| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * abyss.h: Header for the abyss tms380tr module |
| 3 | * |
| 4 | * Authors: |
| Joe Perches | 726a645 | 2008-02-03 16:36:24 +0200 | [diff] [blame] | 5 | * - Adam Fritzler |
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | #ifndef __LINUX_MADGETR_H |
| 9 | #define __LINUX_MADGETR_H |
| 10 | |
| 11 | #ifdef __KERNEL__ |
| 12 | |
| 13 | /* |
| 14 | * For Madge Smart 16/4 PCI Mk2. Since we increment the base address |
| 15 | * to get everything correct for the TMS SIF, we do these as negatives |
| 16 | * as they fall below the SIF in addressing. |
| 17 | */ |
| 18 | #define PCIBM2_INT_STATUS_REG ((short)-15)/* 0x01 */ |
| 19 | #define PCIBM2_INT_CONTROL_REG ((short)-14)/* 0x02 */ |
| 20 | #define PCIBM2_RESET_REG ((short)-12)/* 0x04 */ |
| 21 | #define PCIBM2_SEEPROM_REG ((short)-9) /* 0x07 */ |
| 22 | |
| 23 | #define PCIBM2_INT_CONTROL_REG_SINTEN 0x02 |
| 24 | #define PCIBM2_INT_CONTROL_REG_PCI_ERR_ENABLE 0x80 |
| 25 | #define PCIBM2_INT_STATUS_REG_PCI_ERR 0x80 |
| 26 | |
| 27 | #define PCIBM2_RESET_REG_CHIP_NRES 0x01 |
| 28 | #define PCIBM2_RESET_REG_FIFO_NRES 0x02 |
| 29 | #define PCIBM2_RESET_REG_SIF_NRES 0x04 |
| 30 | |
| 31 | #define PCIBM2_FIFO_THRESHOLD 0x21 |
| 32 | #define PCIBM2_BURST_LENGTH 0x22 |
| 33 | |
| 34 | /* |
| 35 | * Bits in PCIBM2_SEEPROM_REG. |
| 36 | */ |
| 37 | #define AT24_ENABLE 0x04 |
| 38 | #define AT24_DATA 0x02 |
| 39 | #define AT24_CLOCK 0x01 |
| 40 | |
| 41 | /* |
| 42 | * AT24 Commands. |
| 43 | */ |
| 44 | #define AT24_WRITE 0xA0 |
| 45 | #define AT24_READ 0xA1 |
| 46 | |
| 47 | /* |
| 48 | * Addresses in AT24 SEEPROM. |
| 49 | */ |
| 50 | #define PCIBM2_SEEPROM_BIA 0x12 |
| 51 | #define PCIBM2_SEEPROM_RING_SPEED 0x18 |
| 52 | #define PCIBM2_SEEPROM_RAM_SIZE 0x1A |
| 53 | #define PCIBM2_SEEPROM_HWF1 0x1C |
| 54 | #define PCIBM2_SEEPROM_HWF2 0x1E |
| 55 | |
| 56 | |
| 57 | #endif /* __KERNEL__ */ |
| 58 | #endif /* __LINUX_MADGETR_H */ |