)]}'
{
  "log": [
    {
      "commit": "4356f21d09283dc6d39a6f7287a65ddab61e2808",
      "tree": "34822a1662ea83291455834556a4fb5bf98ecd72",
      "parents": [
        "b9e84ac1536d35aee03b2601f19694949f0bd506"
      ],
      "author": {
        "name": "Minchan Kim",
        "email": "minchan.kim@gmail.com",
        "time": "Mon Oct 31 17:06:47 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Mon Oct 31 17:30:44 2011 -0700"
      },
      "message": "mm: change isolate mode from #define to bitwise type\n\nChange ISOLATE_XXX macro with bitwise isolate_mode_t type.  Normally,\nmacro isn\u0027t recommended as it\u0027s type-unsafe and making debugging harder as\nsymbol cannot be passed throught to the debugger.\n\nQuote from Johannes\n\" Hmm, it would probably be cleaner to fully convert the isolation mode\ninto independent flags.  INACTIVE, ACTIVE, BOTH is currently a\ntri-state among flags, which is a bit ugly.\"\n\nThis patch moves isolate mode from swap.h to mmzone.h by memcontrol.h\n\nSigned-off-by: Minchan Kim \u003cminchan.kim@gmail.com\u003e\nCc: Johannes Weiner \u003channes@cmpxchg.org\u003e\nCc: KAMEZAWA Hiroyuki \u003ckamezawa.hiroyu@jp.fujitsu.com\u003e\nCc: KOSAKI Motohiro \u003ckosaki.motohiro@jp.fujitsu.com\u003e\nCc: Mel Gorman \u003cmgorman@suse.de\u003e\nCc: Rik van Riel \u003criel@redhat.com\u003e\nCc: Michal Hocko \u003cmhocko@suse.cz\u003e\nCc: Andrea Arcangeli \u003caarcange@redhat.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "1a4ceab195e66bce9c1638fdded6d92988100ba4",
      "tree": "3ec17bd66fb3ac1429131e373cc8d99550d5451a",
      "parents": [
        "83f89ca755c9f783b8229d968c4e9d2c660ca427",
        "6a32e4f9dd9219261f8856f817e6655114cfec2f"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Mon Oct 31 15:22:44 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Mon Oct 31 15:22:44 2011 -0700"
      },
      "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)\n  vlan: allow nested vlan_do_receive()\n  ipv6: fix route lookup in addrconf_prefix_rcv()\n  bonding: eliminate bond_close race conditions\n  qlcnic: fix beacon and LED test.\n  qlcnic: Updated License file\n  qlcnic: updated reset sequence\n  qlcnic: reset loopback mode if promiscous mode setting fails.\n  qlcnic: skip IDC ack check in fw reset path.\n  i825xx: Fix incorrect dependency for BVME6000_NET\n  ipv6: fix route error binding peer in func icmp6_dst_alloc\n  ipv6: fix error propagation in ip6_ufo_append_data()\n  stmmac: update normal descriptor structure (v2)\n  stmmac: fix NULL pointer dereference in capabilities fixup (v2)\n  stmmac: fix a bug while checking the HW cap reg (v2)\n  be2net: Changing MAC Address of a VF was broken.\n  be2net: Refactored be_cmds.c file.\n  bnx2x: update driver version to 1.70.30-0\n  bnx2x: use FW 7.0.29.0\n  bnx2x: Enable changing speed when port type is PORT_DA\n  bnx2x: Fix 54618se LED behavior\n  ...\n"
    },
    {
      "commit": "839d8810747bbf39e0a5a7f223b67bffa7945f8d",
      "tree": "c16583342b871107f6805c21da4b1a96cfaa7aac",
      "parents": [
        "0cfdc724390fb9370f27bb9a133eadf69114dd21",
        "06a67848c6681a73e621e47c056490d51a07289f"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Sun Oct 30 15:54:59 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Sun Oct 30 15:54:59 2011 -0700"
      },
      "message": "Merge branch \u0027i2c-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging\n\n* \u0027i2c-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:\n  i2c: Functions for byte-swapped smbus_write/read_word_data\n  i2c-algo-pca: Return standard fault codes\n  i2c-algo-bit: Return standard fault codes\n  i2c-algo-bit: Be verbose on bus testing failure\n  i2c-algo-bit: Let user test buses without failing\n  i2c/scx200_acb: Fix section mismatch warning in scx200_pci_drv\n  i2c: I2C_ELEKTOR should depend on HAS_IOPORT\n"
    },
    {
      "commit": "1bc87b00556e8f7ba30a1010471951c5b8f71114",
      "tree": "e73c2d187e2dff0df97ed82e32b45e362b923117",
      "parents": [
        "acff987d94cbdb4049f3706bed1f1792f8ef6837",
        "f1c1da2bde712812a3e0f9a7a7ebe7a916a4b5f4"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Sun Oct 30 15:36:45 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Sun Oct 30 15:36:45 2011 -0700"
      },
      "message": "Merge branch \u0027kvm-updates/3.2\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm\n\n* \u0027kvm-updates/3.2\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (75 commits)\n  KVM: SVM: Keep intercepting task switching with NPT enabled\n  KVM: s390: implement sigp external call\n  KVM: s390: fix register setting\n  KVM: s390: fix return value of kvm_arch_init_vm\n  KVM: s390: check cpu_id prior to using it\n  KVM: emulate lapic tsc deadline timer for guest\n  x86: TSC deadline definitions\n  KVM: Fix simultaneous NMIs\n  KVM: x86 emulator: convert push %sreg/pop %sreg to direct decode\n  KVM: x86 emulator: switch lds/les/lss/lfs/lgs to direct decode\n  KVM: x86 emulator: streamline decode of segment registers\n  KVM: x86 emulator: simplify OpMem64 decode\n  KVM: x86 emulator: switch src decode to decode_operand()\n  KVM: x86 emulator: qualify OpReg inhibit_byte_regs hack\n  KVM: x86 emulator: switch OpImmUByte decode to decode_imm()\n  KVM: x86 emulator: free up some flag bits near src, dst\n  KVM: x86 emulator: switch src2 to generic decode_operand()\n  KVM: x86 emulator: expand decode flags to 64 bits\n  KVM: x86 emulator: split dst decode to a generic decode_operand()\n  KVM: x86 emulator: move memop, memopp into emulation context\n  ...\n"
    },
    {
      "commit": "acff987d94cbdb4049f3706bed1f1792f8ef6837",
      "tree": "36bded977aab5d80cf9aeb5467f83dd554a25d01",
      "parents": [
        "ce949717b559709423c1ef716a9db16d1dcadaed",
        "b57287ba497b63a0d87a058631bbddfed9392e9f"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Sun Oct 30 15:30:01 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Sun Oct 30 15:30:01 2011 -0700"
      },
      "message": "Merge branch \u0027fbdev-next\u0027 of git://github.com/schandinat/linux-2.6\n\n* \u0027fbdev-next\u0027 of git://github.com/schandinat/linux-2.6: (270 commits)\n  video: platinumfb: Add __devexit_p at necessary place\n  drivers/video: fsl-diu-fb: merge diu_pool into fsl_diu_data\n  drivers/video: fsl-diu-fb: merge diu_hw into fsl_diu_data\n  drivers/video: fsl-diu-fb: only DIU modes 0 and 1 are supported\n  drivers/video: fsl-diu-fb: remove unused panel operating mode support\n  drivers/video: fsl-diu-fb: use an enum for the AOI index\n  drivers/video: fsl-diu-fb: add several new video modes\n  drivers/video: fsl-diu-fb: remove broken screen blanking support\n  drivers/video: fsl-diu-fb: move some definitions out of the header file\n  drivers/video: fsl-diu-fb: fix some ioctls\n  video: da8xx-fb: Increased resolution configuration of revised LCDC IP\n  OMAPDSS: picodlp: add missing #include \u003clinux/module.h\u003e\n  fb: fix au1100fb bitrot.\n  mx3fb: fix NULL pointer dereference in screen blanking.\n  video: irq: Remove IRQF_DISABLED\n  smscufx: change edid data to u8 instead of char\n  OMAPDSS: DISPC: zorder support for DSS overlays\n  OMAPDSS: DISPC: VIDEO3 pipeline support\n  OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility setting\n  video/omap: fix build dependencies\n  ...\n\nFix up conflicts in:\n - drivers/staging/xgifb/XGI_main_26.c\n\tChanges to XGIfb_pan_var()\n - drivers/video/omap/{lcd_apollon.c,lcd_ldp.c,lcd_overo.c}\n\tRemoved (or in the case of apollon.c, merged into the generic\n\tDSS panel in drivers/video/omap2/displays/panel-generic-dpi.c)\n"
    },
    {
      "commit": "06a67848c6681a73e621e47c056490d51a07289f",
      "tree": "df6e3df869b7b1a1f40f09b9b3a6f8b8a2ad12d6",
      "parents": [
        "4403988afc0a92b8faf59b46f51d25fafaf0e63d"
      ],
      "author": {
        "name": "Jonathan Cameron",
        "email": "jic23@cam.ac.uk",
        "time": "Sun Oct 30 13:47:25 2011 +0100"
      },
      "committer": {
        "name": "Jean Delvare",
        "email": "khali@endymion.delvare",
        "time": "Sun Oct 30 13:47:25 2011 +0100"
      },
      "message": "i2c: Functions for byte-swapped smbus_write/read_word_data\n\nReimplemented at least 17 times discounting error mangling cases\nwhere it could be used.\n\nSigned-off-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n"
    },
    {
      "commit": "445b62dfd934394807c12aee06d3f20cf70c93b4",
      "tree": "eb69d8607efcb3aaecae8996f747d20f6c0f9d1a",
      "parents": [
        "68233c583ab4549b739f12135bdab108336d5204"
      ],
      "author": {
        "name": "Sritej Velaga",
        "email": "sritej.velaga@qlogic.com",
        "time": "Fri Oct 28 12:57:14 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Sun Oct 30 03:09:40 2011 -0400"
      },
      "message": "qlcnic: Updated License file\n\nUpdated qlcnic\u0027s license file.\n\nSigned-off-by: Sritej Velaga \u003csritej.velaga@qlogic.com\u003e\nSigned-off-by: Anirban Chakraborty \u003canirban.chakraborty@qlogic.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "ec7ae517537ae5c7b0b2cd7f562dfa3e7a05b954",
      "tree": "e6b0c64a51a7c0aa0efd09d4f7a80872e3b1657a",
      "parents": [
        "97d2eb13a019ec09cc1a7ea2d3705c0b117b3c0d",
        "590134fa78fbdbe5fea78c7ae0b2c3364bc9572f"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Oct 28 16:44:18 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Oct 28 16:44:18 2011 -0700"
      },
      "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits)\n  [SCSI] qla4xxx: export address/port of connection (fix udev disk names)\n  [SCSI] ipr: Fix BUG on adapter dump timeout\n  [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer\n  [SCSI] hpsa: change confusing message to be more clear\n  [SCSI] iscsi class: fix vlan configuration\n  [SCSI] qla4xxx: fix data alignment and use nl helpers\n  [SCSI] iscsi class: fix link local mispelling\n  [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA\n  [SCSI] aacraid: use lower snprintf() limit\n  [SCSI] lpfc 8.3.27: Change driver version to 8.3.27\n  [SCSI] lpfc 8.3.27: T10 additions for SLI4\n  [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery\n  [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name\n  [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout\n  [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes\n  [SCSI] megaraid_sas: Changelog and version update\n  [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic\n  [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support\n  [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers\n  [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts\n  ...\n"
    },
    {
      "commit": "68d99b2c8efcb6ed3807a55569300c53b5f88be5",
      "tree": "f189c8f2132d3668a2f0e503f5c3f8695b26a1c8",
      "parents": [
        "0e59e7e7feb5a12938fbf9135147eeda3238c6c4",
        "8128c9f21509f9a8b6da94ac432d845dda458406"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Oct 28 14:25:01 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Oct 28 14:25:01 2011 -0700"
      },
      "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits)\n  ALSA: hda - Fix ADC input-amp handling for Cx20549 codec\n  ALSA: hda - Keep EAPD turned on for old Conexant chips\n  ALSA: hda/realtek - Fix missing volume controls with ALC260\n  ASoC: wm8940: Properly set codec-\u003edapm.bias_level\n  ALSA: hda - Fix pin-config for ASUS W90V\n  ALSA: hda - Fix surround/CLFE headphone and speaker pins order\n  ALSA: hda - Fix typo\n  ALSA: Update the sound git tree URL\n  ALSA: HDA: Add new revision for ALC662\n  ASoC: max98095: Convert codec-\u003ehw_write to snd_soc_write\n  ASoC: keep pointer to resource so it can be freed\n  ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls\n  ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2\n  ASoC: da7210: Add support for line out and DAC\n  ASoC: da7210: Add support for DAPM\n  ALSA: hda/realtek - Fix DAC assignments of multiple speakers\n  ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value\n  ASoC: Set sgtl5000-\u003eldo in ldo_regulator_register\n  ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture\n  ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture\n  ...\n"
    },
    {
      "commit": "46b51ea2099fa2082342e52b8284aa828429b80b",
      "tree": "0a0d7bfe1aff036c86a2e7beacbd91398008bfb6",
      "parents": [
        "1fdb24e969110fafea36d3b393bea438f702c87f",
        "a6029e1f75bb484c1f5bc68b6a8572e4024795bc"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Oct 28 14:16:11 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Oct 28 14:16:11 2011 -0700"
      },
      "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (83 commits)\n  mmc: fix compile error when CONFIG_BLOCK is not enabled\n  mmc: core: Cleanup eMMC4.5 conditionals\n  mmc: omap_hsmmc: if multiblock reads are broken, disable them\n  mmc: core: add workaround for controllers with broken multiblock reads\n  mmc: core: Prevent too long response times for suspend\n  mmc: recognise SDIO cards with SDIO_CCCR_REV 3.00\n  mmc: sd: Handle SD3.0 cards not supporting UHS-I bus speed mode\n  mmc: core: support HPI send command\n  mmc: core: Add cache control for eMMC4.5 device\n  mmc: core: Modify the timeout value for writing power class\n  mmc: core: new discard feature support at eMMC v4.5\n  mmc: core: mmc sanitize feature support for v4.5\n  mmc: dw_mmc: modify DATA register offset\n  mmc: sdhci-pci: add flag for devices that can support runtime PM\n  mmc: omap_hsmmc: ensure pbias configuration is always done\n  mmc: core: Add Power Off Notify Feature eMMC 4.5\n  mmc: sdhci-s3c: fix potential NULL dereference\n  mmc: replace printk with appropriate display macro\n  mmc: core: Add default timeout value for CMD6\n  mmc: sdhci-pci: add runtime pm support\n  ...\n"
    },
    {
      "commit": "ca836a25435ef1b9914840ed0a310c9b6ac261d1",
      "tree": "13c94f7e2fff14eb526608c2884b5faa3dab1f90",
      "parents": [
        "d630ba565f3d806d64df4415d4a8457b4ab23db6",
        "664ef2123f4abc05857bf9b2dcccb800fa6fce26"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Oct 28 05:46:02 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Oct 28 05:46:02 2011 -0700"
      },
      "message": "Merge branch \u0027x86-vdso-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip\n\n* \u0027x86-vdso-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:\n  x86-64, doc: Remove int 0xcc from entry_64.S documentation\n  x86, vsyscall: Add missing \u003casm/fixmap.h\u003e to arch/x86/mm/fault.c\n\nFix up trivial conflicts in arch/x86/mm/fault.c (asm/fixmap.h vs\nasm/vsyscall.h: both work, which to use? Whatever..)\n"
