blob: fc5263c6b10267b2869cf8b3a1967b97490b392b [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * ahci.c - AHCI SATA support
3 *
4 * Copyright 2004 Red Hat, Inc.
5 *
6 * The contents of this file are subject to the Open
7 * Software License version 1.1 that can be found at
8 * http://www.opensource.org/licenses/osl-1.1.txt and is included herein
9 * by reference.
10 *
11 * Alternatively, the contents of this file may be used under the terms
12 * of the GNU General Public License version 2 (the "GPL") as distributed
13 * in the kernel source COPYING file, in which case the provisions of
14 * the GPL are applicable instead of the above. If you wish to allow
15 * the use of your version of this file only under the terms of the
16 * GPL and not to allow others to use your version of this file under
17 * the OSL, indicate your decision by deleting the provisions above and
18 * replace them with the notice and other provisions required by the GPL.
19 * If you do not delete the provisions above, a recipient may use your
20 * version of this file under either the OSL or the GPL.
21 *
22 * Version 1.0 of the AHCI specification:
23 * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
24 *
25 */
26
27#include <linux/kernel.h>
28#include <linux/module.h>
29#include <linux/pci.h>
30#include <linux/init.h>
31#include <linux/blkdev.h>
32#include <linux/delay.h>
33#include <linux/interrupt.h>
34#include <linux/sched.h>
domen@coderock.org87507cf2005-04-08 09:53:06 +020035#include <linux/dma-mapping.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070036#include "scsi.h"
37#include <scsi/scsi_host.h>
38#include <linux/libata.h>
39#include <asm/io.h>
40
41#define DRV_NAME "ahci"
42#define DRV_VERSION "1.00"
43
44
45enum {
46 AHCI_PCI_BAR = 5,
47 AHCI_MAX_SG = 168, /* hardware max is 64K */
48 AHCI_DMA_BOUNDARY = 0xffffffff,
49 AHCI_USE_CLUSTERING = 0,
50 AHCI_CMD_SLOT_SZ = 32 * 32,
51 AHCI_RX_FIS_SZ = 256,
52 AHCI_CMD_TBL_HDR = 0x80,
53 AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16),
54 AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ +
55 AHCI_RX_FIS_SZ,
56 AHCI_IRQ_ON_SG = (1 << 31),
57 AHCI_CMD_ATAPI = (1 << 5),
58 AHCI_CMD_WRITE = (1 << 6),
59
60 RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
61
62 board_ahci = 0,
63
64 /* global controller registers */
65 HOST_CAP = 0x00, /* host capabilities */
66 HOST_CTL = 0x04, /* global host control */
67 HOST_IRQ_STAT = 0x08, /* interrupt status */
68 HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
69 HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
70
71 /* HOST_CTL bits */
72 HOST_RESET = (1 << 0), /* reset controller; self-clear */
73 HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
74 HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
75
76 /* HOST_CAP bits */
77 HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
78
79 /* registers for each SATA port */
80 PORT_LST_ADDR = 0x00, /* command list DMA addr */
81 PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
82 PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
83 PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
84 PORT_IRQ_STAT = 0x10, /* interrupt status */
85 PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
86 PORT_CMD = 0x18, /* port command */
87 PORT_TFDATA = 0x20, /* taskfile data */
88 PORT_SIG = 0x24, /* device TF signature */
89 PORT_CMD_ISSUE = 0x38, /* command issue */
90 PORT_SCR = 0x28, /* SATA phy register block */
91 PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
92 PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
93 PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
94 PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
95
96 /* PORT_IRQ_{STAT,MASK} bits */
97 PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
98 PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
99 PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
100 PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
101 PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
102 PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
103 PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
104 PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
105
106 PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
107 PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
108 PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
109 PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
110 PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
111 PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
