| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* | 
|  | 2 | * INET		802.1Q VLAN | 
|  | 3 | *		Ethernet-type device handling. | 
|  | 4 | * | 
|  | 5 | * Authors:	Ben Greear <greearb@candelatech.com> | 
|  | 6 | *              Please send support related email to: vlan@scry.wanfear.com | 
|  | 7 | *              VLAN Home Page: http://www.candelatech.com/~greear/vlan.html | 
|  | 8 | * | 
|  | 9 | * Fixes: | 
|  | 10 | *              Fix for packet capture - Nick Eggleston <nick@dccinc.com>; | 
|  | 11 | *		Add HW acceleration hooks - David S. Miller <davem@redhat.com>; | 
|  | 12 | *		Correct all the locking - David S. Miller <davem@redhat.com>; | 
|  | 13 | *		Use hash table for VLAN groups - David S. Miller <davem@redhat.com> | 
|  | 14 | * | 
|  | 15 | *		This program is free software; you can redistribute it and/or | 
|  | 16 | *		modify it under the terms of the GNU General Public License | 
|  | 17 | *		as published by the Free Software Foundation; either version | 
|  | 18 | *		2 of the License, or (at your option) any later version. | 
|  | 19 | */ | 
|  | 20 |  | 
|  | 21 | #include <asm/uaccess.h> /* for copy_from_user */ | 
|  | 22 | #include <linux/module.h> | 
|  | 23 | #include <linux/netdevice.h> | 
|  | 24 | #include <linux/skbuff.h> | 
|  | 25 | #include <net/datalink.h> | 
|  | 26 | #include <linux/mm.h> | 
|  | 27 | #include <linux/in.h> | 
|  | 28 | #include <linux/init.h> | 
|  | 29 | #include <net/p8022.h> | 
|  | 30 | #include <net/arp.h> | 
|  | 31 | #include <linux/rtnetlink.h> | 
|  | 32 | #include <linux/notifier.h> | 
|  | 33 |  | 
|  | 34 | #include <linux/if_vlan.h> | 
|  | 35 | #include "vlan.h" | 
|  | 36 | #include "vlanproc.h" | 
|  | 37 |  | 
|  | 38 | #define DRV_VERSION "1.8" | 
|  | 39 |  | 
|  | 40 | /* Global VLAN variables */ | 
|  | 41 |  | 
|  | 42 | /* Our listing of VLAN group(s) */ | 
|  | 43 | static struct hlist_head vlan_group_hash[VLAN_GRP_HASH_SIZE]; | 
|  | 44 | #define vlan_grp_hashfn(IDX)	((((IDX) >> VLAN_GRP_HASH_SHIFT) ^ (IDX)) & VLAN_GRP_HASH_MASK) | 
|  | 45 |  | 
|  | 46 | static char vlan_fullname[] = "802.1Q VLAN Support"; | 
|  | 47 | static char vlan_version[] = DRV_VERSION; | 
|  | 48 | static char vlan_copyright[] = "Ben Greear <greearb@candelatech.com>"; | 
|  | 49 | static char vlan_buggyright[] = "David S. Miller <davem@redhat.com>"; | 
|  | 50 |  | 
|  | 51 | static int vlan_device_event(struct notifier_block *, unsigned long, void *); | 
|  | 52 | static int vlan_ioctl_handler(void __user *); | 
|  | 53 | static int unregister_vlan_dev(struct net_device *, unsigned short ); | 
|  | 54 |  | 
|  | 55 | static struct notifier_block vlan_notifier_block = { | 
|  | 56 | .notifier_call = vlan_device_event, | 
|  | 57 | }; | 
|  | 58 |  | 
|  | 59 | /* These may be changed at run-time through IOCTLs */ | 
|  | 60 |  | 
|  | 61 | /* Determines interface naming scheme. */ | 
|  | 62 | unsigned short vlan_name_type = VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD; | 
|  | 63 |  | 
|  | 64 | static struct packet_type vlan_packet_type = { | 
|  | 65 | .type = __constant_htons(ETH_P_8021Q), | 
|  | 66 | .func = vlan_skb_recv, /* VLAN receive method */ | 
|  | 67 | }; | 
|  | 68 |  | 
|  | 69 | /* Bits of netdev state that are propagated from real device to virtual */ | 
|  | 70 | #define VLAN_LINK_STATE_MASK \ | 
|  | 71 | ((1<<__LINK_STATE_PRESENT)|(1<<__LINK_STATE_NOCARRIER)) | 
|  | 72 |  | 
|  | 73 | /* End of global variables definitions. */ | 
|  | 74 |  | 
|  | 75 | /* | 
|  | 76 | * Function vlan_proto_init (pro) | 
|  | 77 | * | 
|  | 78 | *    Initialize VLAN protocol layer, | 
