| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 1 | /* | 
|  | 2 | * pata_cs5536.c	- CS5536 PATA for new ATA layer | 
|  | 3 | *			  (C) 2007 Martin K. Petersen <mkp@mkp.net> | 
|  | 4 | * | 
|  | 5 | * This program is free software; you can redistribute it and/or modify | 
|  | 6 | * it under the terms of the GNU General Public License version 2 as | 
|  | 7 | * published by the Free Software Foundation. | 
|  | 8 | * | 
|  | 9 | * This program is distributed in the hope that it will be useful, | 
|  | 10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | 11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the | 
|  | 12 | * GNU General Public License for more details. | 
|  | 13 | * | 
|  | 14 | * You should have received a copy of the GNU General Public License | 
|  | 15 | * along with this program; if not, write to the Free Software | 
|  | 16 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307	 USA | 
|  | 17 | * | 
|  | 18 | * Documentation: | 
|  | 19 | *	Available from AMD web site. | 
|  | 20 | * | 
|  | 21 | * The IDE timing registers for the CS5536 live in the Geode Machine | 
|  | 22 | * Specific Register file and not PCI config space.  Most BIOSes | 
|  | 23 | * virtualize the PCI registers so the chip looks like a standard IDE | 
|  | 24 | * controller.	Unfortunately not all implementations get this right. | 
|  | 25 | * In particular some have problems with unaligned accesses to the | 
|  | 26 | * virtualized PCI registers.  This driver always does full dword | 
|  | 27 | * writes to work around the issue.  Also, in case of a bad BIOS this | 
|  | 28 | * driver can be loaded with the "msr=1" parameter which forces using | 
|  | 29 | * the Machine Specific Registers to configure the device. | 
|  | 30 | */ | 
|  | 31 |  | 
|  | 32 | #include <linux/kernel.h> | 
|  | 33 | #include <linux/module.h> | 
|  | 34 | #include <linux/pci.h> | 
|  | 35 | #include <linux/init.h> | 
|  | 36 | #include <linux/blkdev.h> | 
|  | 37 | #include <linux/delay.h> | 
|  | 38 | #include <linux/libata.h> | 
|  | 39 | #include <scsi/scsi_host.h> | 
|  | 40 | #include <asm/msr.h> | 
|  | 41 |  | 
|  | 42 | #define DRV_NAME	"pata_cs5536" | 
| Martin K. Petersen | b6966a6 | 2008-02-13 01:41:44 -0500 | [diff] [blame] | 43 | #define DRV_VERSION	"0.0.7" | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 44 |  | 
|  | 45 | enum { | 
|  | 46 | CFG			= 0, | 
|  | 47 | DTC			= 1, | 
|  | 48 | CAST			= 2, | 
|  | 49 | ETC			= 3, | 
|  | 50 |  | 
|  | 51 | MSR_IDE_BASE		= 0x51300000, | 
|  | 52 | MSR_IDE_CFG		= (MSR_IDE_BASE + 0x10), | 
|  | 53 | MSR_IDE_DTC		= (MSR_IDE_BASE + 0x12), | 
|  | 54 | MSR_IDE_CAST		= (MSR_IDE_BASE + 0x13), | 
|  | 55 | MSR_IDE_ETC		= (MSR_IDE_BASE + 0x14), | 
|  | 56 |  | 
