| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 1 | menu "Board support" | 
 | 2 |  | 
 | 3 | config SOLUTION_ENGINE | 
 | 4 | 	bool | 
 | 5 |  | 
| Paul Mundt | 704bf31 | 2011-01-13 18:31:25 +0900 | [diff] [blame] | 6 | config SH_ALPHA_BOARD | 
 | 7 | 	bool | 
 | 8 |  | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 9 | config SH_SOLUTION_ENGINE | 
 | 10 | 	bool "SolutionEngine" | 
 | 11 | 	select SOLUTION_ENGINE | 
 | 12 | 	select CPU_HAS_IPR_IRQ | 
 | 13 | 	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ | 
 | 14 | 	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ | 
 | 15 | 	  CPU_SUBTYPE_SH7750R  | 
 | 16 | 	help | 
 | 17 | 	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, | 
 | 18 | 	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. | 
 | 19 |  | 
 | 20 | config SH_7206_SOLUTION_ENGINE | 
 | 21 | 	bool "SolutionEngine7206" | 
 | 22 | 	select SOLUTION_ENGINE | 
 | 23 | 	depends on CPU_SUBTYPE_SH7206 | 
 | 24 | 	help | 
 | 25 | 	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206 | 
 | 26 | 	  evaluation board. | 
 | 27 |  | 
 | 28 | config SH_7619_SOLUTION_ENGINE | 
 | 29 | 	bool "SolutionEngine7619" | 
 | 30 | 	select SOLUTION_ENGINE | 
 | 31 | 	depends on CPU_SUBTYPE_SH7619 | 
 | 32 | 	help | 
 | 33 | 	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619 | 
 | 34 | 	  evaluation board. | 
 | 35 | 	 | 
 | 36 | config SH_7721_SOLUTION_ENGINE | 
 | 37 | 	bool "SolutionEngine7721" | 
 | 38 | 	select SOLUTION_ENGINE | 
 | 39 | 	depends on CPU_SUBTYPE_SH7721 | 
 | 40 | 	help | 
 | 41 | 	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721 | 
 | 42 | 	  evaluation board. | 
 | 43 |  | 
 | 44 | config SH_7722_SOLUTION_ENGINE | 
 | 45 | 	bool "SolutionEngine7722" | 
 | 46 | 	select SOLUTION_ENGINE | 
 | 47 | 	depends on CPU_SUBTYPE_SH7722 | 
 | 48 | 	help | 
 | 49 | 	  Select 7722 SolutionEngine if configuring for a Hitachi SH772 | 
 | 50 | 	  evaluation board. | 
 | 51 |  | 
| Kuninori Morimoto | 287c129 | 2009-05-26 07:04:52 +0000 | [diff] [blame] | 52 | config SH_7724_SOLUTION_ENGINE | 
 | 53 | 	bool "SolutionEngine7724" | 
 | 54 | 	select SOLUTION_ENGINE | 
 | 55 | 	depends on CPU_SUBTYPE_SH7724 | 
 | 56 | 	select ARCH_REQUIRE_GPIOLIB | 
 | 57 | 	help | 
 | 58 | 	  Select 7724 SolutionEngine if configuring for a Hitachi SH7724 | 
 | 59 | 	  evaluation board. | 
 | 60 |  | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 61 | config SH_7751_SOLUTION_ENGINE | 
 | 62 | 	bool "SolutionEngine7751" | 
 | 63 | 	select SOLUTION_ENGINE | 
 | 64 | 	select CPU_HAS_IPR_IRQ | 
 | 65 | 	depends on CPU_SUBTYPE_SH7751 | 
 | 66 | 	help | 
 | 67 | 	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751 | 
 | 68 | 	  evaluation board. | 
 | 69 | 	   | 
 | 70 | config SH_7780_SOLUTION_ENGINE | 
 | 71 | 	bool "SolutionEngine7780" | 
 | 72 | 	select SOLUTION_ENGINE | 
 | 73 | 	select SYS_SUPPORTS_PCI | 
 | 74 | 	depends on CPU_SUBTYPE_SH7780 | 
 | 75 | 	help | 
 | 76 | 	  Select 7780 SolutionEngine if configuring for a Renesas SH7780 | 
 | 77 | 	  evaluation board. | 
 | 78 |  | 
 | 79 | config SH_7343_SOLUTION_ENGINE | 
 | 80 | 	bool "SolutionEngine7343" | 
