| Daniel Laird | 33c050c | 2008-11-05 16:46:49 +0100 | [diff] [blame] | 1 | /* | 
 | 2 |  *  PNX833x Hardware Watchdog Driver | 
 | 3 |  *  Copyright 2008 NXP Semiconductors | 
 | 4 |  *  Daniel Laird <daniel.j.laird@nxp.com> | 
 | 5 |  *  Andre McCurdy <andre.mccurdy@nxp.com> | 
 | 6 |  * | 
 | 7 |  *  Heavily based upon - IndyDog	0.3 | 
 | 8 |  *  A Hardware Watchdog Device for SGI IP22 | 
 | 9 |  * | 
 | 10 |  * (c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>, All Rights Reserved. | 
 | 11 |  * | 
 | 12 |  * This program is free software; you can redistribute it and/or | 
 | 13 |  * modify it under the terms of the GNU General Public License | 
 | 14 |  * as published by the Free Software Foundation; either version | 
 | 15 |  * 2 of the License, or (at your option) any later version. | 
 | 16 |  * | 
 | 17 |  * based on softdog.c by Alan Cox <alan@redhat.com> | 
 | 18 |  */ | 
 | 19 |  | 
 | 20 | #include <linux/module.h> | 
 | 21 | #include <linux/moduleparam.h> | 
 | 22 | #include <linux/types.h> | 
 | 23 | #include <linux/kernel.h> | 
 | 24 | #include <linux/fs.h> | 
 | 25 | #include <linux/mm.h> | 
 | 26 | #include <linux/miscdevice.h> | 
 | 27 | #include <linux/watchdog.h> | 
 | 28 | #include <linux/notifier.h> | 
 | 29 | #include <linux/reboot.h> | 
 | 30 | #include <linux/init.h> | 
 | 31 | #include <asm/mach-pnx833x/pnx833x.h> | 
 | 32 |  | 
 | 33 | #define PFX "pnx833x: " | 
 | 34 | #define WATCHDOG_TIMEOUT 30		/* 30 sec Maximum timeout */ | 
 | 35 | #define WATCHDOG_COUNT_FREQUENCY 68000000U /* Watchdog counts at 68MHZ. */ | 
 | 36 |  | 
 | 37 | /** CONFIG block */ | 
 | 38 | #define PNX833X_CONFIG                      (0x07000U) | 
 | 39 | #define PNX833X_CONFIG_CPU_WATCHDOG         (0x54) | 
 | 40 | #define PNX833X_CONFIG_CPU_WATCHDOG_COMPARE (0x58) | 
 | 41 | #define PNX833X_CONFIG_CPU_COUNTERS_CONTROL (0x1c) | 
 | 42 |  | 
 | 43 | /** RESET block */ | 
 | 44 | #define PNX833X_RESET                       (0x08000U) | 
 | 45 | #define PNX833X_RESET_CONFIG                (0x08) | 
 | 46 |  | 
 | 47 | static int pnx833x_wdt_alive; | 
 | 48 |  | 
 | 49 | /* Set default timeout in MHZ.*/ | 
 | 50 | static int pnx833x_wdt_timeout = (WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY); | 
 | 51 | module_param(pnx833x_wdt_timeout, int, 0); | 
 | 52 | MODULE_PARM_DESC(timeout, "Watchdog timeout in Mhz. (68Mhz clock), default=" | 
 | 53 | 			__MODULE_STRING(pnx833x_wdt_timeout) "(30 seconds)."); | 
 | 54 |  | 
 | 55 | static int nowayout = WATCHDOG_NOWAYOUT; | 
 | 56 | module_param(nowayout, int, 0); | 
 | 57 | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" | 
