| Bengt Jonsson | 38e9683 | 2012-01-13 16:30:31 +0100 | [diff] [blame] | 1 | /* | 
|  | 2 | * Copyright (C) ST-Ericsson SA 2010 | 
|  | 3 | * | 
|  | 4 | * License Terms: GNU General Public License v2 | 
|  | 5 | * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson | 
|  | 6 | *          Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson | 
|  | 7 | * | 
|  | 8 | * UX500 common part of Power domain regulators | 
|  | 9 | */ | 
|  | 10 |  | 
|  | 11 | #include <linux/kernel.h> | 
|  | 12 | #include <linux/err.h> | 
|  | 13 | #include <linux/regulator/driver.h> | 
|  | 14 | #include <linux/debugfs.h> | 
|  | 15 | #include <linux/seq_file.h> | 
|  | 16 | #include <linux/slab.h> | 
|  | 17 |  | 
|  | 18 | #include "dbx500-prcmu.h" | 
|  | 19 |  | 
|  | 20 | /* | 
|  | 21 | * power state reference count | 
|  | 22 | */ | 
|  | 23 | static int power_state_active_cnt; /* will initialize to zero */ | 
|  | 24 | static DEFINE_SPINLOCK(power_state_active_lock); | 
|  | 25 |  | 
|  | 26 | int power_state_active_get(void) | 
|  | 27 | { | 
|  | 28 | unsigned long flags; | 
|  | 29 | int cnt; | 
|  | 30 |  | 
|  | 31 | spin_lock_irqsave(&power_state_active_lock, flags); | 
|  | 32 | cnt = power_state_active_cnt; | 
|  | 33 | spin_unlock_irqrestore(&power_state_active_lock, flags); | 
|  | 34 |  | 
|  | 35 | return cnt; | 
|  | 36 | } | 
|  | 37 |  | 
|  | 38 | void power_state_active_enable(void) | 
|  | 39 | { | 
|  | 40 | unsigned long flags; | 
|  | 41 |  | 
|  | 42 | spin_lock_irqsave(&power_state_active_lock, flags); | 
|  | 43 | power_state_active_cnt++; | 
|  | 44 | spin_unlock_irqrestore(&power_state_active_lock, flags); | 
|  | 45 | } | 
|  | 46 |  | 
|  | 47 | int power_state_active_disable(void) | 
|  | 48 | { | 
|  | 49 | int ret = 0; | 
|  | 50 | unsigned long flags; | 
|  | 51 |  | 
|  | 52 | spin_lock_irqsave(&power_state_active_lock, flags); | 
|  | 53 | if (power_state_active_cnt <= 0) { | 
|  | 54 | pr_err("power state: unbalanced enable/disable calls\n"); | 
|  | 55 | ret = -EINVAL; | 
|  | 56 | goto out; | 
|  | 57 | } | 
|  | 58 |  | 
|  | 59 | power_state_active_cnt--; | 
|  | 60 | out: | 
|  | 61 | spin_unlock_irqrestore(&power_state_active_lock, flags); | 
|  | 62 | return ret; | 
|  | 63 | } | 
|  | 64 |  | 
|  | 65 | #ifdef CONFIG_REGULATOR_DEBUG | 
|  | 66 |  | 
|  | 67 | static struct ux500_regulator_debug { | 
|  | 68 | struct dentry *dir; | 
|  | 69 | struct dentry *status_file; | 
|  | 70 | struct dentry *power_state_cnt_file; | 
|  | 71 | struct dbx500_regulator_info *regulator_array; | 
|  | 72 | int num_regulators; | 
|  | 73 | u8 *state_before_suspend; | 
|  | 74 | u8 *state_after_suspend; | 
|  | 75 | } rdebug; | 
|  | 76 |  | 
|  | 77 | void ux500_regulator_suspend_debug(void) | 
|  | 78 | { | 
|  | 79 | int i; | 
|  | 80 | for (i = 0; i < rdebug.num_regulators; i++) | 
|  | 81 | rdebug.state_before_suspend[i] = | 
|  | 82 | rdebug.regulator_array[i].is_enabled; | 
|  | 83 | } | 
|  | 84 |  | 
|  | 85 | void ux500_regulator_resume_debug(void) | 
|  | 86 | { | 
|  | 87 | int i; | 
|  | 88 | for (i = 0; i < rdebug.num_regulators; i++) | 
|  | 89 | rdebug.state_after_suspend[i] = | 
|  | 90 | rdebug.regulator_array[i].is_enabled; | 
|  | 91 | } | 
|  | 92 |  | 
|  | 93 | static int ux500_regulator_power_state_cnt_print(struct seq_file *s, void *p) | 
|  | 94 | { | 
|  | 95 | struct device *dev = s->private; | 
|  | 96 | int err; | 
|  | 97 |  | 
|  | 98 | /* print power state count */ | 
|  | 99 | err = seq_printf(s, "ux500-regulator power state count: %i\n", | 
|  | 100 | power_state_active_get()); | 
|  | 101 | if (err < 0) | 
|  | 102 | dev_err(dev, "seq_printf overflow\n"); | 
|  | 103 |  | 
|  | 104 | return 0; | 
|  | 105 | } | 
|  | 106 |  | 
|  | 107 | static int ux500_regulator_power_state_cnt_open(struct inode *inode, | 
|  | 108 | struct file *file) | 
|  | 109 | { | 
|  | 110 | return single_open(file, ux500_regulator_power_state_cnt_print, | 
|  | 111 | inode->i_private); | 
|  | 112 | } | 
|  | 113 |  | 
|  | 114 | static const struct file_operations ux500_regulator_power_state_cnt_fops = { | 
|  | 115 | .open = ux500_regulator_power_state_cnt_open, | 
|  | 116 | .read = seq_read, | 
|  | 117 | .llseek = seq_lseek, | 
|  | 118 | .release = single_release, | 
|  | 119 | .owner = THIS_MODULE, | 
|  | 120 | }; | 
|  | 121 |  | 
|  | 122 | static int ux500_regulator_status_print(struct seq_file *s, void *p) | 
|  | 123 | { | 
|  | 124 | struct device *dev = s->private; | 
|  | 125 | int err; | 
|  | 126 | int i; | 
|  | 127 |  | 
|  | 128 | /* print dump header */ | 
|  | 129 | err = seq_printf(s, "ux500-regulator status:\n"); | 
|  | 130 | if (err < 0) | 
|  | 131 | dev_err(dev, "seq_printf overflow\n"); | 
|  | 132 |  | 
|  | 133 | err = seq_printf(s, "%31s : %8s : %8s\n", "current", | 
|  | 134 | "before", "after"); | 
|  | 135 | if (err < 0) | 
|  | 136 | dev_err(dev, "seq_printf overflow\n"); | 
|  | 137 |  | 
|  | 138 | for (i = 0; i < rdebug.num_regulators; i++) { | 
|  | 139 | struct dbx500_regulator_info *info; | 
|  | 140 | /* Access per-regulator data */ | 
|  | 141 | info = &rdebug.regulator_array[i]; | 
|  | 142 |  | 
|  | 143 | /* print status */ | 
|  | 144 | err = seq_printf(s, "%20s : %8s : %8s : %8s\n", info->desc.name, | 
|  | 145 | info->is_enabled ? "enabled" : "disabled", | 
|  | 146 | rdebug.state_before_suspend[i] ? "enabled" : "disabled", | 
|  | 147 | rdebug.state_after_suspend[i] ? "enabled" : "disabled"); | 
|  | 148 | if (err < 0) | 
|  | 149 | dev_err(dev, "seq_printf overflow\n"); | 
|  | 150 | } | 
|  | 151 |  | 
|  | 152 | return 0; | 
|  | 153 | } | 
|  | 154 |  | 
|  | 155 | static int ux500_regulator_status_open(struct inode *inode, struct file *file) | 
|  | 156 | { | 
|  | 157 | return single_open(file, ux500_regulator_status_print, | 
|  | 158 | inode->i_private); | 
|  | 159 | } | 
|  | 160 |  | 
|  | 161 | static const struct file_operations ux500_regulator_status_fops = { | 
|  | 162 | .open = ux500_regulator_status_open, | 
|  | 163 | .read = seq_read, | 