 | 81 | 	select SOLUTION_ENGINE | 
 | 82 | 	depends on CPU_SUBTYPE_SH7343 | 
 | 83 | 	help | 
 | 84 | 	  Select 7343 SolutionEngine if configuring for a Hitachi | 
 | 85 | 	  SH7343 (SH-Mobile 3AS) evaluation board. | 
 | 86 |  | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 87 | config SH_HP6XX | 
 | 88 | 	bool "HP6XX" | 
 | 89 | 	select SYS_SUPPORTS_APM_EMULATION | 
 | 90 | 	select HD6446X_SERIES | 
 | 91 | 	depends on CPU_SUBTYPE_SH7709 | 
 | 92 | 	help | 
 | 93 | 	  Select HP6XX if configuring for a HP jornada HP6xx. | 
 | 94 | 	  More information (hardware only) at | 
 | 95 | 	  <http://www.hp.com/jornada/>. | 
 | 96 |  | 
 | 97 | config SH_DREAMCAST | 
 | 98 | 	bool "Dreamcast" | 
 | 99 | 	select SYS_SUPPORTS_PCI | 
 | 100 | 	depends on CPU_SUBTYPE_SH7091 | 
 | 101 | 	help | 
 | 102 | 	  Select Dreamcast if configuring for a SEGA Dreamcast. | 
 | 103 | 	  More information at <http://www.linux-sh.org> | 
 | 104 |  | 
 | 105 | config SH_SH03 | 
 | 106 | 	bool "Interface CTP/PCI-SH03" | 
 | 107 | 	depends on CPU_SUBTYPE_SH7751 | 
 | 108 | 	select CPU_HAS_IPR_IRQ | 
 | 109 | 	select SYS_SUPPORTS_PCI | 
 | 110 | 	help | 
 | 111 | 	  CTP/PCI-SH03 is a CPU module computer that is produced | 
 | 112 | 	  by Interface Corporation. | 
 | 113 | 	  More information at <http://www.interface.co.jp> | 
 | 114 |  | 
 | 115 | config SH_SECUREEDGE5410 | 
 | 116 | 	bool "SecureEdge5410" | 
 | 117 | 	depends on CPU_SUBTYPE_SH7751R | 
 | 118 | 	select CPU_HAS_IPR_IRQ | 
 | 119 | 	select SYS_SUPPORTS_PCI | 
 | 120 | 	help | 
 | 121 | 	  Select SecureEdge5410 if configuring for a SnapGear SH board. | 
 | 122 | 	  This includes both the OEM SecureEdge products as well as the | 
 | 123 | 	  SME product line. | 
 | 124 |  | 
 | 125 | config SH_RTS7751R2D | 
 | 126 | 	bool "RTS7751R2D" | 
 | 127 | 	depends on CPU_SUBTYPE_SH7751R | 
 | 128 | 	select SYS_SUPPORTS_PCI | 
| Magnus Damm | e6be3a2 | 2009-04-30 12:56:37 +0900 | [diff] [blame] | 129 | 	select IO_TRAPPED if MMU | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 130 | 	help | 
 | 131 | 	  Select RTS7751R2D if configuring for a Renesas Technology | 
 | 132 | 	  Sales SH-Graphics board. | 
 | 133 |  | 
| Paul Mundt | ea0aac1 | 2008-12-08 14:32:03 +0900 | [diff] [blame] | 134 | config SH_RSK | 
 | 135 | 	bool "Renesas Starter Kit" | 
 | 136 | 	depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 | 
 | 137 | 	help | 
 | 138 | 	 Select this option if configuring for any of the RSK+ MCU | 
 | 139 | 	 evaluation platforms. | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 140 |  | 
 | 141 | config SH_SDK7780 | 
 | 142 | 	bool "SDK7780R3" | 
 | 143 | 	depends on CPU_SUBTYPE_SH7780 | 
 | 144 | 	select SYS_SUPPORTS_PCI | 
 | 145 | 	help | 
 | 146 | 	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 | 
 | 147 | 	  evaluation board. | 
 | 148 |  | 
| Paul Mundt | 02bf6cc | 2010-01-14 20:58:58 +0900 | [diff] [blame] | 149 | config SH_SDK7786 | 
 | 150 | 	bool "SDK7786" | 
 | 151 | 	depends on CPU_SUBTYPE_SH7786 | 
| Paul Mundt | 7dcaa8e | 2010-01-15 19:13:56 +0900 | [diff] [blame] | 152 | 	select SYS_SUPPORTS_PCI | 
| Paul Mundt | 2422397 | 2010-05-25 20:10:24 +0900 | [diff] [blame] | 153 | 	select NO_IOPORT if !PCI | 
