| Brian Murphy | 1f21d2b | 2007-08-21 22:34:16 +0200 | [diff] [blame] | 1 | /* | 
 | 2 |  * Atmel AT93C46 serial eeprom driver | 
 | 3 |  * | 
 | 4 |  * Brian Murphy <brian.murphy@eicon.com> | 
 | 5 |  * | 
 | 6 |  */ | 
 | 7 | #include <linux/kernel.h> | 
 | 8 | #include <linux/delay.h> | 
 | 9 | #include <asm/lasat/lasat.h> | 
 | 10 | #include <linux/module.h> | 
 | 11 | #include <linux/init.h> | 
 | 12 |  | 
 | 13 | #include "at93c.h" | 
 | 14 |  | 
 | 15 | #define AT93C_ADDR_SHIFT	7 | 
 | 16 | #define AT93C_ADDR_MAX		((1 << AT93C_ADDR_SHIFT) - 1) | 
 | 17 | #define AT93C_RCMD		(0x6 << AT93C_ADDR_SHIFT) | 
 | 18 | #define AT93C_WCMD		(0x5 << AT93C_ADDR_SHIFT) | 
 | 19 | #define AT93C_WENCMD		0x260 | 
 | 20 | #define AT93C_WDSCMD		0x200 | 
 | 21 |  | 
 | 22 | struct at93c_defs *at93c; | 
 | 23 |  | 
 | 24 | static void at93c_reg_write(u32 val) | 
 | 25 | { | 
 | 26 | 	*at93c->reg = val; | 
 | 27 | } | 
 | 28 |  | 
 | 29 | static u32 at93c_reg_read(void) | 
 | 30 | { | 
 | 31 | 	u32 tmp = *at93c->reg; | 
 | 32 | 	return tmp; | 
 | 33 | } | 
 | 34 |  | 
 | 35 | static u32 at93c_datareg_read(void) | 
 | 36 | { | 
 | 37 | 	u32 tmp = *at93c->rdata_reg; | 
 | 38 | 	return tmp; | 
 | 39 | } | 
 | 40 |  | 
 | 41 | static void at93c_cycle_clk(u32 data) | 
 | 42 | { | 
 | 43 | 	at93c_reg_write(data | at93c->clk); | 
 | 44 | 	lasat_ndelay(250); | 
 | 45 | 	at93c_reg_write(data & ~at93c->clk); | 
 | 46 | 	lasat_ndelay(250); | 
 | 47 | } | 
 | 48 |  | 
 | 49 | static void at93c_write_databit(u8 bit) | 
 | 50 | { | 
 | 51 | 	u32 data = at93c_reg_read(); | 
 | 52 | 	if (bit) | 
 | 53 | 		data |= 1 << at93c->wdata_shift; | 
 | 54 | 	else | 
 | 55 | 		data &= ~(1 << at93c->wdata_shift); | 
 | 56 |  | 
 | 57 | 	at93c_reg_write(data); | 
 | 58 | 	lasat_ndelay(100); | 
 | 59 | 	at93c_cycle_clk(data); | 
 | 60 | } | 
 | 61 |  | 
 | 62 | static unsigned int at93c_read_databit(void) | 
 | 63 | { | 
 | 64 | 	u32 data; | 
 | 65 |  | 
 | 66 | 	at93c_cycle_clk(at93c_reg_read()); | 
 | 67 | 	data = (at93c_datareg_read() >> at93c->rdata_shift) & 1; | 
 | 68 | 	return data; | 
 | 69 | } | 
 | 70 |  | 
 | 71 | static u8 at93c_read_byte(void) | 
 | 72 | { | 
 | 73 | 	int i; | 
 | 74 | 	u8 data = 0; | 
 | 75 |  | 
 | 76 | 	for (i = 0; i <= 7; i++) { | 
 | 77 | 		data <<= 1; | 
 | 78 | 		data |= at93c_read_databit(); | 
 | 79 | 	} | 
 | 80 | 	return data; | 
 | 81 | } | 
 | 82 |  | 
 | 83 | static void at93c_write_bits(u32 data, int size) | 
 | 84 | { | 
 | 85 | 	int i; | 
 | 86 | 	int shift = size - 1; | 
 | 87 | 	u32 mask = (1 << shift); | 
 | 88 |  | 
 | 89 | 	for (i = 0; i < size; i++) { | 
 | 90 | 		at93c_write_databit((data & mask) >> shift); | 
 | 91 | 		data <<= 1; | 
 | 92 | 	} | 
 | 93 | } | 
 | 94 |  | 
 | 95 | static void at93c_init_op(void) | 
 | 96 | { | 
 | 97 | 	at93c_reg_write((at93c_reg_read() | at93c->cs) & | 
 | 98 | 			~at93c->clk & ~(1 << at93c->rdata_shift)); | 
 | 99 | 	lasat_ndelay(50); | 
 | 100 | } | 
 | 101 |  | 
 | 102 | static void at93c_end_op(void) | 
 | 103 | { | 
 | 104 | 	at93c_reg_write(at93c_reg_read() & ~at93c->cs); | 
 | 105 | 	lasat_ndelay(250); | 
 | 106 | } | 
 | 107 |  | 
 | 108 | static void at93c_wait(void) | 
 | 109 | { | 
 | 110 | 	at93c_init_op(); | 
 | 111 | 	while (!at93c_read_databit()) | 
 | 112 | 		; | 
 | 113 | 	at93c_end_op(); | 
 | 114 | }; | 
 | 115 |  | 
 | 116 | static void at93c_disable_wp(void) | 
 | 117 | { | 
 | 118 | 	at93c_init_op(); | 
 | 119 | 	at93c_write_bits(AT93C_WENCMD, 10); | 
 | 120 | 	at93c_end_op(); | 
 | 121 | } | 
 | 122 |  | 
 | 123 | static void at93c_enable_wp(void) | 
 | 124 | { | 
 | 125 | 	at93c_init_op(); | 
 | 126 | 	at93c_write_bits(AT93C_WDSCMD, 10); | 
 | 127 | 	at93c_end_op(); | 
 | 128 | } | 
 | 129 |  | 
 | 130 | u8 at93c_read(u8 addr) | 
 | 131 | { | 
 | 132 | 	u8 byte; | 
 | 133 | 	at93c_init_op(); | 
 | 134 | 	at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_RCMD, 10); | 
 | 135 | 	byte = at93c_read_byte(); | 
 | 136 | 	at93c_end_op(); | 
 | 137 | 	return byte; | 
 | 138 | } | 
 | 139 |  | 
 | 140 | void at93c_write(u8 addr, u8 data) | 
 | 141 | { | 
 | 142 | 	at93c_disable_wp(); | 
 | 143 | 	at93c_init_op(); | 
 | 144 | 	at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_WCMD, 10); | 
 | 145 | 	at93c_write_bits(data, 8); | 
 | 146 | 	at93c_end_op(); | 
 | 147 | 	at93c_wait(); | 
 | 148 | 	at93c_enable_wp(); | 
 | 149 | } |