| David VomLehn | a3a0f8c | 2009-08-30 17:15:11 -0700 | [diff] [blame^] | 1 | /* |
| 2 | * Locations of devices in the Calliope ASIC. |
| 3 | * |
| 4 | * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation; either version 2 of the License, or |
| 9 | * (at your option) any later version. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
| 15 | * |
| 16 | * You should have received a copy of the GNU General Public License |
| 17 | * along with this program; if not, write to the Free Software |
| 18 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| 19 | * |
| 20 | * Author: Ken Eppinett |
| 21 | * David Schleef <ds@schleef.org> |
| 22 | * |
| 23 | * Description: Defines the platform resources for the SA settop. |
| 24 | */ |
| 25 | |
| 26 | #include <asm/mach-powertv/asic.h> |
| 27 | |
| 28 | const struct register_map calliope_register_map = { |
| 29 | .eic_slow0_strt_add = 0x800000, |
| 30 | .eic_cfg_bits = 0x800038, |
| 31 | .eic_ready_status = 0x80004c, |
| 32 | |
| 33 | .chipver3 = 0xA00800, |
| 34 | .chipver2 = 0xA00804, |
| 35 | .chipver1 = 0xA00808, |
| 36 | .chipver0 = 0xA0080c, |
| 37 | |
| 38 | /* The registers of IRBlaster */ |
| 39 | .uart1_intstat = 0xA01800, |
| 40 | .uart1_inten = 0xA01804, |
| 41 | .uart1_config1 = 0xA01808, |
| 42 | .uart1_config2 = 0xA0180C, |
| 43 | .uart1_divisorhi = 0xA01810, |
| 44 | .uart1_divisorlo = 0xA01814, |
| 45 | .uart1_data = 0xA01818, |
| 46 | .uart1_status = 0xA0181C, |
| 47 | |
| 48 | .int_stat_3 = 0xA02800, |
| 49 | .int_stat_2 = 0xA02804, |
| 50 | .int_stat_1 = 0xA02808, |
| 51 | .int_stat_0 = 0xA0280c, |
| 52 | .int_config = 0xA02810, |
| 53 | .int_int_scan = 0xA02818, |
| 54 | .ien_int_3 = 0xA02830, |
| 55 | .ien_int_2 = 0xA02834, |
| 56 | .ien_int_1 = 0xA02838, |
| 57 | .ien_int_0 = 0xA0283c, |
| 58 | .int_level_3_3 = 0xA02880, |
| 59 | .int_level_3_2 = 0xA02884, |
| 60 | .int_level_3_1 = 0xA02888, |
| 61 | .int_level_3_0 = 0xA0288c, |
| 62 | .int_level_2_3 = 0xA02890, |
| 63 | .int_level_2_2 = 0xA02894, |
| 64 | .int_level_2_1 = 0xA02898, |
| 65 | .int_level_2_0 = 0xA0289c, |
| 66 | .int_level_1_3 = 0xA028a0, |
| 67 | .int_level_1_2 = 0xA028a4, |
| 68 | .int_level_1_1 = 0xA028a8, |
| 69 | .int_level_1_0 = 0xA028ac, |
| 70 | .int_level_0_3 = 0xA028b0, |
| 71 | .int_level_0_2 = 0xA028b4, |
| 72 | .int_level_0_1 = 0xA028b8, |
| 73 | .int_level_0_0 = 0xA028bc, |
| 74 | .int_docsis_en = 0xA028F4, |
| 75 | |
| 76 | .mips_pll_setup = 0x980000, |
| 77 | .usb_fs = 0x980030, /* -default 72800028- */ |
| 78 | .test_bus = 0x9800CC, |
| 79 | .crt_spare = 0x9800d4, |
| 80 | .usb2_ohci_int_mask = 0x9A000c, |
| 81 | .usb2_strap = 0x9A0014, |
| 82 | .ehci_hcapbase = 0x9BFE00, |
| 83 | .ohci_hc_revision = 0x9BFC00, |
| 84 | .bcm1_bs_lmi_steer = 0x9E0004, |
| 85 | .usb2_control = 0x9E0054, |
| 86 | .usb2_stbus_obc = 0x9BFF00, |
| 87 | .usb2_stbus_mess_size = 0x9BFF04, |
| 88 | .usb2_stbus_chunk_size = 0x9BFF08, |
| 89 | |
| 90 | .pcie_regs = 0x000000, /* -doesn't exist- */ |
| 91 | .tim_ch = 0xA02C10, |
| 92 | .tim_cl = 0xA02C14, |
| 93 | .gpio_dout = 0xA02c20, |
| 94 | .gpio_din = 0xA02c24, |
| 95 | .gpio_dir = 0xA02c2C, |
| 96 | .watchdog = 0xA02c30, |
| 97 | .front_panel = 0x000000, /* -not used- */ |
| 98 | }; |