112 PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
113 PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
114 PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
115
116 PORT_IRQ_FATAL = PORT_IRQ_TF_ERR |
117 PORT_IRQ_HBUS_ERR |
118 PORT_IRQ_HBUS_DATA_ERR |
119 PORT_IRQ_IF_ERR,
120 DEF_PORT_IRQ = PORT_IRQ_FATAL | PORT_IRQ_PHYRDY |
121 PORT_IRQ_CONNECT | PORT_IRQ_SG_DONE |
122 PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_FIS |
123 PORT_IRQ_DMAS_FIS | PORT_IRQ_PIOS_FIS |
124 PORT_IRQ_D2H_REG_FIS,
125
126 /* PORT_CMD bits */
127 PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
128 PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
129 PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
130 PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
131 PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
132 PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
133
134 PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
135 PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
136 PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
137};
138
139struct ahci_cmd_hdr {
140 u32 opts;
141 u32 status;
142 u32 tbl_addr;
143 u32 tbl_addr_hi;
144 u32 reserved[4];
145};
146
147struct ahci_sg {
148 u32 addr;
149 u32 addr_hi;
150 u32 reserved;
151 u32 flags_size;
152};
153
154struct ahci_host_priv {
155 unsigned long flags;
156 u32 cap; /* cache of HOST_CAP register */
157 u32 port_map; /* cache of HOST_PORTS_IMPL reg */
158};
159
160struct ahci_port_priv {
161 struct ahci_cmd_hdr *cmd_slot;
162 dma_addr_t cmd_slot_dma;
163 void *cmd_tbl;
164 dma_addr_t cmd_tbl_dma;
165 struct ahci_sg *cmd_tbl_sg;
166 void *rx_fis;
167 dma_addr_t rx_fis_dma;
168};
169
170static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg);
171static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
172static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
173static int ahci_qc_issue(struct ata_queued_cmd *qc);
174static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
175static void ahci_phy_reset(struct ata_port *ap);
176static void ahci_irq_clear(struct ata_port *ap);
177static void ahci_eng_timeout(struct ata_port *ap);
178static int ahci_port_start(struct ata_port *ap);
179static void ahci_port_stop(struct ata_port *ap);
180static void ahci_host_stop(struct ata_host_set *host_set);
181static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
182static void ahci_qc_prep(struct ata_queued_cmd *qc);
183static u8 ahci_check_status(struct ata_port *ap);
184static u8 ahci_check_err(struct ata_port *ap);
185static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
186
187static Scsi_Host_Template ahci_sht = {
188 .module = THIS_MODULE,
189 .name = DRV_NAME,
190 .ioctl = ata_scsi_ioctl,
191 .queuecommand = ata_scsi_queuecmd,
192 .eh_strategy_handler = ata_scsi_error,
193 .can_queue = ATA_DEF_QUEUE,
194 .this_id = ATA_SHT_THIS_ID,
195 .sg_tablesize = AHCI_MAX_SG,
196 .max_sectors = ATA_MAX_SECTORS,
197 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
198 .emulated = ATA_SHT_EMULATED,
199 .use_clustering = AHCI_USE_CLUSTERING,
200 .proc_name = DRV_NAME,
201 .dma_boundary = AHCI_DMA_BOUNDARY,
202 .slave_configure = ata_scsi_slave_config,
203 .bios_param = ata_std_bios_param,
204 .ordered_flush = 1,
205};
206
207static struct ata_port_operations ahci_ops = {
208 .port_disable = ata_port_disable,
209
210 .check_status = ahci_check_status,
211 .check_altstatus = ahci_check_status,
212 .check_err = ahci_check_err,
213 .dev_select = ata_noop_dev_select,
214
215 .tf_read = ahci_tf_read,
216
217 .phy_reset = ahci_phy_reset,
218
219 .qc_prep = ahci_qc_prep,
220 .qc_issue = ahci_qc_issue,
221
222 .eng_timeout = ahci_eng_timeout,
223
224 .irq_handler = ahci_interrupt,
225 .irq_clear = ahci_irq_clear,
226
227 .scr_read = ahci_scr_read,
228 .scr_write = ahci_scr_write,
229
230 .port_start = ahci_port_start,
231 .port_stop = ahci_port_stop,
232 .host_stop = ahci_host_stop,
233};
234
235static struct ata_port_info ahci_port_info[] = {
236 /* board_ahci */
237 {
238 .sht = &ahci_sht,
239 .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
240 ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
241 ATA_FLAG_PIO_DMA,
242 .pio_mask = 0x03, /* pio3-4 */
243 .udma_mask = 0x7f, /* udma0-6 ; FIXME */
244 .port_ops = &ahci_ops,
245 },
246};
247
248static struct pci_device_id ahci_pci_tbl[] = {
249 { PCI_VENDOR_ID_INTEL, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
250 board_ahci }, /* ICH6 */
