| Hans-Christian Egtvedt | e4967d6 | 2009-02-05 13:10:59 +0100 | [diff] [blame] | 1 | /* | 
 | 2 |  * Driver for the Atmel on-chip Audio Bitstream DAC (ABDAC) | 
 | 3 |  * | 
 | 4 |  * Copyright (C) 2006-2009 Atmel Corporation | 
 | 5 |  * | 
 | 6 |  * This program is free software; you can redistribute it and/or modify it | 
 | 7 |  * under the terms of the GNU General Public License version 2 as published by | 
 | 8 |  * the Free Software Foundation. | 
 | 9 |  */ | 
 | 10 | #include <linux/clk.h> | 
 | 11 | #include <linux/bitmap.h> | 
 | 12 | #include <linux/dw_dmac.h> | 
 | 13 | #include <linux/dmaengine.h> | 
 | 14 | #include <linux/dma-mapping.h> | 
 | 15 | #include <linux/init.h> | 
 | 16 | #include <linux/interrupt.h> | 
 | 17 | #include <linux/module.h> | 
 | 18 | #include <linux/platform_device.h> | 
| Viresh Kumar | e2b35f3 | 2012-02-01 16:12:27 +0530 | [diff] [blame] | 19 | #include <linux/types.h> | 
| Hans-Christian Egtvedt | e4967d6 | 2009-02-05 13:10:59 +0100 | [diff] [blame] | 20 | #include <linux/io.h> | 
 | 21 |  | 
 | 22 | #include <sound/core.h> | 
 | 23 | #include <sound/initval.h> | 
 | 24 | #include <sound/pcm.h> | 
 | 25 | #include <sound/pcm_params.h> | 
 | 26 | #include <sound/atmel-abdac.h> | 
 | 27 |  | 
 | 28 | /* DAC register offsets */ | 
 | 29 | #define DAC_DATA                                0x0000 | 
 | 30 | #define DAC_CTRL                                0x0008 | 
 | 31 | #define DAC_INT_MASK                            0x000c | 
 | 32 | #define DAC_INT_EN                              0x0010 | 
 | 33 | #define DAC_INT_DIS                             0x0014 | 
 | 34 | #define DAC_INT_CLR                             0x0018 | 
 | 35 | #define DAC_INT_STATUS                          0x001c | 
 | 36 |  | 
 | 37 | /* Bitfields in CTRL */ | 
 | 38 | #define DAC_SWAP_OFFSET                         30 | 
 | 39 | #define DAC_SWAP_SIZE                           1 | 
 | 40 | #define DAC_EN_OFFSET                           31 | 
 | 41 | #define DAC_EN_SIZE                             1 | 
 | 42 |  | 
 | 43 | /* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */ | 
 | 44 | #define DAC_UNDERRUN_OFFSET                     28 | 
 | 45 | #define DAC_UNDERRUN_SIZE                       1 | 
 | 46 | #define DAC_TX_READY_OFFSET                     29 | 
 | 47 | #define DAC_TX_READY_SIZE                       1 | 
 | 48 |  | 
 | 49 | /* Bit manipulation macros */ | 
 | 50 | #define DAC_BIT(name)					\ | 
 | 51 | 	(1 << DAC_##name##_OFFSET) | 
 | 52 | #define DAC_BF(name, value)				\ | 
 | 53 | 	(((value) & ((1 << DAC_##name##_SIZE) - 1))	\ | 
 | 54 | 	 << DAC_##name##_OFFSET) | 
 | 55 | #define DAC_BFEXT(name, value)				\ | 
 | 56 | 	(((value) >> DAC_##name##_OFFSET)		\ | 
 | 57 | 	 & ((1 << DAC_##name##_SIZE) - 1)) | 
 | 58 | #define DAC_BFINS(name, value, old)			\ | 
 | 59 | 	(((old) & ~(((1 << DAC_##name##_SIZE) - 1)	\ | 
 | 60 | 		    << DAC_##name##_OFFSET))		\ | 
 | 61 | 	 | DAC_BF(name, value)) | 
 | 62 |  | 
 | 63 | /* Register access macros */ | 
 | 64 | #define dac_readl(port, reg)				\ | 
