)]}' { "log": [ { "commit": "0004ba495a41fa86e533e2e1c8a39e2c0cbec1cc", "tree": "03cdbb8dd9eea2d39d68e38c2f56685bf8164e7d", "parents": [ "119c37c394c6f49ca853d41a4c0dada5e709e048", "c445c30e1ad245cfd9abe64bb80b863162469435" ], "author": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Mon Jul 02 17:32:36 2012 -0700" }, "committer": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Mon Jul 02 17:32:36 2012 -0700" }, "message": "Merge remote-tracking branch \u0027coreaurora.org/msm-3.4\u0027 into android-msm-mako-3.4-wip\n\nConflicts:\n\tarch/arm/mach-msm/clock-8960.c\n\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n" }, { "commit": "b5e69d8233d984387010d22ee3d6a94920bdfd3b", "tree": "1960dbb2276ebda1678ebf60ad4d6bd707878431", "parents": [ "20b1ec0889d9c7973adc4b91cef8f4661f78dfef" ], "author": { "name": "Jongrak Kwon", "email": "jongrak.kwon@lge.com", "time": "Fri Jun 29 18:03:36 2012 -0700" }, "committer": { "name": "Jongrak Kwon", "email": "jongrak.kwon@lge.com", "time": "Mon Jul 02 10:38:18 2012 -0700" }, "message": "mako: touch: added tool type and touch minor option\n\n- Let the low level driver pass tool type and use it\n (Synaptics: PEN when major \u003d 0, minor \u003d 0, Other: FINGER)\n- Split touch major and minor value to choose\n circle vs. ellipse from platform datai\n (Currently defined to support circle)\n\nChange-Id: Ibd79efb5d88843174c45147a4c7ea170632c3fdb\n" }, { "commit": "5dd5442cd6e726430ab5294149f1cff0a33ce6a2", "tree": "1b1b44ff9b433f942ece01d256a20b11ff40a815", "parents": [ "1d22dfa0b050d09fc589af90b8d35f32a5dc3056" ], "author": { "name": "Nishant Pandit", "email": "npandit@codeaurora.org", "time": "Tue Jun 26 22:52:44 2012 +0530" }, "committer": { "name": "Nishant Pandit", "email": "npandit@codeaurora.org", "time": "Sat Jun 30 03:27:54 2012 +0530" }, "message": "msm: camera: Add support for concurrent Ispif interface streaming\n\nAdd support for multiple ispif interfaces streaming concurrently.\nPIX abd RDI interface can stream at same time or two RDI interfaces\nmay stream at one time depending on usecase\n\nChange-Id: Ib3cef418cd2816bc19891c1855e1dcae5a2a55a1\nSigned-off-by: Nishant Pandit \u003cnpandit@codeaurora.org\u003e\n" }, { "commit": "1d22dfa0b050d09fc589af90b8d35f32a5dc3056", "tree": "85e2da6c70c230681ae2aa7f31e6339f2e9c4b68", "parents": [ "8724934818b1d9f6f13f3e07a3b3ffd66fb7532e", "d4158d253a1993af1faf103575045350313caeda" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 29 12:16:57 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 29 12:16:57 2012 -0700" }, "message": "Merge changes I2bb0954d,Icdbbebb9,I659b133b,Id51bc882,I59917adc,Ia67eaee0,I8e82434b,I1f112fa3 into msm-3.4\n\n* changes:\n mm: mmzone: MIGRATE_CMA migration type added\n mm: page_alloc: change fallbacks array handling\n mm: page_alloc: introduce alloc_contig_range()\n mm: compaction: export some of the functions\n mm: compaction: introduce isolate_freepages_range()\n mm: compaction: introduce map_pages()\n mm: compaction: introduce isolate_migratepages_range()\n mm: page_alloc: remove trailing whitespace\n" }, { "commit": "8724934818b1d9f6f13f3e07a3b3ffd66fb7532e", "tree": "650784cbb330e8cae012af79f11b62d80f603970", "parents": [ "f707d8d022002cf28a0066b4548c932ebf1e74b5", "1bc7b22825ee72017f7519215f0aa5144d75a9c7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 29 12:16:48 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 29 12:16:48 2012 -0700" }, "message": "Merge \"msm: camera: Allow user to abort live snapshot.\" into msm-3.4" }, { "commit": "c539dab74e34bd1520007bfee96ab4fadb272caf", "tree": "f85dbeb0d403e6b077618e432f6be350e5281e70", "parents": [ "68103b8a5f0572637ceb5a026c6b469c9c5fa194", "2aa4c04acd71981890316d00402dc353c8a2bb7e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 29 12:14:18 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 29 12:14:18 2012 -0700" }, "message": "Merge \"ASoC: Handle slimbus port disconnection before opening another\" into msm-3.4" }, { "commit": "4803f47694a20e4f0adce65cf3a866b421e7952e", "tree": "24eea8282a509dfee7ad49c278c7830d1c8f1821", "parents": [ "18d767915c0b91846d20510530faba8a7fc53acd", "c00dd9ba47857a37cf656c8e214635b1e79cadc2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 29 04:34:08 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 29 04:34:08 2012 -0700" }, "message": "Merge \"diag: Add new SSID\" into msm-3.4" }, { "commit": "2b3d98df73fe2fcbc026be1c4a1c3e378c33420a", "tree": "fbaeb5ea3b18c96b083b45425eea6e53d1415823", "parents": [ "680f7aa4e55ed8b4bfdc5dbb07a225130149e9c2", "da31824a3b52bde102a0f3c4ac621c3487ea88e1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 29 04:06:11 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 29 04:06:11 2012 -0700" }, "message": "Merge \"Bluetooth: Use transmit window from config response for ack timing\" into msm-3.4" }, { "commit": "ef38094d89e5e0ccffff3edbea65d86661e7acb6", "tree": "3d720202609e501354caba49a4f54154154729fb", "parents": [ "4b27cbe34ef974a4bcd415d2bf9399724e0ef0e9", "6fb38343372bd12a12711f27da989b0691281925" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 23:13:48 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 23:13:48 2012 -0700" }, "message": "Merge changes I506d5872,I5f9b1279,I6f98f319 into msm-3.4\n\n* changes:\n coresight: rename variables and functions from cs to coresight\n coresight: rename directory and files from cs to coresight\n cs: rename driver state data to drvdata and dynamically allocate it\n" }, { "commit": "4b27cbe34ef974a4bcd415d2bf9399724e0ef0e9", "tree": "dc89578f14a3da4ef2108ade8470bc2998f14f1a", "parents": [ "9690378be5be50bdf767b9c976cba0b44df1e855", "a9c0e0673867c346cebe7904874f6cb5cc5af67c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 23:13:38 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 23:13:38 2012 -0700" }, "message": "Merge changes I3c3c58de,If73198f2 into msm-3.4\n\n* changes:\n cs: use device attributes instead of kobj attributes\n cs: let each driver manage the clk for its device\n" }, { "commit": "9690378be5be50bdf767b9c976cba0b44df1e855", "tree": "f1988badeac2a6feed98b97d5d0ea51544929687", "parents": [ "b75f6e53773221505c5a90564315b597201ec6d3", "b84ef9df296454f010c0d0ee37351338944d9848" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 23:13:28 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 23:13:28 2012 -0700" }, "message": "Merge changes Ieddc3dd3,I6f83d281 into msm-3.4\n\n* changes:\n cs: add coresight core layer code\n cs: rename and move stm header file\n" }, { "commit": "b75f6e53773221505c5a90564315b597201ec6d3", "tree": "20cda486de90d220ab4d07e0a3ab0c0ae6b759a6", "parents": [ "ab0cd209206e566e14d55c3ba8530d3032bc618c", "5827c83b6bddfe15aa795f7906f29637e31aaf9a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 23:13:18 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 23:13:18 2012 -0700" }, "message": "Merge changes I722de994,I546ba939 into msm-3.4\n\n* changes:\n msm: jtag: move jtag related definitions to new jtag header\n cs: move shared data to external header\n" }, { "commit": "e0768bbb446aeccdf6034000c342d6e0614f0249", "tree": "b78f4a2fb45e1f346d784f2fe4257359ac78903d", "parents": [ "d0ea322ca8ea2b8532b3424b786b5566f7344b5e", "33454d2a05cd130f648e6f454e5878ff7f9713c4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 23:13:01 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 23:13:01 2012 -0700" }, "message": "Merge \"cs: rename qdss files to coresight\" into msm-3.4" }, { "commit": "d0ea322ca8ea2b8532b3424b786b5566f7344b5e", "tree": "a036f991e7d3bf67a5bb06a0f7dfc42ee53caacf", "parents": [ "a168dfc19b411bcaa9dcce83d24dbdd912d91d22", "42b01a9bf261d0b7ba33045aa44e744fe55f6904" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 23:12:59 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 23:12:59 2012 -0700" }, "message": "Merge \"msm: Remove pmem_kalloc APIs\" into msm-3.4" }, { "commit": "420825a566465478efc03cd937a1401a9fa1d691", "tree": "7142ba1fb92d4c57fa3190fde1ee8af285b7b738", "parents": [ "b0a55c8299652d9da1e7b9274bcb58f9af4fd151" ], "author": { "name": "Jongrak Kwon", "email": "jongrak.kwon@lge.com", "time": "Tue Jun 26 16:33:25 2012 -0700" }, "committer": { "name": "Devin Kim", "email": "dojip.kim@lge.com", "time": "Thu Jun 28 21:16:52 2012 -0700" }, "message": "mako: touch: disable ghost finger correction\n\nThe ghost function sets FORCE_FAST_RELAXATION and\nFORCE_UPDATE registers, which cause touch abnormal function\nafter resume.\n\nAlso code clean up for register map initialization.