| Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 1 | /* | 
| Heungjun Kim | adf779c | 2011-02-23 21:40:11 -0800 | [diff] [blame] | 2 | * Touchkey driver for MELFAS MCS5000/5080 controller | 
| Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 3 | * | 
|  | 4 | * Copyright (C) 2010 Samsung Electronics Co.Ltd | 
|  | 5 | * Author: HeungJun Kim <riverful.kim@samsung.com> | 
|  | 6 | * Author: Joonyoung Shim <jy0922.shim@samsung.com> | 
|  | 7 | * | 
|  | 8 | * This program is free software; you can redistribute  it and/or modify it | 
|  | 9 | * under  the terms of  the GNU General  Public License as published by the | 
|  | 10 | * Free Software Foundation;  either version 2 of the  License, or (at your | 
|  | 11 | * option) any later version. | 
|  | 12 | */ | 
|  | 13 |  | 
|  | 14 | #include <linux/module.h> | 
|  | 15 | #include <linux/init.h> | 
|  | 16 | #include <linux/i2c.h> | 
|  | 17 | #include <linux/i2c/mcs.h> | 
|  | 18 | #include <linux/interrupt.h> | 
|  | 19 | #include <linux/input.h> | 
|  | 20 | #include <linux/irq.h> | 
|  | 21 | #include <linux/slab.h> | 
| Heungjun Kim | adf779c | 2011-02-23 21:40:11 -0800 | [diff] [blame] | 22 | #include <linux/pm.h> | 
| Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 23 |  | 
|  | 24 | /* MCS5000 Touchkey */ | 
|  | 25 | #define MCS5000_TOUCHKEY_STATUS		0x04 | 
|  | 26 | #define MCS5000_TOUCHKEY_STATUS_PRESS	7 | 
|  | 27 | #define MCS5000_TOUCHKEY_FW		0x0a | 
|  | 28 | #define MCS5000_TOUCHKEY_BASE_VAL	0x61 | 
|  | 29 |  | 
|  | 30 | /* MCS5080 Touchkey */ | 
|  | 31 | #define MCS5080_TOUCHKEY_STATUS		0x00 | 
|  | 32 | #define MCS5080_TOUCHKEY_STATUS_PRESS	3 | 
|  | 33 | #define MCS5080_TOUCHKEY_FW		0x01 | 
|  | 34 | #define MCS5080_TOUCHKEY_BASE_VAL	0x1 | 
|  | 35 |  | 
|  | 36 | enum mcs_touchkey_type { | 
|  | 37 | MCS5000_TOUCHKEY, | 
|  | 38 | MCS5080_TOUCHKEY, | 
|  | 39 | }; | 
|  | 40 |  | 
|  | 41 | struct mcs_touchkey_chip { | 
|  | 42 | unsigned int status_reg; | 
|  | 43 | unsigned int pressbit; | 
|  | 44 | unsigned int press_invert; | 
|  | 45 | unsigned int baseval; | 
|  | 46 | }; | 
|  | 47 |  | 
|  | 48 | struct mcs_touchkey_data { | 
| Heungjun Kim | adf779c | 2011-02-23 21:40:11 -0800 | [diff] [blame] | 49 | void (*poweron)(bool); | 
|  | 50 |  | 
| Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 51 | struct i2c_client *client; | 
|  | 52 | struct input_dev *input_dev; | 
|  | 53 | struct mcs_touchkey_chip chip; | 
|  | 54 | unsigned int key_code; | 
|  | 55 | unsigned int key_val; | 
|  | 56 | unsigned short keycodes[]; | 
|  | 57 | }; | 
|  | 58 |  | 
|  | 59 | static irqreturn_t mcs_touchkey_interrupt(int irq, void *dev_id) | 
|  | 60 | { | 
|  | 61 | struct mcs_touchkey_data *data = dev_id; | 
|  | 62 | struct mcs_touchkey_chip *chip = &data->chip; | 
|  | 63 | struct i2c_client *client = data->client; | 
|  | 64 | struct input_dev *input = data->input_dev; | 
|  | 65 | unsigned int key_val; | 
|  | 66 | unsigned int pressed; | 
|  | 67 | int val; | 
|  | 68 |  | 
|  | 69 | val = i2c_smbus_read_byte_data(client, chip->status_reg); | 
