| Viresh KUMAR | c63b3cb | 2010-05-26 14:42:10 -0700 | [diff] [blame] | 1 | /* | 
 | 2 |  * drivers/mmc/host/sdhci-spear.c | 
 | 3 |  * | 
 | 4 |  * Support of SDHCI platform devices for spear soc family | 
 | 5 |  * | 
 | 6 |  * Copyright (C) 2010 ST Microelectronics | 
 | 7 |  * Viresh Kumar<viresh.kumar@st.com> | 
 | 8 |  * | 
 | 9 |  * Inspired by sdhci-pltfm.c | 
 | 10 |  * | 
 | 11 |  * This file is licensed under the terms of the GNU General Public | 
 | 12 |  * License version 2. This program is licensed "as is" without any | 
 | 13 |  * warranty of any kind, whether express or implied. | 
 | 14 |  */ | 
 | 15 |  | 
 | 16 | #include <linux/clk.h> | 
 | 17 | #include <linux/delay.h> | 
 | 18 | #include <linux/gpio.h> | 
 | 19 | #include <linux/highmem.h> | 
 | 20 | #include <linux/interrupt.h> | 
 | 21 | #include <linux/irq.h> | 
 | 22 | #include <linux/platform_device.h> | 
 | 23 | #include <linux/slab.h> | 
 | 24 | #include <linux/mmc/host.h> | 
 | 25 | #include <linux/mmc/sdhci-spear.h> | 
 | 26 | #include <linux/io.h> | 
 | 27 | #include "sdhci.h" | 
 | 28 |  | 
 | 29 | struct spear_sdhci { | 
 | 30 | 	struct clk *clk; | 
 | 31 | 	struct sdhci_plat_data *data; | 
 | 32 | }; | 
 | 33 |  | 
 | 34 | /* sdhci ops */ | 
 | 35 | static struct sdhci_ops sdhci_pltfm_ops = { | 
 | 36 | 	/* Nothing to do for now. */ | 
 | 37 | }; | 
 | 38 |  | 
 | 39 | /* gpio card detection interrupt handler */ | 
 | 40 | static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id) | 
 | 41 | { | 
 | 42 | 	struct platform_device *pdev = dev_id; | 
 | 43 | 	struct sdhci_host *host = platform_get_drvdata(pdev); | 
 | 44 | 	struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev); | 
 | 45 | 	unsigned long gpio_irq_type; | 
 | 46 | 	int val; | 
 | 47 |  | 
 | 48 | 	val = gpio_get_value(sdhci->data->card_int_gpio); | 
 | 49 |  | 
 | 50 | 	/* val == 1 -> card removed, val == 0 -> card inserted */ | 
 | 51 | 	/* if card removed - set irq for low level, else vice versa */ | 
 | 52 | 	gpio_irq_type = val ? IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH; | 
 | 53 | 	set_irq_type(irq, gpio_irq_type); | 
 | 54 |  | 
 | 55 | 	if (sdhci->data->card_power_gpio >= 0) { | 
 | 56 | 		if (!sdhci->data->power_always_enb) { | 
 | 57 | 			/* if card inserted, give power, otherwise remove it */ | 
 | 58 | 			val = sdhci->data->power_active_high ? !val : val ; | 
 | 59 | 			gpio_set_value(sdhci->data->card_power_gpio, val); | 
 | 60 | 		} | 
 | 61 | 	} | 
 | 62 |  | 
 | 63 | 	/* inform sdhci driver about card insertion/removal */ | 
 | 64 | 	tasklet_schedule(&host->card_tasklet); | 
 | 65 |  | 
 | 66 | 	return IRQ_HANDLED; | 
 | 67 | } | 
 | 68 |  | 
 | 69 | static int __devinit sdhci_probe(struct platform_device *pdev) | 