\n\nChange-Id: Ib442d4d7a2e995048fba902fe852a3851fdbf418\n" }, { "commit": "098aa9d3f2cd0478fb1ec4a9e29efc3bf41394c5", "tree": "9675647bce647786ffdec07c74089ec030e1480f", "parents": [ "b849941ec8883a3228a751fac38b48caa7ce1862" ], "author": { "name": "Jongrak Kwon", "email": "jongrak.kwon@lge.com", "time": "Tue Jun 26 11:53:27 2012 -0700" }, "committer": { "name": "Devin Kim", "email": "dojip.kim@lge.com", "time": "Thu Jun 28 21:16:25 2012 -0700" }, "message": "mako: touch: use MT protocol type B\n\n- not applied to hard key function, so removed hard key stuff\n- jitter and accuracy filter function also changed but not used at the moment\n- corrected some wrong error handling in touch_probe and synaptics_ts_probe\n\nChange-Id: I1af3032612cdedbfac9da9c5df17eeb861344226\n" }, { "commit": "b849941ec8883a3228a751fac38b48caa7ce1862", "tree": "1cf423bf7563dae37db4ac4dce9277c920cdd1b9", "parents": [ "3c4707742bf6ee715ae0b9ae65d67b82e9dfc935" ], "author": { "name": "Jaeseong GIM", "email": "jaeseong.gim@lge.com", "time": "Tue Jun 26 10:36:57 2012 -0700" }, "committer": { "name": "Devin Kim", "email": "dojip.kim@lge.com", "time": "Thu Jun 28 21:16:19 2012 -0700" }, "message": "mako: debug: porting lge crash handler\n\nChange-Id: I913d372131a25bb9c0d90680f5e96cebb8883055\n" }, { "commit": "9627b3dd1b50d3079e5a8d7d9712444442411096", "tree": "eb2e916488b25812b088f21530188f3b3ca431ea", "parents": [ "ba0e94576be8fcd9386e49f10f84fc671560abea" ], "author": { "name": "Devin Kim", "email": "dojip.kim@lge.com", "time": "Thu Jun 21 14:23:53 2012 -0700" }, "committer": { "name": "Devin Kim", "email": "dojip.kim@lge.com", "time": "Thu Jun 28 21:09:29 2012 -0700" }, "message": "cradle: add hall ic driver\n\nsupport hall ic (BU52031NVX) for cradle\n\nChange-Id: I1de44a0c1d5ab1359fc1a02eb674b08be8590100\n" }, { "commit": "2aa4c04acd71981890316d00402dc353c8a2bb7e", "tree": "9ad25491e5f429dc0339a0ed93f85f7d0524c3a0", "parents": [ "39c6c645e779aedc0268dd07013672c0884d3562" ], "author": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Tue Jun 26 13:08:45 2012 -0700" }, "committer": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Thu Jun 28 18:06:20 2012 -0700" }, "message": "ASoC: Handle slimbus port disconnection before opening another\n\nProblem Description:\nOpen and close the same set of slimbus ports after\ncertain iterations will fail port open, as that port\nwas not disconnected successfully.\n\nFix Description:\nHandle sequence of closing slimbus ports. Store\nthe channel masks associated with each codec dai\nand reset them after they are closed from slimbus\nThen, release the close slimbus port event, after\nall the channels are closed completely\n\nChange-Id: Ie14b9f0920b37f905151b48f18df181503acc21d\nCRs-fixed: 370761\nSigned-off-by: Swaminathan Sathappan \u003cSwami@codeaurora.org\u003e\n" }, { "commit": "6381ae7bba52db99284cccdc9a9efbcf69388930", "tree": "e431c028200c2c4933b1e14c204a693a4d883567", "parents": [ "89443dc3f74ff0e45a4c1fee096d576a082bef69", "c432fdf28656051f358ff4b7cc41f43d4eeb3ed8" ], "author": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Thu Jun 28 17:56:11 2012 -0700" }, "committer": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Thu Jun 28 17:56:11 2012 -0700" }, "message": "Merge remote-tracking branch \u0027coreaurora.org/msm-3.4\u0027 into android-msm-mako-3.4-wip\n\nConflicts:\n\tdrivers/video/msm/mdp.h\n\tsound/soc/msm/apq8064.c\n\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n" }, { "commit": "42b01a9bf261d0b7ba33045aa44e744fe55f6904", "tree": "f2411ec35a289962002e07baefb59ad8f208dc0b", "parents": [ "2d574694a6fd3f7cb2014105f00524f9da71459c" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Mon Jun 11 17:35:15 2012 -0700" }, "committer": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Thu Jun 28 13:40:57 2012 -0700" }, "message": "msm: Remove pmem_kalloc APIs\n\nAll clients are now migrated from the pmem_kalloc APIs. Remove\nreferences to these APIs so no one can call them.\n\nChange-Id: I8cc388c347d48a20525efbb2f42e1065cbbc44e6\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "6fb38343372bd12a12711f27da989b0691281925", "tree": "95322fb87186ba3fc26a56f55254b11cd470802f", "parents": [ "1746b8fbfc2e636cffd7233f27d5354ed33e8adf" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sun Jun 03 14:51:38 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:27 2012 -0700" }, "message": "coresight: rename variables and functions from cs to coresight\n\nComplete the rename by changing cs to coresight for variables,\nfunctions and constants.\n\nChange-Id: I506d5872e5c09f201c4f3674d7722d36eca26921\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "b84ef9df296454f010c0d0ee37351338944d9848", "tree": "4fb2853d0434445f44b947070b4f5e154e43766a", "parents": [ "05490936e6dbcf7a6002880a9528a37b3aa1e800" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu May 24 14:01:43 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:26 2012 -0700" }, "message": "cs: add coresight core layer code\n\nSupport for CoreSight core layer apis that will be used by other\nCoreSight drivers.\n\nChange-Id: Ieddc3dd362ee8e641abc557153d0a3e38aa9beab\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "1746b8fbfc2e636cffd7233f27d5354ed33e8adf", "tree": "bb0d2295861a0d7a84b73a53897b163967e867d4", "parents": [ "16aefdb7717d51445046d7cfbe48336026265188" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sat Jun 02 21:11:41 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:26 2012 -0700" }, "message": "coresight: rename directory and files from cs to coresight\n\nSince cs is not a well known acronym for CoreSight, rename\ndirectory and files from cs to coresight.\n\nChange-Id: I5f9b12794b80b1c01c9ce0621d53ee6be408a361\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "f17b147caf2b5cf3a5033b1cdd29506b06797050", "tree": "cdab43fe4c6152ce338402f12c80dcd09091bc19", "parents": [ "b84ef9df296454f010c0d0ee37351338944d9848" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Fri May 25 22:23:52 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:26 2012 -0700" }, "message": "cs: let each driver manage the clk for its device\n\nEach device driver manages its own clk by using the clk apis that\nnow support CoreSight clock. Remove qdss clock wrapper functions\nand their usage.\n\nChange-Id: If73198f273f69e5525a6444e7a7c277c20c96111\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "5827c83b6bddfe15aa795f7906f29637e31aaf9a", "tree": "db407505cc159e249e24f244d42d1c2facc81dac", "parents": [ "43e47bd4a9c92bd8aa1dd6ead5ed6c13c880005a" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sat May 19 19:24:49 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:25 2012 -0700" }, "message": "msm: jtag: move jtag related definitions to new jtag header\n\nCreate new jtag header file and move jtag related definitions to\nit. This will decouple jtag code and help make coresight code\ngeneric.\n\nChange-Id: I722de9945800a4d0ba5b792c1b6dda5fc0b3cc40\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "33454d2a05cd130f648e6f454e5878ff7f9713c4", "tree": "52a199967e7edd3736913a5809274a2845df8aa1", "parents": [ "2963de4b7704a0b9b8c9c199534ca0ab9ab273e8" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Fri May 18 10:48:17 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:25 2012 -0700" }, "message": "cs: rename qdss files to coresight\n\nAs part of creating generic coresight driver code, rename qdss\nto coresight.\n\nChange-Id: I18f32ca96bb5c2e7ca540f592871e9942f2188e4\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "05490936e6dbcf7a6002880a9528a37b3aa1e800", "tree": "ead6c6c4192567352f035566644956955c051113", "parents": [ "5827c83b6bddfe15aa795f7906f29637e31aaf9a" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sun May 20 18:20:19 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:25 2012 -0700" }, "message": "cs: rename and move stm header file\n\nTo support generic coresight driver, move stm header file from\nmach-msm to include/linux\n\nChange-Id: I6f83d28156fac72a2c35637b7f9b9b58d10d964d\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "43e47bd4a9c92bd8aa1dd6ead5ed6c13c880005a", "tree": "9dadb56a1c0f2f874d1eee061a4831442b5774fc", "parents": [ "33454d2a05cd130f648e6f454e5878ff7f9713c4" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sat May 19 18:10:55 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:25 2012 -0700" }, "message": "cs: move shared data to external header\n\nMove common shared data to external coresight header file.