 | 65 | 	__raw_readl((port)->regs + DAC_##reg) | 
 | 66 | #define dac_writel(port, reg, value)			\ | 
 | 67 | 	__raw_writel((value), (port)->regs + DAC_##reg) | 
 | 68 |  | 
 | 69 | /* | 
 | 70 |  * ABDAC supports a maximum of 6 different rates from a generic clock. The | 
 | 71 |  * generic clock has a power of two divider, which gives 6 steps from 192 kHz | 
 | 72 |  * to 5112 Hz. | 
 | 73 |  */ | 
 | 74 | #define MAX_NUM_RATES	6 | 
 | 75 | /* ALSA seems to use rates between 192000 Hz and 5112 Hz. */ | 
 | 76 | #define RATE_MAX	192000 | 
 | 77 | #define RATE_MIN	5112 | 
 | 78 |  | 
 | 79 | enum { | 
 | 80 | 	DMA_READY = 0, | 
 | 81 | }; | 
 | 82 |  | 
 | 83 | struct atmel_abdac_dma { | 
 | 84 | 	struct dma_chan		*chan; | 
 | 85 | 	struct dw_cyclic_desc	*cdesc; | 
 | 86 | }; | 
 | 87 |  | 
 | 88 | struct atmel_abdac { | 
 | 89 | 	struct clk				*pclk; | 
 | 90 | 	struct clk				*sample_clk; | 
 | 91 | 	struct platform_device			*pdev; | 
 | 92 | 	struct atmel_abdac_dma			dma; | 
 | 93 |  | 
 | 94 | 	struct snd_pcm_hw_constraint_list	constraints_rates; | 
 | 95 | 	struct snd_pcm_substream		*substream; | 
 | 96 | 	struct snd_card				*card; | 
 | 97 | 	struct snd_pcm				*pcm; | 
 | 98 |  | 
 | 99 | 	void __iomem				*regs; | 
 | 100 | 	unsigned long				flags; | 
 | 101 | 	unsigned int				rates[MAX_NUM_RATES]; | 
 | 102 | 	unsigned int				rates_num; | 
 | 103 | 	int					irq; | 
 | 104 | }; | 
 | 105 |  | 
 | 106 | #define get_dac(card) ((struct atmel_abdac *)(card)->private_data) | 
 | 107 |  | 
 | 108 | /* This function is called by the DMA driver. */ | 
 | 109 | static void atmel_abdac_dma_period_done(void *arg) | 
 | 110 | { | 
 | 111 | 	struct atmel_abdac *dac = arg; | 
 | 112 | 	snd_pcm_period_elapsed(dac->substream); | 
 | 113 | } | 
 | 114 |  | 
 | 115 | static int atmel_abdac_prepare_dma(struct atmel_abdac *dac, | 
 | 116 | 		struct snd_pcm_substream *substream, | 
 | 117 | 		enum dma_data_direction direction) | 
 | 118 | { | 
 | 119 | 	struct dma_chan			*chan = dac->dma.chan; | 
 | 120 | 	struct dw_cyclic_desc		*cdesc; | 
 | 121 | 	struct snd_pcm_runtime		*runtime = substream->runtime; | 
 | 122 | 	unsigned long			buffer_len, period_len; | 
 | 123 |  | 
 | 124 | 	/* | 
 | 125 | 	 * We don't do DMA on "complex" transfers, i.e. with | 
 | 126 | 	 * non-halfword-aligned buffers or lengths. | 
 | 127 | 	 */ | 
 | 128 | 	if (runtime->dma_addr & 1 || runtime->buffer_size & 1) { | 
 | 129 | 		dev_dbg(&dac->pdev->dev, "too complex transfer\n"); | 
 | 130 | 		return -EINVAL; | 
 | 131 | 	} | 
 | 132 |  | 
 | 133 | 	buffer_len = frames_to_bytes(runtime, runtime->buffer_size); | 
 | 134 | 	period_len = frames_to_bytes(runtime, runtime->period_size); | 
 | 135 |  | 
 | 136 | 	cdesc = dw_dma_cyclic_prep(chan, runtime->dma_addr, buffer_len, | 
| Vinod Koul | 35e1658 | 2011-10-14 10:49:30 +0530 | [diff] [blame] | 137 | 			period_len, DMA_MEM_TO_DEV); | 
| Hans-Christian Egtvedt | e4967d6 | 2009-02-05 13:10:59 +0100 | [diff] [blame] | 138 | 	if (IS_ERR(cdesc)) { | 
 | 139 | 		dev_dbg(&dac->pdev->dev, "could not prepare cyclic DMA\n"); | 
