Eric Miao | bab7614 | 2009-06-29 00:20:52 -0700 | [diff] [blame^] | 1 | /* |
| 2 | * GPIO driven matrix keyboard driver |
| 3 | * |
| 4 | * Copyright (c) 2008 Marek Vasut <marek.vasut@gmail.com> |
| 5 | * |
| 6 | * Based on corgikbd.c |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License version 2 as |
| 10 | * published by the Free Software Foundation. |
| 11 | * |
| 12 | */ |
| 13 | |
| 14 | #include <linux/types.h> |
| 15 | #include <linux/delay.h> |
| 16 | #include <linux/platform_device.h> |
| 17 | #include <linux/init.h> |
| 18 | #include <linux/input.h> |
| 19 | #include <linux/irq.h> |
| 20 | #include <linux/interrupt.h> |
| 21 | #include <linux/jiffies.h> |
| 22 | #include <linux/module.h> |
| 23 | #include <linux/gpio.h> |
| 24 | #include <linux/input/matrix_keypad.h> |
| 25 | |
| 26 | struct matrix_keypad { |
| 27 | const struct matrix_keypad_platform_data *pdata; |
| 28 | struct input_dev *input_dev; |
| 29 | unsigned short *keycodes; |
| 30 | |
| 31 | uint32_t last_key_state[MATRIX_MAX_COLS]; |
| 32 | struct delayed_work work; |
| 33 | bool scan_pending; |
| 34 | bool stopped; |
| 35 | spinlock_t lock; |
| 36 | }; |
| 37 | |
| 38 | /* |
| 39 | * NOTE: normally the GPIO has to be put into HiZ when de-activated to cause |
| 40 | * minmal side effect when scanning other columns, here it is configured to |
| 41 | * be input, and it should work on most platforms. |
| 42 | */ |
| 43 | static void __activate_col(const struct matrix_keypad_platform_data *pdata, |
| 44 | int col, bool on) |
| 45 | { |
| 46 | bool level_on = !pdata->active_low; |
| 47 | |
| 48 | if (on) { |
| 49 | gpio_direction_output(pdata->col_gpios[col], level_on); |
| 50 | } else { |
| 51 | gpio_set_value_cansleep(pdata->col_gpios[col], !level_on); |
| 52 | gpio_direction_input(pdata->col_gpios[col]); |
| 53 | } |
| 54 | } |
| 55 | |
| 56 | static void activate_col(const struct matrix_keypad_platform_data *pdata, |
| 57 | int col, bool on) |
| 58 | { |
| 59 | __activate_col(pdata, col, on); |
| 60 | |
| 61 | if (on && pdata->col_scan_delay_us) |
| 62 | udelay(pdata->col_scan_delay_us); |
| 63 | } |
| 64 | |
| 65 | static void activate_all_cols(const struct matrix_keypad_platform_data *pdata, |
| 66 | bool on) |
| 67 | { |
| 68 | int col; |
| 69 | |
| 70 | for (col = 0; col < pdata->num_col_gpios; col++) |
| 71 | __activate_col(pdata, col, on); |
| 72 | } |
| 73 | |
| 74 | static bool row_asserted(const struct matrix_keypad_platform_data *pdata, |
| 75 | int row) |
| 76 | { |
| 77 | return gpio_get_value_cansleep(pdata->row_gpios[row]) ? |
| 78 | !pdata->active_low : pdata->active_low; |
| 79 | } |
| 80 | |
| 81 | static void enable_row_irqs(struct matrix_keypad *keypad) |
| 82 | { |
| 83 | const struct matrix_keypad_platform_data *pdata = keypad->pdata; |
| 84 | int i; |
| 85 | |
| 86 | for (i = 0; i < pdata->num_row_gpios; i++) |
| 87 | enable_irq(gpio_to_irq(pdata->row_gpios[i])); |
| 88 | } |
| 89 | |
| 90 | static void disable_row_irqs(struct matrix_keypad *keypad) |
| 91 | { |
| 92 | const struct matrix_keypad_platform_data *pdata = keypad->pdata; |
