| Arnaud Patard (Rtp) | e39c75c | 2011-07-26 16:58:19 +0200 | [diff] [blame] | 1 | /* | 
 | 2 |  * Freescale iMX PATA driver | 
 | 3 |  * | 
 | 4 |  * Copyright (C) 2011 Arnaud Patard <arnaud.patard@rtp-net.org> | 
 | 5 |  * | 
 | 6 |  * Based on pata_platform - Copyright (C) 2006 - 2007  Paul Mundt | 
 | 7 |  * | 
 | 8 |  * This file is subject to the terms and conditions of the GNU General Public | 
 | 9 |  * License.  See the file "COPYING" in the main directory of this archive | 
 | 10 |  * for more details. | 
 | 11 |  * | 
 | 12 |  * TODO: | 
 | 13 |  * - dmaengine support | 
 | 14 |  * - check if timing stuff needed | 
 | 15 |  */ | 
 | 16 | #include <linux/kernel.h> | 
 | 17 | #include <linux/module.h> | 
 | 18 | #include <linux/init.h> | 
 | 19 | #include <linux/blkdev.h> | 
 | 20 | #include <scsi/scsi_host.h> | 
 | 21 | #include <linux/ata.h> | 
 | 22 | #include <linux/libata.h> | 
 | 23 | #include <linux/platform_device.h> | 
 | 24 | #include <linux/clk.h> | 
 | 25 |  | 
 | 26 | #define DRV_NAME "pata_imx" | 
 | 27 |  | 
 | 28 | #define PATA_IMX_ATA_CONTROL		0x24 | 
 | 29 | #define PATA_IMX_ATA_CTRL_FIFO_RST_B	(1<<7) | 
 | 30 | #define PATA_IMX_ATA_CTRL_ATA_RST_B	(1<<6) | 
 | 31 | #define PATA_IMX_ATA_CTRL_IORDY_EN	(1<<0) | 
 | 32 | #define PATA_IMX_ATA_INT_EN		0x2C | 
 | 33 | #define PATA_IMX_ATA_INTR_ATA_INTRQ2	(1<<3) | 
 | 34 | #define PATA_IMX_DRIVE_DATA		0xA0 | 
 | 35 | #define PATA_IMX_DRIVE_CONTROL		0xD8 | 
 | 36 |  | 
 | 37 | struct pata_imx_priv { | 
 | 38 | 	struct clk *clk; | 
 | 39 | 	/* timings/interrupt/control regs */ | 
 | 40 | 	u8 *host_regs; | 
 | 41 | 	u32 ata_ctl; | 
 | 42 | }; | 
 | 43 |  | 
 | 44 | static int pata_imx_set_mode(struct ata_link *link, struct ata_device **unused) | 
 | 45 | { | 
 | 46 | 	struct ata_device *dev; | 
 | 47 | 	struct ata_port *ap = link->ap; | 
 | 48 | 	struct pata_imx_priv *priv = ap->host->private_data; | 
 | 49 | 	u32 val; | 
 | 50 |  | 
 | 51 | 	ata_for_each_dev(dev, link, ENABLED) { | 
 | 52 | 		dev->pio_mode = dev->xfer_mode = XFER_PIO_0; | 
 | 53 | 		dev->xfer_shift = ATA_SHIFT_PIO; | 
 | 54 | 		dev->flags |= ATA_DFLAG_PIO; | 
 | 55 |  | 
 | 56 | 		val = __raw_readl(priv->host_regs + PATA_IMX_ATA_CONTROL); | 
 | 57 | 		if (ata_pio_need_iordy(dev)) | 
 | 58 | 			val |= PATA_IMX_ATA_CTRL_IORDY_EN; | 
 | 59 | 		else | 
 | 60 | 			val &= ~PATA_IMX_ATA_CTRL_IORDY_EN; | 
 | 61 | 		__raw_writel(val, priv->host_regs + PATA_IMX_ATA_CONTROL); | 
 | 62 |  | 
 | 63 | 		ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); | 
 | 64 | 	} | 
 | 65 | 	return 0; | 
 | 66 | } | 
 | 67 |  | 
 | 68 | static struct scsi_host_template pata_imx_sht = { | 
 | 69 | 	ATA_PIO_SHT(DRV_NAME), | 
 | 70 | }; | 
 | 71 |  | 
 | 72 | static struct ata_port_operations pata_imx_port_ops = { | 
 | 73 | 	.inherits		= &ata_sff_port_ops, | 
 | 74 | 	.sff_data_xfer		= ata_sff_data_xfer_noirq, | 
 | 75 | 	.cable_detect		= ata_cable_unknown, | 
 | 76 | 	.set_mode		= pata_imx_set_mode, | 
 | 77 | }; | 
 | 78 |  | 
 | 79 | static void pata_imx_setup_port(struct ata_ioports *ioaddr) | 
 | 80 | { | 
 | 81 | 	/* Fixup the port shift for platforms that need it */ | 
 | 82 | 	ioaddr->data_addr	= ioaddr->cmd_addr + (ATA_REG_DATA    << 2); | 