 | 70 | { | 
 | 71 | 	struct sdhci_host *host; | 
 | 72 | 	struct resource *iomem; | 
 | 73 | 	struct spear_sdhci *sdhci; | 
 | 74 | 	int ret; | 
 | 75 |  | 
 | 76 | 	BUG_ON(pdev == NULL); | 
 | 77 |  | 
 | 78 | 	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 79 | 	if (!iomem) { | 
 | 80 | 		ret = -ENOMEM; | 
 | 81 | 		dev_dbg(&pdev->dev, "memory resource not defined\n"); | 
 | 82 | 		goto err; | 
 | 83 | 	} | 
 | 84 |  | 
 | 85 | 	if (!request_mem_region(iomem->start, resource_size(iomem), | 
 | 86 | 				"spear-sdhci")) { | 
 | 87 | 		ret = -EBUSY; | 
 | 88 | 		dev_dbg(&pdev->dev, "cannot request region\n"); | 
 | 89 | 		goto err; | 
 | 90 | 	} | 
 | 91 |  | 
 | 92 | 	sdhci = kzalloc(sizeof(*sdhci), GFP_KERNEL); | 
 | 93 | 	if (!sdhci) { | 
 | 94 | 		ret = -ENOMEM; | 
 | 95 | 		dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n"); | 
 | 96 | 		goto err_kzalloc; | 
 | 97 | 	} | 
 | 98 |  | 
 | 99 | 	/* clk enable */ | 
 | 100 | 	sdhci->clk = clk_get(&pdev->dev, NULL); | 
 | 101 | 	if (IS_ERR(sdhci->clk)) { | 
 | 102 | 		ret = PTR_ERR(sdhci->clk); | 
 | 103 | 		dev_dbg(&pdev->dev, "Error getting clock\n"); | 
 | 104 | 		goto err_clk_get; | 
 | 105 | 	} | 
 | 106 |  | 
 | 107 | 	ret = clk_enable(sdhci->clk); | 
 | 108 | 	if (ret) { | 
 | 109 | 		dev_dbg(&pdev->dev, "Error enabling clock\n"); | 
 | 110 | 		goto err_clk_enb; | 
 | 111 | 	} | 
 | 112 |  | 
 | 113 | 	/* overwrite platform_data */ | 
 | 114 | 	sdhci->data = dev_get_platdata(&pdev->dev); | 
 | 115 | 	pdev->dev.platform_data = sdhci; | 
 | 116 |  | 
 | 117 | 	if (pdev->dev.parent) | 
 | 118 | 		host = sdhci_alloc_host(pdev->dev.parent, 0); | 
 | 119 | 	else | 
 | 120 | 		host = sdhci_alloc_host(&pdev->dev, 0); | 
 | 121 |  | 
 | 122 | 	if (IS_ERR(host)) { | 
 | 123 | 		ret = PTR_ERR(host); | 
 | 124 | 		dev_dbg(&pdev->dev, "error allocating host\n"); | 
 | 125 | 		goto err_alloc_host; | 
 | 126 | 	} | 
 | 127 |  | 
 | 128 | 	host->hw_name = "sdhci"; | 
 | 129 | 	host->ops = &sdhci_pltfm_ops; | 
 | 130 | 	host->irq = platform_get_irq(pdev, 0); | 
 | 131 | 	host->quirks = SDHCI_QUIRK_BROKEN_ADMA; | 
 | 132 |  | 
 | 133 | 	host->ioaddr = ioremap(iomem->start, resource_size(iomem)); | 
 | 134 | 	if (!host->ioaddr) { | 
 | 135 | 		ret = -ENOMEM; | 
 | 136 | 		dev_dbg(&pdev->dev, "failed to remap registers\n"); | 
 | 137 | 		goto err_ioremap; | 
 | 138 | 	} | 
 | 139 |  | 
 | 140 | 	ret = sdhci_add_host(host); | 
 | 141 | 	if (ret) { | 
 | 142 | 		dev_dbg(&pdev->dev, "error adding host\n"); | 
 | 143 | 		goto err_add_host; | 
 | 144 | 	} | 
 | 145 |  | 
 | 146 | 	platform_set_drvdata(pdev, host); | 
 | 147 |  | 
 | 148 | 	/* | 
 | 149 | 	 * It is optional to use GPIOs for sdhci Power control & sdhci card | 
