arch/blackfin/kernel/traps.c

/*
 * Copyright 2004-2009 Analog Devices Inc.
 *
 * Licensed under the GPL-2 or later
 */

#include <linux/bug.h>
#include <linux/uaccess.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/kallsyms.h>
#include <linux/fs.h>
#include <linux/rbtree.h>
#include <asm/traps.h>
#include <asm/cacheflush.h>
#include <asm/cplb.h>
#include <asm/dma.h>
#include <asm/blackfin.h>
#include <asm/irq_handler.h>
#include <linux/irq.h>
#include <asm/trace.h>
#include <asm/fixed_code.h>

#ifdef CONFIG_KGDB
# include <linux/kgdb.h>

# define CHK_DEBUGGER_TRAP() \
	do { \
		kgdb_handle_exception(trapnr, sig, info.si_code, fp); \
	} while (0)
# define CHK_DEBUGGER_TRAP_MAYBE() \
	do { \
		if (kgdb_connected) \
			CHK_DEBUGGER_TRAP(); \
	} while (0)
#else
# define CHK_DEBUGGER_TRAP() do { } while (0)
# define CHK_DEBUGGER_TRAP_MAYBE() do { } while (0)
#endif


#ifdef CONFIG_DEBUG_VERBOSE
#define verbose_printk(fmt, arg...) \
	printk(fmt, ##arg)
#else
#define verbose_printk(fmt, arg...) \
	({ if (0) printk(fmt, ##arg); 0; })
#endif

#if defined(CONFIG_DEBUG_MMRS) || defined(CONFIG_DEBUG_MMRS_MODULE)
u32 last_seqstat;
#ifdef CONFIG_DEBUG_MMRS_MODULE
EXPORT_SYMBOL(last_seqstat);
#endif
#endif

/* Initiate the event table handler */
void __init trap_init(void)
{
	CSYNC();
	bfin_write_EVT3(trap);
	CSYNC();
}

static void decode_address(char *buf, unsigned long address)
{
#ifdef CONFIG_DEBUG_VERBOSE
	struct task_struct *p;
	struct mm_struct *mm;
	unsigned long flags, offset;
	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
	struct rb_node *n;

#ifdef CONFIG_KALLSYMS
	unsigned long symsize;
	const char *symname;
	char *modname;
	char *delim = ":";
	char namebuf[128];
#endif

	buf += sprintf(buf, "<0x%08lx> ", address);

#ifdef CONFIG_KALLSYMS
	/* look up the address and see if we are in kernel space */
	symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf);

	if (symname) {
		/* yeah! kernel space! */
		if (!modname)
			modname = delim = "";
		sprintf(buf, "{ %s%s%s%s + 0x%lx }",
		        delim, modname, delim, symname,
		        (unsigned long)offset);
		return;
	}
#endif

	if (address >= FIXED_CODE_START && address < FIXED_CODE_END) {
		/* Problem in fixed code section? */
		strcat(buf, "/* Maybe fixed code section */");
		return;

	} else if (address < CONFIG_BOOT_LOAD) {
		/* Problem somewhere before the kernel start address */
		strcat(buf, "/* Maybe null pointer? */");
		return;

	} else if (address >= COREMMR_BASE) {
		strcat(buf, "/* core mmrs */");
		return;

	} else if (address >= SYSMMR_BASE) {
		strcat(buf, "/* system mmrs */");
		return;

	} else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) {
		strcat(buf, "/* on-chip L1 ROM */");
		return;
	}

	/*
	 * Don't walk any of the vmas if we are oopsing, it has been known
	 * to cause problems - corrupt vmas (kernel crashes) cause double faults
	 */
	if (oops_in_progress) {
		strcat(buf, "/* kernel dynamic memory (maybe user-space) */");
		return;
	}

	/* looks like we're off in user-land, so let's walk all the
	 * mappings of all our processes and see if we can't be a whee
	 * bit more specific
	 */
	write_lock_irqsave(&tasklist_lock, flags);
	for_each_process(p) {
		mm = (in_atomic ? p->mm : get_task_mm(p));
		if (!mm)
			continue;

		for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) {
			struct vm_area_struct *vma;

			vma = rb_entry(n, struct vm_area_struct, vm_rb);

			if (address >= vma->vm_start && address < vma->vm_end) {
				char _tmpbuf[256];
				char *name = p->comm;
				struct file *file = vma->vm_file;

				if (file) {
					char *d_name = d_path(&file->f_path, _tmpbuf,
						      sizeof(_tmpbuf));
					if (!IS_ERR(d_name))
						name = d_name;
				}

				/* FLAT does not have its text aligned to the start of
				 * the map while FDPIC ELF does ...
				 */

				/* before we can check flat/fdpic, we need to
				 * make sure current is valid
				 */
				if ((unsigned long)current >= FIXED_CODE_START &&
				    !((unsigned long)current & 0x3)) {
					if (current->mm &&
					    (address > current->mm->start_code) &&
					    (address < current->mm->end_code))
						offset = address - current->mm->start_code;
					else
						offset = (address - vma->vm_start) +
							 (vma->vm_pgoff << PAGE_SHIFT);

					sprintf(buf, "[ %s + 0x%lx ]", name, offset);
				} else
					sprintf(buf, "[ %s vma:0x%lx-0x%lx]",
						name, vma->vm_start, vma->vm_end);

				if (!in_atomic)
					mmput(mm);

				if (buf[0] == '\0')
					sprintf(buf, "[ %s ] dynamic memory", name);

				goto done;
			}
		}
		if (!in_atomic)
			mmput(mm);
	}

	/* we were unable to find this address anywhere */
	sprintf(buf, "/* kernel dynamic memory */");