| Paul Mundt | 47da88f | 2010-10-14 03:04:44 +0900 | [diff] [blame] | 154 | 	select ARCH_WANT_OPTIONAL_GPIOLIB | 
| Paul Mundt | d8d6b90 | 2010-10-15 02:13:04 +0900 | [diff] [blame] | 155 | 	select HAVE_SRAM_POOL | 
| Paul Mundt | 02bf6cc | 2010-01-14 20:58:58 +0900 | [diff] [blame] | 156 | 	help | 
 | 157 | 	  Select SDK7786 if configuring for a Renesas Technology Europe | 
 | 158 | 	  SH7786-65nm board. | 
 | 159 |  | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 160 | config SH_HIGHLANDER | 
 | 161 | 	bool "Highlander" | 
 | 162 | 	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 | 
 | 163 | 	select SYS_SUPPORTS_PCI | 
| Magnus Damm | e6be3a2 | 2009-04-30 12:56:37 +0900 | [diff] [blame] | 164 | 	select IO_TRAPPED if MMU | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 165 |  | 
| Yoshihiro Shimoda | 36239c6 | 2010-07-06 04:32:16 +0000 | [diff] [blame] | 166 | config SH_SH7757LCR | 
 | 167 | 	bool "SH7757LCR" | 
 | 168 | 	depends on CPU_SUBTYPE_SH7757 | 
 | 169 | 	select ARCH_REQUIRE_GPIOLIB | 
 | 170 |  | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 171 | config SH_SH7785LCR | 
 | 172 | 	bool "SH7785LCR" | 
 | 173 | 	depends on CPU_SUBTYPE_SH7785 | 
 | 174 | 	select SYS_SUPPORTS_PCI | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 175 |  | 
 | 176 | config SH_SH7785LCR_29BIT_PHYSMAPS | 
 | 177 | 	bool "SH7785LCR 29bit physmaps" | 
| Yoshihiro Shimoda | df4d4f1 | 2009-03-10 15:50:44 +0900 | [diff] [blame] | 178 | 	depends on SH_SH7785LCR && 29BIT | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 179 | 	default y | 
 | 180 | 	help | 
 | 181 | 	  This board has 2 physical memory maps. It can be changed with | 
 | 182 | 	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, | 
 | 183 | 	  you can access all on-board device in 29bit address mode. | 
 | 184 |  | 
| Yoshihiro Shimoda | e79d574 | 2009-08-27 13:57:26 +0000 | [diff] [blame] | 185 | config SH_SH7785LCR_PT | 
 | 186 | 	bool "SH7785LCR prototype board on 32-bit MMU mode" | 
 | 187 | 	depends on SH_SH7785LCR && 32BIT | 
 | 188 | 	default n | 
 | 189 | 	help | 
 | 190 | 	  If you use prototype board, this option is enabled. | 
 | 191 |  | 
| Kuninori Morimoto | 5ac072e | 2009-03-03 16:22:00 +0900 | [diff] [blame] | 192 | config SH_URQUELL | 
 | 193 | 	bool "Urquell" | 
 | 194 | 	depends on CPU_SUBTYPE_SH7786 | 
 | 195 | 	select ARCH_REQUIRE_GPIOLIB | 
| Paul Mundt | 5713e60 | 2009-06-17 18:20:48 +0900 | [diff] [blame] | 196 | 	select SYS_SUPPORTS_PCI | 
| Paul Mundt | 861160b | 2010-05-26 15:58:45 +0900 | [diff] [blame] | 197 | 	select NO_IOPORT if !PCI | 
| Kuninori Morimoto | 5ac072e | 2009-03-03 16:22:00 +0900 | [diff] [blame] | 198 |  | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 199 | config SH_MIGOR | 
 | 200 | 	bool "Migo-R" | 
 | 201 | 	depends on CPU_SUBTYPE_SH7722 | 
| Magnus Damm | 69edbba | 2008-12-25 18:17:34 +0900 | [diff] [blame] | 202 | 	select ARCH_REQUIRE_GPIOLIB | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 203 | 	help | 
 | 204 | 	  Select Migo-R if configuring for the SH7722 Migo-R platform | 
 | 205 |           by Renesas System Solutions Asia Pte. Ltd. | 