 | 150 | 	 * interrupt detection. If sdhci->data is NULL, then use original sdhci | 
 | 151 | 	 * lines otherwise GPIO lines. | 
 | 152 | 	 * If GPIO is selected for power control, then power should be disabled | 
 | 153 | 	 * after card removal and should be enabled when card insertion | 
 | 154 | 	 * interrupt occurs | 
 | 155 | 	 */ | 
 | 156 | 	if (!sdhci->data) | 
 | 157 | 		return 0; | 
 | 158 |  | 
 | 159 | 	if (sdhci->data->card_power_gpio >= 0) { | 
 | 160 | 		int val = 0; | 
 | 161 |  | 
 | 162 | 		ret = gpio_request(sdhci->data->card_power_gpio, "sdhci"); | 
 | 163 | 		if (ret < 0) { | 
 | 164 | 			dev_dbg(&pdev->dev, "gpio request fail: %d\n", | 
 | 165 | 					sdhci->data->card_power_gpio); | 
 | 166 | 			goto err_pgpio_request; | 
 | 167 | 		} | 
 | 168 |  | 
 | 169 | 		if (sdhci->data->power_always_enb) | 
 | 170 | 			val = sdhci->data->power_active_high; | 
 | 171 | 		else | 
 | 172 | 			val = !sdhci->data->power_active_high; | 
 | 173 |  | 
 | 174 | 		ret = gpio_direction_output(sdhci->data->card_power_gpio, val); | 
 | 175 | 		if (ret) { | 
 | 176 | 			dev_dbg(&pdev->dev, "gpio set direction fail: %d\n", | 
 | 177 | 					sdhci->data->card_power_gpio); | 
 | 178 | 			goto err_pgpio_direction; | 
 | 179 | 		} | 
 | 180 |  | 
 | 181 | 		gpio_set_value(sdhci->data->card_power_gpio, 1); | 
 | 182 | 	} | 
 | 183 |  | 
 | 184 | 	if (sdhci->data->card_int_gpio >= 0) { | 
 | 185 | 		ret = gpio_request(sdhci->data->card_int_gpio, "sdhci"); | 
 | 186 | 		if (ret < 0) { | 
 | 187 | 			dev_dbg(&pdev->dev, "gpio request fail: %d\n", | 
 | 188 | 					sdhci->data->card_int_gpio); | 
 | 189 | 			goto err_igpio_request; | 
 | 190 | 		} | 
 | 191 |  | 
 | 192 | 		ret = gpio_direction_input(sdhci->data->card_int_gpio); | 
 | 193 | 		if (ret) { | 
 | 194 | 			dev_dbg(&pdev->dev, "gpio set direction fail: %d\n", | 
 | 195 | 					sdhci->data->card_int_gpio); | 
 | 196 | 			goto err_igpio_direction; | 
 | 197 | 		} | 
 | 198 | 		ret = request_irq(gpio_to_irq(sdhci->data->card_int_gpio), | 
 | 199 | 				sdhci_gpio_irq, IRQF_TRIGGER_LOW, | 
 | 200 | 				mmc_hostname(host->mmc), pdev); | 
 | 201 | 		if (ret) { | 
 | 202 | 			dev_dbg(&pdev->dev, "gpio request irq fail: %d\n", | 
 | 203 | 					sdhci->data->card_int_gpio); | 
 | 204 | 			goto err_igpio_request_irq; | 
 | 205 | 		} | 
 | 206 |  | 
 | 207 | 	} | 
 | 208 |  | 
 | 209 | 	return 0; | 
 | 210 |  | 
 | 211 | err_igpio_request_irq: | 
 | 212 | err_igpio_direction: | 
 | 213 | 	if (sdhci->data->card_int_gpio >= 0) | 
 | 214 | 		gpio_free(sdhci->data->card_int_gpio); | 
 | 215 | err_igpio_request: | 
 | 216 | err_pgpio_direction: | 
 | 217 | 	if (sdhci->data->card_power_gpio >= 0) | 
 | 218 | 		gpio_free(sdhci->data->card_power_gpio); | 
 | 219 | err_pgpio_request: | 
 | 220 | 	platform_set_drvdata(pdev, NULL); | 
 | 221 | 	sdhci_remove_host(host, 1); | 
 | 222 | err_add_host: | 
 | 223 | 	iounmap(host->ioaddr); | 
 | 224 | err_ioremap: | 
 | 225 | 	sdhci_free_host(host); | 
 | 226 | err_alloc_host: | 
 | 227 | 	clk_disable(sdhci->clk); | 
 | 228 | err_clk_enb: | 
 | 229 | 	clk_put(sdhci->clk); | 
 | 230 | err_clk_get: | 
 | 231 | 	kfree(sdhci); | 
 | 232 | err_kzalloc: | 
 | 233 | 	release_mem_region(iomem->start, resource_size(iomem)); | 
 | 234 | err: | 
 | 235 | 	dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret); | 
 | 236 | 	return ret; | 
 | 237 | } | 
 | 238 |  | 
 | 239 | static int __devexit sdhci_remove(struct platform_device *pdev) | 
 | 240 | { | 
 | 241 | 	struct sdhci_host *host = platform_get_drvdata(pdev); | 
 | 242 | 	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 243 | 	struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev); | 
 | 244 | 	int dead; | 
 | 245 | 	u32 scratch; | 
 | 246 |  | 
 | 247 | 	if (sdhci->data) { | 
 | 248 | 		if (sdhci->data->card_int_gpio >= 0) { | 
 | 249 | 			free_irq(gpio_to_irq(sdhci->data->card_int_gpio), pdev); | 
 | 250 | 			gpio_free(sdhci->data->card_int_gpio); | 
 | 251 | 		} | 
 | 252 |  | 
 | 253 | 		if (sdhci->data->card_power_gpio >= 0) | 
 | 254 | 			gpio_free(sdhci->data->card_power_gpio); | 
 | 255 | 	} | 
 | 256 |  | 
 | 257 | 	platform_set_drvdata(pdev, NULL); | 
 | 258 | 	dead = 0; | 
 | 259 | 	scratch = readl(host->ioaddr + SDHCI_INT_STATUS); | 
 | 260 | 	if (scratch == (u32)-1) | 
 | 261 | 		dead = 1; | 
 | 262 |  | 
 | 263 | 	sdhci_remove_host(host, dead); | 
 | 264 | 	iounmap(host->ioaddr); | 
 | 265 | 	sdhci_free_host(host); | 
 | 266 | 	clk_disable(sdhci->clk); | 
 | 267 | 	clk_put(sdhci->clk); | 
 | 268 | 	kfree(sdhci); | 
 | 269 | 	if (iomem) | 
 | 270 | 		release_mem_region(iomem->start, resource_size(iomem)); | 
 | 271 |  | 
 | 272 | 	return 0; | 
 | 273 | } | 
 | 274 |  | 
 | 275 | static struct platform_driver sdhci_driver = { | 
 | 276 | 	.driver = { | 
 | 277 | 		.name	= "sdhci", | 
 | 278 | 		.owner	= THIS_MODULE, | 
 | 279 | 	}, | 
 | 280 | 	.probe		= sdhci_probe, | 
 | 281 | 	.remove		= __devexit_p(sdhci_remove), | 
 | 282 | }; | 
 | 283 |  | 
 | 284 | static int __init sdhci_init(void) | 
 | 285 | { | 
 | 286 | 	return platform_driver_register(&sdhci_driver); | 
 | 287 | } | 
 | 288 | module_init(sdhci_init); | 
 | 289 |  | 
 | 290 | static void __exit sdhci_exit(void) | 
 | 291 | { | 
 | 292 | 	platform_driver_unregister(&sdhci_driver); | 
 | 293 | } | 
 | 294 | module_exit(sdhci_exit); | 
 | 295 |  | 
 | 296 | MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver"); | 
 | 297 | MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>"); | 
 | 298 | MODULE_LICENSE("GPL v2"); |