\n\nChange-Id: I546ba939ef7d3d746cd171802498da5be872c234\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "2963de4b7704a0b9b8c9c199534ca0ab9ab273e8", "tree": "13a2dbe1fc3bc1987aee5cb244f4514ce8e146c6", "parents": [ "27086d9e854d8d6ac5b529c1deb43c94c6591bfe" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu May 17 12:43:40 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:24 2012 -0700" }, "message": "cs: move qdss code under drivers\n\nIn preparation to create generic coresight drivers code move\nexisting qdss code under drivers/cs and include/linux\n\nChange-Id: If7697a9961006fe94818e32d19aea75c56ce225d\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "1bc7b22825ee72017f7519215f0aa5144d75a9c7", "tree": "39a39eb772183f383d2c2029d853aeb9d0c2db21", "parents": [ "f913a5f9ec86ff58ae39aeadaada2729abfec6cf" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Sat Jun 23 16:28:11 2012 -0700" }, "committer": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Thu Jun 28 11:37:36 2012 -0700" }, "message": "msm: camera: Allow user to abort live snapshot.\n\nDue to some reason, user can decide to abort a live\nsnapshot while it is in progress. Add support to stop\nthe VFE write masters right away so that the VFE\nstops writing on the buffers allocated by the user.\nAlso send an ACK message to userspace once we get\nconfirmation from VFE that it has stopped using\nthe buffers.\n\nCRs-Fixed: 373080\nChange-Id: Ia4d9134298dd3a1a51f5829f9bcc2b80d6f21d0f\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "da31824a3b52bde102a0f3c4ac621c3487ea88e1", "tree": "57ffc985ebc14fbeeb4f44a66a959efb977f7121", "parents": [ "578a621707dac9772a1d7a4097d6bea229fe25dd" ], "author": { "name": "Mat Martineau", "email": "mathewm@codeaurora.org", "time": "Fri Jun 22 11:36:18 2012 -0700" }, "committer": { "name": "Mat Martineau", "email": "mathewm@codeaurora.org", "time": "Thu Jun 28 09:11:01 2012 -0700" }, "message": "Bluetooth: Use transmit window from config response for ack timing\n\nThis change addresses an L2CAP ERTM throughput problem when a remote\ndevice does not fully utilize the available transmit window.\n\nThe L2CAP ERTM transmit window size determines the maximum number of\nunacked frames that may be outstanding at any time. It is configured\nseparately for each direction of an ERTM connection. Each side sends a\nconfiguration request with a tx_win field indicating how many unacked\nframes it is capable of receiving before sending an ack. The\nconfiguration response\u0027s tx_win field shows how many frames the\ntransmitter will actually send before waiting for an ack.\n\nIt\u0027s important to trace both the actual transmit window (to check for\nvalidity of incoming frames) and the number of frames that the\ntransmitter will send before waiting (to send acks at the appropriate\ntime). Now there are separate tx_win and ack_win values. ack_win is\nupdated based on configuration responses, and is used to determine\nwhen acks are sent.\n\nCRs-fixed: 370909\nChange-Id: I6d9ef55a2ff2f5f3d0117ad376a09e4cc26fe742\nSigned-off-by: Mat Martineau \u003cmathewm@codeaurora.org\u003e\n" }, { "commit": "66f781ab03d1fecfa9945a2872f16cdceeb25aa0", "tree": "81ca154b114252c92824accfa5adee1ac4112d5d", "parents": [ "8f8468997edb2ceb3ba31168beb173d94b754928" ], "author": { "name": "Srikanth Uyyala", "email": "suyyala@codeaurora.org", "time": "Wed Jun 13 23:23:25 2012 +0530" }, "committer": { "name": "Srikanth Uyyala", "email": "suyyala@codeaurora.org", "time": "Thu Jun 28 15:39:52 2012 +0530" }, "message": "ASoC: msm: DTS playback support\n\nCompressed driver changes for the DTS support\n\nChange-Id: I595e638da78cced02142f4ee430afb7357eb336c\nSigned-off-by: Srikanth Uyyala \u003csuyyala@codeaurora.org\u003e\n" }, { "commit": "8f8468997edb2ceb3ba31168beb173d94b754928", "tree": "fe5a3ec9ee576aca7e101e101945a2ccf2d7e307", "parents": [ "578a621707dac9772a1d7a4097d6bea229fe25dd" ], "author": { "name": "Subhash Chandra Bose Naripeddy", "email": "snariped@codeaurora.org", "time": "Tue Jun 12 11:29:18 2012 -0700" }, "committer": { "name": "Srikanth Uyyala", "email": "suyyala@codeaurora.org", "time": "Thu Jun 28 15:39:05 2012 +0530" }, "message": "ASoC: msm: Add compressed TX support\n\nThere is use case that the HDMI input goes through MI2S\nTX interface to ADSP. Add compressed TX support for\nthis use case.\n\nChange-Id: I510e3e63b68ea1887e4c99ebf1c6f76112abbed5\nSigned-off-by: Subhash Chandra Bose Naripeddy \u003csnariped@codeaurora.org\u003e\n" }, { "commit": "3cfe310bac87869e702371482d2461010a1895c1", "tree": "e0fce6ebf22e13f6b1a8beb405694b10ccaf58a6", "parents": [ "8c2e486c0b36759a26aa2db87568c010358cea5f", "73ec728288b1d30c3b967a378d0f2893d254bd67" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 23:10:20 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jun 27 23:10:20 2012 -0700" }, "message": "Merge \"msm: camera: CPP driver Framework\" into msm-3.4" }, { "commit": "dcab3c9c5580a0f359c1bd06f709c52696e65d8b", "tree": "e1af4bdc1b314c47264c735099ba50f190e297fe", "parents": [ "e2748bf57b8704113763c3b92848569cab316fd9", "59d890ff84c431d1cf56118ba0c5892b7d9b7a06" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 17:55:32 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jun 27 17:55:32 2012 -0700" }, "message": "Merge \"power_supply: add change the scope property\" into msm-3.4" }, { "commit": "3595cb5571a69f7ad5fe0cae5a3bfcf9b9b6c502", "tree": "110a5f10c1f0f307504fe6ce01e59c4939c45db6", "parents": [ "ce07e75b88fc88edb78b68d3c0d82fe57a920e9f", "6018155a6fc3ac65f929cecf04708f48f4af6aba" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 16:22:53 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jun 27 16:22:53 2012 -0700" }, "message": "Merge \"block: Add test-iosched scheduler\" into msm-3.4" }, { "commit": "ce07e75b88fc88edb78b68d3c0d82fe57a920e9f", "tree": "7f363609c6a1965dddc69e944bdccaadd0a390dc", "parents": [ "57127555a95c17071d3449ec7c9a4a14a4f77cda", "f4ab0df951634c81bed7725adde5d3ad5921f595" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 16:22:51 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jun 27 16:22:51 2012 -0700" }, "message": "Merge \"ASoc: msm: Add support for audio recording with EC.\" into msm-3.4" }, { "commit": "73ec728288b1d30c3b967a378d0f2893d254bd67", "tree": "174218b7242da91e63c438206d19b28ef900169d", "parents": [ "01d89d9fce207d7335690eedf8c61b1cfddb4c14" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Thu Jun 07 01:32:00 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 15:34:37 2012 -0600" }, "message": "msm: camera: CPP driver Framework\n\nInitial commit for Camera Post Processor Driver.\nThe driver contains frame queuing and process logic\nusing v4l2 framework.\n\nChange-Id: I283c11c3de3bd121b9c3ea5af1446c13e188d329\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "ec9e7c9d6d955252f7758f64e9b8a6b7b324a68d", "tree": "883b4777f8ffa6ebed3bba761f7bccf91d19c33f", "parents": [ "dacb74db78c7436f04a03336942a543efd8baaef", "5bd795f574f290f1ec693d3b1ea5bb2df49fdbc6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 14:29:34 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jun 27 14:29:34 2012 -0700" }, "message": "Merge changes Ic76123dc,Ia4d4a5f6,I2b727686,I88776b30,Ic20caeb4,Ibe7b1228,Id1d64070,I28eca35d,I94faf950,I18f9397e,I1c73c88b,I97375599 into msm-3.4\n\n* changes:\n defconfig: msm-copper: Enable CONFIG_GPIO_QPNP_PIN\n dt/msmcopper: Add devices for pm8x41 mpps\n gpio: qpnp-pin: Add support for MPP devices\n gpio: qpnp-pin: Don\u0027t fail pin config for no hardware support\n gpio: qpnp-gpio: Issue lookups based on device name\n spmi: Add spmi_resource for non spmi-dev-container cases\n gpio: qpnp-gpio: Rename driver to qpnp-pin\n of: spmi: Add support for device naming and lookups\n of: spmi: Support resource naming\n spmi: qpnp: Change APIs to take a spmi_resource pointer instead of index\n spmi: Rename qpnp library to be part of the spmi framework\n defconfig: msm-copper: Enable CONFIG_QPNP_INT\n" }, { "commit": "0e161b18a93e36e9d0d9ba0150e4980227d80480", "tree": "fe77669caae25948df88916a3bed551e3f0270c2", "parents": [ "15799ef9433580a1b999b9b1bd015f4dcff75e94", "519e42033c46bf9d9d1eec4658ea71c793c9c183" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 14:28:57 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jun 27 14:28:57 2012 -0700" }, "message": "Merge changes I8fd819ae,I19fa5017 into msm-3.4\n\n* changes:\n Revert \"arm: irq: Allow for specification of no preallocated irqs\"\n irqdomain: Port system to new API\n" }, { "commit": "430dbc29e559a2d32f1733173ce6ccc7e0bdbf31", "tree": "a0d316b907768b371bbad48493136be120123fb7", "parents": [ "01d89d9fce207d7335690eedf8c61b1cfddb4c14", "f950e320ee1e717b33c6ca7fbed7efe34beb07cf" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 14:27:44 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jun 27 14:27:44 2012 -0700" }, "message": "Merge \"radio-iris: Add ioctl commands to configure spur table\" into msm-3.4" }, { "commit": "5f3f973b98aa2ef281f98805c9472c6a97dde011", "tree": "bd81bdbce60957e5d52179ac5492c44ba116d074", "parents": [ "e547fea475a35fdca93d4cd387c4ca19b68e5b5f", "a0d56b574b8d217b5aecde623da475596db35918" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 12:47:35 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jun 27 12:47:35 2012 -0700" }, "message": "Merge \"radio: tavarua: Add IOCTL to enable the FM TX Tone generator\" into msm-3.4" }, { "commit": "7950179492475d1c37a712ed41c4777fc4552321", "tree": "337adea2603d80632330dc840721161b81ce9d78", "parents": [ "fc65cff3b925046e55bc66d401fcca16682036ec", "f9925653036df749a86396907f802c44d7fae260" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 10:12:07 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jun 27 10:12:07 2012 -0700" }, "message": "Merge \"ASoC: msm: Update the encode option and sample rate.