251 { PCI_VENDOR_ID_INTEL, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
252 board_ahci }, /* ICH6M */
253 { PCI_VENDOR_ID_INTEL, 0x27c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
254 board_ahci }, /* ICH7 */
255 { PCI_VENDOR_ID_INTEL, 0x27c5, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
256 board_ahci }, /* ICH7M */
257 { PCI_VENDOR_ID_INTEL, 0x27c3, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
258 board_ahci }, /* ICH7R */
259 { PCI_VENDOR_ID_AL, 0x5288, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
260 board_ahci }, /* ULi M5288 */
Jason Gaston680d3232005-04-16 15:24:45 -0700261 { PCI_VENDOR_ID_INTEL, 0x2681, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
262 board_ahci }, /* ESB2 */
263 { PCI_VENDOR_ID_INTEL, 0x2682, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
264 board_ahci }, /* ESB2 */
265 { PCI_VENDOR_ID_INTEL, 0x2683, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
266 board_ahci }, /* ESB2 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700267 { } /* terminate list */
268};
269
270
271static struct pci_driver ahci_pci_driver = {
272 .name = DRV_NAME,
273 .id_table = ahci_pci_tbl,
274 .probe = ahci_init_one,
275 .remove = ata_pci_remove_one,
276};
277
278
279static inline unsigned long ahci_port_base_ul (unsigned long base, unsigned int port)
280{
281 return base + 0x100 + (port * 0x80);
282}
283
284static inline void *ahci_port_base (void *base, unsigned int port)
285{
286 return (void *) ahci_port_base_ul((unsigned long)base, port);
287}
288
289static void ahci_host_stop(struct ata_host_set *host_set)
290{
291 struct ahci_host_priv *hpriv = host_set->private_data;
292 kfree(hpriv);
Jeff Garzikaa8f0dc2005-05-26 21:54:27 -0400293
294 ata_host_stop(host_set);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700295}
296
297static int ahci_port_start(struct ata_port *ap)
298{
299 struct device *dev = ap->host_set->dev;
300 struct ahci_host_priv *hpriv = ap->host_set->private_data;
301 struct ahci_port_priv *pp;
302 int rc;
303 void *mem, *mmio = ap->host_set->mmio_base;
304 void *port_mmio = ahci_port_base(mmio, ap->port_no);
305 dma_addr_t mem_dma;
306
307 rc = ata_port_start(ap);
308 if (rc)
309 return rc;
310
311 pp = kmalloc(sizeof(*pp), GFP_KERNEL);
312 if (!pp) {
313 rc = -ENOMEM;
314 goto err_out;
315 }
316 memset(pp, 0, sizeof(*pp));
317
318 mem = dma_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL);
319 if (!mem) {
320 rc = -ENOMEM;
321 goto err_out_kfree;
322 }
323 memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
324
325 /*
326 * First item in chunk of DMA memory: 32-slot command table,
327 * 32 bytes each in size
328 */
329 pp->cmd_slot = mem;
330 pp->cmd_slot_dma = mem_dma;
331
332 mem += AHCI_CMD_SLOT_SZ;
333 mem_dma += AHCI_CMD_SLOT_SZ;
334
335 /*
336 * Second item: Received-FIS area
337 */
338 pp->rx_fis = mem;
339 pp->rx_fis_dma = mem_dma;
340
341 mem += AHCI_RX_FIS_SZ;
342 mem_dma += AHCI_RX_FIS_SZ;
343
344 /*
345 * Third item: data area for storing a single command
346 * and its scatter-gather table
347 */
348 pp->cmd_tbl = mem;
349 pp->cmd_tbl_dma = mem_dma;
350
351 pp->cmd_tbl_sg = mem + AHCI_CMD_TBL_HDR;
352
353 ap->private_data = pp;
354
355 if (hpriv->cap & HOST_CAP_64)
356 writel((pp->cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI);
357 writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
358 readl(port_mmio + PORT_LST_ADDR); /* flush */
359
360 if (hpriv->cap & HOST_CAP_64)
361 writel((pp->rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI);
362 writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
363 readl(port_mmio + PORT_FIS_ADDR); /* flush */
364
365 writel(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX |
366 PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP |
367 PORT_CMD_START, port_mmio + PORT_CMD);
368 readl(port_mmio + PORT_CMD); /* flush */
369
370 return 0;
371
372err_out_kfree:
373 kfree(pp);
374err_out:
375 ata_port_stop(ap);
376 return rc;
377}
378
379
380static void ahci_port_stop(struct ata_port *ap)
381{
382 struct device *dev = ap->host_set->dev;
383 struct ahci_port_priv *pp = ap->private_data;
384 void *mmio = ap->host_set->mmio_base;
385 void *port_mmio = ahci_port_base(mmio, ap->port_no);
386 u32 tmp;
387
388 tmp = readl(port_mmio + PORT_CMD);
389 tmp &= ~(PORT_CMD_START | PORT_CMD_FIS_RX);
390 writel(tmp, port_mmio + PORT_CMD);
391 readl(port_mmio + PORT_CMD); /* flush */
392
393 /* spec says 500 msecs for each PORT_CMD_{START,FIS_RX} bit, so
394 * this is slightly incorrect.