 | 58 | 					__MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); | 
 | 59 |  | 
 | 60 | static int start_enabled = 1; | 
 | 61 | module_param(start_enabled, int, 0); | 
 | 62 | MODULE_PARM_DESC(start_enabled, "Watchdog is started on module insertion " | 
 | 63 | 				"(default=" __MODULE_STRING(start_enabled) ")"); | 
 | 64 |  | 
 | 65 | static void pnx833x_wdt_start(void) | 
 | 66 | { | 
 | 67 | 	/* Enable watchdog causing reset. */ | 
 | 68 | 	PNX833X_REG(PNX833X_RESET + PNX833X_RESET_CONFIG) |= 0x1; | 
 | 69 | 	/* Set timeout.*/ | 
 | 70 | 	PNX833X_REG(PNX833X_CONFIG + | 
 | 71 | 		PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout; | 
 | 72 | 	/* Enable watchdog. */ | 
 | 73 | 	PNX833X_REG(PNX833X_CONFIG + | 
 | 74 | 				PNX833X_CONFIG_CPU_COUNTERS_CONTROL) |= 0x1; | 
 | 75 |  | 
 | 76 | 	printk(KERN_INFO PFX "Started watchdog timer.\n"); | 
 | 77 | } | 
 | 78 |  | 
 | 79 | static void pnx833x_wdt_stop(void) | 
 | 80 | { | 
 | 81 | 	/* Disable watchdog causing reset. */ | 
 | 82 | 	PNX833X_REG(PNX833X_RESET + PNX833X_CONFIG) &= 0xFFFFFFFE; | 
 | 83 | 	/* Disable watchdog.*/ | 
 | 84 | 	PNX833X_REG(PNX833X_CONFIG + | 
 | 85 | 			PNX833X_CONFIG_CPU_COUNTERS_CONTROL) &= 0xFFFFFFFE; | 
 | 86 |  | 
 | 87 | 	printk(KERN_INFO PFX "Stopped watchdog timer.\n"); | 
 | 88 | } | 
 | 89 |  | 
 | 90 | static void pnx833x_wdt_ping(void) | 
 | 91 | { | 
 | 92 | 	PNX833X_REG(PNX833X_CONFIG + | 
 | 93 | 		PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout; | 
 | 94 | } | 
 | 95 |  | 
 | 96 | /* | 
 | 97 |  *	Allow only one person to hold it open | 
 | 98 |  */ | 
 | 99 | static int pnx833x_wdt_open(struct inode *inode, struct file *file) | 
 | 100 | { | 
 | 101 | 	if (test_and_set_bit(0, &pnx833x_wdt_alive)) | 
 | 102 | 		return -EBUSY; | 
 | 103 |  | 
 | 104 | 	if (nowayout) | 
 | 105 | 		__module_get(THIS_MODULE); | 
 | 106 |  | 
 | 107 | 	/* Activate timer */ | 
 | 108 | 	if (!start_enabled) | 
 | 109 | 		pnx833x_wdt_start(); | 
 | 110 |  | 
 | 111 | 	pnx833x_wdt_ping(); | 
 | 112 |  | 
 | 113 | 	printk(KERN_INFO "Started watchdog timer.\n"); | 
 | 114 |  | 
 | 115 | 	return nonseekable_open(inode, file); | 
 | 116 | } | 
 | 117 |  | 
 | 118 | static int pnx833x_wdt_release(struct inode *inode, struct file *file) | 
 | 119 | { | 
 | 120 | 	/* Shut off the timer. | 
 | 121 | 	 * Lock it in if it's a module and we defined ...NOWAYOUT */ | 
 | 122 | 	if (!nowayout) | 
 | 123 | 		pnx833x_wdt_stop(); /* Turn the WDT off */ | 
 | 124 |  | 
 | 125 | 	clear_bit(0, &pnx833x_wdt_alive); | 
 | 126 | 	return 0; | 
 | 127 | } | 
 | 128 |  | 
 | 129 | static ssize_t pnx833x_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) | 
 | 130 | { | 