| 93 | int i; |
| 94 | |
| 95 | for (i = 0; i < pdata->num_row_gpios; i++) |
| 96 | disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i])); |
| 97 | } |
| 98 | |
| 99 | /* |
| 100 | * This gets the keys from keyboard and reports it to input subsystem |
| 101 | */ |
| 102 | static void matrix_keypad_scan(struct work_struct *work) |
| 103 | { |
| 104 | struct matrix_keypad *keypad = |
| 105 | container_of(work, struct matrix_keypad, work.work); |
| 106 | struct input_dev *input_dev = keypad->input_dev; |
| 107 | const struct matrix_keypad_platform_data *pdata = keypad->pdata; |
| 108 | uint32_t new_state[MATRIX_MAX_COLS]; |
| 109 | int row, col, code; |
| 110 | |
| 111 | /* de-activate all columns for scanning */ |
| 112 | activate_all_cols(pdata, false); |
| 113 | |
| 114 | memset(new_state, 0, sizeof(new_state)); |
| 115 | |
| 116 | /* assert each column and read the row status out */ |
| 117 | for (col = 0; col < pdata->num_col_gpios; col++) { |
| 118 | |
| 119 | activate_col(pdata, col, true); |
| 120 | |
| 121 | for (row = 0; row < pdata->num_row_gpios; row++) |
| 122 | new_state[col] |= |
| 123 | row_asserted(pdata, row) ? (1 << row) : 0; |
| 124 | |
| 125 | activate_col(pdata, col, false); |
| 126 | } |
| 127 | |
| 128 | for (col = 0; col < pdata->num_col_gpios; col++) { |
| 129 | uint32_t bits_changed; |
| 130 | |
| 131 | bits_changed = keypad->last_key_state[col] ^ new_state[col]; |
| 132 | if (bits_changed == 0) |
| 133 | continue; |
| 134 | |
| 135 | for (row = 0; row < pdata->num_row_gpios; row++) { |
| 136 | if ((bits_changed & (1 << row)) == 0) |
| 137 | continue; |
| 138 | |
| 139 | code = (row << 4) + col; |
| 140 | input_event(input_dev, EV_MSC, MSC_SCAN, code); |
| 141 | input_report_key(input_dev, |
| 142 | keypad->keycodes[code], |
| 143 | new_state[col] & (1 << row)); |
| 144 | } |
| 145 | } |
| 146 | input_sync(input_dev); |
| 147 | |
| 148 | memcpy(keypad->last_key_state, new_state, sizeof(new_state)); |
| 149 | |
| 150 | activate_all_cols(pdata, true); |
| 151 | |
| 152 | /* Enable IRQs again */ |
| 153 | spin_lock_irq(&keypad->lock); |
| 154 | keypad->scan_pending = false; |
| 155 | enable_row_irqs(keypad); |
| 156 | spin_unlock_irq(&keypad->lock); |
| 157 | } |
| 158 | |
| 159 | static irqreturn_t matrix_keypad_interrupt(int irq, void *id) |
| 160 | { |
| 161 | struct matrix_keypad *keypad = id; |
| 162 | unsigned long flags; |
| 163 | |
| 164 | spin_lock_irqsave(&keypad->lock, flags); |
| 165 | |
| 166 | /* |
| 167 | * See if another IRQ beaten us to it and scheduled the |
| 168 | * scan already. In that case we should not try to |
| 169 | * disable IRQs again. |
| 170 | */ |
| 171 | if (unlikely(keypad->scan_pending || keypad->stopped)) |
| 172 | goto out; |
| 173 | |
| 174 | disable_row_irqs(keypad); |
| 175 | keypad->scan_pending = true; |
| 176 | schedule_delayed_work(&keypad->work, |
| 177 | msecs_to_jiffies(keypad->pdata->debounce_ms)); |
| 178 | |
| 179 | out: |
| 180 | spin_unlock_irqrestore(&keypad->lock, flags); |
| 181 | return IRQ_HANDLED; |