    },
    {
      "commit": "8e6d539e0fd0c2124a20a207da70f2af7a9ae52c",
      "tree": "73016c1bdb5005125cdb5d60d48f73ab4300be64",
      "parents": [
        "8237eb946a1a23c600fb289cf8dd3b399b10604e",
        "49d859d78c5aeb998b6936fcb5f288f78d713489"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Oct 28 05:29:07 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Oct 28 05:29:07 2011 -0700"
      },
      "message": "Merge branch \u0027x86-rdrand-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip\n\n* \u0027x86-rdrand-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:\n  x86, random: Verify RDRAND functionality and allow it to be disabled\n  x86, random: Architectural inlines to get random integers with RDRAND\n  random: Add support for architectural random hooks\n\nFix up trivial conflicts in drivers/char/random.c: the architectural\nrandom hooks touched \"get_random_int()\" that was simplified to use MD5\nand not do the keyptr thing any more (see commit 6e5714eaf77d: \"net:\nCompute protocol sequence numbers and fragment IDs using MD5\").\n"
    },
    {
      "commit": "e34eb39c1c791fe79da6aae0d9057f0c74c2f0ed",
      "tree": "cfc27d987b2c888f189f35326702220b694596cc",
      "parents": [
        "396e6e49c58bb23d1814d3c240c736c9f01523c5",
        "910b2c5122ab787179a790ca1dec616fc80f0173"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Oct 28 05:03:12 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Oct 28 05:03:12 2011 -0700"
      },
      "message": "Merge branch \u0027x86-cpu-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip\n\n* \u0027x86-cpu-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:\n  x86, amd: Include linux/elf.h since we use stuff from asm/elf.h\n  x86: cache_info: Update calculation of AMD L3 cache indices\n  x86: cache_info: Kill the atomic allocation in amd_init_l3_cache()\n  x86: cache_info: Kill the moronic shadow struct\n  x86: cache_info: Remove bogus free of amd_l3_cache data\n  x86, amd: Include elf.h explicitly, prepare the code for the module.h split\n  x86-32, amd: Move va_align definition to unbreak 32-bit build\n  x86, amd: Move BSP code to cpu_dev helper\n  x86: Add a BSP cpu_dev helper\n  x86, amd: Avoid cache aliasing penalties on AMD family 15h\n"
    },
    {
      "commit": "396e6e49c58bb23d1814d3c240c736c9f01523c5",
      "tree": "a6ec8dac896c3ea3ac7b1bb0dce8728766afcf91",
      "parents": [
        "18974369cfe23acf16d0fb79e0d1fba7a9a95ec0",
        "6ad390a25a9d1d8606b9b826878f0a30639dc2b3"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Oct 27 08:44:20 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Oct 27 08:44:20 2011 +0200"
      },
      "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (68 commits)\n  Input: adp5589-keys - add support for the ADP5585 derivatives\n  Input: imx_keypad - add pm suspend and resume support\n  Input: force feedback - potential integer wrap in input_ff_create()\n  Input: tsc2007 - make sure that X plate resistance is specified\n  Input: serio_raw - fix memory leak when closing char device\n  Input: serio_raw - kick clients when disconnecting port\n  Input: serio_raw - explicitly mark disconnected ports as dead\n  Input: serio_raw - fix coding style issues\n  Input: serio_raw - use dev_*() for messages\n  Input: serio_raw - use bool for boolean data\n  Input: serio_raw - perform proper locking when adding clients to list\n  Input: serio_raw - rename serio_raw_list to serio_raw_client\n  Input: serio_raw - use kref instead of rolling out its own refcounting\n  Input: psmouse - switch to using dev_*() for messages\n  Input: wacom - correct max Y value on medium bamboos\n  Input: wacom - add ABS_DISTANCE to Bamboo Pen reports\n  Input: wacom - remove unneeded touch pressure initialization\n  Input: lm8323 - wrap suspend and resume in CONFIG_PM_SLEEP\n  Input: ad7879-i2c - wrap suspend and resume in CONFIG_PM_SLEEP\n  Input: synaptics_i2c - wrap suspend and resume in CONFIG_PM_SLEEP\n  ...\n"
    },
    {
      "commit": "5fffb9513cb7fdd39e03c4cab1cda9c2f2694576",
      "tree": "f28f1c232dd5774c9157ba257df37e66d4097870",
      "parents": [
        "b96d71571f7745216ef63f13770b5a10b94ddd34",
        "ae97159aed6eff68f4ac86472b018985f071fed5"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Oct 27 08:35:41 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Oct 27 08:35:41 2011 +0200"
      },
      "message": "Merge branch \u0027devicetree/next\u0027 of git://git.secretlab.ca/git/linux-2.6\n\n* \u0027devicetree/next\u0027 of git://git.secretlab.ca/git/linux-2.6:\n  of_mdio: Don\u0027t phy_scan_fixups() twice\n  Devicetree: Expand on ARM Primecell binding documentation\n  dt: Add empty of_match_node() macro\n  dt: add empty dt helpers for non-dt build\n  devicetree: fix build error on drivers/tty/serial/altera_jtaguart.c\n  devicetree: Add ARM pl022 spi controller binding doc\n  devicetree: Add ARM pl061 gpio controller binding doc\n  of/irq: of_irq_find_parent: check for parent equal to child\n  MAINTAINERS: update devicetree maintainers\n  dt: add helper to read 64-bit integers\n  tty: use of_match_ptr() for of_match_table entry\n  OF: Add of_match_ptr() macro\n  dt: add empty for_each_child_of_node, of_find_property\n  devicetree: Document Qualcomm and Atmel prefixes\n  serial/imx: add of_alias_get_id() reference back\n  dt: add of_alias_scan and of_alias_get_id\n  devicetree: Add a registry of vendor prefixes\n"
    },
    {
      "commit": "9430148d800dd929ad73da4c6afb67f793f8af43",
      "tree": "437d0aec41428cbb310a202100ba581c63fbe89e",
      "parents": [
        "d22665702226e9c40bc331098559e3d55e7cd43d",
        "88e24c3a4b30a6bd361f2b5ce602667a8161b2e8"
      ],
      "author": {
        "name": "Takashi Iwai",
        "email": "tiwai@suse.de",
        "time": "Wed Oct 26 23:51:48 2011 +0200"
      },
      "committer": {
        "name": "Takashi Iwai",
        "email": "tiwai@suse.de",
        "time": "Wed Oct 26 23:51:48 2011 +0200"
      },
      "message": "Merge branch \u0027topic/remove-irqf_disable\u0027 into for-linus\n"
    },
    {
      "commit": "d22665702226e9c40bc331098559e3d55e7cd43d",
      "tree": "6e92734c9835dc9e064b20182624939f3486d28d",
      "parents": [
        "5cdf745ebae0f5bcf9b798d8fd5cb57add592cc1",
        "dde7ad8dee274763c8958769779aea8c993c950e"
      ],
      "author": {
        "name": "Takashi Iwai",
        "email": "tiwai@suse.de",
        "time": "Wed Oct 26 23:51:43 2011 +0200"
      },
      "committer": {
        "name": "Takashi Iwai",
        "email": "tiwai@suse.de",
        "time": "Wed Oct 26 23:51:43 2011 +0200"
      },
      "message": "Merge branch \u0027topic/misc\u0027 into for-linus\n"
    },
    {
      "commit": "199e3f4b419d045e64d5205a6354c5db04d98553",
      "tree": "f6fb66ffa0cae55b6ded39eb3fd356dc991b7c80",
      "parents": [
        "34f5050800d600551cca9bcfb463cc6699d82d04"
      ],
      "author": {
        "name": "Per Forlin",
        "email": "per.forlin@linaro.org",
        "time": "Tue Sep 13 23:03:30 2011 +0200"
      },
      "committer": {
        "name": "Chris Ball",
        "email": "cjb@laptop.org",
        "time": "Wed Oct 26 16:32:13 2011 -0400"
      },
      "message": "fault-injection: update documentation with the mmc module param\n\nSigned-off-by: Per Forlin \u003cper.forlin@linaro.org\u003e\nReviewed-by: Akinobu Mita \u003cakinobu.mita@gmail.com\u003e\nSigned-off-by: Chris Ball \u003ccjb@laptop.org\u003e\n"
    },
    {
      "commit": "138c4ae9cfda8fdcf9e137457853b09ef8cf8f77",
      "tree": "704c363de6d5868b08e9ae31a436ff04d423f625",
      "parents": [
        "3b3dd79d6a8b3debd0291465fc8cd9caf765d545",
        "e182a345d40deba7c3165a2857812bf403818319"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Oct 26 21:46:18 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Oct 26 21:46:18 2011 +0200"
      },
      "message": "Merge branch \u0027slab/for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux\n\n* \u0027slab/for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:\n  tools, slub: Fix off-by-one buffer corruption after readlink() call\n  slub: Discard slab page when node partial \u003e minimum partial number\n  slub: correct comments error for per cpu partial\n  mm: restrict access to slab files under procfs and sysfs\n  slub: Code optimization in get_partial_node()\n  slub: doc: update the slabinfo.c file path\n  slub: explicitly document position of inserting slab to partial list\n  slub: update slabinfo tools to report per cpu partial list statistics\n  slub: per cpu cache for partial pages\n  slub: return object pointer from get_partial() / new_slab().\n  slub: pass kmem_cache_cpu pointer to get_partial()\n  slub: Prepare inuse field in new_slab()\n  slub: Remove useless statements in __slab_alloc\n  slub: free slabs without holding locks\n  slub: use print_hex_dump\n  slab: use print_hex_dump\n"
    },
    {
      "commit": "55cd65e48b62c6f08edbb93d5cadf96e876ebcc2",
      "tree": "89a2841e84793f86a8b8387fa938c772a0490b2d",
      "parents": [
        "1a5c8e1f4f09e67118f81885a22ceb7bbd2df4ee"
      ],
      "author": {
        "name": "Stephen Warren",
        "email": "swarren@nvidia.com",
        "time": "Tue Aug 30 13:17:16 2011 -0600"
      },
      "committer": {
        "name": "Chris Ball",
        "email": "cjb@laptop.org",
        "time": "Wed Oct 26 15:43:42 2011 -0400"
      },
      "message": "mmc: sdhci-tegra: Add 8-bit support to device tree binding.\n\nThe previous patch which implemented a DT binding for sdhci-tegra did not\nallow all platform data fields to be initialized from DT. The following\nwere missing:\n\nis_8bit: Implemented by this patch.\n\npm_flags: Not implemented yet. There are no mainline users of this field.\n  I\u0027m not quite sure what it\u0027s for, and hence how to represent this\n  in DT; the value ends up being assigned to host-\u003emmc-\u003epm_caps.\n\nWhile we\u0027re at it, fix the binding documentation to refer to \"SD/MMC\"\ninstead of \"eSDHC\", since that\u0027s the correct name; \"eSDHC\" was cut/paste\nfrom the Freescale binding docs.\n\nSigned-off-by: Stephen Warren \u003cswarren@nvidia.com\u003e\nSigned-off-by: Chris Ball \u003ccjb@laptop.org\u003e\n"
    },
    {
      "commit": "275173b225ae663e54d8dc5c93d79265aad19f89",
      "tree": "ce6cd20e8d888c74d0eaa3975acee705f239462a",
      "parents": [
        "08da834a24312157f512224691ad1fddd11c1073"
      ],
      "author": {
        "name": "Grant Likely",
        "email": "grant.likely@secretlab.ca",
        "time": "Tue Aug 23 12:15:33 2011 -0600"
      },
      "committer": {
        "name": "Chris Ball",
        "email": "cjb@laptop.org",
        "time": "Wed Oct 26 15:43:35 2011 -0400"
      },
      "message": "mmc: sdhci-tegra: Add Device Tree probing support\n\nAdd hooks to read gpio configuration out of the device tree node.\n\n[grant.likely: Rewrite of original patch from John Bonesio]\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n[swarren: Fixed tegra_sdhci_get_ro() to retrieve pdata correctly]\n[swarren: Reworked to avoid #ifdef CONFIG_OF]\n[swarren: Reworked binding based on fsl-imx-esdhc.txt]\n[swarren: Documented binding]\nSigned-off-by: Stephen Warren \u003cswarren@nvidia.com\u003e\nSigned-off-by: Chris Ball \u003ccjb@laptop.org\u003e\n"
    },
    {
      "commit": "1e4cb22bb5094def8eb5c3893f9dda2d517d29bb",
      "tree": "95d567fd1176126e14971c0135e079b552307a1d",
      "parents": [
        "1b676f70c108cda90cf9d114d16c677584400efc"
      ],
      "author": {
        "name": "Per Forlin",
        "email": "per.forlin@linaro.org",
        "time": "Fri Aug 19 14:52:38 2011 +0200"
      },
      "committer": {
        "name": "Chris Ball",
        "email": "cjb@laptop.org",
        "time": "Wed Oct 26 15:43:34 2011 -0400"
      },
      "message": "fault-inject: add documentation on MMC IO fault injection\n\nAdd description on how to enable random fault injection\nfor MMC IO.\n\nSigned-off-by: Per Forlin \u003cper.forlin@linaro.org\u003e\nAcked-by: Akinobu Mita \u003cakinobu.mita@gmail.com\u003e\nReviewed-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Chris Ball \u003ccjb@laptop.org\u003e\n"
    },
    {
      "commit": "e182a345d40deba7c3165a2857812bf403818319",
      "tree": "01cace799491cbb6bea19c10de971fd3a84d9868",
      "parents": [
        "3cfef9524677a4ecb392d6fbffe6ebce6302f1d4",
        "fe353178653b15add8626f5474842601be160281",
        "dcc3be6a548a1e51adaab3be6d9dfbb68bc0e3a0"
      ],
      "author": {
        "name": "Pekka Enberg",
        "email": "penberg@kernel.org",
        "time": "Wed Oct 26 18:09:12 2011 +0300"
      },
      "committer": {
        "name": "Pekka Enberg",
        "email": "penberg@kernel.org",
        "time": "Wed Oct 26 18:09:12 2011 +0300"
      },
      "message": "Merge branches \u0027slab/next\u0027 and \u0027slub/partial\u0027 into slab/for-linus\n"
    },
    {
      "commit": "8a4a8918ed6e4a361f4df19f199bbc2d0a89a46c",
      "tree": "d76974986aaaa8549baf2d6a106fa6cb60d64b88",
      "parents": [
        "8686a0e200419322654a75155e2e6f80346a1297",
        "540f41edc15473ca3b2876de72646546ae101374"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Oct 26 17:08:43 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Oct 26 17:08:43 2011 +0200"
      },
      "message": "Merge branch \u0027sched-core-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip\n\n* \u0027sched-core-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)\n  llist: Add back llist_add_batch() and llist_del_first() prototypes\n  sched: Don\u0027t use tasklist_lock for debug prints\n  sched: Warn on rt throttling\n  sched: Unify the -\u003ecpus_allowed mask copy\n  sched: Wrap scheduler p-\u003ecpus_allowed access\n  sched: Request for idle balance during nohz idle load balance\n  sched: Use resched IPI to kick off the nohz idle balance\n  sched: Fix idle_cpu()\n  llist: Remove cpu_relax() usage in cmpxchg loops\n  sched: Convert to struct llist\n  llist: Add llist_next()\n  irq_work: Use llist in the struct irq_work logic\n  llist: Return whether list is empty before adding in llist_add()\n  llist: Move cpu_relax() to after the cmpxchg()\n  llist: Remove the platform-dependent NMI checks\n  llist: Make some llist functions inline\n  sched, tracing: Show PREEMPT_ACTIVE state in trace_sched_switch\n  sched: Remove redundant test in check_preempt_tick()\n  sched: Add documentation for bandwidth control\n  sched: Return unused runtime on group dequeue\n  ...\n"
    },
    {
      "commit": "19b4a8d520a6e0176dd52aaa429261ad4fcaa545",
      "tree": "6dcf5a780718fc50b9cd79cc803daa7c7e080a02",