395 */
396 msleep(500);
397
398 ap->private_data = NULL;
399 dma_free_coherent(dev, AHCI_PORT_PRIV_DMA_SZ,
400 pp->cmd_slot, pp->cmd_slot_dma);
401 kfree(pp);
402 ata_port_stop(ap);
403}
404
405static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in)
406{
407 unsigned int sc_reg;
408
409 switch (sc_reg_in) {
410 case SCR_STATUS: sc_reg = 0; break;
411 case SCR_CONTROL: sc_reg = 1; break;
412 case SCR_ERROR: sc_reg = 2; break;
413 case SCR_ACTIVE: sc_reg = 3; break;
414 default:
415 return 0xffffffffU;
416 }
417
418 return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4));
419}
420
421
422static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in,
423 u32 val)
424{
425 unsigned int sc_reg;
426
427 switch (sc_reg_in) {
428 case SCR_STATUS: sc_reg = 0; break;
429 case SCR_CONTROL: sc_reg = 1; break;
430 case SCR_ERROR: sc_reg = 2; break;
431 case SCR_ACTIVE: sc_reg = 3; break;
432 default:
433 return;
434 }
435
436 writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4));
437}
438
439static void ahci_phy_reset(struct ata_port *ap)
440{
441 void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr;
442 struct ata_taskfile tf;
443 struct ata_device *dev = &ap->device[0];
444 u32 tmp;
445
446 __sata_phy_reset(ap);
447
448 if (ap->flags & ATA_FLAG_PORT_DISABLED)
449 return;
450
451 tmp = readl(port_mmio + PORT_SIG);
452 tf.lbah = (tmp >> 24) & 0xff;
453 tf.lbam = (tmp >> 16) & 0xff;
454 tf.lbal = (tmp >> 8) & 0xff;
455 tf.nsect = (tmp) & 0xff;
456
457 dev->class = ata_dev_classify(&tf);
458 if (!ata_dev_present(dev))
459 ata_port_disable(ap);
460}
461
462static u8 ahci_check_status(struct ata_port *ap)
463{
464 void *mmio = (void *) ap->ioaddr.cmd_addr;
465
466 return readl(mmio + PORT_TFDATA) & 0xFF;
467}
468
469static u8 ahci_check_err(struct ata_port *ap)
470{
471 void *mmio = (void *) ap->ioaddr.cmd_addr;
472
473 return (readl(mmio + PORT_TFDATA) >> 8) & 0xFF;
474}
475
476static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
477{
478 struct ahci_port_priv *pp = ap->private_data;
479 u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
480
481 ata_tf_from_fis(d2h_fis, tf);
482}
483
484static void ahci_fill_sg(struct ata_queued_cmd *qc)
485{
486 struct ahci_port_priv *pp = qc->ap->private_data;
487 unsigned int i;
488
489 VPRINTK("ENTER\n");
490
491 /*
492 * Next, the S/G list.
493 */
494 for (i = 0; i < qc->n_elem; i++) {
495 u32 sg_len;
496 dma_addr_t addr;
497
498 addr = sg_dma_address(&qc->sg[i]);
499 sg_len = sg_dma_len(&qc->sg[i]);
500
501 pp->cmd_tbl_sg[i].addr = cpu_to_le32(addr & 0xffffffff);
502 pp->cmd_tbl_sg[i].addr_hi = cpu_to_le32((addr >> 16) >> 16);
503 pp->cmd_tbl_sg[i].flags_size = cpu_to_le32(sg_len - 1);
504 }
505}
506
507static void ahci_qc_prep(struct ata_queued_cmd *qc)
508{
509 struct ahci_port_priv *pp = qc->ap->private_data;
510 u32 opts;
511 const u32 cmd_fis_len = 5; /* five dwords */
512
513 /*
514 * Fill in command slot information (currently only one slot,
515 * slot 0, is currently since we don't do queueing)
516 */
517
518 opts = (qc->n_elem << 16) | cmd_fis_len;
519 if (qc->tf.flags & ATA_TFLAG_WRITE)
520 opts |= AHCI_CMD_WRITE;
521
522 switch (qc->tf.protocol) {
523 case ATA_PROT_ATAPI:
524 case ATA_PROT_ATAPI_NODATA:
525 case ATA_PROT_ATAPI_DMA:
526 opts |= AHCI_CMD_ATAPI;
527 break;
528
529 default:
530 /* do nothing */
531 break;
532 }
533
534 pp->cmd_slot[0].opts = cpu_to_le32(opts);
535 pp->cmd_slot[0].status = 0;
536 pp->cmd_slot[0].tbl_addr = cpu_to_le32(pp->cmd_tbl_dma & 0xffffffff);
537 pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16);
538
539 /*
540 * Fill in command table information. First, the header,
541 * a SATA Register - Host to Device command FIS.