| 182 | } |
| 183 | |
| 184 | static int matrix_keypad_start(struct input_dev *dev) |
| 185 | { |
| 186 | struct matrix_keypad *keypad = input_get_drvdata(dev); |
| 187 | |
| 188 | keypad->stopped = false; |
| 189 | mb(); |
| 190 | |
| 191 | /* |
| 192 | * Schedule an immediate key scan to capture current key state; |
| 193 | * columns will be activated and IRQs be enabled after the scan. |
| 194 | */ |
| 195 | schedule_delayed_work(&keypad->work, 0); |
| 196 | |
| 197 | return 0; |
| 198 | } |
| 199 | |
| 200 | static void matrix_keypad_stop(struct input_dev *dev) |
| 201 | { |
| 202 | struct matrix_keypad *keypad = input_get_drvdata(dev); |
| 203 | |
| 204 | keypad->stopped = true; |
| 205 | mb(); |
| 206 | flush_work(&keypad->work.work); |
| 207 | /* |
| 208 | * matrix_keypad_scan() will leave IRQs enabled; |
| 209 | * we should disable them now. |
| 210 | */ |
| 211 | disable_row_irqs(keypad); |
| 212 | } |
| 213 | |
| 214 | #ifdef CONFIG_PM |
| 215 | static int matrix_keypad_suspend(struct platform_device *pdev, pm_message_t state) |
| 216 | { |
| 217 | struct matrix_keypad *keypad = platform_get_drvdata(pdev); |
| 218 | const struct matrix_keypad_platform_data *pdata = keypad->pdata; |
| 219 | int i; |
| 220 | |
| 221 | matrix_keypad_stop(keypad->input_dev); |
| 222 | |
| 223 | if (device_may_wakeup(&pdev->dev)) |
| 224 | for (i = 0; i < pdata->num_row_gpios; i++) |
| 225 | enable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); |
| 226 | |
| 227 | return 0; |
| 228 | } |
| 229 | |
| 230 | static int matrix_keypad_resume(struct platform_device *pdev) |
| 231 | { |
| 232 | struct matrix_keypad *keypad = platform_get_drvdata(pdev); |
| 233 | const struct matrix_keypad_platform_data *pdata = keypad->pdata; |
| 234 | int i; |
| 235 | |
| 236 | if (device_may_wakeup(&pdev->dev)) |
| 237 | for (i = 0; i < pdata->num_row_gpios; i++) |
| 238 | disable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); |
| 239 | |
| 240 | matrix_keypad_start(keypad->input_dev); |
| 241 | |
| 242 | return 0; |
| 243 | } |
| 244 | #else |
| 245 | #define matrix_keypad_suspend NULL |
| 246 | #define matrix_keypad_resume NULL |
| 247 | #endif |
| 248 | |
| 249 | static int __devinit init_matrix_gpio(struct platform_device *pdev, |
| 250 | struct matrix_keypad *keypad) |
| 251 | { |
| 252 | const struct matrix_keypad_platform_data *pdata = keypad->pdata; |
| 253 | int i, err = -EINVAL; |
| 254 | |
| 255 | /* initialized strobe lines as outputs, activated */ |
| 256 | for (i = 0; i < pdata->num_col_gpios; i++) { |
| 257 | err = gpio_request(pdata->col_gpios[i], "matrix_kbd_col"); |
| 258 | if (err) { |
| 259 | dev_err(&pdev->dev, |
| 260 | "failed to request GPIO%d for COL%d\n", |
| 261 | pdata->col_gpios[i], i); |
| 262 | goto err_free_cols; |
| 263 | } |
| 264 | |
| 265 | gpio_direction_output(pdata->col_gpios[i], !pdata->active_low); |
| 266 | } |
| 267 | |
| 268 | for (i = 0; i < pdata->num_row_gpios; i++) { |
| 269 | err = gpio_request(pdata->row_gpios[i], "matrix_kbd_row"); |
| 270 | if (err) { |
| 271 | dev_err(&pdev->dev, |
