| Kim Kyuwon | 0baf81b | 2009-09-21 22:17:04 -0700 | [diff] [blame] | 1 | /* | 
|  | 2 | * max7359_keypad.c - MAX7359 Key Switch Controller Driver | 
|  | 3 | * | 
|  | 4 | * Copyright (C) 2009 Samsung Electronics | 
|  | 5 | * Kim Kyuwon <q1.kim@samsung.com> | 
|  | 6 | * | 
|  | 7 | * Based on pxa27x_keypad.c | 
|  | 8 | * | 
|  | 9 | * This program is free software; you can redistribute it and/or modify | 
|  | 10 | * it under the terms of the GNU General Public License version 2 as | 
|  | 11 | * published by the Free Software Foundation. | 
|  | 12 | * | 
|  | 13 | * Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5456 | 
|  | 14 | */ | 
|  | 15 |  | 
|  | 16 | #include <linux/module.h> | 
|  | 17 | #include <linux/i2c.h> | 
|  | 18 | #include <linux/interrupt.h> | 
|  | 19 | #include <linux/input.h> | 
|  | 20 | #include <linux/input/matrix_keypad.h> | 
|  | 21 |  | 
|  | 22 | #define MAX7359_MAX_KEY_ROWS	8 | 
|  | 23 | #define MAX7359_MAX_KEY_COLS	8 | 
|  | 24 | #define MAX7359_MAX_KEY_NUM	(MAX7359_MAX_KEY_ROWS * MAX7359_MAX_KEY_COLS) | 
|  | 25 | #define MAX7359_ROW_SHIFT	3 | 
|  | 26 |  | 
|  | 27 | /* | 
|  | 28 | * MAX7359 registers | 
|  | 29 | */ | 
|  | 30 | #define MAX7359_REG_KEYFIFO	0x00 | 
|  | 31 | #define MAX7359_REG_CONFIG	0x01 | 
|  | 32 | #define MAX7359_REG_DEBOUNCE	0x02 | 
|  | 33 | #define MAX7359_REG_INTERRUPT	0x03 | 
|  | 34 | #define MAX7359_REG_PORTS	0x04 | 
|  | 35 | #define MAX7359_REG_KEYREP	0x05 | 
|  | 36 | #define MAX7359_REG_SLEEP	0x06 | 
|  | 37 |  | 
|  | 38 | /* | 
|  | 39 | * Configuration register bits | 
|  | 40 | */ | 
|  | 41 | #define MAX7359_CFG_SLEEP	(1 << 7) | 
|  | 42 | #define MAX7359_CFG_INTERRUPT	(1 << 5) | 
|  | 43 | #define MAX7359_CFG_KEY_RELEASE	(1 << 3) | 
|  | 44 | #define MAX7359_CFG_WAKEUP	(1 << 1) | 
|  | 45 | #define MAX7359_CFG_TIMEOUT	(1 << 0) | 
|  | 46 |  | 
|  | 47 | /* | 
|  | 48 | * Autosleep register values (ms) | 
|  | 49 | */ | 
|  | 50 | #define MAX7359_AUTOSLEEP_8192	0x01 | 
|  | 51 | #define MAX7359_AUTOSLEEP_4096	0x02 | 
|  | 52 | #define MAX7359_AUTOSLEEP_2048	0x03 | 
|  | 53 | #define MAX7359_AUTOSLEEP_1024	0x04 | 
|  | 54 | #define MAX7359_AUTOSLEEP_512	0x05 | 
|  | 55 | #define MAX7359_AUTOSLEEP_256	0x06 | 
|  | 56 |  | 
|  | 57 | struct max7359_keypad { | 
|  | 58 | /* matrix key code map */ | 
|  | 59 | unsigned short keycodes[MAX7359_MAX_KEY_NUM]; | 
|  | 60 |  | 
| Kim Kyuwon | 0baf81b | 2009-09-21 22:17:04 -0700 | [diff] [blame] | 61 | struct input_dev *input_dev; | 
|  | 62 | struct i2c_client *client; | 
| Kim Kyuwon | 0baf81b | 2009-09-21 22:17:04 -0700 | [diff] [blame] | 63 | }; | 
|  | 64 |  | 
|  | 65 | static int max7359_write_reg(struct i2c_client *client, u8 reg, u8 val) | 
|  | 66 | { | 
|  | 67 | int ret = i2c_smbus_write_byte_data(client, reg, val); | 
|  | 68 |  | 
|  | 69 | if (ret < 0) | 