|  | 70 | if (val < 0) { | 
|  | 71 | dev_err(&client->dev, "i2c read error [%d]\n", val); | 
|  | 72 | goto out; | 
|  | 73 | } | 
|  | 74 |  | 
|  | 75 | pressed = (val & (1 << chip->pressbit)) >> chip->pressbit; | 
|  | 76 | if (chip->press_invert) | 
|  | 77 | pressed ^= chip->press_invert; | 
|  | 78 |  | 
|  | 79 | /* key_val is 0 when released, so we should use key_val of press. */ | 
|  | 80 | if (pressed) { | 
|  | 81 | key_val = val & (0xff >> (8 - chip->pressbit)); | 
|  | 82 | if (!key_val) | 
|  | 83 | goto out; | 
|  | 84 | key_val -= chip->baseval; | 
|  | 85 | data->key_code = data->keycodes[key_val]; | 
|  | 86 | data->key_val = key_val; | 
|  | 87 | } | 
|  | 88 |  | 
|  | 89 | input_event(input, EV_MSC, MSC_SCAN, data->key_val); | 
|  | 90 | input_report_key(input, data->key_code, pressed); | 
|  | 91 | input_sync(input); | 
|  | 92 |  | 
|  | 93 | dev_dbg(&client->dev, "key %d %d %s\n", data->key_val, data->key_code, | 
|  | 94 | pressed ? "pressed" : "released"); | 
|  | 95 |  | 
|  | 96 | out: | 
|  | 97 | return IRQ_HANDLED; | 
|  | 98 | } | 
|  | 99 |  | 
|  | 100 | static int __devinit mcs_touchkey_probe(struct i2c_client *client, | 
|  | 101 | const struct i2c_device_id *id) | 
|  | 102 | { | 
|  | 103 | const struct mcs_platform_data *pdata; | 
|  | 104 | struct mcs_touchkey_data *data; | 
|  | 105 | struct input_dev *input_dev; | 
|  | 106 | unsigned int fw_reg; | 
|  | 107 | int fw_ver; | 
|  | 108 | int error; | 
|  | 109 | int i; | 
|  | 110 |  | 
|  | 111 | pdata = client->dev.platform_data; | 
|  | 112 | if (!pdata) { | 
|  | 113 | dev_err(&client->dev, "no platform data defined\n"); | 
|  | 114 | return -EINVAL; | 
|  | 115 | } | 
|  | 116 |  | 
|  | 117 | data = kzalloc(sizeof(struct mcs_touchkey_data) + | 
|  | 118 | sizeof(data->keycodes[0]) * (pdata->key_maxval + 1), | 
|  | 119 | GFP_KERNEL); | 
|  | 120 | input_dev = input_allocate_device(); | 
|  | 121 | if (!data || !input_dev) { | 
|  | 122 | dev_err(&client->dev, "Failed to allocate memory\n"); | 
|  | 123 | error = -ENOMEM; | 
|  | 124 | goto err_free_mem; | 
|  | 125 | } | 
|  | 126 |  | 
|  | 127 | data->client = client; | 
|  | 128 | data->input_dev = input_dev; | 
|  | 129 |  | 
|  | 130 | if (id->driver_data == MCS5000_TOUCHKEY) { | 
|  | 131 | data->chip.status_reg = MCS5000_TOUCHKEY_STATUS; | 
|  | 132 | data->chip.pressbit = MCS5000_TOUCHKEY_STATUS_PRESS; | 
|  | 133 | data->chip.baseval = MCS5000_TOUCHKEY_BASE_VAL; | 
|  | 134 | fw_reg = MCS5000_TOUCHKEY_FW; | 
|  | 135 | } else { | 
|  | 136 | data->chip.status_reg = MCS5080_TOUCHKEY_STATUS; | 
|  | 137 | data->chip.pressbit = MCS5080_TOUCHKEY_STATUS_PRESS; | 
|  | 138 | data->chip.press_invert = 1; | 
|  | 139 | data->chip.baseval = MCS5080_TOUCHKEY_BASE_VAL; | 
|  | 140 | fw_reg = MCS5080_TOUCHKEY_FW; | 
|  | 141 | } | 
|  | 142 |  | 
|  | 143 | fw_ver = i2c_smbus_read_byte_data(client, fw_reg); | 
|  | 144 | if (fw_ver < 0) { | 
|  | 145 | error = fw_ver; | 
|  | 146 | dev_err(&client->dev, "i2c read error[%d]\n", error); | 