542 */
543 ata_tf_to_fis(&qc->tf, pp->cmd_tbl, 0);
544
545 if (!(qc->flags & ATA_QCFLAG_DMAMAP))
546 return;
547
548 ahci_fill_sg(qc);
549}
550
551static void ahci_intr_error(struct ata_port *ap, u32 irq_stat)
552{
553 void *mmio = ap->host_set->mmio_base;
554 void *port_mmio = ahci_port_base(mmio, ap->port_no);
555 u32 tmp;
556 int work;
557
558 /* stop DMA */
559 tmp = readl(port_mmio + PORT_CMD);
560 tmp &= ~PORT_CMD_START;
561 writel(tmp, port_mmio + PORT_CMD);
562
563 /* wait for engine to stop. TODO: this could be
564 * as long as 500 msec
565 */
566 work = 1000;
567 while (work-- > 0) {
568 tmp = readl(port_mmio + PORT_CMD);
569 if ((tmp & PORT_CMD_LIST_ON) == 0)
570 break;
571 udelay(10);
572 }
573
574 /* clear SATA phy error, if any */
575 tmp = readl(port_mmio + PORT_SCR_ERR);
576 writel(tmp, port_mmio + PORT_SCR_ERR);
577
578 /* if DRQ/BSY is set, device needs to be reset.
579 * if so, issue COMRESET
580 */
581 tmp = readl(port_mmio + PORT_TFDATA);
582 if (tmp & (ATA_BUSY | ATA_DRQ)) {
583 writel(0x301, port_mmio + PORT_SCR_CTL);
584 readl(port_mmio + PORT_SCR_CTL); /* flush */
585 udelay(10);
586 writel(0x300, port_mmio + PORT_SCR_CTL);
587 readl(port_mmio + PORT_SCR_CTL); /* flush */
588 }
589
590 /* re-start DMA */
591 tmp = readl(port_mmio + PORT_CMD);
592 tmp |= PORT_CMD_START;
593 writel(tmp, port_mmio + PORT_CMD);
594 readl(port_mmio + PORT_CMD); /* flush */
595
596 printk(KERN_WARNING "ata%u: error occurred, port reset\n", ap->id);
597}
598
599static void ahci_eng_timeout(struct ata_port *ap)
600{
601 void *mmio = ap->host_set->mmio_base;
602 void *port_mmio = ahci_port_base(mmio, ap->port_no);
603 struct ata_queued_cmd *qc;
604
605 DPRINTK("ENTER\n");
606
607 ahci_intr_error(ap, readl(port_mmio + PORT_IRQ_STAT));
608
609 qc = ata_qc_from_tag(ap, ap->active_tag);
610 if (!qc) {
611 printk(KERN_ERR "ata%u: BUG: timeout without command\n",
612 ap->id);
613 } else {
614 /* hack alert! We cannot use the supplied completion
615 * function from inside the ->eh_strategy_handler() thread.
616 * libata is the only user of ->eh_strategy_handler() in
617 * any kernel, so the default scsi_done() assumes it is
618 * not being called from the SCSI EH.
619 */
620 qc->scsidone = scsi_finish_command;
621 ata_qc_complete(qc, ATA_ERR);
622 }
623
624}
625
626static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
627{
628 void *mmio = ap->host_set->mmio_base;
629 void *port_mmio = ahci_port_base(mmio, ap->port_no);
630 u32 status, serr, ci;
631
632 serr = readl(port_mmio + PORT_SCR_ERR);
633 writel(serr, port_mmio + PORT_SCR_ERR);
634
635 status = readl(port_mmio + PORT_IRQ_STAT);
636 writel(status, port_mmio + PORT_IRQ_STAT);
637
638 ci = readl(port_mmio + PORT_CMD_ISSUE);
639 if (likely((ci & 0x1) == 0)) {
640 if (qc) {
641 ata_qc_complete(qc, 0);
642 qc = NULL;
643 }
644 }
645
646 if (status & PORT_IRQ_FATAL) {
647 ahci_intr_error(ap, status);
648 if (qc)
649 ata_qc_complete(qc, ATA_ERR);
650 }
651
652 return 1;
653}
654
655static void ahci_irq_clear(struct ata_port *ap)
656{
657 /* TODO */
658}
659
660static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
661{
662 struct ata_host_set *host_set = dev_instance;
663 struct ahci_host_priv *hpriv;
664 unsigned int i, handled = 0;
665 void *mmio;
666 u32 irq_stat, irq_ack = 0;
667
668 VPRINTK("ENTER\n");
669
670 hpriv = host_set->private_data;
671 mmio = host_set->mmio_base;
672
673 /* sigh. 0xffffffff is a valid return from h/w */
674 irq_stat = readl(mmio + HOST_IRQ_STAT);