      "parents": [
        "3cfef9524677a4ecb392d6fbffe6ebce6302f1d4",
        "048b718029033af117870d3da47da12995be14a3"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Oct 26 16:26:53 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Oct 26 16:26:53 2011 +0200"
      },
      "message": "Merge branch \u0027core-rcu-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip\n\n* \u0027core-rcu-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)\n  rcu: Move propagation of -\u003ecompleted from rcu_start_gp() to rcu_report_qs_rsp()\n  rcu: Remove rcu_needs_cpu_flush() to avoid false quiescent states\n  rcu: Wire up RCU_BOOST_PRIO for rcutree\n  rcu: Make rcu_torture_boost() exit loops at end of test\n  rcu: Make rcu_torture_fqs() exit loops at end of test\n  rcu: Permit rt_mutex_unlock() with irqs disabled\n  rcu: Avoid having just-onlined CPU resched itself when RCU is idle\n  rcu: Suppress NMI backtraces when stall ends before dump\n  rcu: Prohibit grace periods during early boot\n  rcu: Simplify unboosting checks\n  rcu: Prevent early boot set_need_resched() from __rcu_pending()\n  rcu: Dump local stack if cannot dump all CPUs\u0027 stacks\n  rcu: Move __rcu_read_unlock()\u0027s barrier() within if-statement\n  rcu: Improve rcu_assign_pointer() and RCU_INIT_POINTER() documentation\n  rcu: Make rcu_assign_pointer() unconditionally insert a memory barrier\n  rcu: Make rcu_implicit_dynticks_qs() locals be correct size\n  rcu: Eliminate in_irq() checks in rcu_enter_nohz()\n  nohz: Remove nohz_cpu_mask\n  rcu: Document interpretation of RCU-lockdep splats\n  rcu: Allow rcutorture\u0027s stat_interval parameter to be changed at runtime\n  ...\n"
    },
    {
      "commit": "982653009b883ef1529089e3e6f1ae2fee41cbe2",
      "tree": "eec3b1fe947d442ee204a2d648133bc5223e5c59",
      "parents": [
        "37d96c28ecf0af1215bb6bbf580dbb1fabb5a6ec",
        "c020570138f5d9cb1fc0a853f9cf9e641178b5c5"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Oct 26 16:11:53 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Oct 26 16:11:53 2011 +0200"
      },
      "message": "Merge branch \u0027core-iommu-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip\n\n* \u0027core-iommu-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:\n  x86, ioapic: Consolidate the explicit EOI code\n  x86, ioapic: Restore the mask bit correctly in eoi_ioapic_irq()\n  x86, kdump, ioapic: Reset remote-IRR in clear_IO_APIC\n  iommu: Rename the DMAR and INTR_REMAP config options\n  x86, ioapic: Define irq_remap_modify_chip_defaults()\n  x86, msi, intr-remap: Use the ioapic set affinity routine\n  iommu: Cleanup ifdefs in detect_intel_iommu()\n  iommu: No need to set dmar_disabled in check_zero_address()\n  iommu: Move IOMMU specific code to intel-iommu.c\n  intr_remap: Call dmar_dev_scope_init() explicitly\n  x86, x2apic: Enable the bios request for x2apic optout\n"
    },
    {
      "commit": "820bc19df20e1927054860513322742de5ebb6b3",
      "tree": "bef52b77d94e09491ec81a7f7c7f6d30347d13b5",
      "parents": [
        "cc667a72d471e79fd8e5e291ea115923cf44dca0"
      ],
      "author": {
        "name": "Alexander Stein",
        "email": "alexander.stein@systec-electronic.com",
        "time": "Wed Oct 26 09:58:45 2011 +0200"
      },
      "committer": {
        "name": "Takashi Iwai",
        "email": "tiwai@suse.de",
        "time": "Wed Oct 26 15:17:53 2011 +0200"
      },
      "message": "ALSA: hda - Fix typo\n\nSigned-off-by: Alexander Stein \u003calexander.stein@systec-electronic.com\u003e\nSigned-off-by: Takashi Iwai \u003ctiwai@suse.de\u003e\n"
    },
    {
      "commit": "efb8d21b2c6db3497655cc6a033ae8a9883e4063",
      "tree": "a14a0dbb9fec3a6db5e542ba7ed4a49681706420",
      "parents": [
        "3cb603284b3d256ae9ae9e65887cee8416bfef15",
        "d208a3bf77f902283894f546b6b5383202cf7882"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Oct 26 15:11:09 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Oct 26 15:11:09 2011 +0200"
      },
      "message": "Merge branch \u0027tty-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty\n\n* \u0027tty-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)\n  TTY: serial_core: Fix crash if DCD drop during suspend\n  tty/serial: atmel_serial: bootconsole removed from auto-enumerates\n  Revert \"TTY: call tty_driver_lookup_tty unconditionally\"\n  tty/serial: atmel_serial: add device tree support\n  tty/serial: atmel_serial: auto-enumerate ports\n  tty/serial: atmel_serial: whitespace and braces modifications\n  tty/serial: atmel_serial: change platform_data variable name\n  tty/serial: RS485 bindings for device tree\n  TTY: call tty_driver_lookup_tty unconditionally\n  TTY: pty, release tty in all ptmx_open fail paths\n  TTY: make tty_add_file non-failing\n  TTY: drop driver reference in tty_open fail path\n  8250_pci: Fix kernel panic when pch_uart is disabled\n  h8300: drivers/serial/Kconfig was moved\n  parport_pc: release IO region properly if unsupported ITE887x card is found\n  tty: Support compat_ioctl get/set termios_locked\n  hvc_console: display printk messages on console.\n  TTY: snyclinkmp: forever loop in tx_load_dma_buffer()\n  tty/n_gsm: avoid fifo overflow in gsm_dlci_data_output\n  tty/n_gsm: fix a bug in gsm_dlci_data_output (adaption \u003d 2 case)\n  ...\n\nFix up Conflicts in:\n - drivers/tty/serial/8250_pci.c\n\tTrivial conflict with removed duplicate device ID\n - drivers/tty/serial/atmel_serial.c\n\tAnnoying silly conflict between \"specify the port num via\n\tplatform_data\" and other changes to atmel_console_init\n"
    },
    {
      "commit": "3cb603284b3d256ae9ae9e65887cee8416bfef15",
      "tree": "a7012e9ca585c4ada1ff8896de326f540b460f80",
      "parents": [
        "2355e4290336fcda4b4a799448f745155a000226",
        "c5794cfac09a585945e1632451900594db19393b"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Oct 26 14:52:52 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Oct 26 14:52:52 2011 +0200"
      },
      "message": "Merge branch \u0027hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging\n\n* \u0027hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (26 commits)\n  hwmon: (w83627ehf) Better fix for negative temperature values\n  hwmon: (w83627ehf) Uninline is_word_sized\n  hwmon: (lm75) Document why clones are not detected\n  hwmon: (w83627ehf) Move fan pins check to a separate function\n  hwmon: (w83627ehf) Skip reading unused voltage registers\n  hwmon: (lm75) Add support for Analog Devices ADT75\n  hwmon: (pmbus_core) Simplify sign extensions\n  hwmon: (pmbus) Add support for Lineage Power DC-DC converters\n  hwmon: (pmbus/ltc2978) Add support for LTC3880 to LTC2978 driver\n  hwmon: (pmbus/ltc2978) Explicit driver for LTC2978\n  hwmon: (pmbus) Add support for TEMP2 peak attributes\n  hwmon: AD7314 driver (ported from IIO)\n  hwmon: (pmbus) Add support for Intersil power management chips\n  hwmon: (pmbus) Always call _pmbus_read_byte in core driver\n  hwmon: (pmbus) Replace EINVAL return codes with more appropriate errors\n  hwmon: (pmbus) Provide more documentation\n  hwmon/f71882fg: Make the decision wether to register fan attr. per fan\n  hwmon/f71882fg: Add a f71882fg_create_fan_sysfs_files helper function\n  hwmon/f71882fg: Make all fan/pwm attr tables 2 dimensional\n  hwmon: (exynos4_tmu) Remove IRQF_DISABLED\n  ...\n"
    },
    {
      "commit": "e33bae14fd8da449d735552d78e6dd33ece0458c",
      "tree": "048c062c47f7bfdb0ea8ad19c5b5849a58ff3022",
      "parents": [
        "7670c7010c7b367ca40c3aba02afb36149764a6e",
        "14211d026dad4641d4dffd7a4c520bcaa8fd4a65"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Oct 26 14:20:53 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Oct 26 14:20:53 2011 +0200"
      },
      "message": "Merge branch \u0027for-linus\u0027 of git://github.com/ericvh/linux\n\n* \u0027for-linus\u0027 of git://github.com/ericvh/linux:\n  9p: fix 9p.txt to advertise msize instead of maxdata\n  net/9p: Convert net/9p protocol dumps to tracepoints\n  fs/9p: change an int to unsigned int\n  fs/9p: Cleanup option parsing in 9p\n  9p: move dereference after NULL check\n  fs/9p: inode file operation is properly initialized init_special_inode\n  fs/9p: Update zero-copy implementation in 9p\n"
    },
    {
      "commit": "7e0bb71e75020348bee523720a0c2f04cc72f540",
      "tree": "1a22d65bbce34e8cc0f82c543c9486ffb58332f7",
      "parents": [
        "b9e2780d576a010d4aba1e69f247170bf3718d6b",
        "0ab1e79b825a5cd8aeb3b34d89c9a89dea900056"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 15:18:39 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 15:18:39 2011 +0200"
      },
      "message": "Merge branch \u0027pm-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm\n\n* \u0027pm-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits)\n  PM / Clocks: Remove redundant NULL checks before kfree()\n  PM / Documentation: Update docs about suspend and CPU hotplug\n  ACPI / PM: Add Sony VGN-FW21E to nonvs blacklist.\n  ARM: mach-shmobile: sh7372 A4R support (v4)\n  ARM: mach-shmobile: sh7372 A3SP support (v4)\n  PM / Sleep: Mark devices involved in wakeup signaling during suspend\n  PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image\n  PM / Hibernate: Do not initialize static and extern variables to 0\n  PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too\n  PM / Hibernate: Add resumedelay kernel param in addition to resumewait\n  MAINTAINERS: Update linux-pm list address\n  PM / ACPI: Blacklist Vaio VGN-FW520F machine known to require acpi_sleep\u003dnonvs\n  PM / ACPI: Blacklist Sony Vaio known to require acpi_sleep\u003dnonvs\n  PM / Hibernate: Add resumewait param to support MMC-like devices as resume file\n  PM / Hibernate: Fix typo in a kerneldoc comment\n  PM / Hibernate: Freeze kernel threads after preallocating memory\n  PM: Update the policy on default wakeup settings\n  PM / VT: Cleanup #if defined uglyness and fix compile error\n  PM / Suspend: Off by one in pm_suspend()\n  PM / Hibernate: Include storage keys in hibernation image on s390\n  ...\n"
    },
    {
      "commit": "c9d6329c35869ebf2ff88a5831e8073d3365e8bd",
      "tree": "735df8ad43f404ca031dd2cf2040d74538958b47",
      "parents": [
        "4e7e2a2008f5d8c49791c412849d5b0232d39bb3",
        "ad7761ab3adc03fbf2cca8e3c84344175d876c40"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 14:04:01 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 14:04:01 2011 +0200"
      },
      "message": "Merge branch \u0027for-next\u0027 of git://git.linaro.org/people/triad/linux-pinctrl\n\n* \u0027for-next\u0027 of git://git.linaro.org/people/triad/linux-pinctrl:\n  pinctrl/sirf: fix sirfsoc_get_group_pins prototype\n  pinctrl: Don\u0027t copy function name when requesting a pin\n  pinctrl: Don\u0027t copy pin names when registering them\n  pinctrl: Remove unsafe __refdata\n  pinctrl: get_group_pins() const fixes\n  pinctrl: add a driver for the CSR SiRFprimaII pinmux\n  pinctrl: add a driver for the U300 pinmux\n  drivers: create a pin control subsystem\n"
    },
    {
      "commit": "8a9ea3237e7eb5c25f09e429ad242ae5a3d5ea22",
      "tree": "a0a63398a9983667d52cbbbf4e2405b4f22b1d83",
      "parents": [
        "1be025d3cb40cd295123af2c394f7229ef9b30ca",
        "8b3408f8ee994973869d8ba32c5bf482bc4ddca4"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 13:25:22 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 13:25:22 2011 +0200"
      },
      "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)\n  dp83640: free packet queues on remove\n  dp83640: use proper function to free transmit time stamping packets\n  ipv6: Do not use routes from locally generated RAs\n  |PATCH net-next] tg3: add tx_dropped counter\n  be2net: don\u0027t create multiple RX/TX rings in multi channel mode\n  be2net: don\u0027t create multiple TXQs in BE2\n  be2net: refactor VF setup/teardown code into be_vf_setup/clear()\n  be2net: add vlan/rx-mode/flow-control config to be_setup()\n  net_sched: cls_flow: use skb_header_pointer()\n  ipv4: avoid useless call of the function check_peer_pmtu\n  TCP: remove TCP_DEBUG\n  net: Fix driver name for mdio-gpio.c\n  ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT\n  rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces\n  ipv4: fix ipsec forward performance regression\n  jme: fix irq storm after suspend/resume\n  route: fix ICMP redirect validation\n  net: hold sock reference while processing tx timestamps\n  tcp: md5: add more const attributes\n  Add ethtool -g support to virtio_net\n  ...\n\nFix up conflicts in:\n - drivers/net/Kconfig:\n\tThe split-up generated a trivial conflict with removal of a\n\tstale reference to Documentation/networking/net-modules.txt.\n\tRemove it from the new location instead.\n - fs/sysfs/dir.c:\n\tFairly nasty conflicts with the sysfs rb-tree usage, conflicting\n\twith Eric Biederman\u0027s changes for tagged directories.\n"
    },
    {
      "commit": "1be025d3cb40cd295123af2c394f7229ef9b30ca",
      "tree": "5dc14e1ea412cc7fdc3e563ad23187059fe8bfb5",
      "parents": [
        "2d03423b2319cc854adeb28a03f65de5b5e0ab63",
        "a2c76b83fdd763c826f38a55127ccf25708099ce"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 12:23:15 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 12:23:15 2011 +0200"
      },
      "message": "Merge branch \u0027usb-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb\n\n* \u0027usb-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (260 commits)\n  usb: renesas_usbhs: fixup inconsistent return from usbhs_pkt_push()\n  usb/isp1760: Allow to optionally trigger low-level chip reset via GPIOLIB.\n  USB: gadget: midi: memory leak in f_midi_bind_config()\n  USB: gadget: midi: fix range check in f_midi_out_open()\n  QE/FHCI: fixed the CONTROL bug\n  usb: renesas_usbhs: tidyup for smatch warnings\n  USB: Fix USB Kconfig dependency problem on 85xx/QoirQ platforms\n  EHCI: workaround for MosChip controller bug\n  usb: gadget: file_storage: fix race on unloading\n  USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers\n  USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structure\n  USB: ftdi_sio.c: Fill LSR fields of the ftdi async_icount structure\n  USB: ftdi_sio.c:Fill TX field of the ftdi async_icount structure\n  USB: ftdi_sio.c: Fill the RX field of the ftdi async_icount structure\n  USB: ftdi_sio.c: Basic icount infrastructure for ftdi_sio\n  usb/isp1760: Let OF bindings depend on general CONFIG_OF instead of PPC_OF .\n  USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board\n  USB: Fix runtime wakeup on OHCI\n  xHCI/USB: Make xHCI driver have a BOS descriptor.\n  usb: gadget: add new usb gadget for ACM and mass storage\n  ...\n"
