| Paul Mundt | 4466b20 | 2008-12-12 16:34:44 +0900 | [diff] [blame] | 1 | /* Cloned and hacked for uClibc by Paul Mundt, December 2003 */ | 
|  | 2 | /* Modified by SuperH, Inc. September 2003 */ | 
|  | 3 | ! | 
|  | 4 | ! Fast SH memcpy | 
|  | 5 | ! | 
|  | 6 | ! by Toshiyasu Morita (tm@netcom.com) | 
|  | 7 | ! hacked by J"orn Rernnecke (joern.rennecke@superh.com) ("o for o-umlaut) | 
|  | 8 | ! SH5 code Copyright 2002 SuperH Ltd. | 
|  | 9 | ! | 
|  | 10 | ! Entry: ARG0: destination pointer | 
|  | 11 | !        ARG1: source pointer | 
|  | 12 | !        ARG2: byte count | 
|  | 13 | ! | 
|  | 14 | ! Exit:  RESULT: destination pointer | 
|  | 15 | !        any other registers in the range r0-r7: trashed | 
|  | 16 | ! | 
|  | 17 | ! Notes: Usually one wants to do small reads and write a longword, but | 
|  | 18 | !        unfortunately it is difficult in some cases to concatanate bytes | 
|  | 19 | !        into a longword on the SH, so this does a longword read and small | 
|  | 20 | !        writes. | 
|  | 21 | ! | 
|  | 22 | ! This implementation makes two assumptions about how it is called: | 
|  | 23 | ! | 
|  | 24 | ! 1.: If the byte count is nonzero, the address of the last byte to be | 
|  | 25 | !     copied is unsigned greater than the address of the first byte to | 
|  | 26 | !     be copied.  This could be easily swapped for a signed comparison, | 
|  | 27 | !     but the algorithm used needs some comparison. | 
|  | 28 | ! | 
|  | 29 | ! 2.: When there are two or three bytes in the last word of an 11-or-more | 
|  | 30 | !     bytes memory chunk to b copied, the rest of the word can be read | 
|  | 31 | !     without side effects. | 
|  | 32 | !     This could be easily changed by increasing the minumum size of | 
|  | 33 | !     a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2, | 
|  | 34 | !     however, this would cost a few extra cyles on average. | 
|  | 35 | !     For SHmedia, the assumption is that any quadword can be read in its | 
|  | 36 | !     enirety if at least one byte is included in the copy. | 
|  | 37 | ! | 
|  | 38 |  | 
|  | 39 | .section .text..SHmedia32,"ax" | 
|  | 40 | .globl	memcpy | 
|  | 41 | .type	memcpy, @function | 
|  | 42 | .align	5 | 
|  | 43 |  | 
|  | 44 | memcpy: | 
|  | 45 |  | 
|  | 46 | #define LDUAQ(P,O,D0,D1) ldlo.q P,O,D0; ldhi.q P,O+7,D1 | 
|  | 47 | #define STUAQ(P,O,D0,D1) stlo.q P,O,D0; sthi.q P,O+7,D1 | 
|  | 48 | #define LDUAL(P,O,D0,D1) ldlo.l P,O,D0; ldhi.l P,O+3,D1 | 
|  | 49 | #define STUAL(P,O,D0,D1) stlo.l P,O,D0; sthi.l P,O+3,D1 | 
|  | 50 |  | 
|  | 51 | ld.b r3,0,r63 | 
|  | 52 | pta/l Large,tr0 | 
|  | 53 | movi 25,r0 | 
|  | 54 | bgeu/u r4,r0,tr0 | 
|  | 55 | nsb r4,r0 | 
|  | 56 | shlli r0,5,r0 | 
|  | 57 | movi (L1-L0+63*32 + 1) & 0xffff,r1 | 
|  | 58 | sub r1, r0, r0 | 
|  | 59 | L0:	ptrel r0,tr0 | 
|  | 60 | add r2,r4,r5 | 
|  | 61 | ptabs r18,tr1 | 
|  | 62 | add r3,r4,r6 | 
|  | 63 | blink tr0,r63 | 
|  | 64 |  | 
|  | 65 | /* Rearranged to make cut2 safe */ | 
|  | 66 | .balign 8 | 
|  | 67 | L4_7:	/* 4..7 byte memcpy cntd. */ | 
|  | 68 | stlo.l r2, 0, r0 | 
|  | 69 | or r6, r7, r6 | 
|  | 70 | sthi.l r5, -1, r6 | 
|  | 71 | stlo.l r5, -4, r6 | 
|  | 72 | blink tr1,r63 | 
|  | 73 |  | 
|  | 74 | .balign 8 | 
|  | 75 | L1:	/* 0 byte memcpy */ | 
|  | 76 | nop | 
|  | 77 | blink tr1,r63 | 
|  | 78 | nop | 
|  | 79 | nop | 
|  | 80 | nop | 
|  | 81 | nop | 
|  | 82 |  | 
|  | 83 | L2_3:	/* 2 or 3 byte memcpy cntd. */ | 
|  | 84 | st.b r5,-1,r6 | 