done:
	write_unlock_irqrestore(&tasklist_lock, flags);
#else
	sprintf(buf, " ");
#endif
}

asmlinkage void double_fault_c(struct pt_regs *fp)
{
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
	int j;
	trace_buffer_save(j);
#endif

	console_verbose();
	oops_in_progress = 1;
#ifdef CONFIG_DEBUG_VERBOSE
	printk(KERN_EMERG "Double Fault\n");
#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
		unsigned int cpu = raw_smp_processor_id();
		char buf[150];
		decode_address(buf, cpu_pda[cpu].retx_doublefault);
		printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
			(unsigned int)cpu_pda[cpu].seqstat_doublefault & SEQSTAT_EXCAUSE, buf);
		decode_address(buf, cpu_pda[cpu].dcplb_doublefault_addr);
		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %s\n", buf);
		decode_address(buf, cpu_pda[cpu].icplb_doublefault_addr);
		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %s\n", buf);

		decode_address(buf, fp->retx);
		printk(KERN_NOTICE "The instruction at %s caused a double exception\n", buf);
	} else
#endif
	{
		dump_bfin_process(fp);
		dump_bfin_mem(fp);
		show_regs(fp);
		dump_bfin_trace_buffer();
	}
#endif
	panic("Double Fault - unrecoverable event");

}

static int kernel_mode_regs(struct pt_regs *regs)
{
	return regs->ipend & 0xffc0;
}

asmlinkage notrace void trap_c(struct pt_regs *fp)
{
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
	int j;
#endif
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
	unsigned int cpu = raw_smp_processor_id();
#endif
	const char *strerror = NULL;
	int sig = 0;
	siginfo_t info;
	unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE;

	trace_buffer_save(j);
#if defined(CONFIG_DEBUG_MMRS) || defined(CONFIG_DEBUG_MMRS_MODULE)
	last_seqstat = (u32)fp->seqstat;
#endif

	/* Important - be very careful dereferncing pointers - will lead to
	 * double faults if the stack has become corrupt
	 */

	/* trap_c() will be called for exceptions. During exceptions
	 * processing, the pc value should be set with retx value.
	 * With this change we can cleanup some code in signal.c- TODO
	 */
	fp->orig_pc = fp->retx;
	/* printk("exception: 0x%x, ipend=%x, reti=%x, retx=%x\n",
		trapnr, fp->ipend, fp->pc, fp->retx); */

	/* send the appropriate signal to the user program */
	switch (trapnr) {

	/* This table works in conjuction with the one in ./mach-common/entry.S
	 * Some exceptions are handled there (in assembly, in exception space)
	 * Some are handled here, (in C, in interrupt space)
	 * Some, like CPLB, are handled in both, where the normal path is
	 * handled in assembly/exception space, and the error path is handled
	 * here
	 */