\" into msm-3.4" }, { "commit": "f9925653036df749a86396907f802c44d7fae260", "tree": "32802b69f4cdc574c30e42b93f1441b9f1331ab6", "parents": [ "721c0852922066d8fc76b2dbf9bf2558dd0d3885" ], "author": { "name": "Aviral Gupta", "email": "aviralg@codeaurora.org", "time": "Thu Jun 14 00:51:19 2012 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 05:53:19 2012 -0600" }, "message": "ASoC: msm: Update the encode option and sample rate.\n\nPopulate the sample rate, encode option in wma config params.\n\nCRs-Fixed: 367243, 367242\nChange-Id: Ieeb9d302454d3935faa51cac77021e7c1d77012c\nSigned-off-by: Aviral Gupta \u003caviralg@codeaurora.org\u003e\n" }, { "commit": "6018155a6fc3ac65f929cecf04708f48f4af6aba", "tree": "0137bac74c256816a372adce2e8d534b4a2329b6", "parents": [ "378288489d0b6cca782429154872a6dd070ae5e5" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Wed Jun 27 11:25:26 2012 +0300" }, "committer": { "name": "Lee Susman", "email": "lsusman@codeaurora.org", "time": "Wed Jun 27 14:11:12 2012 +0300" }, "message": "block: Add test-iosched scheduler\n\nThe test scheduler allows testing a block device by dispatching\nspecific requests according to the test case and declare PASS/FAIL\naccording to the requests completion error code\n\nChange-Id: Ief91f9fed6e3c3c75627d27264d5252ea14f10ad\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "ca4d9bc194188395050a1358db4a73a880299084", "tree": "9010a8df2a84349047b9e0f4e424cd4cf40e292b", "parents": [ "721c0852922066d8fc76b2dbf9bf2558dd0d3885" ], "author": { "name": "Mayank Chopra", "email": "makchopra@codeaurora.org", "time": "Wed Jun 27 15:30:19 2012 +0530" }, "committer": { "name": "Mayank Chopra", "email": "makchopra@codeaurora.org", "time": "Wed Jun 27 15:45:52 2012 +0530" }, "message": "Revert \"msm: rotator: Add secure session flag to rotator start data\"\n\nThis reverts commit 32200301c56b5f8490dc199e4f16b790c879bdf4.\n\nChange-Id: I25836b3f88f1b022e5190be70ebbf471692091db\nSigned-off-by: Mayank Chopra \u003cmakchopra@codeaurora.org\u003e\n" }, { "commit": "a0d56b574b8d217b5aecde623da475596db35918", "tree": "08eab29fc0dfc7c299b7120b172917161014d0f3", "parents": [ "c432fdf28656051f358ff4b7cc41f43d4eeb3ed8" ], "author": { "name": "Ayaz Ahmad", "email": "aahmad@codeaurora.org", "time": "Tue Jun 26 15:58:41 2012 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jun 26 22:43:03 2012 -0600" }, "message": "radio: tavarua: Add IOCTL to enable the FM TX Tone generator\n\nImplement IOCTL to set the Internal FM TX Tone\ngenerator values\n\nChange-Id: I2a94d5559a90362b9439ea510e98489102ed0c04\nCRs-Fixed: 356789\nSigned-off-by: Ayaz Ahmad \u003caahmad@codeaurora.org\u003e\n" }, { "commit": "12eac47a850b6e3c05c7784c20f0d7e2a0933a62", "tree": "0ab5587ba1c85fcc0cacb1331c1e4f66e829a1a9", "parents": [ "63a62680846210d1a00d6e449e7387755e6f6142", "8e6edcb2caa638263600be246fe908d9f4b62040" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jun 26 21:37:07 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jun 26 21:37:07 2012 -0700" }, "message": "Merge \"usb: ehci: Avoid phy lockup due to SOFs during port reset\" into msm-3.4" }, { "commit": "36417202f7edd2d00d5cf3e55e2ad01188d82d6f", "tree": "40f61f2bccd03f43e856dd2419646afe6595510e", "parents": [ "cd38b8212061d9a63e9cf66021483a9c7493e2f3", "eaf59b4cfe1678f7c7423e12b72bd8c794eb15f9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jun 26 21:36:44 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jun 26 21:36:44 2012 -0700" }, "message": "Merge \"ASoc: msm: Add support for AAC and WMA decoders.\" into msm-3.4" }, { "commit": "cd38b8212061d9a63e9cf66021483a9c7493e2f3", "tree": "da602c0eda75082697702e49aa9c8275f617b0ee", "parents": [ "3b43c1b0bf49270fa515991a92ea21e7d7f32188", "708d577763f577de01654e3c5df92d1141490976" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jun 26 21:36:42 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jun 26 21:36:42 2012 -0700" }, "message": "Merge \"mmc: host: Give a unique number to each CAPS2 capability\" into msm-3.4" }, { "commit": "59d890ff84c431d1cf56118ba0c5892b7d9b7a06", "tree": "eaed4e0d43d4cfc339d14c9beba1f71b2cc987ae", "parents": [ "9daf6dcad633c3cf7cd32c86d6eba895d35f5a72" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Jun 26 11:19:17 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Jun 26 14:06:49 2012 -0700" }, "message": "power_supply: add change the scope property\n\nThe scope property indicates the operating mode of the system. This\nproperty could be used to switch to and from usb host mode.\n\nAdd a helper api to update this property.\n\nCRs-Fixed: 373365\nChange-Id: I5fb57f7b1075276ba90b0f7e0a44626e07ee196f\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "8e6edcb2caa638263600be246fe908d9f4b62040", "tree": "3a93726a7132a48d488289747990b565cce16d04", "parents": [ "64b4861fcee2f4adbe81551643f2e5dd7d30d5c7" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Wed Jun 20 18:08:50 2012 -0700" }, "committer": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Tue Jun 26 12:52:44 2012 -0700" }, "message": "usb: ehci: Avoid phy lockup due to SOFs during port reset\n\nThere could be race condition between h/w initiating sof\n(start of frames) and finishing port reset. This can\ncause hsic phy lockup, which results in enumeration failure.\nAvoid this race condition by:\n1. Moving to the old enumeration sequence where set_address is\ninitiated before get_device descriptor. This results in one\nport reset instead of two port resets.\n2. Halt usb controller before initiating port reset and start it after\nport reset is complete. This is tricky because PORT_RESET bit\nautomatically clears when h/w completes the reset and failure to\nstart the controller within 3ms causes the peripheral device to\nsuspend resulting in enumeration failure. Hence, after setting\nport reset bit forcefully drive strobe/data lines to reset using\nulpi interface and once port reset is complete, disable forceful\nreset and start the controller in atomic context.\n\nCRs-fixed: 364458, 359930\nChange-Id: I49a2eac8043eb3001956c7ee9ead2c3a901524db\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "708d577763f577de01654e3c5df92d1141490976", "tree": "6e0a6820d75ccbfd6a9d7bf0f9fa622e806e8947", "parents": [ "63e6e20a39c7636d81cd1912ccb114ed9830eeaa" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Tue Jun 26 07:43:38 2012 +0300" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jun 26 12:59:04 2012 -0600" }, "message": "mmc: host: Give a unique number to each CAPS2 capability\n\nMMC_CAP2_POWER_OFF_VCCQ_DURING_SUSPEND and MMC_CAP2_PACKED_RD are defined\nto the same value. Needs to give each one of them a unique number.\n\nChange-Id: I5f55396075fbffdae305122cd8fbb9f4b056c751\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "6b901571a6c0700f5a40666a3972dbaee67964f1", "tree": "d7680a47786b8840e462cbdc17151f040a6203ec", "parents": [ "58d07801a47643e162168ff362cf23d0de86171b" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Wed May 30 13:32:24 2012 -0700" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Tue Jun 26 10:35:19 2012 -0700" }, "message": "gpio: qpnp-pin: Add support for MPP devices\n\nAdd mpp support to the qpnp-pin driver. MPP support allows for\nadditional devices to be specified in the Device Tree topology.\nThis support is implemented in the same driver as the GPIO\nsupport since the address map is very close between them.\nThe addition of this support does not change the existing gpio\nsupport.\n\nDefault MPP configuration can be specified in the Device Tree\nusing the three new bindings for mpp. Any attribute not specified\nin the Device Tree will assume its default configuration.\n\nIt\u0027s also possible to configure an MPP at runtime using the\nexisting qpnp_pin_config() API. If a given configuration feature\nis not supported by the underlying hardware pin, then that\nparticular request is silently dropped with no error. This allows\nfor gpio users to continue specifying only a subset of the full\nqpnp_pin_cfg structure.