|  | 79 | * | 
|  | 80 | */ | 
|  | 81 | static int __init vlan_proto_init(void) | 
|  | 82 | { | 
|  | 83 | int err; | 
|  | 84 |  | 
|  | 85 | printk(VLAN_INF "%s v%s %s\n", | 
|  | 86 | vlan_fullname, vlan_version, vlan_copyright); | 
|  | 87 | printk(VLAN_INF "All bugs added by %s\n", | 
|  | 88 | vlan_buggyright); | 
|  | 89 |  | 
|  | 90 | /* proc file system initialization */ | 
|  | 91 | err = vlan_proc_init(); | 
|  | 92 | if (err < 0) { | 
|  | 93 | printk(KERN_ERR | 
|  | 94 | "%s %s: can't create entry in proc filesystem!\n", | 
|  | 95 | __FUNCTION__, VLAN_NAME); | 
|  | 96 | return err; | 
|  | 97 | } | 
|  | 98 |  | 
|  | 99 | dev_add_pack(&vlan_packet_type); | 
|  | 100 |  | 
|  | 101 | /* Register us to receive netdevice events */ | 
|  | 102 | err = register_netdevice_notifier(&vlan_notifier_block); | 
|  | 103 | if (err < 0) { | 
|  | 104 | dev_remove_pack(&vlan_packet_type); | 
|  | 105 | vlan_proc_cleanup(); | 
|  | 106 | return err; | 
|  | 107 | } | 
|  | 108 |  | 
|  | 109 | vlan_ioctl_set(vlan_ioctl_handler); | 
|  | 110 |  | 
|  | 111 | return 0; | 
|  | 112 | } | 
|  | 113 |  | 
|  | 114 | /* Cleanup all vlan devices | 
|  | 115 | * Note: devices that have been registered that but not | 
|  | 116 | * brought up will exist but have no module ref count. | 
|  | 117 | */ | 
|  | 118 | static void __exit vlan_cleanup_devices(void) | 
|  | 119 | { | 
|  | 120 | struct net_device *dev, *nxt; | 
|  | 121 |  | 
|  | 122 | rtnl_lock(); | 
|  | 123 | for (dev = dev_base; dev; dev = nxt) { | 
|  | 124 | nxt = dev->next; | 
|  | 125 | if (dev->priv_flags & IFF_802_1Q_VLAN) { | 
|  | 126 | unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev, | 
|  | 127 | VLAN_DEV_INFO(dev)->vlan_id); | 
|  | 128 |  | 
|  | 129 | unregister_netdevice(dev); | 
|  | 130 | } | 
|  | 131 | } | 
|  | 132 | rtnl_unlock(); | 
|  | 133 | } | 
|  | 134 |  | 
|  | 135 | /* | 
|  | 136 | *     Module 'remove' entry point. | 
|  | 137 | *     o delete /proc/net/router directory and static entries. | 
|  | 138 | */ | 
|  | 139 | static void __exit vlan_cleanup_module(void) | 
|  | 140 | { | 
|  | 141 | int i; | 
|  | 142 |  | 
|  | 143 | vlan_ioctl_set(NULL); | 
|  | 144 |  | 
|  | 145 | /* Un-register us from receiving netdevice events */ | 
|  | 146 | unregister_netdevice_notifier(&vlan_notifier_block); | 
|  | 147 |  | 
|  | 148 | dev_remove_pack(&vlan_packet_type); | 
|  | 149 | vlan_cleanup_devices(); | 
|  | 150 |  | 
|  | 151 | /* This table must be empty if there are no module | 
|  | 152 | * references left. | 
|  | 153 | */ | 
|  | 154 | for (i = 0; i < VLAN_GRP_HASH_SIZE; i++) { | 
|  | 155 | BUG_ON(!hlist_empty(&vlan_group_hash[i])); | 
|  | 156 | } | 
|  | 157 | vlan_proc_cleanup(); | 
|  | 158 |  | 
|  | 159 | synchronize_net(); | 
|  | 160 | } | 
|  | 161 |  | 
|  | 162 | module_init(vlan_proto_init); | 
|  | 163 | module_exit(vlan_cleanup_module); | 
|  | 164 |  | 
|  | 165 | /* Must be invoked with RCU read lock (no preempt) */ | 
|  | 166 | static struct vlan_group *__vlan_find_group(int real_dev_ifindex) | 
|  | 167 | { | 
|  | 168 | struct vlan_group *grp; | 
|  | 169 | struct hlist_node *n; | 
|  | 170 | int hash = vlan_grp_hashfn(real_dev_ifindex); | 
|  | 171 |  | 
|  | 172 | hlist_for_each_entry_rcu(grp, n, &vlan_group_hash[hash], hlist) { | 
|  | 173 | if (grp->real_dev_ifindex == real_dev_ifindex) | 
|  | 174 | return grp; | 
|  | 175 | } | 
|  | 176 |  | 
|  | 177 | return NULL; | 
|  | 178 | } | 
|  | 179 |  | 
|  | 180 | /*  Find the protocol handler.  Assumes VID < VLAN_VID_MASK. | 
|  | 181 | * | 
|  | 182 | * Must be invoked with RCU read lock (no preempt) | 