|  | 57 | PCI_IDE_CFG		= 0x40, | 
|  | 58 | PCI_IDE_DTC		= 0x48, | 
|  | 59 | PCI_IDE_CAST		= 0x4c, | 
|  | 60 | PCI_IDE_ETC		= 0x50, | 
|  | 61 |  | 
|  | 62 | IDE_CFG_CHANEN		= 0x2, | 
|  | 63 | IDE_CFG_CABLE		= 0x10000, | 
|  | 64 |  | 
|  | 65 | IDE_D0_SHIFT		= 24, | 
|  | 66 | IDE_D1_SHIFT		= 16, | 
|  | 67 | IDE_DRV_MASK		= 0xff, | 
|  | 68 |  | 
|  | 69 | IDE_CAST_D0_SHIFT	= 6, | 
|  | 70 | IDE_CAST_D1_SHIFT	= 4, | 
|  | 71 | IDE_CAST_DRV_MASK	= 0x3, | 
|  | 72 | IDE_CAST_CMD_MASK	= 0xff, | 
|  | 73 | IDE_CAST_CMD_SHIFT	= 24, | 
|  | 74 |  | 
|  | 75 | IDE_ETC_NODMA		= 0x03, | 
|  | 76 | }; | 
|  | 77 |  | 
|  | 78 | static int use_msr; | 
|  | 79 |  | 
|  | 80 | static const u32 msr_reg[4] = { | 
|  | 81 | MSR_IDE_CFG, MSR_IDE_DTC, MSR_IDE_CAST, MSR_IDE_ETC, | 
|  | 82 | }; | 
|  | 83 |  | 
|  | 84 | static const u8 pci_reg[4] = { | 
|  | 85 | PCI_IDE_CFG, PCI_IDE_DTC, PCI_IDE_CAST, PCI_IDE_ETC, | 
|  | 86 | }; | 
|  | 87 |  | 
| Harvey Harrison | 2072fb5 | 2008-02-13 21:14:23 -0800 | [diff] [blame] | 88 | static inline int cs5536_read(struct pci_dev *pdev, int reg, u32 *val) | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 89 | { | 
|  | 90 | if (unlikely(use_msr)) { | 
|  | 91 | u32 dummy; | 
|  | 92 |  | 
|  | 93 | rdmsr(msr_reg[reg], *val, dummy); | 
|  | 94 | return 0; | 
|  | 95 | } | 
|  | 96 |  | 
|  | 97 | return pci_read_config_dword(pdev, pci_reg[reg], val); | 
|  | 98 | } | 
|  | 99 |  | 
|  | 100 | static inline int cs5536_write(struct pci_dev *pdev, int reg, int val) | 
|  | 101 | { | 
|  | 102 | if (unlikely(use_msr)) { | 
|  | 103 | wrmsr(msr_reg[reg], val, 0); | 
|  | 104 | return 0; | 
|  | 105 | } | 
|  | 106 |  | 
|  | 107 | return pci_write_config_dword(pdev, pci_reg[reg], val); | 
|  | 108 | } | 
|  | 109 |  | 
|  | 110 | /** | 
|  | 111 | *	cs5536_cable_detect	-	detect cable type | 
|  | 112 | *	@ap: Port to detect on | 
|  | 113 | *	@deadline: deadline jiffies for the operation | 
|  | 114 | * | 
|  | 115 | *	Perform cable detection for ATA66 capable cable. Return a libata | 
|  | 116 | *	cable type. | 
|  | 117 | */ | 
|  | 118 |  | 
|  | 119 | static int cs5536_cable_detect(struct ata_port *ap) | 
|  | 120 | { | 
|  | 121 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 
|  | 122 | u32 cfg; | 
|  | 123 |  | 
|  | 124 | cs5536_read(pdev, CFG, &cfg); | 
|  | 125 |  | 
|  | 126 | if (cfg & (IDE_CFG_CABLE << ap->port_no)) | 
|  | 127 | return ATA_CBL_PATA80; | 
|  | 128 | else | 
|  | 129 | return ATA_CBL_PATA40; | 
|  | 130 | } | 
|  | 131 |  | 
|  | 132 | /** | 
|  | 133 | *	cs5536_set_piomode		-	PIO setup | 
|  | 134 | *	@ap: ATA interface | 
|  | 135 | *	@adev: device on the interface | 
|  | 136 | */ | 
|  | 137 |  | 
