| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 1 | /* | 
 | 2 |  * LP5521 LED chip driver. | 
 | 3 |  * | 
 | 4 |  * Copyright (C) 2010 Nokia Corporation | 
 | 5 |  * | 
 | 6 |  * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> | 
 | 7 |  * | 
 | 8 |  * This program is free software; you can redistribute it and/or | 
 | 9 |  * modify it under the terms of the GNU General Public License | 
 | 10 |  * version 2 as published by the Free Software Foundation. | 
 | 11 |  * | 
 | 12 |  * This program is distributed in the hope that it will be useful, but | 
 | 13 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 | 14 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU | 
 | 15 |  * General Public License for more details. | 
 | 16 |  * | 
 | 17 |  * You should have received a copy of the GNU General Public License | 
 | 18 |  * along with this program; if not, write to the Free Software | 
 | 19 |  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
 | 20 |  * 02110-1301 USA | 
 | 21 |  */ | 
 | 22 |  | 
 | 23 | #include <linux/module.h> | 
 | 24 | #include <linux/init.h> | 
 | 25 | #include <linux/i2c.h> | 
 | 26 | #include <linux/mutex.h> | 
 | 27 | #include <linux/gpio.h> | 
 | 28 | #include <linux/interrupt.h> | 
 | 29 | #include <linux/delay.h> | 
 | 30 | #include <linux/ctype.h> | 
 | 31 | #include <linux/spinlock.h> | 
 | 32 | #include <linux/wait.h> | 
 | 33 | #include <linux/leds.h> | 
 | 34 | #include <linux/leds-lp5521.h> | 
 | 35 | #include <linux/workqueue.h> | 
 | 36 | #include <linux/slab.h> | 
 | 37 |  | 
 | 38 | #define LP5521_PROGRAM_LENGTH		32	/* in bytes */ | 
 | 39 |  | 
 | 40 | #define LP5521_MAX_LEDS			3	/* Maximum number of LEDs */ | 
 | 41 | #define LP5521_MAX_ENGINES		3	/* Maximum number of engines */ | 
 | 42 |  | 
 | 43 | #define LP5521_ENG_MASK_BASE		0x30	/* 00110000 */ | 
 | 44 | #define LP5521_ENG_STATUS_MASK		0x07	/* 00000111 */ | 
 | 45 |  | 
 | 46 | #define LP5521_CMD_LOAD			0x15	/* 00010101 */ | 
 | 47 | #define LP5521_CMD_RUN			0x2a	/* 00101010 */ | 
 | 48 | #define LP5521_CMD_DIRECT		0x3f	/* 00111111 */ | 
 | 49 | #define LP5521_CMD_DISABLED		0x00	/* 00000000 */ | 
 | 50 |  | 
 | 51 | /* Registers */ | 
 | 52 | #define LP5521_REG_ENABLE		0x00 | 
 | 53 | #define LP5521_REG_OP_MODE		0x01 | 
 | 54 | #define LP5521_REG_R_PWM		0x02 | 
 | 55 | #define LP5521_REG_G_PWM		0x03 | 
 | 56 | #define LP5521_REG_B_PWM		0x04 | 
 | 57 | #define LP5521_REG_R_CURRENT		0x05 | 
 | 58 | #define LP5521_REG_G_CURRENT		0x06 | 
 | 59 | #define LP5521_REG_B_CURRENT		0x07 | 
 | 60 | #define LP5521_REG_CONFIG		0x08 | 
 | 61 | #define LP5521_REG_R_CHANNEL_PC		0x09 | 
 | 62 | #define LP5521_REG_G_CHANNEL_PC		0x0A | 
 | 63 | #define LP5521_REG_B_CHANNEL_PC		0x0B | 
 | 64 | #define LP5521_REG_STATUS		0x0C | 
 | 65 | #define LP5521_REG_RESET		0x0D | 
 | 66 | #define LP5521_REG_GPO			0x0E | 
 | 67 | #define LP5521_REG_R_PROG_MEM		0x10 | 
 | 68 | #define LP5521_REG_G_PROG_MEM		0x30 | 
 | 69 | #define LP5521_REG_B_PROG_MEM		0x50 | 
 | 70 |  | 
 | 71 | #define LP5521_PROG_MEM_BASE		LP5521_REG_R_PROG_MEM | 
 | 72 | #define LP5521_PROG_MEM_SIZE		0x20 | 
 | 73 |  | 
 | 74 | /* Base register to set LED current */ | 
 | 75 | #define LP5521_REG_LED_CURRENT_BASE	LP5521_REG_R_CURRENT | 
 | 76 |  | 
 | 77 | /* Base register to set the brightness */ | 
 | 78 | #define LP5521_REG_LED_PWM_BASE		LP5521_REG_R_PWM | 
 | 79 |  | 
 | 80 | /* Bits in ENABLE register */ | 
 | 81 | #define LP5521_MASTER_ENABLE		0x40	/* Chip master enable */ | 
 | 82 | #define LP5521_LOGARITHMIC_PWM		0x80	/* Logarithmic PWM adjustment */ | 
 | 83 | #define LP5521_EXEC_RUN			0x2A | 
 | 84 |  | 
 | 85 | /* Bits in CONFIG register */ | 
 | 86 | #define LP5521_PWM_HF			0x40	/* PWM: 0 = 256Hz, 1 = 558Hz */ | 
 | 87 | #define LP5521_PWRSAVE_EN		0x20	/* 1 = Power save mode */ | 
 | 88 | #define LP5521_CP_MODE_OFF		0	/* Charge pump (CP) off */ | 
 | 89 | #define LP5521_CP_MODE_BYPASS		8	/* CP forced to bypass mode */ | 
 | 90 | #define LP5521_CP_MODE_1X5		0x10	/* CP forced to 1.5x mode */ | 
 | 91 | #define LP5521_CP_MODE_AUTO		0x18	/* Automatic mode selection */ | 
 | 92 | #define LP5521_R_TO_BATT		4	/* R out: 0 = CP, 1 = Vbat */ | 
