| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 1 | /** | 
|  | 2 | * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI | 
|  | 3 | * | 
|  | 4 | * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com | 
|  | 5 | * Author: Keshava Munegowda <keshava_mgowda@ti.com> | 
|  | 6 | * | 
|  | 7 | * This program is free software: you can redistribute it and/or modify | 
|  | 8 | * it under the terms of the GNU General Public License version 2  of | 
|  | 9 | * the License as published by the Free Software Foundation. | 
|  | 10 | * | 
|  | 11 | * This program is distributed in the hope that it will be useful, | 
|  | 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | 14 | * GNU General Public License for more details. | 
|  | 15 | * | 
|  | 16 | * You should have received a copy of the GNU General Public License | 
|  | 17 | * along with this program.  If not, see <http://www.gnu.org/licenses/>. | 
|  | 18 | */ | 
|  | 19 | #include <linux/kernel.h> | 
| Ming Lei | 417e206 | 2011-08-19 16:57:54 +0800 | [diff] [blame] | 20 | #include <linux/module.h> | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 21 | #include <linux/types.h> | 
|  | 22 | #include <linux/slab.h> | 
|  | 23 | #include <linux/delay.h> | 
|  | 24 | #include <linux/platform_device.h> | 
|  | 25 | #include <linux/clk.h> | 
|  | 26 | #include <linux/dma-mapping.h> | 
|  | 27 | #include <linux/spinlock.h> | 
|  | 28 | #include <linux/gpio.h> | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 29 | #include <plat/usb.h> | 
|  | 30 |  | 
|  | 31 | #define USBHS_DRIVER_NAME	"usbhs-omap" | 
|  | 32 | #define OMAP_EHCI_DEVICE	"ehci-omap" | 
|  | 33 | #define OMAP_OHCI_DEVICE	"ohci-omap3" | 
|  | 34 |  | 
|  | 35 | /* OMAP USBHOST Register addresses  */ | 
|  | 36 |  | 
|  | 37 | /* TLL Register Set */ | 
|  | 38 | #define	OMAP_USBTLL_REVISION				(0x00) | 
|  | 39 | #define	OMAP_USBTLL_SYSCONFIG				(0x10) | 
|  | 40 | #define	OMAP_USBTLL_SYSCONFIG_CACTIVITY			(1 << 8) | 
|  | 41 | #define	OMAP_USBTLL_SYSCONFIG_SIDLEMODE			(1 << 3) | 
|  | 42 | #define	OMAP_USBTLL_SYSCONFIG_ENAWAKEUP			(1 << 2) | 
|  | 43 | #define	OMAP_USBTLL_SYSCONFIG_SOFTRESET			(1 << 1) | 
|  | 44 | #define	OMAP_USBTLL_SYSCONFIG_AUTOIDLE			(1 << 0) | 
|  | 45 |  | 
|  | 46 | #define	OMAP_USBTLL_SYSSTATUS				(0x14) | 
|  | 47 | #define	OMAP_USBTLL_SYSSTATUS_RESETDONE			(1 << 0) | 
|  | 48 |  | 
|  | 49 | #define	OMAP_USBTLL_IRQSTATUS				(0x18) | 
|  | 50 | #define	OMAP_USBTLL_IRQENABLE				(0x1C) | 
|  | 51 |  | 
|  | 52 | #define	OMAP_TLL_SHARED_CONF				(0x30) | 
|  | 53 | #define	OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN		(1 << 6) | 
|  | 54 | #define	OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN		(1 << 5) | 
|  | 55 | #define	OMAP_TLL_SHARED_CONF_USB_DIVRATION		(1 << 2) | 
|  | 56 | #define	OMAP_TLL_SHARED_CONF_FCLK_REQ			(1 << 1) | 
|  | 57 | #define	OMAP_TLL_SHARED_CONF_FCLK_IS_ON			(1 << 0) | 
|  | 58 |  | 
|  | 59 | #define	OMAP_TLL_CHANNEL_CONF(num)			(0x040 + 0x004 * num) | 
|  | 60 | #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT		24 | 
|  | 61 | #define	OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF		(1 << 11) | 
|  | 62 | #define	OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE		(1 << 10) | 
|  | 63 | #define	OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE		(1 << 9) | 
|  | 64 | #define	OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE		(1 << 8) | 
|  | 65 | #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS		(1 << 1) | 
|  | 66 | #define	OMAP_TLL_CHANNEL_CONF_CHANEN			(1 << 0) | 
|  | 67 |  | 
|  | 68 | #define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0		0x0 | 
|  | 69 | #define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM		0x1 | 
|  | 70 | #define OMAP_TLL_FSLSMODE_3PIN_PHY			0x2 | 
|  | 71 | #define OMAP_TLL_FSLSMODE_4PIN_PHY			0x3 | 
|  | 72 | #define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0		0x4 | 
|  | 73 | #define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM		0x5 | 
|  | 74 | #define OMAP_TLL_FSLSMODE_3PIN_TLL			0x6 | 
|  | 75 | #define OMAP_TLL_FSLSMODE_4PIN_TLL			0x7 | 
|  | 76 | #define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0		0xA | 
|  | 77 | #define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM		0xB | 
|  | 78 |  | 
|  | 79 | #define	OMAP_TLL_ULPI_FUNCTION_CTRL(num)		(0x804 + 0x100 * num) | 
|  | 80 | #define	OMAP_TLL_ULPI_INTERFACE_CTRL(num)		(0x807 + 0x100 * num) | 
|  | 81 | #define	OMAP_TLL_ULPI_OTG_CTRL(num)			(0x80A + 0x100 * num) | 
|  | 82 | #define	OMAP_TLL_ULPI_INT_EN_RISE(num)			(0x80D + 0x100 * num) | 
|  | 83 | #define	OMAP_TLL_ULPI_INT_EN_FALL(num)			(0x810 + 0x100 * num) | 
|  | 84 | #define	OMAP_TLL_ULPI_INT_STATUS(num)			(0x813 + 0x100 * num) | 
|  | 85 | #define	OMAP_TLL_ULPI_INT_LATCH(num)			(0x814 + 0x100 * num) | 
|  | 86 | #define	OMAP_TLL_ULPI_DEBUG(num)			(0x815 + 0x100 * num) | 
|  | 87 | #define	OMAP_TLL_ULPI_SCRATCH_REGISTER(num)		(0x816 + 0x100 * num) | 
|  | 88 |  | 
|  | 89 | #define OMAP_TLL_CHANNEL_COUNT				3 | 
|  | 90 | #define OMAP_TLL_CHANNEL_1_EN_MASK			(1 << 0) | 
|  | 91 | #define OMAP_TLL_CHANNEL_2_EN_MASK			(1 << 1) | 
|  | 92 | #define OMAP_TLL_CHANNEL_3_EN_MASK			(1 << 2) | 
|  | 93 |  | 
|  | 94 | /* UHH Register Set */ | 
|  | 95 | #define	OMAP_UHH_REVISION				(0x00) | 
|  | 96 | #define	OMAP_UHH_SYSCONFIG				(0x10) | 
|  | 97 | #define	OMAP_UHH_SYSCONFIG_MIDLEMODE			(1 << 12) | 
|  | 98 | #define	OMAP_UHH_SYSCONFIG_CACTIVITY			(1 << 8) | 
|  | 99 | #define	OMAP_UHH_SYSCONFIG_SIDLEMODE			(1 << 3) | 
|  | 100 | #define	OMAP_UHH_SYSCONFIG_ENAWAKEUP			(1 << 2) | 
|  | 101 | #define	OMAP_UHH_SYSCONFIG_SOFTRESET			(1 << 1) | 
|  | 102 | #define	OMAP_UHH_SYSCONFIG_AUTOIDLE			(1 << 0) | 
|  | 103 |  | 
|  | 104 | #define	OMAP_UHH_SYSSTATUS				(0x14) | 
|  | 105 | #define	OMAP_UHH_HOSTCONFIG				(0x40) | 
|  | 106 | #define	OMAP_UHH_HOSTCONFIG_ULPI_BYPASS			(1 << 0) | 
|  | 107 | #define	OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS		(1 << 0) | 
|  | 108 | #define	OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS		(1 << 11) | 