	/* 0x00 - Linux Syscall, getting here is an error */
	/* 0x01 - userspace gdb breakpoint, handled here */
	case VEC_EXCPT01:
		info.si_code = TRAP_ILLTRAP;
		sig = SIGTRAP;
		CHK_DEBUGGER_TRAP_MAYBE();
		/* Check if this is a breakpoint in kernel space */
		if (kernel_mode_regs(fp))
			goto traps_done;
		else
			break;
	/* 0x03 - User Defined, userspace stack overflow */
	case VEC_EXCPT03:
		info.si_code = SEGV_STACKFLOW;
		sig = SIGSEGV;
		strerror = KERN_NOTICE EXC_0x03(KERN_NOTICE);
		CHK_DEBUGGER_TRAP_MAYBE();
		break;
	/* 0x02 - KGDB initial connection and break signal trap */
	case VEC_EXCPT02:
#ifdef CONFIG_KGDB
		info.si_code = TRAP_ILLTRAP;
		sig = SIGTRAP;
		CHK_DEBUGGER_TRAP();
		goto traps_done;
#endif
	/* 0x04 - User Defined */
	/* 0x05 - User Defined */
	/* 0x06 - User Defined */
	/* 0x07 - User Defined */
	/* 0x08 - User Defined */
	/* 0x09 - User Defined */
	/* 0x0A - User Defined */
	/* 0x0B - User Defined */
	/* 0x0C - User Defined */
	/* 0x0D - User Defined */
	/* 0x0E - User Defined */
	/* 0x0F - User Defined */
	/* If we got here, it is most likely that someone was trying to use a
	 * custom exception handler, and it is not actually installed properly
	 */
	case VEC_EXCPT04 ... VEC_EXCPT15:
		info.si_code = ILL_ILLPARAOP;
		sig = SIGILL;
		strerror = KERN_NOTICE EXC_0x04(KERN_NOTICE);
		CHK_DEBUGGER_TRAP_MAYBE();
		break;
	/* 0x10 HW Single step, handled here */
	case VEC_STEP:
		info.si_code = TRAP_STEP;
		sig = SIGTRAP;
		CHK_DEBUGGER_TRAP_MAYBE();
		/* Check if this is a single step in kernel space */
		if (kernel_mode_regs(fp))
			goto traps_done;
		else
			break;
	/* 0x11 - Trace Buffer Full, handled here */
	case VEC_OVFLOW:
		info.si_code = TRAP_TRACEFLOW;
		sig = SIGTRAP;
		strerror = KERN_NOTICE EXC_0x11(KERN_NOTICE);
		CHK_DEBUGGER_TRAP_MAYBE();
		break;
	/* 0x12 - Reserved, Caught by default */
	/* 0x13 - Reserved, Caught by default */
	/* 0x14 - Reserved, Caught by default */
	/* 0x15 - Reserved, Caught by default */
	/* 0x16 - Reserved, Caught by default */
	/* 0x17 - Reserved, Caught by default */
	/* 0x18 - Reserved, Caught by default */
	/* 0x19 - Reserved, Caught by default */
	/* 0x1A - Reserved, Caught by default */
	/* 0x1B - Reserved, Caught by default */
	/* 0x1C - Reserved, Caught by default */
	/* 0x1D - Reserved, Caught by default */
	/* 0x1E - Reserved, Caught by default */
	/* 0x1F - Reserved, Caught by default */
	/* 0x20 - Reserved, Caught by default */
	/* 0x21 - Undefined Instruction, handled here */
	case VEC_UNDEF_I:
#ifdef CONFIG_BUG
		if (kernel_mode_regs(fp)) {
			switch (report_bug(fp->pc, fp)) {
			case BUG_TRAP_TYPE_NONE:
				break;
			case BUG_TRAP_TYPE_WARN:
				dump_bfin_trace_buffer();
				fp->pc += 2;
				goto traps_done;
			case BUG_TRAP_TYPE_BUG:
				/* call to panic() will dump trace, and it is
				 * off at this point, so it won't be clobbered
				 */
				panic("BUG()");
			}
		}
#endif
		info.si_code = ILL_ILLOPC;
		sig = SIGILL;
		strerror = KERN_NOTICE EXC_0x21(KERN_NOTICE);
		CHK_DEBUGGER_TRAP_MAYBE();
		break;
	/* 0x22 - Illegal Instruction Combination, handled here */
	case VEC_ILGAL_I:
		info.si_code = ILL_ILLPARAOP;
		sig = SIGILL;
		strerror = KERN_NOTICE EXC_0x22(KERN_NOTICE);
		CHK_DEBUGGER_TRAP_MAYBE();
		break;
	/* 0x23 - Data CPLB protection violation, handled here */
	case VEC_CPLB_VL:
		info.si_code = ILL_CPLB_VI;
		sig = SIGSEGV;
		strerror = KERN_NOTICE EXC_0x23(KERN_NOTICE);
		CHK_DEBUGGER_TRAP_MAYBE();
		break;
	/* 0x24 - Data access misaligned, handled here */
	case VEC_MISALI_D:
		info.si_code = BUS_ADRALN;
		sig = SIGBUS;
		strerror = KERN_NOTICE EXC_0x24(KERN_NOTICE);
		CHK_DEBUGGER_TRAP_MAYBE();
		break;
	/* 0x25 - Unrecoverable Event, handled here */
	case VEC_UNCOV:
		info.si_code = ILL_ILLEXCPT;
		sig = SIGILL;
		strerror = KERN_NOTICE EXC_0x25(KERN_NOTICE);
		CHK_DEBUGGER_TRAP_MAYBE();
		break;
	/* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr,
		error case is handled here */
	case VEC_CPLB_M:
		info.si_code = BUS_ADRALN;
		sig = SIGBUS;
		strerror = KERN_NOTICE EXC_0x26(KERN_NOTICE);
		break;
	/* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
	case VEC_CPLB_MHIT:
		info.si_code = ILL_CPLB_MULHIT;
		sig = SIGSEGV;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
		if (cpu_pda[cpu].dcplb_fault_addr < FIXED_CODE_START)
			strerror = KERN_NOTICE "NULL pointer access\n";
		else
#endif
			strerror = KERN_NOTICE EXC_0x27(KERN_NOTICE);
		CHK_DEBUGGER_TRAP_MAYBE();
		break;
	/* 0x28 - Emulation Watchpoint, handled here */
	case VEC_WATCH:
		info.si_code = TRAP_WATCHPT;
		sig = SIGTRAP;
		pr_debug(EXC_0x28(KERN_DEBUG));
		CHK_DEBUGGER_TRAP_MAYBE();
		/* Check if this is a watchpoint in kernel space */
		if (kernel_mode_regs(fp))
			goto traps_done;
		else
			break;
#ifdef CONFIG_BF535
	/* 0x29 - Instruction fetch access error (535 only) */
	case VEC_ISTRU_VL:      /* ADSP-BF535 only (MH) */
		info.si_code = BUS_OPFETCH;
		sig = SIGBUS;
		strerror = KERN_NOTICE "BF535: VEC_ISTRU_VL\n";
		CHK_DEBUGGER_TRAP_MAYBE();
		break;
#else
	/* 0x29 - Reserved, Caught by default */
#endif
	/* 0x2A - Instruction fetch misaligned, handled here */
	case VEC_MISALI_I:
		info.si_code = BUS_ADRALN;
		sig = SIGBUS;
		strerror = KERN_NOTICE EXC_0x2A(KERN_NOTICE);
		CHK_DEBUGGER_TRAP_MAYBE();
		break;
	/* 0x2B - Instruction CPLB protection violation, handled here */
	case VEC_CPLB_I_VL:
		info.si_code = ILL_CPLB_VI;
		sig = SIGBUS;
		strerror = KERN_NOTICE EXC_0x2B(KERN_NOTICE);
		CHK_DEBUGGER_TRAP_MAYBE();
		break;
	/* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */
	case VEC_CPLB_I_M:
		info.si_code = ILL_CPLB_MISS;
		sig = SIGBUS;
		strerror = KERN_NOTICE EXC_0x2C(KERN_NOTICE);
		break;
	/* 0x2D - Instruction CPLB Multiple Hits, handled here */
	case VEC_CPLB_I_MHIT:
		info.si_code = ILL_CPLB_MULHIT;
		sig = SIGSEGV;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
		if (cpu_pda[cpu].icplb_fault_addr < FIXED_CODE_START)
			strerror = KERN_NOTICE "Jump to NULL address\n";
		else
#endif
			strerror = KERN_NOTICE EXC_0x2D(KERN_NOTICE);
		CHK_DEBUGGER_TRAP_MAYBE();
		break;
	/* 0x2E - Illegal use of Supervisor Resource, handled here */
	case VEC_ILL_RES:
		info.si_code = ILL_PRVOPC;
		sig = SIGILL;
		strerror = KERN_NOTICE EXC_0x2E(KERN_NOTICE);
		CHK_DEBUGGER_TRAP_MAYBE();
		break;
	/* 0x2F - Reserved, Caught by default */
	/* 0x30 - Reserved, Caught by default */
	/* 0x31 - Reserved, Caught by default */
	/* 0x32 - Reserved, Caught by default */
	/* 0x33 - Reserved, Caught by default */
	/* 0x34 - Reserved, Caught by default */
	/* 0x35 - Reserved, Caught by default */
	/* 0x36 - Reserved, Caught by default */
	/* 0x37 - Reserved, Caught by default */
	/* 0x38 - Reserved, Caught by default */
	/* 0x39 - Reserved, Caught by default */
	/* 0x3A - Reserved, Caught by default */
	/* 0x3B - Reserved, Caught by default */
	/* 0x3C - Reserved, Caught by default */
	/* 0x3D - Reserved, Caught by default */
	/* 0x3E - Reserved, Caught by default */
	/* 0x3F - Reserved, Caught by default */
	case VEC_HWERR:
		info.si_code = BUS_ADRALN;
		sig = SIGBUS;
		switch (fp->seqstat & SEQSTAT_HWERRCAUSE) {
		/* System MMR Error */
		case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR):
			info.si_code = BUS_ADRALN;
			sig = SIGBUS;
			strerror = KERN_NOTICE HWC_x2(KERN_NOTICE);
			break;
		/* External Memory Addressing Error */
		case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR):
			if (ANOMALY_05000310) {
				static unsigned long anomaly_rets;