\n\nChange-Id: I2b72768647de2a371edfa05c52fc1ed776c215c0\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "6ea2cd264228d9eeea8396b046db00a416fbba2e", "tree": "286f3a06cba3b7fbadc90964c164f7d35d8b653e", "parents": [ "978d335cee5541033ce66d6ec63a70535b523600" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Tue May 29 15:40:18 2012 -0700" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Tue Jun 26 10:35:18 2012 -0700" }, "message": "gpio: qpnp-gpio: Issue lookups based on device name\n\nqpnp-gpio manages gpio_chip queries based on the slave\nID. This has a limitation in that it restricts the number of\ngpio_chips per slave ID to one. However, some PMICs have both MPP\nand GPIO on the same slave, and thus the slave ID is not a\nmeaningful unit to search for.\n\nInstead, make use of the \u0027label\u0027 binding to give the\nprimary dev-container node a name. This name will serve as the\ngpio_chip label, which can be used in lookups.\n\nChange-Id: Ic20caeb4622d73449a983992275446c733ddd89a\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "978d335cee5541033ce66d6ec63a70535b523600", "tree": "c80940f3ce34edba5e00de19c0ea47e439fd9542", "parents": [ "a05f455aee64cc006c5c26c210c3620ed7f2d660" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Fri May 25 15:02:38 2012 -0700" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Tue Jun 26 10:35:18 2012 -0700" }, "message": "spmi: Add spmi_resource for non spmi-dev-container cases\n\nThe devnode array is currently being used for non\nspmi-dev-container devices as a special case where the number of\ndevnodes is 1. This obfuscates the code and also removes the\nability to store the dev-container\u0027s device resource information,\nsince in that special case the devnode array is dedicated for the\nchild devices.\n\nAdd a new spmi_resource entry used for typical spmi_devices, and\ntreat the devnode array as the special case for\nspmi-dev-container.\n\nAlso add a new API spmi_get_primary_dev_name() to return the name\nof the device assigned with the \u0027label\u0027 binding if it exists.\n\nChange-Id: Ibe7b12285e37bb0529024558550a96d71393bc10\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "a05f455aee64cc006c5c26c210c3620ed7f2d660", "tree": "19295ca6c518452566fea24e1698703d8e6cd519", "parents": [ "8d6aae33e4f6ebe7627acb7f589f56e02dc775bc" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Thu May 24 15:58:11 2012 -0700" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Tue Jun 26 10:35:17 2012 -0700" }, "message": "gpio: qpnp-gpio: Rename driver to qpnp-pin\n\nSince QPNP PMICs also include support for MPP, and since we\nintend to support MPPs in the same code base, it\u0027s not\nappropriate to limit this the scope of this driver to \u0027gpio\u0027.\nChange the driver name to \u0027pin\u0027 since it more accurately\ndescribes the potential for this driver.\n\nAlso update the Device Tree include files for the name changes.\nRemove a superflous \u0027gpio-pin\u0027 definition in the msmcopper\nspecific include file, since such configuration shall never\nchange. This binding should be defined in the PMIC specific\ninclude only.\n\nChange-Id: Id1d6407039908e3cf44dfc19af71f0cdc7aff8e6\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "8d6aae33e4f6ebe7627acb7f589f56e02dc775bc", "tree": "b5af90e4a7c571f52a16ed2894112c807786b3be", "parents": [ "a6a354dd3d5bfbbefb9fc09295be5e31bc67b48b" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Tue May 22 15:41:06 2012 -0700" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Tue Jun 26 10:35:17 2012 -0700" }, "message": "of: spmi: Add support for device naming and lookups\n\nSince we support multiple device_nodes per spmi_device when used\nwith the spmi-dev-container flag, it\u0027s often unclear how a driver\nshould make reference to a particular device. Therefore,\nintroduce the spmi specific binding spmi-dev-name that specifies\nthe device name for the device_node.\n\nAlso introduce an API that can be used from\nthe driver to lookup the specific device node associated with a\nparticular device name.\n\nNote that it may seem at first glance that the binding \u0027label\u0027 is\nredundant with device_node-\u003ename. However, per the ePAPR,\ndevice_node-\u003ename is intended to be as generic as possible,\nrepresenting the function of the device and not the precise\nprogramming model. \u0027label\u0027 is used to give a platform\nspecific name that can be queried from device drivers.\n\nChange-Id: I28eca35d0b625372c26a6d8ad81e7679f200d14b\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "a6a354dd3d5bfbbefb9fc09295be5e31bc67b48b", "tree": "399509d12fe0c6bc2c4574fcc8c354b0b99f9271", "parents": [ "0e5534d92f03c76de4c15736729101520c4f0c3a" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Mon May 21 17:47:11 2012 -0700" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Tue Jun 26 10:35:16 2012 -0700" }, "message": "of: spmi: Support resource naming\n\nreg-names and interrupt-names are standard bindings to map device\ntree reg and interrupt indices to particular names. This way the\ndriver does not need to be concerned with hard coded assignments.\nTherefore, add spmi support for these bindings.\n\nExplicit support for reg-names is required since the\nimplementation does not make use of of_address_to_resource(),\nwhich happens to already support this.\nThis is because of_address_to_resource() mandates address\ntranslation, which is not relevant to spmi.\n\ninterrupt-names is already implicitly handled by\nof_irq_to_resource(), which is used in the spmi implementation.\nAdd additional documentation to state clearly that this binding\nis also supported.\n\nAlso add supporting routines to easily lookup a resource by name\nfor both registers and interrupts.\n\nChange-Id: I94faf950da5106ecd4ff36f47e5b46102d9bd426\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "0e5534d92f03c76de4c15736729101520c4f0c3a", "tree": "bc74e13f707040750e6dd8d77b365e9e1c394442", "parents": [ "08e1e909c7822559e2ca78b3953eb43d0b0c5dcb" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Tue May 22 17:33:45 2012 -0700" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Tue Jun 26 10:35:16 2012 -0700" }, "message": "spmi: qpnp: Change APIs to take a spmi_resource pointer instead of index\n\nPointers are more flexible than index numbers, since index\nnumbers depend upon an additional reference to the array in\nquestion. In particular, we\u0027d like to add a new API to lookup a\ndevnode based on a predefined name in the Device Tree. This API\nwill return a spmi_resource, and so it\u0027s natural to want to use\nthis pointer directly with the other existing APIs.\n\nAlso introduce a new API spmi_for_each_devnode that can be used\nto iterate each spmi_resource in the dev_node array. This\nabstracts the traversal of the array, which was previously done\nwithin the existing APIs.\n\nChange-Id: I18f9397e5d78770e840a9f95dd8061201931df6e\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "08e1e909c7822559e2ca78b3953eb43d0b0c5dcb", "tree": "9eb7d3bb8a7badd403199c27145d243f78396d4b", "parents": [ "7c06410945495fc13caf69d9ad83da0195a7166e" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Wed May 23 10:55:22 2012 -0700" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Tue Jun 26 10:35:15 2012 -0700" }, "message": "spmi: Rename qpnp library to be part of the spmi framework\n\nIt turns out that the only use cases for the qpnp library use\nthe existing spmi data structures. As such, there\u0027s really\nno justification for having the library not be called \u0027spmi\u0027.\nThere is nothing Qualcomm specific about this code.\n\nAlso cleanup some inconsistencies in the Kernel Doc comments\nwhile we\u0027re here.\n\nChange-Id: I1c73c88be740b6f5d38ba2de62de1737981b30fa\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "bb6b30f77bd9f1fada77d38677f37082f8a3f165", "tree": "1626c740fe105a4ebbea1ee2180d14089f42e9f3", "parents": [ "63e6e20a39c7636d81cd1912ccb114ed9830eeaa" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Fri Jun 01 13:33:51 2012 -0700" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Tue Jun 26 10:35:13 2012 -0700" }, "message": "irqdomain: Port system to new API\n\nThe following merge commit chose the irq_domain implementation\nfrom AU_LINUX_ANDROID_ICS.04.00.04.00.126 instead of the version\nin v3.4.\n\ncommit f132c6cf77251e011e1dad0ec88c0b1fda16d5aa\nMerge: 23016de 3f6240f\nAuthor: Steve Muckle \u003csmuckle@codeaurora.org\u003e\nDate: Wed Jun 6 18:30:57 2012 -0700\n\n Merge commit \u0027AU_LINUX_ANDROID_ICS.04.00.04.00.126\u0027 into\n msm-3.4\n\nSince this version is inconsistent with the upstream,\nport the irq_domain framework to the version in v3.4 and\nmakes all necessary changes to clients that are out of spec.\n\nDetails of client ports are below.