|  | 147 | goto err_free_mem; | 
|  | 148 | } | 
|  | 149 | dev_info(&client->dev, "Firmware version: %d\n", fw_ver); | 
|  | 150 |  | 
|  | 151 | input_dev->name = "MELPAS MCS Touchkey"; | 
|  | 152 | input_dev->id.bustype = BUS_I2C; | 
|  | 153 | input_dev->dev.parent = &client->dev; | 
|  | 154 | input_dev->evbit[0] = BIT_MASK(EV_KEY); | 
|  | 155 | if (!pdata->no_autorepeat) | 
|  | 156 | input_dev->evbit[0] |= BIT_MASK(EV_REP); | 
|  | 157 | input_dev->keycode = data->keycodes; | 
|  | 158 | input_dev->keycodesize = sizeof(data->keycodes[0]); | 
|  | 159 | input_dev->keycodemax = pdata->key_maxval + 1; | 
|  | 160 |  | 
|  | 161 | for (i = 0; i < pdata->keymap_size; i++) { | 
|  | 162 | unsigned int val = MCS_KEY_VAL(pdata->keymap[i]); | 
|  | 163 | unsigned int code = MCS_KEY_CODE(pdata->keymap[i]); | 
|  | 164 |  | 
|  | 165 | data->keycodes[val] = code; | 
|  | 166 | __set_bit(code, input_dev->keybit); | 
|  | 167 | } | 
|  | 168 |  | 
|  | 169 | input_set_capability(input_dev, EV_MSC, MSC_SCAN); | 
|  | 170 | input_set_drvdata(input_dev, data); | 
|  | 171 |  | 
|  | 172 | if (pdata->cfg_pin) | 
|  | 173 | pdata->cfg_pin(); | 
|  | 174 |  | 
| Heungjun Kim | adf779c | 2011-02-23 21:40:11 -0800 | [diff] [blame] | 175 | if (pdata->poweron) { | 
|  | 176 | data->poweron = pdata->poweron; | 
|  | 177 | data->poweron(true); | 
|  | 178 | } | 
|  | 179 |  | 
| Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 180 | error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt, | 
|  | 181 | IRQF_TRIGGER_FALLING, client->dev.driver->name, data); | 
|  | 182 | if (error) { | 
|  | 183 | dev_err(&client->dev, "Failed to register interrupt\n"); | 
|  | 184 | goto err_free_mem; | 
|  | 185 | } | 
|  | 186 |  | 
|  | 187 | error = input_register_device(input_dev); | 
|  | 188 | if (error) | 
|  | 189 | goto err_free_irq; | 
|  | 190 |  | 
|  | 191 | i2c_set_clientdata(client, data); | 
|  | 192 | return 0; | 
|  | 193 |  | 
|  | 194 | err_free_irq: | 
|  | 195 | free_irq(client->irq, data); | 
|  | 196 | err_free_mem: | 
|  | 197 | input_free_device(input_dev); | 
|  | 198 | kfree(data); | 
|  | 199 | return error; | 
|  | 200 | } | 
|  | 201 |  | 
|  | 202 | static int __devexit mcs_touchkey_remove(struct i2c_client *client) | 
|  | 203 | { | 
|  | 204 | struct mcs_touchkey_data *data = i2c_get_clientdata(client); | 
|  | 205 |  | 
|  | 206 | free_irq(client->irq, data); | 
| Heungjun Kim | adf779c | 2011-02-23 21:40:11 -0800 | [diff] [blame] | 207 | if (data->poweron) | 
|  | 208 | data->poweron(false); | 
| Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 209 | input_unregister_device(data->input_dev); | 
|  | 210 | kfree(data); | 
|  | 211 |  | 
|  | 212 | return 0; | 
|  | 213 | } | 
|  | 214 |  | 
| HeungJun Kim | 5f62615 | 2011-02-23 21:42:49 -0800 | [diff] [blame] | 215 | static void mcs_touchkey_shutdown(struct i2c_client *client) | 
|  | 216 | { | 
|  | 217 | struct mcs_touchkey_data *data = i2c_get_clientdata(client); | 
|  | 218 |  | 
|  | 219 | if (data->poweron) | 
|  | 220 | data->poweron(false); | 