 | 140 | 		return PTR_ERR(cdesc); | 
 | 141 | 	} | 
 | 142 |  | 
 | 143 | 	cdesc->period_callback = atmel_abdac_dma_period_done; | 
 | 144 | 	cdesc->period_callback_param = dac; | 
 | 145 |  | 
 | 146 | 	dac->dma.cdesc = cdesc; | 
 | 147 |  | 
 | 148 | 	set_bit(DMA_READY, &dac->flags); | 
 | 149 |  | 
 | 150 | 	return 0; | 
 | 151 | } | 
 | 152 |  | 
 | 153 | static struct snd_pcm_hardware atmel_abdac_hw = { | 
 | 154 | 	.info			= (SNDRV_PCM_INFO_MMAP | 
 | 155 | 				  | SNDRV_PCM_INFO_MMAP_VALID | 
 | 156 | 				  | SNDRV_PCM_INFO_INTERLEAVED | 
 | 157 | 				  | SNDRV_PCM_INFO_BLOCK_TRANSFER | 
 | 158 | 				  | SNDRV_PCM_INFO_RESUME | 
 | 159 | 				  | SNDRV_PCM_INFO_PAUSE), | 
 | 160 | 	.formats		= (SNDRV_PCM_FMTBIT_S16_BE), | 
 | 161 | 	.rates			= (SNDRV_PCM_RATE_KNOT), | 
 | 162 | 	.rate_min		= RATE_MIN, | 
 | 163 | 	.rate_max		= RATE_MAX, | 
 | 164 | 	.channels_min		= 2, | 
 | 165 | 	.channels_max		= 2, | 
 | 166 | 	.buffer_bytes_max	= 64 * 4096, | 
 | 167 | 	.period_bytes_min	= 4096, | 
 | 168 | 	.period_bytes_max	= 4096, | 
| Hans-Christian Egtvedt | fa075ed | 2009-04-02 13:42:26 +0200 | [diff] [blame] | 169 | 	.periods_min		= 6, | 
| Hans-Christian Egtvedt | e4967d6 | 2009-02-05 13:10:59 +0100 | [diff] [blame] | 170 | 	.periods_max		= 64, | 
 | 171 | }; | 
 | 172 |  | 
 | 173 | static int atmel_abdac_open(struct snd_pcm_substream *substream) | 
 | 174 | { | 
 | 175 | 	struct atmel_abdac *dac = snd_pcm_substream_chip(substream); | 
 | 176 |  | 
 | 177 | 	dac->substream = substream; | 
 | 178 | 	atmel_abdac_hw.rate_max = dac->rates[dac->rates_num - 1]; | 
 | 179 | 	atmel_abdac_hw.rate_min = dac->rates[0]; | 
 | 180 | 	substream->runtime->hw = atmel_abdac_hw; | 
 | 181 |  | 
 | 182 | 	return snd_pcm_hw_constraint_list(substream->runtime, 0, | 
 | 183 | 			SNDRV_PCM_HW_PARAM_RATE, &dac->constraints_rates); | 
 | 184 | } | 
 | 185 |  | 
 | 186 | static int atmel_abdac_close(struct snd_pcm_substream *substream) | 
 | 187 | { | 
 | 188 | 	struct atmel_abdac *dac = snd_pcm_substream_chip(substream); | 
 | 189 | 	dac->substream = NULL; | 
 | 190 | 	return 0; | 
 | 191 | } | 
 | 192 |  | 
 | 193 | static int atmel_abdac_hw_params(struct snd_pcm_substream *substream, | 
 | 194 | 		struct snd_pcm_hw_params *hw_params) | 
 | 195 | { | 
 | 196 | 	struct atmel_abdac *dac = snd_pcm_substream_chip(substream); | 
 | 197 | 	int retval; | 
 | 198 |  | 
 | 199 | 	retval = snd_pcm_lib_malloc_pages(substream, | 
 | 200 | 			params_buffer_bytes(hw_params)); | 
 | 201 | 	if (retval < 0) | 
 | 202 | 		return retval; | 
 | 203 | 	/* snd_pcm_lib_malloc_pages returns 1 if buffer is changed. */ | 
 | 204 | 	if (retval == 1) | 
 | 205 | 		if (test_and_clear_bit(DMA_READY, &dac->flags)) | 
 | 206 | 			dw_dma_cyclic_free(dac->dma.chan); | 
 | 207 |  | 
 | 208 | 	return retval; | 
 | 209 | } | 
 | 210 |  | 
 | 211 | static int atmel_abdac_hw_free(struct snd_pcm_substream *substream) | 
 | 212 | { | 
 | 213 | 	struct atmel_abdac *dac = snd_pcm_substream_chip(substream); | 
 | 214 | 	if (test_and_clear_bit(DMA_READY, &dac->flags)) | 