    },
    {
      "commit": "2d03423b2319cc854adeb28a03f65de5b5e0ab63",
      "tree": "20d9ddb661f3247f5dfaa6da8212123ed14a24c4",
      "parents": [
        "59e52534172d845ebffb0d7e85fc56fb7b857051",
        "2bbcb8788311a40714b585fc11b51da6ffa2ab92"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 12:13:59 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 12:13:59 2011 +0200"
      },
      "message": "Merge branch \u0027driver-core-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core\n\n* \u0027driver-core-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits)\n  mm: memory hotplug: Check if pages are correctly reserved on a per-section basis\n  Revert \"memory hotplug: Correct page reservation checking\"\n  Update email address for stable patch submission\n  dynamic_debug: fix undefined reference to `__netdev_printk\u0027\n  dynamic_debug: use a single printk() to emit messages\n  dynamic_debug: remove num_enabled accounting\n  dynamic_debug: consolidate repetitive struct _ddebug descriptor definitions\n  uio: Support physical addresses \u003e32 bits on 32-bit systems\n  sysfs: add unsigned long cast to prevent compile warning\n  drivers: base: print rejected matches with DEBUG_DRIVER\n  memory hotplug: Correct page reservation checking\n  memory hotplug: Refuse to add unaligned memory regions\n  remove the messy code file Documentation/zh_CN/SubmitChecklist\n  ARM: mxc: convert device creation to use platform_device_register_full\n  new helper to create platform devices with dma mask\n  docs/driver-model: Update device class docs\n  docs/driver-model: Document device.groups\n  kobj_uevent: Ignore if some listeners cannot handle message\n  dynamic_debug: make netif_dbg() call __netdev_printk()\n  dynamic_debug: make netdev_dbg() call __netdev_printk()\n  ...\n"
    },
    {
      "commit": "59e52534172d845ebffb0d7e85fc56fb7b857051",
      "tree": "49552e03f1bdb413cd8b5f7542e91770688d7047",
      "parents": [
        "73692d9bb58ecc2fa73f4b2bfcf6eadaa6d49a26",
        "0d89e54c8249645404283436d952afc261a04e1e"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 12:11:02 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 12:11:02 2011 +0200"
      },
      "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits)\n  MAINTAINERS: linux-m32r is moderated for non-subscribers\n  linux@lists.openrisc.net is moderated for non-subscribers\n  Drop default from \"DM365 codec select\" choice\n  parisc: Kconfig: cleanup Kernel page size default\n  Kconfig: remove redundant CONFIG_ prefix on two symbols\n  cris: remove arch/cris/arch-v32/lib/nand_init.S\n  microblaze: add missing CONFIG_ prefixes\n  h8300: drop puzzling Kconfig dependencies\n  MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers\n  tty: drop superfluous dependency in Kconfig\n  ARM: mxc: fix Kconfig typo \u0027i.MX51\u0027\n  Fix file references in Kconfig files\n  aic7xxx: fix Kconfig references to READMEs\n  Fix file references in drivers/ide/\n  thinkpad_acpi: Fix printk typo \u0027bluestooth\u0027\n  bcmring: drop commented out line in Kconfig\n  btmrvl_sdio: fix typo \u0027btmrvl_sdio_sd6888\u0027\n  doc: raw1394: Trivial typo fix\n  CIFS: Don\u0027t free volume_info-\u003eUNC until we are entirely done with it.\n  treewide: Correct spelling of successfully in comments\n  ...\n"
    },
    {
      "commit": "31dced41c6822ce751c033a53502ea4d8d399422",
      "tree": "53f6abc56c517a6dcb790bf9b3a71ac42694233a",
      "parents": [
        "7c1953ddb609f1c161bf4a11a5e4e4577e82e557",
        "b3aec7b686329e6bb65aa08c7f9458f7fd512f06"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 12:03:13 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 12:03:13 2011 +0200"
      },
      "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (61 commits)\n  HID: hid-magicmouse: Magic Trackpad has 1 button, not 2\n  HID: Add device IDs for more SJOY adapters\n  HID: primax: remove spurious dependency\n  HID: support primax keyboards violating USB HID spec\n  HID: usbhid: cancel timer for retry synchronously\n  HID: wacom: Set input bits before registration\n  HID: consolidate MacbookAir 4,1 mappings\n  HID: MacbookAir4,1 and MacbookAir4,2 need entry in hid_mouse_ignore_list[]\n  HID: Add support MacbookAir 4,1 keyboard\n  HID: hidraw: open count should not increase if error\n  HID: hiddev: potential info leak in hiddev_ioctl()\n  HID: multitouch: decide if hid-multitouch needs to handle mt devices\n  HID: add autodetection of multitouch devices\n  HID: \"hid-logitech\" driver with Logitech Driving Force GT\n  HID: hid-logitech-dj: fix off by one\n  HID: hidraw: protect hidraw_disconnect() better\n  HID: hid-multitouch: add support for the IDEACOM 6650 chip\n  HID: Add full support for Logitech Unifying receivers\n  HID: hidraw: free list for all error in hidraw_open\n  HID: roccat: Kone now reports external profile changes via roccat device\n  ...\n"
    },
    {
      "commit": "1bc67188c3843b8e16caaa8624beeb0e2823c1f8",
      "tree": "76299c9a161e2f179bf8bbd6c2b6c60191a9c76d",
      "parents": [
        "36b8d186e6cc8e32cb5227f5645a58e1bc0af190",
        "bdf4e9482360a3ddc1619efbd5d1c928ede8c3fa"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 10:18:27 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 10:18:27 2011 +0200"
      },
      "message": "Merge branch \u0027for-linus\u0027 of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm\n\n* \u0027for-linus\u0027 of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (81 commits)\n  ARM: 7133/1: SMP: fix per cpu timer setup before the cpu is marked online\n  ARM: 7129/1: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY\n  ARM: 7136/1: pl330: Fix a race condition\n  ARM: smp: fix clipping of number of CPUs\n  ARM: 7137/1: Fix error upon adding LL debug\n  ARM: Add a few machine types to mach-types\n  ARM: 7130/1: dev_archdata: add private iommu extension\n  ARM: 7125/1: Add unwinding annotations for 64bit division functions\n  ARM: 7120/1: remove bashism in check for multiple zreladdrs\n  ARM: 7118/1: rename temp variable in read*_relaxed()\n  ARM: 6217/4: mach-realview: expose PB1176 ROM using physmap and map_rom\n  ARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stage\n  ARM: 7062/1: cache: detect PIPT I-cache using CTR\n  ARM: platform fixups: remove mdesc argument to fixup function\n  ARM: 7017/1: Use generic BUG() handler\n  ARM: 7102/1: mach-integrator: update defconfig\n  ARM: 7087/2: mach-integrator: get timer frequency from clock\n  ARM: 7086/2: mach-integrator: modernize clock event registration\n  ARM: 7085/2: mach-integrator: clockevent supports oneshot mode\n  ARM: 7084/1: mach-integrator: retire some timer macros\n  ...\n"
    },
    {
      "commit": "b0eae38cebc54e618896d3e6a799939da51a8cac",
      "tree": "a99546b955b9066616d88526b050902fedb6f44a",
      "parents": [
        "3ee72ca99288f1de95ec9c570e43f531c8799f06",
        "b55ebc27b0a54ff4cdbfdcb218a85f96e502db3c",
        "e00ddc9b8f978ffbc6c212f780a2bb83aafe2fbd",
        "0db3bfc72adf0cb70f08dfe92e4040f64e25e205",
        "3200a6a5fa36585ec1c547d4fefeb622ae02c5ec",
        "b22e00f3ece8f8ca9d7b9772d750db380e742bbb"
      ],
      "author": {
        "name": "Jiri Kosina",
        "email": "jkosina@suse.cz",
        "time": "Tue Oct 25 09:54:16 2011 +0200"
      },
      "committer": {
        "name": "Jiri Kosina",
        "email": "jkosina@suse.cz",
        "time": "Tue Oct 25 09:54:16 2011 +0200"
      },
      "message": "Merge branches \u0027acrux\u0027, \u0027logitech\u0027, \u0027multitouch\u0027, \u0027roccat\u0027 and \u0027wiimote\u0027 into for-linus\n"
    },
    {
      "commit": "36b8d186e6cc8e32cb5227f5645a58e1bc0af190",
      "tree": "1000ad26e189e6ff2c53fb7eeff605f59c7ad94e",
      "parents": [
        "cd85b557414fe4cd44ea6608825e96612a5fe2b2",
        "c45ed235abf1b0b6666417e3c394f18717976acd"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 09:45:31 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 25 09:45:31 2011 +0200"
      },
      "message": "Merge branch \u0027next\u0027 of git://selinuxproject.org/~jmorris/linux-security\n\n* \u0027next\u0027 of git://selinuxproject.org/~jmorris/linux-security: (95 commits)\n  TOMOYO: Fix incomplete read after seek.\n  Smack: allow to access /smack/access as normal user\n  TOMOYO: Fix unused kernel config option.\n  Smack: fix: invalid length set for the result of /smack/access\n  Smack: compilation fix\n  Smack: fix for /smack/access output, use string instead of byte\n  Smack: domain transition protections (v3)\n  Smack: Provide information for UDS getsockopt(SO_PEERCRED)\n  Smack: Clean up comments\n  Smack: Repair processing of fcntl\n  Smack: Rule list lookup performance\n  Smack: check permissions from user space (v2)\n  TOMOYO: Fix quota and garbage collector.\n  TOMOYO: Remove redundant tasklist_lock.\n  TOMOYO: Fix domain transition failure warning.\n  TOMOYO: Remove tomoyo_policy_memory_lock spinlock.\n  TOMOYO: Simplify garbage collector.\n  TOMOYO: Fix make namespacecheck warnings.\n  target: check hex2bin result\n  encrypted-keys: check hex2bin result\n  ...\n"
    },
    {
      "commit": "06afb1a087d49ae0f676b2e5b9ffe5f4b3aba355",
      "tree": "5377c063ed07aed23eb9da0bfecfca307f8da0bc",
      "parents": [
        "c3b92c8787367a8bb53d57d9789b558f1295cc96",
        "7816e210a7e4681fb775bbb57bffbef3cc4aa456",
        "f73765fcb8bb79e80af58059441eb931679e68c0",
        "70e5f5efcc933af55a3a18efdb3b2edd3eb510ec",
        "91c2ebb90b1890abc648ba9dec5608cbc97e1cb9",
        "daece59689e76ed55d8863cae04993679a8e844e",
        "d7c5d0dcffb3b5702d9477faceff4b8398e6fed0",
        "a06f916b7a9b57447ceb875eb0a89f1a66b31bca"
      ],
      "author": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Tue Oct 25 08:19:29 2011 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Tue Oct 25 08:19:29 2011 +0100"
      },
      "message": "Merge branches \u0027arnd-randcfg-fixes\u0027, \u0027debug\u0027, \u0027io\u0027 (early part), \u0027l2x0\u0027, \u0027p2v\u0027, \u0027pgt\u0027 (early part) and \u0027smp\u0027 into for-linus\n"
    },
    {
      "commit": "1805b2f04855f07afe3a71d620a68f483b0ed74f",
      "tree": "b823b90f37f5404fcaef70f785c70112ca74a329",
      "parents": [
        "78d81d15b74246c7cedf84894434890b33da3907",
        "f42af6c486aa5ca6ee62800cb45c5b252020509d"
      ],
      "author": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Mon Oct 24 18:18:09 2011 -0400"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Mon Oct 24 18:18:09 2011 -0400"
      },
      "message": "Merge branch \u0027master\u0027 of ra.kernel.org:/pub/scm/linux/kernel/git/davem/net\n"
    },
    {
      "commit": "2b0fce8da2f5b6dc9661be540982416a9e2267f8",
      "tree": "913289f7c1d6615116d699db402d6d12816ac523",
      "parents": [
        "2bf6f675fa1a0f80b21aff20e6c21e87d6a7c9c9"
      ],
      "author": {
        "name": "Grant Likely",
        "email": "grant.likely@secretlab.ca",
        "time": "Mon Oct 24 11:09:14 2011 +0200"
      },
      "committer": {
        "name": "Grant Likely",
        "email": "grant.likely@secretlab.ca",
        "time": "Mon Oct 24 23:48:01 2011 +0200"
      },
      "message": "Devicetree: Expand on ARM Primecell binding documentation\n\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n"
    },
    {
      "commit": "426343ef34fac426e619176c84cb2e263b9ed23d",
      "tree": "829427f02e62a744ffe2c450462353136e11b6d5",
      "parents": [
        "03f5de2bb7125e537c81030925f38674307e6a71"
      ],
      "author": {
        "name": "Jean Delvare",
        "email": "khali@linux-fr.org",
        "time": "Thu Oct 13 17:15:11 2011 -0400"
      },
      "committer": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Mon Oct 24 11:09:47 2011 -0700"
      },
      "message": "hwmon: (lm75) Document why clones are not detected\n\nExplain why clones of the LM75 are generally not detected by the\ndriver, and why this isn\u0027t going to change. Also update the\ndocumentation to reflect the list of chip names currently supported by\nthe driver.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n"
    },
    {
      "commit": "e96f9d89e6213c7630a3323cd0c754e7f2619564",
      "tree": "29c4f0055ae232c6df8d2206ece55a973ed857d1",
      "parents": [
        "1af1f5313cfea85a185c7bbb5258f7856fc8fea7"
      ],
      "author": {
        "name": "Michael Hennerich",
        "email": "michael.hennerich@analog.com",
        "time": "Thu Oct 13 04:43:31 2011 -0400"
      },
      "committer": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Mon Oct 24 11:09:45 2011 -0700"
      },
      "message": "hwmon: (lm75) Add support for Analog Devices ADT75\n\nAdd datasheet reference and device ID for ADT75.\n\nThe ADT75, like some other LM75 derivatives, needs to be instantiated\nusing methods 1, 2, or 4.\nFor more information see Documentation/i2c/instantiating-devices.\n\nSigned-off-by: Michael Hennerich \u003cmichael.hennerich@analog.com\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n"
    },
    {
      "commit": "bc365a7f3c0d5b5b2a642e6646098b306b6faa4d",
      "tree": "d969b36df34a1023b923b5092cde33c088807f4f",
      "parents": [
        "ddfb41ca2a33c9f5053126324597510974724a1f"
      ],
      "author": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Thu Sep 15 10:43:40 2011 -0700"
      },
      "committer": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Mon Oct 24 11:09:44 2011 -0700"
      },
      "message": "hwmon: (pmbus) Add support for Lineage Power DC-DC converters\n\nAdd device IDs and reference to datasheets for Lineage Power DC-DC converters.\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nReviewed-by: Robert Coulson \u003crobert.coulson@ericsson.com\u003e\n"
    },
    {
      "commit": "ddfb41ca2a33c9f5053126324597510974724a1f",
      "tree": "d9f13049c8532cc5b0050de61c0ad5d90d6af5fe",
      "parents": [
        "c3ff9a674c2313d4f28e38d384b18b561b313eb7"
      ],
      "author": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Sun Sep 11 20:31:09 2011 -0700"
      },
      "committer": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Mon Oct 24 11:09:43 2011 -0700"
      },
      "message": "hwmon: (pmbus/ltc2978) Add support for LTC3880 to LTC2978 driver\n\nThe LTC3880 PMBus command set is comparable to LTC2978. Add support for it\nto the LTC2978 driver.\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nReviewed-by: Robert Coulson \u003crobert.coulson@ericsson.com\u003e\n"
    },
    {
      "commit": "c3ff9a674c2313d4f28e38d384b18b561b313eb7",