|  | 164 | .llseek = seq_lseek, | 
|  | 165 | .release = single_release, | 
|  | 166 | .owner = THIS_MODULE, | 
|  | 167 | }; | 
|  | 168 |  | 
|  | 169 | int __attribute__((weak)) dbx500_regulator_testcase( | 
|  | 170 | struct dbx500_regulator_info *regulator_info, | 
|  | 171 | int num_regulators) | 
|  | 172 | { | 
|  | 173 | return 0; | 
|  | 174 | } | 
|  | 175 |  | 
|  | 176 | int __devinit | 
|  | 177 | ux500_regulator_debug_init(struct platform_device *pdev, | 
|  | 178 | struct dbx500_regulator_info *regulator_info, | 
|  | 179 | int num_regulators) | 
|  | 180 | { | 
|  | 181 | /* create directory */ | 
|  | 182 | rdebug.dir = debugfs_create_dir("ux500-regulator", NULL); | 
|  | 183 | if (!rdebug.dir) | 
|  | 184 | goto exit_no_debugfs; | 
|  | 185 |  | 
|  | 186 | /* create "status" file */ | 
|  | 187 | rdebug.status_file = debugfs_create_file("status", | 
|  | 188 | S_IRUGO, rdebug.dir, &pdev->dev, | 
|  | 189 | &ux500_regulator_status_fops); | 
|  | 190 | if (!rdebug.status_file) | 
|  | 191 | goto exit_destroy_dir; | 
|  | 192 |  | 
|  | 193 | /* create "power-state-count" file */ | 
|  | 194 | rdebug.power_state_cnt_file = debugfs_create_file("power-state-count", | 
|  | 195 | S_IRUGO, rdebug.dir, &pdev->dev, | 
|  | 196 | &ux500_regulator_power_state_cnt_fops); | 
|  | 197 | if (!rdebug.power_state_cnt_file) | 
|  | 198 | goto exit_destroy_status; | 
|  | 199 |  | 
|  | 200 | rdebug.regulator_array = regulator_info; | 
|  | 201 | rdebug.num_regulators = num_regulators; | 
|  | 202 |  | 
|  | 203 | rdebug.state_before_suspend = kzalloc(num_regulators, GFP_KERNEL); | 
|  | 204 | if (!rdebug.state_before_suspend) { | 
|  | 205 | dev_err(&pdev->dev, | 
|  | 206 | "could not allocate memory for saving state\n"); | 
|  | 207 | goto exit_destroy_power_state; | 
|  | 208 | } | 
|  | 209 |  | 
|  | 210 | rdebug.state_after_suspend = kzalloc(num_regulators, GFP_KERNEL); | 
|  | 211 | if (!rdebug.state_after_suspend) { | 
|  | 212 | dev_err(&pdev->dev, | 
|  | 213 | "could not allocate memory for saving state\n"); | 
|  | 214 | goto exit_free; | 
|  | 215 | } | 
|  | 216 |  | 
|  | 217 | dbx500_regulator_testcase(regulator_info, num_regulators); | 
|  | 218 | return 0; | 
|  | 219 |  | 
|  | 220 | exit_free: | 
|  | 221 | kfree(rdebug.state_before_suspend); | 
|  | 222 | exit_destroy_power_state: | 
|  | 223 | debugfs_remove(rdebug.power_state_cnt_file); | 
|  | 224 | exit_destroy_status: | 
|  | 225 | debugfs_remove(rdebug.status_file); | 
|  | 226 | exit_destroy_dir: | 
|  | 227 | debugfs_remove(rdebug.dir); | 
|  | 228 | exit_no_debugfs: | 
|  | 229 | dev_err(&pdev->dev, "failed to create debugfs entries.\n"); | 
|  | 230 | return -ENOMEM; | 
|  | 231 | } | 
|  | 232 |  | 
|  | 233 | int __devexit ux500_regulator_debug_exit(void) | 
|  | 234 | { | 
|  | 235 | debugfs_remove_recursive(rdebug.dir); | 
|  | 236 | kfree(rdebug.state_after_suspend); | 
|  | 237 | kfree(rdebug.state_before_suspend); | 
|  | 238 |  | 
|  | 239 | return 0; | 
|  | 240 | } | 
|  | 241 | #endif |