\n\n-Update the qpnp-int driver for revmap irq_domain API. The revmap\nirq_domain implementation introduces a reverse lookup scheme using\na radix tree. This scheme is useful for controllers like qpnp-int\nthat require a large range of hwirqs.\n\n-Bring the ARM GIC driver up to v3.4, being careful\nto port existing CAF changes.\n\n-Partially port the gpio-msm-common driver to the new irq_domain API.\nEnable the gpio-msm-common driver to work with the new irq_domain\nAPI using a linear revmap. It is not a full port since irq_domain\nis still only registered for Device Tree configurations. It should\nbe registered even for legacy configurations.\n\nIn addition, the irq_domains .map function should be setting all\nthe fields currently done in msm_gpio_probe(). That\u0027s not\ncurrently possible since msm_gpio_probe is invoked\nunconditionally - even from Device Tree configurations.\n\nFinally, gpio-msm-common should be converted into a real\nplatform_device so that probe() is invoked due to driver and\ndevice matching.\n\nChange-Id: I19fa50171bd244759fb6076e3cddc70896d8727b\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "d4158d253a1993af1faf103575045350313caeda", "tree": "531d46fbfc6a9d06c3cdd7f36ddc6dd9620efd93", "parents": [ "c6114bf2a0c067ee77ce240e82694c88a4f31a7e" ], "author": { "name": "Michal Nazarewicz", "email": "mina86@mina86.com", "time": "Thu Dec 29 13:09:50 2011 +0100" }, "committer": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Tue Jun 26 10:32:20 2012 -0700" }, "message": "mm: mmzone: MIGRATE_CMA migration type added\n\nThe MIGRATE_CMA migration type has two main characteristics:\n(i) only movable pages can be allocated from MIGRATE_CMA\npageblocks and (ii) page allocator will never change migration\ntype of MIGRATE_CMA pageblocks.\n\nThis guarantees (to some degree) that page in a MIGRATE_CMA page\nblock can always be migrated somewhere else (unless there\u0027s no\nmemory left in the system).\n\nIt is designed to be used for allocating big chunks (eg. 10MiB)\nof physically contiguous memory. Once driver requests\ncontiguous memory, pages from MIGRATE_CMA pageblocks may be\nmigrated away to create a contiguous block.\n\nTo minimise number of migrations, MIGRATE_CMA migration type\nis the last type tried when page allocator falls back to other\nmigration types when requested.\n\nChange-Id: I2bb0954de8be4f212b03dea0e5a508048684bda2\nSigned-off-by: Michal Nazarewicz \u003cmina86@mina86.com\u003e\nSigned-off-by: Marek Szyprowski \u003cm.szyprowski@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nAcked-by: Mel Gorman \u003cmel@csn.ul.ie\u003e\nReviewed-by: KAMEZAWA Hiroyuki \u003ckamezawa.hiroyu@jp.fujitsu.com\u003e\nTested-by: Rob Clark \u003crob.clark@linaro.org\u003e\nTested-by: Ohad Ben-Cohen \u003cohad@wizery.com\u003e\nTested-by: Benjamin Gaignard \u003cbenjamin.gaignard@linaro.org\u003e\nTested-by: Robert Nelson \u003crobertcnelson@gmail.com\u003e\nTested-by: Barry Song \u003cBaohua.Song@csr.com\u003e\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "4c1ff37656a55618a00d3462bd1631f485a3ee8c", "tree": "3fa7d31768f8a104bf4a1e0ae376e0a992961524", "parents": [ "02ff1deb01f25ce3cdedb52d852974d0d2afe406" ], "author": { "name": "Michal Nazarewicz", "email": "mina86@mina86.com", "time": "Thu Dec 29 13:09:50 2011 +0100" }, "committer": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Tue Jun 26 10:32:20 2012 -0700" }, "message": "mm: page_alloc: introduce alloc_contig_range()\n\nThis commit adds the alloc_contig_range() function which tries\nto allocate given range of pages. It tries to migrate all\nalready allocated pages that fall in the range thus freeing them.\nOnce all pages in the range are freed they are removed from the\nbuddy system thus allocated for the caller to use.\n\nChange-Id: I659b133b1c9991568bfb6bd09c7792e15f2a2bfb\nSigned-off-by: Michal Nazarewicz \u003cmina86@mina86.com\u003e\nSigned-off-by: Marek Szyprowski \u003cm.szyprowski@samsung.com\u003e\nAcked-by: Mel Gorman \u003cmel@csn.ul.ie\u003e\nReviewed-by: KAMEZAWA Hiroyuki \u003ckamezawa.hiroyu@jp.fujitsu.com\u003e\nTested-by: Rob Clark \u003crob.clark@linaro.org\u003e\nTested-by: Ohad Ben-Cohen \u003cohad@wizery.com\u003e\nTested-by: Benjamin Gaignard \u003cbenjamin.gaignard@linaro.org\u003e\nTested-by: Robert Nelson \u003crobertcnelson@gmail.com\u003e\nTested-by: Barry Song \u003cBaohua.Song@csr.com\u003e\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "32f20a70cbcbc8ed0c8e6cb4d3acd10e1c87a5c4", "tree": "9b5b8103807c463dba7cdfd65cccaf08bf94f051", "parents": [ "804ca59d52753b57c6ccb5ced017a018b9f2e64b" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Thu Jun 14 14:41:11 2012 +0530" }, "committer": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Tue Jun 26 14:35:39 2012 +0530" }, "message": "isa1200: Add support for pwm clk\n\nPWM generation mode needs clk to generate internal PWM\nfor vibration. Add clk apis to enable/disable clock as\nneeded.\n\nChange-Id: I2ba591509fc899186bf0ad7069133a9f1d0e6a42\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "f950e320ee1e717b33c6ca7fbed7efe34beb07cf", "tree": "9871515b15a06855adcc3b4169883d31529d09eb", "parents": [ "5d9df02611a53ddaabf3932fa4862e5440d6189e" ], "author": { "name": "Anantha Krishnan", "email": "ananthk@codeaurora.org", "time": "Wed Jun 06 14:25:49 2012 +0530" }, "committer": { "name": "Anantha Krishnan", "email": "ananthk@codeaurora.org", "time": "Tue Jun 26 11:03:20 2012 +0530" }, "message": "radio-iris: Add ioctl commands to configure spur table\n\nProvide interfaces to allow host to update the spur table\nwith spur frequencies specific to platforms.\n\nCRs-Fixed: 352591\nChange-Id: I139ac84a4a45578ebab63c26d7176666d47d3e2a\nSigned-off-by: Anantha Krishnan \u003cananthk@codeaurora.org\u003e\n" }, { "commit": "ee3710f59aca9da946c45335f6b06333ca3b8711", "tree": "44764ac84533ee5a5e133510f26f8be83be51aea", "parents": [ "6eb42e533082256f9587179cadf1e633ad88ba8e", "32200301c56b5f8490dc199e4f16b790c879bdf4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jun 25 19:41:52 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jun 25 19:41:52 2012 -0700" }, "message": "Merge changes Iaf22b758,I522944b8 into msm-3.4\n\n* changes:\n msm: rotator: Add secure session flag to rotator start data\n msm_fb: display: Add DMA and Overlay blt mode address to MDP driver\n" }, { "commit": "f89b8235d7d6daa0eb0f09a13ea3e3363278cd3c", "tree": "b7852992834f54efd87dd7683e4d706c1525ce36", "parents": [ "d6ac8940d66f2c69f467ab7630bdc79d5bebcf69", "28feb3d6001aede64d44f7aa13f364571bb25c5c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jun 25 19:41:44 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jun 25 19:41:44 2012 -0700" }, "message": "Merge \"msm: camera: Add support for RDI in VFE\" into msm-3.4" }, { "commit": "f4ab0df951634c81bed7725adde5d3ad5921f595", "tree": "602ccbcff4d9e94d14e019e645b773d8b861c250", "parents": [ "d6ac8940d66f2c69f467ab7630bdc79d5bebcf69" ], "author": { "name": "Jayasena Sangaraboina", "email": "jsanga@codeaurora.org", "time": "Wed Jun 06 22:38:40 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jun 25 19:03:24 2012 -0600" }, "message": "ASoc: msm: Add support for audio recording with EC.\n\n- Add Mixer controls for Reference Rx device to be\nused as a endpoint2 in adm open for echo cancellation.\n- Add logic to support echo cancellation for audio\nrecording with fluence topology.\n\nChange-Id: I7b83c3fc1a19fef7826bc8c3671e2565e393566a\nSigned-off-by: Jayasena Sangaraboina \u003cjsanga@codeaurora.org\u003e\n" }, { "commit": "a83b1d398396e7b5e1a02c70a262c5bd4e140ec3", "tree": "fc9df155984c6c4ead0934144d0958ba4a99711a", "parents": [ "1bf25ad76c9d94e422ff6fee6a5d825e18692d32", "4e584a304cdf03c4ed7cc28a6457ac22e5d4c688" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jun 25 16:12:07 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jun 25 16:12:07 2012 -0700" }, "message": "Merge changes I7ba57eca,Ib2f49468,I23601760 into msm-3.4\n\n* changes:\n mdss: display: implement csc matrix programming\n mdss: display: add rotator interface to mdss driver\n defconfig: copper: enable mdss in kernel configuration\n" }, { "commit": "de27731b5b7e7a07a8b139a0449087160ff7e60c", "tree": "657a8a25df36ebbb48bf8b84d3439508976a836c", "parents": [ "9daf6dcad633c3cf7cd32c86d6eba895d35f5a72", "877d7a436aba25e186a23a0e827b5ee70027b593" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jun 25 14:28:44 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jun 25 14:28:44 2012 -0700" }, "message": "Merge changes Id7f0e657,Iab5a15e0 into msm-3.4\n\n* changes:\n msm: board-8960: Initialize msm_thermal() during board init\n msm: thermal: Simplify kernel thermal safeguard mechanism\n" }, { "commit": "9daf6dcad633c3cf7cd32c86d6eba895d35f5a72", "tree": "d50477ae93481ffabb4a17e974b46b7c265d0759", "parents": [ "535da5af8b02a047ace4b521a68ea83ba05c3259", "9b6e58bc7b49aca31f1fac08cf640b08a1de4fe2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jun 25 12:36:07 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jun 25 12:36:07 2012 -0700" }, "message": "Merge \"usb: otg: Fix USB remote-wakeup with LPM\" into msm-3.4" }, { "commit": "535da5af8b02a047ace4b521a68ea83ba05c3259", "tree": "f1838664023ee4641971bd71b8c0c41a04fe09bf", "parents": [ "f1d6d411a88c61f4a21a486fbf0167a2b7f2b0ce", "d1760796f3ddc57a5808d9404d4403a43033066c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jun 25 12:35:59 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jun 25 12:35:59 2012 -0700" }, "message": "Merge \"ASoC: msm: Add support for afe disconnect command\" into msm-3.4" }, { "commit": "f1d6d411a88c61f4a21a486fbf0167a2b7f2b0ce", "tree": "52b4b0219d5bad1c00d4d2c7c98822163dad9a73", "parents": [ "ea7701ee131ccc5db140cad4cfdd6a35b949e603", "464cafde0fbea08f0df3f60522f8fdbadc4bfaf2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jun 25 12:35:45 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jun 25 12:35:45 2012 -0700" }, "message": "Merge changes I493263c4,Ib7ab2b67 into msm-3.4\n\n* changes:\n usb-gadget: Initial merge of target module for UASP + BOT\n target: Rename target_allocate_tasks to target_setup_cmd_from_cdb\n" }, { "commit": "d4918cba2686ec8b34aa0ab0d7f9ee71776ad7e5", "tree": "0f7f88714a365423f48396aeb38c79cf20345186", "parents": [ "b4ad112b4006e5bd266f31d0b7d6db22f7347126", "7da88b117a2fb591421e93558413568ca5f61b09" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jun 25 12:35:32 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jun 25 12:35:32 2012 -0700" }, "message": "Merge \"target: add unknown size flag to target_submit_cmd()\" into msm-3.4" }, { "commit": "1857f06647e420c97f9b0e24bb1b77da710d858a", "tree": "034757199393d68c0e1ba169a3d696bde0471307", "parents": [ "400fa571cbd6151dc3beec24919b2fcc5db239e5" ], "author": { "name": "Adrian Salido-Moreno", "email": "adrianm@codeaurora.org", "time": "Tue May 29 17:57:28 2012 -0700" }, "committer": { "name": "Adrian Salido-Moreno", "email": "adrianm@codeaurora.org", "time": "Mon Jun 25 08:42:11 2012 -0700" }, "message": "mdss: display: add rotator interface to mdss driver\n\nAdd rotator session management support with overlay interface using MDP\nflag MDSS_MDP_ROT_ONLY. Overlay interface can only support overlay\nsurface or rotator (written back to memory) but not both.\n\nChange-Id: Ib2f494683b2e6c2fd8c67818df2b57afb82a3df3\nSigned-off-by: Adrian Salido-Moreno \u003cadrianm@codeaurora.org\u003e\n" }, { "commit": "9181436c8d688480ded367557b4b9b012b1881b2", "tree": "a13b38bc1617dda18eb0d1fe69576615f9dca485", "parents": [ "b4ad112b4006e5bd266f31d0b7d6db22f7347126" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Fri May 25 17:36:07 2012 -0600" }, "committer": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Mon Jun 25 08:51:01 2012 -0600" }, "message": "msm: thermal: Simplify kernel thermal safeguard mechanism\n\nUsing CPUFreq policy objects and setting the max frequency limit by\noverriding the policy-\u003emax node, leads to race/overwrite conditions with\nan user trying to use the scaling_max_frequency node.\n\nThe thermal limits are directly communicated to the \u0027msm\u0027 cpufreq driver\nand use the cpufreq_update_policy() to ensure that the frequency is\nlimited as per the thermal safeguard requirements.\n\nCRs-fixed: 370343\nChange-Id: Iab5a15e0f0d25da4b9f6a9417dbfc01bf5d6f8f6\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n" }, { "commit": "32200301c56b5f8490dc199e4f16b790c879bdf4", "tree": "a6e2ebb719f69e7f7968a7366c47f55f1724e5a9", "parents": [ "5f979254a80b7a844df3d9c1f49e16427f2477cc" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Thu May 31 18:02:24 2012 -0700" }, "committer": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Mon Jun 25 07:35:04 2012 -0700" }, "message": "msm: rotator: Add secure session flag to rotator start data\n\nAdd flag for handling secure session to rotator data passed during\nstart ioctl call.\n\nChange-Id: Iaf22b7584a15d4678cd44483c0118bf1fb4c7c9b\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" }, { "commit": "9b6e58bc7b49aca31f1fac08cf640b08a1de4fe2", "tree": "add2a730477730b32cf9747c5c420b894cb9534e", "parents": [ "48baac2d9e7d427c4bd4c086b1fe937806ebeb3d" ], "author": { "name": "Amit Blay", "email": "ablay@codeaurora.org", "time": "Mon Jun 18 13:12:49 2012 +0300" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jun 25 04:46:39 2012 -0600" }, "message": "usb: otg: Fix USB remote-wakeup with LPM\n\nSome of USB clocks have to be enabled in order for A2 to\nbe able to wake up USB.\nSince USB now enters LPM upon USB bus suspend, this fix keeps\nUSB pclk \u0026 core_clk enabled, to allow waking up from A2.\n\nA similar fix was already introduced for HSIC driver. This\nchange adds similar fix for USB.\n\nChange-Id: Icd434132bc3dc3466dc7a55bb40603a3de3b4b2f\nCRs-Fixed: 369189\nSigned-off-by: Amit Blay \u003cablay@codeaurora.org\u003e\n" }, { "commit": "0a24ae80136689cbead9eb871e2153e262607f51", "tree": "7fcc64c0daf60b36a78a90c27bda533a549d0846", "parents": [ "7dc20bf95baed863560fbcb75604eb0dfe3ff768", "5a6178b99246319bcc6753460aa4cbecf02da206" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jun 25 02:10:18 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jun 25 02:10:18 2012 -0700" }, "message": "Merge \"usb: msm_hsusb: Add include to linux/hrtimer\" into msm-3.4" }, { "commit": "d1760796f3ddc57a5808d9404d4403a43033066c", "tree": "8f50153c73de8a2350d61bda012a54b7a3c76394", "parents": [ "7dc20bf95baed863560fbcb75604eb0dfe3ff768" ], "author": { "name": "Santosh Mardi", "email": "gsantosh@codeaurora.org", "time": "Tue Jun 12 16:23:19 2012 +0530" }, "committer": { "name": "Santosh Mardi", "email": "gsantosh@codeaurora.org", "time": "Mon Jun 25 12:28:21 2012 +0530" }, "message": "ASoC: msm: Add support for afe disconnect command\n\nFor compressed playback to bypass ADM, AFE connect command\nIs used when the session is closed AFE disconnect command\nShould be issued.\n\nAdd the support for AFE disconnect command.\n\nChange-Id: I4cc4e867c1be36fbc2659520fd14a356c8405f7b\nSigned-off-by: Santosh Mardi \u003cgsantosh@codeaurora.org\u003e\n" }, { "commit": "28feb3d6001aede64d44f7aa13f364571bb25c5c", "tree": "8f6486f358d64b1eef802bd5cae6f032a79d483d", "parents": [ "7dc20bf95baed863560fbcb75604eb0dfe3ff768" ], "author": { "name": "Nishant Pandit", "email": "npandit@codeaurora.org", "time": "Thu Apr 26 23:56:22 2012 +0530" }, "committer": { "name": "Nishant Pandit", "email": "npandit@codeaurora.org", "time": "Mon Jun 25 09:39:31 2012 +0530" }, "message": "msm: camera: Add support for RDI in VFE\n\nEnable RDI registers and irq handler in VFE. RDI may\nbe used to dump sensor data directly to memory\nwithout passing through VFE.\n\nChange-Id: I1ca131c31913f62228364440bbe2cd98a6079003\nSigned-off-by: Nishant Pandit \u003cnpandit@codeaurora.org\u003e\n" }, { "commit": "89d6d92f35d4db0e8251bc8044e17f78fed5d6bf", "tree": "9df65b6217010718cec583d4d64b64fc2c4bff79", "parents": [ "6067aeebe55995266c2570b750c684c5e013ce2d", "cf7e27f92a99cdc422d67f6d328c0b910d2bbf9d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jun 24 11:14:15 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jun 24 11:14:15 2012 -0700" }, "message": "Merge \"msm: vidc: Video driver update to kernel 3.4.\" into msm-3.4" }, { "commit": "5a6178b99246319bcc6753460aa4cbecf02da206", "tree": "f6e107bc9fe50a802a800f79c8091d8c66c6a8d9", "parents": [ "c8c69d92c14c130b06ad08ce1722161215f9e9e0" ], "author": { "name": "Ido Shayevitz", "email": "idos@codeaurora.org", "time": "Sun Jun 10 16:31:13 2012 +0300" }, "committer": { "name": "Ido Shayevitz", "email": "idos@codeaurora.org", "time": "Sun Jun 24 11:29:02 2012 +0300" }, "message": "usb: msm_hsusb: Add include to linux/hrtimer\n\nThis fixes a compilation problem.\n\nChange-Id: Ie8a8ffb5f16351a6590f8743b1b2639c1cb6da73\nSigned-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n" }, { "commit": "d5b72ad32325771d662c4da368b0279375200e4b", "tree": "540589439f97a6108274e76cba9702789bf0a218", "parents": [ "7da88b117a2fb591421e93558413568ca5f61b09" ], "author": { "name": "Andy Grover", "email": "agrover@redhat.com", "time": "Tue Apr 03 15:51:20 2012 -0700" }, "committer": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Sun Jun 24 11:43:36 2012 +0530" }, "message": "target: Rename target_allocate_tasks to target_setup_cmd_from_cdb\n\nThis patch renames a horribly misnamed function that no longer allocate\ntasks to something more descriptive for it\u0027s modern use in target core.