| John Rigby | bd05f91 | 2008-01-29 04:28:54 +1100 | [diff] [blame] | 1 | /* |
| 2 | * MPC5121E MDS Device Tree Source |
| 3 | * |
| 4 | * Copyright 2007 Freescale Semiconductor Inc. |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify it |
| 7 | * under the terms of the GNU General Public License as published by the |
| 8 | * Free Software Foundation; either version 2 of the License, or (at your |
| 9 | * option) any later version. |
| 10 | */ |
| 11 | |
| 12 | /dts-v1/; |
| 13 | |
| 14 | / { |
| 15 | model = "mpc5121ads"; |
| 16 | compatible = "fsl,mpc5121ads"; |
| 17 | #address-cells = <1>; |
| 18 | #size-cells = <1>; |
| 19 | |
| 20 | cpus { |
| 21 | #address-cells = <1>; |
| 22 | #size-cells = <0>; |
| 23 | |
| 24 | PowerPC,5121@0 { |
| 25 | device_type = "cpu"; |
| 26 | reg = <0>; |
| 27 | d-cache-line-size = <0x20>; // 32 bytes |
| 28 | i-cache-line-size = <0x20>; // 32 bytes |
| 29 | d-cache-size = <0x8000>; // L1, 32K |
| 30 | i-cache-size = <0x8000>; // L1, 32K |
| 31 | timebase-frequency = <49500000>;// 49.5 MHz (csb/4) |
| 32 | bus-frequency = <198000000>; // 198 MHz csb bus |
| 33 | clock-frequency = <396000000>; // 396 MHz ppc core |
| 34 | }; |
| 35 | }; |
| 36 | |
| 37 | memory { |
| 38 | device_type = "memory"; |
| 39 | reg = <0x00000000 0x10000000>; // 256MB at 0 |
| 40 | }; |
| 41 | |
| 42 | localbus@80000020 { |
| 43 | compatible = "fsl,mpc5121ads-localbus"; |
| 44 | #address-cells = <2>; |
| 45 | #size-cells = <1>; |
| 46 | reg = <0x80000020 0x40>; |
| 47 | |
| 48 | ranges = <0x0 0x0 0xfc000000 0x04000000 |
| 49 | 0x2 0x0 0x82000000 0x00008000>; |
| 50 | |
| 51 | flash@0,0 { |
| 52 | compatible = "cfi-flash"; |
| 53 | reg = <0 0x0 0x4000000>; |
| 54 | bank-width = <4>; |
| 55 | device-width = <1>; |
| 56 | }; |
| 57 | |
| 58 | board-control@2,0 { |
| 59 | compatible = "fsl,mpc5121ads-cpld"; |
| 60 | reg = <0x2 0x0 0x8000>; |
| 61 | }; |
| 62 | }; |
| 63 | |
| 64 | soc@80000000 { |
| 65 | compatible = "fsl,mpc5121-immr"; |
| 66 | #address-cells = <1>; |
| 67 | #size-cells = <1>; |
| 68 | #interrupt-cells = <2>; |
| 69 | ranges = <0x0 0x80000000 0x400000>; |
| 70 | reg = <0x80000000 0x400000>; |
| 71 | bus-frequency = <66000000>; // 66 MHz ips bus |
| 72 | |
| 73 | |
| 74 | // IPIC |
| 75 | // interrupts cell = <intr #, sense> |
| 76 | // sense values match linux IORESOURCE_IRQ_* defines: |
| 77 | // sense == 8: Level, low assertion |
| 78 | // sense == 2: Edge, high-to-low change |
| 79 | // |
| 80 | ipic: interrupt-controller@c00 { |
| 81 | compatible = "fsl,mpc5121-ipic", "fsl,ipic"; |
| 82 | interrupt-controller; |
| 83 | #address-cells = <0>; |
| 84 | #interrupt-cells = <2>; |
| 85 | reg = <0xc00 0x100>; |
| 86 | }; |
| 87 | |
| 88 | // 512x PSCs are not 52xx PSCs compatible |
| 89 | // PSC3 serial port A aka ttyPSC0 |
| 90 | serial@11300 { |
| 91 | device_type = "serial"; |
| 92 | compatible = "fsl,mpc5121-psc-uart"; |
| 93 | // Logical port assignment needed until driver |
| 94 | // learns to use aliases |
| 95 | port-number = <0>; |
| 96 | cell-index = <3>; |
| 97 | reg = <0x11300 0x100>; |
| 98 | interrupts = <0x28 0x8>; // actually the fifo irq |
| 99 | interrupt-parent = < &ipic >; |
| 100 | }; |
| 101 | |
| 102 | // PSC4 serial port B aka ttyPSC1 |
| 103 | serial@11400 { |
| 104 | device_type = "serial"; |
| 105 | compatible = "fsl,mpc5121-psc-uart"; |
| 106 | // Logical port assignment needed until driver |
| 107 | // learns to use aliases |
| 108 | port-number = <1>; |
| 109 | cell-index = <4>; |
| 110 | reg = <0x11400 0x100>; |
| 111 | interrupts = <0x28 0x8>; // actually the fifo irq |
| 112 | interrupt-parent = < &ipic >; |
| 113 | }; |
| 114 | |
| 115 | pscsfifo@11f00 { |
| 116 | compatible = "fsl,mpc5121-psc-fifo"; |
| 117 | reg = <0x11f00 0x100>; |
| 118 | interrupts = <0x28 0x8>; |
| 119 | interrupt-parent = < &ipic >; |
| 120 | }; |
| 121 | }; |
| 122 | }; |