      "tree": "6c8dea7a9c7f43e471abac7ad56e882b74cc3b8d",
      "parents": [
        "3d790287c4e6caa8790421737b1cf8f0a6531559"
      ],
      "author": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Fri Sep 02 09:58:37 2011 -0700"
      },
      "committer": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Mon Oct 24 11:09:42 2011 -0700"
      },
      "message": "hwmon: (pmbus/ltc2978) Explicit driver for LTC2978\n\nProvide explicit driver for LTC2978 to enable support for minimum and peak\nattributes. Remove ltc2978 chip id from generic pmbus driver.\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nReviewed-by: Robert Coulson \u003crobert.coulson@ericsson.com\u003e\n"
    },
    {
      "commit": "4f3a659581cabf1be441d6467b523be914615496",
      "tree": "7d5d581f10409b883fab255f7ccede8692497b2b",
      "parents": [
        "200855e52db1b1834121ba57fbd89c5b4911e02c"
      ],
      "author": {
        "name": "Jonathan Cameron",
        "email": "jic23@cam.ac.uk",
        "time": "Thu Sep 29 12:50:04 2011 -0400"
      },
      "committer": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Mon Oct 24 11:09:41 2011 -0700"
      },
      "message": "hwmon: AD7314 driver (ported from IIO)\n\nDriver for AD7314, ADT7301, and ADT7302, ported from IIO.\n\nCurrently dropped power down mode support.\n\nSigned-off-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\n[guenter.roeck@ericsson.com: Added MODULE_DEVICE_TABLE]\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n"
    },
    {
      "commit": "200855e52db1b1834121ba57fbd89c5b4911e02c",
      "tree": "fa0c572e5c40b8558ae2e8fc5069a41c2c503668",
      "parents": [
        "da8e48ab483e1f54c1099bed91bfd2c302bc7ddf"
      ],
      "author": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Fri Jul 29 22:21:53 2011 -0700"
      },
      "committer": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Mon Oct 24 11:09:40 2011 -0700"
      },
      "message": "hwmon: (pmbus) Add support for Intersil power management chips\n\nAdd support for Intersil / Zilker Labs ZL2004, ZL2006, ZL2008, ZL2105, ZL2106,\nZL6100, and ZL6105.\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nReviewed-by: Robert Coulson \u003crobert.coulson@ericsson.com\u003e\n"
    },
    {
      "commit": "ced29d422557feb4230ea6b0067f1e24c5bd83f7",
      "tree": "ddd6665b703ea3496f4ed219bb758062ae2a7cef",
      "parents": [
        "6543439f19b829f94a37e1ea277ead76e93b917f"
      ],
      "author": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Sat Aug 27 11:42:30 2011 -0700"
      },
      "committer": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Mon Oct 24 11:09:38 2011 -0700"
      },
      "message": "hwmon: (pmbus) Provide more documentation\n\nProvide more documentation describing PMBus driver functionality and the API\nbetween the PMBus core driver and PMBus chip drivers.\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nReviewed-by: Robert Coulson \u003crobert.coulson@ericsson.com\u003e\n"
    },
    {
      "commit": "9d97e5c81e15afaef65d00f077f863c94f750839",
      "tree": "01df55fd37f2432ec03c29bf55cc97dfdb6f1b60",
      "parents": [
        "5cf231a346fb80d7945aa46e90186a068a3a001b"
      ],
      "author": {
        "name": "Donggeun Kim",
        "email": "dg77.kim@samsung.com",
        "time": "Wed Sep 07 18:49:08 2011 +0900"
      },
      "committer": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Mon Oct 24 11:09:35 2011 -0700"
      },
      "message": "hwmon: Add driver for EXYNOS4 TMU\n\nThis patch allows to read temperature\nfrom TMU(Thermal Management Unit) of SAMSUNG EXYNOS4 series of SoC.\n\nSigned-off-by: Donggeun Kim \u003cdg77.kim@samsung.com\u003e\nSigned-off-by: MyungJoo Ham \u003cmyungjoo.ham@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n"
    },
    {
      "commit": "5cf231a346fb80d7945aa46e90186a068a3a001b",
      "tree": "642f84017b93f745b72360b7b2d619ec2403224f",
      "parents": [
        "c5e6763667ffc94eaad4634841cb1b7ecd951fb7"
      ],
      "author": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Thu Jul 14 11:55:35 2011 -0700"
      },
      "committer": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Mon Oct 24 11:09:35 2011 -0700"
      },
      "message": "hwmon: (pmbus/adm1275) Add support for ADM1276\n\nADM1276 is mostly compatible to ADM1275, with added support for input power\nmeasurement. Add support for it to the ADM1275 driver.\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n"
    },
    {
      "commit": "c5e6763667ffc94eaad4634841cb1b7ecd951fb7",
      "tree": "9f12484699dc25462e3275fba42bba65f47644d6",
      "parents": [
        "866cf12a0eab65f94e40608bdd21ca8dea4d0ac2"
      ],
      "author": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Tue Aug 02 11:08:57 2011 -0700"
      },
      "committer": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Mon Oct 24 11:09:34 2011 -0700"
      },
      "message": "hwmon: (pmbus/adm1275) Add support for second current limit\n\nADM1275 supports a second current limit, which can be configured as either lower\nor upper limit. Add support for it and report it as either lower or upper\ncritical current limit.\n\nAlso replace error return code EINVAL for unsupported pages with ENXIO as this\nis more appropriate for the observed condition.\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n"
    },
    {
      "commit": "14211d026dad4641d4dffd7a4c520bcaa8fd4a65",
      "tree": "6830e3ee3b4c9d90a3200f4cd3857d5afb606fcf",
      "parents": [
        "348b59012e5c6402741d067cf6eeeb6271999d06"
      ],
      "author": {
        "name": "Nicolae Mogoreanu",
        "email": "mogoreanu@gmail.com",
        "time": "Mon Oct 03 20:03:53 2011 +0000"
      },
      "committer": {
        "name": "Eric Van Hensbergen",
        "email": "ericvh@gmail.com",
        "time": "Mon Oct 24 11:13:12 2011 -0500"
      },
      "message": "9p: fix 9p.txt to advertise msize instead of maxdata\n\n9p.txt advertises that maxdata mount option should be used to specify\nmsize, in the code though we use msize option and completely ignore\nmaxdata if passed\n\nSigned-off-by: Nicolae Mogoreanu \u003cmogoreanu@gmail.com\u003e\nSigned-off-by: Eric Van Hensbergen \u003cericvh@gmail.com\u003e\n"
    },
    {
      "commit": "2bf6f675fa1a0f80b21aff20e6c21e87d6a7c9c9",
      "tree": "ef49d741211dcc4f38636b5c422c9c346da09adf",
      "parents": [
        "5762c20593b6b959f1470dc6f1ff4ca4d9570f8d",
        "c3b92c8787367a8bb53d57d9789b558f1295cc96"
      ],
      "author": {
        "name": "Grant Likely",
        "email": "grant.likely@secretlab.ca",
        "time": "Mon Oct 24 17:03:35 2011 +0200"
      },
      "committer": {
        "name": "Grant Likely",
        "email": "grant.likely@secretlab.ca",
        "time": "Mon Oct 24 17:03:35 2011 +0200"
      },
      "message": "Merge commit \u0027v3.1\u0027 into devicetree/next\n"
    },
    {
      "commit": "7fef9fc83fbd7293ea9fe665d14046422ebf4219",
      "tree": "ad1283fc2df4d65cdb15e8b86c7e9487d64176d5",
      "parents": [
        "d11c78e97e1d46a93eb468794da82a090143a72e"
      ],
      "author": {
        "name": "Srivatsa S. Bhat",
        "email": "srivatsa.bhat@linux.vnet.ibm.com",
        "time": "Wed Oct 19 23:59:05 2011 +0200"
      },
      "committer": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Sat Oct 22 00:22:28 2011 +0200"
      },
      "message": "PM / Documentation: Update docs about suspend and CPU hotplug\n\nUpdate the documentation about the interaction between the suspend (S3) call\npath and the CPU hotplug infrastructure.\nThis patch focusses only on the activities of the freezer, cpu hotplug and\nthe notifications involved. It outlines how regular CPU hotplug differs from\nthe way it is invoked during suspend and also tries to explain the locking\ninvolved. In addition to that, it discusses the issue of microcode update\nduring CPU hotplug operations.\n\nSigned-off-by: Srivatsa S. Bhat \u003csrivatsa.bhat@linux.vnet.ibm.com\u003e\nSigned-off-by: Rafael J. Wysocki \u003crjw@sisk.pl\u003e\n"
    },
    {
      "commit": "51e3137b9b6113c7e12cf0a0dc82238854a86712",
      "tree": "29aacb2bdfb421daefc22dd9a7274c2803feb688",
      "parents": [
        "a9097a9666fd7b08fd2a152b2a0b6c8d48639bb2"
      ],
      "author": {
        "name": "Giuseppe CAVALLARO",
        "email": "peppe.cavallaro@st.com",
        "time": "Tue Oct 18 00:01:20 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Oct 19 19:24:16 2011 -0400"
      },
      "message": "stmmac: update the driver version and doc (V4)\n\nSigned-off-by: Giuseppe Cavallaro \u003cpeppe.cavallaro@st.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "0331bbf3c6fd9997e5f0d165840229ccfeba6548",
      "tree": "3aec3b01a2dc15dc39193034775a8b15d6487299",
      "parents": [
        "631180aca723cb92e128fdac5fd144e913ca84e5"
      ],
      "author": {
        "name": "Nicolas Ferre",
        "email": "nicolas.ferre@atmel.com",
        "time": "Wed Oct 12 18:06:56 2011 +0200"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Tue Oct 18 16:40:33 2011 -0700"
      },
      "message": "tty/serial: RS485 bindings for device tree\n\nGeneric bindings for RS485 feature included in some UARTs.\nThose bindings have to be used withing an UART device tree node.\nDocumentation updated to link to the bindings definition.\n\nSigned-off-by: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\nAcked-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "5fa224295f0e0358c8bc0e5390702338df889def",
      "tree": "400e637d22eaa95ec16790a6b6fa202535396d5c",
      "parents": [
        "0feefd97861f9b38accf09a12f8d323f2705e917"
      ],
      "author": {
        "name": "Josh Boyer",
        "email": "jwboyer@redhat.com",
        "time": "Mon Oct 17 21:16:39 2011 -0400"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Tue Oct 18 13:58:59 2011 -0700"
      },
      "message": "Update email address for stable patch submission\n\nThe stable@kernel.org email address has been replaced with the\nstable@vger.kernel.org mailing list.  Change the stable kernel rules to\nreference the new list instead of the semi-defunct email alias.\n\nCC: \u003cstable@kernel.org\u003e\nCC: \u003cstable@vger.kernel.org\u003e\nSigned-off-by: Josh Boyer \u003cjwboyer@redhat.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "27a90700a4275c5178b883b65927affdafa5185c",
      "tree": "d140a0c39bc0bf68531a165e0678be58987d2d78",
      "parents": [
        "c4253cb0748cd50060d04d838c38b07f1ad0e6e5"
      ],
      "author": {
        "name": "Kai Jiang",
        "email": "Kai.Jiang@freescale.com",
        "time": "Mon Oct 17 20:50:20 2011 +0200"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Tue Oct 18 11:18:57 2011 -0700"
      },
      "message": "uio: Support physical addresses \u003e32 bits on 32-bit systems\n\nTo support \u003e32-bit physical addresses for UIO_MEM_PHYS type we need to\nextend the width of \u0027addr\u0027 in struct uio_mem.  Numerous platforms like\nembedded PPC, ARM, and X86 have support for systems with larger physical\naddress than logical.\n\nSince \u0027addr\u0027 may contain a physical, logical, or virtual address the\neasiest solution is to just change the type to \u0027phys_addr_t\u0027 which\nshould always be greater than or equal to the sizeof(void *) such that\nit can properly hold any of the address types.\n\nFor physical address we can support up to a 44-bit physical address on a\ntypical 32-bit system as we utilize remap_pfn_range() for the mapping of\nthe memory region and pfn\u0027s are represnted by shifting the address by\nthe page size (typically 4k).\n\nSigned-off-by: Kai Jiang \u003cKai.Jiang@freescale.com\u003e\nSigned-off-by: Minghuan Lian \u003cMinghuan.Lian@freescale.com\u003e\nSigned-off-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\nSigned-off-by: Hans J. Koch \u003chjk@hansjkoch.de\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "41ebe9cde738a972d05c7282e09f5ed54cff0e8d",
      "tree": "223bf0feb7305e46989b60c3f070bef87d5fcab4",
      "parents": [
        "fd38f734cb8200529e281338514945fcbff2364b",
        "5c1381ac3f3f49ab1e0886ea8f1432c9a5def519"
      ],
      "author": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Oct 17 15:05:26 2011 -0400"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Oct 17 15:05:26 2011 -0400"
      },
      "message": "Merge branch \u0027master\u0027 of git://git.infradead.org/users/linville/wireless-next into for-davem\n"
    },
    {
      "commit": "8d4e652d1b2539196efaef051956fa29e22e9c10",
      "tree": "5c911a13f90c1a8daa4b7d7526e5dbc7278bd0ba",
      "parents": [
        "74d41f39a9c161cd0434bb13d929d75fc7be75bd"
      ],
      "author": {
        "name": "Mark Rutland",
        "email": "mark.rutland@arm.com",
        "time": "Wed Aug 17 18:03:17 2011 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Mon Oct 17 09:11:44 2011 +0100"
      },
      "message": "ARM: 7023/1: L2x0: Add interrupts property to OF binding\n\nFollowing the discussion here:\nhttp://lists.ozlabs.org/pipermail/devicetree-discuss/2011-August/007301.html\n\nThe L2x0 L2 Cache Controllers support a combined interrupt line\nwhich can be used for several events (e.g. read/write/parity errors on\ntag/data RAM, event counter increment/overflow). Unfortunately the\nOF binding added in c519ecf2 (\"ARM: 7009/1: l2x0: Add OF based\ninitialization\") does not represent the interrupt.\n\nThis patch adds an \"interrupts\" property to the L2x0 OF binding,\nrepresenting the combined interrupt line.\n\nSigned-off-by: Mark Rutland \u003cmark.rutland@arm.com\u003e\nAcked-by: Rob Herring \u003crob.herring@calxeda.com\u003e\nAcked-by: Will Deacon \u003cwill.deacon@arm.com\u003e\nCc: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nCc: Arnd Bergmann \u003carnd@arndb.de\u003e\nCc: Olof Johansson \u003colof@lixom.net\u003e\nCc: Barry Song \u003c21cnbao@gmail.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "8c369264b6de3b2ab796f330a4d85770a6b8b033",
      "tree": "d0982a16d310ce24858107db2847c7ff326d5b1d",
      "parents": [
        "d0a77454c70d0449a5f87087deb8f0cb15145e90"
      ],
      "author": {
        "name": "Rob Herring",
        "email": "rob.herring@calxeda.com",
        "time": "Wed Aug 03 18:12:05 2011 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Mon Oct 17 09:11:30 2011 +0100"
      },
      "message": "ARM: 7009/1: l2x0: Add OF based initialization\n\nThis adds probing for ARM L2x0 cache controllers via device tree. Support\nincludes the L210, L220, and PL310 controllers. The binding allows setting\nup cache RAM latencies and filter addresses (PL310 only).\n\nSigned-off-by: Rob Herring \u003crob.herring@calxeda.com\u003e\nAcked-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nAcked-by: Arnd Bergmann \u003carnd@arndb.de\u003e\nAcked-by: Olof Johansson \u003colof@lixom.net\u003e\nAcked-by: Barry Song \u003c21cnbao@gmail.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "f126f7334f72e2fd1b7a62bba20c488b86e6e7c4",