|  | 70 | dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n", | 
|  | 71 | __func__, reg, val, ret); | 
|  | 72 | return ret; | 
|  | 73 | } | 
|  | 74 |  | 
|  | 75 | static int max7359_read_reg(struct i2c_client *client, int reg) | 
|  | 76 | { | 
|  | 77 | int ret = i2c_smbus_read_byte_data(client, reg); | 
|  | 78 |  | 
|  | 79 | if (ret < 0) | 
|  | 80 | dev_err(&client->dev, "%s: reg 0x%x, err %d\n", | 
|  | 81 | __func__, reg, ret); | 
|  | 82 | return ret; | 
|  | 83 | } | 
|  | 84 |  | 
|  | 85 | static void max7359_build_keycode(struct max7359_keypad *keypad, | 
|  | 86 | const struct matrix_keymap_data *keymap_data) | 
|  | 87 | { | 
|  | 88 | struct input_dev *input_dev = keypad->input_dev; | 
|  | 89 | int i; | 
|  | 90 |  | 
|  | 91 | for (i = 0; i < keymap_data->keymap_size; i++) { | 
|  | 92 | unsigned int key = keymap_data->keymap[i]; | 
|  | 93 | unsigned int row = KEY_ROW(key); | 
|  | 94 | unsigned int col = KEY_COL(key); | 
|  | 95 | unsigned int scancode = MATRIX_SCAN_CODE(row, col, | 
|  | 96 | MAX7359_ROW_SHIFT); | 
|  | 97 | unsigned short keycode = KEY_VAL(key); | 
|  | 98 |  | 
|  | 99 | keypad->keycodes[scancode] = keycode; | 
|  | 100 | __set_bit(keycode, input_dev->keybit); | 
|  | 101 | } | 
|  | 102 | __clear_bit(KEY_RESERVED, input_dev->keybit); | 
|  | 103 | } | 
|  | 104 |  | 
| Dmitry Torokhov | 44ca397 | 2009-09-21 22:17:57 -0700 | [diff] [blame] | 105 | /* runs in an IRQ thread -- can (and will!) sleep */ | 
|  | 106 | static irqreturn_t max7359_interrupt(int irq, void *dev_id) | 
| Kim Kyuwon | 0baf81b | 2009-09-21 22:17:04 -0700 | [diff] [blame] | 107 | { | 
| Dmitry Torokhov | 44ca397 | 2009-09-21 22:17:57 -0700 | [diff] [blame] | 108 | struct max7359_keypad *keypad = dev_id; | 
| Kim Kyuwon | 0baf81b | 2009-09-21 22:17:04 -0700 | [diff] [blame] | 109 | struct input_dev *input_dev = keypad->input_dev; | 
|  | 110 | int val, row, col, release, code; | 
|  | 111 |  | 
|  | 112 | val = max7359_read_reg(keypad->client, MAX7359_REG_KEYFIFO); | 
|  | 113 | row = val & 0x7; | 
|  | 114 | col = (val >> 3) & 0x7; | 
|  | 115 | release = val & 0x40; | 
|  | 116 |  | 
|  | 117 | code = MATRIX_SCAN_CODE(row, col, MAX7359_ROW_SHIFT); | 
|  | 118 |  | 
| Dmitry Torokhov | 44ca397 | 2009-09-21 22:17:57 -0700 | [diff] [blame] | 119 | dev_dbg(&keypad->client->dev, | 
|  | 120 | "key[%d:%d] %s\n", row, col, release ? "release" : "press"); | 
|  | 121 |  | 
| Kim Kyuwon | 0baf81b | 2009-09-21 22:17:04 -0700 | [diff] [blame] | 122 | input_event(input_dev, EV_MSC, MSC_SCAN, code); | 
|  | 123 | input_report_key(input_dev, keypad->keycodes[code], !release); | 
|  | 124 | input_sync(input_dev); | 
|  | 125 |  | 
| Kim Kyuwon | 0baf81b | 2009-09-21 22:17:04 -0700 | [diff] [blame] | 126 | return IRQ_HANDLED; | 
|  | 127 | } | 
|  | 128 |  | 
|  | 129 | /* | 