|  | 109 | #define	OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS		(1 << 12) | 
|  | 110 | #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN		(1 << 2) | 
|  | 111 | #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN		(1 << 3) | 
|  | 112 | #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN		(1 << 4) | 
|  | 113 | #define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN		(1 << 5) | 
|  | 114 | #define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS		(1 << 8) | 
|  | 115 | #define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9) | 
|  | 116 | #define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10) | 
|  | 117 | #define OMAP4_UHH_HOSTCONFIG_APP_START_CLK		(1 << 31) | 
|  | 118 |  | 
|  | 119 | /* OMAP4-specific defines */ | 
|  | 120 | #define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR		(3 << 2) | 
|  | 121 | #define OMAP4_UHH_SYSCONFIG_NOIDLE			(1 << 2) | 
|  | 122 | #define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR		(3 << 4) | 
|  | 123 | #define OMAP4_UHH_SYSCONFIG_NOSTDBY			(1 << 4) | 
|  | 124 | #define OMAP4_UHH_SYSCONFIG_SOFTRESET			(1 << 0) | 
|  | 125 |  | 
|  | 126 | #define OMAP4_P1_MODE_CLEAR				(3 << 16) | 
|  | 127 | #define OMAP4_P1_MODE_TLL				(1 << 16) | 
|  | 128 | #define OMAP4_P1_MODE_HSIC				(3 << 16) | 
|  | 129 | #define OMAP4_P2_MODE_CLEAR				(3 << 18) | 
|  | 130 | #define OMAP4_P2_MODE_TLL				(1 << 18) | 
|  | 131 | #define OMAP4_P2_MODE_HSIC				(3 << 18) | 
|  | 132 |  | 
|  | 133 | #define OMAP_REV2_TLL_CHANNEL_COUNT			2 | 
|  | 134 |  | 
|  | 135 | #define	OMAP_UHH_DEBUG_CSR				(0x44) | 
|  | 136 |  | 
|  | 137 | /* Values of UHH_REVISION - Note: these are not given in the TRM */ | 
|  | 138 | #define OMAP_USBHS_REV1		0x00000010	/* OMAP3 */ | 
|  | 139 | #define OMAP_USBHS_REV2		0x50700100	/* OMAP4 */ | 
|  | 140 |  | 
|  | 141 | #define is_omap_usbhs_rev1(x)	(x->usbhs_rev == OMAP_USBHS_REV1) | 
|  | 142 | #define is_omap_usbhs_rev2(x)	(x->usbhs_rev == OMAP_USBHS_REV2) | 
|  | 143 |  | 
|  | 144 | #define is_ehci_phy_mode(x)	(x == OMAP_EHCI_PORT_MODE_PHY) | 
|  | 145 | #define is_ehci_tll_mode(x)	(x == OMAP_EHCI_PORT_MODE_TLL) | 
|  | 146 | #define is_ehci_hsic_mode(x)	(x == OMAP_EHCI_PORT_MODE_HSIC) | 
|  | 147 |  | 
|  | 148 |  | 
|  | 149 | struct usbhs_hcd_omap { | 
| Keshava Munegowda | 8f2df01 | 2011-06-20 15:22:56 +0200 | [diff] [blame] | 150 | struct clk			*usbhost_ick; | 
|  | 151 | struct clk			*usbhost_hs_fck; | 
|  | 152 | struct clk			*usbhost_fs_fck; | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 153 | struct clk			*xclk60mhsp1_ck; | 
|  | 154 | struct clk			*xclk60mhsp2_ck; | 
|  | 155 | struct clk			*utmi_p1_fck; | 
|  | 156 | struct clk			*usbhost_p1_fck; | 
|  | 157 | struct clk			*usbtll_p1_fck; | 
|  | 158 | struct clk			*utmi_p2_fck; | 
|  | 159 | struct clk			*usbhost_p2_fck; | 
|  | 160 | struct clk			*usbtll_p2_fck; | 
|  | 161 | struct clk			*init_60m_fclk; | 
| Keshava Munegowda | 8f2df01 | 2011-06-20 15:22:56 +0200 | [diff] [blame] | 162 | struct clk			*usbtll_fck; | 
|  | 163 | struct clk			*usbtll_ick; | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 164 |  | 
|  | 165 | void __iomem			*uhh_base; | 
|  | 166 | void __iomem			*tll_base; | 
|  | 167 |  | 
|  | 168 | struct usbhs_omap_platform_data	platdata; | 
|  | 169 |  | 
|  | 170 | u32				usbhs_rev; | 
|  | 171 | spinlock_t			lock; | 
|  | 172 | int				count; | 
|  | 173 | }; | 
|  | 174 | /*-------------------------------------------------------------------------*/ | 
|  | 175 |  | 
|  | 176 | const char usbhs_driver_name[] = USBHS_DRIVER_NAME; | 
|  | 177 | static u64 usbhs_dmamask = ~(u32)0; | 
|  | 178 |  | 
|  | 179 | /*-------------------------------------------------------------------------*/ | 
|  | 180 |  | 
|  | 181 | static inline void usbhs_write(void __iomem *base, u32 reg, u32 val) | 
|  | 182 | { | 
|  | 183 | __raw_writel(val, base + reg); | 
|  | 184 | } | 
|  | 185 |  | 
|  | 186 | static inline u32 usbhs_read(void __iomem *base, u32 reg) | 
|  | 187 | { | 
|  | 188 | return __raw_readl(base + reg); | 
|  | 189 | } | 
|  | 190 |  | 
|  | 191 | static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val) | 
|  | 192 | { | 
|  | 193 | __raw_writeb(val, base + reg); | 
|  | 194 | } | 
|  | 195 |  | 
|  | 196 | static inline u8 usbhs_readb(void __iomem *base, u8 reg) | 
|  | 197 | { | 
|  | 198 | return __raw_readb(base + reg); | 
|  | 199 | } | 
|  | 200 |  | 
|  | 201 | /*-------------------------------------------------------------------------*/ | 
|  | 202 |  | 
|  | 203 | static struct platform_device *omap_usbhs_alloc_child(const char *name, | 
|  | 204 | struct resource	*res, int num_resources, void *pdata, | 
|  | 205 | size_t pdata_size, struct device *dev) | 
|  | 206 | { | 
|  | 207 | struct platform_device	*child; | 
|  | 208 | int			ret; | 
|  | 209 |  | 
|  | 210 | child = platform_device_alloc(name, 0); | 
|  | 211 |  | 
|  | 212 | if (!child) { | 
|  | 213 | dev_err(dev, "platform_device_alloc %s failed\n", name); | 
|  | 214 | goto err_end; | 
|  | 215 | } | 
|  | 216 |  | 
|  | 217 | ret = platform_device_add_resources(child, res, num_resources); | 
|  | 218 | if (ret) { | 
|  | 219 | dev_err(dev, "platform_device_add_resources failed\n"); | 
|  | 220 | goto err_alloc; | 
|  | 221 | } | 
|  | 222 |  | 
|  | 223 | ret = platform_device_add_data(child, pdata, pdata_size); | 
|  | 224 | if (ret) { | 
|  | 225 | dev_err(dev, "platform_device_add_data failed\n"); | 
|  | 226 | goto err_alloc; | 
|  | 227 | } | 
|  | 228 |  | 
|  | 229 | child->dev.dma_mask		= &usbhs_dmamask; | 
|  | 230 | child->dev.coherent_dma_mask	= 0xffffffff; | 
|  | 231 | child->dev.parent		= dev; | 
|  | 232 |  | 
|  | 233 | ret = platform_device_add(child); | 
|  | 234 | if (ret) { | 
|  | 235 | dev_err(dev, "platform_device_add failed\n"); | 
|  | 236 | goto err_alloc; | 
|  | 237 | } | 
|  | 238 |  | 
|  | 239 | return child; | 
|  | 240 |  | 
|  | 241 | err_alloc: | 
|  | 242 | platform_device_put(child); | 
|  | 243 |  | 
|  | 244 | err_end: | 
