| Daniel Laird | 33c050c | 2008-11-05 16:46:49 +0100 | [diff] [blame] | 1 | /* | 
|  | 2 | *  PNX833x Hardware Watchdog Driver | 
|  | 3 | *  Copyright 2008 NXP Semiconductors | 
|  | 4 | *  Daniel Laird <daniel.j.laird@nxp.com> | 
|  | 5 | *  Andre McCurdy <andre.mccurdy@nxp.com> | 
|  | 6 | * | 
|  | 7 | *  Heavily based upon - IndyDog	0.3 | 
|  | 8 | *  A Hardware Watchdog Device for SGI IP22 | 
|  | 9 | * | 
|  | 10 | * (c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>, All Rights Reserved. | 
|  | 11 | * | 
|  | 12 | * This program is free software; you can redistribute it and/or | 
|  | 13 | * modify it under the terms of the GNU General Public License | 
|  | 14 | * as published by the Free Software Foundation; either version | 
|  | 15 | * 2 of the License, or (at your option) any later version. | 
|  | 16 | * | 
|  | 17 | * based on softdog.c by Alan Cox <alan@redhat.com> | 
|  | 18 | */ | 
|  | 19 |  | 
|  | 20 | #include <linux/module.h> | 
|  | 21 | #include <linux/moduleparam.h> | 
|  | 22 | #include <linux/types.h> | 
|  | 23 | #include <linux/kernel.h> | 
|  | 24 | #include <linux/fs.h> | 
|  | 25 | #include <linux/mm.h> | 
|  | 26 | #include <linux/miscdevice.h> | 
|  | 27 | #include <linux/watchdog.h> | 
|  | 28 | #include <linux/notifier.h> | 
|  | 29 | #include <linux/reboot.h> | 
|  | 30 | #include <linux/init.h> | 
|  | 31 | #include <asm/mach-pnx833x/pnx833x.h> | 
|  | 32 |  | 
|  | 33 | #define PFX "pnx833x: " | 
|  | 34 | #define WATCHDOG_TIMEOUT 30		/* 30 sec Maximum timeout */ | 
|  | 35 | #define WATCHDOG_COUNT_FREQUENCY 68000000U /* Watchdog counts at 68MHZ. */ | 
| Randy Dunlap | 76550d3 | 2010-05-01 09:46:15 -0700 | [diff] [blame] | 36 | #define	PNX_WATCHDOG_TIMEOUT	(WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY) | 
|  | 37 | #define PNX_TIMEOUT_VALUE	2040000000U | 
| Daniel Laird | 33c050c | 2008-11-05 16:46:49 +0100 | [diff] [blame] | 38 |  | 
|  | 39 | /** CONFIG block */ | 
|  | 40 | #define PNX833X_CONFIG                      (0x07000U) | 
|  | 41 | #define PNX833X_CONFIG_CPU_WATCHDOG         (0x54) | 
|  | 42 | #define PNX833X_CONFIG_CPU_WATCHDOG_COMPARE (0x58) | 
|  | 43 | #define PNX833X_CONFIG_CPU_COUNTERS_CONTROL (0x1c) | 
|  | 44 |  | 
|  | 45 | /** RESET block */ | 
|  | 46 | #define PNX833X_RESET                       (0x08000U) | 
|  | 47 | #define PNX833X_RESET_CONFIG                (0x08) | 
|  | 48 |  | 
|  | 49 | static int pnx833x_wdt_alive; | 
|  | 50 |  | 
|  | 51 | /* Set default timeout in MHZ.*/ | 
| Randy Dunlap | 76550d3 | 2010-05-01 09:46:15 -0700 | [diff] [blame] | 52 | static int pnx833x_wdt_timeout = PNX_WATCHDOG_TIMEOUT; | 
| Daniel Laird | 33c050c | 2008-11-05 16:46:49 +0100 | [diff] [blame] | 53 | module_param(pnx833x_wdt_timeout, int, 0); | 
|  | 54 | MODULE_PARM_DESC(timeout, "Watchdog timeout in Mhz. (68Mhz clock), default=" | 
| Randy Dunlap | 76550d3 | 2010-05-01 09:46:15 -0700 | [diff] [blame] | 55 | __MODULE_STRING(PNX_TIMEOUT_VALUE) "(30 seconds)."); | 