675 irq_stat &= hpriv->port_map;
676 if (!irq_stat)
677 return IRQ_NONE;
678
679 spin_lock(&host_set->lock);
680
681 for (i = 0; i < host_set->n_ports; i++) {
682 struct ata_port *ap;
683 u32 tmp;
684
685 VPRINTK("port %u\n", i);
686 ap = host_set->ports[i];
687 tmp = irq_stat & (1 << i);
688 if (tmp && ap) {
689 struct ata_queued_cmd *qc;
690 qc = ata_qc_from_tag(ap, ap->active_tag);
691 if (ahci_host_intr(ap, qc))
692 irq_ack |= (1 << i);
693 }
694 }
695
696 if (irq_ack) {
697 writel(irq_ack, mmio + HOST_IRQ_STAT);
698 handled = 1;
699 }
700
701 spin_unlock(&host_set->lock);
702
703 VPRINTK("EXIT\n");
704
705 return IRQ_RETVAL(handled);
706}
707
708static int ahci_qc_issue(struct ata_queued_cmd *qc)
709{
710 struct ata_port *ap = qc->ap;
711 void *port_mmio = (void *) ap->ioaddr.cmd_addr;
712
713 writel(1, port_mmio + PORT_SCR_ACT);
714 readl(port_mmio + PORT_SCR_ACT); /* flush */
715
716 writel(1, port_mmio + PORT_CMD_ISSUE);
717 readl(port_mmio + PORT_CMD_ISSUE); /* flush */
718
719 return 0;
720}
721
722static void ahci_setup_port(struct ata_ioports *port, unsigned long base,
723 unsigned int port_idx)
724{
725 VPRINTK("ENTER, base==0x%lx, port_idx %u\n", base, port_idx);
726 base = ahci_port_base_ul(base, port_idx);
727 VPRINTK("base now==0x%lx\n", base);
728
729 port->cmd_addr = base;
730 port->scr_addr = base + PORT_SCR;
731
732 VPRINTK("EXIT\n");
733}
734
735static int ahci_host_init(struct ata_probe_ent *probe_ent)
736{
737 struct ahci_host_priv *hpriv = probe_ent->private_data;
738 struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
739 void __iomem *mmio = probe_ent->mmio_base;
740 u32 tmp, cap_save;
741 u16 tmp16;
742 unsigned int i, j, using_dac;
743 int rc;
744 void __iomem *port_mmio;
745
746 cap_save = readl(mmio + HOST_CAP);
747 cap_save &= ( (1<<28) | (1<<17) );
748 cap_save |= (1 << 27);
749
750 /* global controller reset */
751 tmp = readl(mmio + HOST_CTL);
752 if ((tmp & HOST_RESET) == 0) {
753 writel(tmp | HOST_RESET, mmio + HOST_CTL);
754 readl(mmio + HOST_CTL); /* flush */
755 }
756
757 /* reset must complete within 1 second, or
758 * the hardware should be considered fried.
759 */
760 ssleep(1);
761
762 tmp = readl(mmio + HOST_CTL);
763 if (tmp & HOST_RESET) {
764 printk(KERN_ERR DRV_NAME "(%s): controller reset failed (0x%x)\n",
765 pci_name(pdev), tmp);
766 return -EIO;
767 }
768
769 writel(HOST_AHCI_EN, mmio + HOST_CTL);
770 (void) readl(mmio + HOST_CTL); /* flush */
771 writel(cap_save, mmio + HOST_CAP);
772 writel(0xf, mmio + HOST_PORTS_IMPL);
773 (void) readl(mmio + HOST_PORTS_IMPL); /* flush */
774
775 pci_read_config_word(pdev, 0x92, &tmp16);
776 tmp16 |= 0xf;
777 pci_write_config_word(pdev, 0x92, tmp16);
778
779 hpriv->cap = readl(mmio + HOST_CAP);
780 hpriv->port_map = readl(mmio + HOST_PORTS_IMPL);
781 probe_ent->n_ports = (hpriv->cap & 0x1f) + 1;
782
783 VPRINTK("cap 0x%x port_map 0x%x n_ports %d\n",
784 hpriv->cap, hpriv->port_map, probe_ent->n_ports);
785
786 using_dac = hpriv->cap & HOST_CAP_64;
787 if (using_dac &&
788 !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
789 rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
790 if (rc) {
791 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
792 if (rc) {
793 printk(KERN_ERR DRV_NAME "(%s): 64-bit DMA enable failed\n",
794 pci_name(pdev));
795 return rc;
796 }
797 }
798
799 hpriv->flags |= HOST_CAP_64;
800 } else {
801 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
802 if (rc) {
803 printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n",