|  | 245 | return NULL; | 
|  | 246 | } | 
|  | 247 |  | 
|  | 248 | static int omap_usbhs_alloc_children(struct platform_device *pdev) | 
|  | 249 | { | 
|  | 250 | struct device				*dev = &pdev->dev; | 
|  | 251 | struct usbhs_hcd_omap			*omap; | 
|  | 252 | struct ehci_hcd_omap_platform_data	*ehci_data; | 
|  | 253 | struct ohci_hcd_omap_platform_data	*ohci_data; | 
|  | 254 | struct platform_device			*ehci; | 
|  | 255 | struct platform_device			*ohci; | 
|  | 256 | struct resource				*res; | 
|  | 257 | struct resource				resources[2]; | 
|  | 258 | int					ret; | 
|  | 259 |  | 
|  | 260 | omap = platform_get_drvdata(pdev); | 
|  | 261 | ehci_data = omap->platdata.ehci_data; | 
|  | 262 | ohci_data = omap->platdata.ohci_data; | 
|  | 263 |  | 
|  | 264 | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci"); | 
|  | 265 | if (!res) { | 
|  | 266 | dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n"); | 
|  | 267 | ret = -ENODEV; | 
|  | 268 | goto err_end; | 
|  | 269 | } | 
|  | 270 | resources[0] = *res; | 
|  | 271 |  | 
|  | 272 | res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq"); | 
|  | 273 | if (!res) { | 
|  | 274 | dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n"); | 
|  | 275 | ret = -ENODEV; | 
|  | 276 | goto err_end; | 
|  | 277 | } | 
|  | 278 | resources[1] = *res; | 
|  | 279 |  | 
|  | 280 | ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, ehci_data, | 
|  | 281 | sizeof(*ehci_data), dev); | 
|  | 282 |  | 
|  | 283 | if (!ehci) { | 
|  | 284 | dev_err(dev, "omap_usbhs_alloc_child failed\n"); | 
| Axel Lin | d910774 | 2011-05-14 14:15:36 +0800 | [diff] [blame] | 285 | ret = -ENOMEM; | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 286 | goto err_end; | 
|  | 287 | } | 
|  | 288 |  | 
|  | 289 | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci"); | 
|  | 290 | if (!res) { | 
|  | 291 | dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n"); | 
|  | 292 | ret = -ENODEV; | 
|  | 293 | goto err_ehci; | 
|  | 294 | } | 
|  | 295 | resources[0] = *res; | 
|  | 296 |  | 
|  | 297 | res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq"); | 
|  | 298 | if (!res) { | 
|  | 299 | dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n"); | 
|  | 300 | ret = -ENODEV; | 
|  | 301 | goto err_ehci; | 
|  | 302 | } | 
|  | 303 | resources[1] = *res; | 
|  | 304 |  | 
|  | 305 | ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, ohci_data, | 
|  | 306 | sizeof(*ohci_data), dev); | 
|  | 307 | if (!ohci) { | 
|  | 308 | dev_err(dev, "omap_usbhs_alloc_child failed\n"); | 
| Axel Lin | d910774 | 2011-05-14 14:15:36 +0800 | [diff] [blame] | 309 | ret = -ENOMEM; | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 310 | goto err_ehci; | 
|  | 311 | } | 
|  | 312 |  | 
|  | 313 | return 0; | 
|  | 314 |  | 
|  | 315 | err_ehci: | 
| Axel Lin | d910774 | 2011-05-14 14:15:36 +0800 | [diff] [blame] | 316 | platform_device_unregister(ehci); | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 317 |  | 
|  | 318 | err_end: | 
|  | 319 | return ret; | 
|  | 320 | } | 
|  | 321 |  | 
|  | 322 | /** | 
|  | 323 | * usbhs_omap_probe - initialize TI-based HCDs | 
|  | 324 | * | 
|  | 325 | * Allocates basic resources for this USB host controller. | 
|  | 326 | */ | 
|  | 327 | static int __devinit usbhs_omap_probe(struct platform_device *pdev) | 
|  | 328 | { | 
|  | 329 | struct device			*dev =  &pdev->dev; | 
|  | 330 | struct usbhs_omap_platform_data	*pdata = dev->platform_data; | 
|  | 331 | struct usbhs_hcd_omap		*omap; | 
|  | 332 | struct resource			*res; | 
|  | 333 | int				ret = 0; | 
|  | 334 | int				i; | 
|  | 335 |  | 
|  | 336 | if (!pdata) { | 
| Lucas De Marchi | 25985ed | 2011-03-30 22:57:33 -0300 | [diff] [blame] | 337 | dev_err(dev, "Missing platform data\n"); | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 338 | ret = -ENOMEM; | 
|  | 339 | goto end_probe; | 
|  | 340 | } | 
|  | 341 |  | 
|  | 342 | omap = kzalloc(sizeof(*omap), GFP_KERNEL); | 
|  | 343 | if (!omap) { | 
|  | 344 | dev_err(dev, "Memory allocation failed\n"); | 
|  | 345 | ret = -ENOMEM; | 
|  | 346 | goto end_probe; | 
|  | 347 | } | 
|  | 348 |  | 
|  | 349 | spin_lock_init(&omap->lock); | 
|  | 350 |  | 
|  | 351 | for (i = 0; i < OMAP3_HS_USB_PORTS; i++) | 
|  | 352 | omap->platdata.port_mode[i] = pdata->port_mode[i]; | 
|  | 353 |  | 
|  | 354 | omap->platdata.ehci_data = pdata->ehci_data; | 
|  | 355 | omap->platdata.ohci_data = pdata->ohci_data; | 
|  | 356 |  | 
| Keshava Munegowda | 8f2df01 | 2011-06-20 15:22:56 +0200 | [diff] [blame] | 357 | omap->usbhost_ick = clk_get(dev, "usbhost_ick"); | 
|  | 358 | if (IS_ERR(omap->usbhost_ick)) { | 
|  | 359 | ret =  PTR_ERR(omap->usbhost_ick); | 
|  | 360 | dev_err(dev, "usbhost_ick failed error:%d\n", ret); | 
|  | 361 | goto err_end; | 
|  | 362 | } | 
|  | 363 |  | 
|  | 364 | omap->usbhost_hs_fck = clk_get(dev, "hs_fck"); | 
|  | 365 | if (IS_ERR(omap->usbhost_hs_fck)) { | 
|  | 366 | ret = PTR_ERR(omap->usbhost_hs_fck); | 
|  | 367 | dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret); | 
|  | 368 | goto err_usbhost_ick; | 
|  | 369 | } | 
|  | 370 |  | 
|  | 371 | omap->usbhost_fs_fck = clk_get(dev, "fs_fck"); | 
|  | 372 | if (IS_ERR(omap->usbhost_fs_fck)) { | 
|  | 373 | ret = PTR_ERR(omap->usbhost_fs_fck); | 
|  | 374 | dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret); | 
|  | 375 | goto err_usbhost_hs_fck; | 
|  | 376 | } | 
|  | 377 |  | 
|  | 378 | omap->usbtll_fck = clk_get(dev, "usbtll_fck"); | 
|  | 379 | if (IS_ERR(omap->usbtll_fck)) { | 
|  | 380 | ret = PTR_ERR(omap->usbtll_fck); | 
|  | 381 | dev_err(dev, "usbtll_fck failed error:%d\n", ret); | 
|  | 382 | goto err_usbhost_fs_fck; | 
|  | 383 | } | 
|  | 384 |  | 
|  | 385 | omap->usbtll_ick = clk_get(dev, "usbtll_ick"); | 
|  | 386 | if (IS_ERR(omap->usbtll_ick)) { | 
|  | 387 | ret = PTR_ERR(omap->usbtll_ick); | 
|  | 388 | dev_err(dev, "usbtll_ick failed error:%d\n", ret); | 
|  | 389 | goto err_usbtll_fck; | 
|  | 390 | } | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 391 |  | 
