| Maxime Bizon | 553d6d5 | 2009-09-28 14:49:43 +0200 | [diff] [blame] | 1 | /* | 
|  | 2 | * This file is subject to the terms and conditions of the GNU General Public | 
|  | 3 | * License.  See the file "COPYING" in the main directory of this archive | 
|  | 4 | * for more details. | 
|  | 5 | * | 
|  | 6 | * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> | 
|  | 7 | */ | 
|  | 8 |  | 
|  | 9 | #include <linux/kernel.h> | 
|  | 10 | #include <linux/module.h> | 
|  | 11 | #include <linux/ioport.h> | 
|  | 12 | #include <linux/timer.h> | 
|  | 13 | #include <linux/platform_device.h> | 
| Tejun Heo | 5a0e3ad | 2010-03-24 17:04:11 +0900 | [diff] [blame] | 14 | #include <linux/slab.h> | 
| Maxime Bizon | 553d6d5 | 2009-09-28 14:49:43 +0200 | [diff] [blame] | 15 | #include <linux/delay.h> | 
|  | 16 | #include <linux/pci.h> | 
|  | 17 | #include <linux/gpio.h> | 
|  | 18 |  | 
|  | 19 | #include <bcm63xx_regs.h> | 
|  | 20 | #include <bcm63xx_io.h> | 
|  | 21 | #include "bcm63xx_pcmcia.h" | 
|  | 22 |  | 
|  | 23 | #define PFX	"bcm63xx_pcmcia: " | 
|  | 24 |  | 
|  | 25 | #ifdef CONFIG_CARDBUS | 
|  | 26 | /* if cardbus is used, platform device needs reference to actual pci | 
|  | 27 | * device */ | 
|  | 28 | static struct pci_dev *bcm63xx_cb_dev; | 
|  | 29 | #endif | 
|  | 30 |  | 
|  | 31 | /* | 
|  | 32 | * read/write helper for pcmcia regs | 
|  | 33 | */ | 
|  | 34 | static inline u32 pcmcia_readl(struct bcm63xx_pcmcia_socket *skt, u32 off) | 
|  | 35 | { | 
|  | 36 | return bcm_readl(skt->base + off); | 
|  | 37 | } | 
|  | 38 |  | 
|  | 39 | static inline void pcmcia_writel(struct bcm63xx_pcmcia_socket *skt, | 
|  | 40 | u32 val, u32 off) | 
|  | 41 | { | 
|  | 42 | bcm_writel(val, skt->base + off); | 
|  | 43 | } | 
|  | 44 |  | 
|  | 45 | /* | 
|  | 46 | * This callback should (re-)initialise the socket, turn on status | 
|  | 47 | * interrupts and PCMCIA bus, and wait for power to stabilise so that | 
|  | 48 | * the card status signals report correctly. | 
|  | 49 | * | 
|  | 50 | * Hardware cannot do that. | 
|  | 51 | */ | 
|  | 52 | static int bcm63xx_pcmcia_sock_init(struct pcmcia_socket *sock) | 
|  | 53 | { | 
|  | 54 | return 0; | 
|  | 55 | } | 
|  | 56 |  | 
|  | 57 | /* | 
|  | 58 | * This callback should remove power on the socket, disable IRQs from | 
|  | 59 | * the card, turn off status interrupts, and disable the PCMCIA bus. | 
|  | 60 | * | 
|  | 61 | * Hardware cannot do that. | 
|  | 62 | */ | 
|  | 63 | static int bcm63xx_pcmcia_suspend(struct pcmcia_socket *sock) | 
|  | 64 | { | 
|  | 65 | return 0; | 
|  | 66 | } | 
|  | 67 |  | 
|  | 68 | /* | 
|  | 69 | * Implements the set_socket() operation for the in-kernel PCMCIA | 
|  | 70 | * service (formerly SS_SetSocket in Card Services). We more or | 
|  | 71 | * less punt all of this work and let the kernel handle the details | 
|  | 72 | * of power configuration, reset, &c. We also record the value of | 
|  | 73 | * `state' in order to regurgitate it to the PCMCIA core later. | 
|  | 74 | */ | 
|  | 75 | static int bcm63xx_pcmcia_set_socket(struct pcmcia_socket *sock, | 
|  | 76 | socket_state_t *state) | 
|  | 77 | { | 
|  | 78 | struct bcm63xx_pcmcia_socket *skt; | 
|  | 79 | unsigned long flags; | 
|  | 80 | u32 val; | 
|  | 81 |  | 
|  | 82 | skt = sock->driver_data; | 
|  | 83 |  | 
|  | 84 | spin_lock_irqsave(&skt->lock, flags); | 
|  | 85 |  | 
|  | 86 | /* note: hardware cannot control socket power, so we will | 
|  | 87 | * always report SS_POWERON */ | 
|  | 88 |  | 
|  | 89 | /* apply socket reset */ | 
|  | 90 | val = pcmcia_readl(skt, PCMCIA_C1_REG); | 
|  | 91 | if (state->flags & SS_RESET) | 
|  | 92 | val |= PCMCIA_C1_RESET_MASK; | 
|  | 93 | else | 
|  | 94 | val &= ~PCMCIA_C1_RESET_MASK; | 
|  | 95 |  | 
|  | 96 | /* reverse reset logic for cardbus card */ | 
|  | 97 | if (skt->card_detected && (skt->card_type & CARD_CARDBUS)) | 
|  | 98 | val ^= PCMCIA_C1_RESET_MASK; | 
|  | 99 |  | 
|  | 100 | pcmcia_writel(skt, val, PCMCIA_C1_REG); | 
|  | 101 |  | 
|  | 102 | /* keep requested state for event reporting */ | 
|  | 103 | skt->requested_state = *state; | 
|  | 104 |  | 
|  | 105 | spin_unlock_irqrestore(&skt->lock, flags); | 
|  | 106 |  | 
|  | 107 | return 0; | 
|  | 108 | } | 
|  | 109 |  | 
|  | 110 | /* | 
|  | 111 | * identity cardtype from VS[12] input, CD[12] input while only VS2 is | 
|  | 112 | * floating, and CD[12] input while only VS1 is floating | 
|  | 113 | */ | 
|  | 114 | enum { | 
|  | 115 | IN_VS1 = (1 << 0), | 
|  | 116 | IN_VS2 = (1 << 1), | 
|  | 117 | IN_CD1_VS2H = (1 << 2), | 
|  | 118 | IN_CD2_VS2H = (1 << 3), | 
|  | 119 | IN_CD1_VS1H = (1 << 4), | 
|  | 120 | IN_CD2_VS1H = (1 << 5), | 
|  | 121 | }; | 
|  | 122 |  | 
|  | 123 | static const u8 vscd_to_cardtype[] = { | 
|  | 124 |  | 
|  | 125 | /* VS1 float, VS2 float */ | 
|  | 126 | [IN_VS1 | IN_VS2] = (CARD_PCCARD | CARD_5V), | 
|  | 127 |  | 
|  | 128 | /* VS1 grounded, VS2 float */ | 
|  | 129 | [IN_VS2] = (CARD_PCCARD | CARD_5V | CARD_3V), | 
|  | 130 |  | 
|  | 131 | /* VS1 grounded, VS2 grounded */ | 
|  | 132 | [0] = (CARD_PCCARD | CARD_5V | CARD_3V | CARD_XV), | 
|  | 133 |  | 
|  | 134 | /* VS1 tied to CD1, VS2 float */ | 
|  | 135 | [IN_VS1 | IN_VS2 | IN_CD1_VS1H] = (CARD_CARDBUS | CARD_3V), | 
|  | 136 |  | 
|  | 137 | /* VS1 grounded, VS2 tied to CD2 */ | 
|  | 138 | [IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V | CARD_XV), | 
|  | 139 |  | 
|  | 140 | /* VS1 tied to CD2, VS2 grounded */ | 
|  | 141 | [IN_VS1 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_3V | CARD_XV | CARD_YV), | 
|  | 142 |  | 
|  | 143 | /* VS1 float, VS2 grounded */ | 
|  | 144 | [IN_VS1] = (CARD_PCCARD | CARD_XV), | 
|  | 145 |  | 
|  | 146 | /* VS1 float, VS2 tied to CD2 */ | 
|  | 147 | [IN_VS1 | IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V), | 
|  | 148 |  | 
|  | 149 | /* VS1 float, VS2 tied to CD1 */ | 
|  | 150 | [IN_VS1 | IN_VS2 | IN_CD1_VS2H] = (CARD_CARDBUS | CARD_XV | CARD_YV), | 
|  | 151 |  | 
|  | 152 | /* VS1 tied to CD2, VS2 float */ | 
|  | 153 | [IN_VS1 | IN_VS2 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_YV), | 
|  | 154 |  | 
|  | 155 | /* VS2 grounded, VS1 is tied to CD1, CD2 is grounded */ | 
|  | 156 | [IN_VS1 | IN_CD1_VS1H] = 0, /* ignore cardbay */ | 
|  | 157 | }; | 
|  | 158 |  | 
|  | 159 | /* | 
|  | 160 | * poll hardware to check card insertion status | 
|  | 161 | */ | 
|  | 162 | static unsigned int __get_socket_status(struct bcm63xx_pcmcia_socket *skt) | 
|  | 163 | { | 
|  | 164 | unsigned int stat; | 
|  | 165 | u32 val; | 
|  | 166 |  | 
|  | 167 | stat = 0; | 
|  | 168 |  | 
|  | 169 | /* check CD for card presence */ | 
|  | 170 | val = pcmcia_readl(skt, PCMCIA_C1_REG); | 
|  | 171 |  | 
|  | 172 | if (!(val & PCMCIA_C1_CD1_MASK) && !(val & PCMCIA_C1_CD2_MASK)) | 
|  | 173 | stat |= SS_DETECT; | 
|  | 174 |  | 
|  | 175 | /* if new insertion, detect cardtype */ | 
|  | 176 | if ((stat & SS_DETECT) && !skt->card_detected) { | 
|  | 177 | unsigned int stat = 0; | 
|  | 178 |  | 
|  | 179 | /* float VS1, float VS2 */ | 
|  | 180 | val |= PCMCIA_C1_VS1OE_MASK; | 
|  | 181 | val |= PCMCIA_C1_VS2OE_MASK; | 
|  | 182 | pcmcia_writel(skt, val, PCMCIA_C1_REG); | 
|  | 183 |  | 
|  | 184 | /* wait for output to stabilize and read VS[12] */ | 
|  | 185 | udelay(10); | 
|  | 186 | val = pcmcia_readl(skt, PCMCIA_C1_REG); | 
|  | 187 | stat |= (val & PCMCIA_C1_VS1_MASK) ? IN_VS1 : 0; | 
|  | 188 | stat |= (val & PCMCIA_C1_VS2_MASK) ? IN_VS2 : 0; | 
|  | 189 |  | 
|  | 190 | /* drive VS1 low, float VS2 */ | 
|  | 191 | val &= ~PCMCIA_C1_VS1OE_MASK; | 
|  | 192 | val |= PCMCIA_C1_VS2OE_MASK; | 
|  | 193 | pcmcia_writel(skt, val, PCMCIA_C1_REG); | 
|  | 194 |  | 
|  | 195 | /* wait for output to stabilize and read CD[12] */ | 
|  | 196 | udelay(10); | 
|  | 197 | val = pcmcia_readl(skt, PCMCIA_C1_REG); | 
|  | 198 | stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS2H : 0; | 
|  | 199 | stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS2H : 0; | 
|  | 200 |  | 
|  | 201 | /* float VS1, drive VS2 low */ | 
|  | 202 | val |= PCMCIA_C1_VS1OE_MASK; | 
|  | 203 | val &= ~PCMCIA_C1_VS2OE_MASK; | 
|  | 204 | pcmcia_writel(skt, val, PCMCIA_C1_REG); | 
|  | 205 |  | 
|  | 206 | /* wait for output to stabilize and read CD[12] */ | 
|  | 207 | udelay(10); | 
|  | 208 | val = pcmcia_readl(skt, PCMCIA_C1_REG); | 
|  | 209 | stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS1H : 0; | 
|  | 210 | stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS1H : 0; | 
|  | 211 |  | 
|  | 212 | /* guess cardtype from all this */ | 
|  | 213 | skt->card_type = vscd_to_cardtype[stat]; | 
|  | 214 | if (!skt->card_type) | 
|  | 215 | dev_err(&skt->socket.dev, "unsupported card type\n"); | 
|  | 216 |  | 
|  | 217 | /* drive both VS pin to 0 again */ | 
|  | 218 | val &= ~(PCMCIA_C1_VS1OE_MASK | PCMCIA_C1_VS2OE_MASK); | 
|  | 219 |  | 
|  | 220 | /* enable correct logic */ | 
|  | 221 | val &= ~(PCMCIA_C1_EN_PCMCIA_MASK | PCMCIA_C1_EN_CARDBUS_MASK); | 
|  | 222 | if (skt->card_type & CARD_PCCARD) | 
|  | 223 | val |= PCMCIA_C1_EN_PCMCIA_MASK; | 
|  | 224 | else | 
|  | 225 | val |= PCMCIA_C1_EN_CARDBUS_MASK; | 
|  | 226 |  | 
|  | 227 | pcmcia_writel(skt, val, PCMCIA_C1_REG); | 
|  | 228 | } | 
|  | 229 | skt->card_detected = (stat & SS_DETECT) ? 1 : 0; | 
|  | 230 |  | 
|  | 231 | /* report card type/voltage */ | 
|  | 232 | if (skt->card_type & CARD_CARDBUS) | 
|  | 233 | stat |= SS_CARDBUS; | 
|  | 234 | if (skt->card_type & CARD_3V) | 
|  | 235 | stat |= SS_3VCARD; | 
|  | 236 | if (skt->card_type & CARD_XV) | 
|  | 237 | stat |= SS_XVCARD; | 
|  | 238 | stat |= SS_POWERON; | 
|  | 239 |  | 
|  | 240 | if (gpio_get_value(skt->pd->ready_gpio)) | 
|  | 241 | stat |= SS_READY; | 
|  | 242 |  | 
|  | 243 | return stat; | 
|  | 244 | } | 
|  | 245 |  | 
|  | 246 | /* | 
|  | 247 | * core request to get current socket status | 
|  | 248 | */ | 
|  | 249 | static int bcm63xx_pcmcia_get_status(struct pcmcia_socket *sock, | 
|  | 250 | unsigned int *status) | 
|  | 251 | { | 
|  | 252 | struct bcm63xx_pcmcia_socket *skt; | 
|  | 253 |  | 
|  | 254 | skt = sock->driver_data; | 
|  | 255 |  | 
|  | 256 | spin_lock_bh(&skt->lock); | 
|  | 257 | *status = __get_socket_status(skt); | 
|  | 258 | spin_unlock_bh(&skt->lock); | 
|  | 259 |  | 
|  | 260 | return 0; | 
|  | 261 | } | 
|  | 262 |  | 
|  | 263 | /* | 
|  | 264 | * socket polling timer callback | 
|  | 265 | */ | 
|  | 266 | static void bcm63xx_pcmcia_poll(unsigned long data) | 
|  | 267 | { | 
|  | 268 | struct bcm63xx_pcmcia_socket *skt; | 
|  | 269 | unsigned int stat, events; | 
|  | 270 |  | 
|  | 271 | skt = (struct bcm63xx_pcmcia_socket *)data; | 
|  | 272 |  | 
|  | 273 | spin_lock_bh(&skt->lock); | 
|  | 274 |  | 
|  | 275 | stat = __get_socket_status(skt); | 
|  | 276 |  | 
|  | 277 | /* keep only changed bits, and mask with required one from the | 
|  | 278 | * core */ | 
|  | 279 | events = (stat ^ skt->old_status) & skt->requested_state.csc_mask; | 
|  | 280 | skt->old_status = stat; | 
|  | 281 | spin_unlock_bh(&skt->lock); | 
|  | 282 |  | 
|  | 283 | if (events) | 
|  | 284 | pcmcia_parse_events(&skt->socket, events); | 
|  | 285 |  | 
|  | 286 | mod_timer(&skt->timer, | 
|  | 287 | jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE)); | 
|  | 288 | } | 
|  | 289 |  | 
|  | 290 | static int bcm63xx_pcmcia_set_io_map(struct pcmcia_socket *sock, | 
|  | 291 | struct pccard_io_map *map) | 
|  | 292 | { | 
|  | 293 | /* this doesn't seem to be called by pcmcia layer if static | 
|  | 294 | * mapping is used */ | 
|  | 295 | return 0; | 
|  | 296 | } | 
|  | 297 |  | 
|  | 298 | static int bcm63xx_pcmcia_set_mem_map(struct pcmcia_socket *sock, | 
|  | 299 | struct pccard_mem_map *map) | 
|  | 300 | { | 
|  | 301 | struct bcm63xx_pcmcia_socket *skt; | 
|  | 302 | struct resource *res; | 
|  | 303 |  | 
|  | 304 | skt = sock->driver_data; | 
|  | 305 | if (map->flags & MAP_ATTRIB) | 
|  | 306 | res = skt->attr_res; | 
|  | 307 | else | 
|  | 308 | res = skt->common_res; | 
|  | 309 |  | 
|  | 310 | map->static_start = res->start + map->card_start; | 
|  | 311 | return 0; | 
|  | 312 | } | 
|  | 313 |  | 
|  | 314 | static struct pccard_operations bcm63xx_pcmcia_operations = { | 
|  | 315 | .init			= bcm63xx_pcmcia_sock_init, | 
|  | 316 | .suspend		= bcm63xx_pcmcia_suspend, | 
|  | 317 | .get_status		= bcm63xx_pcmcia_get_status, | 
|  | 318 | .set_socket		= bcm63xx_pcmcia_set_socket, | 
|  | 319 | .set_io_map		= bcm63xx_pcmcia_set_io_map, | 
|  | 320 | .set_mem_map		= bcm63xx_pcmcia_set_mem_map, | 
|  | 321 | }; | 
|  | 322 |  | 
|  | 323 | /* | 
|  | 324 | * register pcmcia socket to core | 
|  | 325 | */ | 
|  | 326 | static int __devinit bcm63xx_drv_pcmcia_probe(struct platform_device *pdev) | 
|  | 327 | { | 
|  | 328 | struct bcm63xx_pcmcia_socket *skt; | 
|  | 329 | struct pcmcia_socket *sock; | 
|  | 330 | struct resource *res, *irq_res; | 
|  | 331 | unsigned int regmem_size = 0, iomem_size = 0; | 
|  | 332 | u32 val; | 
|  | 333 | int ret; | 
|  | 334 |  | 
|  | 335 | skt = kzalloc(sizeof(*skt), GFP_KERNEL); | 
|  | 336 | if (!skt) | 
|  | 337 | return -ENOMEM; | 
|  | 338 | spin_lock_init(&skt->lock); | 
|  | 339 | sock = &skt->socket; | 
|  | 340 | sock->driver_data = skt; | 
|  | 341 |  | 
|  | 342 | /* make sure we have all resources we need */ | 
|  | 343 | skt->common_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); | 
|  | 344 | skt->attr_res = platform_get_resource(pdev, IORESOURCE_MEM, 2); | 
|  | 345 | irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | 
|  | 346 | skt->pd = pdev->dev.platform_data; | 
|  | 347 | if (!skt->common_res || !skt->attr_res || !irq_res || !skt->pd) { | 
|  | 348 | ret = -EINVAL; | 
|  | 349 | goto err; | 
|  | 350 | } | 
|  | 351 |  | 
|  | 352 | /* remap pcmcia registers */ | 
|  | 353 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | 354 | regmem_size = resource_size(res); | 
|  | 355 | if (!request_mem_region(res->start, regmem_size, "bcm63xx_pcmcia")) { | 
|  | 356 | ret = -EINVAL; | 
|  | 357 | goto err; | 
|  | 358 | } | 
|  | 359 | skt->reg_res = res; | 
|  | 360 |  | 
|  | 361 | skt->base = ioremap(res->start, regmem_size); | 
|  | 362 | if (!skt->base) { | 
|  | 363 | ret = -ENOMEM; | 
|  | 364 | goto err; | 
|  | 365 | } | 
|  | 366 |  | 
|  | 367 | /* remap io registers */ | 
|  | 368 | res = platform_get_resource(pdev, IORESOURCE_MEM, 3); | 
|  | 369 | iomem_size = resource_size(res); | 
|  | 370 | skt->io_base = ioremap(res->start, iomem_size); | 
|  | 371 | if (!skt->io_base) { | 
|  | 372 | ret = -ENOMEM; | 
|  | 373 | goto err; | 
|  | 374 | } | 
|  | 375 |  | 
|  | 376 | /* resources are static */ | 
|  | 377 | sock->resource_ops = &pccard_static_ops; | 
|  | 378 | sock->ops = &bcm63xx_pcmcia_operations; | 
|  | 379 | sock->owner = THIS_MODULE; | 
|  | 380 | sock->dev.parent = &pdev->dev; | 
|  | 381 | sock->features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD; | 
|  | 382 | sock->io_offset = (unsigned long)skt->io_base; | 
|  | 383 | sock->pci_irq = irq_res->start; | 
|  | 384 |  | 
|  | 385 | #ifdef CONFIG_CARDBUS | 
|  | 386 | sock->cb_dev = bcm63xx_cb_dev; | 
|  | 387 | if (bcm63xx_cb_dev) | 
|  | 388 | sock->features |= SS_CAP_CARDBUS; | 
|  | 389 | #endif | 
|  | 390 |  | 
|  | 391 | /* assume common & attribute memory have the same size */ | 
|  | 392 | sock->map_size = resource_size(skt->common_res); | 
|  | 393 |  | 
|  | 394 | /* initialize polling timer */ | 
|  | 395 | setup_timer(&skt->timer, bcm63xx_pcmcia_poll, (unsigned long)skt); | 
|  | 396 |  | 
|  | 397 | /* initialize  pcmcia  control register,  drive  VS[12] to  0, | 
|  | 398 | * leave CB IDSEL to the old  value since it is set by the PCI | 
|  | 399 | * layer */ | 
|  | 400 | val = pcmcia_readl(skt, PCMCIA_C1_REG); | 
|  | 401 | val &= PCMCIA_C1_CBIDSEL_MASK; | 
|  | 402 | val |= PCMCIA_C1_EN_PCMCIA_GPIO_MASK; | 
|  | 403 | pcmcia_writel(skt, val, PCMCIA_C1_REG); | 
|  | 404 |  | 
|  | 405 | /* | 
|  | 406 | * Hardware has only one set of timings registers, not one for | 
|  | 407 | * each memory access type, so we configure them for the | 
|  | 408 | * slowest one: attribute memory. | 
|  | 409 | */ | 
|  | 410 | val = PCMCIA_C2_DATA16_MASK; | 
|  | 411 | val |= 10 << PCMCIA_C2_RWCOUNT_SHIFT; | 
|  | 412 | val |= 6 << PCMCIA_C2_INACTIVE_SHIFT; | 
|  | 413 | val |= 3 << PCMCIA_C2_SETUP_SHIFT; | 
|  | 414 | val |= 3 << PCMCIA_C2_HOLD_SHIFT; | 
|  | 415 | pcmcia_writel(skt, val, PCMCIA_C2_REG); | 
|  | 416 |  | 
|  | 417 | ret = pcmcia_register_socket(sock); | 
|  | 418 | if (ret) | 
|  | 419 | goto err; | 
|  | 420 |  | 
|  | 421 | /* start polling socket */ | 
|  | 422 | mod_timer(&skt->timer, | 
|  | 423 | jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE)); | 
|  | 424 |  | 
|  | 425 | platform_set_drvdata(pdev, skt); | 
|  | 426 | return 0; | 
|  | 427 |  | 
|  | 428 | err: | 
|  | 429 | if (skt->io_base) | 
|  | 430 | iounmap(skt->io_base); | 
|  | 431 | if (skt->base) | 
|  | 432 | iounmap(skt->base); | 
|  | 433 | if (skt->reg_res) | 
|  | 434 | release_mem_region(skt->reg_res->start, regmem_size); | 
|  | 435 | kfree(skt); | 
|  | 436 | return ret; | 
|  | 437 | } | 
|  | 438 |  | 
|  | 439 | static int __devexit bcm63xx_drv_pcmcia_remove(struct platform_device *pdev) | 
|  | 440 | { | 
|  | 441 | struct bcm63xx_pcmcia_socket *skt; | 
|  | 442 | struct resource *res; | 
|  | 443 |  | 
|  | 444 | skt = platform_get_drvdata(pdev); | 
|  | 445 | del_timer_sync(&skt->timer); | 
|  | 446 | iounmap(skt->base); | 
|  | 447 | iounmap(skt->io_base); | 
|  | 448 | res = skt->reg_res; | 
|  | 449 | release_mem_region(res->start, resource_size(res)); | 
|  | 450 | kfree(skt); | 
|  | 451 | return 0; | 
|  | 452 | } | 
|  | 453 |  | 
|  | 454 | struct platform_driver bcm63xx_pcmcia_driver = { | 
|  | 455 | .probe	= bcm63xx_drv_pcmcia_probe, | 
|  | 456 | .remove	= __devexit_p(bcm63xx_drv_pcmcia_remove), | 
|  | 457 | .driver	= { | 
|  | 458 | .name	= "bcm63xx_pcmcia", | 
|  | 459 | .owner  = THIS_MODULE, | 
|  | 460 | }, | 
|  | 461 | }; | 
|  | 462 |  | 
|  | 463 | #ifdef CONFIG_CARDBUS | 
|  | 464 | static int __devinit bcm63xx_cb_probe(struct pci_dev *dev, | 
|  | 465 | const struct pci_device_id *id) | 
|  | 466 | { | 
|  | 467 | /* keep pci device */ | 
|  | 468 | bcm63xx_cb_dev = dev; | 
|  | 469 | return platform_driver_register(&bcm63xx_pcmcia_driver); | 
|  | 470 | } | 
|  | 471 |  | 
|  | 472 | static void __devexit bcm63xx_cb_exit(struct pci_dev *dev) | 
|  | 473 | { | 
|  | 474 | platform_driver_unregister(&bcm63xx_pcmcia_driver); | 
|  | 475 | bcm63xx_cb_dev = NULL; | 
|  | 476 | } | 
|  | 477 |  | 
|  | 478 | static struct pci_device_id bcm63xx_cb_table[] = { | 
|  | 479 | { | 
|  | 480 | .vendor		= PCI_VENDOR_ID_BROADCOM, | 
|  | 481 | .device		= BCM6348_CPU_ID, | 
|  | 482 | .subvendor	= PCI_VENDOR_ID_BROADCOM, | 
|  | 483 | .subdevice	= PCI_ANY_ID, | 
|  | 484 | .class		= PCI_CLASS_BRIDGE_CARDBUS << 8, | 
|  | 485 | .class_mask	= ~0, | 
|  | 486 | }, | 
|  | 487 |  | 
|  | 488 | { | 
|  | 489 | .vendor		= PCI_VENDOR_ID_BROADCOM, | 
|  | 490 | .device		= BCM6358_CPU_ID, | 
|  | 491 | .subvendor	= PCI_VENDOR_ID_BROADCOM, | 
|  | 492 | .subdevice	= PCI_ANY_ID, | 
|  | 493 | .class		= PCI_CLASS_BRIDGE_CARDBUS << 8, | 
|  | 494 | .class_mask	= ~0, | 
|  | 495 | }, | 
|  | 496 |  | 
|  | 497 | { }, | 
|  | 498 | }; | 
|  | 499 |  | 
|  | 500 | MODULE_DEVICE_TABLE(pci, bcm63xx_cb_table); | 
|  | 501 |  | 
|  | 502 | static struct pci_driver bcm63xx_cardbus_driver = { | 
|  | 503 | .name		= "bcm63xx_cardbus", | 
|  | 504 | .id_table	= bcm63xx_cb_table, | 
|  | 505 | .probe		= bcm63xx_cb_probe, | 
|  | 506 | .remove		= __devexit_p(bcm63xx_cb_exit), | 
|  | 507 | }; | 
|  | 508 | #endif | 
|  | 509 |  | 
|  | 510 | /* | 
|  | 511 | * if cardbus support is enabled, register our platform device after | 
|  | 512 | * our fake cardbus bridge has been registered | 
|  | 513 | */ | 
|  | 514 | static int __init bcm63xx_pcmcia_init(void) | 
|  | 515 | { | 
|  | 516 | #ifdef CONFIG_CARDBUS | 
|  | 517 | return pci_register_driver(&bcm63xx_cardbus_driver); | 
|  | 518 | #else | 
|  | 519 | return platform_driver_register(&bcm63xx_pcmcia_driver); | 
|  | 520 | #endif | 
|  | 521 | } | 
|  | 522 |  | 
|  | 523 | static void __exit bcm63xx_pcmcia_exit(void) | 
|  | 524 | { | 
|  | 525 | #ifdef CONFIG_CARDBUS | 
|  | 526 | return pci_unregister_driver(&bcm63xx_cardbus_driver); | 
|  | 527 | #else | 
|  | 528 | platform_driver_unregister(&bcm63xx_pcmcia_driver); | 
|  | 529 | #endif | 
|  | 530 | } | 
|  | 531 |  | 
|  | 532 | module_init(bcm63xx_pcmcia_init); | 
|  | 533 | module_exit(bcm63xx_pcmcia_exit); | 
|  | 534 |  | 
|  | 535 | MODULE_LICENSE("GPL"); | 
|  | 536 | MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>"); | 
|  | 537 | MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm63xx Socket Controller"); |