804 pci_name(pdev));
805 return rc;
806 }
807 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
808 if (rc) {
809 printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n",
810 pci_name(pdev));
811 return rc;
812 }
813 }
814
815 for (i = 0; i < probe_ent->n_ports; i++) {
816#if 0 /* BIOSen initialize this incorrectly */
817 if (!(hpriv->port_map & (1 << i)))
818 continue;
819#endif
820
821 port_mmio = ahci_port_base(mmio, i);
822 VPRINTK("mmio %p port_mmio %p\n", mmio, port_mmio);
823
824 ahci_setup_port(&probe_ent->port[i],
825 (unsigned long) mmio, i);
826
827 /* make sure port is not active */
828 tmp = readl(port_mmio + PORT_CMD);
829 VPRINTK("PORT_CMD 0x%x\n", tmp);
830 if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
831 PORT_CMD_FIS_RX | PORT_CMD_START)) {
832 tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
833 PORT_CMD_FIS_RX | PORT_CMD_START);
834 writel(tmp, port_mmio + PORT_CMD);
835 readl(port_mmio + PORT_CMD); /* flush */
836
837 /* spec says 500 msecs for each bit, so
838 * this is slightly incorrect.
839 */
840 msleep(500);
841 }
842
843 writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD);
844
845 j = 0;
846 while (j < 100) {
847 msleep(10);
848 tmp = readl(port_mmio + PORT_SCR_STAT);
849 if ((tmp & 0xf) == 0x3)
850 break;
851 j++;
852 }
853
854 tmp = readl(port_mmio + PORT_SCR_ERR);
855 VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
856 writel(tmp, port_mmio + PORT_SCR_ERR);
857
858 /* ack any pending irq events for this port */
859 tmp = readl(port_mmio + PORT_IRQ_STAT);
860 VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
861 if (tmp)
862 writel(tmp, port_mmio + PORT_IRQ_STAT);
863
864 writel(1 << i, mmio + HOST_IRQ_STAT);
865
866 /* set irq mask (enables interrupts) */
867 writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK);
868 }
869
870 tmp = readl(mmio + HOST_CTL);
871 VPRINTK("HOST_CTL 0x%x\n", tmp);
872 writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
873 tmp = readl(mmio + HOST_CTL);
874 VPRINTK("HOST_CTL 0x%x\n", tmp);
875
876 pci_set_master(pdev);
877
878 return 0;
879}
880
881/* move to PCI layer, integrate w/ MSI stuff */
882static void pci_enable_intx(struct pci_dev *pdev)
883{
884 u16 pci_command;
885
886 pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
887 if (pci_command & PCI_COMMAND_INTX_DISABLE) {
888 pci_command &= ~PCI_COMMAND_INTX_DISABLE;
889 pci_write_config_word(pdev, PCI_COMMAND, pci_command);
890 }
891}
892
893static void ahci_print_info(struct ata_probe_ent *probe_ent)
894{
895 struct ahci_host_priv *hpriv = probe_ent->private_data;
896 struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
897 void *mmio = probe_ent->mmio_base;
898 u32 vers, cap, impl, speed;
899 const char *speed_s;
900 u16 cc;
901 const char *scc_s;
902
903 vers = readl(mmio + HOST_VERSION);
904 cap = hpriv->cap;
905 impl = hpriv->port_map;
906
907 speed = (cap >> 20) & 0xf;
908 if (speed == 1)
909 speed_s = "1.5";
910 else if (speed == 2)
911 speed_s = "3";
912 else
913 speed_s = "?";
914
915 pci_read_config_word(pdev, 0x0a, &cc);
916 if (cc == 0x0101)
917 scc_s = "IDE";
918 else if (cc == 0x0106)
919 scc_s = "SATA";
920 else if (cc == 0x0104)
921 scc_s = "RAID";
922 else
923 scc_s = "unknown";
924
925 printk(KERN_INFO DRV_NAME "(%s) AHCI %02x%02x.%02x%02x "
926 "%u slots %u ports %s Gbps 0x%x impl %s mode\n"
927 ,
928 pci_name(pdev),
929
930 (vers >> 24) & 0xff,
931 (vers >> 16) & 0xff,
932 (vers >> 8) & 0xff,
933 vers & 0xff,
934