|  | 392 | omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); | 
|  | 393 | if (IS_ERR(omap->utmi_p1_fck)) { | 
|  | 394 | ret = PTR_ERR(omap->utmi_p1_fck); | 
|  | 395 | dev_err(dev, "utmi_p1_gfclk failed error:%d\n",	ret); | 
| Keshava Munegowda | 8f2df01 | 2011-06-20 15:22:56 +0200 | [diff] [blame] | 396 | goto err_usbtll_ick; | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 397 | } | 
|  | 398 |  | 
|  | 399 | omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); | 
|  | 400 | if (IS_ERR(omap->xclk60mhsp1_ck)) { | 
|  | 401 | ret = PTR_ERR(omap->xclk60mhsp1_ck); | 
|  | 402 | dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret); | 
|  | 403 | goto err_utmi_p1_fck; | 
|  | 404 | } | 
|  | 405 |  | 
|  | 406 | omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk"); | 
|  | 407 | if (IS_ERR(omap->utmi_p2_fck)) { | 
|  | 408 | ret = PTR_ERR(omap->utmi_p2_fck); | 
|  | 409 | dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); | 
|  | 410 | goto err_xclk60mhsp1_ck; | 
|  | 411 | } | 
|  | 412 |  | 
|  | 413 | omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck"); | 
|  | 414 | if (IS_ERR(omap->xclk60mhsp2_ck)) { | 
|  | 415 | ret = PTR_ERR(omap->xclk60mhsp2_ck); | 
|  | 416 | dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret); | 
|  | 417 | goto err_utmi_p2_fck; | 
|  | 418 | } | 
|  | 419 |  | 
|  | 420 | omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk"); | 
|  | 421 | if (IS_ERR(omap->usbhost_p1_fck)) { | 
|  | 422 | ret = PTR_ERR(omap->usbhost_p1_fck); | 
|  | 423 | dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret); | 
|  | 424 | goto err_xclk60mhsp2_ck; | 
|  | 425 | } | 
|  | 426 |  | 
|  | 427 | omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk"); | 
|  | 428 | if (IS_ERR(omap->usbtll_p1_fck)) { | 
|  | 429 | ret = PTR_ERR(omap->usbtll_p1_fck); | 
|  | 430 | dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret); | 
|  | 431 | goto err_usbhost_p1_fck; | 
|  | 432 | } | 
|  | 433 |  | 
|  | 434 | omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk"); | 
|  | 435 | if (IS_ERR(omap->usbhost_p2_fck)) { | 
|  | 436 | ret = PTR_ERR(omap->usbhost_p2_fck); | 
|  | 437 | dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret); | 
|  | 438 | goto err_usbtll_p1_fck; | 
|  | 439 | } | 
|  | 440 |  | 
|  | 441 | omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk"); | 
|  | 442 | if (IS_ERR(omap->usbtll_p2_fck)) { | 
|  | 443 | ret = PTR_ERR(omap->usbtll_p2_fck); | 
|  | 444 | dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret); | 
|  | 445 | goto err_usbhost_p2_fck; | 
|  | 446 | } | 
|  | 447 |  | 
|  | 448 | omap->init_60m_fclk = clk_get(dev, "init_60m_fclk"); | 
|  | 449 | if (IS_ERR(omap->init_60m_fclk)) { | 
|  | 450 | ret = PTR_ERR(omap->init_60m_fclk); | 
|  | 451 | dev_err(dev, "init_60m_fclk failed error:%d\n", ret); | 
|  | 452 | goto err_usbtll_p2_fck; | 
|  | 453 | } | 
|  | 454 |  | 
|  | 455 | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh"); | 
|  | 456 | if (!res) { | 
|  | 457 | dev_err(dev, "UHH EHCI get resource failed\n"); | 
|  | 458 | ret = -ENODEV; | 
|  | 459 | goto err_init_60m_fclk; | 
|  | 460 | } | 
|  | 461 |  | 
|  | 462 | omap->uhh_base = ioremap(res->start, resource_size(res)); | 
|  | 463 | if (!omap->uhh_base) { | 
|  | 464 | dev_err(dev, "UHH ioremap failed\n"); | 
|  | 465 | ret = -ENOMEM; | 
|  | 466 | goto err_init_60m_fclk; | 
|  | 467 | } | 
|  | 468 |  | 
|  | 469 | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll"); | 
|  | 470 | if (!res) { | 
|  | 471 | dev_err(dev, "UHH EHCI get resource failed\n"); | 
|  | 472 | ret = -ENODEV; | 
|  | 473 | goto err_tll; | 
|  | 474 | } | 
|  | 475 |  | 
|  | 476 | omap->tll_base = ioremap(res->start, resource_size(res)); | 
|  | 477 | if (!omap->tll_base) { | 
|  | 478 | dev_err(dev, "TLL ioremap failed\n"); | 
|  | 479 | ret = -ENOMEM; | 
|  | 480 | goto err_tll; | 
|  | 481 | } | 
|  | 482 |  | 
|  | 483 | platform_set_drvdata(pdev, omap); | 
|  | 484 |  | 
|  | 485 | ret = omap_usbhs_alloc_children(pdev); | 
|  | 486 | if (ret) { | 
|  | 487 | dev_err(dev, "omap_usbhs_alloc_children failed\n"); | 
|  | 488 | goto err_alloc; | 
|  | 489 | } | 
|  | 490 |  | 
|  | 491 | goto end_probe; | 
|  | 492 |  | 
|  | 493 | err_alloc: | 
|  | 494 | iounmap(omap->tll_base); | 
|  | 495 |  | 
|  | 496 | err_tll: | 
|  | 497 | iounmap(omap->uhh_base); | 
|  | 498 |  | 
|  | 499 | err_init_60m_fclk: | 
|  | 500 | clk_put(omap->init_60m_fclk); | 
|  | 501 |  | 
|  | 502 | err_usbtll_p2_fck: | 
|  | 503 | clk_put(omap->usbtll_p2_fck); | 
|  | 504 |  | 
|  | 505 | err_usbhost_p2_fck: | 
|  | 506 | clk_put(omap->usbhost_p2_fck); | 
|  | 507 |  | 
|  | 508 | err_usbtll_p1_fck: | 
|  | 509 | clk_put(omap->usbtll_p1_fck); | 
|  | 510 |  | 
|  | 511 | err_usbhost_p1_fck: | 
|  | 512 | clk_put(omap->usbhost_p1_fck); | 
|  | 513 |  | 
|  | 514 | err_xclk60mhsp2_ck: | 
|  | 515 | clk_put(omap->xclk60mhsp2_ck); | 
|  | 516 |  | 
|  | 517 | err_utmi_p2_fck: | 
|  | 518 | clk_put(omap->utmi_p2_fck); | 
|  | 519 |  | 
|  | 520 | err_xclk60mhsp1_ck: | 
|  | 521 | clk_put(omap->xclk60mhsp1_ck); | 
|  | 522 |  | 
|  | 523 | err_utmi_p1_fck: | 
|  | 524 | clk_put(omap->utmi_p1_fck); | 
|  | 525 |  | 
| Keshava Munegowda | 8f2df01 | 2011-06-20 15:22:56 +0200 | [diff] [blame] | 526 | err_usbtll_ick: | 
|  | 527 | clk_put(omap->usbtll_ick); | 
|  | 528 |  | 
|  | 529 | err_usbtll_fck: | 
|  | 530 | clk_put(omap->usbtll_fck); | 
|  | 531 |  | 
|  | 532 | err_usbhost_fs_fck: | 
|  | 533 | clk_put(omap->usbhost_fs_fck); | 
|  | 534 |  | 
|  | 535 | err_usbhost_hs_fck: | 
|  | 536 | clk_put(omap->usbhost_hs_fck); | 
|  | 537 |  | 
|  | 538 | err_usbhost_ick: | 
|  | 539 | clk_put(omap->usbhost_ick); | 
|  | 540 |  | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 541 | err_end: | 
|  | 542 | kfree(omap); | 
|  | 543 |  | 
|  | 544 | end_probe: | 
|  | 545 | return ret; | 
|  | 546 | } | 
|  | 547 |  | 
|  | 548 | /** | 
|  | 549 | * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs | 