|  | 183 | */ | 
|  | 184 | struct net_device *__find_vlan_dev(struct net_device *real_dev, | 
|  | 185 | unsigned short VID) | 
|  | 186 | { | 
|  | 187 | struct vlan_group *grp = __vlan_find_group(real_dev->ifindex); | 
|  | 188 |  | 
|  | 189 | if (grp) | 
|  | 190 | return grp->vlan_devices[VID]; | 
|  | 191 |  | 
|  | 192 | return NULL; | 
|  | 193 | } | 
|  | 194 |  | 
|  | 195 | static void vlan_rcu_free(struct rcu_head *rcu) | 
|  | 196 | { | 
|  | 197 | kfree(container_of(rcu, struct vlan_group, rcu)); | 
|  | 198 | } | 
|  | 199 |  | 
|  | 200 |  | 
|  | 201 | /* This returns 0 if everything went fine. | 
|  | 202 | * It will return 1 if the group was killed as a result. | 
|  | 203 | * A negative return indicates failure. | 
|  | 204 | * | 
|  | 205 | * The RTNL lock must be held. | 
|  | 206 | */ | 
|  | 207 | static int unregister_vlan_dev(struct net_device *real_dev, | 
|  | 208 | unsigned short vlan_id) | 
|  | 209 | { | 
|  | 210 | struct net_device *dev = NULL; | 
|  | 211 | int real_dev_ifindex = real_dev->ifindex; | 
|  | 212 | struct vlan_group *grp; | 
|  | 213 | int i, ret; | 
|  | 214 |  | 
|  | 215 | #ifdef VLAN_DEBUG | 
|  | 216 | printk(VLAN_DBG "%s: VID: %i\n", __FUNCTION__, vlan_id); | 
|  | 217 | #endif | 
|  | 218 |  | 
|  | 219 | /* sanity check */ | 
|  | 220 | if (vlan_id >= VLAN_VID_MASK) | 
|  | 221 | return -EINVAL; | 
|  | 222 |  | 
|  | 223 | ASSERT_RTNL(); | 
|  | 224 | grp = __vlan_find_group(real_dev_ifindex); | 
|  | 225 |  | 
|  | 226 | ret = 0; | 
|  | 227 |  | 
|  | 228 | if (grp) { | 
|  | 229 | dev = grp->vlan_devices[vlan_id]; | 
|  | 230 | if (dev) { | 
|  | 231 | /* Remove proc entry */ | 
|  | 232 | vlan_proc_rem_dev(dev); | 
|  | 233 |  | 
|  | 234 | /* Take it out of our own structures, but be sure to | 
|  | 235 | * interlock with HW accelerating devices or SW vlan | 
|  | 236 | * input packet processing. | 
|  | 237 | */ | 
|  | 238 | if (real_dev->features & | 
|  | 239 | (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER)) { | 
|  | 240 | real_dev->vlan_rx_kill_vid(real_dev, vlan_id); | 
|  | 241 | } | 
|  | 242 |  | 
|  | 243 | grp->vlan_devices[vlan_id] = NULL; | 
|  | 244 | synchronize_net(); | 
|  | 245 |  | 
|  | 246 |  | 
|  | 247 | /* Caller unregisters (and if necessary, puts) | 
|  | 248 | * VLAN device, but we get rid of the reference to | 
|  | 249 | * real_dev here. | 
|  | 250 | */ | 
|  | 251 | dev_put(real_dev); | 
|  | 252 |  | 
|  | 253 | /* If the group is now empty, kill off the | 
|  | 254 | * group. | 
|  | 255 | */ | 
|  | 256 | for (i = 0; i < VLAN_VID_MASK; i++) | 
|  | 257 | if (grp->vlan_devices[i]) | 
|  | 258 | break; | 
|  | 259 |  | 
|  | 260 | if (i == VLAN_VID_MASK) { | 
|  | 261 | if (real_dev->features & NETIF_F_HW_VLAN_RX) | 
|  | 262 | real_dev->vlan_rx_register(real_dev, NULL); | 
|  | 263 |  | 
|  | 264 | hlist_del_rcu(&grp->hlist); | 
|  | 265 |  | 
|  | 266 | /* Free the group, after all cpu's are done. */ | 
|  | 267 | call_rcu(&grp->rcu, vlan_rcu_free); | 
|  | 268 |  | 
|  | 269 | grp = NULL; | 
|  | 270 | ret = 1; | 
|  | 271 | } | 
|  | 272 | } | 
|  | 273 | } | 
|  | 274 |  | 
|  | 275 | return ret; | 
|  | 276 | } | 
|  | 277 |  | 
|  | 278 | static int unregister_vlan_device(const char *vlan_IF_name) | 
|  | 279 | { | 
|  | 280 | struct net_device *dev = NULL; | 
|  | 281 | int ret; | 
|  | 282 |  | 
|  | 283 |  | 
|  | 284 | dev = dev_get_by_name(vlan_IF_name); | 
|  | 285 | ret = -EINVAL; | 
|  | 286 | if (dev) { | 
|  | 287 | if (dev->priv_flags & IFF_802_1Q_VLAN) { | 
|  | 288 | rtnl_lock(); | 
|  | 289 |  | 