				if ((fp->pc >= (L1_CODE_START + L1_CODE_LENGTH - 512)) &&
				    (fp->pc < (L1_CODE_START + L1_CODE_LENGTH))) {
					/*
					 * A false hardware error will happen while fetching at
					 * the L1 instruction SRAM boundary.  Ignore it.
					 */
					anomaly_rets = fp->rets;
					goto traps_done;
				} else if (fp->rets == anomaly_rets) {
					/*
					 * While boundary code returns to a function, at the ret
					 * point, a new false hardware error might occur too based
					 * on tests.  Ignore it too.
					 */
					goto traps_done;
				} else if ((fp->rets >= (L1_CODE_START + L1_CODE_LENGTH - 512)) &&
				           (fp->rets < (L1_CODE_START + L1_CODE_LENGTH))) {
					/*
					 * If boundary code calls a function, at the entry point,
					 * a new false hardware error maybe happen based on tests.
					 * Ignore it too.
					 */
					goto traps_done;
				} else
					anomaly_rets = 0;
			}

			info.si_code = BUS_ADRERR;
			sig = SIGBUS;
			strerror = KERN_NOTICE HWC_x3(KERN_NOTICE);
			break;
		/* Performance Monitor Overflow */
		case (SEQSTAT_HWERRCAUSE_PERF_FLOW):
			strerror = KERN_NOTICE HWC_x12(KERN_NOTICE);
			break;
		/* RAISE 5 instruction */
		case (SEQSTAT_HWERRCAUSE_RAISE_5):
			printk(KERN_NOTICE HWC_x18(KERN_NOTICE));
			break;
		default:        /* Reserved */
			printk(KERN_NOTICE HWC_default(KERN_NOTICE));
			break;
		}
		CHK_DEBUGGER_TRAP_MAYBE();
		break;
	/*
	 * We should be handling all known exception types above,
	 * if we get here we hit a reserved one, so panic
	 */
	default:
		info.si_code = ILL_ILLPARAOP;
		sig = SIGILL;
		verbose_printk(KERN_EMERG "Caught Unhandled Exception, code = %08lx\n",
			(fp->seqstat & SEQSTAT_EXCAUSE));
		CHK_DEBUGGER_TRAP_MAYBE();
		break;
	}

	BUG_ON(sig == 0);

	/* If the fault was caused by a kernel thread, or interrupt handler
	 * we will kernel panic, so the system reboots.
	 */
	if (kernel_mode_regs(fp) || (current && !current->mm)) {
		console_verbose();
		oops_in_progress = 1;
	}

	if (sig != SIGTRAP) {
		if (strerror)
			verbose_printk(strerror);

		dump_bfin_process(fp);
		dump_bfin_mem(fp);
		show_regs(fp);

		/* Print out the trace buffer if it makes sense */
#ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
		if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M)
			verbose_printk(KERN_NOTICE "No trace since you do not have "
			       "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n\n");
		else
#endif
			dump_bfin_trace_buffer();

		if (oops_in_progress) {
			/* Dump the current kernel stack */
			verbose_printk(KERN_NOTICE "Kernel Stack\n");
			show_stack(current, NULL);
			print_modules();
#ifndef CONFIG_ACCESS_CHECK
			verbose_printk(KERN_EMERG "Please turn on "
			       "CONFIG_ACCESS_CHECK\n");
#endif
			panic("Kernel exception");
		} else {
#ifdef CONFIG_DEBUG_VERBOSE
			unsigned long *stack;
			/* Dump the user space stack */
			stack = (unsigned long *)rdusp();
			verbose_printk(KERN_NOTICE "Userspace Stack\n");
			show_stack(NULL, stack);
#endif
		}
	}

#ifdef CONFIG_IPIPE
	if (!ipipe_trap_notify(fp->seqstat & 0x3f, fp))
#endif
	{
		info.si_signo = sig;
		info.si_errno = 0;
		info.si_addr = (void __user *)fp->pc;
		force_sig_info(sig, &info, current);
	}

	if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) ||
	    (ANOMALY_05000281 && trapnr == VEC_HWERR) ||
	    (ANOMALY_05000189 && (trapnr == VEC_CPLB_I_VL || trapnr == VEC_CPLB_VL)))
		fp->pc = SAFE_USER_INSTRUCTION;

 traps_done:
	trace_buffer_restore(j);
}

/* Typical exception handling routines	*/

#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)

/*
 * Similar to get_user, do some address checking, then dereference
 * Return true on success, false on bad address
 */
static bool get_instruction(unsigned short *val, unsigned short *address)
{
	unsigned long addr = (unsigned long)address;

	/* Check for odd addresses */
	if (addr & 0x1)
		return false;

	/* MMR region will never have instructions */
	if (addr >= SYSMMR_BASE)
		return false;

	switch (bfin_mem_access_type(addr, 2)) {
		case BFIN_MEM_ACCESS_CORE:
		case BFIN_MEM_ACCESS_CORE_ONLY:
			*val = *address;
			return true;
		case BFIN_MEM_ACCESS_DMA:
			dma_memcpy(val, address, 2);
			return true;
		case BFIN_MEM_ACCESS_ITEST:
			isram_memcpy(val, address, 2);
			return true;
		default: /* invalid access */
			return false;
	}
}

/*
 * decode the instruction if we are printing out the trace, as it
 * makes things easier to follow, without running it through objdump
 * These are the normal instructions which cause change of flow, which
 * would be at the source of the trace buffer
 */
#if defined(CONFIG_DEBUG_VERBOSE) && defined(CONFIG_DEBUG_BFIN_HWTRACE_ON)
static void decode_instruction(unsigned short *address)
{
	unsigned short opcode;

	if (get_instruction(&opcode, address)) {
		if (opcode == 0x0010)
			verbose_printk("RTS");
		else if (opcode == 0x0011)
			verbose_printk("RTI");
		else if (opcode == 0x0012)
			verbose_printk("RTX");
		else if (opcode == 0x0013)
			verbose_printk("RTN");
		else if (opcode == 0x0014)
			verbose_printk("RTE");
		else if (opcode == 0x0025)
			verbose_printk("EMUEXCPT");
		else if (opcode == 0x0040 && opcode <= 0x0047)
			verbose_printk("STI R%i", opcode & 7);
		else if (opcode >= 0x0050 && opcode <= 0x0057)
			verbose_printk("JUMP (P%i)", opcode & 7);
		else if (opcode >= 0x0060 && opcode <= 0x0067)
			verbose_printk("CALL (P%i)", opcode & 7);
		else if (opcode >= 0x0070 && opcode <= 0x0077)
			verbose_printk("CALL (PC+P%i)", opcode & 7);
		else if (opcode >= 0x0080 && opcode <= 0x0087)
			verbose_printk("JUMP (PC+P%i)", opcode & 7);
		else if (opcode >= 0x0090 && opcode <= 0x009F)
			verbose_printk("RAISE 0x%x", opcode & 0xF);
		else if (opcode >= 0x00A0 && opcode <= 0x00AF)
			verbose_printk("EXCPT 0x%x", opcode & 0xF);
		else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
			verbose_printk("IF !CC JUMP");
		else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
			verbose_printk("IF CC JUMP");
		else if (opcode >= 0x2000 && opcode <= 0x2fff)
			verbose_printk("JUMP.S");
		else if (opcode >= 0xe080 && opcode <= 0xe0ff)
			verbose_printk("LSETUP");
		else if (opcode >= 0xe200 && opcode <= 0xe2ff)
			verbose_printk("JUMP.L");
		else if (opcode >= 0xe300 && opcode <= 0xe3ff)
			verbose_printk("CALL pcrel");
		else
			verbose_printk("0x%04x", opcode);
	}

}
#endif

void dump_bfin_trace_buffer(void)
{
#ifdef CONFIG_DEBUG_VERBOSE
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
	int tflags, i = 0;
	char buf[150];
	unsigned short *addr;
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
	int j, index;
#endif

	trace_buffer_save(tflags);

	printk(KERN_NOTICE "Hardware Trace:\n");

#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
	printk(KERN_NOTICE "WARNING: Expanded trace turned on - can not trace exceptions\n");
#endif

	if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
		for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
			decode_address(buf, (unsigned long)bfin_read_TBUF());
			printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
			addr = (unsigned short *)bfin_read_TBUF();
			decode_address(buf, (unsigned long)addr);
			printk(KERN_NOTICE "     Source : %s ", buf);
			decode_instruction(addr);
			printk("\n");
		}
	}

#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
	if (trace_buff_offset)
		index = trace_buff_offset / 4;
	else
		index = EXPAND_LEN;

	j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
	while (j) {
		decode_address(buf, software_trace_buff[index]);
		printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
		index -= 1;
		if (index < 0 )
			index = EXPAND_LEN;
		decode_address(buf, software_trace_buff[index]);
		printk(KERN_NOTICE "     Source : %s ", buf);
		decode_instruction((unsigned short *)software_trace_buff[index]);
		printk("\n");
		index -= 1;
		if (index < 0)
			index = EXPAND_LEN;
		j--;
		i++;
	}
#endif

	trace_buffer_restore(tflags);
#endif
#endif
}
EXPORT_SYMBOL(dump_bfin_trace_buffer);