|  | 550 | * @pdev: USB Host Controller being removed | 
|  | 551 | * | 
|  | 552 | * Reverses the effect of usbhs_omap_probe(). | 
|  | 553 | */ | 
|  | 554 | static int __devexit usbhs_omap_remove(struct platform_device *pdev) | 
|  | 555 | { | 
|  | 556 | struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev); | 
|  | 557 |  | 
|  | 558 | if (omap->count != 0) { | 
|  | 559 | dev_err(&pdev->dev, | 
|  | 560 | "Either EHCI or OHCI is still using usbhs core\n"); | 
|  | 561 | return -EBUSY; | 
|  | 562 | } | 
|  | 563 |  | 
|  | 564 | iounmap(omap->tll_base); | 
|  | 565 | iounmap(omap->uhh_base); | 
|  | 566 | clk_put(omap->init_60m_fclk); | 
|  | 567 | clk_put(omap->usbtll_p2_fck); | 
|  | 568 | clk_put(omap->usbhost_p2_fck); | 
|  | 569 | clk_put(omap->usbtll_p1_fck); | 
|  | 570 | clk_put(omap->usbhost_p1_fck); | 
|  | 571 | clk_put(omap->xclk60mhsp2_ck); | 
|  | 572 | clk_put(omap->utmi_p2_fck); | 
|  | 573 | clk_put(omap->xclk60mhsp1_ck); | 
|  | 574 | clk_put(omap->utmi_p1_fck); | 
| Keshava Munegowda | 8f2df01 | 2011-06-20 15:22:56 +0200 | [diff] [blame] | 575 | clk_put(omap->usbtll_ick); | 
|  | 576 | clk_put(omap->usbtll_fck); | 
|  | 577 | clk_put(omap->usbhost_fs_fck); | 
|  | 578 | clk_put(omap->usbhost_hs_fck); | 
|  | 579 | clk_put(omap->usbhost_ick); | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 580 | kfree(omap); | 
|  | 581 |  | 
|  | 582 | return 0; | 
|  | 583 | } | 
|  | 584 |  | 
|  | 585 | static bool is_ohci_port(enum usbhs_omap_port_mode pmode) | 
|  | 586 | { | 
|  | 587 | switch (pmode) { | 
|  | 588 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: | 
|  | 589 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: | 
|  | 590 | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: | 
|  | 591 | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: | 
|  | 592 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: | 
|  | 593 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: | 
|  | 594 | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: | 
|  | 595 | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: | 
|  | 596 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: | 
|  | 597 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: | 
|  | 598 | return true; | 
|  | 599 |  | 
|  | 600 | default: | 
|  | 601 | return false; | 
|  | 602 | } | 
|  | 603 | } | 
|  | 604 |  | 
|  | 605 | /* | 
|  | 606 | * convert the port-mode enum to a value we can use in the FSLSMODE | 
|  | 607 | * field of USBTLL_CHANNEL_CONF | 
|  | 608 | */ | 
|  | 609 | static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode) | 
|  | 610 | { | 
|  | 611 | switch (mode) { | 
|  | 612 | case OMAP_USBHS_PORT_MODE_UNUSED: | 
|  | 613 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: | 
|  | 614 | return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; | 
|  | 615 |  | 
|  | 616 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: | 
|  | 617 | return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM; | 
|  | 618 |  | 
|  | 619 | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: | 
|  | 620 | return OMAP_TLL_FSLSMODE_3PIN_PHY; | 
|  | 621 |  | 
|  | 622 | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: | 
|  | 623 | return OMAP_TLL_FSLSMODE_4PIN_PHY; | 
|  | 624 |  | 
|  | 625 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: | 
|  | 626 | return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0; | 
|  | 627 |  | 
|  | 628 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: | 
|  | 629 | return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM; | 
|  | 630 |  | 
|  | 631 | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: | 
|  | 632 | return OMAP_TLL_FSLSMODE_3PIN_TLL; | 
|  | 633 |  | 
|  | 634 | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: | 
|  | 635 | return OMAP_TLL_FSLSMODE_4PIN_TLL; | 
|  | 636 |  | 
|  | 637 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: | 
|  | 638 | return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0; | 
|  | 639 |  | 
|  | 640 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: | 
|  | 641 | return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM; | 
|  | 642 | default: | 
|  | 643 | pr_warning("Invalid port mode, using default\n"); | 
|  | 644 | return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; | 
|  | 645 | } | 
|  | 646 | } | 
|  | 647 |  | 
|  | 648 | static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count) | 
|  | 649 | { | 
|  | 650 | struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev); | 
|  | 651 | struct usbhs_omap_platform_data	*pdata = dev->platform_data; | 
|  | 652 | unsigned			reg; | 
|  | 653 | int				i; | 
|  | 654 |  | 
|  | 655 | /* Program Common TLL register */ | 
|  | 656 | reg = usbhs_read(omap->tll_base, OMAP_TLL_SHARED_CONF); | 
|  | 657 | reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON | 
|  | 658 | | OMAP_TLL_SHARED_CONF_USB_DIVRATION); | 
|  | 659 | reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; | 
|  | 660 | reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN; | 
|  | 661 |  | 
|  | 662 | usbhs_write(omap->tll_base, OMAP_TLL_SHARED_CONF, reg); | 
|  | 663 |  | 
|  | 664 | /* Enable channels now */ | 
|  | 665 | for (i = 0; i < tll_channel_count; i++) { | 
|  | 666 | reg = usbhs_read(omap->tll_base, | 
|  | 667 | OMAP_TLL_CHANNEL_CONF(i)); | 
|  | 668 |  | 
|  | 669 | if (is_ohci_port(pdata->port_mode[i])) { | 
|  | 670 | reg |= ohci_omap3_fslsmode(pdata->port_mode[i]) | 
|  | 671 | << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT; | 
|  | 672 | reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS; | 
|  | 673 | } else if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_TLL) { | 
|  | 674 |  | 
|  | 675 | /* Disable AutoIdle, BitStuffing and use SDR Mode */ | 
|  | 676 | reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE | 
|  | 677 | | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF | 
|  | 678 | | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); | 
|  | 679 |  | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 680 | } else | 
