| Harald Welte | 77c44ab | 2005-11-13 16:06:26 -0800 | [diff] [blame] | 1 | #ifndef _CM4040_H_ |
| 2 | #define _CM4040_H_ |
| 3 | |
| 4 | #define CM_MAX_DEV 4 |
| 5 | |
| 6 | #define DEVICE_NAME "cmx" |
| 7 | #define MODULE_NAME "cm4040_cs" |
| 8 | |
| 9 | #define REG_OFFSET_BULK_OUT 0 |
| 10 | #define REG_OFFSET_BULK_IN 0 |
| 11 | #define REG_OFFSET_BUFFER_STATUS 1 |
| 12 | #define REG_OFFSET_SYNC_CONTROL 2 |
| 13 | |
| 14 | #define BSR_BULK_IN_FULL 0x02 |
| 15 | #define BSR_BULK_OUT_FULL 0x01 |
| 16 | |
| 17 | #define SCR_HOST_TO_READER_START 0x80 |
| 18 | #define SCR_ABORT 0x40 |
| 19 | #define SCR_EN_NOTIFY 0x20 |
| 20 | #define SCR_ACK_NOTIFY 0x10 |
| 21 | #define SCR_READER_TO_HOST_DONE 0x08 |
| 22 | #define SCR_HOST_TO_READER_DONE 0x04 |
| 23 | #define SCR_PULSE_INTERRUPT 0x02 |
| 24 | #define SCR_POWER_DOWN 0x01 |
| 25 | |
| 26 | |
| 27 | #define CMD_PC_TO_RDR_ICCPOWERON 0x62 |
| 28 | #define CMD_PC_TO_RDR_GETSLOTSTATUS 0x65 |
| 29 | #define CMD_PC_TO_RDR_ICCPOWEROFF 0x63 |
| 30 | #define CMD_PC_TO_RDR_SECURE 0x69 |
| 31 | #define CMD_PC_TO_RDR_GETPARAMETERS 0x6C |
| 32 | #define CMD_PC_TO_RDR_RESETPARAMETERS 0x6D |
| 33 | #define CMD_PC_TO_RDR_SETPARAMETERS 0x61 |
| 34 | #define CMD_PC_TO_RDR_XFRBLOCK 0x6F |
| 35 | #define CMD_PC_TO_RDR_ESCAPE 0x6B |
| 36 | #define CMD_PC_TO_RDR_ICCCLOCK 0x6E |
| 37 | #define CMD_PC_TO_RDR_TEST_SECURE 0x74 |
| 38 | #define CMD_PC_TO_RDR_OK_SECURE 0x89 |
| 39 | |
| 40 | |
| 41 | #define CMD_RDR_TO_PC_SLOTSTATUS 0x81 |
| 42 | #define CMD_RDR_TO_PC_DATABLOCK 0x80 |
| 43 | #define CMD_RDR_TO_PC_PARAMETERS 0x82 |
| 44 | #define CMD_RDR_TO_PC_ESCAPE 0x83 |
| 45 | #define CMD_RDR_TO_PC_OK_SECURE 0x89 |
| 46 | |
| 47 | #endif /* _CM4040_H_ */ |