      "tree": "c56a286700df963245e56cb8caea3e96565b478b",
      "parents": [
        "bf1c138e350155edb06709c7fbf0946f252b257c"
      ],
      "author": {
        "name": "Barry Song",
        "email": "baohua.song@csr.com",
        "time": "Mon Oct 10 23:38:41 2011 +0200"
      },
      "committer": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Sun Oct 16 23:30:37 2011 +0200"
      },
      "message": "PM / Hibernate: Add resumedelay kernel param in addition to resumewait\n\nPatch \"PM / Hibernate: Add resumewait param to support MMC-like\ndevices as resume file\" added the resumewait kernel command line\noption.  The present patch adds resumedelay so that\nresumewait/delay were analogous to rootwait/delay.\n\n[rjw: Modified the subject and changelog slightly.]\n\nSigned-off-by: Barry Song \u003cbaohua.song@csr.com\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nSigned-off-by: Rafael J. Wysocki \u003crjw@sisk.pl\u003e\n"
    },
    {
      "commit": "6f8d7022a842809aeb24db1d15669198ef02c131",
      "tree": "ae1d4bacda83b3f430c644cf2479ffb1948bb30c",
      "parents": [
        "21e82808fc465b66fedaac0f4e885cafb304e843"
      ],
      "author": {
        "name": "Barry Song",
        "email": "baohua.song@csr.com",
        "time": "Thu Oct 06 20:34:46 2011 +0200"
      },
      "committer": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Sun Oct 16 23:30:36 2011 +0200"
      },
      "message": "PM / Hibernate: Add resumewait param to support MMC-like devices as resume file\n\nSome devices like MMC are async detected very slow. For example,\ndrivers/mmc/host/sdhci.c launches a 200ms delayed work to detect\nMMC partitions then add disk.\n\nWe have wait_for_device_probe() and scsi_complete_async_scans()\nbefore calling swsusp_check(), but it is not enough to wait for MMC.\n\nThis patch adds resumewait kernel param just like rootwait so\nthat we have enough time to wait until MMC is ready. The difference is\nthat we wait for resume partition whereas rootwait waits for rootfs\npartition (which may be on a different device).\n\nThis patch will make hibernation support many embedded products\nwithout SCSI devices, but with devices like MMC.\n\n[rjw: Modified the changelog slightly.]\n\nSigned-off-by: Barry Song \u003cBaohua.Song@csr.com\u003e\nReviewed-by: Valdis Kletnieks \u003cvaldis.kletnieks@vt.edu\u003e\nSigned-off-by: Rafael J. Wysocki \u003crjw@sisk.pl\u003e\n"
    },
    {
      "commit": "2aede851ddf08666f68ffc17be446420e9d2a056",
      "tree": "f63a0477c9fe618cd374065bac4cb5f172aaf7db",
      "parents": [
        "8f88893c05f2f677f18f2ce5591b4bed5d4a7535"
      ],
      "author": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Mon Sep 26 20:32:27 2011 +0200"
      },
      "committer": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Sun Oct 16 23:28:52 2011 +0200"
      },
      "message": "PM / Hibernate: Freeze kernel threads after preallocating memory\n\nThere is a problem with the current ordering of hibernate code which\nleads to deadlocks in some filesystems\u0027 memory shrinkers.  Namely,\nsome filesystems use freezable kernel threads that are inactive when\nthe hibernate memory preallocation is carried out.  Those same\nfilesystems use memory shrinkers that may be triggered by the\nhibernate memory preallocation.  If those memory shrinkers wait for\nthe frozen kernel threads, the hibernate process deadlocks (this\nhappens with XFS, for one example).\n\nApparently, it is not technically viable to redesign the filesystems\nin question to avoid the situation described above, so the only\npossible solution of this issue is to defer the freezing of kernel\nthreads until the hibernate memory preallocation is done, which is\nimplemented by this change.\n\nUnfortunately, this requires the memory preallocation to be done\nbefore the \"prepare\" stage of device freeze, so after this change the\nonly way drivers can allocate additional memory for their freeze\nroutines in a clean way is to use PM notifiers.\n\nReported-by: Christoph \u003ccr2005@u-club.de\u003e\nSigned-off-by: Rafael J. Wysocki \u003crjw@sisk.pl\u003e\n"
    },
    {
      "commit": "8f88893c05f2f677f18f2ce5591b4bed5d4a7535",
      "tree": "4368e42a2c35ee018f7cd91b8fa6643f6ff2b852",
      "parents": [
        "37cce26b32142f09a8967f6d238178af654b20de"
      ],
      "author": {
        "name": "Alan Stern",
        "email": "stern@rowland.harvard.edu",
        "time": "Mon Sep 26 17:38:50 2011 +0200"
      },
      "committer": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Sun Oct 16 23:28:51 2011 +0200"
      },
      "message": "PM: Update the policy on default wakeup settings\n\nThis patch (as1485) documents a change to the kernel\u0027s default wakeup\npolicy.  Devices that forward wakeup requests between buses should be\nenabled for wakeup by default.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Rafael J. Wysocki \u003crjw@sisk.pl\u003e\n"
    },
    {
      "commit": "2a77c46de1e3dace73745015635ebbc648eca69c",
      "tree": "a801ed6ba5623c7d963377906776ade6f02eea0a",
      "parents": [
        "9bd717c0dc8224cadfd66df7eeff98c987711d98"
      ],
      "author": {
        "name": "ShuoX Liu",
        "email": "shuox.liu@intel.com",
        "time": "Wed Aug 10 23:01:26 2011 +0200"
      },
      "committer": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Sun Oct 16 23:27:45 2011 +0200"
      },
      "message": "PM / Suspend: Add statistics debugfs file for suspend to RAM\n\nRecord S3 failure time about each reason and the latest two failed\ndevices\u0027 names in S3 progress.\nWe can check it through \u0027suspend_stats\u0027 entry in debugfs.\n\nThe motivation of the patch:\n\nWe are enabling power features on Medfield. Comparing with PC/notebook,\na mobile enters/exits suspend-2-ram (we call it s3 on Medfield) far\nmore frequently. If it can\u0027t enter suspend-2-ram in time, the power\nmight be used up soon.\n\nWe often find sometimes, a device suspend fails. Then, system retries\ns3 over and over again. As display is off, testers and developers\ndon\u0027t know what happens.\n\nSome testers and developers complain they don\u0027t know if system\ntries suspend-2-ram, and what device fails to suspend. They need\nsuch info for a quick check. The patch adds suspend_stats under\ndebugfs for users to check suspend to RAM statistics quickly.\n\nIf not using this patch, we have other methods to get info about\nwhat device fails. One is to turn on  CONFIG_PM_DEBUG, but users\nwould get too much info and testers need recompile the system.\n\nIn addition, dynamic debug is another good tool to dump debug info.\nBut it still doesn\u0027t match our utilization scenario closely.\n1) user need write a user space parser to process the syslog output;\n2) Our testing scenario is we leave the mobile for at least hours.\n   Then, check its status. No serial console available during the\n   testing. One is because console would be suspended, and the other\n   is serial console connecting with spi or HSU devices would consume\n   power. These devices are powered off at suspend-2-ram.\n\nSigned-off-by: ShuoX Liu \u003cshuox.liu@intel.com\u003e\nSigned-off-by: Rafael J. Wysocki \u003crjw@sisk.pl\u003e\n"
    },
    {
      "commit": "9bd717c0dc8224cadfd66df7eeff98c987711d98",
      "tree": "bca8a9232d457d984d87da53b5ffadcb7dcd46be",
      "parents": [
        "7811ac276bb9f77aa6475110ef340c1bc3090def",
        "857b36c7b038ac56a882ee914df93e5985443074"
      ],
      "author": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Sun Oct 16 23:26:49 2011 +0200"
      },
      "committer": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Sun Oct 16 23:26:49 2011 +0200"
      },
      "message": "Merge branch \u0027pm-runtime\u0027 into pm-for-linus\n\n* pm-runtime:\n  PM / Runtime: Handle .runtime_suspend() failure correctly\n  PM / Runtime: Fix kerneldoc comment for rpm_suspend()\n  PM / Runtime: Update document about callbacks\n"
    },
    {
      "commit": "8d6f5cea12e5eebdaca94b3a3a4bd4f12e83d85d",
      "tree": "af5a22db9062a21f334fcaa005fa45806e72a23b",
      "parents": [
        "e5f93a36f72c9817b989f573f7140e3dfbce0f49"
      ],
      "author": {
        "name": "adam radford",
        "email": "aradford@gmail.com",
        "time": "Sat Oct 08 18:15:24 2011 -0700"
      },
      "committer": {
        "name": "James Bottomley",
        "email": "JBottomley@Parallels.com",
        "time": "Sun Oct 16 11:27:02 2011 -0500"
      },
      "message": "[SCSI] megaraid_sas: Changelog and version update\n\nThe following patch for megaraid_sas updates the\nChangeLog.megaraid_sas file and updates the driver version.\n\nSigned-off-by: Adam Radford \u003caradford@gmail.com\u003e\nSigned-off-by: James Bottomley \u003cJBottomley@Parallels.com\u003e\n"
    },
    {
      "commit": "aecc3130da7d3a02439bcba428e9fe470ec11f6f",
      "tree": "3913c2aa25438fbe5323686272f8fbae1d4bf198",
      "parents": [
        "938239560cee6d82f94160df2bf60bb422908ef8"
      ],
      "author": {
        "name": "Vikas Chaudhary",
        "email": "vikas.chaudhary@qlogic.com",
        "time": "Fri Oct 07 16:55:40 2011 -0700"
      },
      "committer": {
        "name": "James Bottomley",
        "email": "JBottomley@Parallels.com",
        "time": "Sun Oct 16 11:07:30 2011 -0500"
      },
      "message": "[SCSI] qla4xxx: Update license\n\nSigned-off-by: Vikas Chaudhary \u003cvikas.chaudhary@qlogic.com\u003e\nReviewed-by: Mike Christie \u003cmichaelc@cs.wisc.edu\u003e\nSigned-off-by: James Bottomley \u003cJBottomley@Parallels.com\u003e\n"
    },
    {
      "commit": "07aaae44f5a3962c3a410a6dd7936dfa7dece2b9",
      "tree": "0cdb5735800ddd63d8850aa26d3a3f1f3334267a",
      "parents": [
        "07a062140372187642003e02a49edc8a2115c1ca",
        "976d167615b64e14bc1491ca51d424e2ba9a5e84"
      ],
      "author": {
        "name": "Florian Tobias Schandinat",
        "email": "FlorianSchandinat@gmx.de",
        "time": "Sat Oct 15 00:14:01 2011 +0000"
      },
      "committer": {
        "name": "Florian Tobias Schandinat",
        "email": "FlorianSchandinat@gmx.de",
        "time": "Sat Oct 15 00:14:01 2011 +0000"
      },
      "message": "Merge commit \u0027v3.1-rc9\u0027 into fbdev-next\n"
    },
    {
      "commit": "2744e8afb3b76343e7eb8197e8b3e085036010a5",
      "tree": "2a96122ef4a6114483bda0fe9696d61a6e6f1bb5",
      "parents": [
        "a102a9ece5489e1718cd7543aa079082450ac3a2"
      ],
      "author": {
        "name": "Linus Walleij",
        "email": "linus.walleij@linaro.org",
        "time": "Mon May 02 20:50:54 2011 +0200"
      },
      "committer": {
        "name": "Linus Walleij",
        "email": "linus.walleij@stericsson.com",
        "time": "Thu Oct 13 12:49:17 2011 +0200"
      },
      "message": "drivers: create a pin control subsystem\n\nThis creates a subsystem for handling of pin control devices.\nThese are devices that control different aspects of package\npins.\n\nCurrently it handles pinmuxing, i.e. assigning electronic\nfunctions to groups of pins on primarily PGA and BGA type of\nchip packages which are common in embedded systems.\n\nThe plan is to also handle other I/O pin control aspects\nsuch as biasing, driving, input properties such as\nschmitt-triggering, load capacitance etc within this\nsubsystem, to remove a lot of ARM arch code as well as\nfeature-creepy GPIO drivers which are implementing the same\nthing over and over again.\n\nThis is being done to depopulate the arch/arm/* directory\nof such custom drivers and try to abstract the infrastructure\nthey all need. See the Documentation/pinctrl.txt file that is\npart of this patch for more details.\n\nChangeLog v1-\u003ev2:\n\n- Various minor fixes from Joe\u0027s and Stephens review comments\n- Added a pinmux_config() that can invoke custom configuration\n  with arbitrary data passed in or out to/from the pinmux driver\n\nChangeLog v2-\u003ev3:\n\n- Renamed subsystem folder to \"pinctrl\" since we will likely\n  want to keep other pin control such as biasing in this\n  subsystem too, so let us keep to something generic even though\n  we\u0027re mainly doing pinmux now.\n- As a consequence, register pins as an abstract entity separate\n  from the pinmux. The muxing functions will claim pins out of the\n  pin pool and make sure they do not collide. Pins can now be\n  named by the pinctrl core.\n- Converted the pin lookup from a static array into a radix tree,\n  I agreed with Grant Likely to try to avoid any static allocation\n  (which is crap for device tree stuff) so I just rewrote this\n  to be dynamic, just like irq number descriptors. The\n  platform-wide definition of number of pins goes away - this is\n  now just the sum total of the pins registered to the subsystem.\n- Make sure mappings with only a function name and no device\n  works properly.\n\nChangeLog v3-\u003ev4:\n\n- Define a number space per controller instead of globally,\n  Stephen and Grant requested the same thing so now maps need to\n  define target controller, and the radix tree of pin descriptors\n  is a property on each pin controller device.\n- Add a compulsory pinctrl device entry to the pinctrl mapping\n  table. This must match the pinctrl device, like \"pinctrl.0\"\n- Split the file core.c in two: core.c and pinmux.c where the\n  latter carry all pinmux stuff, the core is for generic pin\n  control, and use local headers to access functionality between\n  files. It is now possible to implement a \"blank\" pin controller\n  without pinmux capabilities. This split will make new additions\n  like pindrive.c, pinbias.c etc possible for combined drivers\n  and chunks of functionality which is a GoodThing(TM).\n- Rewrite the interaction with the GPIO subsystem - the pin\n  controller descriptor now handles this by defining an offset\n  into the GPIO numberspace for its handled pin range. This is\n  used to look up the apropriate pin controller for a GPIO pin.\n  Then that specific GPIO range is matched 1-1 for the target\n  controller instance.\n- Fixed a number of review comments from Joe Perches.\n- Broke out a header file pinctrl.h for the core pin handling\n  stuff that will be reused by other stuff than pinmux.\n- Fixed some erroneous EXPORT() stuff.