 | 93 | #define LP5521_CLK_SRC_EXT		0	/* Ext-clk source (CLK_32K) */ | 
 | 94 | #define LP5521_CLK_INT			1	/* Internal clock */ | 
 | 95 | #define LP5521_CLK_AUTO			2	/* Automatic clock selection */ | 
 | 96 |  | 
 | 97 | /* Status */ | 
 | 98 | #define LP5521_EXT_CLK_USED		0x08 | 
 | 99 |  | 
 | 100 | struct lp5521_engine { | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 101 | 	int		id; | 
 | 102 | 	u8		mode; | 
 | 103 | 	u8		prog_page; | 
 | 104 | 	u8		engine_mask; | 
 | 105 | }; | 
 | 106 |  | 
 | 107 | struct lp5521_led { | 
 | 108 | 	int			id; | 
 | 109 | 	u8			chan_nr; | 
 | 110 | 	u8			led_current; | 
 | 111 | 	u8			max_current; | 
 | 112 | 	struct led_classdev	cdev; | 
 | 113 | 	struct work_struct	brightness_work; | 
 | 114 | 	u8			brightness; | 
 | 115 | }; | 
 | 116 |  | 
 | 117 | struct lp5521_chip { | 
 | 118 | 	struct lp5521_platform_data *pdata; | 
 | 119 | 	struct mutex		lock; /* Serialize control */ | 
 | 120 | 	struct i2c_client	*client; | 
 | 121 | 	struct lp5521_engine	engines[LP5521_MAX_ENGINES]; | 
 | 122 | 	struct lp5521_led	leds[LP5521_MAX_LEDS]; | 
 | 123 | 	u8			num_channels; | 
 | 124 | 	u8			num_leds; | 
 | 125 | }; | 
 | 126 |  | 
| Samu Onkalo | 9fdb18b | 2010-11-24 12:57:02 -0800 | [diff] [blame] | 127 | static inline struct lp5521_led *cdev_to_led(struct led_classdev *cdev) | 
 | 128 | { | 
 | 129 | 	return container_of(cdev, struct lp5521_led, cdev); | 
 | 130 | } | 
 | 131 |  | 
 | 132 | static inline struct lp5521_chip *engine_to_lp5521(struct lp5521_engine *engine) | 
 | 133 | { | 
 | 134 | 	return container_of(engine, struct lp5521_chip, | 
 | 135 | 			    engines[engine->id - 1]); | 
 | 136 | } | 
 | 137 |  | 
 | 138 | static inline struct lp5521_chip *led_to_lp5521(struct lp5521_led *led) | 
 | 139 | { | 
 | 140 | 	return container_of(led, struct lp5521_chip, | 
 | 141 | 			    leds[led->id]); | 
 | 142 | } | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 143 |  | 
 | 144 | static void lp5521_led_brightness_work(struct work_struct *work); | 
 | 145 |  | 
 | 146 | static inline int lp5521_write(struct i2c_client *client, u8 reg, u8 value) | 
 | 147 | { | 
 | 148 | 	return i2c_smbus_write_byte_data(client, reg, value); | 
 | 149 | } | 
 | 150 |  | 
 | 151 | static int lp5521_read(struct i2c_client *client, u8 reg, u8 *buf) | 
 | 152 | { | 
 | 153 | 	s32 ret; | 
 | 154 |  | 
 | 155 | 	ret = i2c_smbus_read_byte_data(client, reg); | 
 | 156 | 	if (ret < 0) | 
 | 157 | 		return -EIO; | 
 | 158 |  | 
 | 159 | 	*buf = ret; | 
 | 160 | 	return 0; | 
 | 161 | } | 
 | 162 |  | 
 | 163 | static int lp5521_set_engine_mode(struct lp5521_engine *engine, u8 mode) | 
 | 164 | { | 
 | 165 | 	struct lp5521_chip *chip = engine_to_lp5521(engine); | 
 | 166 | 	struct i2c_client *client = chip->client; | 
 | 167 | 	int ret; | 
 | 168 | 	u8 engine_state; | 
 | 169 |  | 
 | 170 | 	/* Only transition between RUN and DIRECT mode are handled here */ | 
 | 171 | 	if (mode == LP5521_CMD_LOAD) | 
 | 172 | 		return 0; | 
 | 173 |  | 
 | 174 | 	if (mode == LP5521_CMD_DISABLED) | 
 | 175 | 		mode = LP5521_CMD_DIRECT; | 
 | 176 |  | 
 | 177 | 	ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state); | 
 | 178 |  | 
 | 179 | 	/* set mode only for this engine */ | 
 | 180 | 	engine_state &= ~(engine->engine_mask); | 
 | 181 | 	mode &= engine->engine_mask; | 
 | 182 | 	engine_state |= mode; | 
 | 183 | 	ret |= lp5521_write(client, LP5521_REG_OP_MODE, engine_state); | 
 | 184 |  | 
 | 185 | 	return ret; | 
 | 186 | } | 
 | 187 |  | 
 | 188 | static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern) | 
 | 189 | { | 
 | 190 | 	struct lp5521_chip *chip = engine_to_lp5521(eng); | 
 | 191 | 	struct i2c_client *client = chip->client; | 
 | 192 | 	int ret; | 
 | 193 | 	int addr; | 
 | 194 | 	u8 mode; | 
 | 195 |  | 
 | 196 | 	/* move current engine to direct mode and remember the state */ | 
 | 197 | 	ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT); | 
| Samu Onkalo | 09c76b0 | 2010-11-24 12:57:03 -0800 | [diff] [blame] | 198 | 	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */ | 
 | 199 | 	usleep_range(1000, 2000); | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 200 | 	ret |= lp5521_read(client, LP5521_REG_OP_MODE, &mode); | 
 | 201 |  | 
 | 202 | 	/* For loading, all the engines to load mode */ | 
 | 203 | 	lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); | 
| Samu Onkalo | 09c76b0 | 2010-11-24 12:57:03 -0800 | [diff] [blame] | 204 | 	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */ | 
 | 205 | 	usleep_range(1000, 2000); | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 206 | 	lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD); | 
| Samu Onkalo | 09c76b0 | 2010-11-24 12:57:03 -0800 | [diff] [blame] | 207 | 	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */ | 
 | 208 | 	usleep_range(1000, 2000); | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 209 |  | 
 | 210 | 	addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE; | 
 | 211 | 	i2c_smbus_write_i2c_block_data(client, | 
 | 212 | 				addr, | 
 | 213 | 				LP5521_PROG_MEM_SIZE, | 
 | 214 | 				pattern); | 
 | 215 |  | 
 | 216 | 	ret |= lp5521_write(client, LP5521_REG_OP_MODE, mode); | 
 | 217 | 	return ret; | 
 | 218 | } | 
 | 219 |  | 
 | 220 | static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr) | 
 | 221 | { | 
 | 222 | 	return lp5521_write(chip->client, | 
 | 223 | 		    LP5521_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr, | 
 | 224 | 		    curr); | 
 | 225 | } | 
 | 226 |  | 
| Samu Onkalo | d4e7ad0 | 2011-01-12 16:59:19 -0800 | [diff] [blame] | 227 | static void lp5521_init_engine(struct lp5521_chip *chip) | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 228 | { | 
 | 229 | 	int i; | 
 | 230 | 	for (i = 0; i < ARRAY_SIZE(chip->engines); i++) { | 
 | 231 | 		chip->engines[i].id = i + 1; | 
 | 232 | 		chip->engines[i].engine_mask = LP5521_ENG_MASK_BASE >> (i * 2); | 
 | 233 | 		chip->engines[i].prog_page = i; | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 234 | 	} | 
 | 235 | } | 
 | 236 |  | 
| Samu Onkalo | d4e7ad0 | 2011-01-12 16:59:19 -0800 | [diff] [blame] | 237 | static int lp5521_configure(struct i2c_client *client) | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 238 | { | 
 | 239 | 	struct lp5521_chip *chip = i2c_get_clientdata(client); | 
 | 240 | 	int ret; | 
 | 241 |  | 
| Samu Onkalo | d4e7ad0 | 2011-01-12 16:59:19 -0800 | [diff] [blame] | 242 | 	lp5521_init_engine(chip); | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 243 |  | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 244 | 	/* Set all PWMs to direct control mode */ | 
 | 245 | 	ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F); | 
 | 246 |  | 
 | 247 | 	/* Enable auto-powersave, set charge pump to auto, red to battery */ | 
 | 248 | 	ret |= lp5521_write(client, LP5521_REG_CONFIG, | 
 | 249 | 		LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT); | 
 | 250 |  | 
 | 251 | 	/* Initialize all channels PWM to zero -> leds off */ | 
 | 252 | 	ret |= lp5521_write(client, LP5521_REG_R_PWM, 0); | 
 | 253 | 	ret |= lp5521_write(client, LP5521_REG_G_PWM, 0); | 
 | 254 | 	ret |= lp5521_write(client, LP5521_REG_B_PWM, 0); | 
 | 255 |  | 
 | 256 | 	/* Set engines are set to run state when OP_MODE enables engines */ | 
 | 257 | 	ret |= lp5521_write(client, LP5521_REG_ENABLE, | 
 | 258 | 			LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM | | 
 | 259 | 			LP5521_EXEC_RUN); | 
| Samu Onkalo | 09c76b0 | 2010-11-24 12:57:03 -0800 | [diff] [blame] | 260 | 	/* enable takes 500us. 1 - 2 ms leaves some margin */ | 
 | 261 | 	usleep_range(1000, 2000); | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 262 |  | 
 | 263 | 	return ret; | 
 | 264 | } | 
 | 265 |  | 
 | 266 | static int lp5521_run_selftest(struct lp5521_chip *chip, char *buf) | 
 | 267 | { | 
 | 268 | 	int ret; | 
 | 269 | 	u8 status; | 
 | 270 |  | 
 | 271 | 	ret = lp5521_read(chip->client, LP5521_REG_STATUS, &status); | 
 | 272 | 	if (ret < 0) | 
 | 273 | 		return ret; | 
 | 274 |  | 
 | 275 | 	/* Check that ext clock is really in use if requested */ | 
 | 276 | 	if (chip->pdata && chip->pdata->clock_mode == LP5521_CLOCK_EXT) | 
 | 277 | 		if  ((status & LP5521_EXT_CLK_USED) == 0) | 
 | 278 | 			return -EIO; | 
 | 279 | 	return 0; | 
 | 280 | } | 
 | 281 |  | 
 | 282 | static void lp5521_set_brightness(struct led_classdev *cdev, | 
 | 283 | 			     enum led_brightness brightness) | 
 | 284 | { | 
 | 285 | 	struct lp5521_led *led = cdev_to_led(cdev); | 
 | 286 | 	led->brightness = (u8)brightness; | 
 | 287 | 	schedule_work(&led->brightness_work); | 
 | 288 | } | 
 | 289 |  | 
 | 290 | static void lp5521_led_brightness_work(struct work_struct *work) | 
 | 291 | { | 
 | 292 | 	struct lp5521_led *led = container_of(work, | 
 | 293 | 					      struct lp5521_led, | 
 | 294 | 					      brightness_work); | 
 | 295 | 	struct lp5521_chip *chip = led_to_lp5521(led); | 
 | 296 | 	struct i2c_client *client = chip->client; | 
 | 297 |  | 
 | 298 | 	mutex_lock(&chip->lock); | 
 | 299 | 	lp5521_write(client, LP5521_REG_LED_PWM_BASE + led->chan_nr, | 
 | 300 | 		led->brightness); | 
 | 301 | 	mutex_unlock(&chip->lock); | 
 | 302 | } | 
 | 303 |  | 
 | 304 | /* Detect the chip by setting its ENABLE register and reading it back. */ | 
 | 305 | static int lp5521_detect(struct i2c_client *client) | 
 | 306 | { | 
 | 307 | 	int ret; | 
 | 308 | 	u8 buf; | 
 | 309 |  | 
 | 310 | 	ret = lp5521_write(client, LP5521_REG_ENABLE, | 
 | 311 | 			LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM); | 
 | 312 | 	if (ret) | 
 | 313 | 		return ret; | 
| Samu Onkalo | 09c76b0 | 2010-11-24 12:57:03 -0800 | [diff] [blame] | 314 | 	/* enable takes 500us. 1 - 2 ms leaves some margin */ | 
 | 315 | 	usleep_range(1000, 2000); | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 316 | 	ret = lp5521_read(client, LP5521_REG_ENABLE, &buf); | 
 | 317 | 	if (ret) | 
 | 318 | 		return ret; | 
 | 319 | 	if (buf != (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM)) | 
 | 320 | 		return -ENODEV; | 
 | 321 |  | 
 | 322 | 	return 0; | 
 | 323 | } | 
 | 324 |  | 
 | 325 | /* Set engine mode and create appropriate sysfs attributes, if required. */ | 
 | 326 | static int lp5521_set_mode(struct lp5521_engine *engine, u8 mode) | 
 | 327 | { | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 328 | 	int ret = 0; | 
 | 329 |  | 
 | 330 | 	/* if in that mode already do nothing, except for run */ | 
 | 331 | 	if (mode == engine->mode && mode != LP5521_CMD_RUN) | 
 | 332 | 		return 0; | 
 | 333 |  | 
 | 334 | 	if (mode == LP5521_CMD_RUN) { | 
 | 335 | 		ret = lp5521_set_engine_mode(engine, LP5521_CMD_RUN); | 
 | 336 | 	} else if (mode == LP5521_CMD_LOAD) { | 
 | 337 | 		lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); | 
 | 338 | 		lp5521_set_engine_mode(engine, LP5521_CMD_LOAD); | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 339 | 	} else if (mode == LP5521_CMD_DISABLED) { | 
 | 340 | 		lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); | 
 | 341 | 	} | 
 | 342 |  | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 343 | 	engine->mode = mode; | 
 | 344 |  | 
 | 345 | 	return ret; | 
 | 346 | } | 
 | 347 |  | 
 | 348 | static int lp5521_do_store_load(struct lp5521_engine *engine, | 
 | 349 | 				const char *buf, size_t len) | 
 | 350 | { | 
 | 351 | 	struct lp5521_chip *chip = engine_to_lp5521(engine); | 
 | 352 | 	struct i2c_client *client = chip->client; | 
 | 353 | 	int  ret, nrchars, offset = 0, i = 0; | 
 | 354 | 	char c[3]; | 
 | 355 | 	unsigned cmd; | 
 | 356 | 	u8 pattern[LP5521_PROGRAM_LENGTH] = {0}; | 
 | 357 |  | 
 | 358 | 	while ((offset < len - 1) && (i < LP5521_PROGRAM_LENGTH)) { | 
 | 359 | 		/* separate sscanfs because length is working only for %s */ | 
 | 360 | 		ret = sscanf(buf + offset, "%2s%n ", c, &nrchars); | 
| Vasiliy Kulikov | 2260209 | 2011-01-12 16:59:14 -0800 | [diff] [blame] | 361 | 		if (ret != 2) | 
 | 362 | 			goto fail; | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 363 | 		ret = sscanf(c, "%2x", &cmd); | 
 | 364 | 		if (ret != 1) | 
 | 365 | 			goto fail; | 
 | 366 | 		pattern[i] = (u8)cmd; | 
 | 367 |  | 
 | 368 | 		offset += nrchars; | 
 | 369 | 		i++; | 
 | 370 | 	} | 
 | 371 |  | 
 | 372 | 	/* Each instruction is 16bit long. Check that length is even */ | 
 | 373 | 	if (i % 2) | 
 | 374 | 		goto fail; | 
 | 375 |  | 
 | 376 | 	mutex_lock(&chip->lock); | 
| Samu Onkalo | d4e7ad0 | 2011-01-12 16:59:19 -0800 | [diff] [blame] | 377 | 	if (engine->mode == LP5521_CMD_LOAD) | 
 | 378 | 		ret = lp5521_load_program(engine, pattern); | 
 | 379 | 	else | 
 | 380 | 		ret = -EINVAL; | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 381 | 	mutex_unlock(&chip->lock); | 
 | 382 |  | 
 | 383 | 	if (ret) { | 
 | 384 | 		dev_err(&client->dev, "failed loading pattern\n"); | 
 | 385 | 		return ret; | 
 | 386 | 	} | 
 | 387 |  | 
 | 388 | 	return len; | 
 | 389 | fail: | 
 | 390 | 	dev_err(&client->dev, "wrong pattern format\n"); | 
 | 391 | 	return -EINVAL; | 
 | 392 | } | 
 | 393 |  | 
 | 394 | static ssize_t store_engine_load(struct device *dev, | 
 | 395 | 				     struct device_attribute *attr, | 
 | 396 | 				     const char *buf, size_t len, int nr) | 
 | 397 | { | 
 | 398 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 399 | 	struct lp5521_chip *chip = i2c_get_clientdata(client); | 
 | 400 | 	return lp5521_do_store_load(&chip->engines[nr - 1], buf, len); | 
 | 401 | } | 
 | 402 |  | 
 | 403 | #define store_load(nr)							\ | 
 | 404 | static ssize_t store_engine##nr##_load(struct device *dev,		\ | 
 | 405 | 				     struct device_attribute *attr,	\ | 
 | 406 | 				     const char *buf, size_t len)	\ | 
 | 407 | {									\ | 
 | 408 | 	return store_engine_load(dev, attr, buf, len, nr);		\ | 
 | 409 | } | 
 | 410 | store_load(1) | 
 | 411 | store_load(2) | 
 | 412 | store_load(3) | 
 | 413 |  | 
 | 414 | static ssize_t show_engine_mode(struct device *dev, | 
 | 415 | 				struct device_attribute *attr, | 
 | 416 | 				char *buf, int nr) | 
 | 417 | { | 
 | 418 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 419 | 	struct lp5521_chip *chip = i2c_get_clientdata(client); | 
 | 420 | 	switch (chip->engines[nr - 1].mode) { | 
 | 421 | 	case LP5521_CMD_RUN: | 
 | 422 | 		return sprintf(buf, "run\n"); | 
 | 423 | 	case LP5521_CMD_LOAD: | 
 | 424 | 		return sprintf(buf, "load\n"); | 
 | 425 | 	case LP5521_CMD_DISABLED: | 
 | 426 | 		return sprintf(buf, "disabled\n"); | 
 | 427 | 	default: | 
 | 428 | 		return sprintf(buf, "disabled\n"); | 
 | 429 | 	} | 
 | 430 | } | 
 | 431 |  | 
 | 432 | #define show_mode(nr)							\ | 
 | 433 | static ssize_t show_engine##nr##_mode(struct device *dev,		\ | 
 | 434 | 				    struct device_attribute *attr,	\ | 
 | 435 | 				    char *buf)				\ | 
 | 436 | {									\ | 
 | 437 | 	return show_engine_mode(dev, attr, buf, nr);			\ | 
 | 438 | } | 
 | 439 | show_mode(1) | 
 | 440 | show_mode(2) | 
 | 441 | show_mode(3) | 
 | 442 |  | 
 | 443 | static ssize_t store_engine_mode(struct device *dev, | 
 | 444 | 				 struct device_attribute *attr, | 
 | 445 | 				 const char *buf, size_t len, int nr) | 
 | 446 | { | 
 | 447 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 448 | 	struct lp5521_chip *chip = i2c_get_clientdata(client); | 
 | 449 | 	struct lp5521_engine *engine = &chip->engines[nr - 1]; | 
 | 450 | 	mutex_lock(&chip->lock); | 
 | 451 |  | 
 | 452 | 	if (!strncmp(buf, "run", 3)) | 
 | 453 | 		lp5521_set_mode(engine, LP5521_CMD_RUN); | 
 | 454 | 	else if (!strncmp(buf, "load", 4)) | 
 | 455 | 		lp5521_set_mode(engine, LP5521_CMD_LOAD); | 
 | 456 | 	else if (!strncmp(buf, "disabled", 8)) | 
 | 457 | 		lp5521_set_mode(engine, LP5521_CMD_DISABLED); | 
 | 458 |  | 
 | 459 | 	mutex_unlock(&chip->lock); | 
 | 460 | 	return len; | 
 | 461 | } | 
 | 462 |  | 
 | 463 | #define store_mode(nr)							\ | 
 | 464 | static ssize_t store_engine##nr##_mode(struct device *dev,		\ | 
 | 465 | 				     struct device_attribute *attr,	\ | 
 | 466 | 				     const char *buf, size_t len)	\ | 
 | 467 | {									\ | 
 | 468 | 	return store_engine_mode(dev, attr, buf, len, nr);		\ | 
 | 469 | } | 
 | 470 | store_mode(1) | 
 | 471 | store_mode(2) | 
 | 472 | store_mode(3) | 
 | 473 |  | 
 | 474 | static ssize_t show_max_current(struct device *dev, | 
 | 475 | 			    struct device_attribute *attr, | 
 | 476 | 			    char *buf) | 
 | 477 | { | 
 | 478 | 	struct led_classdev *led_cdev = dev_get_drvdata(dev); | 
 | 479 | 	struct lp5521_led *led = cdev_to_led(led_cdev); | 
 | 480 |  | 
 | 481 | 	return sprintf(buf, "%d\n", led->max_current); | 
 | 482 | } | 
 | 483 |  | 
 | 484 | static ssize_t show_current(struct device *dev, | 
 | 485 | 			    struct device_attribute *attr, | 
 | 486 | 			    char *buf) | 
 | 487 | { | 
 | 488 | 	struct led_classdev *led_cdev = dev_get_drvdata(dev); | 
 | 489 | 	struct lp5521_led *led = cdev_to_led(led_cdev); | 
 | 490 |  | 
 | 491 | 	return sprintf(buf, "%d\n", led->led_current); | 
 | 492 | } | 
 | 493 |  | 
 | 494 | static ssize_t store_current(struct device *dev, | 
 | 495 | 			     struct device_attribute *attr, | 
 | 496 | 			     const char *buf, size_t len) | 
 | 497 | { | 
 | 498 | 	struct led_classdev *led_cdev = dev_get_drvdata(dev); | 
 | 499 | 	struct lp5521_led *led = cdev_to_led(led_cdev); | 
 | 500 | 	struct lp5521_chip *chip = led_to_lp5521(led); | 
 | 501 | 	ssize_t ret; | 
 | 502 | 	unsigned long curr; | 
 | 503 |  | 
 | 504 | 	if (strict_strtoul(buf, 0, &curr)) | 
 | 505 | 		return -EINVAL; | 
 | 506 |  | 
 | 507 | 	if (curr > led->max_current) | 
 | 508 | 		return -EINVAL; | 
 | 509 |  | 
 | 510 | 	mutex_lock(&chip->lock); | 
 | 511 | 	ret = lp5521_set_led_current(chip, led->id, curr); | 
 | 512 | 	mutex_unlock(&chip->lock); | 
 | 513 |  | 
 | 514 | 	if (ret < 0) | 
 | 515 | 		return ret; | 
 | 516 |  | 
 | 517 | 	led->led_current = (u8)curr; | 
 | 518 |  | 
 | 519 | 	return len; | 
 | 520 | } | 
 | 521 |  | 
 | 522 | static ssize_t lp5521_selftest(struct device *dev, | 
 | 523 | 			       struct device_attribute *attr, | 
 | 524 | 			       char *buf) | 
 | 525 | { | 
 | 526 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 527 | 	struct lp5521_chip *chip = i2c_get_clientdata(client); | 
 | 528 | 	int ret; | 
 | 529 |  | 
 | 530 | 	mutex_lock(&chip->lock); | 
 | 531 | 	ret = lp5521_run_selftest(chip, buf); | 
 | 532 | 	mutex_unlock(&chip->lock); | 
 | 533 | 	return sprintf(buf, "%s\n", ret ? "FAIL" : "OK"); | 
 | 534 | } | 
 | 535 |  | 
 | 536 | /* led class device attributes */ | 
 | 537 | static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current); | 
 | 538 | static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL); | 
 | 539 |  | 
 | 540 | static struct attribute *lp5521_led_attributes[] = { | 
 | 541 | 	&dev_attr_led_current.attr, | 
 | 542 | 	&dev_attr_max_current.attr, | 
 | 543 | 	NULL, | 
 | 544 | }; | 
 | 545 |  | 
 | 546 | static struct attribute_group lp5521_led_attribute_group = { | 
 | 547 | 	.attrs = lp5521_led_attributes | 
 | 548 | }; | 
 | 549 |  | 
 | 550 | /* device attributes */ | 
 | 551 | static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO, | 
 | 552 | 		   show_engine1_mode, store_engine1_mode); | 
 | 553 | static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO, | 
 | 554 | 		   show_engine2_mode, store_engine2_mode); | 
 | 555 | static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO, | 
 | 556 | 		   show_engine3_mode, store_engine3_mode); | 
 | 557 | static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load); | 
 | 558 | static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load); | 
 | 559 | static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load); | 
 | 560 | static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL); | 
 | 561 |  | 
 | 562 | static struct attribute *lp5521_attributes[] = { | 
 | 563 | 	&dev_attr_engine1_mode.attr, | 
 | 564 | 	&dev_attr_engine2_mode.attr, | 
 | 565 | 	&dev_attr_engine3_mode.attr, | 
 | 566 | 	&dev_attr_selftest.attr, | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 567 | 	&dev_attr_engine1_load.attr, | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 568 | 	&dev_attr_engine2_load.attr, | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 569 | 	&dev_attr_engine3_load.attr, | 
 | 570 | 	NULL | 
 | 571 | }; | 
 | 572 |  | 
 | 573 | static const struct attribute_group lp5521_group = { | 
 | 574 | 	.attrs = lp5521_attributes, | 
 | 575 | }; | 
 | 576 |  | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 577 | static int lp5521_register_sysfs(struct i2c_client *client) | 
 | 578 | { | 
 | 579 | 	struct device *dev = &client->dev; | 
 | 580 | 	return sysfs_create_group(&dev->kobj, &lp5521_group); | 
 | 581 | } | 
 | 582 |  | 
 | 583 | static void lp5521_unregister_sysfs(struct i2c_client *client) | 
 | 584 | { | 
 | 585 | 	struct lp5521_chip *chip = i2c_get_clientdata(client); | 
 | 586 | 	struct device *dev = &client->dev; | 
 | 587 | 	int i; | 
 | 588 |  | 
 | 589 | 	sysfs_remove_group(&dev->kobj, &lp5521_group); | 
 | 590 |  | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 591 | 	for (i = 0; i < chip->num_leds; i++) | 
 | 592 | 		sysfs_remove_group(&chip->leds[i].cdev.dev->kobj, | 
 | 593 | 				&lp5521_led_attribute_group); | 
 | 594 | } | 
 | 595 |  | 
 | 596 | static int __init lp5521_init_led(struct lp5521_led *led, | 
 | 597 | 				struct i2c_client *client, | 
 | 598 | 				int chan, struct lp5521_platform_data *pdata) | 
 | 599 | { | 
 | 600 | 	struct device *dev = &client->dev; | 
 | 601 | 	char name[32]; | 
 | 602 | 	int res; | 
 | 603 |  | 
 | 604 | 	if (chan >= LP5521_MAX_LEDS) | 
 | 605 | 		return -EINVAL; | 
 | 606 |  | 
 | 607 | 	if (pdata->led_config[chan].led_current == 0) | 
 | 608 | 		return 0; | 
 | 609 |  | 
 | 610 | 	led->led_current = pdata->led_config[chan].led_current; | 
 | 611 | 	led->max_current = pdata->led_config[chan].max_current; | 
 | 612 | 	led->chan_nr = pdata->led_config[chan].chan_nr; | 
 | 613 |  | 
 | 614 | 	if (led->chan_nr >= LP5521_MAX_LEDS) { | 
 | 615 | 		dev_err(dev, "Use channel numbers between 0 and %d\n", | 
 | 616 | 			LP5521_MAX_LEDS - 1); | 
 | 617 | 		return -EINVAL; | 
 | 618 | 	} | 
 | 619 |  | 
| Arun Murthy | 61a8393 | 2011-01-12 16:59:20 -0800 | [diff] [blame] | 620 | 	snprintf(name, sizeof(name), "%s:channel%d", | 
 | 621 | 			pdata->label ?: client->name, chan); | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 622 | 	led->cdev.brightness_set = lp5521_set_brightness; | 
 | 623 | 	led->cdev.name = name; | 
 | 624 | 	res = led_classdev_register(dev, &led->cdev); | 
 | 625 | 	if (res < 0) { | 
 | 626 | 		dev_err(dev, "couldn't register led on channel %d\n", chan); | 
 | 627 | 		return res; | 
 | 628 | 	} | 
 | 629 |  | 
 | 630 | 	res = sysfs_create_group(&led->cdev.dev->kobj, | 
 | 631 | 			&lp5521_led_attribute_group); | 
 | 632 | 	if (res < 0) { | 
 | 633 | 		dev_err(dev, "couldn't register current attribute\n"); | 
 | 634 | 		led_classdev_unregister(&led->cdev); | 
 | 635 | 		return res; | 
 | 636 | 	} | 
 | 637 | 	return 0; | 
 | 638 | } | 
 | 639 |  | 
 | 640 | static int lp5521_probe(struct i2c_client *client, | 
 | 641 | 			const struct i2c_device_id *id) | 
 | 642 | { | 
 | 643 | 	struct lp5521_chip		*chip; | 
 | 644 | 	struct lp5521_platform_data	*pdata; | 
 | 645 | 	int ret, i, led; | 
 | 646 |  | 
 | 647 | 	chip = kzalloc(sizeof(*chip), GFP_KERNEL); | 
 | 648 | 	if (!chip) | 
 | 649 | 		return -ENOMEM; | 
 | 650 |  | 
 | 651 | 	i2c_set_clientdata(client, chip); | 
 | 652 | 	chip->client = client; | 
 | 653 |  | 
 | 654 | 	pdata = client->dev.platform_data; | 
 | 655 |  | 
 | 656 | 	if (!pdata) { | 
 | 657 | 		dev_err(&client->dev, "no platform data\n"); | 
 | 658 | 		ret = -EINVAL; | 
 | 659 | 		goto fail1; | 
 | 660 | 	} | 
 | 661 |  | 
 | 662 | 	mutex_init(&chip->lock); | 
 | 663 |  | 
 | 664 | 	chip->pdata   = pdata; | 
 | 665 |  | 
 | 666 | 	if (pdata->setup_resources) { | 
 | 667 | 		ret = pdata->setup_resources(); | 
 | 668 | 		if (ret < 0) | 
 | 669 | 			goto fail1; | 
 | 670 | 	} | 
 | 671 |  | 
 | 672 | 	if (pdata->enable) { | 
 | 673 | 		pdata->enable(0); | 
| Samu Onkalo | 09c76b0 | 2010-11-24 12:57:03 -0800 | [diff] [blame] | 674 | 		usleep_range(1000, 2000); /* Keep enable down at least 1ms */ | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 675 | 		pdata->enable(1); | 
| Samu Onkalo | 09c76b0 | 2010-11-24 12:57:03 -0800 | [diff] [blame] | 676 | 		usleep_range(1000, 2000); /* 500us abs min. */ | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 677 | 	} | 
 | 678 |  | 
| Samu Onkalo | 95ea8ee | 2010-11-24 12:57:05 -0800 | [diff] [blame] | 679 | 	lp5521_write(client, LP5521_REG_RESET, 0xff); | 
 | 680 | 	usleep_range(10000, 20000); /* | 
 | 681 | 				     * Exact value is not available. 10 - 20ms | 
 | 682 | 				     * appears to be enough for reset. | 
 | 683 | 				     */ | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 684 | 	ret = lp5521_detect(client); | 
 | 685 |  | 
 | 686 | 	if (ret) { | 
 | 687 | 		dev_err(&client->dev, "Chip not found\n"); | 
 | 688 | 		goto fail2; | 
 | 689 | 	} | 
 | 690 |  | 
 | 691 | 	dev_info(&client->dev, "%s programmable led chip found\n", id->name); | 
 | 692 |  | 
| Samu Onkalo | d4e7ad0 | 2011-01-12 16:59:19 -0800 | [diff] [blame] | 693 | 	ret = lp5521_configure(client); | 
| Samu Onkalo | 500fe14 | 2010-11-11 14:05:22 -0800 | [diff] [blame] | 694 | 	if (ret < 0) { | 
 | 695 | 		dev_err(&client->dev, "error configuring chip\n"); | 
 | 696 | 		goto fail2; | 
 | 697 | 	} | 
 | 698 |  | 
 | 699 | 	/* Initialize leds */ | 
 | 700 | 	chip->num_channels = pdata->num_channels; | 
 | 701 | 	chip->num_leds = 0; | 
 | 702 | 	led = 0; | 
 | 703 | 	for (i = 0; i < pdata->num_channels; i++) { | 
 | 704 | 		/* Do not initialize channels that are not connected */ | 
 | 705 | 		if (pdata->led_config[i].led_current == 0) | 
 | 706 | 			continue; | 
 | 707 |  | 
 | 708 | 		ret = lp5521_init_led(&chip->leds[led], client, i, pdata); | 
 | 709 | 		if (ret) { | 
 | 710 | 			dev_err(&client->dev, "error initializing leds\n"); | 
 | 711 | 			goto fail3; | 
 | 712 | 		} | 
 | 713 | 		chip->num_leds++; | 
 | 714 |  | 
 | 715 | 		chip->leds[led].id = led; | 
 | 716 | 		/* Set initial LED current */ | 
 | 717 | 		lp5521_set_led_current(chip, led, | 
 | 718 | 				chip->leds[led].led_current); | 
 | 719 |  | 
 | 720 | 		INIT_WORK(&(chip->leds[led].brightness_work), | 
 | 721 | 			lp5521_led_brightness_work); | 
 | 722 |  | 
 | 723 | 		led++; | 
 | 724 | 	} | 
 | 725 |  | 
 | 726 | 	ret = lp5521_register_sysfs(client); | 
 | 727 | 	if (ret) { | 
 | 728 | 		dev_err(&client->dev, "registering sysfs failed\n"); | 
 | 729 | 		goto fail3; | 
 | 730 | 	} | 
 | 731 | 	return ret; | 
 | 732 | fail3: | 
 | 733 | 	for (i = 0; i < chip->num_leds; i++) { | 
 | 734 | 		led_classdev_unregister(&chip->leds[i].cdev); | 
 | 735 | 		cancel_work_sync(&chip->leds[i].brightness_work); | 
 | 736 | 	} | 
 | 737 | fail2: | 
 | 738 | 	if (pdata->enable) | 
 | 739 | 		pdata->enable(0); | 
 | 740 | 	if (pdata->release_resources) | 
 | 741 | 		pdata->release_resources(); | 
 | 742 | fail1: | 
 | 743 | 	kfree(chip); | 
 | 744 | 	return ret; | 
 | 745 | } | 
 | 746 |  | 
 | 747 | static int lp5521_remove(struct i2c_client *client) | 
 | 748 | { | 
 | 749 | 	struct lp5521_chip *chip = i2c_get_clientdata(client); | 
 | 750 | 	int i; | 
 | 751 |  | 
 | 752 | 	lp5521_unregister_sysfs(client); | 
 | 753 |  | 
 | 754 | 	for (i = 0; i < chip->num_leds; i++) { | 
 | 755 | 		led_classdev_unregister(&chip->leds[i].cdev); | 
 | 756 | 		cancel_work_sync(&chip->leds[i].brightness_work); | 
 | 757 | 	} | 
 | 758 |  | 
 | 759 | 	if (chip->pdata->enable) | 
 | 760 | 		chip->pdata->enable(0); | 
 | 761 | 	if (chip->pdata->release_resources) | 
 | 762 | 		chip->pdata->release_resources(); | 
 | 763 | 	kfree(chip); | 
 | 764 | 	return 0; | 
 | 765 | } | 
 | 766 |  | 
 | 767 | static const struct i2c_device_id lp5521_id[] = { | 
 | 768 | 	{ "lp5521", 0 }, /* Three channel chip */ | 
 | 769 | 	{ } | 
 | 770 | }; | 
 | 771 | MODULE_DEVICE_TABLE(i2c, lp5521_id); | 
 | 772 |  | 
 | 773 | static struct i2c_driver lp5521_driver = { | 
 | 774 | 	.driver = { | 
 | 775 | 		.name	= "lp5521", | 
 | 776 | 	}, | 
 | 777 | 	.probe		= lp5521_probe, | 
 | 778 | 	.remove		= lp5521_remove, | 
 | 779 | 	.id_table	= lp5521_id, | 
 | 780 | }; | 
 | 781 |  | 
 | 782 | static int __init lp5521_init(void) | 
 | 783 | { | 
 | 784 | 	int ret; | 
 | 785 |  | 
 | 786 | 	ret = i2c_add_driver(&lp5521_driver); | 
 | 787 |  | 
 | 788 | 	if (ret < 0) | 
 | 789 | 		printk(KERN_ALERT "Adding lp5521 driver failed\n"); | 
 | 790 |  | 
 | 791 | 	return ret; | 
 | 792 | } | 
 | 793 |  | 
 | 794 | static void __exit lp5521_exit(void) | 
 | 795 | { | 
 | 796 | 	i2c_del_driver(&lp5521_driver); | 
 | 797 | } | 
 | 798 |  | 
 | 799 | module_init(lp5521_init); | 
 | 800 | module_exit(lp5521_exit); | 
 | 801 |  | 
 | 802 | MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo"); | 
 | 803 | MODULE_DESCRIPTION("LP5521 LED engine"); | 
 | 804 | MODULE_LICENSE("GPL v2"); |