|  | 290 | ret = unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev, | 
|  | 291 | VLAN_DEV_INFO(dev)->vlan_id); | 
|  | 292 |  | 
|  | 293 | dev_put(dev); | 
|  | 294 | unregister_netdevice(dev); | 
|  | 295 |  | 
|  | 296 | rtnl_unlock(); | 
|  | 297 |  | 
|  | 298 | if (ret == 1) | 
|  | 299 | ret = 0; | 
|  | 300 | } else { | 
|  | 301 | printk(VLAN_ERR | 
|  | 302 | "%s: ERROR:	Tried to remove a non-vlan device " | 
|  | 303 | "with VLAN code, name: %s  priv_flags: %hX\n", | 
|  | 304 | __FUNCTION__, dev->name, dev->priv_flags); | 
|  | 305 | dev_put(dev); | 
|  | 306 | ret = -EPERM; | 
|  | 307 | } | 
|  | 308 | } else { | 
|  | 309 | #ifdef VLAN_DEBUG | 
|  | 310 | printk(VLAN_DBG "%s: WARNING: Could not find dev.\n", __FUNCTION__); | 
|  | 311 | #endif | 
|  | 312 | ret = -EINVAL; | 
|  | 313 | } | 
|  | 314 |  | 
|  | 315 | return ret; | 
|  | 316 | } | 
|  | 317 |  | 
|  | 318 | static void vlan_setup(struct net_device *new_dev) | 
|  | 319 | { | 
|  | 320 | SET_MODULE_OWNER(new_dev); | 
|  | 321 |  | 
|  | 322 | /* new_dev->ifindex = 0;  it will be set when added to | 
|  | 323 | * the global list. | 
|  | 324 | * iflink is set as well. | 
|  | 325 | */ | 
|  | 326 | new_dev->get_stats = vlan_dev_get_stats; | 
|  | 327 |  | 
|  | 328 | /* Make this thing known as a VLAN device */ | 
|  | 329 | new_dev->priv_flags |= IFF_802_1Q_VLAN; | 
|  | 330 |  | 
|  | 331 | /* Set us up to have no queue, as the underlying Hardware device | 
|  | 332 | * can do all the queueing we could want. | 
|  | 333 | */ | 
|  | 334 | new_dev->tx_queue_len = 0; | 
|  | 335 |  | 
|  | 336 | /* set up method calls */ | 
|  | 337 | new_dev->change_mtu = vlan_dev_change_mtu; | 
|  | 338 | new_dev->open = vlan_dev_open; | 
|  | 339 | new_dev->stop = vlan_dev_stop; | 
|  | 340 | new_dev->set_mac_address = vlan_dev_set_mac_address; | 
|  | 341 | new_dev->set_multicast_list = vlan_dev_set_multicast_list; | 
|  | 342 | new_dev->destructor = free_netdev; | 
|  | 343 | new_dev->do_ioctl = vlan_dev_ioctl; | 
|  | 344 | } | 
|  | 345 |  | 
|  | 346 | /*  Attach a VLAN device to a mac address (ie Ethernet Card). | 
|  | 347 | *  Returns the device that was created, or NULL if there was | 
|  | 348 | *  an error of some kind. | 
|  | 349 | */ | 
|  | 350 | static struct net_device *register_vlan_device(const char *eth_IF_name, | 
|  | 351 | unsigned short VLAN_ID) | 
|  | 352 | { | 
|  | 353 | struct vlan_group *grp; | 
|  | 354 | struct net_device *new_dev; | 
|  | 355 | struct net_device *real_dev; /* the ethernet device */ | 
|  | 356 | char name[IFNAMSIZ]; | 
|  | 357 |  | 
|  | 358 | #ifdef VLAN_DEBUG | 
|  | 359 | printk(VLAN_DBG "%s: if_name -:%s:-	vid: %i\n", | 
|  | 360 | __FUNCTION__, eth_IF_name, VLAN_ID); | 
|  | 361 | #endif | 
|  | 362 |  | 
|  | 363 | if (VLAN_ID >= VLAN_VID_MASK) | 
|  | 364 | goto out_ret_null; | 
|  | 365 |  | 
|  | 366 | /* find the device relating to eth_IF_name. */ | 
|  | 367 | real_dev = dev_get_by_name(eth_IF_name); | 
|  | 368 | if (!real_dev) | 
|  | 369 | goto out_ret_null; | 
|  | 370 |  | 
|  | 371 | if (real_dev->features & NETIF_F_VLAN_CHALLENGED) { | 
|  | 372 | printk(VLAN_DBG "%s: VLANs not supported on %s.\n", | 
|  | 373 | __FUNCTION__, real_dev->name); | 
|  | 374 | goto out_put_dev; | 
|  | 375 | } | 
|  | 376 |  | 
|  | 377 | if ((real_dev->features & NETIF_F_HW_VLAN_RX) && | 
|  | 378 | (real_dev->vlan_rx_register == NULL || | 
|  | 379 | real_dev->vlan_rx_kill_vid == NULL)) { | 
|  | 380 | printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n", | 
|  | 381 | __FUNCTION__, real_dev->name); | 
|  | 382 | goto out_put_dev; | 
|  | 383 | } | 