|  | 138 | static void cs5536_set_piomode(struct ata_port *ap, struct ata_device *adev) | 
|  | 139 | { | 
|  | 140 | static const u8 drv_timings[5] = { | 
|  | 141 | 0x98, 0x55, 0x32, 0x21, 0x20, | 
|  | 142 | }; | 
|  | 143 |  | 
|  | 144 | static const u8 addr_timings[5] = { | 
|  | 145 | 0x2, 0x1, 0x0, 0x0, 0x0, | 
|  | 146 | }; | 
|  | 147 |  | 
|  | 148 | static const u8 cmd_timings[5] = { | 
|  | 149 | 0x99, 0x92, 0x90, 0x22, 0x20, | 
|  | 150 | }; | 
|  | 151 |  | 
|  | 152 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 
|  | 153 | struct ata_device *pair = ata_dev_pair(adev); | 
|  | 154 | int mode = adev->pio_mode - XFER_PIO_0; | 
|  | 155 | int cmdmode = mode; | 
| Martin K. Petersen | b6966a6 | 2008-02-13 01:41:44 -0500 | [diff] [blame] | 156 | int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT; | 
|  | 157 | int cshift = adev->devno ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT; | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 158 | u32 dtc, cast, etc; | 
|  | 159 |  | 
|  | 160 | if (pair) | 
|  | 161 | cmdmode = min(mode, pair->pio_mode - XFER_PIO_0); | 
|  | 162 |  | 
|  | 163 | cs5536_read(pdev, DTC, &dtc); | 
|  | 164 | cs5536_read(pdev, CAST, &cast); | 
|  | 165 | cs5536_read(pdev, ETC, &etc); | 
|  | 166 |  | 
|  | 167 | dtc &= ~(IDE_DRV_MASK << dshift); | 
|  | 168 | dtc |= drv_timings[mode] << dshift; | 
|  | 169 |  | 
|  | 170 | cast &= ~(IDE_CAST_DRV_MASK << cshift); | 
|  | 171 | cast |= addr_timings[mode] << cshift; | 
|  | 172 |  | 
|  | 173 | cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT); | 
|  | 174 | cast |= cmd_timings[cmdmode] << IDE_CAST_CMD_SHIFT; | 
|  | 175 |  | 
|  | 176 | etc &= ~(IDE_DRV_MASK << dshift); | 
|  | 177 | etc |= IDE_ETC_NODMA << dshift; | 
|  | 178 |  | 
|  | 179 | cs5536_write(pdev, DTC, dtc); | 
|  | 180 | cs5536_write(pdev, CAST, cast); | 
|  | 181 | cs5536_write(pdev, ETC, etc); | 
|  | 182 | } | 
|  | 183 |  | 
|  | 184 | /** | 
|  | 185 | *	cs5536_set_dmamode		-	DMA timing setup | 
|  | 186 | *	@ap: ATA interface | 
|  | 187 | *	@adev: Device being configured | 
|  | 188 | * | 
|  | 189 | */ | 
|  | 190 |  | 
|  | 191 | static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev) | 
|  | 192 | { | 
|  | 193 | static const u8 udma_timings[6] = { | 
|  | 194 | 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6, | 
|  | 195 | }; | 
|  | 196 |  | 
|  | 197 | static const u8 mwdma_timings[3] = { | 
|  | 198 | 0x67, 0x21, 0x20, | 
|  | 199 | }; | 
|  | 200 |  | 
|  | 201 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 
|  | 202 | u32 dtc, etc; | 
|  | 203 | int mode = adev->dma_mode; | 
| Martin K. Petersen | b6966a6 | 2008-02-13 01:41:44 -0500 | [diff] [blame] | 204 | int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT; | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 205 |  | 