 | 131 | 	/* Refresh the timer. */ | 
 | 132 | 	if (len) | 
 | 133 | 		pnx833x_wdt_ping(); | 
 | 134 |  | 
 | 135 | 	return len; | 
 | 136 | } | 
 | 137 |  | 
 | 138 | static long pnx833x_wdt_ioctl(struct file *file, unsigned int cmd, | 
 | 139 | 							unsigned long arg) | 
 | 140 | { | 
 | 141 | 	int options, new_timeout = 0; | 
 | 142 | 	uint32_t timeout, timeout_left = 0; | 
 | 143 |  | 
 | 144 | 	static struct watchdog_info ident = { | 
 | 145 | 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT, | 
 | 146 | 		.firmware_version = 0, | 
 | 147 | 		.identity = "Hardware Watchdog for PNX833x", | 
 | 148 | 	}; | 
 | 149 |  | 
 | 150 | 	switch (cmd) { | 
 | 151 | 	default: | 
 | 152 | 		return -ENOTTY; | 
 | 153 |  | 
 | 154 | 	case WDIOC_GETSUPPORT: | 
 | 155 | 		if (copy_to_user((struct watchdog_info *)arg, | 
 | 156 | 				 &ident, sizeof(ident))) | 
 | 157 | 			return -EFAULT; | 
 | 158 | 		return 0; | 
 | 159 |  | 
 | 160 | 	case WDIOC_GETSTATUS: | 
 | 161 | 	case WDIOC_GETBOOTSTATUS: | 
 | 162 | 		return put_user(0, (int *)arg); | 
 | 163 |  | 
 | 164 | 	case WDIOC_SETOPTIONS: | 
 | 165 | 		if (get_user(options, (int *)arg)) | 
 | 166 | 			return -EFAULT; | 
 | 167 |  | 
 | 168 | 		if (options & WDIOS_DISABLECARD) | 
 | 169 | 			pnx833x_wdt_stop(); | 
 | 170 |  | 
 | 171 | 		if (options & WDIOS_ENABLECARD) | 
 | 172 | 			pnx833x_wdt_start(); | 
 | 173 |  | 
 | 174 | 		return 0; | 
 | 175 |  | 
 | 176 | 	case WDIOC_KEEPALIVE: | 
 | 177 | 		pnx833x_wdt_ping(); | 
 | 178 | 		return 0; | 
 | 179 |  | 
 | 180 | 	case WDIOC_SETTIMEOUT: | 
 | 181 | 	{ | 
 | 182 | 		if (get_user(new_timeout, (int *)arg)) | 
 | 183 | 			return -EFAULT; | 
 | 184 |  | 
 | 185 | 		pnx833x_wdt_timeout = new_timeout; | 
 | 186 | 		PNX833X_REG(PNX833X_CONFIG + | 
 | 187 | 			PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = new_timeout; | 
 | 188 | 		return put_user(new_timeout, (int *)arg); | 
 | 189 | 	} | 
 | 190 |  | 
 | 191 | 	case WDIOC_GETTIMEOUT: | 
 | 192 | 		timeout = PNX833X_REG(PNX833X_CONFIG + | 
 | 193 | 					PNX833X_CONFIG_CPU_WATCHDOG_COMPARE); | 
 | 194 | 		return put_user(timeout, (int *)arg); | 
 | 195 |  | 
 | 196 | 	case WDIOC_GETTIMELEFT: | 
 | 197 | 		timeout_left = PNX833X_REG(PNX833X_CONFIG + | 
 | 198 | 						PNX833X_CONFIG_CPU_WATCHDOG); | 
 | 199 | 		return put_user(timeout_left, (int *)arg); | 
 | 200 |  | 
 | 201 | 	} | 
 | 202 | } | 
 | 203 |  | 
 | 204 | static int pnx833x_wdt_notify_sys(struct notifier_block *this, | 
 | 205 | 					unsigned long code, void *unused) | 
 | 206 | { | 
 | 207 | 	if (code == SYS_DOWN || code == SYS_HALT) | 
 | 208 | 		pnx833x_wdt_stop(); /* Turn the WDT off */ | 