|  | 384 |  | 
|  | 385 | if ((real_dev->features & NETIF_F_HW_VLAN_FILTER) && | 
|  | 386 | (real_dev->vlan_rx_add_vid == NULL || | 
|  | 387 | real_dev->vlan_rx_kill_vid == NULL)) { | 
|  | 388 | printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n", | 
|  | 389 | __FUNCTION__, real_dev->name); | 
|  | 390 | goto out_put_dev; | 
|  | 391 | } | 
|  | 392 |  | 
|  | 393 | /* From this point on, all the data structures must remain | 
|  | 394 | * consistent. | 
|  | 395 | */ | 
|  | 396 | rtnl_lock(); | 
|  | 397 |  | 
|  | 398 | /* The real device must be up and operating in order to | 
|  | 399 | * assosciate a VLAN device with it. | 
|  | 400 | */ | 
|  | 401 | if (!(real_dev->flags & IFF_UP)) | 
|  | 402 | goto out_unlock; | 
|  | 403 |  | 
|  | 404 | if (__find_vlan_dev(real_dev, VLAN_ID) != NULL) { | 
|  | 405 | /* was already registered. */ | 
|  | 406 | printk(VLAN_DBG "%s: ALREADY had VLAN registered\n", __FUNCTION__); | 
|  | 407 | goto out_unlock; | 
|  | 408 | } | 
|  | 409 |  | 
|  | 410 | /* Gotta set up the fields for the device. */ | 
|  | 411 | #ifdef VLAN_DEBUG | 
|  | 412 | printk(VLAN_DBG "About to allocate name, vlan_name_type: %i\n", | 
|  | 413 | vlan_name_type); | 
|  | 414 | #endif | 
|  | 415 | switch (vlan_name_type) { | 
|  | 416 | case VLAN_NAME_TYPE_RAW_PLUS_VID: | 
|  | 417 | /* name will look like:	 eth1.0005 */ | 
|  | 418 | snprintf(name, IFNAMSIZ, "%s.%.4i", real_dev->name, VLAN_ID); | 
|  | 419 | break; | 
|  | 420 | case VLAN_NAME_TYPE_PLUS_VID_NO_PAD: | 
|  | 421 | /* Put our vlan.VID in the name. | 
|  | 422 | * Name will look like:	 vlan5 | 
|  | 423 | */ | 
|  | 424 | snprintf(name, IFNAMSIZ, "vlan%i", VLAN_ID); | 
|  | 425 | break; | 
|  | 426 | case VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD: | 
|  | 427 | /* Put our vlan.VID in the name. | 
|  | 428 | * Name will look like:	 eth0.5 | 
|  | 429 | */ | 
|  | 430 | snprintf(name, IFNAMSIZ, "%s.%i", real_dev->name, VLAN_ID); | 
|  | 431 | break; | 
|  | 432 | case VLAN_NAME_TYPE_PLUS_VID: | 
|  | 433 | /* Put our vlan.VID in the name. | 
|  | 434 | * Name will look like:	 vlan0005 | 
|  | 435 | */ | 
|  | 436 | default: | 
|  | 437 | snprintf(name, IFNAMSIZ, "vlan%.4i", VLAN_ID); | 
|  | 438 | }; | 
|  | 439 |  | 
|  | 440 | new_dev = alloc_netdev(sizeof(struct vlan_dev_info), name, | 
|  | 441 | vlan_setup); | 
|  | 442 | if (new_dev == NULL) | 
|  | 443 | goto out_unlock; | 
|  | 444 |  | 
|  | 445 | #ifdef VLAN_DEBUG | 
|  | 446 | printk(VLAN_DBG "Allocated new name -:%s:-\n", new_dev->name); | 
|  | 447 | #endif | 
|  | 448 | /* IFF_BROADCAST|IFF_MULTICAST; ??? */ | 
|  | 449 | new_dev->flags = real_dev->flags; | 
|  | 450 | new_dev->flags &= ~IFF_UP; | 
|  | 451 |  | 
|  | 452 | new_dev->state = real_dev->state & VLAN_LINK_STATE_MASK; | 
|  | 453 |  | 
|  | 454 | /* need 4 bytes for extra VLAN header info, | 
|  | 455 | * hope the underlying device can handle it. | 
|  | 456 | */ | 
|  | 457 | new_dev->mtu = real_dev->mtu; | 
|  | 458 |  | 
|  | 459 | /* TODO: maybe just assign it to be ETHERNET? */ | 
|  | 460 | new_dev->type = real_dev->type; | 
|  | 461 |  | 
|  | 462 | new_dev->hard_header_len = real_dev->hard_header_len; | 
|  | 463 | if (!(real_dev->features & NETIF_F_HW_VLAN_TX)) { | 
|  | 464 | /* Regular ethernet + 4 bytes (18 total). */ | 
|  | 465 | new_dev->hard_header_len += VLAN_HLEN; | 
|  | 466 | } | 
|  | 467 |  | 
|  | 468 | VLAN_MEM_DBG("new_dev->priv malloc, addr: %p  size: %i\n", | 
|  | 469 | new_dev->priv, | 
|  | 470 | sizeof(struct vlan_dev_info)); | 
|  | 471 |  | 
|  | 472 | memcpy(new_dev->broadcast, real_dev->broadcast, real_dev->addr_len); | 