|  | 221 | } | 
|  | 222 |  | 
| Heungjun Kim | adf779c | 2011-02-23 21:40:11 -0800 | [diff] [blame] | 223 | #ifdef CONFIG_PM_SLEEP | 
|  | 224 | static int mcs_touchkey_suspend(struct device *dev) | 
|  | 225 | { | 
|  | 226 | struct mcs_touchkey_data *data = dev_get_drvdata(dev); | 
|  | 227 | struct i2c_client *client = data->client; | 
|  | 228 |  | 
|  | 229 | /* Disable the work */ | 
|  | 230 | disable_irq(client->irq); | 
|  | 231 |  | 
|  | 232 | /* Finally turn off the power */ | 
|  | 233 | if (data->poweron) | 
|  | 234 | data->poweron(false); | 
|  | 235 |  | 
|  | 236 | return 0; | 
|  | 237 | } | 
|  | 238 |  | 
|  | 239 | static int mcs_touchkey_resume(struct device *dev) | 
|  | 240 | { | 
|  | 241 | struct mcs_touchkey_data *data = dev_get_drvdata(dev); | 
|  | 242 | struct i2c_client *client = data->client; | 
|  | 243 |  | 
|  | 244 | /* Enable the device first */ | 
|  | 245 | if (data->poweron) | 
|  | 246 | data->poweron(true); | 
|  | 247 |  | 
|  | 248 | /* Enable irq again */ | 
|  | 249 | enable_irq(client->irq); | 
|  | 250 |  | 
|  | 251 | return 0; | 
|  | 252 | } | 
|  | 253 | #endif | 
|  | 254 |  | 
|  | 255 | static SIMPLE_DEV_PM_OPS(mcs_touchkey_pm_ops, | 
|  | 256 | mcs_touchkey_suspend, mcs_touchkey_resume); | 
|  | 257 |  | 
| Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 258 | static const struct i2c_device_id mcs_touchkey_id[] = { | 
|  | 259 | { "mcs5000_touchkey", MCS5000_TOUCHKEY }, | 
|  | 260 | { "mcs5080_touchkey", MCS5080_TOUCHKEY }, | 
|  | 261 | { } | 
|  | 262 | }; | 
|  | 263 | MODULE_DEVICE_TABLE(i2c, mcs_touchkey_id); | 
|  | 264 |  | 
|  | 265 | static struct i2c_driver mcs_touchkey_driver = { | 
|  | 266 | .driver = { | 
|  | 267 | .name	= "mcs_touchkey", | 
|  | 268 | .owner	= THIS_MODULE, | 
| Heungjun Kim | adf779c | 2011-02-23 21:40:11 -0800 | [diff] [blame] | 269 | .pm	= &mcs_touchkey_pm_ops, | 
| Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 270 | }, | 
|  | 271 | .probe		= mcs_touchkey_probe, | 
|  | 272 | .remove		= __devexit_p(mcs_touchkey_remove), | 
| HeungJun Kim | 5f62615 | 2011-02-23 21:42:49 -0800 | [diff] [blame] | 273 | .shutdown       = mcs_touchkey_shutdown, | 
| Joonyoung Shim | 312e8e8 | 2010-07-04 01:21:25 -0700 | [diff] [blame] | 274 | .id_table	= mcs_touchkey_id, | 
|  | 275 | }; | 
|  | 276 |  | 
|  | 277 | static int __init mcs_touchkey_init(void) | 
|  | 278 | { | 
|  | 279 | return i2c_add_driver(&mcs_touchkey_driver); | 
|  | 280 | } | 
|  | 281 |  | 
|  | 282 | static void __exit mcs_touchkey_exit(void) | 
|  | 283 | { | 
|  | 284 | i2c_del_driver(&mcs_touchkey_driver); | 
|  | 285 | } | 
|  | 286 |  | 
|  | 287 | module_init(mcs_touchkey_init); | 
|  | 288 | module_exit(mcs_touchkey_exit); | 
|  | 289 |  | 
|  | 290 | /* Module information */ | 
|  | 291 | MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); | 
|  | 292 | MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>"); | 
|  | 293 | MODULE_DESCRIPTION("Touchkey driver for MELFAS MCS5000/5080 controller"); | 
|  | 294 | MODULE_LICENSE("GPL"); |