|  | 130 | * Let MAX7359 fall into a deep sleep: | 
|  | 131 | * If no keys are pressed, enter sleep mode for 8192 ms. And if any | 
|  | 132 | * key is pressed, the MAX7359 returns to normal operating mode. | 
|  | 133 | */ | 
|  | 134 | static inline void max7359_fall_deepsleep(struct i2c_client *client) | 
|  | 135 | { | 
|  | 136 | max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_8192); | 
|  | 137 | } | 
|  | 138 |  | 
|  | 139 | /* | 
|  | 140 | * Let MAX7359 take a catnap: | 
|  | 141 | * Autosleep just for 256 ms. | 
|  | 142 | */ | 
|  | 143 | static inline void max7359_take_catnap(struct i2c_client *client) | 
|  | 144 | { | 
|  | 145 | max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_256); | 
|  | 146 | } | 
|  | 147 |  | 
|  | 148 | static int max7359_open(struct input_dev *dev) | 
|  | 149 | { | 
|  | 150 | struct max7359_keypad *keypad = input_get_drvdata(dev); | 
|  | 151 |  | 
|  | 152 | max7359_take_catnap(keypad->client); | 
|  | 153 |  | 
|  | 154 | return 0; | 
|  | 155 | } | 
|  | 156 |  | 
|  | 157 | static void max7359_close(struct input_dev *dev) | 
|  | 158 | { | 
|  | 159 | struct max7359_keypad *keypad = input_get_drvdata(dev); | 
|  | 160 |  | 
|  | 161 | max7359_fall_deepsleep(keypad->client); | 
|  | 162 | } | 
|  | 163 |  | 
|  | 164 | static void max7359_initialize(struct i2c_client *client) | 
|  | 165 | { | 
|  | 166 | max7359_write_reg(client, MAX7359_REG_CONFIG, | 
|  | 167 | MAX7359_CFG_INTERRUPT | /* Irq clears after host read */ | 
|  | 168 | MAX7359_CFG_KEY_RELEASE | /* Key release enable */ | 
|  | 169 | MAX7359_CFG_WAKEUP); /* Key press wakeup enable */ | 
|  | 170 |  | 
|  | 171 | /* Full key-scan functionality */ | 
|  | 172 | max7359_write_reg(client, MAX7359_REG_DEBOUNCE, 0x1F); | 
|  | 173 |  | 
|  | 174 | /* nINT asserts every debounce cycles */ | 
|  | 175 | max7359_write_reg(client, MAX7359_REG_INTERRUPT, 0x01); | 
|  | 176 |  | 
|  | 177 | max7359_fall_deepsleep(client); | 
|  | 178 | } | 
|  | 179 |  | 
|  | 180 | static int __devinit max7359_probe(struct i2c_client *client, | 
|  | 181 | const struct i2c_device_id *id) | 
|  | 182 | { | 
|  | 183 | const struct matrix_keymap_data *keymap_data = client->dev.platform_data; | 
|  | 184 | struct max7359_keypad *keypad; | 
|  | 185 | struct input_dev *input_dev; | 
|  | 186 | int ret; | 
|  | 187 | int error; | 
|  | 188 |  | 
|  | 189 | if (!client->irq) { | 
|  | 190 | dev_err(&client->dev, "The irq number should not be zero\n"); | 
|  | 191 | return -EINVAL; | 
|  | 192 | } | 
|  | 193 |  | 
|  | 194 | /* Detect MAX7359: The initial Keys FIFO value is '0x3F' */ | 
|  | 195 | ret = max7359_read_reg(client, MAX7359_REG_KEYFIFO); | 
|  | 196 | if (ret < 0) { | 
|  | 197 | dev_err(&client->dev, "failed to detect device\n"); | 
|  | 198 | return -ENODEV; | 
|  | 199 | } | 
|  | 200 |  | 