 | 206 |  | 
 | 207 | config SH_AP325RXA | 
 | 208 | 	bool "AP-325RXA" | 
 | 209 | 	depends on CPU_SUBTYPE_SH7723 | 
| Magnus Damm | 69edbba | 2008-12-25 18:17:34 +0900 | [diff] [blame] | 210 | 	select ARCH_REQUIRE_GPIOLIB | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 211 | 	help | 
 | 212 | 	  Renesas "AP-325RXA" support. | 
 | 213 | 	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" | 
 | 214 |  | 
| Magnus Damm | e7d1651 | 2009-07-22 16:20:54 +0000 | [diff] [blame] | 215 | config SH_KFR2R09 | 
 | 216 | 	bool "KFR2R09" | 
 | 217 | 	depends on CPU_SUBTYPE_SH7724 | 
 | 218 | 	select ARCH_REQUIRE_GPIOLIB | 
 | 219 | 	help | 
 | 220 | 	  "Kit For R2R for 2009" support. | 
 | 221 |  | 
| Kuninori Morimoto | 4138b74 | 2009-08-19 12:08:33 +0000 | [diff] [blame] | 222 | config SH_ECOVEC | 
 | 223 | 	bool "EcoVec" | 
 | 224 | 	depends on CPU_SUBTYPE_SH7724 | 
 | 225 | 	select ARCH_REQUIRE_GPIOLIB | 
 | 226 | 	help | 
 | 227 | 	  Renesas "R0P7724LC0011/21RL (EcoVec)" support. | 
 | 228 |  | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 229 | config SH_SH7763RDP | 
 | 230 | 	bool "SH7763RDP" | 
 | 231 | 	depends on CPU_SUBTYPE_SH7763 | 
 | 232 | 	help | 
 | 233 | 	  Select SH7763RDP if configuring for a Renesas SH7763 | 
 | 234 | 	  evaluation board. | 
 | 235 |  | 
| Nobuhiro Iwamatsu | 32910e2 | 2009-03-17 05:54:37 +0000 | [diff] [blame] | 236 | config SH_ESPT | 
 | 237 | 	bool "ESPT" | 
 | 238 | 	depends on CPU_SUBTYPE_SH7763 | 
 | 239 | 	help | 
 | 240 | 	  Select ESPT if configuring for a Renesas SH7763 | 
 | 241 | 	  with gigabit ether evaluation board. | 
 | 242 |  | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 243 | config SH_EDOSK7705 | 
 | 244 | 	bool "EDOSK7705" | 
 | 245 | 	depends on CPU_SUBTYPE_SH7705 | 
 | 246 |  | 
| Luca Santini | 3db9170 | 2008-09-08 12:01:15 +0900 | [diff] [blame] | 247 | config SH_EDOSK7760 | 
 | 248 | 	bool "EDOSK7760" | 
 | 249 | 	depends on CPU_SUBTYPE_SH7760 | 
 | 250 | 	help | 
 | 251 | 	  Select if configuring for a Renesas EDOSK7760 | 
 | 252 | 	  evaluation board. | 
 | 253 |  | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 254 | config SH_SH4202_MICRODEV | 
 | 255 | 	bool "SH4-202 MicroDev" | 
 | 256 | 	depends on CPU_SUBTYPE_SH4_202 | 
 | 257 | 	help | 
 | 258 | 	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board | 
 | 259 | 	  with an SH4-202 CPU. | 
 | 260 |  | 
 | 261 | config SH_LANDISK | 
 | 262 | 	bool "LANDISK" | 
 | 263 | 	depends on CPU_SUBTYPE_SH7751R | 
 | 264 | 	select SYS_SUPPORTS_PCI | 
 | 265 | 	help | 
 | 266 | 	  I-O DATA DEVICE, INC. "LANDISK Series" support. | 
 | 267 |  | 
 | 268 | config SH_TITAN | 
 | 269 | 	bool "TITAN" | 
 | 270 | 	depends on CPU_SUBTYPE_SH7751R | 
 | 271 | 	select CPU_HAS_IPR_IRQ | 
 | 272 | 	select SYS_SUPPORTS_PCI | 
 | 273 | 	help | 
 | 274 | 	  Select Titan if you are configuring for a Nimble Microsystems | 
 | 275 | 	  NetEngine NP51R. | 
 | 276 |  | 
 | 277 | config SH_SHMIN | 
 | 278 | 	bool "SHMIN" | 
 | 279 | 	depends on CPU_SUBTYPE_SH7706 | 
 | 280 | 	select CPU_HAS_IPR_IRQ | 
 | 281 | 	help | 
 | 282 | 	  Select SHMIN if configuring for the SHMIN board. | 