|  | 681 | continue; | 
|  | 682 |  | 
|  | 683 | reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; | 
|  | 684 | usbhs_write(omap->tll_base, | 
|  | 685 | OMAP_TLL_CHANNEL_CONF(i), reg); | 
|  | 686 |  | 
|  | 687 | usbhs_writeb(omap->tll_base, | 
|  | 688 | OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe); | 
|  | 689 | } | 
|  | 690 | } | 
|  | 691 |  | 
|  | 692 | static int usbhs_enable(struct device *dev) | 
|  | 693 | { | 
|  | 694 | struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev); | 
|  | 695 | struct usbhs_omap_platform_data	*pdata = &omap->platdata; | 
|  | 696 | unsigned long			flags = 0; | 
|  | 697 | int				ret = 0; | 
| Keshava Munegowda | 8f2df01 | 2011-06-20 15:22:56 +0200 | [diff] [blame] | 698 | unsigned long			timeout; | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 699 | unsigned			reg; | 
|  | 700 |  | 
|  | 701 | dev_dbg(dev, "starting TI HSUSB Controller\n"); | 
|  | 702 | if (!pdata) { | 
|  | 703 | dev_dbg(dev, "missing platform_data\n"); | 
| Axel Lin | d11536e | 2011-04-21 19:52:41 +0530 | [diff] [blame] | 704 | return  -ENODEV; | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 705 | } | 
|  | 706 |  | 
|  | 707 | spin_lock_irqsave(&omap->lock, flags); | 
|  | 708 | if (omap->count > 0) | 
|  | 709 | goto end_count; | 
|  | 710 |  | 
| Keshava Munegowda | 8f2df01 | 2011-06-20 15:22:56 +0200 | [diff] [blame] | 711 | clk_enable(omap->usbhost_ick); | 
|  | 712 | clk_enable(omap->usbhost_hs_fck); | 
|  | 713 | clk_enable(omap->usbhost_fs_fck); | 
|  | 714 | clk_enable(omap->usbtll_fck); | 
|  | 715 | clk_enable(omap->usbtll_ick); | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 716 |  | 
|  | 717 | if (pdata->ehci_data->phy_reset) { | 
|  | 718 | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) { | 
|  | 719 | gpio_request(pdata->ehci_data->reset_gpio_port[0], | 
|  | 720 | "USB1 PHY reset"); | 
|  | 721 | gpio_direction_output | 
| Juergen Kilb | 557f447 | 2011-04-14 09:31:43 +0200 | [diff] [blame] | 722 | (pdata->ehci_data->reset_gpio_port[0], 0); | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 723 | } | 
|  | 724 |  | 
|  | 725 | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) { | 
|  | 726 | gpio_request(pdata->ehci_data->reset_gpio_port[1], | 
|  | 727 | "USB2 PHY reset"); | 
|  | 728 | gpio_direction_output | 
| Juergen Kilb | 557f447 | 2011-04-14 09:31:43 +0200 | [diff] [blame] | 729 | (pdata->ehci_data->reset_gpio_port[1], 0); | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 730 | } | 
|  | 731 |  | 
|  | 732 | /* Hold the PHY in RESET for enough time till DIR is high */ | 
|  | 733 | udelay(10); | 
|  | 734 | } | 
|  | 735 |  | 
|  | 736 | omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); | 
|  | 737 | dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev); | 
|  | 738 |  | 
| Keshava Munegowda | 8f2df01 | 2011-06-20 15:22:56 +0200 | [diff] [blame] | 739 | /* perform TLL soft reset, and wait until reset is complete */ | 
|  | 740 | usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, | 
|  | 741 | OMAP_USBTLL_SYSCONFIG_SOFTRESET); | 
|  | 742 |  | 
|  | 743 | /* Wait for TLL reset to complete */ | 
|  | 744 | timeout = jiffies + msecs_to_jiffies(1000); | 
|  | 745 | while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS) | 
|  | 746 | & OMAP_USBTLL_SYSSTATUS_RESETDONE)) { | 
|  | 747 | cpu_relax(); | 
|  | 748 |  | 
|  | 749 | if (time_after(jiffies, timeout)) { | 
|  | 750 | dev_dbg(dev, "operation timed out\n"); | 
|  | 751 | ret = -EINVAL; | 
|  | 752 | goto err_tll; | 
|  | 753 | } | 
|  | 754 | } | 
|  | 755 |  | 
|  | 756 | dev_dbg(dev, "TLL RESET DONE\n"); | 
|  | 757 |  | 
|  | 758 | /* (1<<3) = no idle mode only for initial debugging */ | 
|  | 759 | usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, | 
|  | 760 | OMAP_USBTLL_SYSCONFIG_ENAWAKEUP | | 
|  | 761 | OMAP_USBTLL_SYSCONFIG_SIDLEMODE | | 
|  | 762 | OMAP_USBTLL_SYSCONFIG_AUTOIDLE); | 
|  | 763 |  | 
|  | 764 | /* Put UHH in NoIdle/NoStandby mode */ | 
|  | 765 | reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG); | 
|  | 766 | if (is_omap_usbhs_rev1(omap)) { | 
|  | 767 | reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP | 
|  | 768 | | OMAP_UHH_SYSCONFIG_SIDLEMODE | 
|  | 769 | | OMAP_UHH_SYSCONFIG_CACTIVITY | 
|  | 770 | | OMAP_UHH_SYSCONFIG_MIDLEMODE); | 
|  | 771 | reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE; | 
|  | 772 |  | 
|  | 773 |  | 
|  | 774 | } else if (is_omap_usbhs_rev2(omap)) { | 
|  | 775 | reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR; | 
|  | 776 | reg |= OMAP4_UHH_SYSCONFIG_NOIDLE; | 
|  | 777 | reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR; | 
|  | 778 | reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY; | 
|  | 779 | } | 
|  | 780 |  | 
|  | 781 | usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); | 
|  | 782 |  | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 783 | reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG); | 
|  | 784 | /* setup ULPI bypass and burst configurations */ | 
|  | 785 | reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN | 
|  | 786 | | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN | 
|  | 787 | | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); | 
|  | 788 | reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK; | 
|  | 789 | reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; | 
|  | 790 |  | 
|  | 791 | if (is_omap_usbhs_rev1(omap)) { | 
|  | 792 | if (pdata->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED) | 
|  | 793 | reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; | 
|  | 794 | if (pdata->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED) | 
|  | 795 | reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; | 
|  | 796 | if (pdata->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED) | 
|  | 797 | reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; | 
|  | 798 |  | 
|  | 799 | /* Bypass the TLL module for PHY mode operation */ | 