 | 209 |  | 
 | 210 | 	return NOTIFY_DONE; | 
 | 211 | } | 
 | 212 |  | 
 | 213 | static const struct file_operations pnx833x_wdt_fops = { | 
 | 214 | 	.owner		= THIS_MODULE, | 
 | 215 | 	.llseek		= no_llseek, | 
 | 216 | 	.write		= pnx833x_wdt_write, | 
 | 217 | 	.unlocked_ioctl	= pnx833x_wdt_ioctl, | 
 | 218 | 	.open		= pnx833x_wdt_open, | 
 | 219 | 	.release	= pnx833x_wdt_release, | 
 | 220 | }; | 
 | 221 |  | 
 | 222 | static struct miscdevice pnx833x_wdt_miscdev = { | 
 | 223 | 	.minor		= WATCHDOG_MINOR, | 
 | 224 | 	.name		= "watchdog", | 
 | 225 | 	.fops		= &pnx833x_wdt_fops, | 
 | 226 | }; | 
 | 227 |  | 
 | 228 | static struct notifier_block pnx833x_wdt_notifier = { | 
 | 229 | 	.notifier_call = pnx833x_wdt_notify_sys, | 
 | 230 | }; | 
 | 231 |  | 
 | 232 | static char banner[] __initdata = | 
 | 233 | 	KERN_INFO PFX "Hardware Watchdog Timer for PNX833x: Version 0.1\n"; | 
 | 234 |  | 
 | 235 | static int __init watchdog_init(void) | 
 | 236 | { | 
 | 237 | 	int ret, cause; | 
 | 238 |  | 
 | 239 | 	/* Lets check the reason for the reset.*/ | 
 | 240 | 	cause = PNX833X_REG(PNX833X_RESET); | 
 | 241 | 	/*If bit 31 is set then watchdog was cause of reset.*/ | 
 | 242 | 	if (cause & 0x80000000) { | 
 | 243 | 		printk(KERN_INFO PFX "The system was previously reset due to " | 
 | 244 | 			"the watchdog firing - please investigate...\n"); | 
 | 245 | 	} | 
 | 246 |  | 
 | 247 | 	ret = register_reboot_notifier(&pnx833x_wdt_notifier); | 
 | 248 | 	if (ret) { | 
 | 249 | 		printk(KERN_ERR PFX | 
 | 250 | 			"cannot register reboot notifier (err=%d)\n", ret); | 
 | 251 | 		return ret; | 
 | 252 | 	} | 
 | 253 |  | 
 | 254 | 	ret = misc_register(&pnx833x_wdt_miscdev); | 
 | 255 | 	if (ret) { | 
 | 256 | 		printk(KERN_ERR PFX | 
 | 257 | 			"cannot register miscdev on minor=%d (err=%d)\n", | 
 | 258 | 			WATCHDOG_MINOR, ret); | 
 | 259 | 		unregister_reboot_notifier(&pnx833x_wdt_notifier); | 
 | 260 | 		return ret; | 
 | 261 | 	} | 
 | 262 |  | 
 | 263 | 	printk(banner); | 
 | 264 | 	if (start_enabled) | 
 | 265 | 		pnx833x_wdt_start(); | 
 | 266 |  | 
 | 267 | 	return 0; | 
 | 268 | } | 
 | 269 |  | 
 | 270 | static void __exit watchdog_exit(void) | 
 | 271 | { | 
 | 272 | 	misc_deregister(&pnx833x_wdt_miscdev); | 
 | 273 | 	unregister_reboot_notifier(&pnx833x_wdt_notifier); | 
 | 274 | } | 
 | 275 |  | 
 | 276 | module_init(watchdog_init); | 
 | 277 | module_exit(watchdog_exit); | 
 | 278 |  | 
 | 279 | MODULE_AUTHOR("Daniel Laird/Andre McCurdy"); | 
 | 280 | MODULE_DESCRIPTION("Hardware Watchdog Device for PNX833x"); | 
 | 281 | MODULE_LICENSE("GPL"); | 
 | 282 | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |