drivers/char/ftape/zftape/zftape-init.c

/*
 *      Copyright (C) 1996, 1997 Claus-Justus Heine.

 This program is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation; either version 2, or (at your option)
 any later version.

 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program; see the file COPYING.  If not, write to
 the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.

 *
 *      This file contains the code that registers the zftape frontend 
 *      to the ftape floppy tape driver for Linux
 */

#include <linux/config.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/major.h>
#include <linux/slab.h>
#ifdef CONFIG_KMOD
#include <linux/kmod.h>
#endif
#include <linux/fcntl.h>
#include <linux/smp_lock.h>
#include <linux/devfs_fs_kernel.h>

#include <linux/zftape.h>
#include <linux/init.h>
#include <linux/device.h>

#include "../zftape/zftape-init.h"
#include "../zftape/zftape-read.h"
#include "../zftape/zftape-write.h"
#include "../zftape/zftape-ctl.h"
#include "../zftape/zftape-buffers.h"

MODULE_AUTHOR("(c) 1996, 1997 Claus-Justus Heine "
	      "(claus@momo.math.rwth-aachen.de)");
MODULE_DESCRIPTION(ZFTAPE_VERSION " - "
		   "VFS interface for the Linux floppy tape driver. "
		   "Support for QIC-113 compatible volume table "
		   "and builtin compression (lzrw3 algorithm)");
MODULE_SUPPORTED_DEVICE("char-major-27");
MODULE_LICENSE("GPL");

/*      Global vars.
 */
struct zft_cmpr_ops *zft_cmpr_ops = NULL;
const ftape_info *zft_status;

/*      Local vars.
 */
static unsigned long busy_flag;

static sigset_t orig_sigmask;

/*  the interface to the kernel vfs layer
 */

/* Note about llseek():
 *
 * st.c and tpqic.c update fp->f_pos but don't implment llseek() and
 * initialize the llseek component of the file_ops struct with NULL.
 * This means that the user will get the default seek, but the tape
 * device will not respect the new position, but happily read from the
 * old position. Think a zftape specific llseek() function would be
 * better, returning -ESPIPE. TODO.
 */

static int  zft_open (struct inode *ino, struct file *filep);
static int zft_close(struct inode *ino, struct file *filep);
static int  zft_ioctl(struct inode *ino, struct file *filep,
		      unsigned int command, unsigned long arg);
static int  zft_mmap(struct file *filep, struct vm_area_struct *vma);
static ssize_t zft_read (struct file *fp, char __user *buff,
			 size_t req_len, loff_t *ppos);
static ssize_t zft_write(struct file *fp, const char __user *buff,
			 size_t req_len, loff_t *ppos);

static struct file_operations zft_cdev =
{
	.owner		= THIS_MODULE,
	.read		= zft_read,
	.write		= zft_write,
	.ioctl		= zft_ioctl,
	.mmap		= zft_mmap,
	.open		= zft_open,
	.release	= zft_close,
};

static struct class *zft_class;

/*      Open floppy tape device
 */
static int zft_open(struct inode *ino, struct file *filep)
{
	int result;
	TRACE_FUN(ft_t_flow);

	nonseekable_open(ino, filep);
	TRACE(ft_t_flow, "called for minor %d", iminor(ino));
	if ( test_and_set_bit(0,&busy_flag) ) {
		TRACE_ABORT(-EBUSY, ft_t_warn, "failed: already busy");
	}
	if ((iminor(ino) & ~(ZFT_MINOR_OP_MASK | FTAPE_NO_REWIND))
	     > 
	    FTAPE_SEL_D) {
		clear_bit(0,&busy_flag);
		TRACE_ABORT(-ENXIO, ft_t_err, "failed: invalid unit nr");
	}
	orig_sigmask = current->blocked;
	sigfillset(&current->blocked);
	result = _zft_open(iminor(ino), filep->f_flags & O_ACCMODE);
	if (result < 0) {
		current->blocked = orig_sigmask; /* restore mask */
		clear_bit(0,&busy_flag);
		TRACE_ABORT(result, ft_t_err, "_ftape_open failed");
	} else {
		/* Mask signals that will disturb proper operation of the
		 * program that is calling.
		 */
		current->blocked = orig_sigmask;
		sigaddsetmask (&current->blocked, _DO_BLOCK);
		TRACE_EXIT 0;
	}
}

/*      Close floppy tape device
 */
static int zft_close(struct inode *ino, struct file *filep)
{
	int result;
	TRACE_FUN(ft_t_flow);

	if ( !test_bit(0,&busy_flag) || iminor(ino) != zft_unit) {
		TRACE(ft_t_err, "failed: not busy or wrong unit");
		TRACE_EXIT 0;
	}
	sigfillset(&current->blocked);
	result = _zft_close();
	if (result < 0) {
		TRACE(ft_t_err, "_zft_close failed");
	}
	current->blocked = orig_sigmask; /* restore before open state */
	clear_bit(0,&busy_flag);
	TRACE_EXIT 0;
}

/*      Ioctl for floppy tape device
 */
static int zft_ioctl(struct inode *ino, struct file *filep,
		     unsigned int command, unsigned long arg)
{
	int result = -EIO;
	sigset_t old_sigmask;
	TRACE_FUN(ft_t_flow);

	if ( !test_bit(0,&busy_flag) || iminor(ino) != zft_unit || ft_failure) {
		TRACE_ABORT(-EIO, ft_t_err,
			    "failed: not busy, failure or wrong unit");
	}
	old_sigmask = current->blocked; /* save mask */
	sigfillset(&current->blocked);
	/* This will work as long as sizeof(void *) == sizeof(long) */
	result = _zft_ioctl(command, (void __user *) arg);
	current->blocked = old_sigmask; /* restore mask */
	TRACE_EXIT result;
}

/*      Ioctl for floppy tape device
 */
static int  zft_mmap(struct file *filep, struct vm_area_struct *vma)
{
	int result = -EIO;
	sigset_t old_sigmask;
	TRACE_FUN(ft_t_flow);

	if ( !test_bit(0,&busy_flag) || 
	    iminor(filep->f_dentry->d_inode) != zft_unit || 
	    ft_failure)
	{
		TRACE_ABORT(-EIO, ft_t_err,
			    "failed: not busy, failure or wrong unit");
	}
	old_sigmask = current->blocked; /* save mask */
	sigfillset(&current->blocked);
	if ((result = ftape_mmap(vma)) >= 0) {
#ifndef MSYNC_BUG_WAS_FIXED
		static struct vm_operations_struct dummy = { NULL, };
		vma->vm_ops = &dummy;
#endif
	}
	current->blocked = old_sigmask; /* restore mask */
	TRACE_EXIT result;
}

/*      Read from floppy tape device
 */
static ssize_t zft_read(struct file *fp, char __user *buff,
			size_t req_len, loff_t *ppos)
{
	int result = -EIO;
	sigset_t old_sigmask;
	struct inode *ino = fp->f_dentry->d_inode;
	TRACE_FUN(ft_t_flow);

	TRACE(ft_t_data_flow, "called with count: %ld", (unsigned long)req_len);
	if (!test_bit(0,&busy_flag)  || iminor(ino) != zft_unit || ft_failure) {
		TRACE_ABORT(-EIO, ft_t_err,
			    "failed: not busy, failure or wrong unit");
	}
	old_sigmask = current->blocked; /* save mask */
	sigfillset(&current->blocked);
	result = _zft_read(buff, req_len);
	current->blocked = old_sigmask; /* restore mask */
	TRACE(ft_t_data_flow, "return with count: %d", result);
	TRACE_EXIT result;
}

/*      Write to tape device
 */
static ssize_t zft_write(struct file *fp, const char __user *buff,
			 size_t req_len, loff_t *ppos)
{
	int result = -EIO;
	sigset_t old_sigmask;
	struct inode *ino = fp->f_dentry->d_inode;
	TRACE_FUN(ft_t_flow);

	TRACE(ft_t_flow, "called with count: %ld", (unsigned long)req_len);
	if (!test_bit(0,&busy_flag) || iminor(ino) != zft_unit || ft_failure) {
		TRACE_ABORT(-EIO, ft_t_err,
			    "failed: not busy, failure or wrong unit");
	}
	old_sigmask = current->blocked; /* save mask */
	sigfillset(&current->blocked);
	result = _zft_write(buff, req_len);
	current->blocked = old_sigmask; /* restore mask */
	TRACE(ft_t_data_flow, "return with count: %d", result);
	TRACE_EXIT result;
}

/*                    END OF VFS INTERFACE 
 *          
 *****************************************************************************/

/*  driver/module initialization
 */

/*  the compression module has to call this function to hook into the zftape 
 *  code
 */
int zft_cmpr_register(struct zft_cmpr_ops *new_ops)
{
	TRACE_FUN(ft_t_flow);
	
	if (zft_cmpr_ops != NULL) {
		TRACE_EXIT -EBUSY;
	} else {
		zft_cmpr_ops = new_ops;
		TRACE_EXIT 0;
	}
}

/*  lock the zft-compressor() module.
 */
int zft_cmpr_lock(int try_to_load)
{
	if (zft_cmpr_ops == NULL) {
#ifdef CONFIG_KMOD
		if (try_to_load) {
			request_module("zft-compressor");
			if (zft_cmpr_ops == NULL) {
				return -ENOSYS;
			}
		} else {
			return -ENOSYS;
		}
#else
		return -ENOSYS;
#endif
	}
	(*zft_cmpr_ops->lock)();
	return 0;
}

#ifdef CONFIG_ZFT_COMPRESSOR
extern int zft_compressor_init(void);
#endif

/*  Called by modules package when installing the driver or by kernel
 *  during the initialization phase
 */
int __init zft_init(void)
{
	int i;
	TRACE_FUN(ft_t_flow);

#ifdef MODULE
	printk(KERN_INFO ZFTAPE_VERSION "\n");
        if (TRACE_LEVEL >= ft_t_info) {
		printk(
KERN_INFO
"(c) 1996, 1997 Claus-Justus Heine (claus@momo.math.rwth-aachen.de)\n"
KERN_INFO
"vfs interface for ftape floppy tape driver.\n"
KERN_INFO
"Support for QIC-113 compatible volume table, dynamic memory allocation\n"
KERN_INFO
"and builtin compression (lzrw3 algorithm).\n");
        }
#else /* !MODULE */
	/* print a short no-nonsense boot message */
	printk(KERN_INFO ZFTAPE_VERSION "\n");
#endif /* MODULE */
	TRACE(ft_t_info, "zft_init @ 0x%p", zft_init);
	TRACE(ft_t_info,
	      "installing zftape VFS interface for ftape driver ...");
	TRACE_CATCH(register_chrdev(QIC117_TAPE_MAJOR, "zft", &zft_cdev),);

	zft_class = class_create(THIS_MODULE, "zft");
	for (i = 0; i < 4; i++) {
		class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i), NULL, "qft%i", i);
		devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i),
				S_IFCHR | S_IRUSR | S_IWUSR,
				"qft%i", i);
		class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 4), NULL, "nqft%i", i);
		devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 4),
				S_IFCHR | S_IRUSR | S_IWUSR,
				"nqft%i", i);
		class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 16), NULL, "zqft%i", i);
		devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 16),
				S_IFCHR | S_IRUSR | S_IWUSR,
				"zqft%i", i);
		class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 20), NULL, "nzqft%i", i);
		devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 20),
				S_IFCHR | S_IRUSR | S_IWUSR,
				"nzqft%i", i);
		class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 32), NULL, "rawqft%i", i);
		devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 32),
				S_IFCHR | S_IRUSR | S_IWUSR,
				"rawqft%i", i);
		class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 36), NULL, "nrawrawqft%i", i);
		devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 36),
				S_IFCHR | S_IRUSR | S_IWUSR,
				"nrawqft%i", i);
	}

#ifdef CONFIG_ZFT_COMPRESSOR
	(void)zft_compressor_init();
#endif
	zft_status = ftape_get_status(); /*  fetch global data of ftape 
					  *  hardware driver 
					  */
	TRACE_EXIT 0;
}


/* Called by modules package when removing the driver 
 */
static void zft_exit(void)
{
	int i;
	TRACE_FUN(ft_t_flow);

	if (unregister_chrdev(QIC117_TAPE_MAJOR, "zft") != 0) {
		TRACE(ft_t_warn, "failed");
	} else {
		TRACE(ft_t_info, "successful");
	}
        for (i = 0; i < 4; i++) {
		devfs_remove("qft%i", i);
		class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i));
		devfs_remove("nqft%i", i);
		class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 4));
		devfs_remove("zqft%i", i);
		class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 16));
		devfs_remove("nzqft%i", i);
		class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 20));
		devfs_remove("rawqft%i", i);
		class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 32));
		devfs_remove("nrawqft%i", i);
		class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 36));
	}
	class_destroy(zft_class);
	zft_uninit_mem(); /* release remaining memory, if any */
        printk(KERN_INFO "zftape successfully unloaded.\n");
	TRACE_EXIT;
}

module_init(zft_init);
module_exit(zft_exit);