|  | 473 | memcpy(new_dev->dev_addr, real_dev->dev_addr, real_dev->addr_len); | 
|  | 474 | new_dev->addr_len = real_dev->addr_len; | 
|  | 475 |  | 
|  | 476 | if (real_dev->features & NETIF_F_HW_VLAN_TX) { | 
|  | 477 | new_dev->hard_header = real_dev->hard_header; | 
|  | 478 | new_dev->hard_start_xmit = vlan_dev_hwaccel_hard_start_xmit; | 
|  | 479 | new_dev->rebuild_header = real_dev->rebuild_header; | 
|  | 480 | } else { | 
|  | 481 | new_dev->hard_header = vlan_dev_hard_header; | 
|  | 482 | new_dev->hard_start_xmit = vlan_dev_hard_start_xmit; | 
|  | 483 | new_dev->rebuild_header = vlan_dev_rebuild_header; | 
|  | 484 | } | 
|  | 485 | new_dev->hard_header_parse = real_dev->hard_header_parse; | 
|  | 486 |  | 
|  | 487 | VLAN_DEV_INFO(new_dev)->vlan_id = VLAN_ID; /* 1 through VLAN_VID_MASK */ | 
|  | 488 | VLAN_DEV_INFO(new_dev)->real_dev = real_dev; | 
|  | 489 | VLAN_DEV_INFO(new_dev)->dent = NULL; | 
|  | 490 | VLAN_DEV_INFO(new_dev)->flags = 1; | 
|  | 491 |  | 
|  | 492 | #ifdef VLAN_DEBUG | 
|  | 493 | printk(VLAN_DBG "About to go find the group for idx: %i\n", | 
|  | 494 | real_dev->ifindex); | 
|  | 495 | #endif | 
|  | 496 |  | 
|  | 497 | if (register_netdevice(new_dev)) | 
|  | 498 | goto out_free_newdev; | 
|  | 499 |  | 
|  | 500 | /* So, got the sucker initialized, now lets place | 
|  | 501 | * it into our local structure. | 
|  | 502 | */ | 
|  | 503 | grp = __vlan_find_group(real_dev->ifindex); | 
|  | 504 |  | 
|  | 505 | /* Note, we are running under the RTNL semaphore | 
|  | 506 | * so it cannot "appear" on us. | 
|  | 507 | */ | 
|  | 508 | if (!grp) { /* need to add a new group */ | 
|  | 509 | grp = kmalloc(sizeof(struct vlan_group), GFP_KERNEL); | 
|  | 510 | if (!grp) | 
|  | 511 | goto out_free_unregister; | 
|  | 512 |  | 
|  | 513 | /* printk(KERN_ALERT "VLAN REGISTER:  Allocated new group.\n"); */ | 
|  | 514 | memset(grp, 0, sizeof(struct vlan_group)); | 
|  | 515 | grp->real_dev_ifindex = real_dev->ifindex; | 
|  | 516 |  | 
|  | 517 | hlist_add_head_rcu(&grp->hlist, | 
|  | 518 | &vlan_group_hash[vlan_grp_hashfn(real_dev->ifindex)]); | 
|  | 519 |  | 
|  | 520 | if (real_dev->features & NETIF_F_HW_VLAN_RX) | 
|  | 521 | real_dev->vlan_rx_register(real_dev, grp); | 
|  | 522 | } | 
|  | 523 |  | 
|  | 524 | grp->vlan_devices[VLAN_ID] = new_dev; | 
|  | 525 |  | 
|  | 526 | if (vlan_proc_add_dev(new_dev)<0)/* create it's proc entry */ | 
|  | 527 | printk(KERN_WARNING "VLAN: failed to add proc entry for %s\n", | 
|  | 528 | new_dev->name); | 
|  | 529 |  | 
|  | 530 | if (real_dev->features & NETIF_F_HW_VLAN_FILTER) | 
|  | 531 | real_dev->vlan_rx_add_vid(real_dev, VLAN_ID); | 
|  | 532 |  | 
|  | 533 | rtnl_unlock(); | 
|  | 534 |  | 
|  | 535 |  | 
|  | 536 | #ifdef VLAN_DEBUG | 
|  | 537 | printk(VLAN_DBG "Allocated new device successfully, returning.\n"); | 
|  | 538 | #endif | 
|  | 539 | return new_dev; | 
|  | 540 |  | 
|  | 541 | out_free_unregister: | 
|  | 542 | unregister_netdev(new_dev); | 
|  | 543 | goto out_unlock; | 
|  | 544 |  | 
|  | 545 | out_free_newdev: | 
|  | 546 | free_netdev(new_dev); | 
|  | 547 |  | 
|  | 548 | out_unlock: | 
|  | 549 | rtnl_unlock(); | 
|  | 550 |  | 
|  | 551 | out_put_dev: | 
|  | 552 | dev_put(real_dev); | 
|  | 553 |  | 
|  | 554 | out_ret_null: | 
|  | 555 | return NULL; | 
|  | 556 | } | 
|  | 557 |  | 
|  | 558 | static int vlan_device_event(struct notifier_block *unused, unsigned long event, void *ptr) | 
|  | 559 | { | 
|  | 560 | struct net_device *dev = ptr; | 
|  | 561 | struct vlan_group *grp = __vlan_find_group(dev->ifindex); | 
|  | 562 | int i, flgs; | 