 | 215 | 		dw_dma_cyclic_free(dac->dma.chan); | 
 | 216 | 	return snd_pcm_lib_free_pages(substream); | 
 | 217 | } | 
 | 218 |  | 
 | 219 | static int atmel_abdac_prepare(struct snd_pcm_substream *substream) | 
 | 220 | { | 
 | 221 | 	struct atmel_abdac *dac = snd_pcm_substream_chip(substream); | 
 | 222 | 	int retval; | 
 | 223 |  | 
 | 224 | 	retval = clk_set_rate(dac->sample_clk, 256 * substream->runtime->rate); | 
 | 225 | 	if (retval) | 
 | 226 | 		return retval; | 
 | 227 |  | 
 | 228 | 	if (!test_bit(DMA_READY, &dac->flags)) | 
 | 229 | 		retval = atmel_abdac_prepare_dma(dac, substream, DMA_TO_DEVICE); | 
 | 230 |  | 
 | 231 | 	return retval; | 
 | 232 | } | 
 | 233 |  | 
 | 234 | static int atmel_abdac_trigger(struct snd_pcm_substream *substream, int cmd) | 
 | 235 | { | 
 | 236 | 	struct atmel_abdac *dac = snd_pcm_substream_chip(substream); | 
 | 237 | 	int retval = 0; | 
 | 238 |  | 
 | 239 | 	switch (cmd) { | 
 | 240 | 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: /* fall through */ | 
 | 241 | 	case SNDRV_PCM_TRIGGER_RESUME: /* fall through */ | 
 | 242 | 	case SNDRV_PCM_TRIGGER_START: | 
 | 243 | 		clk_enable(dac->sample_clk); | 
 | 244 | 		retval = dw_dma_cyclic_start(dac->dma.chan); | 
 | 245 | 		if (retval) | 
 | 246 | 			goto out; | 
 | 247 | 		dac_writel(dac, CTRL, DAC_BIT(EN)); | 
 | 248 | 		break; | 
 | 249 | 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH: /* fall through */ | 
 | 250 | 	case SNDRV_PCM_TRIGGER_SUSPEND: /* fall through */ | 
 | 251 | 	case SNDRV_PCM_TRIGGER_STOP: | 
 | 252 | 		dw_dma_cyclic_stop(dac->dma.chan); | 
 | 253 | 		dac_writel(dac, DATA, 0); | 
 | 254 | 		dac_writel(dac, CTRL, 0); | 
 | 255 | 		clk_disable(dac->sample_clk); | 
 | 256 | 		break; | 
 | 257 | 	default: | 
 | 258 | 		retval = -EINVAL; | 
 | 259 | 		break; | 
 | 260 | 	} | 
 | 261 | out: | 
 | 262 | 	return retval; | 
 | 263 | } | 
 | 264 |  | 
 | 265 | static snd_pcm_uframes_t | 
 | 266 | atmel_abdac_pointer(struct snd_pcm_substream *substream) | 
 | 267 | { | 
 | 268 | 	struct atmel_abdac	*dac = snd_pcm_substream_chip(substream); | 
 | 269 | 	struct snd_pcm_runtime	*runtime = substream->runtime; | 
 | 270 | 	snd_pcm_uframes_t	frames; | 
 | 271 | 	unsigned long		bytes; | 
 | 272 |  | 
 | 273 | 	bytes = dw_dma_get_src_addr(dac->dma.chan); | 
 | 274 | 	bytes -= runtime->dma_addr; | 
 | 275 |  | 
 | 276 | 	frames = bytes_to_frames(runtime, bytes); | 
 | 277 | 	if (frames >= runtime->buffer_size) | 
 | 278 | 		frames -= runtime->buffer_size; | 
 | 279 |  | 
 | 280 | 	return frames; | 
 | 281 | } | 
 | 282 |  | 
 | 283 | static irqreturn_t abdac_interrupt(int irq, void *dev_id) | 
 | 284 | { | 
 | 285 | 	struct atmel_abdac *dac = dev_id; | 
 | 286 | 	u32 status; | 
 | 287 |  | 
 | 288 | 	status = dac_readl(dac, INT_STATUS); | 
 | 289 | 	if (status & DAC_BIT(UNDERRUN)) { | 
 | 290 | 		dev_err(&dac->pdev->dev, "underrun detected\n"); | 
 | 291 | 		dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN)); | 
 | 292 | 	} else { | 
 | 293 | 		dev_err(&dac->pdev->dev, "spurious interrupt (status=0x%x)\n", | 
