| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* | 
|  | 2 | *  linux/drivers/ide/ide-disk.c	Version 1.18	Mar 05, 2003 | 
|  | 3 | * | 
|  | 4 | *  Copyright (C) 1994-1998  Linus Torvalds & authors (see below) | 
|  | 5 | *  Copyright (C) 1998-2002  Linux ATA Development | 
|  | 6 | *				Andre Hedrick <andre@linux-ide.org> | 
|  | 7 | *  Copyright (C) 2003	     Red Hat <alan@redhat.com> | 
|  | 8 | */ | 
|  | 9 |  | 
|  | 10 | /* | 
|  | 11 | *  Mostly written by Mark Lord <mlord@pobox.com> | 
|  | 12 | *                and Gadi Oxman <gadio@netvision.net.il> | 
|  | 13 | *                and Andre Hedrick <andre@linux-ide.org> | 
|  | 14 | * | 
|  | 15 | * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c. | 
|  | 16 | * | 
|  | 17 | * Version 1.00		move disk only code from ide.c to ide-disk.c | 
|  | 18 | *			support optional byte-swapping of all data | 
|  | 19 | * Version 1.01		fix previous byte-swapping code | 
|  | 20 | * Version 1.02		remove ", LBA" from drive identification msgs | 
|  | 21 | * Version 1.03		fix display of id->buf_size for big-endian | 
|  | 22 | * Version 1.04		add /proc configurable settings and S.M.A.R.T support | 
|  | 23 | * Version 1.05		add capacity support for ATA3 >= 8GB | 
|  | 24 | * Version 1.06		get boot-up messages to show full cyl count | 
|  | 25 | * Version 1.07		disable door-locking if it fails | 
|  | 26 | * Version 1.08		fixed CHS/LBA translations for ATA4 > 8GB, | 
|  | 27 | *			process of adding new ATA4 compliance. | 
|  | 28 | *			fixed problems in allowing fdisk to see | 
|  | 29 | *			the entire disk. | 
|  | 30 | * Version 1.09		added increment of rq->sector in ide_multwrite | 
|  | 31 | *			added UDMA 3/4 reporting | 
|  | 32 | * Version 1.10		request queue changes, Ultra DMA 100 | 
|  | 33 | * Version 1.11		added 48-bit lba | 
|  | 34 | * Version 1.12		adding taskfile io access method | 
|  | 35 | * Version 1.13		added standby and flush-cache for notifier | 
|  | 36 | * Version 1.14		added acoustic-wcache | 
|  | 37 | * Version 1.15		convert all calls to ide_raw_taskfile | 
|  | 38 | *				since args will return register content. | 
|  | 39 | * Version 1.16		added suspend-resume-checkpower | 
|  | 40 | * Version 1.17		do flush on standy, do flush on ATA < ATA6 | 
|  | 41 | *			fix wcache setup. | 
|  | 42 | */ | 
|  | 43 |  | 
|  | 44 | #define IDEDISK_VERSION	"1.18" | 
|  | 45 |  | 
|  | 46 | #undef REALLY_SLOW_IO		/* most systems can safely undef this */ | 
|  | 47 |  | 
|  | 48 | //#define DEBUG | 
|  | 49 |  | 
|  | 50 | #include <linux/config.h> | 
|  | 51 | #include <linux/module.h> | 
|  | 52 | #include <linux/types.h> | 
|  | 53 | #include <linux/string.h> | 
|  | 54 | #include <linux/kernel.h> | 
|  | 55 | #include <linux/timer.h> | 
|  | 56 | #include <linux/mm.h> | 
|  | 57 | #include <linux/interrupt.h> | 
|  | 58 | #include <linux/major.h> | 
|  | 59 | #include <linux/errno.h> | 
|  | 60 | #include <linux/genhd.h> | 
|  | 61 | #include <linux/slab.h> | 
|  | 62 | #include <linux/delay.h> | 
|  | 63 |  | 
|  | 64 | #define _IDE_DISK | 
|  | 65 |  | 
|  | 66 | #include <linux/ide.h> | 
|  | 67 |  | 
|  | 68 | #include <asm/byteorder.h> | 
|  | 69 | #include <asm/irq.h> | 
|  | 70 | #include <asm/uaccess.h> | 
|  | 71 | #include <asm/io.h> | 
|  | 72 | #include <asm/div64.h> | 
|  | 73 |  | 
|  | 74 | struct ide_disk_obj { | 
|  | 75 | ide_drive_t	*drive; | 
|  | 76 | ide_driver_t	*driver; | 
|  | 77 | struct gendisk	*disk; | 
|  | 78 | struct kref	kref; | 
|  | 79 | }; | 
|  | 80 |  | 
|  | 81 | static DECLARE_MUTEX(idedisk_ref_sem); | 
|  | 82 |  | 
|  | 83 | #define to_ide_disk(obj) container_of(obj, struct ide_disk_obj, kref) | 
|  | 84 |  | 
|  | 85 | #define ide_disk_g(disk) \ | 
|  | 86 | container_of((disk)->private_data, struct ide_disk_obj, driver) | 
|  | 87 |  | 
|  | 88 | static struct ide_disk_obj *ide_disk_get(struct gendisk *disk) | 
|  | 89 | { | 
|  | 90 | struct ide_disk_obj *idkp = NULL; | 
|  | 91 |  | 
|  | 92 | down(&idedisk_ref_sem); | 
|  | 93 | idkp = ide_disk_g(disk); | 
|  | 94 | if (idkp) | 
|  | 95 | kref_get(&idkp->kref); | 
|  | 96 | up(&idedisk_ref_sem); | 
|  | 97 | return idkp; | 
|  | 98 | } | 
|  | 99 |  | 
|  | 100 | static void ide_disk_release(struct kref *); | 
|  | 101 |  | 
|  | 102 | static void ide_disk_put(struct ide_disk_obj *idkp) | 
|  | 103 | { | 
|  | 104 | down(&idedisk_ref_sem); | 
|  | 105 | kref_put(&idkp->kref, ide_disk_release); | 
|  | 106 | up(&idedisk_ref_sem); | 
|  | 107 | } | 
|  | 108 |  | 
|  | 109 | /* | 
|  | 110 | * lba_capacity_is_ok() performs a sanity check on the claimed "lba_capacity" | 
|  | 111 | * value for this drive (from its reported identification information). | 
|  | 112 | * | 
|  | 113 | * Returns:	1 if lba_capacity looks sensible | 
|  | 114 | *		0 otherwise | 
|  | 115 | * | 
|  | 116 | * It is called only once for each drive. | 
|  | 117 | */ | 
|  | 118 | static int lba_capacity_is_ok (struct hd_driveid *id) | 
|  | 119 | { | 
|  | 120 | unsigned long lba_sects, chs_sects, head, tail; | 
|  | 121 |  | 
| Alan Cox | 6efd936 | 2005-06-27 15:24:22 -0700 | [diff] [blame] | 122 | /* No non-LBA info .. so valid! */ | 
|  | 123 | if (id->cyls == 0) | 
|  | 124 | return 1; | 
|  | 125 |  | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 126 | /* | 
|  | 127 | * The ATA spec tells large drives to return | 
|  | 128 | * C/H/S = 16383/16/63 independent of their size. | 
|  | 129 | * Some drives can be jumpered to use 15 heads instead of 16. | 
|  | 130 | * Some drives can be jumpered to use 4092 cyls instead of 16383. | 
|  | 131 | */ | 
|  | 132 | if ((id->cyls == 16383 | 
|  | 133 | || (id->cyls == 4092 && id->cur_cyls == 16383)) && | 
|  | 134 | id->sectors == 63 && | 
|  | 135 | (id->heads == 15 || id->heads == 16) && | 
|  | 136 | (id->lba_capacity >= 16383*63*id->heads)) | 
|  | 137 | return 1; | 
|  | 138 |  | 
|  | 139 | lba_sects   = id->lba_capacity; | 
|  | 140 | chs_sects   = id->cyls * id->heads * id->sectors; | 
|  | 141 |  | 
|  | 142 | /* perform a rough sanity check on lba_sects:  within 10% is OK */ | 
|  | 143 | if ((lba_sects - chs_sects) < chs_sects/10) | 
|  | 144 | return 1; | 
|  | 145 |  | 
|  | 146 | /* some drives have the word order reversed */ | 
|  | 147 | head = ((lba_sects >> 16) & 0xffff); | 
|  | 148 | tail = (lba_sects & 0xffff); | 
|  | 149 | lba_sects = (head | (tail << 16)); | 
|  | 150 | if ((lba_sects - chs_sects) < chs_sects/10) { | 
|  | 151 | id->lba_capacity = lba_sects; | 
|  | 152 | return 1;	/* lba_capacity is (now) good */ | 
|  | 153 | } | 
|  | 154 |  | 
|  | 155 | return 0;	/* lba_capacity value may be bad */ | 
|  | 156 | } | 
|  | 157 |  | 
|  | 158 | /* | 
|  | 159 | * __ide_do_rw_disk() issues READ and WRITE commands to a disk, | 
|  | 160 | * using LBA if supported, or CHS otherwise, to address sectors. | 
|  | 161 | */ | 
|  | 162 | static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, sector_t block) | 
|  | 163 | { | 
|  | 164 | ide_hwif_t *hwif	= HWIF(drive); | 
|  | 165 | unsigned int dma	= drive->using_dma; | 