|  | 206 | if (mode >= XFER_UDMA_0) { | 
|  | 207 | cs5536_read(pdev, ETC, &etc); | 
|  | 208 |  | 
|  | 209 | etc &= ~(IDE_DRV_MASK << dshift); | 
|  | 210 | etc |= udma_timings[mode - XFER_UDMA_0] << dshift; | 
|  | 211 |  | 
|  | 212 | cs5536_write(pdev, ETC, etc); | 
|  | 213 | } else { /* MWDMA */ | 
|  | 214 | cs5536_read(pdev, DTC, &dtc); | 
|  | 215 |  | 
|  | 216 | dtc &= ~(IDE_DRV_MASK << dshift); | 
| Bartlomiej Zolnierkiewicz | 80f6fd3 | 2007-10-17 01:23:43 +0200 | [diff] [blame] | 217 | dtc |= mwdma_timings[mode - XFER_MW_DMA_0] << dshift; | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 218 |  | 
|  | 219 | cs5536_write(pdev, DTC, dtc); | 
|  | 220 | } | 
|  | 221 | } | 
|  | 222 |  | 
|  | 223 | static struct scsi_host_template cs5536_sht = { | 
|  | 224 | .module			= THIS_MODULE, | 
|  | 225 | .name			= DRV_NAME, | 
|  | 226 | .ioctl			= ata_scsi_ioctl, | 
|  | 227 | .queuecommand		= ata_scsi_queuecmd, | 
|  | 228 | .can_queue		= ATA_DEF_QUEUE, | 
|  | 229 | .this_id		= ATA_SHT_THIS_ID, | 
|  | 230 | .sg_tablesize		= LIBATA_MAX_PRD, | 
|  | 231 | .cmd_per_lun		= ATA_SHT_CMD_PER_LUN, | 
|  | 232 | .emulated		= ATA_SHT_EMULATED, | 
|  | 233 | .use_clustering		= ATA_SHT_USE_CLUSTERING, | 
|  | 234 | .proc_name		= DRV_NAME, | 
|  | 235 | .dma_boundary		= ATA_DMA_BOUNDARY, | 
|  | 236 | .slave_configure	= ata_scsi_slave_config, | 
|  | 237 | .slave_destroy		= ata_scsi_slave_destroy, | 
|  | 238 | .bios_param		= ata_std_bios_param, | 
|  | 239 | }; | 
|  | 240 |  | 
|  | 241 | static struct ata_port_operations cs5536_port_ops = { | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 242 | .set_piomode		= cs5536_set_piomode, | 
|  | 243 | .set_dmamode		= cs5536_set_dmamode, | 
|  | 244 | .mode_filter		= ata_pci_default_filter, | 
|  | 245 |  | 
|  | 246 | .tf_load		= ata_tf_load, | 
|  | 247 | .tf_read		= ata_tf_read, | 
|  | 248 | .check_status		= ata_check_status, | 
|  | 249 | .exec_command		= ata_exec_command, | 
|  | 250 | .dev_select		= ata_std_dev_select, | 
|  | 251 |  | 
|  | 252 | .freeze			= ata_bmdma_freeze, | 
|  | 253 | .thaw			= ata_bmdma_thaw, | 
|  | 254 | .error_handler		= ata_bmdma_error_handler, | 
|  | 255 | .post_internal_cmd	= ata_bmdma_post_internal_cmd, | 
|  | 256 | .cable_detect		= cs5536_cable_detect, | 
|  | 257 |  | 
|  | 258 | .bmdma_setup		= ata_bmdma_setup, | 
|  | 259 | .bmdma_start		= ata_bmdma_start, | 
|  | 260 | .bmdma_stop		= ata_bmdma_stop, | 
|  | 261 | .bmdma_status		= ata_bmdma_status, | 
|  | 262 |  | 
|  | 263 | .qc_prep		= ata_qc_prep, | 
|  | 264 | .qc_issue		= ata_qc_issue_prot, | 
|  | 265 |  | 
|  | 266 | .data_xfer		= ata_data_xfer, | 
|  | 267 |  | 
|  | 268 | .irq_handler		= ata_interrupt, | 