 | 294 | 			status); | 
 | 295 | 		dac_writel(dac, INT_CLR, status); | 
 | 296 | 	} | 
 | 297 |  | 
 | 298 | 	return IRQ_HANDLED; | 
 | 299 | } | 
 | 300 |  | 
 | 301 | static struct snd_pcm_ops atmel_abdac_ops = { | 
 | 302 | 	.open		= atmel_abdac_open, | 
 | 303 | 	.close		= atmel_abdac_close, | 
 | 304 | 	.ioctl		= snd_pcm_lib_ioctl, | 
 | 305 | 	.hw_params	= atmel_abdac_hw_params, | 
 | 306 | 	.hw_free	= atmel_abdac_hw_free, | 
 | 307 | 	.prepare	= atmel_abdac_prepare, | 
 | 308 | 	.trigger	= atmel_abdac_trigger, | 
 | 309 | 	.pointer	= atmel_abdac_pointer, | 
 | 310 | }; | 
 | 311 |  | 
 | 312 | static int __devinit atmel_abdac_pcm_new(struct atmel_abdac *dac) | 
 | 313 | { | 
 | 314 | 	struct snd_pcm_hardware hw = atmel_abdac_hw; | 
 | 315 | 	struct snd_pcm *pcm; | 
 | 316 | 	int retval; | 
 | 317 |  | 
 | 318 | 	retval = snd_pcm_new(dac->card, dac->card->shortname, | 
 | 319 | 			dac->pdev->id, 1, 0, &pcm); | 
 | 320 | 	if (retval) | 
 | 321 | 		return retval; | 
 | 322 |  | 
 | 323 | 	strcpy(pcm->name, dac->card->shortname); | 
 | 324 | 	pcm->private_data = dac; | 
 | 325 | 	pcm->info_flags = 0; | 
 | 326 | 	dac->pcm = pcm; | 
 | 327 |  | 
 | 328 | 	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &atmel_abdac_ops); | 
 | 329 |  | 
 | 330 | 	retval = snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, | 
 | 331 | 			&dac->pdev->dev, hw.periods_min * hw.period_bytes_min, | 
 | 332 | 			hw.buffer_bytes_max); | 
 | 333 |  | 
 | 334 | 	return retval; | 
 | 335 | } | 
 | 336 |  | 
 | 337 | static bool filter(struct dma_chan *chan, void *slave) | 
 | 338 | { | 
 | 339 | 	struct dw_dma_slave *dws = slave; | 
 | 340 |  | 
 | 341 | 	if (dws->dma_dev == chan->device->dev) { | 
 | 342 | 		chan->private = dws; | 
 | 343 | 		return true; | 
 | 344 | 	} else | 
 | 345 | 		return false; | 
 | 346 | } | 
 | 347 |  | 
 | 348 | static int set_sample_rates(struct atmel_abdac *dac) | 
 | 349 | { | 
 | 350 | 	long new_rate = RATE_MAX; | 
 | 351 | 	int retval = -EINVAL; | 
 | 352 | 	int index = 0; | 
 | 353 |  | 
 | 354 | 	/* we start at 192 kHz and work our way down to 5112 Hz */ | 
 | 355 | 	while (new_rate >= RATE_MIN && index < (MAX_NUM_RATES + 1)) { | 
 | 356 | 		new_rate = clk_round_rate(dac->sample_clk, 256 * new_rate); | 
 | 357 | 		if (new_rate < 0) | 
 | 358 | 			break; | 
 | 359 | 		/* make sure we are below the ABDAC clock */ | 
 | 360 | 		if (new_rate <= clk_get_rate(dac->pclk)) { | 
 | 361 | 			dac->rates[index] = new_rate / 256; | 
 | 362 | 			index++; | 
 | 363 | 		} | 
 | 364 | 		/* divide by 256 and then by two to get next rate */ | 
 | 365 | 		new_rate /= 256 * 2; | 
 | 366 | 	} | 
 | 367 |  | 
 | 368 | 	if (index) { | 
 | 369 | 		int i; | 
 | 370 |  | 
 | 371 | 		/* reverse array, smallest go first */ | 
 | 372 | 		for (i = 0; i < (index / 2); i++) { | 
 | 373 | 			unsigned int tmp = dac->rates[index - 1 - i]; | 
 | 374 | 			dac->rates[index - 1 - i] = dac->rates[i]; | 
 | 375 | 			dac->rates[i] = tmp; | 
 | 376 | 		} | 
 | 377 |  | 
 | 378 | 		dac->constraints_rates.count = index; | 