| 272 | "failed to request GPIO%d for ROW%d\n", |
| 273 | pdata->row_gpios[i], i); |
| 274 | goto err_free_rows; |
| 275 | } |
| 276 | |
| 277 | gpio_direction_input(pdata->row_gpios[i]); |
| 278 | } |
| 279 | |
| 280 | for (i = 0; i < pdata->num_row_gpios; i++) { |
| 281 | err = request_irq(gpio_to_irq(pdata->row_gpios[i]), |
| 282 | matrix_keypad_interrupt, |
| 283 | IRQF_DISABLED | |
| 284 | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| 285 | "matrix-keypad", keypad); |
| 286 | if (err) { |
| 287 | dev_err(&pdev->dev, |
| 288 | "Unable to acquire interrupt for GPIO line %i\n", |
| 289 | pdata->row_gpios[i]); |
| 290 | goto err_free_irqs; |
| 291 | } |
| 292 | } |
| 293 | |
| 294 | /* initialized as disabled - enabled by input->open */ |
| 295 | disable_row_irqs(keypad); |
| 296 | return 0; |
| 297 | |
| 298 | err_free_irqs: |
| 299 | while (--i >= 0) |
| 300 | free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); |
| 301 | i = pdata->num_row_gpios; |
| 302 | err_free_rows: |
| 303 | while (--i >= 0) |
| 304 | gpio_free(pdata->row_gpios[i]); |
| 305 | i = pdata->num_col_gpios; |
| 306 | err_free_cols: |
| 307 | while (--i >= 0) |
| 308 | gpio_free(pdata->col_gpios[i]); |
| 309 | |
| 310 | return err; |
| 311 | } |
| 312 | |
| 313 | static int __devinit matrix_keypad_probe(struct platform_device *pdev) |
| 314 | { |
| 315 | const struct matrix_keypad_platform_data *pdata; |
| 316 | const struct matrix_keymap_data *keymap_data; |
| 317 | struct matrix_keypad *keypad; |
| 318 | struct input_dev *input_dev; |
| 319 | unsigned short *keycodes; |
| 320 | int i; |
| 321 | int err; |
| 322 | |
| 323 | pdata = pdev->dev.platform_data; |
| 324 | if (!pdata) { |
| 325 | dev_err(&pdev->dev, "no platform data defined\n"); |
| 326 | return -EINVAL; |
| 327 | } |
| 328 | |
| 329 | keymap_data = pdata->keymap_data; |
| 330 | if (!keymap_data) { |
| 331 | dev_err(&pdev->dev, "no keymap data defined\n"); |
| 332 | return -EINVAL; |
| 333 | } |
| 334 | |
| 335 | if (!keymap_data->max_keymap_size) { |
| 336 | dev_err(&pdev->dev, "invalid keymap data supplied\n"); |
| 337 | return -EINVAL; |
| 338 | } |
| 339 | |
| 340 | keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL); |
| 341 | keycodes = kzalloc(keymap_data->max_keymap_size * |
| 342 | sizeof(keypad->keycodes), |
| 343 | GFP_KERNEL); |
| 344 | input_dev = input_allocate_device(); |
| 345 | if (!keypad || !keycodes || !input_dev) { |
| 346 | err = -ENOMEM; |
| 347 | goto err_free_mem; |
| 348 | } |
| 349 | |
| 350 | keypad->input_dev = input_dev; |
| 351 | keypad->pdata = pdata; |
| 352 | keypad->keycodes = keycodes; |
| 353 | keypad->stopped = true; |
| 354 | INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan); |
| 355 | spin_lock_init(&keypad->lock); |
| 356 | |
| 357 | input_dev->name = pdev->name; |
| 358 | input_dev->id.bustype = BUS_HOST; |
| 359 | input_dev->dev.parent = &pdev->dev; |
| 360 | input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); |
| 361 | input_dev->open = matrix_keypad_start; |
| 362 | input_dev->close = matrix_keypad_stop; |