| Daniel Laird | 33c050c | 2008-11-05 16:46:49 +0100 | [diff] [blame] | 56 |  | 
|  | 57 | static int nowayout = WATCHDOG_NOWAYOUT; | 
|  | 58 | module_param(nowayout, int, 0); | 
|  | 59 | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" | 
|  | 60 | __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); | 
|  | 61 |  | 
| Randy Dunlap | 76550d3 | 2010-05-01 09:46:15 -0700 | [diff] [blame] | 62 | #define START_DEFAULT	1 | 
|  | 63 | static int start_enabled = START_DEFAULT; | 
| Daniel Laird | 33c050c | 2008-11-05 16:46:49 +0100 | [diff] [blame] | 64 | module_param(start_enabled, int, 0); | 
|  | 65 | MODULE_PARM_DESC(start_enabled, "Watchdog is started on module insertion " | 
| Randy Dunlap | 76550d3 | 2010-05-01 09:46:15 -0700 | [diff] [blame] | 66 | "(default=" __MODULE_STRING(START_DEFAULT) ")"); | 
| Daniel Laird | 33c050c | 2008-11-05 16:46:49 +0100 | [diff] [blame] | 67 |  | 
|  | 68 | static void pnx833x_wdt_start(void) | 
|  | 69 | { | 
|  | 70 | /* Enable watchdog causing reset. */ | 
|  | 71 | PNX833X_REG(PNX833X_RESET + PNX833X_RESET_CONFIG) |= 0x1; | 
|  | 72 | /* Set timeout.*/ | 
|  | 73 | PNX833X_REG(PNX833X_CONFIG + | 
|  | 74 | PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout; | 
|  | 75 | /* Enable watchdog. */ | 
|  | 76 | PNX833X_REG(PNX833X_CONFIG + | 
|  | 77 | PNX833X_CONFIG_CPU_COUNTERS_CONTROL) |= 0x1; | 
|  | 78 |  | 
|  | 79 | printk(KERN_INFO PFX "Started watchdog timer.\n"); | 
|  | 80 | } | 
|  | 81 |  | 
|  | 82 | static void pnx833x_wdt_stop(void) | 
|  | 83 | { | 
|  | 84 | /* Disable watchdog causing reset. */ | 
|  | 85 | PNX833X_REG(PNX833X_RESET + PNX833X_CONFIG) &= 0xFFFFFFFE; | 
|  | 86 | /* Disable watchdog.*/ | 
|  | 87 | PNX833X_REG(PNX833X_CONFIG + | 
|  | 88 | PNX833X_CONFIG_CPU_COUNTERS_CONTROL) &= 0xFFFFFFFE; | 
|  | 89 |  | 
|  | 90 | printk(KERN_INFO PFX "Stopped watchdog timer.\n"); | 
|  | 91 | } | 
|  | 92 |  | 
|  | 93 | static void pnx833x_wdt_ping(void) | 
|  | 94 | { | 
|  | 95 | PNX833X_REG(PNX833X_CONFIG + | 
|  | 96 | PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout; | 
|  | 97 | } | 
|  | 98 |  | 
|  | 99 | /* | 
|  | 100 | *	Allow only one person to hold it open | 
|  | 101 | */ | 
|  | 102 | static int pnx833x_wdt_open(struct inode *inode, struct file *file) | 
|  | 103 | { | 
|  | 104 | if (test_and_set_bit(0, &pnx833x_wdt_alive)) | 
|  | 105 | return -EBUSY; | 
|  | 106 |  | 
|  | 107 | if (nowayout) | 
|  | 108 | __module_get(THIS_MODULE); | 
|  | 109 |  | 
|  | 110 | /* Activate timer */ | 
|  | 111 | if (!start_enabled) | 
|  | 112 | pnx833x_wdt_start(); | 
|  | 113 |  | 
|  | 114 | pnx833x_wdt_ping(); | 
|  | 115 |  | 
|  | 116 | printk(KERN_INFO "Started watchdog timer.\n"); | 
|  | 117 |  | 
|  | 118 | return nonseekable_open(inode, file); | 
|  | 119 | } | 
|  | 120 |  | 
|  | 121 | static int pnx833x_wdt_release(struct inode *inode, struct file *file) | 
|  | 122 | { | 
|  | 123 | /* Shut off the timer. | 