|  | 563 | struct net_device *vlandev; | 
|  | 564 |  | 
|  | 565 | if (!grp) | 
|  | 566 | goto out; | 
|  | 567 |  | 
|  | 568 | /* It is OK that we do not hold the group lock right now, | 
|  | 569 | * as we run under the RTNL lock. | 
|  | 570 | */ | 
|  | 571 |  | 
|  | 572 | switch (event) { | 
|  | 573 | case NETDEV_CHANGE: | 
|  | 574 | /* Propagate real device state to vlan devices */ | 
|  | 575 | flgs = dev->state & VLAN_LINK_STATE_MASK; | 
|  | 576 | for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { | 
|  | 577 | vlandev = grp->vlan_devices[i]; | 
|  | 578 | if (!vlandev) | 
|  | 579 | continue; | 
|  | 580 |  | 
|  | 581 | if ((vlandev->state & VLAN_LINK_STATE_MASK) != flgs) { | 
|  | 582 | vlandev->state = (vlandev->state &~ VLAN_LINK_STATE_MASK) | 
|  | 583 | | flgs; | 
|  | 584 | netdev_state_change(vlandev); | 
|  | 585 | } | 
|  | 586 | } | 
|  | 587 | break; | 
|  | 588 |  | 
|  | 589 | case NETDEV_DOWN: | 
|  | 590 | /* Put all VLANs for this dev in the down state too.  */ | 
|  | 591 | for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { | 
|  | 592 | vlandev = grp->vlan_devices[i]; | 
|  | 593 | if (!vlandev) | 
|  | 594 | continue; | 
|  | 595 |  | 
|  | 596 | flgs = vlandev->flags; | 
|  | 597 | if (!(flgs & IFF_UP)) | 
|  | 598 | continue; | 
|  | 599 |  | 
|  | 600 | dev_change_flags(vlandev, flgs & ~IFF_UP); | 
|  | 601 | } | 
|  | 602 | break; | 
|  | 603 |  | 
|  | 604 | case NETDEV_UP: | 
|  | 605 | /* Put all VLANs for this dev in the up state too.  */ | 
|  | 606 | for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { | 
|  | 607 | vlandev = grp->vlan_devices[i]; | 
|  | 608 | if (!vlandev) | 
|  | 609 | continue; | 
|  | 610 |  | 
|  | 611 | flgs = vlandev->flags; | 
|  | 612 | if (flgs & IFF_UP) | 
|  | 613 | continue; | 
|  | 614 |  | 
|  | 615 | dev_change_flags(vlandev, flgs | IFF_UP); | 
|  | 616 | } | 
|  | 617 | break; | 
|  | 618 |  | 
|  | 619 | case NETDEV_UNREGISTER: | 
|  | 620 | /* Delete all VLANs for this dev. */ | 
|  | 621 | for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { | 
|  | 622 | int ret; | 
|  | 623 |  | 
|  | 624 | vlandev = grp->vlan_devices[i]; | 
|  | 625 | if (!vlandev) | 
|  | 626 | continue; | 
|  | 627 |  | 
|  | 628 | ret = unregister_vlan_dev(dev, | 
|  | 629 | VLAN_DEV_INFO(vlandev)->vlan_id); | 
|  | 630 |  | 
|  | 631 | unregister_netdevice(vlandev); | 
|  | 632 |  | 
|  | 633 | /* Group was destroyed? */ | 
|  | 634 | if (ret == 1) | 
|  | 635 | break; | 
|  | 636 | } | 
|  | 637 | break; | 
|  | 638 | }; | 
|  | 639 |  | 
|  | 640 | out: | 
|  | 641 | return NOTIFY_DONE; | 
|  | 642 | } | 
|  | 643 |  | 
|  | 644 | /* | 
|  | 645 | *	VLAN IOCTL handler. | 
|  | 646 | *	o execute requested action or pass command to the device driver | 
|  | 647 | *   arg is really a struct vlan_ioctl_args __user *. | 
|  | 648 | */ | 
|  | 649 | static int vlan_ioctl_handler(void __user *arg) | 
|  | 650 | { | 
|  | 651 | int err = 0; | 
|  | 652 | unsigned short vid = 0; | 
|  | 653 | struct vlan_ioctl_args args; | 
|  | 654 |  | 
|  | 655 | if (copy_from_user(&args, arg, sizeof(struct vlan_ioctl_args))) | 
|  | 656 | return -EFAULT; | 
|  | 657 |  | 
|  | 658 | /* Null terminate this sucker, just in case. */ | 
|  | 659 | args.device1[23] = 0; | 
|  | 660 | args.u.device2[23] = 0; | 
|  | 661 |  | 
|  | 662 | #ifdef VLAN_DEBUG | 
|  | 663 | printk(VLAN_DBG "%s: args.cmd: %x\n", __FUNCTION__, args.cmd); | 
|  | 664 | #endif | 
|  | 665 |  | 
|  | 666 | switch (args.cmd) { | 
|  | 667 | case SET_VLAN_INGRESS_PRIORITY_CMD: | 
|  | 668 | if (!capable(CAP_NET_ADMIN)) | 