\n\n(nab: Fix up ib_srpt to use this as well ahead of a target_submit_cmd\nconversion)\n\nChange-Id: Ib7ab2b67723753777084fffe19c47e6eac3b255e\nSigned-off-by: Andy Grover \u003cagrover@redhat.com\u003e\nSigned-off-by: Nicholas Bellinger \u003cnab@linux-iscsi.org\u003e\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\n" }, { "commit": "7da88b117a2fb591421e93558413568ca5f61b09", "tree": "9a2ab9226fcd944c62cc0e93367b7cc1f0360ca8", "parents": [ "ca5ace246a3ae92ef960e5f1f161ae87584a03d8" ], "author": { "name": "Sebastian Andrzej Siewior", "email": "bigeasy@linutronix.de", "time": "Tue Jan 10 14:16:59 2012 +0100" }, "committer": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Sun Jun 24 11:36:25 2012 +0530" }, "message": "target: add unknown size flag to target_submit_cmd()\n\nThe UASP protocol does not inform the target device upfront how much\ndata it should expect so we have to learn in from the CDB. So in order\nto handle this case, add a TARGET_SCF_UNKNOWN_SIZE to target_submit_cmd()\nand perform an explictly assignment for se_cmd-\u003edata_length from the\nextracted CDB size in transport_generic_cmd_sequencer().\n\nChange-Id: Ic654c46de72b263aea8aeb5e8a76136f47dd775e\nSigned-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nSigned-off-by: Nicholas Bellinger \u003cnab@linux-iscsi.org\u003e\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\n" }, { "commit": "c00dd9ba47857a37cf656c8e214635b1e79cadc2", "tree": "867691bb91e5eed3502d12d08e8320f498e04d35", "parents": [ "43e3998862b97dc969e7a43af69fb1e349da5d7e" ], "author": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Sat Jun 23 14:34:18 2012 -0700" }, "committer": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Sat Jun 23 14:34:18 2012 -0700" }, "message": "diag: Add new SSID\n\nModem header files added new SSID. We need same changes on Linux side.\n\nChange-Id: Ia383fd1f8ab889369b2577ae2df13894a1a62f7a\nSigned-off-by: Shalabh Jain \u003cshalabhj@codeaurora.org\u003e\n" }, { "commit": "b4a278e5206d63224c6c8dc4d46f971cc1124c4b", "tree": "bef2c5955d8b4b0daa69b7f67c9d0683244252ac", "parents": [ "8131ab9b590c475683a36683962e5ac40d4be2c9" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Mon Jun 18 19:25:47 2012 -0700" }, "committer": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Sat Jun 23 13:51:52 2012 -0700" }, "message": "msm: camera: Add IRQ Router subdev implementation.\n\nAdd initial driver code for IRQ Router hardware.\nIt shall be implemented as a v4l2 subdevice of the\nmsm cam server node.\nAdd logic in msm cam server to request for irqs configured\nto the IRQ Router, which can be individual or composite.\nWhen the individual camera hardware cores interrupt,\nthe cam server receives them through the common interrupt\nhandler and dispatches them to to the respective hardware\ncore\u0027s v4l2 subdevice.\nIf the usecase demands that the interrupts from two\ndifferent hw cores be composited into a single interrupt,\n(for eg: VFE and ISPIF), then the cam server stores this\nconfiguration in its interrupt lookup table. When the\ninterrupt is triggered on the composited interrupt,\nit is dispatched to the individual hardware cores\nwhich have been composited into that interrupt.\n\nChange-Id: Iaadd60cc24de9b5ba8d09a151474658902244d7b\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "8131ab9b590c475683a36683962e5ac40d4be2c9", "tree": "26ee986f8f368b3360a85a8b4359fddc7b68441d", "parents": [ "40c18f4139199c066bf3b9acd74814912803b237", "7e4464817409aee5e3cb0aec4612f1b0352c28e4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jun 23 13:49:34 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jun 23 13:49:34 2012 -0700" }, "message": "Merge \"gpu: ion: Add support for content protection 2.0 in CP heap\" into msm-3.4" }, { "commit": "bbbf3bc27be62782415a347119a192ccff355156", "tree": "020b2ef2320ca54d35def24f737a210efcd7fbe5", "parents": [ "5fd552cb8732b55ae8e4ce8ac3d265788546a0af", "5749b095336c219bb304ca8e49b233916817f611" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jun 23 12:07:33 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jun 23 12:07:33 2012 -0700" }, "message": "Merge \"ASoc: soc-pcm: Open/close share channel once if it is used by two streams\" into msm-3.4" }, { "commit": "fb6b7b71817d08c9f470c3c9ff3b640ade5d6eea", "tree": "899935855ac2e7db5a0e3f2be25ab37334e2406b", "parents": [ "8937187d44c6faa5e2339ead009151d0f9d408df", "2df27e66353d448e145f7e9fcc4cf57016cf4b57" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jun 23 09:06:00 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jun 23 09:06:00 2012 -0700" }, "message": "Merge \"msm: camera: Use image mode to get buffer\" into msm-3.4" }, { "commit": "c67677a527c401bff5fd67a98fabbfaf8e912a4e", "tree": "6ba333d6551e448f3f69f65c43b6ff730513e51c", "parents": [ "1d98ed58e6548ec755de7233c8e9cc4be80343a2", "eff4bd5e4dc92ed0245d2083f75810d15fb436d8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jun 23 04:18:26 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jun 23 04:18:26 2012 -0700" }, "message": "Merge \"mfd: pm8038-core: Add support for PMIC thermal alarm\" into msm-3.4" }, { "commit": "414c4f927a0b360394e1f2485a6fc28ac059e14f", "tree": "daf71ff46aaa5d1d6ac5854323f0ca200659b3e6", "parents": [ "410a22f4a41e35bf443732776c2772fa84f98e49", "d0c83de621851b87789fdcd46f72628d11dccbe4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jun 23 00:39:40 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jun 23 00:39:40 2012 -0700" }, "message": "Merge \"gpu: ion: Add scm calls for content protection 2.0\" into msm-3.4" }, { "commit": "993fb108d3403f979d71d70fe02ac4b4afe55610", "tree": "b16b098d36ecc7f48d270d38c52c40981d795799", "parents": [ "2e9ec48a2ceeb59e656a2b2a97ed79a97407b814", "dac9e600a56f3ddd43ac2499e155bf0782199207" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 22 23:11:23 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 22 23:11:23 2012 -0700" }, "message": "Merge \"input: change mpu3050 driver to request regulator, add poll support\" into msm-3.4" }, { "commit": "82fd6a45d94c10f85f8b1e89417f262253714498", "tree": "be6cdc630da9cddf4be03f4792cbab7bd8c97694", "parents": [ "a060f668ce1204a3f9fc070c45e481f2032ae971", "152c3c7ba9bc0d47857534f3c7c16f6817297ae1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 22 16:11:20 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 22 16:11:20 2012 -0700" }, "message": "Merge \"msm:vidc: provide support to raise afab and ebi1 clks to turbo mode.\" into msm-3.4" }, { "commit": "3ced7bf59c0c1b7a1ad778a922eeb0e97d604efd", "tree": "1b53f9f4665d2bd5872a896356109e91bdb3047c", "parents": [ "3642ec172eea4c4f1f7873a1eac60b05b3914ae3", "93eb1769b8cc503bc431d266b4cd5aa5ea73a49e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 22 16:11:06 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 22 16:11:06 2012 -0700" }, "message": "Merge \"radio-tavarua: Add IOCTL commands to configure the SPUR Table\" into msm-3.4" }, { "commit": "cf7e27f92a99cdc422d67f6d328c0b910d2bbf9d", "tree": "c861b3b34a50bb0f9db3e00a0ac294432a8cc861", "parents": [ "3642ec172eea4c4f1f7873a1eac60b05b3914ae3" ], "author": { "name": "Vinay Kalia", "email": "vkalia@codeaurora.org", "time": "Thu Jun 14 19:05:15 2012 -0700" }, "committer": { "name": "Ashray Kulkarni", "email": "ashrayk@codeaurora.org", "time": "Fri Jun 22 15:25:13 2012 -0700" }, "message": "msm: vidc: Video driver update to kernel 3.4.\n\nDuring the migration from kernel 3.0 to 3.4, V4L2 framework changed.\nThis requires changes from video driver. This change makes video\ndriver code compatible with kernel 3.4.\n\nChange-Id: I12fb28e4b7c261c9755fbb62bb6bb8ea299d5272\nSigned-off-by: Vinay Kalia \u003cvkalia@codeaurora.org\u003e\n" }, { "commit": "2df27e66353d448e145f7e9fcc4cf57016cf4b57", "tree": "c10cd476e89cae9049028318c43814a44e2557d6", "parents": [ "f2bd41381a2982d0c787f57ab9a9240e023fb5ce" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Fri Jun 15 00:06:54 2012 -0700" }, "committer": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Fri Jun 22 11:15:07 2012 -0700" }, "message": "msm: camera: Use image mode to get buffer\n\nUse image mode instead of vfe operation mode to\nget and free buffer\n\nChange-Id: I33e912b0fa4e16d3a89161f98ab9a659b9c197f6\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "00046e05d64b58c32cfe6e0ec69031426b1182c5", "tree": "587bd80ce7fd114f966ada257033db479a3fd691", "parents": [ "d3a799c549c2ced440f63b9ace9f9bceca62ddad" ], "author": { "name": "Devin Kim", "email": "dojip.kim@lge.com", "time": "Wed Jun 20 07:50:21 2012 -0700" }, "committer": { "name": "Iliyan Malchev", "email": "malchev@google.com", "time": "Fri Jun 22 10:45:37 2012 -0700" }, "message": "audio: fsa8008: fix typo in header file\n\nChange-Id: Iec7d63e82cf58e575dd7b95da9613032de9feef5\n" } ], "next": "b6a31f35fe66d48ee147e251355ca47f5028b981" }