|  | 124 | * Lock it in if it's a module and we defined ...NOWAYOUT */ | 
|  | 125 | if (!nowayout) | 
|  | 126 | pnx833x_wdt_stop(); /* Turn the WDT off */ | 
|  | 127 |  | 
|  | 128 | clear_bit(0, &pnx833x_wdt_alive); | 
|  | 129 | return 0; | 
|  | 130 | } | 
|  | 131 |  | 
|  | 132 | static ssize_t pnx833x_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) | 
|  | 133 | { | 
|  | 134 | /* Refresh the timer. */ | 
|  | 135 | if (len) | 
|  | 136 | pnx833x_wdt_ping(); | 
|  | 137 |  | 
|  | 138 | return len; | 
|  | 139 | } | 
|  | 140 |  | 
|  | 141 | static long pnx833x_wdt_ioctl(struct file *file, unsigned int cmd, | 
|  | 142 | unsigned long arg) | 
|  | 143 | { | 
|  | 144 | int options, new_timeout = 0; | 
|  | 145 | uint32_t timeout, timeout_left = 0; | 
|  | 146 |  | 
| Wim Van Sebroeck | 42747d7 | 2009-12-26 18:55:22 +0000 | [diff] [blame] | 147 | static const struct watchdog_info ident = { | 
| Daniel Laird | 33c050c | 2008-11-05 16:46:49 +0100 | [diff] [blame] | 148 | .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT, | 
|  | 149 | .firmware_version = 0, | 
|  | 150 | .identity = "Hardware Watchdog for PNX833x", | 
|  | 151 | }; | 
|  | 152 |  | 
|  | 153 | switch (cmd) { | 
|  | 154 | default: | 
|  | 155 | return -ENOTTY; | 
|  | 156 |  | 
|  | 157 | case WDIOC_GETSUPPORT: | 
|  | 158 | if (copy_to_user((struct watchdog_info *)arg, | 
|  | 159 | &ident, sizeof(ident))) | 
|  | 160 | return -EFAULT; | 
|  | 161 | return 0; | 
|  | 162 |  | 
|  | 163 | case WDIOC_GETSTATUS: | 
|  | 164 | case WDIOC_GETBOOTSTATUS: | 
|  | 165 | return put_user(0, (int *)arg); | 
|  | 166 |  | 
|  | 167 | case WDIOC_SETOPTIONS: | 
|  | 168 | if (get_user(options, (int *)arg)) | 
|  | 169 | return -EFAULT; | 
|  | 170 |  | 
|  | 171 | if (options & WDIOS_DISABLECARD) | 
|  | 172 | pnx833x_wdt_stop(); | 
|  | 173 |  | 
|  | 174 | if (options & WDIOS_ENABLECARD) | 
|  | 175 | pnx833x_wdt_start(); | 
|  | 176 |  | 
|  | 177 | return 0; | 
|  | 178 |  | 
|  | 179 | case WDIOC_KEEPALIVE: | 
|  | 180 | pnx833x_wdt_ping(); | 
|  | 181 | return 0; | 
|  | 182 |  | 
|  | 183 | case WDIOC_SETTIMEOUT: | 
|  | 184 | { | 
|  | 185 | if (get_user(new_timeout, (int *)arg)) | 
|  | 186 | return -EFAULT; | 
|  | 187 |  | 
|  | 188 | pnx833x_wdt_timeout = new_timeout; | 
|  | 189 | PNX833X_REG(PNX833X_CONFIG + | 
|  | 190 | PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = new_timeout; | 
|  | 191 | return put_user(new_timeout, (int *)arg); | 
|  | 192 | } | 
|  | 193 |  | 
|  | 194 | case WDIOC_GETTIMEOUT: | 
|  | 195 | timeout = PNX833X_REG(PNX833X_CONFIG + | 
|  | 196 | PNX833X_CONFIG_CPU_WATCHDOG_COMPARE); | 
|  | 197 | return put_user(timeout, (int *)arg); | 
|  | 198 |  | 
|  | 199 | case WDIOC_GETTIMELEFT: | 
|  | 200 | timeout_left = PNX833X_REG(PNX833X_CONFIG + | 
|  | 201 | PNX833X_CONFIG_CPU_WATCHDOG); | 
|  | 202 | return put_user(timeout_left, (int *)arg); | 
|  | 203 |  | 
|  | 204 | } | 
|  | 205 | } | 
|  | 206 |  | 