|  | 166 | u8 lba48		= (drive->addressing == 1) ? 1 : 0; | 
|  | 167 | task_ioreg_t command	= WIN_NOP; | 
|  | 168 | ata_nsector_t		nsectors; | 
|  | 169 |  | 
|  | 170 | nsectors.all		= (u16) rq->nr_sectors; | 
|  | 171 |  | 
|  | 172 | if (hwif->no_lba48_dma && lba48 && dma) { | 
|  | 173 | if (block + rq->nr_sectors > 1ULL << 28) | 
|  | 174 | dma = 0; | 
|  | 175 | else | 
|  | 176 | lba48 = 0; | 
|  | 177 | } | 
|  | 178 |  | 
|  | 179 | if (!dma) { | 
|  | 180 | ide_init_sg_cmd(drive, rq); | 
|  | 181 | ide_map_sg(drive, rq); | 
|  | 182 | } | 
|  | 183 |  | 
|  | 184 | if (IDE_CONTROL_REG) | 
|  | 185 | hwif->OUTB(drive->ctl, IDE_CONTROL_REG); | 
|  | 186 |  | 
|  | 187 | /* FIXME: SELECT_MASK(drive, 0) ? */ | 
|  | 188 |  | 
|  | 189 | if (drive->select.b.lba) { | 
|  | 190 | if (lba48) { | 
|  | 191 | task_ioreg_t tasklets[10]; | 
|  | 192 |  | 
|  | 193 | pr_debug("%s: LBA=0x%012llx\n", drive->name, block); | 
|  | 194 |  | 
|  | 195 | tasklets[0] = 0; | 
|  | 196 | tasklets[1] = 0; | 
|  | 197 | tasklets[2] = nsectors.b.low; | 
|  | 198 | tasklets[3] = nsectors.b.high; | 
|  | 199 | tasklets[4] = (task_ioreg_t) block; | 
|  | 200 | tasklets[5] = (task_ioreg_t) (block>>8); | 
|  | 201 | tasklets[6] = (task_ioreg_t) (block>>16); | 
|  | 202 | tasklets[7] = (task_ioreg_t) (block>>24); | 
|  | 203 | if (sizeof(block) == 4) { | 
|  | 204 | tasklets[8] = (task_ioreg_t) 0; | 
|  | 205 | tasklets[9] = (task_ioreg_t) 0; | 
|  | 206 | } else { | 
|  | 207 | tasklets[8] = (task_ioreg_t)((u64)block >> 32); | 
|  | 208 | tasklets[9] = (task_ioreg_t)((u64)block >> 40); | 
|  | 209 | } | 
|  | 210 | #ifdef DEBUG | 
|  | 211 | printk("%s: 0x%02x%02x 0x%02x%02x%02x%02x%02x%02x\n", | 
|  | 212 | drive->name, tasklets[3], tasklets[2], | 
|  | 213 | tasklets[9], tasklets[8], tasklets[7], | 
|  | 214 | tasklets[6], tasklets[5], tasklets[4]); | 
|  | 215 | #endif | 
|  | 216 | hwif->OUTB(tasklets[1], IDE_FEATURE_REG); | 
|  | 217 | hwif->OUTB(tasklets[3], IDE_NSECTOR_REG); | 
|  | 218 | hwif->OUTB(tasklets[7], IDE_SECTOR_REG); | 
|  | 219 | hwif->OUTB(tasklets[8], IDE_LCYL_REG); | 
|  | 220 | hwif->OUTB(tasklets[9], IDE_HCYL_REG); | 
|  | 221 |  | 
|  | 222 | hwif->OUTB(tasklets[0], IDE_FEATURE_REG); | 
|  | 223 | hwif->OUTB(tasklets[2], IDE_NSECTOR_REG); | 
|  | 224 | hwif->OUTB(tasklets[4], IDE_SECTOR_REG); | 
|  | 225 | hwif->OUTB(tasklets[5], IDE_LCYL_REG); | 
|  | 226 | hwif->OUTB(tasklets[6], IDE_HCYL_REG); | 
|  | 227 | hwif->OUTB(0x00|drive->select.all,IDE_SELECT_REG); | 
|  | 228 | } else { | 
|  | 229 | hwif->OUTB(0x00, IDE_FEATURE_REG); | 
|  | 230 | hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG); | 
|  | 231 | hwif->OUTB(block, IDE_SECTOR_REG); | 
|  | 232 | hwif->OUTB(block>>=8, IDE_LCYL_REG); | 
|  | 233 | hwif->OUTB(block>>=8, IDE_HCYL_REG); | 
|  | 234 | hwif->OUTB(((block>>8)&0x0f)|drive->select.all,IDE_SELECT_REG); | 
|  | 235 | } | 
|  | 236 | } else { | 
|  | 237 | unsigned int sect,head,cyl,track; | 
|  | 238 | track = (int)block / drive->sect; | 
|  | 239 | sect  = (int)block % drive->sect + 1; | 
|  | 240 | hwif->OUTB(sect, IDE_SECTOR_REG); | 
|  | 241 | head  = track % drive->head; | 
|  | 242 | cyl   = track / drive->head; | 
|  | 243 |  | 
|  | 244 | pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect); | 
|  | 245 |  | 
|  | 246 | hwif->OUTB(0x00, IDE_FEATURE_REG); | 
|  | 247 | hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG); | 
|  | 248 | hwif->OUTB(cyl, IDE_LCYL_REG); | 
|  | 249 | hwif->OUTB(cyl>>8, IDE_HCYL_REG); | 
|  | 250 | hwif->OUTB(head|drive->select.all,IDE_SELECT_REG); | 
|  | 251 | } | 
|  | 252 |  | 
|  | 253 | if (dma) { | 
|  | 254 | if (!hwif->dma_setup(drive)) { | 
|  | 255 | if (rq_data_dir(rq)) { | 
|  | 256 | command = lba48 ? WIN_WRITEDMA_EXT : WIN_WRITEDMA; | 
|  | 257 | if (drive->vdma) | 
|  | 258 | command = lba48 ? WIN_WRITE_EXT: WIN_WRITE; | 
|  | 259 | } else { | 
|  | 260 | command = lba48 ? WIN_READDMA_EXT : WIN_READDMA; | 
|  | 261 | if (drive->vdma) | 
|  | 262 | command = lba48 ? WIN_READ_EXT: WIN_READ; | 
|  | 263 | } | 
|  | 264 | hwif->dma_exec_cmd(drive, command); | 
|  | 265 | hwif->dma_start(drive); | 
|  | 266 | return ide_started; | 
|  | 267 | } | 
|  | 268 | /* fallback to PIO */ | 
|  | 269 | ide_init_sg_cmd(drive, rq); | 
|  | 270 | } | 
|  | 271 |  | 
|  | 272 | if (rq_data_dir(rq) == READ) { | 
|  | 273 |  | 
|  | 274 | if (drive->mult_count) { | 
|  | 275 | hwif->data_phase = TASKFILE_MULTI_IN; | 
|  | 276 | command = lba48 ? WIN_MULTREAD_EXT : WIN_MULTREAD; | 
|  | 277 | } else { | 
|  | 278 | hwif->data_phase = TASKFILE_IN; | 
|  | 279 | command = lba48 ? WIN_READ_EXT : WIN_READ; | 
|  | 280 | } | 
|  | 281 |  | 
|  | 282 | ide_execute_command(drive, command, &task_in_intr, WAIT_CMD, NULL); | 
|  | 283 | return ide_started; | 
|  | 284 | } else { | 
|  | 285 | if (drive->mult_count) { | 
|  | 286 | hwif->data_phase = TASKFILE_MULTI_OUT; | 
|  | 287 | command = lba48 ? WIN_MULTWRITE_EXT : WIN_MULTWRITE; | 
|  | 288 | } else { | 
|  | 289 | hwif->data_phase = TASKFILE_OUT; | 
|  | 290 | command = lba48 ? WIN_WRITE_EXT : WIN_WRITE; | 
|  | 291 | } | 
|  | 292 |  | 
|  | 293 | /* FIXME: ->OUTBSYNC ? */ | 
|  | 294 | hwif->OUTB(command, IDE_COMMAND_REG); | 
|  | 295 |  | 
|  | 296 | return pre_task_out_intr(drive, rq); | 
|  | 297 | } | 
|  | 298 | } | 
|  | 299 |  | 
|  | 300 | /* | 
|  | 301 | * 268435455  == 137439 MB or 28bit limit | 
|  | 302 | * 320173056  == 163929 MB or 48bit addressing | 
|  | 303 | * 1073741822 == 549756 MB or 48bit addressing fake drive | 
|  | 304 | */ | 
|  | 305 |  | 
|  | 306 | static ide_startstop_t ide_do_rw_disk (ide_drive_t *drive, struct request *rq, sector_t block) | 
|  | 307 | { | 
|  | 308 | ide_hwif_t *hwif = HWIF(drive); | 
|  | 309 |  | 
|  | 310 | BUG_ON(drive->blocked); | 
|  | 311 |  | 
|  | 312 | if (!blk_fs_request(rq)) { | 
|  | 313 | blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command"); | 
|  | 314 | ide_end_request(drive, 0, 0); | 
|  | 315 | return ide_stopped; | 
|  | 316 | } | 
|  | 317 |  | 
|  | 318 | pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n", | 
|  | 319 | drive->name, rq_data_dir(rq) == READ ? "read" : "writ", | 
|  | 320 | block, rq->nr_sectors, (unsigned long)rq->buffer); | 
|  | 321 |  | 
|  | 322 | if (hwif->rw_disk) | 
|  | 323 | hwif->rw_disk(drive, rq); | 
|  | 324 |  | 
|  | 325 | return __ide_do_rw_disk(drive, rq, block); | 
|  | 326 | } | 
|  | 327 |  | 
|  | 328 | /* | 
|  | 329 | * Queries for true maximum capacity of the drive. | 
|  | 330 | * Returns maximum LBA address (> 0) of the drive, 0 if failed. | 
|  | 331 | */ | 
|  | 332 | static unsigned long idedisk_read_native_max_address(ide_drive_t *drive) | 
|  | 333 | { | 
|  | 334 | ide_task_t args; | 
|  | 335 | unsigned long addr = 0; | 
|  | 336 |  | 
|  | 337 | /* Create IDE/ATA command request structure */ | 
|  | 338 | memset(&args, 0, sizeof(ide_task_t)); | 
|  | 339 | args.tfRegister[IDE_SELECT_OFFSET]	= 0x40; | 
