| Daniel Mack | 3cdbbee | 2009-03-31 15:23:53 -0700 | [diff] [blame] | 1 | Kernel driver isl29003 | 
|  | 2 | ===================== | 
|  | 3 |  | 
|  | 4 | Supported chips: | 
|  | 5 | * Intersil ISL29003 | 
|  | 6 | Prefix: 'isl29003' | 
|  | 7 | Addresses scanned: none | 
|  | 8 | Datasheet: | 
|  | 9 | http://www.intersil.com/data/fn/fn7464.pdf | 
|  | 10 |  | 
|  | 11 | Author: Daniel Mack <daniel@caiaq.de> | 
|  | 12 |  | 
|  | 13 |  | 
|  | 14 | Description | 
|  | 15 | ----------- | 
|  | 16 | The ISL29003 is an integrated light sensor with a 16-bit integrating type | 
|  | 17 | ADC, I2C user programmable lux range select for optimized counts/lux, and | 
|  | 18 | I2C multi-function control and monitoring capabilities. The internal ADC | 
|  | 19 | provides 16-bit resolution while rejecting 50Hz and 60Hz flicker caused by | 
|  | 20 | artificial light sources. | 
|  | 21 |  | 
|  | 22 | The driver allows to set the lux range, the bit resolution, the operational | 
|  | 23 | mode (see below) and the power state of device and can read the current lux | 
|  | 24 | value, of course. | 
|  | 25 |  | 
|  | 26 |  | 
|  | 27 | Detection | 
|  | 28 | --------- | 
|  | 29 |  | 
|  | 30 | The ISL29003 does not have an ID register which could be used to identify | 
|  | 31 | it, so the detection routine will just try to read from the configured I2C | 
|  | 32 | addess and consider the device to be present as soon as it ACKs the | 
|  | 33 | transfer. | 
|  | 34 |  | 
|  | 35 |  | 
|  | 36 | Sysfs entries | 
|  | 37 | ------------- | 
|  | 38 |  | 
|  | 39 | range: | 
|  | 40 | 0: 0 lux to 1000 lux (default) | 
|  | 41 | 1: 0 lux to 4000 lux | 
|  | 42 | 2: 0 lux to 16,000 lux | 
|  | 43 | 3: 0 lux to 64,000 lux | 
|  | 44 |  | 
|  | 45 | resolution: | 
|  | 46 | 0: 2^16 cycles (default) | 
|  | 47 | 1: 2^12 cycles | 
|  | 48 | 2: 2^8 cycles | 
|  | 49 | 3: 2^4 cycles | 
|  | 50 |  | 
|  | 51 | mode: | 
|  | 52 | 0: diode1's current (unsigned 16bit) (default) | 
|  | 53 | 1: diode1's current (unsigned 16bit) | 
|  | 54 | 2: difference between diodes (l1 - l2, signed 15bit) | 
|  | 55 |  | 
|  | 56 | power_state: | 
|  | 57 | 0: device is disabled (default) | 
|  | 58 | 1: device is enabled | 
|  | 59 |  | 
|  | 60 | lux (read only): | 
|  | 61 | returns the value from the last sensor reading | 
|  | 62 |  |