HEAD(&h->cmpQ);
3764 INIT_LIST_HEAD(&h->reqQ);
Stephen M. Cameron6eaf46f2011-01-06 14:48:24 -06003765 spin_lock_init(&h->lock);
3766 spin_lock_init(&h->scan_lock);
Stephen M. Cameron55c06c72010-05-27 15:12:46 -05003767 rc = hpsa_pci_init(h);
Stephen M. Cameronecd9aad2010-02-04 08:41:59 -06003768 if (rc != 0)
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003769 goto clean1;
3770
3771 sprintf(h->devname, "hpsa%d", number_of_controllers);
3772 h->ctlr = number_of_controllers;
3773 number_of_controllers++;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003774
3775 /* configure PCI DMA stuff */
Stephen M. Cameronecd9aad2010-02-04 08:41:59 -06003776 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
3777 if (rc == 0) {
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003778 dac = 1;
Stephen M. Cameronecd9aad2010-02-04 08:41:59 -06003779 } else {
3780 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
3781 if (rc == 0) {
3782 dac = 0;
3783 } else {
3784 dev_err(&pdev->dev, "no suitable DMA available\n");
3785 goto clean1;
3786 }
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003787 }
3788
3789 /* make sure the board interrupts are off */
3790 h->access.set_intr_mask(h, HPSA_INTR_OFF);
Stephen M. Cameron10f66012010-06-16 13:51:50 -05003791
3792 if (h->msix_vector || h->msi_vector)
3793 rc = request_irq(h->intr[PERF_MODE_INT], do_hpsa_intr_msi,
3794 IRQF_DISABLED, h->devname, h);
3795 else
3796 rc = request_irq(h->intr[PERF_MODE_INT], do_hpsa_intr_intx,
3797 IRQF_DISABLED, h->devname, h);
Stephen M. Cameronecd9aad2010-02-04 08:41:59 -06003798 if (rc) {
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003799 dev_err(&pdev->dev, "unable to get irq %d for %s\n",
Don Brace303932f2010-02-04 08:42:40 -06003800 h->intr[PERF_MODE_INT], h->devname);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003801 goto clean2;
3802 }
3803
Don Brace303932f2010-02-04 08:42:40 -06003804 dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n",
3805 h->devname, pdev->device,
3806 h->intr[PERF_MODE_INT], dac ? "" : " not");
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003807
3808 h->cmd_pool_bits =
3809 kmalloc(((h->nr_cmds + BITS_PER_LONG -
3810 1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL);
3811 h->cmd_pool = pci_alloc_consistent(h->pdev,
3812 h->nr_cmds * sizeof(*h->cmd_pool),
3813 &(h->cmd_pool_dhandle));
3814 h->errinfo_pool = pci_alloc_consistent(h->pdev,
3815 h->nr_cmds * sizeof(*h->errinfo_pool),
3816 &(h->errinfo_pool_dhandle));
3817 if ((h->cmd_pool_bits == NULL)
3818 || (h->cmd_pool == NULL)
3819 || (h->errinfo_pool == NULL)) {
3820 dev_err(&pdev->dev, "out of memory");
Stephen M. Cameronecd9aad2010-02-04 08:41:59 -06003821 rc = -ENOMEM;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003822 goto clean4;
3823 }
Stephen M. Cameron33a2ffc2010-02-25 14:03:27 -06003824 if (hpsa_allocate_sg_chain_blocks(h))
3825 goto clean4;
Stephen M. Camerona08a8472010-02-04 08:43:16 -06003826 init_waitqueue_head(&h->scan_wait_queue);
3827 h->scan_finished = 1; /* no scan currently in progress */
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003828
3829 pci_set_drvdata(pdev, h);
3830 memset(h->cmd_pool_bits, 0,
3831 ((h->nr_cmds + BITS_PER_LONG -
3832 1) / BITS_PER_LONG) * sizeof(unsigned long));
3833
3834 hpsa_scsi_setup(h);
3835
3836 /* Turn the interrupts on so we can service requests */
3837 h->access.set_intr_mask(h, HPSA_INTR_ON);
3838
Don Brace303932f2010-02-04 08:42:40 -06003839 hpsa_put_ctlr_into_performant_mode(h);
Stephen M. Cameron339b2b12010-02-04 08:42:50 -06003840 hpsa_hba_inquiry(h);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003841 hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */
3842 h->busy_initializing = 0;
3843 return 1;
3844
3845clean4:
Stephen M. Cameron33a2ffc2010-02-25 14:03:27 -06003846 hpsa_free_sg_chain_blocks(h);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003847 kfree(h->cmd_pool_bits);
3848 if (h->cmd_pool)
3849 pci_free_consistent(h->pdev,
3850 h->nr_cmds * sizeof(struct CommandList),
3851 h->cmd_pool, h->cmd_pool_dhandle);
3852 if (h->errinfo_pool)
3853 pci_free_consistent(h->pdev,
3854 h->nr_cmds * sizeof(struct ErrorInfo),
3855 h->errinfo_pool,
3856 h->errinfo_pool_dhandle);
Don Brace303932f2010-02-04 08:42:40 -06003857 free_irq(h->intr[PERF_MODE_INT], h);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003858clean2:
3859clean1:
3860 h->busy_initializing = 0;
3861 kfree(h);
Stephen M. Cameronecd9aad2010-02-04 08:41:59 -06003862 return rc;
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003863}
3864
3865static void hpsa_flush_cache(struct ctlr_info *h)
3866{
3867 char *flush_buf;
3868 struct CommandList *c;
3869
3870 flush_buf = kzalloc(4, GFP_KERNEL);
3871 if (!flush_buf)
3872 return;
3873
3874 c = cmd_special_alloc(h);
3875 if (!c) {
3876 dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
3877 goto out_of_memory;
3878 }
3879 fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0,
3880 RAID_CTLR_LUNID, TYPE_CMD);
3881 hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_TODEVICE);
3882 if (c->err_info->CommandStatus != 0)
3883 dev_warn(&h->pdev->dev,
3884 "error flushing cache on controller\n");
3885 cmd_special_free(h, c);
3886out_of_memory:
3887 kfree(flush_buf);
3888}
3889
3890static void hpsa_shutdown(struct pci_dev *pdev)
3891{
3892 struct ctlr_info *h;
3893
3894 h = pci_get_drvdata(pdev);
3895 /* Turn board interrupts off and send the flush cache command
3896 * sendcmd will turn off interrupt, and send the flush...
3897 * To write all data in the battery backed cache to disks
3898 */
3899 hpsa_flush_cache(h);
3900 h->access.set_intr_mask(h, HPSA_INTR_OFF);
Don Brace303932f2010-02-04 08:42:40 -06003901 free_irq(h->intr[PERF_MODE_INT], h);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003902#ifdef CONFIG_PCI_MSI
3903 if (h->msix_vector)
3904 pci_disable_msix(h->pdev);
3905 else if (h->msi_vector)
3906 pci_disable_msi(h->pdev);
3907#endif /* CONFIG_PCI_MSI */
3908}
3909
3910static void __devexit hpsa_remove_one(struct pci_dev *pdev)
3911{
3912 struct ctlr_info *h;
3913
3914 if (pci_get_drvdata(pdev) == NULL) {
3915 dev_err(&pdev->dev, "unable to remove device \n");
3916 return;
3917 }
3918 h = pci_get_drvdata(pdev);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003919 hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */
3920 hpsa_shutdown(pdev);
3921 iounmap(h->vaddr);
Stephen M. Cameron204892e2010-05-27 15:13:22 -05003922 iounmap(h->transtable);
3923 iounmap(h->cfgtable);
Stephen M. Cameron33a2ffc2010-02-25 14:03:27 -06003924 hpsa_free_sg_chain_blocks(h);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003925 pci_free_consistent(h->pdev,
3926 h->nr_cmds * sizeof(struct CommandList),
3927 h->cmd_pool, h->cmd_pool_dhandle);
3928 pci_free_consistent(h->pdev,
3929 h->nr_cmds * sizeof(struct ErrorInfo),
3930 h->errinfo_pool, h->errinfo_pool_dhandle);
Don Brace303932f2010-02-04 08:42:40 -06003931 pci_free_consistent(h->pdev, h->reply_pool_size,
3932 h->reply_pool, h->reply_pool_dhandle);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003933 kfree(h->cmd_pool_bits);
Don Brace303932f2010-02-04 08:42:40 -06003934 kfree(h->blockFetchTable);
Stephen M. Cameron339b2b12010-02-04 08:42:50 -06003935 kfree(h->hba_inquiry_data);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003936 /*
3937 * Deliberately omit pci_disable_device(): it does something nasty to
3938 * Smart Array controllers that pci_enable_device does not undo
3939 */
3940 pci_release_regions(pdev);
3941 pci_set_drvdata(pdev, NULL);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08003942 kfree(h);
3943}
3944
3945static int hpsa_suspend(__attribute__((unused)) struct pci_dev *pdev,
3946 __attribute__((unused)) pm_message_t state)
3947{
3948 return -ENOSYS;
3949}
3950
3951static int hpsa_resume(__attribute__((unused)) struct pci_dev *pdev)
3952{
3953 return -ENOSYS;
3954}
3955
3956static struct pci_driver hpsa_pci_driver = {
3957 .name = "hpsa",
3958 .probe = hpsa_init_one,
3959 .remove = __devexit_p(hpsa_remove_one),
3960 .id_table = hpsa_pci_device_id, /* id_table */
3961 .shutdown = hpsa_shutdown,
3962 .suspend = hpsa_suspend,
3963 .resume = hpsa_resume,
3964};
3965
Don Brace303932f2010-02-04 08:42:40 -06003966/* Fill in bucket_map[], given nsgs (the max number of
3967 * scatter gather elements supported) and bucket[],
3968 * which is an array of 8 integers. The bucket[] array
3969 * contains 8 different DMA transfer sizes (in 16
3970 * byte increments) which the controller uses to fetch
3971 * commands. This function fills in bucket_map[], which
3972 * maps a given number of scatter gather elements to one of
3973 * the 8 DMA transfer sizes. The point of it is to allow the
3974 * controller to only do as much DMA as needed to fetch the
3975 * command, with the DMA transfer size encoded in the lower
3976 * bits of the command address.
3977 */
3978static void calc_bucket_map(int bucket[], int num_buckets,
3979 int nsgs, int *bucket_map)
3980{
3981 int i, j, b, size;
3982
3983 /* even a command with 0 SGs requires 4 blocks */
3984#define MINIMUM_TRANSFER_BLOCKS 4
3985#define NUM_BUCKETS 8
3986 /* Note, bucket_map must have nsgs+1 entries. */
3987 for (i = 0; i <= nsgs; i++) {
3988 /* Compute size of a command with i SG entries */
3989 size = i + MINIMUM_TRANSFER_BLOCKS;
3990 b = num_buckets; /* Assume the biggest bucket */
3991 /* Find the bucket that is just big enough */
3992 for (j = 0; j < 8; j++) {
3993 if (bucket[j] >= size) {
3994 b = j;
3995 break;
3996 }
3997 }
3998 /* for a command with i SG entries, use bucket b. */
3999 bucket_map[i] = b;
4000 }
4001}
4002
Stephen M. Cameron6c311b52010-05-27 15:14:19 -05004003static __devinit void hpsa_enter_performant_mode(struct ctlr_info *h)
Don Brace303932f2010-02-04 08:42:40 -06004004{
Stephen M. Cameron6c311b52010-05-27 15:14:19 -05004005 int i;
4006 unsigned long register_value;
Stephen M. Camerondef342b2010-05-27 15:14:39 -05004007
4008 /* This is a bit complicated. There are 8 registers on
4009 * the controller which we write to to tell it 8 different
4010 * sizes of commands which there may be. It's a way of
4011 * reducing the DMA done to fetch each command. Encoded into
4012 * each command's tag are 3 bits which communicate to the controller
4013 * which of the eight sizes that command fits within. The size of
4014 * each command depends on how many scatter gather entries there are.
4015 * Each SG entry requires 16 bytes. The eight registers are programmed
4016 * with the number of 16-byte blocks a command of that size requires.
4017 * The smallest command possible requires 5 such 16 byte blocks.
4018 * the largest command possible requires MAXSGENTRIES + 4 16-byte
4019 * blocks. Note, this only extends to the SG entries contained
4020 * within the command block, and does not extend to chained blocks
4021 * of SG elements. bft[] contains the eight values we write to
4022 * the registers. They are not evenly distributed, but have more
4023 * sizes for small commands, and fewer sizes for larger commands.
4024 */
4025 int bft[8] = {5, 6, 8, 10, 12, 20, 28, MAXSGENTRIES + 4};
4026 BUILD_BUG_ON(28 > MAXSGENTRIES + 4);
Don Brace303932f2010-02-04 08:42:40 -06004027 /* 5 = 1 s/g entry or 4k
4028 * 6 = 2 s/g entry or 8k
4029 * 8 = 4 s/g entry or 16k
4030 * 10 = 6 s/g entry or 24k
4031 */
Don Brace303932f2010-02-04 08:42:40 -06004032
4033 h->reply_pool_wraparound = 1; /* spec: init to 1 */
4034
4035 /* Controller spec: zero out this buffer. */
4036 memset(h->reply_pool, 0, h->reply_pool_size);
4037 h->reply_pool_head = h->reply_pool;
4038
Don Brace303932f2010-02-04 08:42:40 -06004039 bft[7] = h->max_sg_entries + 4;
4040 calc_bucket_map(bft, ARRAY_SIZE(bft), 32, h->blockFetchTable);
4041 for (i = 0; i < 8; i++)
4042 writel(bft[i], &h->transtable->BlockFetch[i]);
4043
4044 /* size of controller ring buffer */
4045 writel(h->max_commands, &h->transtable->RepQSize);
4046 writel(1, &h->transtable->RepQCount);
4047 writel(0, &h->transtable->RepQCtrAddrLow32);
4048 writel(0, &h->transtable->RepQCtrAddrHigh32);
4049 writel(h->reply_pool_dhandle, &h->transtable->RepQAddr0Low32);
4050 writel(0, &h->transtable->RepQAddr0High32);
4051 writel(CFGTBL_Trans_Performant,
4052 &(h->cfgtable->HostWrite.TransportRequest));
4053 writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
Stephen M. Cameron3f4336f2010-05-27 15:14:08 -05004054 hpsa_wait_for_mode_change_ack(h);
Don Brace303932f2010-02-04 08:42:40 -06004055 register_value = readl(&(h->cfgtable->TransportActive));
4056 if (!(register_value & CFGTBL_Trans_Performant)) {
4057 dev_warn(&h->pdev->dev, "unable to get board into"
4058 " performant mode\n");
4059 return;
4060 }
Stephen M. Cameron6c311b52010-05-27 15:14:19 -05004061}
4062
4063static __devinit void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
4064{
4065 u32 trans_support;
4066
Stephen M. Cameron02ec19c2011-01-06 14:48:29 -06004067 if (hpsa_simple_mode)
4068 return;
4069
Stephen M. Cameron6c311b52010-05-27 15:14:19 -05004070 trans_support = readl(&(h->cfgtable->TransportSupport));
4071 if (!(trans_support & PERFORMANT_MODE))
4072 return;
4073
Stephen M. Cameroncba3d382010-06-16 13:51:56 -05004074 hpsa_get_max_perf_mode_cmds(h);
Stephen M. Cameron6c311b52010-05-27 15:14:19 -05004075 h->max_sg_entries = 32;
4076 /* Performant mode ring buffer and supporting data structures */
4077 h->reply_pool_size = h->max_commands * sizeof(u64);
4078 h->reply_pool = pci_alloc_consistent(h->pdev, h->reply_pool_size,
4079 &(h->reply_pool_dhandle));
4080
4081 /* Need a block fetch table for performant mode */
4082 h->blockFetchTable = kmalloc(((h->max_sg_entries+1) *
4083 sizeof(u32)), GFP_KERNEL);
4084
4085 if ((h->reply_pool == NULL)
4086 || (h->blockFetchTable == NULL))
4087 goto clean_up;
4088
4089 hpsa_enter_performant_mode(h);
Don Brace303932f2010-02-04 08:42:40 -06004090
4091 /* Change the access methods to the performant access methods */
4092 h->access = SA5_performant_access;
4093 h->transMethod = CFGTBL_Trans_Performant;
4094
4095 return;
4096
4097clean_up:
4098 if (h->reply_pool)
4099 pci_free_consistent(h->pdev, h->reply_pool_size,
4100 h->reply_pool, h->reply_pool_dhandle);
4101 kfree(h->blockFetchTable);
4102}
4103
Stephen M. Cameronedd16362009-12-08 14:09:11 -08004104/*
4105 * This is it. Register the PCI driver information for the cards we control
4106 * the OS will call our registered routines when it finds one of our cards.
4107 */
4108static int __init hpsa_init(void)
4109{
Mike Miller31468402010-02-25 14:03:12 -06004110 return pci_register_driver(&hpsa_pci_driver);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08004111}
4112
4113static void __exit hpsa_cleanup(void)
4114{
4115 pci_unregister_driver(&hpsa_pci_driver);
Stephen M. Cameronedd16362009-12-08 14:09:11 -08004116}
4117
4118module_init(hpsa_init);
4119module_exit(hpsa_cleanup);