|  | 85 | blink tr1,r63 | 
|  | 86 |  | 
|  | 87 | /* 1 byte memcpy */ | 
|  | 88 | ld.b r3,0,r0 | 
|  | 89 | st.b r2,0,r0 | 
|  | 90 | blink tr1,r63 | 
|  | 91 |  | 
|  | 92 | L8_15:	/* 8..15 byte memcpy cntd. */ | 
|  | 93 | stlo.q r2, 0, r0 | 
|  | 94 | or r6, r7, r6 | 
|  | 95 | sthi.q r5, -1, r6 | 
|  | 96 | stlo.q r5, -8, r6 | 
|  | 97 | blink tr1,r63 | 
|  | 98 |  | 
|  | 99 | /* 2 or 3 byte memcpy */ | 
|  | 100 | ld.b r3,0,r0 | 
|  | 101 | ld.b r2,0,r63 | 
|  | 102 | ld.b r3,1,r1 | 
|  | 103 | st.b r2,0,r0 | 
|  | 104 | pta/l L2_3,tr0 | 
|  | 105 | ld.b r6,-1,r6 | 
|  | 106 | st.b r2,1,r1 | 
|  | 107 | blink tr0, r63 | 
|  | 108 |  | 
|  | 109 | /* 4 .. 7 byte memcpy */ | 
|  | 110 | LDUAL (r3, 0, r0, r1) | 
|  | 111 | pta L4_7, tr0 | 
|  | 112 | ldlo.l r6, -4, r7 | 
|  | 113 | or r0, r1, r0 | 
|  | 114 | sthi.l r2, 3, r0 | 
|  | 115 | ldhi.l r6, -1, r6 | 
|  | 116 | blink tr0, r63 | 
|  | 117 |  | 
|  | 118 | /* 8 .. 15 byte memcpy */ | 
|  | 119 | LDUAQ (r3, 0, r0, r1) | 
|  | 120 | pta L8_15, tr0 | 
|  | 121 | ldlo.q r6, -8, r7 | 
|  | 122 | or r0, r1, r0 | 
|  | 123 | sthi.q r2, 7, r0 | 
|  | 124 | ldhi.q r6, -1, r6 | 
|  | 125 | blink tr0, r63 | 
|  | 126 |  | 
|  | 127 | /* 16 .. 24 byte memcpy */ | 
|  | 128 | LDUAQ (r3, 0, r0, r1) | 
|  | 129 | LDUAQ (r3, 8, r8, r9) | 
|  | 130 | or r0, r1, r0 | 
|  | 131 | sthi.q r2, 7, r0 | 
|  | 132 | or r8, r9, r8 | 
|  | 133 | sthi.q r2, 15, r8 | 
|  | 134 | ldlo.q r6, -8, r7 | 
|  | 135 | ldhi.q r6, -1, r6 | 
|  | 136 | stlo.q r2, 8, r8 | 
|  | 137 | stlo.q r2, 0, r0 | 
|  | 138 | or r6, r7, r6 | 
|  | 139 | sthi.q r5, -1, r6 | 
|  | 140 | stlo.q r5, -8, r6 | 
|  | 141 | blink tr1,r63 | 
|  | 142 |  | 
|  | 143 | Large: | 
|  | 144 | ld.b r2, 0, r63 | 
|  | 145 | pta/l  Loop_ua, tr1 | 
|  | 146 | ori r3, -8, r7 | 
|  | 147 | sub r2, r7, r22 | 
|  | 148 | sub r3, r2, r6 | 
|  | 149 | add r2, r4, r5 | 
|  | 150 | ldlo.q r3, 0, r0 | 
|  | 151 | addi r5, -16, r5 | 
|  | 152 | movi 64+8, r27 // could subtract r7 from that. | 
|  | 153 | stlo.q r2, 0, r0 | 
|  | 154 | sthi.q r2, 7, r0 | 
|  | 155 | ldx.q r22, r6, r0 | 
|  | 156 | bgtu/l r27, r4, tr1 | 
|  | 157 |  | 
|  | 158 | addi r5, -48, r27 | 
|  | 159 | pta/l Loop_line, tr0 | 
|  | 160 | addi r6, 64, r36 | 
|  | 161 | addi r6, -24, r19 | 
|  | 162 | addi r6, -16, r20 | 
|  | 163 | addi r6, -8, r21 | 
|  | 164 |  | 
|  | 165 | Loop_line: | 
|  | 166 | ldx.q r22, r36, r63 | 
|  | 167 | alloco r22, 32 | 
|  | 168 | addi r22, 32, r22 | 
|  | 169 | ldx.q r22, r19, r23 | 
|  | 170 | sthi.q r22, -25, r0 | 
|  | 171 | ldx.q r22, r20, r24 | 
|  | 172 | ldx.q r22, r21, r25 | 
|  | 173 | stlo.q r22, -32, r0 | 
|  | 174 | ldx.q r22, r6,  r0 | 
|  | 175 | sthi.q r22, -17, r23 | 
|  | 176 | sthi.q r22,  -9, r24 | 
|  | 177 | sthi.q r22,  -1, r25 | 
|  | 178 | stlo.q r22, -24, r23 | 
|  | 179 | stlo.q r22, -16, r24 | 
|  | 180 | stlo.q r22,  -8, r25 | 
|  | 181 | bgeu r27, r22, tr0 | 
|  | 182 |  | 
|  | 183 | Loop_ua: | 
|  | 184 | addi r22, 8, r22 | 
|  | 185 | sthi.q r22, -1, r0 | 
|  | 186 | stlo.q r22, -8, r0 | 
|  | 187 | ldx.q r22, r6, r0 | 
|  | 188 | bgtu/l r5, r22, tr1 | 
|  | 189 |  | 
|  | 190 | add r3, r4, r7 | 
|  | 191 | ldlo.q r7, -8, r1 | 
|  | 192 | sthi.q r22, 7, r0 | 
|  | 193 | ldhi.q r7, -1, r7 | 
|  | 194 | ptabs r18,tr1 | 
|  | 195 | stlo.q r22, 0, r0 | 
|  | 196 | or r1, r7, r1 | 
|  | 197 | sthi.q r5, 15, r1 | 
|  | 198 | stlo.q r5, 8, r1 | 
|  | 199 | blink tr1, r63 | 
|  | 200 |  | 
|  | 201 | .size memcpy,.-memcpy |