|  | 207 | static int pnx833x_wdt_notify_sys(struct notifier_block *this, | 
|  | 208 | unsigned long code, void *unused) | 
|  | 209 | { | 
|  | 210 | if (code == SYS_DOWN || code == SYS_HALT) | 
|  | 211 | pnx833x_wdt_stop(); /* Turn the WDT off */ | 
|  | 212 |  | 
|  | 213 | return NOTIFY_DONE; | 
|  | 214 | } | 
|  | 215 |  | 
|  | 216 | static const struct file_operations pnx833x_wdt_fops = { | 
|  | 217 | .owner		= THIS_MODULE, | 
|  | 218 | .llseek		= no_llseek, | 
|  | 219 | .write		= pnx833x_wdt_write, | 
|  | 220 | .unlocked_ioctl	= pnx833x_wdt_ioctl, | 
|  | 221 | .open		= pnx833x_wdt_open, | 
|  | 222 | .release	= pnx833x_wdt_release, | 
|  | 223 | }; | 
|  | 224 |  | 
|  | 225 | static struct miscdevice pnx833x_wdt_miscdev = { | 
|  | 226 | .minor		= WATCHDOG_MINOR, | 
|  | 227 | .name		= "watchdog", | 
|  | 228 | .fops		= &pnx833x_wdt_fops, | 
|  | 229 | }; | 
|  | 230 |  | 
|  | 231 | static struct notifier_block pnx833x_wdt_notifier = { | 
|  | 232 | .notifier_call = pnx833x_wdt_notify_sys, | 
|  | 233 | }; | 
|  | 234 |  | 
|  | 235 | static char banner[] __initdata = | 
|  | 236 | KERN_INFO PFX "Hardware Watchdog Timer for PNX833x: Version 0.1\n"; | 
|  | 237 |  | 
|  | 238 | static int __init watchdog_init(void) | 
|  | 239 | { | 
|  | 240 | int ret, cause; | 
|  | 241 |  | 
|  | 242 | /* Lets check the reason for the reset.*/ | 
|  | 243 | cause = PNX833X_REG(PNX833X_RESET); | 
|  | 244 | /*If bit 31 is set then watchdog was cause of reset.*/ | 
|  | 245 | if (cause & 0x80000000) { | 
|  | 246 | printk(KERN_INFO PFX "The system was previously reset due to " | 
|  | 247 | "the watchdog firing - please investigate...\n"); | 
|  | 248 | } | 
|  | 249 |  | 
|  | 250 | ret = register_reboot_notifier(&pnx833x_wdt_notifier); | 
|  | 251 | if (ret) { | 
|  | 252 | printk(KERN_ERR PFX | 
|  | 253 | "cannot register reboot notifier (err=%d)\n", ret); | 
|  | 254 | return ret; | 
|  | 255 | } | 
|  | 256 |  | 
|  | 257 | ret = misc_register(&pnx833x_wdt_miscdev); | 
|  | 258 | if (ret) { | 
|  | 259 | printk(KERN_ERR PFX | 
|  | 260 | "cannot register miscdev on minor=%d (err=%d)\n", | 
|  | 261 | WATCHDOG_MINOR, ret); | 
|  | 262 | unregister_reboot_notifier(&pnx833x_wdt_notifier); | 
|  | 263 | return ret; | 
|  | 264 | } | 
|  | 265 |  | 
|  | 266 | printk(banner); | 
|  | 267 | if (start_enabled) | 
|  | 268 | pnx833x_wdt_start(); | 
|  | 269 |  | 
|  | 270 | return 0; | 
|  | 271 | } | 
|  | 272 |  | 
|  | 273 | static void __exit watchdog_exit(void) | 
|  | 274 | { | 
|  | 275 | misc_deregister(&pnx833x_wdt_miscdev); | 
|  | 276 | unregister_reboot_notifier(&pnx833x_wdt_notifier); | 
|  | 277 | } | 
|  | 278 |  | 
|  | 279 | module_init(watchdog_init); | 
|  | 280 | module_exit(watchdog_exit); | 
|  | 281 |  | 
|  | 282 | MODULE_AUTHOR("Daniel Laird/Andre McCurdy"); | 
|  | 283 | MODULE_DESCRIPTION("Hardware Watchdog Device for PNX833x"); | 
|  | 284 | MODULE_LICENSE("GPL"); | 
|  | 285 | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |