| Ivo van Doorn | 95ea362 | 2007-09-25 17:57:13 -0700 | [diff] [blame] | 1 | config RT2X00 |
| 2 | tristate "Ralink driver support" |
| 3 | depends on MAC80211 && WLAN_80211 && EXPERIMENTAL |
| 4 | ---help--- |
| 5 | This will enable the experimental support for the Ralink drivers, |
| 6 | developed in the rt2x00 project <http://rt2x00.serialmonkey.com>. |
| 7 | |
| 8 | These drivers will make use of the Devicescape ieee80211 stack. |
| 9 | |
| 10 | When building one of the individual drivers, the rt2x00 library |
| 11 | will also be created. That library (when the driver is built as |
| 12 | a module) will be called "rt2x00lib.ko". |
| 13 | |
| 14 | config RT2X00_LIB |
| 15 | tristate |
| 16 | depends on RT2X00 |
| 17 | |
| 18 | config RT2X00_LIB_PCI |
| 19 | tristate |
| 20 | depends on RT2X00 |
| 21 | select RT2X00_LIB |
| 22 | |
| 23 | config RT2X00_LIB_USB |
| 24 | tristate |
| 25 | depends on RT2X00 |
| 26 | select RT2X00_LIB |
| 27 | |
| 28 | config RT2X00_LIB_FIRMWARE |
| 29 | boolean |
| 30 | depends on RT2X00_LIB |
| 31 | select CRC_ITU_T |
| 32 | select FW_LOADER |
| 33 | |
| 34 | config RT2X00_LIB_RFKILL |
| 35 | boolean |
| 36 | depends on RT2X00_LIB |
| 37 | select RFKILL |
| 38 | select INPUT_POLLDEV |
| 39 | |
| 40 | config RT2400PCI |
| 41 | tristate "Ralink rt2400 pci/pcmcia support" |
| 42 | depends on RT2X00 && PCI |
| 43 | select RT2X00_LIB_PCI |
| 44 | select EEPROM_93CX6 |
| 45 | ---help--- |
| 46 | This is an experimental driver for the Ralink rt2400 wireless chip. |
| 47 | |
| 48 | When compiled as a module, this driver will be called "rt2400pci.ko". |
| 49 | |
| 50 | config RT2400PCI_RFKILL |
| 51 | bool "RT2400 rfkill support" |
| 52 | depends on RT2400PCI |
| 53 | select RT2X00_LIB_RFKILL |
| 54 | ---help--- |
| 55 | This adds support for integrated rt2400 devices that feature a |
| 56 | hardware button to control the radio state. |
| 57 | This feature depends on the RF switch subsystem rfkill. |
| 58 | |
| 59 | config RT2500PCI |
| 60 | tristate "Ralink rt2500 pci/pcmcia support" |
| 61 | depends on RT2X00 && PCI |
| 62 | select RT2X00_LIB_PCI |
| 63 | select EEPROM_93CX6 |
| 64 | ---help--- |
| 65 | This is an experimental driver for the Ralink rt2500 wireless chip. |
| 66 | |
| 67 | When compiled as a module, this driver will be called "rt2500pci.ko". |
| 68 | |
| 69 | config RT2500PCI_RFKILL |
| 70 | bool "RT2500 rfkill support" |
| 71 | depends on RT2500PCI |
| 72 | select RT2X00_LIB_RFKILL |
| 73 | ---help--- |
| 74 | This adds support for integrated rt2500 devices that feature a |
| 75 | hardware button to control the radio state. |
| 76 | This feature depends on the RF switch subsystem rfkill. |
| 77 | |
| 78 | config RT61PCI |
| 79 | tristate "Ralink rt61 pci/pcmcia support" |
| 80 | depends on RT2X00 && PCI |
| 81 | select RT2X00_LIB_PCI |
| 82 | select RT2X00_LIB_FIRMWARE |
| 83 | select EEPROM_93CX6 |
| 84 | ---help--- |
| 85 | This is an experimental driver for the Ralink rt61 wireless chip. |
| 86 | |
| 87 | When compiled as a module, this driver will be called "rt61pci.ko". |
| 88 | |
| 89 | config RT61PCI_RFKILL |
| 90 | bool "RT61 rfkill support" |
| 91 | depends on RT61PCI |
| 92 | select RT2X00_LIB_RFKILL |
| 93 | ---help--- |
| 94 | This adds support for integrated rt61 devices that feature a |
| 95 | hardware button to control the radio state. |
| 96 | This feature depends on the RF switch subsystem rfkill. |
| 97 | |
| 98 | config RT2500USB |
| 99 | tristate "Ralink rt2500 usb support" |
| 100 | depends on RT2X00 && USB |
| 101 | select RT2X00_LIB_USB |
| 102 | ---help--- |
| 103 | This is an experimental driver for the Ralink rt2500 wireless chip. |
| 104 | |
| 105 | When compiled as a module, this driver will be called "rt2500usb.ko". |
| 106 | |
| 107 | config RT73USB |
| 108 | tristate "Ralink rt73 usb support" |
| 109 | depends on RT2X00 && USB |
| 110 | select RT2X00_LIB_USB |
| 111 | select RT2X00_LIB_FIRMWARE |
| 112 | ---help--- |
| 113 | This is an experimental driver for the Ralink rt73 wireless chip. |
| 114 | |
| 115 | When compiled as a module, this driver will be called "rt73usb.ko". |
| 116 | |
| 117 | config RT2X00_LIB_DEBUGFS |
| 118 | bool "Ralink debugfs support" |
| 119 | depends on RT2X00_LIB && MAC80211_DEBUGFS |
| 120 | ---help--- |
| 121 | Enable creation of debugfs files for the rt2x00 drivers. |
| 122 | These debugfs files support both reading and writing of the |
| 123 | most important register types of the rt2x00 devices. |
| 124 | |
| 125 | config RT2X00_DEBUG |
| 126 | bool "Ralink debug output" |
| 127 | depends on RT2X00_LIB |
| 128 | ---help--- |
| 129 | Enable debugging output for all rt2x00 modules |
| 130 | |