 | 379 | 		dac->constraints_rates.list = dac->rates; | 
 | 380 | 		dac->constraints_rates.mask = 0; | 
 | 381 | 		dac->rates_num = index; | 
 | 382 |  | 
 | 383 | 		retval = 0; | 
 | 384 | 	} | 
 | 385 |  | 
 | 386 | 	return retval; | 
 | 387 | } | 
 | 388 |  | 
 | 389 | static int __devinit atmel_abdac_probe(struct platform_device *pdev) | 
 | 390 | { | 
 | 391 | 	struct snd_card		*card; | 
 | 392 | 	struct atmel_abdac	*dac; | 
 | 393 | 	struct resource		*regs; | 
 | 394 | 	struct atmel_abdac_pdata	*pdata; | 
 | 395 | 	struct clk		*pclk; | 
 | 396 | 	struct clk		*sample_clk; | 
 | 397 | 	int			retval; | 
 | 398 | 	int			irq; | 
 | 399 |  | 
 | 400 | 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 401 | 	if (!regs) { | 
 | 402 | 		dev_dbg(&pdev->dev, "no memory resource\n"); | 
 | 403 | 		return -ENXIO; | 
 | 404 | 	} | 
 | 405 |  | 
 | 406 | 	irq = platform_get_irq(pdev, 0); | 
 | 407 | 	if (irq < 0) { | 
 | 408 | 		dev_dbg(&pdev->dev, "could not get IRQ number\n"); | 
 | 409 | 		return irq; | 
 | 410 | 	} | 
 | 411 |  | 
 | 412 | 	pdata = pdev->dev.platform_data; | 
 | 413 | 	if (!pdata) { | 
 | 414 | 		dev_dbg(&pdev->dev, "no platform data\n"); | 
 | 415 | 		return -ENXIO; | 
 | 416 | 	} | 
 | 417 |  | 
 | 418 | 	pclk = clk_get(&pdev->dev, "pclk"); | 
 | 419 | 	if (IS_ERR(pclk)) { | 
 | 420 | 		dev_dbg(&pdev->dev, "no peripheral clock\n"); | 
 | 421 | 		return PTR_ERR(pclk); | 
 | 422 | 	} | 
 | 423 | 	sample_clk = clk_get(&pdev->dev, "sample_clk"); | 
| Vasiliy Kulikov | c0763e6 | 2010-11-21 20:40:07 +0300 | [diff] [blame] | 424 | 	if (IS_ERR(sample_clk)) { | 
| Hans-Christian Egtvedt | e4967d6 | 2009-02-05 13:10:59 +0100 | [diff] [blame] | 425 | 		dev_dbg(&pdev->dev, "no sample clock\n"); | 
| Takashi Iwai | 1beded5 | 2010-11-22 08:58:13 +0100 | [diff] [blame] | 426 | 		retval = PTR_ERR(sample_clk); | 
| Hans-Christian Egtvedt | e4967d6 | 2009-02-05 13:10:59 +0100 | [diff] [blame] | 427 | 		goto out_put_pclk; | 
 | 428 | 	} | 
 | 429 | 	clk_enable(pclk); | 
 | 430 |  | 
 | 431 | 	retval = snd_card_create(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, | 
 | 432 | 			THIS_MODULE, sizeof(struct atmel_abdac), &card); | 
 | 433 | 	if (retval) { | 
 | 434 | 		dev_dbg(&pdev->dev, "could not create sound card device\n"); | 
 | 435 | 		goto out_put_sample_clk; | 
 | 436 | 	} | 
 | 437 |  | 
 | 438 | 	dac = get_dac(card); | 
 | 439 |  | 
 | 440 | 	dac->irq = irq; | 
 | 441 | 	dac->card = card; | 
 | 442 | 	dac->pclk = pclk; | 
 | 443 | 	dac->sample_clk = sample_clk; | 
 | 444 | 	dac->pdev = pdev; | 
 | 445 |  | 
 | 446 | 	retval = set_sample_rates(dac); | 
 | 447 | 	if (retval < 0) { | 
 | 448 | 		dev_dbg(&pdev->dev, "could not set supported rates\n"); | 
 | 449 | 		goto out_free_card; | 
 | 450 | 	} | 
 | 451 |  | 
| Joe Perches | 28f65c1 | 2011-06-09 09:13:32 -0700 | [diff] [blame] | 452 | 	dac->regs = ioremap(regs->start, resource_size(regs)); | 
| Hans-Christian Egtvedt | e4967d6 | 2009-02-05 13:10:59 +0100 | [diff] [blame] | 453 | 	if (!dac->regs) { | 
 | 454 | 		dev_dbg(&pdev->dev, "could not remap register memory\n"); | 
 | 455 | 		goto out_free_card; | 
 | 456 | 	} | 
 | 457 |  | 
 | 458 | 	/* make sure the DAC is silent and disabled */ | 
 | 459 | 	dac_writel(dac, DATA, 0); | 
 | 460 | 	dac_writel(dac, CTRL, 0); | 
 | 461 |  | 
 | 462 | 	retval = request_irq(irq, abdac_interrupt, 0, "abdac", dac); | 
 | 463 | 	if (retval) { | 
 | 464 | 		dev_dbg(&pdev->dev, "could not request irq\n"); | 
 | 465 | 		goto out_unmap_regs; | 
 | 466 | 	} | 
 | 467 |  | 
 | 468 | 	snd_card_set_dev(card, &pdev->dev); | 
 | 469 |  | 
 | 470 | 	if (pdata->dws.dma_dev) { | 
| Hans-Christian Egtvedt | e4967d6 | 2009-02-05 13:10:59 +0100 | [diff] [blame] | 471 | 		dma_cap_mask_t mask; | 
 | 472 |  | 
| Hans-Christian Egtvedt | e4967d6 | 2009-02-05 13:10:59 +0100 | [diff] [blame] | 473 | 		dma_cap_zero(mask); | 
 | 474 | 		dma_cap_set(DMA_SLAVE, mask); | 
 | 475 |  | 
| Viresh Kumar | e2b35f3 | 2012-02-01 16:12:27 +0530 | [diff] [blame] | 476 | 		dac->dma.chan = dma_request_channel(mask, filter, &pdata->dws); | 
 | 477 | 		if (dac->dma.chan) { | 
 | 478 | 			struct dma_slave_config dma_conf = { | 
 | 479 | 				.dst_addr = regs->start + DAC_DATA, | 
 | 480 | 				.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, | 
 | 481 | 				.src_maxburst = 1, | 
 | 482 | 				.dst_maxburst = 1, | 
 | 483 | 				.direction = DMA_MEM_TO_DEV, | 
 | 484 | 				.device_fc = false, | 
 | 485 | 			}; | 
 | 486 |  | 
 | 487 | 			dmaengine_slave_config(dac->dma.chan, &dma_conf); | 
 | 488 | 		} | 
| Hans-Christian Egtvedt | e4967d6 | 2009-02-05 13:10:59 +0100 | [diff] [blame] | 489 | 	} | 
 | 490 | 	if (!pdata->dws.dma_dev || !dac->dma.chan) { | 
 | 491 | 		dev_dbg(&pdev->dev, "DMA not available\n"); | 
 | 492 | 		retval = -ENODEV; | 
 | 493 | 		goto out_unset_card_dev; | 
 | 494 | 	} | 
 | 495 |  | 
 | 496 | 	strcpy(card->driver, "Atmel ABDAC"); | 
 | 497 | 	strcpy(card->shortname, "Atmel ABDAC"); | 
 | 498 | 	sprintf(card->longname, "Atmel Audio Bitstream DAC"); | 
 | 499 |  | 
 | 500 | 	retval = atmel_abdac_pcm_new(dac); | 
 | 501 | 	if (retval) { | 
 | 502 | 		dev_dbg(&pdev->dev, "could not register ABDAC pcm device\n"); | 
 | 503 | 		goto out_release_dma; | 
 | 504 | 	} | 
 | 505 |  | 
 | 506 | 	retval = snd_card_register(card); | 
 | 507 | 	if (retval) { | 
 | 508 | 		dev_dbg(&pdev->dev, "could not register sound card\n"); | 
 | 509 | 		goto out_release_dma; | 
 | 510 | 	} | 
 | 511 |  | 
 | 512 | 	platform_set_drvdata(pdev, card); | 
 | 513 |  | 
 | 514 | 	dev_info(&pdev->dev, "Atmel ABDAC at 0x%p using %s\n", | 
| Hans-Christian Egtvedt | 60a56cc | 2009-04-02 08:21:18 +0200 | [diff] [blame] | 515 | 			dac->regs, dev_name(&dac->dma.chan->dev->device)); | 
| Hans-Christian Egtvedt | e4967d6 | 2009-02-05 13:10:59 +0100 | [diff] [blame] | 516 |  | 
 | 517 | 	return retval; | 
 | 518 |  | 
 | 519 | out_release_dma: | 
 | 520 | 	dma_release_channel(dac->dma.chan); | 
 | 521 | 	dac->dma.chan = NULL; | 
 | 522 | out_unset_card_dev: | 
 | 523 | 	snd_card_set_dev(card, NULL); | 
 | 524 | 	free_irq(irq, dac); | 
 | 525 | out_unmap_regs: | 
 | 526 | 	iounmap(dac->regs); | 
 | 527 | out_free_card: | 
 | 528 | 	snd_card_free(card); | 
 | 529 | out_put_sample_clk: | 
 | 530 | 	clk_put(sample_clk); | 
 | 531 | 	clk_disable(pclk); | 
 | 532 | out_put_pclk: | 
 | 533 | 	clk_put(pclk); | 
 | 534 | 	return retval; | 
 | 535 | } | 
 | 536 |  | 
 | 537 | #ifdef CONFIG_PM | 
 | 538 | static int atmel_abdac_suspend(struct platform_device *pdev, pm_message_t msg) | 
 | 539 | { | 
 | 540 | 	struct snd_card *card = platform_get_drvdata(pdev); | 
 | 541 | 	struct atmel_abdac *dac = card->private_data; | 
 | 542 |  | 
 | 543 | 	dw_dma_cyclic_stop(dac->dma.chan); | 
 | 544 | 	clk_disable(dac->sample_clk); | 
 | 545 | 	clk_disable(dac->pclk); | 
 | 546 |  | 
 | 547 | 	return 0; | 
 | 548 | } | 
 | 549 |  | 
 | 550 | static int atmel_abdac_resume(struct platform_device *pdev) | 
 | 551 | { | 
 | 552 | 	struct snd_card *card = platform_get_drvdata(pdev); | 
 | 553 | 	struct atmel_abdac *dac = card->private_data; | 
 | 554 |  | 
 | 555 | 	clk_enable(dac->pclk); | 
 | 556 | 	clk_enable(dac->sample_clk); | 
 | 557 | 	if (test_bit(DMA_READY, &dac->flags)) | 
 | 558 | 		dw_dma_cyclic_start(dac->dma.chan); | 
 | 559 |  | 
 | 560 | 	return 0; | 
 | 561 | } | 
 | 562 | #else | 
 | 563 | #define atmel_abdac_suspend NULL | 
 | 564 | #define atmel_abdac_resume NULL | 
 | 565 | #endif | 
 | 566 |  | 
 | 567 | static int __devexit atmel_abdac_remove(struct platform_device *pdev) | 
 | 568 | { | 
 | 569 | 	struct snd_card *card = platform_get_drvdata(pdev); | 
 | 570 | 	struct atmel_abdac *dac = get_dac(card); | 
 | 571 |  | 
 | 572 | 	clk_put(dac->sample_clk); | 
 | 573 | 	clk_disable(dac->pclk); | 
 | 574 | 	clk_put(dac->pclk); | 
 | 575 |  | 
 | 576 | 	dma_release_channel(dac->dma.chan); | 
 | 577 | 	dac->dma.chan = NULL; | 
 | 578 | 	snd_card_set_dev(card, NULL); | 
 | 579 | 	iounmap(dac->regs); | 
 | 580 | 	free_irq(dac->irq, dac); | 
 | 581 | 	snd_card_free(card); | 
 | 582 |  | 
 | 583 | 	platform_set_drvdata(pdev, NULL); | 
 | 584 |  | 
 | 585 | 	return 0; | 
 | 586 | } | 
 | 587 |  | 
 | 588 | static struct platform_driver atmel_abdac_driver = { | 
 | 589 | 	.remove		= __devexit_p(atmel_abdac_remove), | 
 | 590 | 	.driver		= { | 
 | 591 | 		.name	= "atmel_abdac", | 
 | 592 | 	}, | 
 | 593 | 	.suspend	= atmel_abdac_suspend, | 
 | 594 | 	.resume		= atmel_abdac_resume, | 
 | 595 | }; | 
 | 596 |  | 
 | 597 | static int __init atmel_abdac_init(void) | 
 | 598 | { | 
 | 599 | 	return platform_driver_probe(&atmel_abdac_driver, | 
 | 600 | 			atmel_abdac_probe); | 
 | 601 | } | 
 | 602 | module_init(atmel_abdac_init); | 
 | 603 |  | 
 | 604 | static void __exit atmel_abdac_exit(void) | 
 | 605 | { | 
 | 606 | 	platform_driver_unregister(&atmel_abdac_driver); | 
 | 607 | } | 
 | 608 | module_exit(atmel_abdac_exit); | 
 | 609 |  | 
 | 610 | MODULE_LICENSE("GPL"); | 
 | 611 | MODULE_DESCRIPTION("Driver for Atmel Audio Bitstream DAC (ABDAC)"); | 
| Hans-Christian Egtvedt | 0cfae7c | 2011-06-28 16:59:14 +0200 | [diff] [blame] | 612 | MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>"); |