935 ((cap >> 8) & 0x1f) + 1,
936 (cap & 0x1f) + 1,
937 speed_s,
938 impl,
939 scc_s);
940
941 printk(KERN_INFO DRV_NAME "(%s) flags: "
942 "%s%s%s%s%s%s"
943 "%s%s%s%s%s%s%s\n"
944 ,
945 pci_name(pdev),
946
947 cap & (1 << 31) ? "64bit " : "",
948 cap & (1 << 30) ? "ncq " : "",
949 cap & (1 << 28) ? "ilck " : "",
950 cap & (1 << 27) ? "stag " : "",
951 cap & (1 << 26) ? "pm " : "",
952 cap & (1 << 25) ? "led " : "",
953
954 cap & (1 << 24) ? "clo " : "",
955 cap & (1 << 19) ? "nz " : "",
956 cap & (1 << 18) ? "only " : "",
957 cap & (1 << 17) ? "pmp " : "",
958 cap & (1 << 15) ? "pio " : "",
959 cap & (1 << 14) ? "slum " : "",
960 cap & (1 << 13) ? "part " : ""
961 );
962}
963
964static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
965{
966 static int printed_version;
967 struct ata_probe_ent *probe_ent = NULL;
968 struct ahci_host_priv *hpriv;
969 unsigned long base;
970 void *mmio_base;
971 unsigned int board_idx = (unsigned int) ent->driver_data;
972 int pci_dev_busy = 0;
973 int rc;
974
975 VPRINTK("ENTER\n");
976
977 if (!printed_version++)
978 printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
979
980 rc = pci_enable_device(pdev);
981 if (rc)
982 return rc;
983
984 rc = pci_request_regions(pdev, DRV_NAME);
985 if (rc) {
986 pci_dev_busy = 1;
987 goto err_out;
988 }
989
990 pci_enable_intx(pdev);
991
992 probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
993 if (probe_ent == NULL) {
994 rc = -ENOMEM;
995 goto err_out_regions;
996 }
997
998 memset(probe_ent, 0, sizeof(*probe_ent));
999 probe_ent->dev = pci_dev_to_dev(pdev);
1000 INIT_LIST_HEAD(&probe_ent->node);
1001
1002 mmio_base = ioremap(pci_resource_start(pdev, AHCI_PCI_BAR),
1003 pci_resource_len(pdev, AHCI_PCI_BAR));
1004 if (mmio_base == NULL) {
1005 rc = -ENOMEM;
1006 goto err_out_free_ent;
1007 }
1008 base = (unsigned long) mmio_base;
1009
1010 hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL);
1011 if (!hpriv) {
1012 rc = -ENOMEM;
1013 goto err_out_iounmap;
1014 }
1015 memset(hpriv, 0, sizeof(*hpriv));
1016
1017 probe_ent->sht = ahci_port_info[board_idx].sht;
1018 probe_ent->host_flags = ahci_port_info[board_idx].host_flags;
1019 probe_ent->pio_mask = ahci_port_info[board_idx].pio_mask;
1020 probe_ent->udma_mask = ahci_port_info[board_idx].udma_mask;
1021 probe_ent->port_ops = ahci_port_info[board_idx].port_ops;
1022
1023 probe_ent->irq = pdev->irq;
1024 probe_ent->irq_flags = SA_SHIRQ;
1025 probe_ent->mmio_base = mmio_base;
1026 probe_ent->private_data = hpriv;
1027
1028 /* initialize adapter */
1029 rc = ahci_host_init(probe_ent);
1030 if (rc)
1031 goto err_out_hpriv;
1032
1033 ahci_print_info(probe_ent);
1034
1035 /* FIXME: check ata_device_add return value */
1036 ata_device_add(probe_ent);
1037 kfree(probe_ent);
1038
1039 return 0;
1040
1041err_out_hpriv:
1042 kfree(hpriv);
1043err_out_iounmap:
1044 iounmap(mmio_base);
1045err_out_free_ent:
1046 kfree(probe_ent);
1047err_out_regions:
1048 pci_release_regions(pdev);
1049err_out:
1050 if (!pci_dev_busy)
1051 pci_disable_device(pdev);
1052 return rc;
1053}
1054
1055
1056static int __init ahci_init(void)
1057{
1058 return pci_module_init(&ahci_pci_driver);
1059}
1060
1061
1062static void __exit ahci_exit(void)
1063{
1064 pci_unregister_driver(&ahci_pci_driver);
1065}
1066
1067
1068MODULE_AUTHOR("Jeff Garzik");
1069MODULE_DESCRIPTION("AHCI SATA low-level driver");
1070MODULE_LICENSE("GPL");
1071MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
1072
1073module_init(ahci_init);
1074module_exit(ahci_exit);