#ifdef CONFIG_BUG
int is_valid_bugaddr(unsigned long addr)
{
	unsigned short opcode;

	if (!get_instruction(&opcode, (unsigned short *)addr))
		return 0;

	return opcode == BFIN_BUG_OPCODE;
}
#endif

/*
 * Checks to see if the address pointed to is either a
 * 16-bit CALL instruction, or a 32-bit CALL instruction
 */
static bool is_bfin_call(unsigned short *addr)
{
	unsigned short opcode = 0, *ins_addr;
	ins_addr = (unsigned short *)addr;

	if (!get_instruction(&opcode, ins_addr))
		return false;

	if ((opcode >= 0x0060 && opcode <= 0x0067) ||
	    (opcode >= 0x0070 && opcode <= 0x0077))
		return true;

	ins_addr--;
	if (!get_instruction(&opcode, ins_addr))
		return false;

	if (opcode >= 0xE300 && opcode <= 0xE3FF)
		return true;

	return false;

}

void show_stack(struct task_struct *task, unsigned long *stack)
{
#ifdef CONFIG_PRINTK
	unsigned int *addr, *endstack, *fp = 0, *frame;
	unsigned short *ins_addr;
	char buf[150];
	unsigned int i, j, ret_addr, frame_no = 0;

	/*
	 * If we have been passed a specific stack, use that one otherwise
	 *    if we have been passed a task structure, use that, otherwise
	 *    use the stack of where the variable "stack" exists
	 */

	if (stack == NULL) {
		if (task) {
			/* We know this is a kernel stack, so this is the start/end */
			stack = (unsigned long *)task->thread.ksp;
			endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE);
		} else {
			/* print out the existing stack info */
			stack = (unsigned long *)&stack;
			endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
		}
	} else
		endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);

	printk(KERN_NOTICE "Stack info:\n");
	decode_address(buf, (unsigned int)stack);
	printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);

	if (!access_ok(VERIFY_READ, stack, (unsigned int)endstack - (unsigned int)stack)) {
		printk(KERN_NOTICE "Invalid stack pointer\n");
		return;
	}

	/* First thing is to look for a frame pointer */
	for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
		if (*addr & 0x1)
			continue;
		ins_addr = (unsigned short *)*addr;
		ins_addr--;
		if (is_bfin_call(ins_addr))
			fp = addr - 1;

		if (fp) {
			/* Let's check to see if it is a frame pointer */
			while (fp >= (addr - 1) && fp < endstack
			       && fp && ((unsigned int) fp & 0x3) == 0)
				fp = (unsigned int *)*fp;
			if (fp == 0 || fp == endstack) {
				fp = addr - 1;
				break;
			}
			fp = 0;
		}
	}
	if (fp) {
		frame = fp;
		printk(KERN_NOTICE " FP: (0x%p)\n", fp);
	} else
		frame = 0;

	/*
	 * Now that we think we know where things are, we
	 * walk the stack again, this time printing things out
	 * incase there is no frame pointer, we still look for
	 * valid return addresses
	 */

	/* First time print out data, next time, print out symbols */
	for (j = 0; j <= 1; j++) {
		if (j)
			printk(KERN_NOTICE "Return addresses in stack:\n");
		else
			printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack);

		fp = frame;
		frame_no = 0;

		for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
		     addr < endstack; addr++, i++) {

			ret_addr = 0;
			if (!j && i % 8 == 0)
				printk(KERN_NOTICE "%p:",addr);

			/* if it is an odd address, or zero, just skip it */
			if (*addr & 0x1 || !*addr)
				goto print;

			ins_addr = (unsigned short *)*addr;

			/* Go back one instruction, and see if it is a CALL */
			ins_addr--;
			ret_addr = is_bfin_call(ins_addr);
 print:
			if (!j && stack == (unsigned long *)addr)
				printk("[%08x]", *addr);
			else if (ret_addr)
				if (j) {
					decode_address(buf, (unsigned int)*addr);
					if (frame == addr) {
						printk(KERN_NOTICE "   frame %2i : %s\n", frame_no, buf);
						continue;
					}
					printk(KERN_NOTICE "    address : %s\n", buf);
				} else
					printk("<%08x>", *addr);
			else if (fp == addr) {
				if (j)
					frame = addr+1;
				else
					printk("(%08x)", *addr);

				fp = (unsigned int *)*addr;
				frame_no++;

			} else if (!j)
				printk(" %08x ", *addr);
		}
		if (!j)
			printk("\n");
	}
#endif
}
EXPORT_SYMBOL(show_stack);

void dump_stack(void)
{
	unsigned long stack;
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
	int tflags;
#endif
	trace_buffer_save(tflags);
	dump_bfin_trace_buffer();
	show_stack(current, &stack);
	trace_buffer_restore(tflags);
}
EXPORT_SYMBOL(dump_stack);

void dump_bfin_process(struct pt_regs *fp)
{
#ifdef CONFIG_DEBUG_VERBOSE
	/* We should be able to look at fp->ipend, but we don't push it on the
	 * stack all the time, so do this until we fix that */
	unsigned int context = bfin_read_IPEND();

	if (oops_in_progress)
		verbose_printk(KERN_EMERG "Kernel OOPS in progress\n");

	if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)
		verbose_printk(KERN_NOTICE "HW Error context\n");
	else if (context & 0x0020)
		verbose_printk(KERN_NOTICE "Deferred Exception context\n");
	else if (context & 0x3FC0)
		verbose_printk(KERN_NOTICE "Interrupt context\n");
	else if (context & 0x4000)
		verbose_printk(KERN_NOTICE "Deferred Interrupt context\n");
	else if (context & 0x8000)
		verbose_printk(KERN_NOTICE "Kernel process context\n");

	/* Because we are crashing, and pointers could be bad, we check things
	 * pretty closely before we use them
	 */
	if ((unsigned long)current >= FIXED_CODE_START &&
	    !((unsigned long)current & 0x3) && current->pid) {
		verbose_printk(KERN_NOTICE "CURRENT PROCESS:\n");
		if (current->comm >= (char *)FIXED_CODE_START)
			verbose_printk(KERN_NOTICE "COMM=%s PID=%d",
				current->comm, current->pid);
		else
			verbose_printk(KERN_NOTICE "COMM= invalid");

		printk(KERN_CONT " CPU=%d\n", current_thread_info()->cpu);
		if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
			verbose_printk(KERN_NOTICE
				"TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
				" BSS = 0x%p-0x%p  USER-STACK = 0x%p\n\n",
				(void *)current->mm->start_code,
				(void *)current->mm->end_code,
				(void *)current->mm->start_data,
				(void *)current->mm->end_data,
				(void *)current->mm->end_data,
				(void *)current->mm->brk,
				(void *)current->mm->start_stack);
		else
			verbose_printk(KERN_NOTICE "invalid mm\n");
	} else
		verbose_printk(KERN_NOTICE
			       "No Valid process in current context\n");
#endif
}

void dump_bfin_mem(struct pt_regs *fp)
{
#ifdef CONFIG_DEBUG_VERBOSE
	unsigned short *addr, *erraddr, val = 0, err = 0;
	char sti = 0, buf[6];

	erraddr = (void *)fp->pc;

	verbose_printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr);

	for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10;
	     addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
	     addr++) {
		if (!((unsigned long)addr & 0xF))
			verbose_printk(KERN_NOTICE "0x%p: ", addr);

		if (!get_instruction(&val, addr)) {
				val = 0;
				sprintf(buf, "????");
		} else
			sprintf(buf, "%04x", val);

		if (addr == erraddr) {
			verbose_printk("[%s]", buf);
			err = val;
		} else
			verbose_printk(" %s ", buf);

		/* Do any previous instructions turn on interrupts? */
		if (addr <= erraddr &&				/* in the past */
		    ((val >= 0x0040 && val <= 0x0047) ||	/* STI instruction */
		      val == 0x017b))				/* [SP++] = RETI */
			sti = 1;
	}

	verbose_printk("\n");

	/* Hardware error interrupts can be deferred */
	if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR &&
	    oops_in_progress)){
		verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
#ifndef CONFIG_DEBUG_HWERR
		verbose_printk(KERN_NOTICE
"The remaining message may be meaningless\n"
"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
#else
		/* If we are handling only one peripheral interrupt
		 * and current mm and pid are valid, and the last error
		 * was in that user space process's text area
		 * print it out - because that is where the problem exists
		 */
		if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) &&
		     (current->pid && current->mm)) {
			/* And the last RETI points to the current userspace context */
			if ((fp + 1)->pc >= current->mm->start_code &&
			    (fp + 1)->pc <= current->mm->end_code) {
				verbose_printk(KERN_NOTICE "It might be better to look around here : \n");
				verbose_printk(KERN_NOTICE "-------------------------------------------\n");
				show_regs(fp + 1);
				verbose_printk(KERN_NOTICE "-------------------------------------------\n");
			}
		}
#endif
	}
#endif
}

void show_regs(struct pt_regs *fp)
{
#ifdef CONFIG_DEBUG_VERBOSE
	char buf [150];
	struct irqaction *action;
	unsigned int i;
	unsigned long flags = 0;
	unsigned int cpu = raw_smp_processor_id();
	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();

	verbose_printk(KERN_NOTICE "\n");
	if (CPUID != bfin_cpuid())
		verbose_printk(KERN_NOTICE "Compiled for cpu family 0x%04x (Rev %d), "
			"but running on:0x%04x (Rev %d)\n",
			CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid());

	verbose_printk(KERN_NOTICE "ADSP-%s-0.%d",
		CPU, bfin_compiled_revid());

	if (bfin_compiled_revid() !=  bfin_revid())
		verbose_printk("(Detected 0.%d)", bfin_revid());

	verbose_printk(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n",
		get_cclk()/1000000, get_sclk()/1000000,
#ifdef CONFIG_MPU
		"mpu on"
#else
		"mpu off"
#endif
		);

	verbose_printk(KERN_NOTICE "%s", linux_banner);

	verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n", print_tainted());
	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  IMASK: %04lx  SYSCFG: %04lx\n",
		(long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg);
	if (fp->ipend & EVT_IRPTEN)
		verbose_printk(KERN_NOTICE "  Global Interrupts Disabled (IPEND[4])\n");
	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 |
			EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR)))
		verbose_printk(KERN_NOTICE "  Peripheral interrupts masked off\n");
	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14)))
		verbose_printk(KERN_NOTICE "  Kernel interrupts masked off\n");
	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
		verbose_printk(KERN_NOTICE "  HWERRCAUSE: 0x%lx\n",
			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
#ifdef EBIU_ERRMST
		/* If the error was from the EBIU, print it out */
		if (bfin_read_EBIU_ERRMST() & CORE_ERROR) {
			verbose_printk(KERN_NOTICE "  EBIU Error Reason  : 0x%04x\n",
				bfin_read_EBIU_ERRMST());
			verbose_printk(KERN_NOTICE "  EBIU Error Address : 0x%08x\n",
				bfin_read_EBIU_ERRADD());
		}
#endif
	}
	verbose_printk(KERN_NOTICE "  EXCAUSE   : 0x%lx\n",
		fp->seqstat & SEQSTAT_EXCAUSE);
	for (i = 2; i <= 15 ; i++) {
		if (fp->ipend & (1 << i)) {
			if (i != 4) {
				decode_address(buf, bfin_read32(EVT0 + 4*i));
				verbose_printk(KERN_NOTICE "  physical IVG%i asserted : %s\n", i, buf);
			} else
				verbose_printk(KERN_NOTICE "  interrupts disabled\n");
		}
	}

	/* if no interrupts are going off, don't print this out */
	if (fp->ipend & ~0x3F) {
		for (i = 0; i < (NR_IRQS - 1); i++) {
			if (!in_atomic)
				spin_lock_irqsave(&irq_desc[i].lock, flags);

			action = irq_desc[i].action;
			if (!action)
				goto unlock;

			decode_address(buf, (unsigned int)action->handler);
			verbose_printk(KERN_NOTICE "  logical irq %3d mapped  : %s", i, buf);
			for (action = action->next; action; action = action->next) {
				decode_address(buf, (unsigned int)action->handler);
				verbose_printk(", %s", buf);
			}
			verbose_printk("\n");
unlock:
			if (!in_atomic)
				spin_unlock_irqrestore(&irq_desc[i].lock, flags);
		}
	}

	decode_address(buf, fp->rete);
	verbose_printk(KERN_NOTICE " RETE: %s\n", buf);
	decode_address(buf, fp->retn);
	verbose_printk(KERN_NOTICE " RETN: %s\n", buf);
	decode_address(buf, fp->retx);
	verbose_printk(KERN_NOTICE " RETX: %s\n", buf);
	decode_address(buf, fp->rets);
	verbose_printk(KERN_NOTICE " RETS: %s\n", buf);
	decode_address(buf, fp->pc);
	verbose_printk(KERN_NOTICE " PC  : %s\n", buf);

	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) &&
	    (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) {
		decode_address(buf, cpu_pda[cpu].dcplb_fault_addr);
		verbose_printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf);
		decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
		verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
	}

	verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n");
	verbose_printk(KERN_NOTICE " R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
		fp->r0, fp->r1, fp->r2, fp->r3);
	verbose_printk(KERN_NOTICE " R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
		fp->r4, fp->r5, fp->r6, fp->r7);
	verbose_printk(KERN_NOTICE " P0 : %08lx    P1 : %08lx    P2 : %08lx    P3 : %08lx\n",
		fp->p0, fp->p1, fp->p2, fp->p3);
	verbose_printk(KERN_NOTICE " P4 : %08lx    P5 : %08lx    FP : %08lx    SP : %08lx\n",
		fp->p4, fp->p5, fp->fp, (long)fp);
	verbose_printk(KERN_NOTICE " LB0: %08lx    LT0: %08lx    LC0: %08lx\n",
		fp->lb0, fp->lt0, fp->lc0);
	verbose_printk(KERN_NOTICE " LB1: %08lx    LT1: %08lx    LC1: %08lx\n",
		fp->lb1, fp->lt1, fp->lc1);
	verbose_printk(KERN_NOTICE " B0 : %08lx    L0 : %08lx    M0 : %08lx    I0 : %08lx\n",
		fp->b0, fp->l0, fp->m0, fp->i0);
	verbose_printk(KERN_NOTICE " B1 : %08lx    L1 : %08lx    M1 : %08lx    I1 : %08lx\n",
		fp->b1, fp->l1, fp->m1, fp->i1);
	verbose_printk(KERN_NOTICE " B2 : %08lx    L2 : %08lx    M2 : %08lx    I2 : %08lx\n",
		fp->b2, fp->l2, fp->m2, fp->i2);
	verbose_printk(KERN_NOTICE " B3 : %08lx    L3 : %08lx    M3 : %08lx    I3 : %08lx\n",
		fp->b3, fp->l3, fp->m3, fp->i3);
	verbose_printk(KERN_NOTICE "A0.w: %08lx   A0.x: %08lx   A1.w: %08lx   A1.x: %08lx\n",
		fp->a0w, fp->a0x, fp->a1w, fp->a1x);

	verbose_printk(KERN_NOTICE "USP : %08lx  ASTAT: %08lx\n",
		rdusp(), fp->astat);

	verbose_printk(KERN_NOTICE "\n");
#endif
}

#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
asmlinkage int sys_bfin_spinlock(int *spinlock)__attribute__((l1_text));
#endif

static DEFINE_SPINLOCK(bfin_spinlock_lock);

asmlinkage int sys_bfin_spinlock(int *p)
{
	int ret, tmp = 0;

	spin_lock(&bfin_spinlock_lock);	/* This would also hold kernel preemption. */
	ret = get_user(tmp, p);
	if (likely(ret == 0)) {
		if (unlikely(tmp))
			ret = 1;
		else
			put_user(1, p);
	}
	spin_unlock(&bfin_spinlock_lock);
	return ret;
}

int bfin_request_exception(unsigned int exception, void (*handler)(void))
{
	void (*curr_handler)(void);

	if (exception > 0x3F)
		return -EINVAL;

	curr_handler = ex_table[exception];

	if (curr_handler != ex_replaceable)
		return -EBUSY;

	ex_table[exception] = handler;

	return 0;
}
EXPORT_SYMBOL(bfin_request_exception);

int bfin_free_exception(unsigned int exception, void (*handler)(void))
{
	void (*curr_handler)(void);

	if (exception > 0x3F)
		return -EINVAL;

	curr_handler = ex_table[exception];

	if (curr_handler != handler)
		return -EBUSY;

	ex_table[exception] = ex_replaceable;

	return 0;
}
EXPORT_SYMBOL(bfin_free_exception);

void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
{
	switch (cplb_panic) {
	case CPLB_NO_UNLOCKED:
		printk(KERN_EMERG "All CPLBs are locked\n");
		break;
	case CPLB_PROT_VIOL:
		return;
	case CPLB_NO_ADDR_MATCH:
		return;
	case CPLB_UNKNOWN_ERR:
		printk(KERN_EMERG "Unknown CPLB Exception\n");
		break;
	}

	oops_in_progress = 1;

	dump_bfin_process(fp);
	dump_bfin_mem(fp);
	show_regs(fp);
	dump_stack();
	panic("Unrecoverable event");
}