Hans-Christian Egtvedt | a3bee42 | 2008-07-01 08:29:27 +0000 | [diff] [blame^] | 1 | /* |
| 2 | * Board-specific setup code for the ATEVKLCD10X addon board to the ATNGW100 |
| 3 | * Network Gateway |
| 4 | * |
| 5 | * Copyright (C) 2008 Atmel Corporation |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify it |
| 8 | * under the terms of the GNU General Public License version 2 as published by |
| 9 | * the Free Software Foundation. |
| 10 | */ |
| 11 | |
| 12 | #include <linux/init.h> |
| 13 | #include <linux/linkage.h> |
| 14 | #include <linux/fb.h> |
| 15 | #include <linux/platform_device.h> |
| 16 | |
| 17 | #include <video/atmel_lcdc.h> |
| 18 | |
| 19 | #include <asm/setup.h> |
| 20 | |
| 21 | #include <mach/at32ap700x.h> |
| 22 | #include <mach/board.h> |
| 23 | |
| 24 | static struct ac97c_platform_data __initdata ac97c0_data = { |
| 25 | .dma_rx_periph_id = 3, |
| 26 | .dma_tx_periph_id = 4, |
| 27 | .dma_controller_id = 0, |
| 28 | .reset_pin = GPIO_PIN_PB(19), |
| 29 | }; |
| 30 | |
| 31 | #ifdef CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA |
| 32 | static struct fb_videomode __initdata tcg057vglad_modes[] = { |
| 33 | { |
| 34 | .name = "640x480 @ 60", |
| 35 | .refresh = 60, |
| 36 | .xres = 640, .yres = 480, |
| 37 | .pixclock = KHZ2PICOS(25180), |
| 38 | |
| 39 | .left_margin = 64, .right_margin = 31, |
| 40 | .upper_margin = 34, .lower_margin = 2, |
| 41 | .hsync_len = 96, .vsync_len = 4, |
| 42 | |
| 43 | .sync = 0, |
| 44 | .vmode = FB_VMODE_NONINTERLACED, |
| 45 | }, |
| 46 | }; |
| 47 | |
| 48 | static struct fb_monspecs __initdata atevklcd10x_default_monspecs = { |
| 49 | .manufacturer = "KYO", |
| 50 | .monitor = "TCG057VGLAD", |
| 51 | .modedb = tcg057vglad_modes, |
| 52 | .modedb_len = ARRAY_SIZE(tcg057vglad_modes), |
| 53 | .hfmin = 19948, |
| 54 | .hfmax = 31478, |
| 55 | .vfmin = 50, |
| 56 | .vfmax = 67, |
| 57 | .dclkmax = 28330000, |
| 58 | }; |
| 59 | |
| 60 | static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = { |
| 61 | .default_bpp = 16, |
| 62 | .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, |
| 63 | .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT |
| 64 | | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE |
| 65 | | ATMEL_LCDC_MEMOR_BIG), |
| 66 | .default_monspecs = &atevklcd10x_default_monspecs, |
| 67 | .guard_time = 2, |
| 68 | }; |
| 69 | #elif CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA |
| 70 | static struct fb_videomode __initdata tcg057qvlad_modes[] = { |
| 71 | { |
| 72 | .name = "320x240 @ 60", |
| 73 | .refresh = 60, |
| 74 | .xres = 320, .yres = 240, |
| 75 | .pixclock = KHZ2PICOS(6300), |
| 76 | |
| 77 | .left_margin = 52, .right_margin = 28, |
| 78 | .upper_margin = 7, .lower_margin = 2, |
| 79 | .hsync_len = 96, .vsync_len = 4, |
| 80 | |
| 81 | .sync = 0, |
| 82 | .vmode = FB_VMODE_NONINTERLACED, |
| 83 | }, |
| 84 | }; |
| 85 | |
| 86 | static struct fb_monspecs __initdata atevklcd10x_default_monspecs = { |
| 87 | .manufacturer = "KYO", |
| 88 | .monitor = "TCG057QVLAD", |
| 89 | .modedb = tcg057qvlad_modes, |
| 90 | .modedb_len = ARRAY_SIZE(tcg057qvlad_modes), |
| 91 | .hfmin = 19948, |
| 92 | .hfmax = 31478, |
| 93 | .vfmin = 50, |
| 94 | .vfmax = 67, |
| 95 | .dclkmax = 7000000, |
| 96 | }; |
| 97 | |
| 98 | static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = { |
| 99 | .default_bpp = 16, |
| 100 | .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, |
| 101 | .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT |
| 102 | | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE |
| 103 | | ATMEL_LCDC_MEMOR_BIG), |
| 104 | .default_monspecs = &atevklcd10x_default_monspecs, |
| 105 | .guard_time = 2, |
| 106 | }; |
| 107 | #elif CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA |
| 108 | static struct fb_videomode __initdata ph320240t_modes[] = { |
| 109 | { |
| 110 | .name = "320x240 @ 60", |
| 111 | .refresh = 60, |
| 112 | .xres = 320, .yres = 240, |
| 113 | .pixclock = KHZ2PICOS(6300), |
| 114 | |
| 115 | .left_margin = 38, .right_margin = 20, |
| 116 | .upper_margin = 15, .lower_margin = 5, |
| 117 | .hsync_len = 30, .vsync_len = 3, |
| 118 | |
| 119 | .sync = 0, |
| 120 | .vmode = FB_VMODE_NONINTERLACED, |
| 121 | }, |
| 122 | }; |
| 123 | |
| 124 | static struct fb_monspecs __initdata atevklcd10x_default_monspecs = { |
| 125 | .manufacturer = "POW", |
| 126 | .monitor = "PH320240T", |
| 127 | .modedb = ph320240t_modes, |
| 128 | .modedb_len = ARRAY_SIZE(ph320240t_modes), |
| 129 | .hfmin = 14400, |
| 130 | .hfmax = 21600, |
| 131 | .vfmin = 50, |
| 132 | .vfmax = 90, |
| 133 | .dclkmax = 6400000, |
| 134 | }; |
| 135 | |
| 136 | static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = { |
| 137 | .default_bpp = 16, |
| 138 | .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, |
| 139 | .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT |
| 140 | | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE |
| 141 | | ATMEL_LCDC_MEMOR_BIG), |
| 142 | .default_monspecs = &atevklcd10x_default_monspecs, |
| 143 | .guard_time = 2, |
| 144 | }; |
| 145 | #endif |
| 146 | |
| 147 | static int __init atevklcd10x_init(void) |
| 148 | { |
| 149 | at32_add_device_ac97c(0, &ac97c0_data); |
| 150 | |
| 151 | at32_add_device_lcdc(0, &atevklcd10x_lcdc_data, |
| 152 | fbmem_start, fbmem_size, 1); |
| 153 | return 0; |
| 154 | } |
| 155 | postcore_initcall(atevklcd10x_init); |