| 363 | |
| 364 | input_dev->keycode = keycodes; |
| 365 | input_dev->keycodesize = sizeof(*keycodes); |
| 366 | input_dev->keycodemax = keymap_data->max_keymap_size; |
| 367 | |
| 368 | for (i = 0; i < keymap_data->keymap_size; i++) { |
| 369 | unsigned int key = keymap_data->keymap[i]; |
| 370 | unsigned int row = KEY_ROW(key); |
| 371 | unsigned int col = KEY_COL(key); |
| 372 | unsigned short code = KEY_VAL(key); |
| 373 | |
| 374 | keycodes[(row << 4) + col] = code; |
| 375 | __set_bit(code, input_dev->keybit); |
| 376 | } |
| 377 | __clear_bit(KEY_RESERVED, input_dev->keybit); |
| 378 | |
| 379 | input_set_capability(input_dev, EV_MSC, MSC_SCAN); |
| 380 | input_set_drvdata(input_dev, keypad); |
| 381 | |
| 382 | err = init_matrix_gpio(pdev, keypad); |
| 383 | if (err) |
| 384 | goto err_free_mem; |
| 385 | |
| 386 | err = input_register_device(keypad->input_dev); |
| 387 | if (err) |
| 388 | goto err_free_mem; |
| 389 | |
| 390 | device_init_wakeup(&pdev->dev, pdata->wakeup); |
| 391 | platform_set_drvdata(pdev, keypad); |
| 392 | |
| 393 | return 0; |
| 394 | |
| 395 | err_free_mem: |
| 396 | input_free_device(input_dev); |
| 397 | kfree(keycodes); |
| 398 | kfree(keypad); |
| 399 | return err; |
| 400 | } |
| 401 | |
| 402 | static int __devexit matrix_keypad_remove(struct platform_device *pdev) |
| 403 | { |
| 404 | struct matrix_keypad *keypad = platform_get_drvdata(pdev); |
| 405 | const struct matrix_keypad_platform_data *pdata = keypad->pdata; |
| 406 | int i; |
| 407 | |
| 408 | device_init_wakeup(&pdev->dev, 0); |
| 409 | |
| 410 | for (i = 0; i < pdata->num_row_gpios; i++) { |
| 411 | free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); |
| 412 | gpio_free(pdata->row_gpios[i]); |
| 413 | } |
| 414 | |
| 415 | for (i = 0; i < pdata->num_col_gpios; i++) |
| 416 | gpio_free(pdata->col_gpios[i]); |
| 417 | |
| 418 | input_unregister_device(keypad->input_dev); |
| 419 | platform_set_drvdata(pdev, NULL); |
| 420 | kfree(keypad->keycodes); |
| 421 | kfree(keypad); |
| 422 | |
| 423 | return 0; |
| 424 | } |
| 425 | |
| 426 | static struct platform_driver matrix_keypad_driver = { |
| 427 | .probe = matrix_keypad_probe, |
| 428 | .remove = __devexit_p(matrix_keypad_remove), |
| 429 | .suspend = matrix_keypad_suspend, |
| 430 | .resume = matrix_keypad_resume, |
| 431 | .driver = { |
| 432 | .name = "matrix-keypad", |
| 433 | .owner = THIS_MODULE, |
| 434 | }, |
| 435 | }; |
| 436 | |
| 437 | static int __init matrix_keypad_init(void) |
| 438 | { |
| 439 | return platform_driver_register(&matrix_keypad_driver); |
| 440 | } |
| 441 | |
| 442 | static void __exit matrix_keypad_exit(void) |
| 443 | { |
| 444 | platform_driver_unregister(&matrix_keypad_driver); |
| 445 | } |
| 446 | |
| 447 | module_init(matrix_keypad_init); |
| 448 | module_exit(matrix_keypad_exit); |
| 449 | |
| 450 | MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); |
| 451 | MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver"); |
| 452 | MODULE_LICENSE("GPL v2"); |
| 453 | MODULE_ALIAS("platform:matrix-keypad"); |