|  | 340 | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_READ_NATIVE_MAX; | 
|  | 341 | args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
|  | 342 | args.handler				= &task_no_data_intr; | 
|  | 343 | /* submit command request */ | 
|  | 344 | ide_raw_taskfile(drive, &args, NULL); | 
|  | 345 |  | 
|  | 346 | /* if OK, compute maximum address value */ | 
|  | 347 | if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { | 
|  | 348 | addr = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24) | 
|  | 349 | | ((args.tfRegister[  IDE_HCYL_OFFSET]       ) << 16) | 
|  | 350 | | ((args.tfRegister[  IDE_LCYL_OFFSET]       ) <<  8) | 
|  | 351 | | ((args.tfRegister[IDE_SECTOR_OFFSET]       )); | 
|  | 352 | addr++;	/* since the return value is (maxlba - 1), we add 1 */ | 
|  | 353 | } | 
|  | 354 | return addr; | 
|  | 355 | } | 
|  | 356 |  | 
|  | 357 | static unsigned long long idedisk_read_native_max_address_ext(ide_drive_t *drive) | 
|  | 358 | { | 
|  | 359 | ide_task_t args; | 
|  | 360 | unsigned long long addr = 0; | 
|  | 361 |  | 
|  | 362 | /* Create IDE/ATA command request structure */ | 
|  | 363 | memset(&args, 0, sizeof(ide_task_t)); | 
|  | 364 |  | 
|  | 365 | args.tfRegister[IDE_SELECT_OFFSET]	= 0x40; | 
|  | 366 | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_READ_NATIVE_MAX_EXT; | 
|  | 367 | args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
|  | 368 | args.handler				= &task_no_data_intr; | 
|  | 369 | /* submit command request */ | 
|  | 370 | ide_raw_taskfile(drive, &args, NULL); | 
|  | 371 |  | 
|  | 372 | /* if OK, compute maximum address value */ | 
|  | 373 | if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { | 
|  | 374 | u32 high = (args.hobRegister[IDE_HCYL_OFFSET] << 16) | | 
|  | 375 | (args.hobRegister[IDE_LCYL_OFFSET] <<  8) | | 
|  | 376 | args.hobRegister[IDE_SECTOR_OFFSET]; | 
|  | 377 | u32 low  = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) | | 
|  | 378 | ((args.tfRegister[IDE_LCYL_OFFSET])<<8) | | 
|  | 379 | (args.tfRegister[IDE_SECTOR_OFFSET]); | 
|  | 380 | addr = ((__u64)high << 24) | low; | 
|  | 381 | addr++;	/* since the return value is (maxlba - 1), we add 1 */ | 
|  | 382 | } | 
|  | 383 | return addr; | 
|  | 384 | } | 
|  | 385 |  | 
|  | 386 | /* | 
|  | 387 | * Sets maximum virtual LBA address of the drive. | 
|  | 388 | * Returns new maximum virtual LBA address (> 0) or 0 on failure. | 
|  | 389 | */ | 
|  | 390 | static unsigned long idedisk_set_max_address(ide_drive_t *drive, unsigned long addr_req) | 
|  | 391 | { | 
|  | 392 | ide_task_t args; | 
|  | 393 | unsigned long addr_set = 0; | 
|  | 394 |  | 
|  | 395 | addr_req--; | 
|  | 396 | /* Create IDE/ATA command request structure */ | 
|  | 397 | memset(&args, 0, sizeof(ide_task_t)); | 
|  | 398 | args.tfRegister[IDE_SECTOR_OFFSET]	= ((addr_req >>  0) & 0xff); | 
|  | 399 | args.tfRegister[IDE_LCYL_OFFSET]	= ((addr_req >>  8) & 0xff); | 
|  | 400 | args.tfRegister[IDE_HCYL_OFFSET]	= ((addr_req >> 16) & 0xff); | 
|  | 401 | args.tfRegister[IDE_SELECT_OFFSET]	= ((addr_req >> 24) & 0x0f) | 0x40; | 
|  | 402 | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SET_MAX; | 
|  | 403 | args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
|  | 404 | args.handler				= &task_no_data_intr; | 
|  | 405 | /* submit command request */ | 
|  | 406 | ide_raw_taskfile(drive, &args, NULL); | 
|  | 407 | /* if OK, read new maximum address value */ | 
|  | 408 | if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { | 
|  | 409 | addr_set = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24) | 
|  | 410 | | ((args.tfRegister[  IDE_HCYL_OFFSET]       ) << 16) | 
|  | 411 | | ((args.tfRegister[  IDE_LCYL_OFFSET]       ) <<  8) | 
|  | 412 | | ((args.tfRegister[IDE_SECTOR_OFFSET]       )); | 
|  | 413 | addr_set++; | 
|  | 414 | } | 
|  | 415 | return addr_set; | 
|  | 416 | } | 
|  | 417 |  | 
|  | 418 | static unsigned long long idedisk_set_max_address_ext(ide_drive_t *drive, unsigned long long addr_req) | 
|  | 419 | { | 
|  | 420 | ide_task_t args; | 
|  | 421 | unsigned long long addr_set = 0; | 
|  | 422 |  | 
|  | 423 | addr_req--; | 
|  | 424 | /* Create IDE/ATA command request structure */ | 
|  | 425 | memset(&args, 0, sizeof(ide_task_t)); | 
|  | 426 | args.tfRegister[IDE_SECTOR_OFFSET]	= ((addr_req >>  0) & 0xff); | 
|  | 427 | args.tfRegister[IDE_LCYL_OFFSET]	= ((addr_req >>= 8) & 0xff); | 
|  | 428 | args.tfRegister[IDE_HCYL_OFFSET]	= ((addr_req >>= 8) & 0xff); | 
|  | 429 | args.tfRegister[IDE_SELECT_OFFSET]      = 0x40; | 
|  | 430 | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SET_MAX_EXT; | 
|  | 431 | args.hobRegister[IDE_SECTOR_OFFSET]	= (addr_req >>= 8) & 0xff; | 
|  | 432 | args.hobRegister[IDE_LCYL_OFFSET]	= (addr_req >>= 8) & 0xff; | 
|  | 433 | args.hobRegister[IDE_HCYL_OFFSET]	= (addr_req >>= 8) & 0xff; | 
|  | 434 | args.hobRegister[IDE_SELECT_OFFSET]	= 0x40; | 
|  | 435 | args.hobRegister[IDE_CONTROL_OFFSET_HOB]= (drive->ctl|0x80); | 
|  | 436 | args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
|  | 437 | args.handler				= &task_no_data_intr; | 
|  | 438 | /* submit command request */ | 
|  | 439 | ide_raw_taskfile(drive, &args, NULL); | 
|  | 440 | /* if OK, compute maximum address value */ | 
|  | 441 | if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { | 
|  | 442 | u32 high = (args.hobRegister[IDE_HCYL_OFFSET] << 16) | | 
|  | 443 | (args.hobRegister[IDE_LCYL_OFFSET] <<  8) | | 
|  | 444 | args.hobRegister[IDE_SECTOR_OFFSET]; | 
|  | 445 | u32 low  = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) | | 
|  | 446 | ((args.tfRegister[IDE_LCYL_OFFSET])<<8) | | 
|  | 447 | (args.tfRegister[IDE_SECTOR_OFFSET]); | 
|  | 448 | addr_set = ((__u64)high << 24) | low; | 
|  | 449 | addr_set++; | 
|  | 450 | } | 
|  | 451 | return addr_set; | 
|  | 452 | } | 
|  | 453 |  | 
|  | 454 | static unsigned long long sectors_to_MB(unsigned long long n) | 
|  | 455 | { | 
|  | 456 | n <<= 9;		/* make it bytes */ | 
|  | 457 | do_div(n, 1000000);	/* make it MB */ | 
|  | 458 | return n; | 
|  | 459 | } | 
|  | 460 |  | 
|  | 461 | /* | 
|  | 462 | * Bits 10 of command_set_1 and cfs_enable_1 must be equal, | 
|  | 463 | * so on non-buggy drives we need test only one. | 
|  | 464 | * However, we should also check whether these fields are valid. | 
|  | 465 | */ | 
|  | 466 | static inline int idedisk_supports_hpa(const struct hd_driveid *id) | 
|  | 467 | { | 
|  | 468 | return (id->command_set_1 & 0x0400) && (id->cfs_enable_1 & 0x0400); | 
|  | 469 | } | 
|  | 470 |  | 
|  | 471 | /* | 
|  | 472 | * The same here. | 
|  | 473 | */ | 
|  | 474 | static inline int idedisk_supports_lba48(const struct hd_driveid *id) | 
|  | 475 | { | 
|  | 476 | return (id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400) | 
|  | 477 | && id->lba_capacity_2; | 
|  | 478 | } | 
|  | 479 |  | 
|  | 480 | static inline void idedisk_check_hpa(ide_drive_t *drive) | 
|  | 481 | { | 
|  | 482 | unsigned long long capacity, set_max; | 
|  | 483 | int lba48 = idedisk_supports_lba48(drive->id); | 
|  | 484 |  | 
|  | 485 | capacity = drive->capacity64; | 
|  | 486 | if (lba48) | 
|  | 487 | set_max = idedisk_read_native_max_address_ext(drive); | 
|  | 488 | else | 
|  | 489 | set_max = idedisk_read_native_max_address(drive); | 
|  | 490 |  | 
|  | 491 | if (set_max <= capacity) | 
|  | 492 | return; | 
|  | 493 |  | 
|  | 494 | printk(KERN_INFO "%s: Host Protected Area detected.\n" | 
|  | 495 | "\tcurrent capacity is %llu sectors (%llu MB)\n" | 
|  | 496 | "\tnative  capacity is %llu sectors (%llu MB)\n", | 
|  | 497 | drive->name, | 
|  | 498 | capacity, sectors_to_MB(capacity), | 
|  | 499 | set_max, sectors_to_MB(set_max)); | 
|  | 500 |  | 
|  | 501 | if (lba48) | 
|  | 502 | set_max = idedisk_set_max_address_ext(drive, set_max); | 
|  | 503 | else | 
|  | 504 | set_max = idedisk_set_max_address(drive, set_max); | 
|  | 505 | if (set_max) { | 
|  | 506 | drive->capacity64 = set_max; | 
|  | 507 | printk(KERN_INFO "%s: Host Protected Area disabled.\n", | 
|  | 508 | drive->name); | 
|  | 509 | } | 
|  | 510 | } | 
|  | 511 |  | 
|  | 512 | /* | 
|  | 513 | * Compute drive->capacity, the full capacity of the drive | 
|  | 514 | * Called with drive->id != NULL. | 
|  | 515 | * | 
|  | 516 | * To compute capacity, this uses either of | 
|  | 517 | * | 
|  | 518 | *    1. CHS value set by user       (whatever user sets will be trusted) | 
|  | 519 | *    2. LBA value from target drive (require new ATA feature) | 
|  | 520 | *    3. LBA value from system BIOS  (new one is OK, old one may break) | 
|  | 521 | *    4. CHS value from system BIOS  (traditional style) | 
|  | 522 | * | 
|  | 523 | * in above order (i.e., if value of higher priority is available, | 
|  | 524 | * reset will be ignored). | 
|  | 525 | */ | 
|  | 526 | static void init_idedisk_capacity (ide_drive_t  *drive) | 
|  | 527 | { | 
|  | 528 | struct hd_driveid *id = drive->id; | 
|  | 529 | /* | 
|  | 530 | * If this drive supports the Host Protected Area feature set, | 
|  | 531 | * then we may need to change our opinion about the drive's capacity. | 
|  | 532 | */ | 
|  | 533 | int hpa = idedisk_supports_hpa(id); | 
|  | 534 |  | 
|  | 535 | if (idedisk_supports_lba48(id)) { | 
|  | 536 | /* drive speaks 48-bit LBA */ | 
|  | 537 | drive->select.b.lba = 1; | 
|  | 538 | drive->capacity64 = id->lba_capacity_2; | 
|  | 539 | if (hpa) | 
|  | 540 | idedisk_check_hpa(drive); | 
|  | 541 | } else if ((id->capability & 2) && lba_capacity_is_ok(id)) { | 
|  | 542 | /* drive speaks 28-bit LBA */ | 
|  | 543 | drive->select.b.lba = 1; | 
|  | 544 | drive->capacity64 = id->lba_capacity; | 
|  | 545 | if (hpa) | 
|  | 546 | idedisk_check_hpa(drive); | 
|  | 547 | } else { | 
|  | 548 | /* drive speaks boring old 28-bit CHS */ | 
|  | 549 | drive->capacity64 = drive->cyl * drive->head * drive->sect; | 
|  | 550 | } | 
|  | 551 | } | 
|  | 552 |  | 
|  | 553 | static sector_t idedisk_capacity (ide_drive_t *drive) | 
|  | 554 | { | 
|  | 555 | return drive->capacity64 - drive->sect0; | 
|  | 556 | } | 
|  | 557 |  | 
|  | 558 | #ifdef CONFIG_PROC_FS | 
|  | 559 |  | 
|  | 560 | static int smart_enable(ide_drive_t *drive) | 
|  | 561 | { | 
|  | 562 | ide_task_t args; | 
|  | 563 |  | 
|  | 564 | memset(&args, 0, sizeof(ide_task_t)); | 
|  | 565 | args.tfRegister[IDE_FEATURE_OFFSET]	= SMART_ENABLE; | 
|  | 566 | args.tfRegister[IDE_LCYL_OFFSET]	= SMART_LCYL_PASS; | 
|  | 567 | args.tfRegister[IDE_HCYL_OFFSET]	= SMART_HCYL_PASS; | 
|  | 568 | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SMART; | 
|  | 569 | args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
|  | 570 | args.handler				= &task_no_data_intr; | 
|  | 571 | return ide_raw_taskfile(drive, &args, NULL); | 
|  | 572 | } | 
|  | 573 |  | 
|  | 574 | static int get_smart_values(ide_drive_t *drive, u8 *buf) | 
|  | 575 | { | 
|  | 576 | ide_task_t args; | 
|  | 577 |  | 
|  | 578 | memset(&args, 0, sizeof(ide_task_t)); | 
|  | 579 | args.tfRegister[IDE_FEATURE_OFFSET]	= SMART_READ_VALUES; | 
|  | 580 | args.tfRegister[IDE_NSECTOR_OFFSET]	= 0x01; | 
|  | 581 | args.tfRegister[IDE_LCYL_OFFSET]	= SMART_LCYL_PASS; | 
|  | 582 | args.tfRegister[IDE_HCYL_OFFSET]	= SMART_HCYL_PASS; | 
|  | 583 | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SMART; | 
|  | 584 | args.command_type			= IDE_DRIVE_TASK_IN; | 
|  | 585 | args.data_phase				= TASKFILE_IN; | 
|  | 586 | args.handler				= &task_in_intr; | 
|  | 587 | (void) smart_enable(drive); | 
|  | 588 | return ide_raw_taskfile(drive, &args, buf); | 
|  | 589 | } | 
|  | 590 |  | 
|  | 591 | static int get_smart_thresholds(ide_drive_t *drive, u8 *buf) | 
|  | 592 | { | 
|  | 593 | ide_task_t args; | 
|  | 594 | memset(&args, 0, sizeof(ide_task_t)); | 
|  | 595 | args.tfRegister[IDE_FEATURE_OFFSET]	= SMART_READ_THRESHOLDS; | 
|  | 596 | args.tfRegister[IDE_NSECTOR_OFFSET]	= 0x01; | 
|  | 597 | args.tfRegister[IDE_LCYL_OFFSET]	= SMART_LCYL_PASS; | 
|  | 598 | args.tfRegister[IDE_HCYL_OFFSET]	= SMART_HCYL_PASS; | 
|  | 599 | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SMART; | 
|  | 600 | args.command_type			= IDE_DRIVE_TASK_IN; | 
|  | 601 | args.data_phase				= TASKFILE_IN; | 
|  | 602 | args.handler				= &task_in_intr; | 
|  | 603 | (void) smart_enable(drive); | 
|  | 604 | return ide_raw_taskfile(drive, &args, buf); | 
|  | 605 | } | 
|  | 606 |  | 
|  | 607 | static int proc_idedisk_read_cache | 
|  | 608 | (char *page, char **start, off_t off, int count, int *eof, void *data) | 
|  | 609 | { | 
|  | 610 | ide_drive_t	*drive = (ide_drive_t *) data; | 
|  | 611 | char		*out = page; | 
|  | 612 | int		len; | 
|  | 613 |  | 
|  | 614 | if (drive->id_read) | 
|  | 615 | len = sprintf(out,"%i\n", drive->id->buf_size / 2); | 
|  | 616 | else | 
|  | 617 | len = sprintf(out,"(none)\n"); | 
|  | 618 | PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | 
|  | 619 | } | 
|  | 620 |  | 
|  | 621 | static int proc_idedisk_read_capacity | 
|  | 622 | (char *page, char **start, off_t off, int count, int *eof, void *data) | 
|  | 623 | { | 
|  | 624 | ide_drive_t*drive = (ide_drive_t *)data; | 
|  | 625 | int len; | 
|  | 626 |  | 
|  | 627 | len = sprintf(page,"%llu\n", (long long)idedisk_capacity(drive)); | 
|  | 628 | PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | 
|  | 629 | } | 
|  | 630 |  | 
|  | 631 | static int proc_idedisk_read_smart_thresholds | 
|  | 632 | (char *page, char **start, off_t off, int count, int *eof, void *data) | 
|  | 633 | { | 
|  | 634 | ide_drive_t	*drive = (ide_drive_t *)data; | 
|  | 635 | int		len = 0, i = 0; | 
|  | 636 |  | 
|  | 637 | if (!get_smart_thresholds(drive, page)) { | 
|  | 638 | unsigned short *val = (unsigned short *) page; | 
|  | 639 | char *out = ((char *)val) + (SECTOR_WORDS * 4); | 
|  | 640 | page = out; | 
|  | 641 | do { | 
|  | 642 | out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n'); | 
|  | 643 | val += 1; | 
|  | 644 | } while (i < (SECTOR_WORDS * 2)); | 
|  | 645 | len = out - page; | 
|  | 646 | } | 
|  | 647 | PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | 
|  | 648 | } | 
|  | 649 |  | 
|  | 650 | static int proc_idedisk_read_smart_values | 
|  | 651 | (char *page, char **start, off_t off, int count, int *eof, void *data) | 
|  | 652 | { | 
|  | 653 | ide_drive_t	*drive = (ide_drive_t *)data; | 
|  | 654 | int		len = 0, i = 0; | 
|  | 655 |  | 
|  | 656 | if (!get_smart_values(drive, page)) { | 
|  | 657 | unsigned short *val = (unsigned short *) page; | 
|  | 658 | char *out = ((char *)val) + (SECTOR_WORDS * 4); | 
|  | 659 | page = out; | 
|  | 660 | do { | 
|  | 661 | out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n'); | 
|  | 662 | val += 1; | 
|  | 663 | } while (i < (SECTOR_WORDS * 2)); | 
|  | 664 | len = out - page; | 
|  | 665 | } | 
|  | 666 | PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | 
|  | 667 | } | 
|  | 668 |  | 
|  | 669 | static ide_proc_entry_t idedisk_proc[] = { | 
|  | 670 | { "cache",		S_IFREG|S_IRUGO,	proc_idedisk_read_cache,		NULL }, | 
|  | 671 | { "capacity",		S_IFREG|S_IRUGO,	proc_idedisk_read_capacity,		NULL }, | 
|  | 672 | { "geometry",		S_IFREG|S_IRUGO,	proc_ide_read_geometry,			NULL }, | 
|  | 673 | { "smart_values",	S_IFREG|S_IRUSR,	proc_idedisk_read_smart_values,		NULL }, | 
|  | 674 | { "smart_thresholds",	S_IFREG|S_IRUSR,	proc_idedisk_read_smart_thresholds,	NULL }, | 
|  | 675 | { NULL, 0, NULL, NULL } | 
|  | 676 | }; | 
|  | 677 |  | 
|  | 678 | #else | 
|  | 679 |  | 
|  | 680 | #define	idedisk_proc	NULL | 
|  | 681 |  | 
|  | 682 | #endif	/* CONFIG_PROC_FS */ | 
|  | 683 |  | 
|  | 684 | static void idedisk_end_flush(request_queue_t *q, struct request *flush_rq) | 
|  | 685 | { | 
|  | 686 | ide_drive_t *drive = q->queuedata; | 
|  | 687 | struct request *rq = flush_rq->end_io_data; | 
|  | 688 | int good_sectors = rq->hard_nr_sectors; | 
|  | 689 | int bad_sectors; | 
|  | 690 | sector_t sector; | 
|  | 691 |  | 
|  | 692 | if (flush_rq->errors & ABRT_ERR) { | 
|  | 693 | printk(KERN_ERR "%s: barrier support doesn't work\n", drive->name); | 
|  | 694 | blk_queue_ordered(drive->queue, QUEUE_ORDERED_NONE); | 
|  | 695 | blk_queue_issue_flush_fn(drive->queue, NULL); | 
|  | 696 | good_sectors = 0; | 
|  | 697 | } else if (flush_rq->errors) { | 
|  | 698 | good_sectors = 0; | 
|  | 699 | if (blk_barrier_preflush(rq)) { | 
|  | 700 | sector = ide_get_error_location(drive,flush_rq->buffer); | 
|  | 701 | if ((sector >= rq->hard_sector) && | 
|  | 702 | (sector < rq->hard_sector + rq->hard_nr_sectors)) | 
|  | 703 | good_sectors = sector - rq->hard_sector; | 
|  | 704 | } | 
|  | 705 | } | 
|  | 706 |  | 
|  | 707 | if (flush_rq->errors) | 
|  | 708 | printk(KERN_ERR "%s: failed barrier write: " | 
|  | 709 | "sector=%Lx(good=%d/bad=%d)\n", | 
|  | 710 | drive->name, (unsigned long long)rq->sector, | 
|  | 711 | good_sectors, | 
|  | 712 | (int) (rq->hard_nr_sectors-good_sectors)); | 
|  | 713 |  | 
|  | 714 | bad_sectors = rq->hard_nr_sectors - good_sectors; | 
|  | 715 |  | 
|  | 716 | if (good_sectors) | 
|  | 717 | __ide_end_request(drive, rq, 1, good_sectors); | 
|  | 718 | if (bad_sectors) | 
|  | 719 | __ide_end_request(drive, rq, 0, bad_sectors); | 
|  | 720 | } | 
|  | 721 |  | 
|  | 722 | static int idedisk_prepare_flush(request_queue_t *q, struct request *rq) | 
|  | 723 | { | 
|  | 724 | ide_drive_t *drive = q->queuedata; | 
|  | 725 |  | 
|  | 726 | if (!drive->wcache) | 
|  | 727 | return 0; | 
|  | 728 |  | 
|  | 729 | memset(rq->cmd, 0, sizeof(rq->cmd)); | 
|  | 730 |  | 
|  | 731 | if (ide_id_has_flush_cache_ext(drive->id) && | 
|  | 732 | (drive->capacity64 >= (1UL << 28))) | 
|  | 733 | rq->cmd[0] = WIN_FLUSH_CACHE_EXT; | 
|  | 734 | else | 
|  | 735 | rq->cmd[0] = WIN_FLUSH_CACHE; | 
|  | 736 |  | 
|  | 737 |  | 
|  | 738 | rq->flags |= REQ_DRIVE_TASK | REQ_SOFTBARRIER; | 
|  | 739 | rq->buffer = rq->cmd; | 
|  | 740 | return 1; | 
|  | 741 | } | 
|  | 742 |  | 
|  | 743 | static int idedisk_issue_flush(request_queue_t *q, struct gendisk *disk, | 
|  | 744 | sector_t *error_sector) | 
|  | 745 | { | 
|  | 746 | ide_drive_t *drive = q->queuedata; | 
|  | 747 | struct request *rq; | 
|  | 748 | int ret; | 
|  | 749 |  | 
|  | 750 | if (!drive->wcache) | 
|  | 751 | return 0; | 
|  | 752 |  | 
|  | 753 | rq = blk_get_request(q, WRITE, __GFP_WAIT); | 
|  | 754 |  | 
|  | 755 | idedisk_prepare_flush(q, rq); | 
|  | 756 |  | 
| James Bottomley | 994ca9a | 2005-06-20 14:11:09 +0200 | [diff] [blame] | 757 | ret = blk_execute_rq(q, disk, rq, 0); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 758 |  | 
|  | 759 | /* | 
|  | 760 | * if we failed and caller wants error offset, get it | 
|  | 761 | */ | 
|  | 762 | if (ret && error_sector) | 
|  | 763 | *error_sector = ide_get_error_location(drive, rq->cmd); | 
|  | 764 |  | 
|  | 765 | blk_put_request(rq); | 
|  | 766 | return ret; | 
|  | 767 | } | 
|  | 768 |  | 
|  | 769 | /* | 
|  | 770 | * This is tightly woven into the driver->do_special can not touch. | 
|  | 771 | * DON'T do it again until a total personality rewrite is committed. | 
|  | 772 | */ | 
|  | 773 | static int set_multcount(ide_drive_t *drive, int arg) | 
|  | 774 | { | 
|  | 775 | struct request rq; | 
|  | 776 |  | 
|  | 777 | if (drive->special.b.set_multmode) | 
|  | 778 | return -EBUSY; | 
|  | 779 | ide_init_drive_cmd (&rq); | 
|  | 780 | rq.flags = REQ_DRIVE_CMD; | 
|  | 781 | drive->mult_req = arg; | 
|  | 782 | drive->special.b.set_multmode = 1; | 
|  | 783 | (void) ide_do_drive_cmd (drive, &rq, ide_wait); | 
|  | 784 | return (drive->mult_count == arg) ? 0 : -EIO; | 
|  | 785 | } | 
|  | 786 |  | 
|  | 787 | static int set_nowerr(ide_drive_t *drive, int arg) | 
|  | 788 | { | 
|  | 789 | if (ide_spin_wait_hwgroup(drive)) | 
|  | 790 | return -EBUSY; | 
|  | 791 | drive->nowerr = arg; | 
|  | 792 | drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT; | 
|  | 793 | spin_unlock_irq(&ide_lock); | 
|  | 794 | return 0; | 
|  | 795 | } | 
|  | 796 |  | 
|  | 797 | static int write_cache(ide_drive_t *drive, int arg) | 
|  | 798 | { | 
|  | 799 | ide_task_t args; | 
|  | 800 | int err; | 
|  | 801 |  | 
|  | 802 | if (!ide_id_has_flush_cache(drive->id)) | 
|  | 803 | return 1; | 
|  | 804 |  | 
|  | 805 | memset(&args, 0, sizeof(ide_task_t)); | 
|  | 806 | args.tfRegister[IDE_FEATURE_OFFSET]	= (arg) ? | 
|  | 807 | SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE; | 
|  | 808 | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SETFEATURES; | 
|  | 809 | args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
|  | 810 | args.handler				= &task_no_data_intr; | 
|  | 811 |  | 
|  | 812 | err = ide_raw_taskfile(drive, &args, NULL); | 
|  | 813 | if (err) | 
|  | 814 | return err; | 
|  | 815 |  | 
|  | 816 | drive->wcache = arg; | 
|  | 817 | return 0; | 
|  | 818 | } | 
|  | 819 |  | 
|  | 820 | static int do_idedisk_flushcache (ide_drive_t *drive) | 
|  | 821 | { | 
|  | 822 | ide_task_t args; | 
|  | 823 |  | 
|  | 824 | memset(&args, 0, sizeof(ide_task_t)); | 
|  | 825 | if (ide_id_has_flush_cache_ext(drive->id)) | 
|  | 826 | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_FLUSH_CACHE_EXT; | 
|  | 827 | else | 
|  | 828 | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_FLUSH_CACHE; | 
|  | 829 | args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
|  | 830 | args.handler				= &task_no_data_intr; | 
|  | 831 | return ide_raw_taskfile(drive, &args, NULL); | 
|  | 832 | } | 
|  | 833 |  | 
|  | 834 | static int set_acoustic (ide_drive_t *drive, int arg) | 
|  | 835 | { | 
|  | 836 | ide_task_t args; | 
|  | 837 |  | 
|  | 838 | memset(&args, 0, sizeof(ide_task_t)); | 
|  | 839 | args.tfRegister[IDE_FEATURE_OFFSET]	= (arg) ? SETFEATURES_EN_AAM : | 
|  | 840 | SETFEATURES_DIS_AAM; | 
|  | 841 | args.tfRegister[IDE_NSECTOR_OFFSET]	= arg; | 
|  | 842 | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SETFEATURES; | 
|  | 843 | args.command_type = IDE_DRIVE_TASK_NO_DATA; | 
|  | 844 | args.handler	  = &task_no_data_intr; | 
|  | 845 | ide_raw_taskfile(drive, &args, NULL); | 
|  | 846 | drive->acoustic = arg; | 
|  | 847 | return 0; | 
|  | 848 | } | 
|  | 849 |  | 
|  | 850 | /* | 
|  | 851 | * drive->addressing: | 
|  | 852 | *	0: 28-bit | 
|  | 853 | *	1: 48-bit | 
|  | 854 | *	2: 48-bit capable doing 28-bit | 
|  | 855 | */ | 
|  | 856 | static int set_lba_addressing(ide_drive_t *drive, int arg) | 
|  | 857 | { | 
|  | 858 | drive->addressing =  0; | 
|  | 859 |  | 
|  | 860 | if (HWIF(drive)->no_lba48) | 
|  | 861 | return 0; | 
|  | 862 |  | 
|  | 863 | if (!idedisk_supports_lba48(drive->id)) | 
|  | 864 | return -EIO; | 
|  | 865 | drive->addressing = arg; | 
|  | 866 | return 0; | 
|  | 867 | } | 
|  | 868 |  | 
|  | 869 | static void idedisk_add_settings(ide_drive_t *drive) | 
|  | 870 | { | 
|  | 871 | struct hd_driveid *id = drive->id; | 
|  | 872 |  | 
|  | 873 | ide_add_setting(drive,	"bios_cyl",		SETTING_RW,					-1,			-1,			TYPE_INT,	0,	65535,				1,	1,	&drive->bios_cyl,		NULL); | 
|  | 874 | ide_add_setting(drive,	"bios_head",		SETTING_RW,					-1,			-1,			TYPE_BYTE,	0,	255,				1,	1,	&drive->bios_head,		NULL); | 
|  | 875 | ide_add_setting(drive,	"bios_sect",		SETTING_RW,					-1,			-1,			TYPE_BYTE,	0,	63,				1,	1,	&drive->bios_sect,		NULL); | 
|  | 876 | ide_add_setting(drive,	"address",		SETTING_RW,					HDIO_GET_ADDRESS,	HDIO_SET_ADDRESS,	TYPE_INTA,	0,	2,				1,	1,	&drive->addressing,	set_lba_addressing); | 
|  | 877 | ide_add_setting(drive,	"bswap",		SETTING_READ,					-1,			-1,			TYPE_BYTE,	0,	1,				1,	1,	&drive->bswap,			NULL); | 
|  | 878 | ide_add_setting(drive,	"multcount",		id ? SETTING_RW : SETTING_READ,			HDIO_GET_MULTCOUNT,	HDIO_SET_MULTCOUNT,	TYPE_BYTE,	0,	id ? id->max_multsect : 0,	1,	1,	&drive->mult_count,		set_multcount); | 
|  | 879 | ide_add_setting(drive,	"nowerr",		SETTING_RW,					HDIO_GET_NOWERR,	HDIO_SET_NOWERR,	TYPE_BYTE,	0,	1,				1,	1,	&drive->nowerr,			set_nowerr); | 
|  | 880 | ide_add_setting(drive,	"lun",			SETTING_RW,					-1,			-1,			TYPE_INT,	0,	7,				1,	1,	&drive->lun,			NULL); | 
|  | 881 | ide_add_setting(drive,	"wcache",		SETTING_RW,					HDIO_GET_WCACHE,	HDIO_SET_WCACHE,	TYPE_BYTE,	0,	1,				1,	1,	&drive->wcache,			write_cache); | 
|  | 882 | ide_add_setting(drive,	"acoustic",		SETTING_RW,					HDIO_GET_ACOUSTIC,	HDIO_SET_ACOUSTIC,	TYPE_BYTE,	0,	254,				1,	1,	&drive->acoustic,		set_acoustic); | 
|  | 883 | ide_add_setting(drive,	"failures",		SETTING_RW,					-1,			-1,			TYPE_INT,	0,	65535,				1,	1,	&drive->failures,		NULL); | 
|  | 884 | ide_add_setting(drive,	"max_failures",		SETTING_RW,					-1,			-1,			TYPE_INT,	0,	65535,				1,	1,	&drive->max_failures,		NULL); | 
|  | 885 | } | 
|  | 886 |  | 
|  | 887 | static void idedisk_setup (ide_drive_t *drive) | 
|  | 888 | { | 
|  | 889 | struct hd_driveid *id = drive->id; | 
|  | 890 | unsigned long long capacity; | 
|  | 891 | int barrier; | 
|  | 892 |  | 
|  | 893 | idedisk_add_settings(drive); | 
|  | 894 |  | 
|  | 895 | if (drive->id_read == 0) | 
|  | 896 | return; | 
|  | 897 |  | 
|  | 898 | /* | 
|  | 899 | * CompactFlash cards and their brethern look just like hard drives | 
|  | 900 | * to us, but they are removable and don't have a doorlock mechanism. | 
|  | 901 | */ | 
|  | 902 | if (drive->removable && !(drive->is_flash)) { | 
|  | 903 | /* | 
|  | 904 | * Removable disks (eg. SYQUEST); ignore 'WD' drives | 
|  | 905 | */ | 
|  | 906 | if (id->model[0] != 'W' || id->model[1] != 'D') { | 
|  | 907 | drive->doorlocking = 1; | 
|  | 908 | } | 
|  | 909 | } | 
|  | 910 |  | 
|  | 911 | (void)set_lba_addressing(drive, 1); | 
|  | 912 |  | 
|  | 913 | if (drive->addressing == 1) { | 
|  | 914 | ide_hwif_t *hwif = HWIF(drive); | 
|  | 915 | int max_s = 2048; | 
|  | 916 |  | 
|  | 917 | if (max_s > hwif->rqsize) | 
|  | 918 | max_s = hwif->rqsize; | 
|  | 919 |  | 
|  | 920 | blk_queue_max_sectors(drive->queue, max_s); | 
|  | 921 | } | 
|  | 922 |  | 
|  | 923 | printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, drive->queue->max_sectors / 2); | 
|  | 924 |  | 
|  | 925 | /* calculate drive capacity, and select LBA if possible */ | 
|  | 926 | init_idedisk_capacity (drive); | 
|  | 927 |  | 
|  | 928 | /* limit drive capacity to 137GB if LBA48 cannot be used */ | 
|  | 929 | if (drive->addressing == 0 && drive->capacity64 > 1ULL << 28) { | 
|  | 930 | printk(KERN_WARNING "%s: cannot use LBA48 - full capacity " | 
|  | 931 | "%llu sectors (%llu MB)\n", | 
|  | 932 | drive->name, (unsigned long long)drive->capacity64, | 
|  | 933 | sectors_to_MB(drive->capacity64)); | 
|  | 934 | drive->capacity64 = 1ULL << 28; | 
|  | 935 | } | 
|  | 936 |  | 
|  | 937 | if (drive->hwif->no_lba48_dma && drive->addressing) { | 
|  | 938 | if (drive->capacity64 > 1ULL << 28) { | 
|  | 939 | printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode will" | 
|  | 940 | " be used for accessing sectors > %u\n", | 
|  | 941 | drive->name, 1 << 28); | 
|  | 942 | } else | 
|  | 943 | drive->addressing = 0; | 
|  | 944 | } | 
|  | 945 |  | 
|  | 946 | /* | 
|  | 947 | * if possible, give fdisk access to more of the drive, | 
|  | 948 | * by correcting bios_cyls: | 
|  | 949 | */ | 
|  | 950 | capacity = idedisk_capacity (drive); | 
|  | 951 | if (!drive->forced_geom) { | 
|  | 952 |  | 
|  | 953 | if (idedisk_supports_lba48(drive->id)) { | 
|  | 954 | /* compatibility */ | 
|  | 955 | drive->bios_sect = 63; | 
|  | 956 | drive->bios_head = 255; | 
|  | 957 | } | 
|  | 958 |  | 
|  | 959 | if (drive->bios_sect && drive->bios_head) { | 
|  | 960 | unsigned int cap0 = capacity; /* truncate to 32 bits */ | 
|  | 961 | unsigned int cylsz, cyl; | 
|  | 962 |  | 
|  | 963 | if (cap0 != capacity) | 
|  | 964 | drive->bios_cyl = 65535; | 
|  | 965 | else { | 
|  | 966 | cylsz = drive->bios_sect * drive->bios_head; | 
|  | 967 | cyl = cap0 / cylsz; | 
|  | 968 | if (cyl > 65535) | 
|  | 969 | cyl = 65535; | 
|  | 970 | if (cyl > drive->bios_cyl) | 
|  | 971 | drive->bios_cyl = cyl; | 
|  | 972 | } | 
|  | 973 | } | 
|  | 974 | } | 
|  | 975 | printk(KERN_INFO "%s: %llu sectors (%llu MB)", | 
|  | 976 | drive->name, capacity, sectors_to_MB(capacity)); | 
|  | 977 |  | 
|  | 978 | /* Only print cache size when it was specified */ | 
|  | 979 | if (id->buf_size) | 
|  | 980 | printk (" w/%dKiB Cache", id->buf_size/2); | 
|  | 981 |  | 
|  | 982 | printk(", CHS=%d/%d/%d", | 
|  | 983 | drive->bios_cyl, drive->bios_head, drive->bios_sect); | 
|  | 984 | if (drive->using_dma) | 
|  | 985 | ide_dma_verbose(drive); | 
|  | 986 | printk("\n"); | 
|  | 987 |  | 
|  | 988 | drive->no_io_32bit = id->dword_io ? 1 : 0; | 
|  | 989 |  | 
|  | 990 | /* write cache enabled? */ | 
|  | 991 | if ((id->csfo & 1) || (id->cfs_enable_1 & (1 << 5))) | 
|  | 992 | drive->wcache = 1; | 
|  | 993 |  | 
|  | 994 | write_cache(drive, 1); | 
|  | 995 |  | 
|  | 996 | /* | 
|  | 997 | * We must avoid issuing commands a drive does not understand | 
|  | 998 | * or we may crash it. We check flush cache is supported. We also | 
|  | 999 | * check we have the LBA48 flush cache if the drive capacity is | 
|  | 1000 | * too large. By this time we have trimmed the drive capacity if | 
|  | 1001 | * LBA48 is not available so we don't need to recheck that. | 
|  | 1002 | */ | 
|  | 1003 | barrier = 0; | 
|  | 1004 | if (ide_id_has_flush_cache(id)) | 
|  | 1005 | barrier = 1; | 
|  | 1006 | if (drive->addressing == 1) { | 
|  | 1007 | /* Can't issue the correct flush ? */ | 
|  | 1008 | if (capacity > (1ULL << 28) && !ide_id_has_flush_cache_ext(id)) | 
|  | 1009 | barrier = 0; | 
|  | 1010 | } | 
|  | 1011 |  | 
|  | 1012 | printk(KERN_INFO "%s: cache flushes %ssupported\n", | 
|  | 1013 | drive->name, barrier ? "" : "not "); | 
|  | 1014 | if (barrier) { | 
|  | 1015 | blk_queue_ordered(drive->queue, QUEUE_ORDERED_FLUSH); | 
|  | 1016 | drive->queue->prepare_flush_fn = idedisk_prepare_flush; | 
|  | 1017 | drive->queue->end_flush_fn = idedisk_end_flush; | 
|  | 1018 | blk_queue_issue_flush_fn(drive->queue, idedisk_issue_flush); | 
|  | 1019 | } | 
|  | 1020 | } | 
|  | 1021 |  | 
|  | 1022 | static void ide_cacheflush_p(ide_drive_t *drive) | 
|  | 1023 | { | 
|  | 1024 | if (!drive->wcache || !ide_id_has_flush_cache(drive->id)) | 
|  | 1025 | return; | 
|  | 1026 |  | 
|  | 1027 | if (do_idedisk_flushcache(drive)) | 
|  | 1028 | printk(KERN_INFO "%s: wcache flush failed!\n", drive->name); | 
|  | 1029 | } | 
|  | 1030 |  | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1031 | static int ide_disk_remove(struct device *dev) | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1032 | { | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1033 | ide_drive_t *drive = to_ide_device(dev); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1034 | struct ide_disk_obj *idkp = drive->driver_data; | 
|  | 1035 | struct gendisk *g = idkp->disk; | 
|  | 1036 |  | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1037 | ide_unregister_subdriver(drive, idkp->driver); | 
|  | 1038 |  | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1039 | del_gendisk(g); | 
|  | 1040 |  | 
| Bartlomiej Zolnierkiewicz | d36fef6 | 2005-12-15 02:19:20 +0100 | [diff] [blame] | 1041 | ide_cacheflush_p(drive); | 
|  | 1042 |  | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1043 | ide_disk_put(idkp); | 
|  | 1044 |  | 
|  | 1045 | return 0; | 
|  | 1046 | } | 
|  | 1047 |  | 
|  | 1048 | static void ide_disk_release(struct kref *kref) | 
|  | 1049 | { | 
|  | 1050 | struct ide_disk_obj *idkp = to_ide_disk(kref); | 
|  | 1051 | ide_drive_t *drive = idkp->drive; | 
|  | 1052 | struct gendisk *g = idkp->disk; | 
|  | 1053 |  | 
|  | 1054 | drive->driver_data = NULL; | 
|  | 1055 | drive->devfs_name[0] = '\0'; | 
|  | 1056 | g->private_data = NULL; | 
|  | 1057 | put_disk(g); | 
|  | 1058 | kfree(idkp); | 
|  | 1059 | } | 
|  | 1060 |  | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1061 | static int ide_disk_probe(struct device *dev); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1062 |  | 
|  | 1063 | static void ide_device_shutdown(struct device *dev) | 
|  | 1064 | { | 
|  | 1065 | ide_drive_t *drive = container_of(dev, ide_drive_t, gendev); | 
|  | 1066 |  | 
|  | 1067 | #ifdef	CONFIG_ALPHA | 
|  | 1068 | /* On Alpha, halt(8) doesn't actually turn the machine off, | 
|  | 1069 | it puts you into the sort of firmware monitor. Typically, | 
|  | 1070 | it's used to boot another kernel image, so it's not much | 
|  | 1071 | different from reboot(8). Therefore, we don't need to | 
|  | 1072 | spin down the disk in this case, especially since Alpha | 
|  | 1073 | firmware doesn't handle disks in standby mode properly. | 
|  | 1074 | On the other hand, it's reasonably safe to turn the power | 
|  | 1075 | off when the shutdown process reaches the firmware prompt, | 
|  | 1076 | as the firmware initialization takes rather long time - | 
|  | 1077 | at least 10 seconds, which should be sufficient for | 
|  | 1078 | the disk to expire its write cache. */ | 
|  | 1079 | if (system_state != SYSTEM_POWER_OFF) { | 
|  | 1080 | #else | 
|  | 1081 | if (system_state == SYSTEM_RESTART) { | 
|  | 1082 | #endif | 
|  | 1083 | ide_cacheflush_p(drive); | 
|  | 1084 | return; | 
|  | 1085 | } | 
|  | 1086 |  | 
|  | 1087 | printk("Shutdown: %s\n", drive->name); | 
|  | 1088 | dev->bus->suspend(dev, PMSG_SUSPEND); | 
|  | 1089 | } | 
|  | 1090 |  | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1091 | static ide_driver_t idedisk_driver = { | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1092 | .gen_driver = { | 
| Laurent Riffard | 4ef3b8f | 2005-11-18 22:15:40 +0100 | [diff] [blame] | 1093 | .owner		= THIS_MODULE, | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1094 | .name		= "ide-disk", | 
|  | 1095 | .bus		= &ide_bus_type, | 
|  | 1096 | .probe		= ide_disk_probe, | 
|  | 1097 | .remove		= ide_disk_remove, | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1098 | .shutdown	= ide_device_shutdown, | 
|  | 1099 | }, | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1100 | .version		= IDEDISK_VERSION, | 
|  | 1101 | .media			= ide_disk, | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1102 | .supports_dsc_overlap	= 0, | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1103 | .do_request		= ide_do_rw_disk, | 
|  | 1104 | .end_request		= ide_end_request, | 
|  | 1105 | .error			= __ide_error, | 
|  | 1106 | .abort			= __ide_abort, | 
|  | 1107 | .proc			= idedisk_proc, | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1108 | }; | 
|  | 1109 |  | 
|  | 1110 | static int idedisk_open(struct inode *inode, struct file *filp) | 
|  | 1111 | { | 
|  | 1112 | struct gendisk *disk = inode->i_bdev->bd_disk; | 
|  | 1113 | struct ide_disk_obj *idkp; | 
|  | 1114 | ide_drive_t *drive; | 
|  | 1115 |  | 
|  | 1116 | if (!(idkp = ide_disk_get(disk))) | 
|  | 1117 | return -ENXIO; | 
|  | 1118 |  | 
|  | 1119 | drive = idkp->drive; | 
|  | 1120 |  | 
|  | 1121 | drive->usage++; | 
|  | 1122 | if (drive->removable && drive->usage == 1) { | 
|  | 1123 | ide_task_t args; | 
|  | 1124 | memset(&args, 0, sizeof(ide_task_t)); | 
|  | 1125 | args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORLOCK; | 
|  | 1126 | args.command_type = IDE_DRIVE_TASK_NO_DATA; | 
|  | 1127 | args.handler	  = &task_no_data_intr; | 
|  | 1128 | check_disk_change(inode->i_bdev); | 
|  | 1129 | /* | 
|  | 1130 | * Ignore the return code from door_lock, | 
|  | 1131 | * since the open() has already succeeded, | 
|  | 1132 | * and the door_lock is irrelevant at this point. | 
|  | 1133 | */ | 
|  | 1134 | if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL)) | 
|  | 1135 | drive->doorlocking = 0; | 
|  | 1136 | } | 
|  | 1137 | return 0; | 
|  | 1138 | } | 
|  | 1139 |  | 
|  | 1140 | static int idedisk_release(struct inode *inode, struct file *filp) | 
|  | 1141 | { | 
|  | 1142 | struct gendisk *disk = inode->i_bdev->bd_disk; | 
|  | 1143 | struct ide_disk_obj *idkp = ide_disk_g(disk); | 
|  | 1144 | ide_drive_t *drive = idkp->drive; | 
|  | 1145 |  | 
|  | 1146 | if (drive->usage == 1) | 
|  | 1147 | ide_cacheflush_p(drive); | 
|  | 1148 | if (drive->removable && drive->usage == 1) { | 
|  | 1149 | ide_task_t args; | 
|  | 1150 | memset(&args, 0, sizeof(ide_task_t)); | 
|  | 1151 | args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORUNLOCK; | 
|  | 1152 | args.command_type = IDE_DRIVE_TASK_NO_DATA; | 
|  | 1153 | args.handler	  = &task_no_data_intr; | 
|  | 1154 | if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL)) | 
|  | 1155 | drive->doorlocking = 0; | 
|  | 1156 | } | 
|  | 1157 | drive->usage--; | 
|  | 1158 |  | 
|  | 1159 | ide_disk_put(idkp); | 
|  | 1160 |  | 
|  | 1161 | return 0; | 
|  | 1162 | } | 
|  | 1163 |  | 
|  | 1164 | static int idedisk_ioctl(struct inode *inode, struct file *file, | 
|  | 1165 | unsigned int cmd, unsigned long arg) | 
|  | 1166 | { | 
|  | 1167 | struct block_device *bdev = inode->i_bdev; | 
|  | 1168 | struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk); | 
|  | 1169 | return generic_ide_ioctl(idkp->drive, file, bdev, cmd, arg); | 
|  | 1170 | } | 
|  | 1171 |  | 
|  | 1172 | static int idedisk_media_changed(struct gendisk *disk) | 
|  | 1173 | { | 
|  | 1174 | struct ide_disk_obj *idkp = ide_disk_g(disk); | 
|  | 1175 | ide_drive_t *drive = idkp->drive; | 
|  | 1176 |  | 
|  | 1177 | /* do not scan partitions twice if this is a removable device */ | 
|  | 1178 | if (drive->attach) { | 
|  | 1179 | drive->attach = 0; | 
|  | 1180 | return 0; | 
|  | 1181 | } | 
|  | 1182 | /* if removable, always assume it was changed */ | 
|  | 1183 | return drive->removable; | 
|  | 1184 | } | 
|  | 1185 |  | 
|  | 1186 | static int idedisk_revalidate_disk(struct gendisk *disk) | 
|  | 1187 | { | 
|  | 1188 | struct ide_disk_obj *idkp = ide_disk_g(disk); | 
|  | 1189 | set_capacity(disk, idedisk_capacity(idkp->drive)); | 
|  | 1190 | return 0; | 
|  | 1191 | } | 
|  | 1192 |  | 
|  | 1193 | static struct block_device_operations idedisk_ops = { | 
|  | 1194 | .owner		= THIS_MODULE, | 
|  | 1195 | .open		= idedisk_open, | 
|  | 1196 | .release	= idedisk_release, | 
|  | 1197 | .ioctl		= idedisk_ioctl, | 
|  | 1198 | .media_changed	= idedisk_media_changed, | 
|  | 1199 | .revalidate_disk= idedisk_revalidate_disk | 
|  | 1200 | }; | 
|  | 1201 |  | 
|  | 1202 | MODULE_DESCRIPTION("ATA DISK Driver"); | 
|  | 1203 |  | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1204 | static int ide_disk_probe(struct device *dev) | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1205 | { | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1206 | ide_drive_t *drive = to_ide_device(dev); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1207 | struct ide_disk_obj *idkp; | 
|  | 1208 | struct gendisk *g; | 
|  | 1209 |  | 
|  | 1210 | /* strstr("foo", "") is non-NULL */ | 
|  | 1211 | if (!strstr("ide-disk", drive->driver_req)) | 
|  | 1212 | goto failed; | 
|  | 1213 | if (!drive->present) | 
|  | 1214 | goto failed; | 
|  | 1215 | if (drive->media != ide_disk) | 
|  | 1216 | goto failed; | 
|  | 1217 |  | 
| Deepak Saxena | f5e3c2f | 2005-11-07 01:01:25 -0800 | [diff] [blame] | 1218 | idkp = kzalloc(sizeof(*idkp), GFP_KERNEL); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1219 | if (!idkp) | 
|  | 1220 | goto failed; | 
|  | 1221 |  | 
| Christoph Lameter | 1946089 | 2005-06-23 00:08:19 -0700 | [diff] [blame] | 1222 | g = alloc_disk_node(1 << PARTN_BITS, | 
| Christoph Lameter | 86b3786 | 2005-08-09 19:59:21 -0700 | [diff] [blame] | 1223 | hwif_to_node(drive->hwif)); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1224 | if (!g) | 
|  | 1225 | goto out_free_idkp; | 
|  | 1226 |  | 
|  | 1227 | ide_init_disk(g, drive); | 
|  | 1228 |  | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1229 | ide_register_subdriver(drive, &idedisk_driver); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1230 |  | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1231 | kref_init(&idkp->kref); | 
|  | 1232 |  | 
|  | 1233 | idkp->drive = drive; | 
|  | 1234 | idkp->driver = &idedisk_driver; | 
|  | 1235 | idkp->disk = g; | 
|  | 1236 |  | 
|  | 1237 | g->private_data = &idkp->driver; | 
|  | 1238 |  | 
|  | 1239 | drive->driver_data = idkp; | 
|  | 1240 |  | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1241 | idedisk_setup(drive); | 
|  | 1242 | if ((!drive->head || drive->head > 16) && !drive->select.b.lba) { | 
|  | 1243 | printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n", | 
|  | 1244 | drive->name, drive->head); | 
|  | 1245 | drive->attach = 0; | 
|  | 1246 | } else | 
|  | 1247 | drive->attach = 1; | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1248 |  | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1249 | g->minors = 1 << PARTN_BITS; | 
|  | 1250 | strcpy(g->devfs_name, drive->devfs_name); | 
|  | 1251 | g->driverfs_dev = &drive->gendev; | 
|  | 1252 | g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0; | 
|  | 1253 | set_capacity(g, idedisk_capacity(drive)); | 
|  | 1254 | g->fops = &idedisk_ops; | 
|  | 1255 | add_disk(g); | 
|  | 1256 | return 0; | 
|  | 1257 |  | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1258 | out_free_idkp: | 
|  | 1259 | kfree(idkp); | 
|  | 1260 | failed: | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1261 | return -ENODEV; | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1262 | } | 
|  | 1263 |  | 
|  | 1264 | static void __exit idedisk_exit (void) | 
|  | 1265 | { | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1266 | driver_unregister(&idedisk_driver.gen_driver); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1267 | } | 
|  | 1268 |  | 
| Bartlomiej Zolnierkiewicz | 17514e8 | 2005-11-19 22:24:35 +0100 | [diff] [blame] | 1269 | static int __init idedisk_init(void) | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1270 | { | 
| Bartlomiej Zolnierkiewicz | 8604aff | 2005-05-26 14:55:34 +0200 | [diff] [blame] | 1271 | return driver_register(&idedisk_driver.gen_driver); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1272 | } | 
|  | 1273 |  | 
|  | 1274 | module_init(idedisk_init); | 
|  | 1275 | module_exit(idedisk_exit); | 
|  | 1276 | MODULE_LICENSE("GPL"); |