blob: e96cbbd9b449874e09dc38288abead50c8db1673 [file] [log] [blame]
Becky Bruceec3cf2e2009-05-14 12:42:28 +00001/*
2 * Contains routines needed to support swiotlb for ppc.
3 *
4 * Copyright (C) 2009 Becky Bruce, Freescale Semiconductor
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 *
11 */
12
13#include <linux/dma-mapping.h>
14#include <linux/pfn.h>
15#include <linux/of_platform.h>
16#include <linux/platform_device.h>
17#include <linux/pci.h>
18
19#include <asm/machdep.h>
20#include <asm/swiotlb.h>
21#include <asm/dma.h>
22#include <asm/abs_addr.h>
23
24int swiotlb __read_mostly;
25unsigned int ppc_swiotlb_enable;
26
Becky Bruceec3cf2e2009-05-14 12:42:28 +000027/*
Becky Bruceec3cf2e2009-05-14 12:42:28 +000028 * At the moment, all platforms that use this code only require
29 * swiotlb to be used if we're operating on HIGHMEM. Since
30 * we don't ever call anything other than map_sg, unmap_sg,
31 * map_page, and unmap_page on highmem, use normal dma_ops
32 * for everything else.
33 */
FUJITA Tomonori45223c52009-08-04 19:08:25 +000034struct dma_map_ops swiotlb_dma_ops = {
Becky Bruceec3cf2e2009-05-14 12:42:28 +000035 .alloc_coherent = dma_direct_alloc_coherent,
36 .free_coherent = dma_direct_free_coherent,
37 .map_sg = swiotlb_map_sg_attrs,
38 .unmap_sg = swiotlb_unmap_sg_attrs,
39 .dma_supported = swiotlb_dma_supported,
40 .map_page = swiotlb_map_page,
41 .unmap_page = swiotlb_unmap_page,
Becky Bruceec3cf2e2009-05-14 12:42:28 +000042 .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
43 .sync_single_range_for_device = swiotlb_sync_single_range_for_device,
44 .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
FUJITA Tomonori4a9a6bf2009-08-04 19:08:27 +000045 .sync_sg_for_device = swiotlb_sync_sg_for_device,
46 .mapping_error = swiotlb_dma_mapping_error,
Becky Bruceec3cf2e2009-05-14 12:42:28 +000047};
48
FUJITA Tomonori762afb72009-08-04 19:08:22 +000049void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
50{
51 struct pci_controller *hose;
52 struct dev_archdata *sd;
53
54 hose = pci_bus_to_host(pdev->bus);
55 sd = &pdev->dev.archdata;
56 sd->max_direct_dma_addr =
57 hose->dma_window_base_cur + hose->dma_window_size;
58}
59
Becky Bruceec3cf2e2009-05-14 12:42:28 +000060static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
61 unsigned long action, void *data)
62{
63 struct device *dev = data;
FUJITA Tomonori762afb72009-08-04 19:08:22 +000064 struct dev_archdata *sd;
Becky Bruceec3cf2e2009-05-14 12:42:28 +000065
66 /* We are only intereted in device addition */
67 if (action != BUS_NOTIFY_ADD_DEVICE)
68 return 0;
69
FUJITA Tomonori762afb72009-08-04 19:08:22 +000070 sd = &dev->archdata;
71 sd->max_direct_dma_addr = 0;
72
Becky Bruceec3cf2e2009-05-14 12:42:28 +000073 /* May need to bounce if the device can't address all of DRAM */
74 if (dma_get_mask(dev) < lmb_end_of_DRAM())
75 set_dma_ops(dev, &swiotlb_dma_ops);
76
77 return NOTIFY_DONE;
78}
79
80static struct notifier_block ppc_swiotlb_plat_bus_notifier = {
81 .notifier_call = ppc_swiotlb_bus_notify,
82 .priority = 0,
83};
84
85static struct notifier_block ppc_swiotlb_of_bus_notifier = {
86 .notifier_call = ppc_swiotlb_bus_notify,
87 .priority = 0,
88};
89
90int __init swiotlb_setup_bus_notifier(void)
91{
92 bus_register_notifier(&platform_bus_type,
93 &ppc_swiotlb_plat_bus_notifier);
94 bus_register_notifier(&of_platform_bus_type,
95 &ppc_swiotlb_of_bus_notifier);
96
97 return 0;
98}