| Padmavathi Venna | 323d771 | 2011-12-23 10:14:45 +0900 | [diff] [blame] | 1 | /* linux/arch/arm/mach-s5pc100/setup-spi.c | 
 | 2 |  * | 
 | 3 |  * Copyright (C) 2011 Samsung Electronics Ltd. | 
 | 4 |  *		http://www.samsung.com/ | 
 | 5 |  * | 
 | 6 |  * This program is free software; you can redistribute it and/or modify | 
 | 7 |  * it under the terms of the GNU General Public License version 2 as | 
 | 8 |  * published by the Free Software Foundation. | 
 | 9 |  */ | 
 | 10 |  | 
 | 11 | #include <linux/gpio.h> | 
 | 12 | #include <linux/platform_device.h> | 
 | 13 |  | 
 | 14 | #include <plat/gpio-cfg.h> | 
 | 15 | #include <plat/s3c64xx-spi.h> | 
 | 16 |  | 
 | 17 | #ifdef CONFIG_S3C64XX_DEV_SPI0 | 
 | 18 | struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { | 
 | 19 | 	.fifo_lvl_mask	= 0x7f, | 
 | 20 | 	.rx_lvl_offset	= 13, | 
 | 21 | 	.high_speed	= 1, | 
 | 22 | 	.tx_st_done	= 21, | 
 | 23 | }; | 
 | 24 |  | 
 | 25 | int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) | 
 | 26 | { | 
 | 27 | 	s3c_gpio_cfgall_range(S5PC100_GPB(0), 3, | 
 | 28 | 				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); | 
 | 29 | 	return 0; | 
 | 30 | } | 
 | 31 | #endif | 
 | 32 |  | 
 | 33 | #ifdef CONFIG_S3C64XX_DEV_SPI1 | 
 | 34 | struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = { | 
 | 35 | 	.fifo_lvl_mask	= 0x7f, | 
 | 36 | 	.rx_lvl_offset	= 13, | 
 | 37 | 	.high_speed	= 1, | 
 | 38 | 	.tx_st_done	= 21, | 
 | 39 | }; | 
 | 40 |  | 
 | 41 | int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) | 
 | 42 | { | 
 | 43 | 	s3c_gpio_cfgall_range(S5PC100_GPB(4), 3, | 
 | 44 | 				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); | 
 | 45 | 	return 0; | 
 | 46 | } | 
 | 47 | #endif | 
 | 48 |  | 
 | 49 | #ifdef CONFIG_S3C64XX_DEV_SPI2 | 
 | 50 | struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = { | 
 | 51 | 	.fifo_lvl_mask	= 0x7f, | 
 | 52 | 	.rx_lvl_offset	= 13, | 
 | 53 | 	.high_speed	= 1, | 
 | 54 | 	.tx_st_done	= 21, | 
 | 55 | }; | 
 | 56 |  | 
 | 57 | int s3c64xx_spi2_cfg_gpio(struct platform_device *dev) | 
 | 58 | { | 
 | 59 | 	s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3)); | 
 | 60 | 	s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP); | 
 | 61 | 	s3c_gpio_cfgall_range(S5PC100_GPB(2), 2, | 
 | 62 | 				S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); | 
 | 63 | 	return 0; | 
 | 64 | } | 
 | 65 | #endif |