|  | 669 | return -EPERM; | 
|  | 670 | err = vlan_dev_set_ingress_priority(args.device1, | 
|  | 671 | args.u.skb_priority, | 
|  | 672 | args.vlan_qos); | 
|  | 673 | break; | 
|  | 674 |  | 
|  | 675 | case SET_VLAN_EGRESS_PRIORITY_CMD: | 
|  | 676 | if (!capable(CAP_NET_ADMIN)) | 
|  | 677 | return -EPERM; | 
|  | 678 | err = vlan_dev_set_egress_priority(args.device1, | 
|  | 679 | args.u.skb_priority, | 
|  | 680 | args.vlan_qos); | 
|  | 681 | break; | 
|  | 682 |  | 
|  | 683 | case SET_VLAN_FLAG_CMD: | 
|  | 684 | if (!capable(CAP_NET_ADMIN)) | 
|  | 685 | return -EPERM; | 
|  | 686 | err = vlan_dev_set_vlan_flag(args.device1, | 
|  | 687 | args.u.flag, | 
|  | 688 | args.vlan_qos); | 
|  | 689 | break; | 
|  | 690 |  | 
|  | 691 | case SET_VLAN_NAME_TYPE_CMD: | 
|  | 692 | if (!capable(CAP_NET_ADMIN)) | 
|  | 693 | return -EPERM; | 
|  | 694 | if ((args.u.name_type >= 0) && | 
|  | 695 | (args.u.name_type < VLAN_NAME_TYPE_HIGHEST)) { | 
|  | 696 | vlan_name_type = args.u.name_type; | 
|  | 697 | err = 0; | 
|  | 698 | } else { | 
|  | 699 | err = -EINVAL; | 
|  | 700 | } | 
|  | 701 | break; | 
|  | 702 |  | 
|  | 703 | case ADD_VLAN_CMD: | 
|  | 704 | if (!capable(CAP_NET_ADMIN)) | 
|  | 705 | return -EPERM; | 
|  | 706 | /* we have been given the name of the Ethernet Device we want to | 
|  | 707 | * talk to:  args.dev1	 We also have the | 
|  | 708 | * VLAN ID:  args.u.VID | 
|  | 709 | */ | 
|  | 710 | if (register_vlan_device(args.device1, args.u.VID)) { | 
|  | 711 | err = 0; | 
|  | 712 | } else { | 
|  | 713 | err = -EINVAL; | 
|  | 714 | } | 
|  | 715 | break; | 
|  | 716 |  | 
|  | 717 | case DEL_VLAN_CMD: | 
|  | 718 | if (!capable(CAP_NET_ADMIN)) | 
|  | 719 | return -EPERM; | 
|  | 720 | /* Here, the args.dev1 is the actual VLAN we want | 
|  | 721 | * to get rid of. | 
|  | 722 | */ | 
|  | 723 | err = unregister_vlan_device(args.device1); | 
|  | 724 | break; | 
|  | 725 |  | 
|  | 726 | case GET_VLAN_INGRESS_PRIORITY_CMD: | 
|  | 727 | /* TODO:  Implement | 
|  | 728 | err = vlan_dev_get_ingress_priority(args); | 
|  | 729 | if (copy_to_user((void*)arg, &args, | 
|  | 730 | sizeof(struct vlan_ioctl_args))) { | 
|  | 731 | err = -EFAULT; | 
|  | 732 | } | 
|  | 733 | */ | 
|  | 734 | err = -EINVAL; | 
|  | 735 | break; | 
|  | 736 | case GET_VLAN_EGRESS_PRIORITY_CMD: | 
|  | 737 | /* TODO:  Implement | 
|  | 738 | err = vlan_dev_get_egress_priority(args.device1, &(args.args); | 
|  | 739 | if (copy_to_user((void*)arg, &args, | 
|  | 740 | sizeof(struct vlan_ioctl_args))) { | 
|  | 741 | err = -EFAULT; | 
|  | 742 | } | 
|  | 743 | */ | 
|  | 744 | err = -EINVAL; | 
|  | 745 | break; | 
|  | 746 | case GET_VLAN_REALDEV_NAME_CMD: | 
|  | 747 | err = vlan_dev_get_realdev_name(args.device1, args.u.device2); | 
|  | 748 | if (copy_to_user(arg, &args, | 
|  | 749 | sizeof(struct vlan_ioctl_args))) { | 
|  | 750 | err = -EFAULT; | 
|  | 751 | } | 
|  | 752 | break; | 
|  | 753 |  | 
|  | 754 | case GET_VLAN_VID_CMD: | 
|  | 755 | err = vlan_dev_get_vid(args.device1, &vid); | 
|  | 756 | args.u.VID = vid; | 
|  | 757 | if (copy_to_user(arg, &args, | 
|  | 758 | sizeof(struct vlan_ioctl_args))) { | 
|  | 759 | err = -EFAULT; | 
|  | 760 | } | 
|  | 761 | break; | 
|  | 762 |  | 
|  | 763 | default: | 
|  | 764 | /* pass on to underlying device instead?? */ | 
|  | 765 | printk(VLAN_DBG "%s: Unknown VLAN CMD: %x \n", | 
|  | 766 | __FUNCTION__, args.cmd); | 
|  | 767 | return -EINVAL; | 
|  | 768 | }; | 
|  | 769 |  | 
|  | 770 | return err; | 
|  | 771 | } | 
|  | 772 |  | 
|  | 773 | MODULE_LICENSE("GPL"); | 
|  | 774 | MODULE_VERSION(DRV_VERSION); |