 | 283 |  | 
 | 284 | config SH_LBOX_RE2 | 
 | 285 | 	bool "L-BOX RE2" | 
 | 286 | 	depends on CPU_SUBTYPE_SH7751R | 
 | 287 | 	select SYS_SUPPORTS_PCI | 
 | 288 | 	help | 
 | 289 | 	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. | 
 | 290 |  | 
 | 291 | config SH_X3PROTO | 
 | 292 | 	bool "SH-X3 Prototype board" | 
 | 293 | 	depends on CPU_SUBTYPE_SHX3 | 
| Paul Mundt | 861160b | 2010-05-26 15:58:45 +0900 | [diff] [blame] | 294 | 	select NO_IOPORT if !PCI | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 295 |  | 
 | 296 | config SH_MAGIC_PANEL_R2 | 
 | 297 | 	bool "Magic Panel R2" | 
 | 298 | 	depends on CPU_SUBTYPE_SH7720 | 
| Paul Mundt | ae5e6d0 | 2009-01-07 17:16:25 +0900 | [diff] [blame] | 299 | 	select ARCH_REQUIRE_GPIOLIB | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 300 | 	help | 
 | 301 | 	  Select Magic Panel R2 if configuring for Magic Panel R2. | 
 | 302 |  | 
 | 303 | config SH_CAYMAN | 
 | 304 | 	bool "Hitachi Cayman" | 
 | 305 | 	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 | 
 | 306 | 	select SYS_SUPPORTS_PCI | 
 | 307 |  | 
| Steve Glendinning | eaeed5d | 2009-03-20 14:16:29 +0000 | [diff] [blame] | 308 | config SH_POLARIS | 
 | 309 | 	bool "SMSC Polaris" | 
 | 310 | 	select CPU_HAS_IPR_IRQ | 
 | 311 | 	depends on CPU_SUBTYPE_SH7709 | 
 | 312 | 	help | 
 | 313 | 	  Select if configuring for an SMSC Polaris development board | 
 | 314 |  | 
| Hitoshi Mitake | 3a59826 | 2010-06-21 15:10:51 +0900 | [diff] [blame] | 315 | config SH_SH2007 | 
 | 316 | 	bool "SH-2007 board" | 
 | 317 | 	select NO_IOPORT | 
 | 318 | 	depends on CPU_SUBTYPE_SH7780 | 
 | 319 | 	help | 
 | 320 | 	  SH-2007 is a single-board computer based around SH7780 chip | 
 | 321 | 	  intended for embedded applications. | 
 | 322 | 	  It has an Ethernet interface (SMC9118), direct connected | 
 | 323 | 	  Compact Flash socket, two serial ports and PC-104 bus. | 
 | 324 | 	  More information at <http://sh2000.sh-linux.org>. | 
 | 325 |  | 
| Paul Mundt | bc34b08 | 2011-01-13 18:32:42 +0900 | [diff] [blame^] | 326 | config SH_APSH4A3A | 
 | 327 | 	bool "AP-SH4A-3A" | 
 | 328 | 	select SH_ALPHA_BOARD | 
 | 329 | 	depends on CPU_SUBTYPE_SH7785 | 
 | 330 | 	help | 
 | 331 | 	  Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A. | 
 | 332 |  | 
| Paul Mundt | 939a24a | 2008-07-29 21:41:37 +0900 | [diff] [blame] | 333 | endmenu | 
 | 334 |  | 
 | 335 | source "arch/sh/boards/mach-r2d/Kconfig" | 
 | 336 | source "arch/sh/boards/mach-highlander/Kconfig" | 
 | 337 | source "arch/sh/boards/mach-sdk7780/Kconfig" | 
 | 338 | source "arch/sh/boards/mach-migor/Kconfig" | 
| Paul Mundt | ea0aac1 | 2008-12-08 14:32:03 +0900 | [diff] [blame] | 339 | source "arch/sh/boards/mach-rsk/Kconfig" | 
| Paul Mundt | c8b5d9d | 2008-07-30 00:13:39 +0900 | [diff] [blame] | 340 |  | 
 | 341 | if SH_MAGIC_PANEL_R2 | 
 | 342 |  | 
 | 343 | menu "Magic Panel R2 options" | 
 | 344 |  | 
 | 345 | config SH_MAGIC_PANEL_R2_VERSION | 
 | 346 | 	int SH_MAGIC_PANEL_R2_VERSION | 
 | 347 | 	default "3" | 
 | 348 | 	help | 
 | 349 | 	  Set the version of the Magic Panel R2 | 
 | 350 |  | 
 | 351 | endmenu | 
 | 352 |  | 
 | 353 | endif |