|  | 201 | dev_dbg(&client->dev, "keys FIFO is 0x%02x\n", ret); | 
|  | 202 |  | 
|  | 203 | keypad = kzalloc(sizeof(struct max7359_keypad), GFP_KERNEL); | 
|  | 204 | input_dev = input_allocate_device(); | 
|  | 205 | if (!keypad || !input_dev) { | 
|  | 206 | dev_err(&client->dev, "failed to allocate memory\n"); | 
|  | 207 | error = -ENOMEM; | 
|  | 208 | goto failed_free_mem; | 
|  | 209 | } | 
|  | 210 |  | 
|  | 211 | keypad->client = client; | 
|  | 212 | keypad->input_dev = input_dev; | 
| Kim Kyuwon | 0baf81b | 2009-09-21 22:17:04 -0700 | [diff] [blame] | 213 |  | 
|  | 214 | input_dev->name = client->name; | 
|  | 215 | input_dev->id.bustype = BUS_I2C; | 
|  | 216 | input_dev->open = max7359_open; | 
|  | 217 | input_dev->close = max7359_close; | 
|  | 218 | input_dev->dev.parent = &client->dev; | 
|  | 219 |  | 
|  | 220 | input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); | 
|  | 221 | input_dev->keycodesize = sizeof(keypad->keycodes[0]); | 
|  | 222 | input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes); | 
|  | 223 | input_dev->keycode = keypad->keycodes; | 
|  | 224 |  | 
|  | 225 | input_set_capability(input_dev, EV_MSC, MSC_SCAN); | 
|  | 226 | input_set_drvdata(input_dev, keypad); | 
|  | 227 |  | 
|  | 228 | max7359_build_keycode(keypad, keymap_data); | 
|  | 229 |  | 
| Dmitry Torokhov | 44ca397 | 2009-09-21 22:17:57 -0700 | [diff] [blame] | 230 | error = request_threaded_irq(client->irq, NULL, max7359_interrupt, | 
|  | 231 | IRQF_TRIGGER_LOW | IRQF_ONESHOT, | 
|  | 232 | client->name, keypad); | 
| Kim Kyuwon | 0baf81b | 2009-09-21 22:17:04 -0700 | [diff] [blame] | 233 | if (error) { | 
|  | 234 | dev_err(&client->dev, "failed to register interrupt\n"); | 
|  | 235 | goto failed_free_mem; | 
|  | 236 | } | 
|  | 237 |  | 
|  | 238 | /* Register the input device */ | 
|  | 239 | error = input_register_device(input_dev); | 
|  | 240 | if (error) { | 
|  | 241 | dev_err(&client->dev, "failed to register input device\n"); | 
|  | 242 | goto failed_free_irq; | 
|  | 243 | } | 
|  | 244 |  | 
|  | 245 | /* Initialize MAX7359 */ | 
|  | 246 | max7359_initialize(client); | 
|  | 247 |  | 
|  | 248 | i2c_set_clientdata(client, keypad); | 
|  | 249 | device_init_wakeup(&client->dev, 1); | 
|  | 250 |  | 
|  | 251 | return 0; | 
|  | 252 |  | 
|  | 253 | failed_free_irq: | 
| Dmitry Torokhov | 44ca397 | 2009-09-21 22:17:57 -0700 | [diff] [blame] | 254 | free_irq(client->irq, keypad); | 
| Kim Kyuwon | 0baf81b | 2009-09-21 22:17:04 -0700 | [diff] [blame] | 255 | failed_free_mem: | 
|  | 256 | input_free_device(input_dev); | 
|  | 257 | kfree(keypad); | 
|  | 258 | return error; | 
|  | 259 | } | 
|  | 260 |  | 
|  | 261 | static int __devexit max7359_remove(struct i2c_client *client) | 
|  | 262 | { | 
|  | 263 | struct max7359_keypad *keypad = i2c_get_clientdata(client); | 
|  | 264 |  | 