 | 83 | 	ioaddr->error_addr	= ioaddr->cmd_addr + (ATA_REG_ERR     << 2); | 
 | 84 | 	ioaddr->feature_addr	= ioaddr->cmd_addr + (ATA_REG_FEATURE << 2); | 
 | 85 | 	ioaddr->nsect_addr	= ioaddr->cmd_addr + (ATA_REG_NSECT   << 2); | 
 | 86 | 	ioaddr->lbal_addr	= ioaddr->cmd_addr + (ATA_REG_LBAL    << 2); | 
 | 87 | 	ioaddr->lbam_addr	= ioaddr->cmd_addr + (ATA_REG_LBAM    << 2); | 
 | 88 | 	ioaddr->lbah_addr	= ioaddr->cmd_addr + (ATA_REG_LBAH    << 2); | 
 | 89 | 	ioaddr->device_addr	= ioaddr->cmd_addr + (ATA_REG_DEVICE  << 2); | 
 | 90 | 	ioaddr->status_addr	= ioaddr->cmd_addr + (ATA_REG_STATUS  << 2); | 
 | 91 | 	ioaddr->command_addr	= ioaddr->cmd_addr + (ATA_REG_CMD     << 2); | 
 | 92 | } | 
 | 93 |  | 
 | 94 | static int __devinit pata_imx_probe(struct platform_device *pdev) | 
 | 95 | { | 
 | 96 | 	struct ata_host *host; | 
 | 97 | 	struct ata_port *ap; | 
 | 98 | 	struct pata_imx_priv *priv; | 
 | 99 | 	int irq = 0; | 
 | 100 | 	struct resource *io_res; | 
 | 101 |  | 
 | 102 | 	io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 103 | 	if (io_res == NULL) | 
 | 104 | 		return -EINVAL; | 
 | 105 |  | 
 | 106 | 	irq = platform_get_irq(pdev, 0); | 
 | 107 | 	if (irq <= 0) | 
 | 108 | 		return -EINVAL; | 
 | 109 |  | 
 | 110 | 	priv = devm_kzalloc(&pdev->dev, | 
 | 111 | 				sizeof(struct pata_imx_priv), GFP_KERNEL); | 
 | 112 | 	if (!priv) | 
 | 113 | 		return -ENOMEM; | 
 | 114 |  | 
 | 115 | 	priv->clk = clk_get(&pdev->dev, NULL); | 
 | 116 | 	if (IS_ERR(priv->clk)) { | 
 | 117 | 		dev_err(&pdev->dev, "Failed to get clock\n"); | 
 | 118 | 		return PTR_ERR(priv->clk); | 
 | 119 | 	} | 
 | 120 |  | 
 | 121 | 	clk_enable(priv->clk); | 
 | 122 |  | 
 | 123 | 	host = ata_host_alloc(&pdev->dev, 1); | 
 | 124 | 	if (!host) | 
 | 125 | 		goto free_priv; | 
 | 126 |  | 
 | 127 | 	host->private_data = priv; | 
 | 128 | 	ap = host->ports[0]; | 
 | 129 |  | 
 | 130 | 	ap->ops = &pata_imx_port_ops; | 
 | 131 | 	ap->pio_mask = ATA_PIO0; | 
 | 132 | 	ap->flags |= ATA_FLAG_SLAVE_POSS; | 
 | 133 |  | 
 | 134 | 	priv->host_regs = devm_ioremap(&pdev->dev, io_res->start, | 
 | 135 | 		resource_size(io_res)); | 
 | 136 | 	if (!priv->host_regs) { | 
 | 137 | 		dev_err(&pdev->dev, "failed to map IO/CTL base\n"); | 
 | 138 | 		goto free_priv; | 
 | 139 | 	} | 
 | 140 |  | 
 | 141 | 	ap->ioaddr.cmd_addr = priv->host_regs + PATA_IMX_DRIVE_DATA; | 
 | 142 | 	ap->ioaddr.ctl_addr = priv->host_regs + PATA_IMX_DRIVE_CONTROL; | 
 | 143 |  | 
 | 144 | 	ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr; | 
 | 145 |  | 
 | 146 | 	pata_imx_setup_port(&ap->ioaddr); | 
 | 147 |  | 
 | 148 | 	ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", | 
 | 149 | 		(unsigned long long)io_res->start + PATA_IMX_DRIVE_DATA, | 
 | 150 | 		(unsigned long long)io_res->start + PATA_IMX_DRIVE_CONTROL); | 
 | 151 |  | 
 | 152 | 	/* deassert resets */ | 
 | 153 | 	__raw_writel(PATA_IMX_ATA_CTRL_FIFO_RST_B | | 
 | 154 | 			PATA_IMX_ATA_CTRL_ATA_RST_B, | 
 | 155 | 			priv->host_regs + PATA_IMX_ATA_CONTROL); | 
 | 156 | 	/* enable interrupts */ | 
 | 157 | 	__raw_writel(PATA_IMX_ATA_INTR_ATA_INTRQ2, | 
 | 158 | 			priv->host_regs + PATA_IMX_ATA_INT_EN); | 
 | 159 |  | 
 | 160 | 	/* activate */ | 
 | 161 | 	return ata_host_activate(host, irq, ata_sff_interrupt, 0, | 
 | 162 | 				&pata_imx_sht); | 
 | 163 |  | 
 | 164 | free_priv: | 
 | 165 | 	clk_disable(priv->clk); | 
 | 166 | 	clk_put(priv->clk); | 
 | 167 | 	return -ENOMEM; | 
 | 168 | } | 
 | 169 |  | 
 | 170 | static int __devexit pata_imx_remove(struct platform_device *pdev) | 
 | 171 | { | 
 | 172 | 	struct ata_host *host = dev_get_drvdata(&pdev->dev); | 
 | 173 | 	struct pata_imx_priv *priv = host->private_data; | 
 | 174 |  | 
 | 175 | 	ata_host_detach(host); | 
 | 176 |  | 
 | 177 | 	__raw_writel(0, priv->host_regs + PATA_IMX_ATA_INT_EN); | 
 | 178 |  | 
 | 179 | 	clk_disable(priv->clk); | 
 | 180 | 	clk_put(priv->clk); | 
 | 181 |  | 
 | 182 | 	return 0; | 
 | 183 | } | 
 | 184 |  | 
 | 185 | #ifdef CONFIG_PM | 
 | 186 | static int pata_imx_suspend(struct device *dev) | 
 | 187 | { | 
 | 188 | 	struct ata_host *host = dev_get_drvdata(dev); | 
 | 189 | 	struct pata_imx_priv *priv = host->private_data; | 
 | 190 | 	int ret; | 
 | 191 |  | 
 | 192 | 	ret = ata_host_suspend(host, PMSG_SUSPEND); | 
 | 193 | 	if (!ret) { | 
 | 194 | 		__raw_writel(0, priv->host_regs + PATA_IMX_ATA_INT_EN); | 
 | 195 | 		priv->ata_ctl = | 
 | 196 | 			__raw_readl(priv->host_regs + PATA_IMX_ATA_CONTROL); | 
 | 197 | 		clk_disable(priv->clk); | 
 | 198 | 	} | 
 | 199 |  | 
 | 200 | 	return ret; | 
 | 201 | } | 
 | 202 |  | 
 | 203 | static int pata_imx_resume(struct device *dev) | 
 | 204 | { | 
 | 205 | 	struct ata_host *host = dev_get_drvdata(dev); | 
 | 206 | 	struct pata_imx_priv *priv = host->private_data; | 
 | 207 |  | 
 | 208 | 	clk_enable(priv->clk); | 
 | 209 |  | 
 | 210 | 	__raw_writel(priv->ata_ctl, priv->host_regs + PATA_IMX_ATA_CONTROL); | 
 | 211 |  | 
 | 212 | 	__raw_writel(PATA_IMX_ATA_INTR_ATA_INTRQ2, | 
 | 213 | 			priv->host_regs + PATA_IMX_ATA_INT_EN); | 
 | 214 |  | 
 | 215 | 	ata_host_resume(host); | 
 | 216 |  | 
 | 217 | 	return 0; | 
 | 218 | } | 
 | 219 |  | 
 | 220 | static const struct dev_pm_ops pata_imx_pm_ops = { | 
 | 221 | 	.suspend	= pata_imx_suspend, | 
 | 222 | 	.resume		= pata_imx_resume, | 
 | 223 | }; | 
 | 224 | #endif | 
 | 225 |  | 
 | 226 | static struct platform_driver pata_imx_driver = { | 
 | 227 | 	.probe		= pata_imx_probe, | 
 | 228 | 	.remove		= __devexit_p(pata_imx_remove), | 
 | 229 | 	.driver = { | 
 | 230 | 		.name		= DRV_NAME, | 
 | 231 | 		.owner		= THIS_MODULE, | 
 | 232 | #ifdef CONFIG_PM | 
 | 233 | 		.pm		= &pata_imx_pm_ops, | 
 | 234 | #endif | 
 | 235 | 	}, | 
 | 236 | }; | 
 | 237 |  | 
 | 238 | static int __init pata_imx_init(void) | 
 | 239 | { | 
 | 240 | 	return platform_driver_register(&pata_imx_driver); | 
 | 241 | } | 
 | 242 |  | 
 | 243 | static void __exit pata_imx_exit(void) | 
 | 244 | { | 
 | 245 | 	platform_driver_unregister(&pata_imx_driver); | 
 | 246 | } | 
 | 247 | module_init(pata_imx_init); | 
 | 248 | module_exit(pata_imx_exit); | 
 | 249 |  | 
 | 250 | MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>"); | 
 | 251 | MODULE_DESCRIPTION("low-level driver for iMX PATA"); | 
 | 252 | MODULE_LICENSE("GPL"); | 
 | 253 | MODULE_ALIAS("platform:" DRV_NAME); |