|  | 269 | .irq_clear		= ata_bmdma_irq_clear, | 
|  | 270 | .irq_on			= ata_irq_on, | 
| Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 271 |  | 
|  | 272 | .port_start		= ata_port_start, | 
|  | 273 | }; | 
|  | 274 |  | 
|  | 275 | /** | 
|  | 276 | *	cs5536_init_one | 
|  | 277 | *	@dev: PCI device | 
|  | 278 | *	@id: Entry in match table | 
|  | 279 | * | 
|  | 280 | */ | 
|  | 281 |  | 
|  | 282 | static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id) | 
|  | 283 | { | 
|  | 284 | static const struct ata_port_info info = { | 
|  | 285 | .sht = &cs5536_sht, | 
|  | 286 | .flags = ATA_FLAG_SLAVE_POSS, | 
|  | 287 | .pio_mask = 0x1f, | 
|  | 288 | .mwdma_mask = 0x07, | 
|  | 289 | .udma_mask = ATA_UDMA5, | 
|  | 290 | .port_ops = &cs5536_port_ops, | 
|  | 291 | }; | 
|  | 292 |  | 
|  | 293 | const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; | 
|  | 294 | u32 cfg; | 
|  | 295 |  | 
|  | 296 | if (use_msr) | 
|  | 297 | printk(KERN_ERR DRV_NAME ": Using MSR regs instead of PCI\n"); | 
|  | 298 |  | 
|  | 299 | cs5536_read(dev, CFG, &cfg); | 
|  | 300 |  | 
|  | 301 | if ((cfg & IDE_CFG_CHANEN) == 0) { | 
|  | 302 | printk(KERN_ERR DRV_NAME ": disabled by BIOS\n"); | 
|  | 303 | return -ENODEV; | 
|  | 304 | } | 
|  | 305 |  | 
|  | 306 | return ata_pci_init_one(dev, ppi); | 
|  | 307 | } | 
|  | 308 |  | 
|  | 309 | static const struct pci_device_id cs5536[] = { | 
|  | 310 | { PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_CS5536_IDE), }, | 
|  | 311 | { }, | 
|  | 312 | }; | 
|  | 313 |  | 
|  | 314 | static struct pci_driver cs5536_pci_driver = { | 
|  | 315 | .name		= DRV_NAME, | 
|  | 316 | .id_table	= cs5536, | 
|  | 317 | .probe		= cs5536_init_one, | 
|  | 318 | .remove		= ata_pci_remove_one, | 
|  | 319 | #ifdef CONFIG_PM | 
|  | 320 | .suspend	= ata_pci_device_suspend, | 
|  | 321 | .resume		= ata_pci_device_resume, | 
|  | 322 | #endif | 
|  | 323 | }; | 
|  | 324 |  | 
|  | 325 | static int __init cs5536_init(void) | 
|  | 326 | { | 
|  | 327 | return pci_register_driver(&cs5536_pci_driver); | 
|  | 328 | } | 
|  | 329 |  | 
|  | 330 | static void __exit cs5536_exit(void) | 
|  | 331 | { | 
|  | 332 | pci_unregister_driver(&cs5536_pci_driver); | 
|  | 333 | } | 
|  | 334 |  | 
|  | 335 | MODULE_AUTHOR("Martin K. Petersen"); | 
|  | 336 | MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller"); | 
|  | 337 | MODULE_LICENSE("GPL"); | 
|  | 338 | MODULE_DEVICE_TABLE(pci, cs5536); | 
|  | 339 | MODULE_VERSION(DRV_VERSION); | 
|  | 340 | module_param_named(msr, use_msr, int, 0644); | 
|  | 341 | MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)"); | 
|  | 342 |  | 
|  | 343 | module_init(cs5536_init); | 
|  | 344 | module_exit(cs5536_exit); |