| Dmitry Torokhov | 44ca397 | 2009-09-21 22:17:57 -0700 | [diff] [blame] | 265 | free_irq(client->irq, keypad); | 
| Kim Kyuwon | 0baf81b | 2009-09-21 22:17:04 -0700 | [diff] [blame] | 266 | input_unregister_device(keypad->input_dev); | 
| Kim Kyuwon | 0baf81b | 2009-09-21 22:17:04 -0700 | [diff] [blame] | 267 | i2c_set_clientdata(client, NULL); | 
|  | 268 | kfree(keypad); | 
|  | 269 |  | 
|  | 270 | return 0; | 
|  | 271 | } | 
|  | 272 |  | 
|  | 273 | #ifdef CONFIG_PM | 
|  | 274 | static int max7359_suspend(struct i2c_client *client, pm_message_t mesg) | 
|  | 275 | { | 
| Kim Kyuwon | 0baf81b | 2009-09-21 22:17:04 -0700 | [diff] [blame] | 276 | max7359_fall_deepsleep(client); | 
|  | 277 |  | 
|  | 278 | if (device_may_wakeup(&client->dev)) | 
| Dmitry Torokhov | 44ca397 | 2009-09-21 22:17:57 -0700 | [diff] [blame] | 279 | enable_irq_wake(client->irq); | 
| Kim Kyuwon | 0baf81b | 2009-09-21 22:17:04 -0700 | [diff] [blame] | 280 |  | 
|  | 281 | return 0; | 
|  | 282 | } | 
|  | 283 |  | 
|  | 284 | static int max7359_resume(struct i2c_client *client) | 
|  | 285 | { | 
| Kim Kyuwon | 0baf81b | 2009-09-21 22:17:04 -0700 | [diff] [blame] | 286 | if (device_may_wakeup(&client->dev)) | 
| Dmitry Torokhov | 44ca397 | 2009-09-21 22:17:57 -0700 | [diff] [blame] | 287 | disable_irq_wake(client->irq); | 
| Kim Kyuwon | 0baf81b | 2009-09-21 22:17:04 -0700 | [diff] [blame] | 288 |  | 
|  | 289 | /* Restore the default setting */ | 
|  | 290 | max7359_take_catnap(client); | 
|  | 291 |  | 
|  | 292 | return 0; | 
|  | 293 | } | 
|  | 294 | #else | 
|  | 295 | #define max7359_suspend	NULL | 
|  | 296 | #define max7359_resume	NULL | 
|  | 297 | #endif | 
|  | 298 |  | 
|  | 299 | static const struct i2c_device_id max7359_ids[] = { | 
|  | 300 | { "max7359", 0 }, | 
|  | 301 | { } | 
|  | 302 | }; | 
|  | 303 | MODULE_DEVICE_TABLE(i2c, max7359_ids); | 
|  | 304 |  | 
|  | 305 | static struct i2c_driver max7359_i2c_driver = { | 
|  | 306 | .driver = { | 
|  | 307 | .name = "max7359", | 
|  | 308 | }, | 
|  | 309 | .probe		= max7359_probe, | 
|  | 310 | .remove		= __devexit_p(max7359_remove), | 
|  | 311 | .suspend	= max7359_suspend, | 
|  | 312 | .resume		= max7359_resume, | 
|  | 313 | .id_table	= max7359_ids, | 
|  | 314 | }; | 
|  | 315 |  | 
|  | 316 | static int __init max7359_init(void) | 
|  | 317 | { | 
|  | 318 | return i2c_add_driver(&max7359_i2c_driver); | 
|  | 319 | } | 
|  | 320 | module_init(max7359_init); | 
|  | 321 |  | 
|  | 322 | static void __exit max7359_exit(void) | 
|  | 323 | { | 
|  | 324 | i2c_del_driver(&max7359_i2c_driver); | 
|  | 325 | } | 
|  | 326 | module_exit(max7359_exit); | 
|  | 327 |  | 
|  | 328 | MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>"); | 
|  | 329 | MODULE_DESCRIPTION("MAX7359 Key Switch Controller Driver"); | 
|  | 330 | MODULE_LICENSE("GPL v2"); |