|  | 800 | if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) { | 
|  | 801 | dev_dbg(dev, "OMAP3 ES version <= ES2.1\n"); | 
|  | 802 | if (is_ehci_phy_mode(pdata->port_mode[0]) || | 
|  | 803 | is_ehci_phy_mode(pdata->port_mode[1]) || | 
|  | 804 | is_ehci_phy_mode(pdata->port_mode[2])) | 
|  | 805 | reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; | 
|  | 806 | else | 
|  | 807 | reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; | 
|  | 808 | } else { | 
|  | 809 | dev_dbg(dev, "OMAP3 ES version > ES2.1\n"); | 
|  | 810 | if (is_ehci_phy_mode(pdata->port_mode[0])) | 
|  | 811 | reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; | 
|  | 812 | else | 
|  | 813 | reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; | 
|  | 814 | if (is_ehci_phy_mode(pdata->port_mode[1])) | 
|  | 815 | reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; | 
|  | 816 | else | 
|  | 817 | reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; | 
|  | 818 | if (is_ehci_phy_mode(pdata->port_mode[2])) | 
|  | 819 | reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; | 
|  | 820 | else | 
|  | 821 | reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; | 
|  | 822 | } | 
|  | 823 | } else if (is_omap_usbhs_rev2(omap)) { | 
|  | 824 | /* Clear port mode fields for PHY mode*/ | 
|  | 825 | reg &= ~OMAP4_P1_MODE_CLEAR; | 
|  | 826 | reg &= ~OMAP4_P2_MODE_CLEAR; | 
|  | 827 |  | 
|  | 828 | if (is_ehci_phy_mode(pdata->port_mode[0])) { | 
|  | 829 | ret = clk_set_parent(omap->utmi_p1_fck, | 
|  | 830 | omap->xclk60mhsp1_ck); | 
|  | 831 | if (ret != 0) { | 
|  | 832 | dev_err(dev, "xclk60mhsp1_ck set parent" | 
|  | 833 | "failed error:%d\n", ret); | 
|  | 834 | goto err_tll; | 
|  | 835 | } | 
|  | 836 | } else if (is_ehci_tll_mode(pdata->port_mode[0])) { | 
|  | 837 | ret = clk_set_parent(omap->utmi_p1_fck, | 
|  | 838 | omap->init_60m_fclk); | 
|  | 839 | if (ret != 0) { | 
|  | 840 | dev_err(dev, "init_60m_fclk set parent" | 
|  | 841 | "failed error:%d\n", ret); | 
|  | 842 | goto err_tll; | 
|  | 843 | } | 
|  | 844 | clk_enable(omap->usbhost_p1_fck); | 
|  | 845 | clk_enable(omap->usbtll_p1_fck); | 
|  | 846 | } | 
|  | 847 |  | 
|  | 848 | if (is_ehci_phy_mode(pdata->port_mode[1])) { | 
|  | 849 | ret = clk_set_parent(omap->utmi_p2_fck, | 
|  | 850 | omap->xclk60mhsp2_ck); | 
|  | 851 | if (ret != 0) { | 
|  | 852 | dev_err(dev, "xclk60mhsp1_ck set parent" | 
|  | 853 | "failed error:%d\n", ret); | 
|  | 854 | goto err_tll; | 
|  | 855 | } | 
|  | 856 | } else if (is_ehci_tll_mode(pdata->port_mode[1])) { | 
|  | 857 | ret = clk_set_parent(omap->utmi_p2_fck, | 
|  | 858 | omap->init_60m_fclk); | 
|  | 859 | if (ret != 0) { | 
|  | 860 | dev_err(dev, "init_60m_fclk set parent" | 
|  | 861 | "failed error:%d\n", ret); | 
|  | 862 | goto err_tll; | 
|  | 863 | } | 
|  | 864 | clk_enable(omap->usbhost_p2_fck); | 
|  | 865 | clk_enable(omap->usbtll_p2_fck); | 
|  | 866 | } | 
|  | 867 |  | 
|  | 868 | clk_enable(omap->utmi_p1_fck); | 
|  | 869 | clk_enable(omap->utmi_p2_fck); | 
|  | 870 |  | 
|  | 871 | if (is_ehci_tll_mode(pdata->port_mode[0]) || | 
|  | 872 | (is_ohci_port(pdata->port_mode[0]))) | 
|  | 873 | reg |= OMAP4_P1_MODE_TLL; | 
|  | 874 | else if (is_ehci_hsic_mode(pdata->port_mode[0])) | 
|  | 875 | reg |= OMAP4_P1_MODE_HSIC; | 
|  | 876 |  | 
|  | 877 | if (is_ehci_tll_mode(pdata->port_mode[1]) || | 
|  | 878 | (is_ohci_port(pdata->port_mode[1]))) | 
|  | 879 | reg |= OMAP4_P2_MODE_TLL; | 
|  | 880 | else if (is_ehci_hsic_mode(pdata->port_mode[1])) | 
|  | 881 | reg |= OMAP4_P2_MODE_HSIC; | 
|  | 882 | } | 
|  | 883 |  | 
|  | 884 | usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); | 
|  | 885 | dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg); | 
|  | 886 |  | 
|  | 887 | if (is_ehci_tll_mode(pdata->port_mode[0]) || | 
|  | 888 | is_ehci_tll_mode(pdata->port_mode[1]) || | 
|  | 889 | is_ehci_tll_mode(pdata->port_mode[2]) || | 
|  | 890 | (is_ohci_port(pdata->port_mode[0])) || | 
|  | 891 | (is_ohci_port(pdata->port_mode[1])) || | 
|  | 892 | (is_ohci_port(pdata->port_mode[2]))) { | 
|  | 893 |  | 
|  | 894 | /* Enable UTMI mode for required TLL channels */ | 
|  | 895 | if (is_omap_usbhs_rev2(omap)) | 
|  | 896 | usbhs_omap_tll_init(dev, OMAP_REV2_TLL_CHANNEL_COUNT); | 
|  | 897 | else | 
|  | 898 | usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT); | 
|  | 899 | } | 
|  | 900 |  | 
|  | 901 | if (pdata->ehci_data->phy_reset) { | 
|  | 902 | /* Hold the PHY in RESET for enough time till | 
|  | 903 | * PHY is settled and ready | 
|  | 904 | */ | 
|  | 905 | udelay(10); | 
|  | 906 |  | 
|  | 907 | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) | 
|  | 908 | gpio_set_value | 
| Juergen Kilb | 557f447 | 2011-04-14 09:31:43 +0200 | [diff] [blame] | 909 | (pdata->ehci_data->reset_gpio_port[0], 1); | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 910 |  | 
|  | 911 | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) | 
|  | 912 | gpio_set_value | 
| Juergen Kilb | 557f447 | 2011-04-14 09:31:43 +0200 | [diff] [blame] | 913 | (pdata->ehci_data->reset_gpio_port[1], 1); | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 914 | } | 
|  | 915 |  | 
|  | 916 | end_count: | 
|  | 917 | omap->count++; | 
| Axel Lin | d11536e | 2011-04-21 19:52:41 +0530 | [diff] [blame] | 918 | spin_unlock_irqrestore(&omap->lock, flags); | 
|  | 919 | return 0; | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 920 |  | 
|  | 921 | err_tll: | 
|  | 922 | if (pdata->ehci_data->phy_reset) { | 
|  | 923 | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) | 
|  | 924 | gpio_free(pdata->ehci_data->reset_gpio_port[0]); | 
|  | 925 |  | 
|  | 926 | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) | 
|  | 927 | gpio_free(pdata->ehci_data->reset_gpio_port[1]); | 
|  | 928 | } | 
| Keshava Munegowda | 8f2df01 | 2011-06-20 15:22:56 +0200 | [diff] [blame] | 929 |  | 
|  | 930 | clk_disable(omap->usbtll_ick); | 
|  | 931 | clk_disable(omap->usbtll_fck); | 
|  | 932 | clk_disable(omap->usbhost_fs_fck); | 
|  | 933 | clk_disable(omap->usbhost_hs_fck); | 
|  | 934 | clk_disable(omap->usbhost_ick); | 
|  | 935 | spin_unlock_irqrestore(&omap->lock, flags); | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 936 | return ret; | 
|  | 937 | } | 
|  | 938 |  | 
|  | 939 | static void usbhs_disable(struct device *dev) | 
|  | 940 | { | 
|  | 941 | struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev); | 
|  | 942 | struct usbhs_omap_platform_data	*pdata = &omap->platdata; | 
|  | 943 | unsigned long			flags = 0; | 
|  | 944 | unsigned long			timeout; | 
|  | 945 |  | 
|  | 946 | dev_dbg(dev, "stopping TI HSUSB Controller\n"); | 
|  | 947 |  | 
|  | 948 | spin_lock_irqsave(&omap->lock, flags); | 
|  | 949 |  | 
|  | 950 | if (omap->count == 0) | 
|  | 951 | goto end_disble; | 
|  | 952 |  | 
|  | 953 | omap->count--; | 
|  | 954 |  | 
|  | 955 | if (omap->count != 0) | 
|  | 956 | goto end_disble; | 
|  | 957 |  | 
|  | 958 | /* Reset OMAP modules for insmod/rmmod to work */ | 
|  | 959 | usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, | 
|  | 960 | is_omap_usbhs_rev2(omap) ? | 
|  | 961 | OMAP4_UHH_SYSCONFIG_SOFTRESET : | 
|  | 962 | OMAP_UHH_SYSCONFIG_SOFTRESET); | 
|  | 963 |  | 
|  | 964 | timeout = jiffies + msecs_to_jiffies(100); | 
|  | 965 | while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS) | 
|  | 966 | & (1 << 0))) { | 
|  | 967 | cpu_relax(); | 
|  | 968 |  | 
|  | 969 | if (time_after(jiffies, timeout)) | 
|  | 970 | dev_dbg(dev, "operation timed out\n"); | 
|  | 971 | } | 
|  | 972 |  | 
|  | 973 | while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS) | 
|  | 974 | & (1 << 1))) { | 
|  | 975 | cpu_relax(); | 
|  | 976 |  | 
|  | 977 | if (time_after(jiffies, timeout)) | 
|  | 978 | dev_dbg(dev, "operation timed out\n"); | 
|  | 979 | } | 
|  | 980 |  | 
|  | 981 | while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS) | 
|  | 982 | & (1 << 2))) { | 
|  | 983 | cpu_relax(); | 
|  | 984 |  | 
|  | 985 | if (time_after(jiffies, timeout)) | 
|  | 986 | dev_dbg(dev, "operation timed out\n"); | 
|  | 987 | } | 
|  | 988 |  | 
|  | 989 | usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1)); | 
|  | 990 |  | 
|  | 991 | while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS) | 
|  | 992 | & (1 << 0))) { | 
|  | 993 | cpu_relax(); | 
|  | 994 |  | 
|  | 995 | if (time_after(jiffies, timeout)) | 
|  | 996 | dev_dbg(dev, "operation timed out\n"); | 
|  | 997 | } | 
|  | 998 |  | 
| Keshava Munegowda | 6eb6fbb | 2011-05-16 14:24:58 +0530 | [diff] [blame] | 999 | if (is_omap_usbhs_rev2(omap)) { | 
|  | 1000 | if (is_ehci_tll_mode(pdata->port_mode[0])) | 
| Keshava Munegowda | e2e49d5 | 2011-07-22 18:39:30 +0530 | [diff] [blame] | 1001 | clk_disable(omap->usbtll_p1_fck); | 
| Keshava Munegowda | 6eb6fbb | 2011-05-16 14:24:58 +0530 | [diff] [blame] | 1002 | if (is_ehci_tll_mode(pdata->port_mode[1])) | 
| Keshava Munegowda | e2e49d5 | 2011-07-22 18:39:30 +0530 | [diff] [blame] | 1003 | clk_disable(omap->usbtll_p2_fck); | 
| Keshava Munegowda | 6eb6fbb | 2011-05-16 14:24:58 +0530 | [diff] [blame] | 1004 | clk_disable(omap->utmi_p2_fck); | 
|  | 1005 | clk_disable(omap->utmi_p1_fck); | 
|  | 1006 | } | 
|  | 1007 |  | 
| Keshava Munegowda | 8f2df01 | 2011-06-20 15:22:56 +0200 | [diff] [blame] | 1008 | clk_disable(omap->usbtll_ick); | 
|  | 1009 | clk_disable(omap->usbtll_fck); | 
|  | 1010 | clk_disable(omap->usbhost_fs_fck); | 
|  | 1011 | clk_disable(omap->usbhost_hs_fck); | 
|  | 1012 | clk_disable(omap->usbhost_ick); | 
| Keshava Munegowda | 6eb6fbb | 2011-05-16 14:24:58 +0530 | [diff] [blame] | 1013 |  | 
|  | 1014 | /* The gpio_free migh sleep; so unlock the spinlock */ | 
|  | 1015 | spin_unlock_irqrestore(&omap->lock, flags); | 
|  | 1016 |  | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 1017 | if (pdata->ehci_data->phy_reset) { | 
|  | 1018 | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) | 
|  | 1019 | gpio_free(pdata->ehci_data->reset_gpio_port[0]); | 
|  | 1020 |  | 
|  | 1021 | if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) | 
|  | 1022 | gpio_free(pdata->ehci_data->reset_gpio_port[1]); | 
|  | 1023 | } | 
| Keshava Munegowda | 6eb6fbb | 2011-05-16 14:24:58 +0530 | [diff] [blame] | 1024 | return; | 
| Keshava Munegowda | 17cdd29 | 2011-03-01 20:08:17 +0530 | [diff] [blame] | 1025 |  | 
|  | 1026 | end_disble: | 
|  | 1027 | spin_unlock_irqrestore(&omap->lock, flags); | 
|  | 1028 | } | 
|  | 1029 |  | 
|  | 1030 | int omap_usbhs_enable(struct device *dev) | 
|  | 1031 | { | 
|  | 1032 | return  usbhs_enable(dev->parent); | 
|  | 1033 | } | 
|  | 1034 | EXPORT_SYMBOL_GPL(omap_usbhs_enable); | 
|  | 1035 |  | 
|  | 1036 | void omap_usbhs_disable(struct device *dev) | 
|  | 1037 | { | 
|  | 1038 | usbhs_disable(dev->parent); | 
|  | 1039 | } | 
|  | 1040 | EXPORT_SYMBOL_GPL(omap_usbhs_disable); | 
|  | 1041 |  | 
|  | 1042 | static struct platform_driver usbhs_omap_driver = { | 
|  | 1043 | .driver = { | 
|  | 1044 | .name		= (char *)usbhs_driver_name, | 
|  | 1045 | .owner		= THIS_MODULE, | 
|  | 1046 | }, | 
|  | 1047 | .remove		= __exit_p(usbhs_omap_remove), | 
|  | 1048 | }; | 
|  | 1049 |  | 
|  | 1050 | MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>"); | 
|  | 1051 | MODULE_ALIAS("platform:" USBHS_DRIVER_NAME); | 
|  | 1052 | MODULE_LICENSE("GPL v2"); | 
|  | 1053 | MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI"); | 
|  | 1054 |  | 
|  | 1055 | static int __init omap_usbhs_drvinit(void) | 
|  | 1056 | { | 
|  | 1057 | return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe); | 
|  | 1058 | } | 
|  | 1059 |  | 
|  | 1060 | /* | 
|  | 1061 | * init before ehci and ohci drivers; | 
|  | 1062 | * The usbhs core driver should be initialized much before | 
|  | 1063 | * the omap ehci and ohci probe functions are called. | 
|  | 1064 | */ | 
|  | 1065 | fs_initcall(omap_usbhs_drvinit); | 
|  | 1066 |  | 
|  | 1067 | static void __exit omap_usbhs_drvexit(void) | 
|  | 1068 | { | 
|  | 1069 | platform_driver_unregister(&usbhs_omap_driver); | 
|  | 1070 | } | 
|  | 1071 | module_exit(omap_usbhs_drvexit); |