\n- Remove mispatched U300 Kconfig and Makefile entries\n- Fixed a number of review comments from Stephen Warren, not all\n  of them - still WIP. But I think the new mapping that will\n  specify which function goes to which pin mux controller address\n  50% of your concerns (else beat me up).\n\nChangeLog v4-\u003ev5:\n\n- Defined a \"position\" for each function, so the pin controller now\n  tracks a function in a certain position, and the pinmux maps define\n  what position you want the function in. (Feedback from Stephen\n  Warren and Sascha Hauer).\n- Since we now need to request a combined function+position from\n  the machine mapping table that connect mux settings to drivers,\n  it was extended with a position field and a name field. The\n  name field is now used if you e.g. need to switch between two\n  mux map settings at runtime.\n- Switched from a class device to using struct bus_type for this\n  subsystem. Verified sysfs functionality: seems to work fine.\n  (Feedback from Arnd Bergmann and Greg Kroah-Hartman)\n- Define a per pincontroller list of GPIO ranges from the GPIO\n  pin space that can be handled by the pin controller. These can\n  be added one by one at runtime. (Feedback from Barry Song)\n- Expanded documentation of regulator_[get|enable|disable|put]\n  semantics.\n- Fixed a number of review comments from Barry Song. (Thanks!)\n\nChangeLog v5-\u003ev6:\n\n- Create an abstract pin group concept that can sort pins into\n  named and enumerated groups no matter what the use of these\n  groups may be, one possible usecase is a group of pins being\n  muxed in or so. The intention is however to also use these\n  groups for other pin control activities.\n- Make it compulsory for pinmux functions to associate with\n  at least one group, so the abstract pin group concept is used\n  to define the groups of pins affected by a pinmux function.\n  The pinmux driver interface has been altered so as to enforce\n  a function to list applicable groups per function.\n- Provide an optional .group entry in the pinmux machine map\n  so the map can select beteween different available groups\n  to be used with a certain function.\n- Consequent changes all over the place so that e.g. debugfs\n  present reasonable information about the world.\n- Drop the per-pin mux (*config) function in the pinmux_ops\n  struct - I was afraid that this would start to be used for\n  things totally unrelated to muxing, we can introduce that to\n  the generic struct pinctrl_ops if needed. I want to keep\n  muxing orthogonal to other pin control subjects and not mix\n  these things up.\n\nChangeLog v6-\u003ev7:\n\n- Make it possible to have several map entries matching the\n  same device, pin controller and function, but using\n  a different group, and alter the semantics so that\n  pinmux_get() will pick all matching map entries, and\n  store the associated groups in a list. The list will\n  then be iterated over at pinmux_enable()/pinmux_disable()\n  and corresponding driver functions called for each\n  defined group. Notice that you\u0027re only allowed to map\n  multiple *groups* to the same\n  { device, pin controller, function } triplet, attempts\n  to map the same device to multiple pin controllers will\n  for example fail. This is hopefully the crucial feature\n  requested by Stephen Warren.\n- Add a pinmux hogging field to the pinmux mapping entries,\n  and enable the pinmux core to hog pinmux map entries.\n  This currently only works for pinmuxes without assigned\n  devices as it looks now, but with device trees we can\n  look up the corresponding struct device * entries when\n  we register the pinmux driver, and have it hog each\n  pinmux map in turn, for a simple approach to\n  non-dynamic pin muxing. This addresses an issue from\n  Grant Likely that the machine should take care of as\n  much of the pinmux setup as possible, not the devices.\n  By supplying a list of hogs, it can now instruct the\n  core to take care of any static mappings.\n- Switch pinmux group retrieveal function to grab an\n  array of strings representing the groups rather than an\n  array of unsigned and rewrite accordingly.\n- Alter debugfs to show the grouplist handled by each\n  pinmux. Also add a list of hogs.\n- Dynamically allocate a struct pinmux at pinmux_get() and\n  free it at pinmux_put(), then add these to the global\n  list of pinmuxes active as we go along.\n- Go over the list of pinmux maps at pinmux_get() time\n  and repeatedly apply matches.\n- Retrieve applicable groups per function from the driver\n  as a string array rather than a unsigned array, then\n  lookup the enumerators.\n- Make the device to pinmux map a singleton - only allow the\n  mapping table to be registered once and even tag the\n  registration function with __init so it surely won\u0027t be\n  abused.\n- Create a separate debugfs file to view the pinmux map at\n  runtime.\n- Introduce a spin lock to the pin descriptor struct, lock it\n  when modifying pin status entries. Reported by Stijn Devriendt.\n- Fix up the documentation after review from Stephen Warren.\n- Let the GPIO ranges give names as const char * instead of some\n  fixed-length string.\n- add a function to unregister GPIO ranges to mirror the\n  registration function.\n- Privatized the struct pinctrl_device and removed it from the\n  \u003clinux/pinctrl/pinctrl.h\u003e API, the drivers do not need to know\n  the members of this struct. It is now in the local header\n  \"core.h\".\n- Rename the concept of \"anonymous\" mux maps to \"system\" muxes\n  and add convenience macros and documentation.\n\nChangeLog v7-\u003ev8:\n\n- Delete the leftover pinmux_config() function from the\n \u003clinux/pinctrl/pinmux.h\u003e header.\n- Fix a race condition found by Stijn Devriendt in pin_request()\n\nChangeLog v8-\u003ev9:\n\n- Drop the bus_type and the sysfs attributes and all, we\u0027re not on\n  the clear about how this should be used for e.g. userspace\n  interfaces so let us save this for the future.\n- Use the right name in MAINTAINERS, PIN CONTROL rather than\n  PINMUX\n- Don\u0027t kfree() the device state holder, let the .remove() callback\n  handle this.\n- Fix up numerous kerneldoc headers to have one line for the function\n  description and more verbose documentation below the parameters\n\nChangeLog v9-\u003ev10:\n- pinctrl: EXPORT_SYMBOL needs export.h, folded in a patch\n  from Steven Rothwell\n- fix pinctrl_register error handling, folded in a patch from\n  Axel Lin\n- Various fixes to documentation text so that it\u0027s consistent.\n- Removed pointless comment from drivers/Kconfig\n- Removed dependency on SYSFS since we removed the bus in\n  v9.\n- Renamed hopelessly abbreviated pctldev_* functions to the\n  more verbose pinctrl_dev_*\n- Drop mutex properly when looking up GPIO ranges\n- Return NULL instead of ERR_PTR() errors on registration of\n  pin controllers, using cast pointers is fragile. We can\n  live without the detailed error codes for sure.\n\nCc: Stijn Devriendt \u003chighguy@gmail.com\u003e\nCc: Joe Perches \u003cjoe@perches.com\u003e\nCc: Russell King \u003clinux@arm.linux.org.uk\u003e\nAcked-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nAcked-by: Stephen Warren \u003cswarren@nvidia.com\u003e\nTested-by: Barry Song \u003c21cnbao@gmail.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\n"
    },
    {
      "commit": "d9cd48f95c5ba9e5f1d5287ed74630607471031c",
      "tree": "ae3235da226994cd106b48742c5b5e0f67275133",
      "parents": [
        "daa5c408a57514aaeef49a798202d285ee355c3e"
      ],
      "author": {
        "name": "Helmut Schaa",
        "email": "helmut.schaa@googlemail.com",
        "time": "Fri Oct 07 11:53:41 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Oct 11 16:41:16 2011 -0400"
      },
      "message": "mac80211: Update injection documentation\n\nAdd documentation about NOACK tx flag usage.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "094daf7db7c47861009899ce23f9177d761e20b0",
      "tree": "a107065393720b80664157a035b206576e834793",
      "parents": [
        "3ed6f6958c0ac21958285d8648f14d34da4bbcb3",
        "5f68a2b0a890d086e40fc7b55f4a0c32c28bc0d2"
      ],
      "author": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Oct 11 15:35:42 2011 -0400"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Oct 11 15:35:42 2011 -0400"
      },
      "message": "Merge branch \u0027master\u0027 of git://git.infradead.org/users/linville/wireless-next into for-davem\n\nConflicts:\n\tDocumentation/feature-removal-schedule.txt\n"
    },
    {
      "commit": "2b666859ec323403ac9a3a441d16eab30945404b",
      "tree": "a2db4a7fc4cc386deda62584379713fa5a5d6bbb",
      "parents": [
        "65112dccf8a113737684366349d7f9ec373ddc47"
      ],
      "author": {
        "name": "Adrian Bunk",
        "email": "bunk@stusta.de",
        "time": "Thu Oct 06 00:40:47 2011 +0300"
      },
      "committer": {
        "name": "Ingo Molnar",
        "email": "mingo@elte.hu",
        "time": "Tue Oct 11 08:23:34 2011 +0200"
      },
      "message": "x86: Default to vsyscall\u003dnative for now\n\nThis UML breakage:\n\n  linux-2.6.30.1[3800] vsyscall fault (exploit attempt?) ip:ffffffffff600000 cs:33 sp:7fbfb9c498 ax:ffffffffff600000 si:0 di:606790\n  linux-2.6.30.1[3856] vsyscall fault (exploit attempt?) ip:ffffffffff600000 cs:33 sp:7fbfb13168 ax:ffffffffff600000 si:0 di:606790\n\nIs caused by commit 3ae36655 (\"x86-64: Rework vsyscall emulation and add\nvsyscall\u003d parameter\") - the vsyscall emulation code is not fully cooked\nyet as UML relies on some rather fragile SIGSEGV semantics.\n\nLinus suggested in https://lkml.org/lkml/2011/8/9/376 to default\nto vsyscall\u003dnative for now, this patch implements that.\n\nSigned-off-by: Adrian Bunk \u003cbunk@kernel.org\u003e\nAcked-by: Andrew Lutomirski \u003cluto@mit.edu\u003e\nCc: H. Peter Anvin \u003chpa@linux.intel.com\u003e\nLink: http://lkml.kernel.org/r/20111005214047.GE14406@localhost.pp.htv.fi\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n"
    },
    {
      "commit": "2fb242adcaab5defa2f208775ac4f181ac998fdd",
      "tree": "2ca3dc1f23849a8f1d44d730177a1ef3e436b087",
      "parents": [
        "2a5306cc5f383b0e7414c75e458111afd4a563a4"
      ],
      "author": {
        "name": "Ming Lei",
        "email": "ming.lei@canonical.com",
        "time": "Sun Oct 09 11:40:25 2011 +0800"
      },
      "committer": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Mon Oct 10 23:37:23 2011 +0200"
      },
      "message": "PM / Runtime: Update document about callbacks\n\nSupport for device power domains has been introduced in\ncommit 9659cc0678b954f187290c6e8b247a673c5d37e1 (PM: Make\nsystem-wide PM and runtime PM treat subsystems consistently),\nalso power domain callbacks will take precedence over subsystem ones\nfrom commit 4d27e9dcff00a6425d779b065ec8892e4f391661(PM: Make\npower domain callbacks take precedence over subsystem ones).\n\nSo update part of \"Device Runtime PM Callbacks\" in\nDocumentation/power/runtime_pm.txt.\n\nSigned-off-by: Ming Lei \u003cming.lei@canonical.com\u003e\nSigned-off-by: Rafael J. Wysocki \u003crjw@sisk.pl\u003e\n"
    },
    {
      "commit": "7811ac276bb9f77aa6475110ef340c1bc3090def",
      "tree": "5c8b9d6033b7a52f0cd67394c20e437001f577a7",
      "parents": [
        "9696cc90071e3660ec02a3728acdedb68afdce4c",
        "ce26c5bb9569d8b826f01b8620fc16d8da6821e9"
      ],
      "author": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Fri Oct 07 23:17:18 2011 +0200"
      },
      "committer": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Fri Oct 07 23:17:18 2011 +0200"
      },
      "message": "Merge branch \u0027pm-devfreq\u0027 into pm-for-linus\n\n* pm-devfreq:\n  PM / devfreq: Add basic governors\n  PM / devfreq: Add common sysfs interfaces\n  PM: Introduce devfreq: generic DVFS framework with device-specific OPPs\n  PM / OPP: Add OPP availability change notifier.\n"
    },
    {
      "commit": "9696cc90071e3660ec02a3728acdedb68afdce4c",
      "tree": "99783d31dd42262c29346c92760f7896c3d81cb6",
      "parents": [
        "c28b56b1d46b1bbb1be33c8f2632a88b0de1ef68",
        "e3cba3243eb853a052613c804dea033bc4c9cf2d"
      ],
      "author": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Fri Oct 07 23:17:07 2011 +0200"
      },
      "committer": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Fri Oct 07 23:17:07 2011 +0200"
      },
      "message": "Merge branch \u0027pm-qos\u0027 into pm-for-linus\n\n* pm-qos:\n  PM / QoS: Update Documentation for the pm_qos and dev_pm_qos frameworks\n  PM / QoS: Add function dev_pm_qos_read_value() (v3)\n  PM QoS: Add global notification mechanism for device constraints\n  PM QoS: Implement per-device PM QoS constraints\n  PM QoS: Generalize and export constraints management code\n  PM QoS: Reorganize data structs\n  PM QoS: Code reorganization\n  PM QoS: Minor clean-ups\n  PM QoS: Move and rename the implementation files\n"
    },
    {
      "commit": "d727b60659a1173eb4142a5fc521ce67c28b34e1",
      "tree": "793d0fc86ecf98331024db5c86bc271cc72aa2d2",
      "parents": [
        "3ee72ca99288f1de95ec9c570e43f531c8799f06",
        "2a5306cc5f383b0e7414c75e458111afd4a563a4"
      ],
      "author": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Fri Oct 07 23:16:55 2011 +0200"
      },
      "committer": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Fri Oct 07 23:16:55 2011 +0200"
      },
      "message": "Merge branch \u0027pm-runtime\u0027 into pm-for-linus\n\n* pm-runtime:\n  PM / Tracing: build rpm-traces.c only if CONFIG_PM_RUNTIME is set\n  PM / Runtime: Replace dev_dbg() with trace_rpm_*()\n  PM / Runtime: Introduce trace points for tracing rpm_* functions\n  PM / Runtime: Don\u0027t run callbacks under lock for power.irq_safe set\n  USB: Add wakeup info to debugging messages\n  PM / Runtime: pm_runtime_idle() can be called in atomic context\n  PM / Runtime: Add macro to test for runtime PM events\n  PM / Runtime: Add might_sleep() to runtime PM functions\n"
    },
    {
      "commit": "88c5100c28b02c4b2b2c6f6fafbbd76d90f698b9",
      "tree": "08c4399e0341f7eb0ccb24e15f2cab687275c2a4",
      "parents": [
        "8083f0fc969d9b5353061a7a6f963405057e26b1",
        "3ee72ca99288f1de95ec9c570e43f531c8799f06"
      ],
      "author": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Fri Oct 07 13:38:43 2011 -0400"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Fri Oct 07 13:38:43 2011 -0400"
      },
      "message": "Merge branch \u0027master\u0027 of github.com:davem330/net\n\nConflicts:\n\tnet/batman-adv/soft-interface.c\n"
    },
    {
      "commit": "186c6bbced722cfeff041d2a1264c95f5d042050",
      "tree": "6a7c2b3b49111ab9e3b3ab8f7fdd4ec51fb661f3",
      "parents": [
        "b64b73d7d0c480f75684519c6134e79d50c1b341"
      ],
      "author": {
        "name": "Benjamin Poirier",
        "email": "benjamin.poirier@gmail.com",
        "time": "Tue Oct 04 04:00:30 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Thu Oct 06 15:58:24 2011 -0400"
      },
      "message": "net: fix typos in Documentation/networking/scaling.txt\n\nThe second hunk fixes rps_sock_flow_table but has to re-wrap the paragraph.\n\nSigned-off-by: Benjamin Poirier \u003cbenjamin.poirier@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "9243a169acb9df9c63632fb7d5464359a107877a",
      "tree": "cbd72c3a55ed111e926e3bc1be43aac0da703964",
      "parents": [
        "908a3283728d92df36e0c7cd63304fd35e93a8a9",
        "976d167615b64e14bc1491ca51d424e2ba9a5e84"
      ],
      "author": {
        "name": "Ingo Molnar",
        "email": "mingo@elte.hu",
        "time": "Thu Oct 06 12:43:28 2011 +0200"
      },
      "committer": {
        "name": "Ingo Molnar",
        "email": "mingo@elte.hu",
        "time": "Thu Oct 06 12:43:35 2011 +0200"
      },
      "message": "Merge commit \u0027v3.1-rc9\u0027 into sched/core\n\nMerge reason: pick up latest fixes.\n\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n"
    },
    {
      "commit": "9514a56753a8d379db36bed424588e1842f2bfcc",
      "tree": "d13cdfcd9473f521c3b108770dba57e81e557a30",
      "parents": [
        "4cd7f7a31178ff8a15ad2bc1258b9b2bf2cf51a4",
        "6add6967a4a57e2156b96e62f28bcbe1901d16c1"
      ],
      "author": {
        "name": "Grant Likely",
        "email": "grant.likely@secretlab.ca",
        "time": "Wed Oct 05 10:52:27 2011 -0600"
      },
      "committer": {
        "name": "Grant Likely",
        "email": "grant.likely@secretlab.ca",
        "time": "Wed Oct 05 10:52:27 2011 -0600"
      },
      "message": "Merge branch \u0027for-grant\u0027 of git://git.jdl.com/software/linux-3.0 into devicetree/next\n"
    },
    {
      "commit": "6add6967a4a57e2156b96e62f28bcbe1901d16c1",
      "tree": "baea440c7e011afdfd856ac069e4885c96675bf4",
      "parents": [
        "f614c74f94f435adcbe52bf7682f1dcc805f0ab1"
      ],
      "author": {
        "name": "Rob Herring",
        "email": "rob.herring@calxeda.com",
        "time": "Fri Sep 23 09:56:53 2011 -0500"
      },
      "committer": {
        "name": "Rob Herring",
        "email": "rob.herring@calxeda.com",
        "time": "Wed Oct 05 07:39:56 2011 -0500"
      },
      "message": "devicetree: Add ARM pl022 spi controller binding doc\n\nAdd binding documentation for ARM\u0027s Primecell PL022 SPI controller.\n\nSigned-off-by: Rob Herring \u003crob.herring@calxeda.com\u003e\n"
    },
    {
      "commit": "f614c74f94f435adcbe52bf7682f1dcc805f0ab1",
      "tree": "c08b63e5bb0d0b269b29e2528f693047dd2909de",
      "parents": [
        "dc9372808412edbc653a675a526c2ee6c0c14a91"
      ],
      "author": {
        "name": "Rob Herring",
        "email": "rob.herring@calxeda.com",
        "time": "Fri Sep 23 09:55:54 2011 -0500"
      },
      "committer": {
        "name": "Rob Herring",
        "email": "rob.herring@calxeda.com",
        "time": "Wed Oct 05 07:39:56 2011 -0500"
      },
      "message": "devicetree: Add ARM pl061 gpio controller binding doc\n\nAdd binding documentation for ARM\u0027s Primecell PL061 GPIO controller.\n\nSigned-off-by: Rob Herring \u003crob.herring@calxeda.com\u003e\n"
    },
    {
      "commit": "09e7d9410764f96f83ebf4a435028ac5e6240af6",
      "tree": "d13102a4df693056017abd632376f026c5220618",
      "parents": [
        "77e82516a69ad7dd10ada425930ba35e933abcfb"
      ],
      "author": {
        "name": "Ping Cheng",
        "email": "pinglinux@gmail.com",
        "time": "Tue Oct 04 23:51:14 2011 -0700"
      },
      "committer": {
        "name": "Dmitry Torokhov",
        "email": "dmitry.torokhov@gmail.com",
        "time": "Wed Oct 05 00:26:21 2011 -0700"
      },
      "message": "Input: wacom - add LED support for Cintiq 21ux2\n\nCintiq 21ux2 has two sets of four LEDs on right and left side of\nthe tablet, respectively.\n\nReviewed-by: Eduard Hasenleithner \u003ceduard@hasenleithner.at\u003e\nTested-by: Eduard Hasenleithner \u003ceduard@hasenleithner.at\u003e\nSigned-off-by: Ping Cheng \u003cpingc@wacom.com\u003e\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n"
    },
    {
      "commit": "77e82516a69ad7dd10ada425930ba35e933abcfb",
      "tree": "61113d84614f9c7ae7ba508fda7193384efd49f2",
      "parents": [
        "f4fa9a6d80a61e5ae01e41262ff8b913deb92378"
      ],
      "author": {
        "name": "Ping Cheng",
        "email": "pinglinux@gmail.com",
        "time": "Tue Oct 04 23:50:42 2011 -0700"
      },
      "committer": {
        "name": "Dmitry Torokhov",
        "email": "dmitry.torokhov@gmail.com",
        "time": "Wed Oct 05 00:26:17 2011 -0700"
      },
      "message": "Input: wacom - don\u0027t expose LED inactive option\n\nThe LED also indicates the status of the tablet. Don\u0027t turn it off.\n\nReviewed-by: Eduard Hasenleithner \u003ceduard@hasenleithner.at\u003e\nTested-by: Eduard Hasenleithner \u003ceduard@hasenleithner.at\u003e\nSigned-off-by: Ping Cheng \u003cpingc@wacom.com\u003e\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n"
    },
    {
      "commit": "f4fa9a6d80a61e5ae01e41262ff8b913deb92378",
      "tree": "d6565bf20210ef1d3787b14ab5e148bce55dccb4",
      "parents": [
        "f01536e3d68bacaf827325b716c743c542d20b64"
      ],
      "author": {
        "name": "Ping Cheng",
        "email": "pinglinux@gmail.com",
        "time": "Tue Oct 04 23:49:42 2011 -0700"
      },
      "committer": {
        "name": "Dmitry Torokhov",
        "email": "dmitry.torokhov@gmail.com",
        "time": "Wed Oct 05 00:26:00 2011 -0700"
      },
      "message": "Input: wacom - lower the LED luminance\n\nThe LED luminance level is normally lower when no button is pressed.\n\nReviewed-by: Eduard Hasenleithner \u003ceduard@hasenleithner.at\u003e\nTested-by: Eduard Hasenleithner \u003ceduard@hasenleithner.at\u003e\nSigned-off-by: Ping Cheng \u003cpingc@wacom.com\u003e\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n"
    },
    {
      "commit": "e3cba3243eb853a052613c804dea033bc4c9cf2d",
      "tree": "304a89a9a6b8d5fbde2318d7fb19ecbc3d5c2093",
      "parents": [
        "1a9a91525d806f2b3bd8b57b963755a96fd36ce2"
      ],
      "author": {
        "name": "Jean Pihet",
        "email": "j-pihet@ti.com",
        "time": "Tue Oct 04 21:54:45 2011 +0200"
      },
      "committer": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Tue Oct 04 21:54:45 2011 +0200"
      },
      "message": "PM / QoS: Update Documentation for the pm_qos and dev_pm_qos frameworks\n\nUpdate the documentation for the recently updated pm_qos API, kernel\nand user space.  Add documentation for the per-device PM QoS\n(dev_pm_qos) framework API.\n\nSigned-off-by: Jean Pihet \u003cj-pihet@ti.com\u003e\nSigned-off-by: Rafael J. Wysocki \u003crjw@sisk.pl\u003e\n"
    },
    {
      "commit": "879631aa658be2c1307758223b6d15236f9f6335",
      "tree": "9ab6eafbe5cee1b6d57492e42ddef317a800c469",
      "parents": [
        "a4af9008bb69f49df3abf816d48e224aca810af4"
      ],
      "author": {
        "name": "Felipe Balbi",
        "email": "balbi@ti.com",
        "time": "Fri Sep 30 10:58:47 2011 +0300"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Tue Oct 04 10:25:54 2011 -0700"
      },
      "message": "usb: dwc3: gadget: implement streams support\n\nThe following patch adds support for streams\nto dwc3 driver.\n\nWhile at that, also fix one small issue on\nendpoint disable where we should clear all\nflags not only ENABLED.\n\nReviewied-by: Paul Zimmerman \u003cpaulz@synopsys.com\u003e\nSigned-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "22f92bacbeea24b20e447444c28e7cad9f1ac3f8",
      "tree": "5c3f2346804a186aa2d954f078fd2f4d44bcc26e",
      "parents": [
        "557ab425429a5123d37f412ce3e6d6137cb621f8",
        "0f86267b79bc6e357b8606077c7f70239045ea9c"
      ],
      "author": {
        "name": "Ingo Molnar",
        "email": "mingo@elte.hu",
        "time": "Tue Oct 04 11:08:16 2011 +0200"
      },
      "committer": {
        "name": "Ingo Molnar",
        "email": "mingo@elte.hu",
        "time": "Tue Oct 04 11:09:08 2011 +0200"
      },
      "message": "Merge branch \u0027linus\u0027 into sched/core\n\nMerge reason: pick up the latest fixes.\n\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n"
    },
    {
      "commit": "ce662bb205abdb2545252bce5a0ba11070c29305",
      "tree": "cfad9c907a7b8f48fc6024b034750e5d213b5800",
      "parents": [
        "eb335a40ca050328f30db28ae4ce63cb07466d22"
      ],
      "author": {
        "name": "Raymond Yau",
        "email": "superquad.vortex2@gmail.com",
        "time": "Tue Oct 04 09:46:44 2011 +0800"
      },
      "committer": {
        "name": "Takashi Iwai",
        "email": "tiwai@suse.de",
        "time": "Tue Oct 04 07:26:59 2011 +0200"
      },
      "message": "ALSA: hda - Add documentation for codec specific mixer controls of Analog codecs\n\n* Channel Mode\n  This is an enum control to change the surround-channel setup,\n  appears only when the surround channels are available.\n  It gives the number of channels to be used, \"2ch\", \"4ch\" abd \"6ch\".\n  According to the configuration, this also controls the\n  jack-retasking of multi-I/O jacks.\n\n* Independent HP\n  When this enum control is enabled, the headphone output is routed\n  from an individual stream (the third PCM such as hw:0,2) instead of\n  the primary stream.\n\nSigned-off-by: Raymond Yau \u003csuperquad.vortex2@gmail.com\u003e\nSigned-off-by: Takashi Iwai \u003ctiwai@suse.de\u003e\n"
    },
    {
      "commit": "3c607d27c818cf4a5d28f2c73b18a88f8fbdfa33",
      "tree": "562c4a404f830c53f3ea332579213feeda80e10e",
      "parents": [
        "28d8c1df03502918bcafed38a0ccdca090b3a38b"
      ],
      "author": {
        "name": "Don Fry",
        "email": "donald.h.fry@intel.com",
        "time": "Fri Sep 30 11:40:20 2011 -0700"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Oct 03 15:22:38 2011 -0400"
      },
      "message": "iwlagn: rename iwlagn module iwlwifi and alias to iwlagn.\n\nRename the iwlagn module as iwlwifi in preparation for future\nchanges.  Add an alias to iwlagn for backward compatibility.\n\nSigned-off-by: Don Fry \u003cdonald.h.fry@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "ce26c5bb9569d8b826f01b8620fc16d8da6821e9",
      "tree": "3960fee73ec26f939295c92a231a09abcb4c816e",
      "parents": [
        "9005b65099ee4f14b6be691c4574612fe947531a"
      ],
      "author": {
        "name": "MyungJoo Ham",
        "email": "myungjoo.ham@samsung.com",
        "time": "Sun Oct 02 00:19:34 2011 +0200"
      },
      "committer": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Sun Oct 02 00:19:34 2011 +0200"
      },
      "message": "PM / devfreq: Add basic governors\n\nFour cpufreq-like governors are provided as examples.\n\npowersave: use the lowest frequency possible. The user (device) should\nset the polling_ms as 0 because polling is useless for this governor.\n\nperformance: use the highest freqeuncy possible. The user (device)\nshould set the polling_ms as 0 because polling is useless for this\ngovernor.\n\nuserspace: use the user specified frequency stored at\ndevfreq.user_set_freq. With sysfs support in the following patch, a user\nmay set the value with the sysfs interface.\n\nsimple_ondemand: simplified version of cpufreq\u0027s ondemand governor.\n\nWhen a user updates OPP entries (enable/disable/add), OPP framework\nautomatically notifies devfreq to update operating frequency\naccordingly. Thus, devfreq users (device drivers) do not need to update\ndevfreq manually with OPP entry updates or set polling_ms for powersave\n, performance, userspace, or any other \"static\" governors.\n\nNote that these are given only as basic examples for governors and any\ndevices with devfreq may implement their own governors with the drivers\nand use them.\n\nSigned-off-by: MyungJoo Ham \u003cmyungjoo.ham@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nReviewed-by: Mike Turquette \u003cmturquette@ti.com\u003e\nAcked-by: Kevin Hilman \u003ckhilman@ti.com\u003e\nSigned-off-by: Rafael J. Wysocki \u003crjw@sisk.pl\u003e\n"
    },
    {
      "commit": "9005b65099ee4f14b6be691c4574612fe947531a",
      "tree": "5066aa8189dd6614d3418b56a9483db0f8a57aa2",
      "parents": [
        "a3c98b8b2ede1f4230f49f9af7135cd902e71e83"
      ],
      "author": {
        "name": "MyungJoo Ham",
        "email": "myungjoo.ham@samsung.com",
        "time": "Sun Oct 02 00:19:28 2011 +0200"
      },
      "committer": {
        "name": "Rafael J. Wysocki",
        "email": "rjw@sisk.pl",
        "time": "Sun Oct 02 00:19:28 2011 +0200"
      },
      "message": "PM / devfreq: Add common sysfs interfaces\n\nDevice specific sysfs interface /sys/devices/.../power/devfreq_*\n- governor\tR: name of governor\n- cur_freq\tR: current frequency\n- polling_interval\tR: polling interval in ms given with devfreq profile\n\t\t\tW: update polling interval.\n- central_polling\tR: 1 if polling is managed by devfreq framework\n\nSigned-off-by: MyungJoo Ham \u003cmyungjoo.ham@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nReviewed-by: Mike Turquette \u003cmturquette@ti.com\u003e\nAcked-by: Kevin Hilman \u003ckhilman@ti.com\u003e\nSigned-off-by: Rafael J. Wysocki \u003crjw@sisk.pl\u003e\n--\n Documentation/ABI/testing/sysfs-class-devfreq |   44 ++++++++++++++++\n drivers/devfreq/devfreq.c                     |   69 ++++++++++++++++++++++++++\n 2 files changed, 113 insertions(+)\n create mode 100644 Documentation/ABI/testing/sysfs-class-devfreq\n"
    },
    {
      "commit": "048b718029033af117870d3da47da12995be14a3",
      "tree": "b3d4bf5219cd6543c35cb79d1aa08ae98cf2a8af",
      "parents": [
        "47ea91b4052d9e94b9dca5d7a3d947fbebd07ba9",
        "afe24b122eb6edb5f1cb942570ac8d766105c7fc"
      ],
      "author": {
        "name": "Ingo Molnar",
        "email": "mingo@elte.hu",
        "time": "Sat Oct 01 14:21:36 2011 +0200"
      },
      "committer": {
        "name": "Ingo Molnar",
        "email": "mingo@elte.hu",
        "time": "Sat Oct 01 14:21:36 2011 +0200"
      },
      "message": "Merge branch \u0027rcu/next\u0027 of git://github.com/paulmckrcu/linux into core/rcu\n"
    },
    {
      "commit": "4b801bc969364a980c1366e48155d1a29d20661b",
      "tree": "990b0e2ba1a6387f1e4b1f9846bd0246c9c7dbe8",
      "parents": [
        "37fbd9080088f5f98ab81a6f2ad456857971a089"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes.berg@intel.com",
        "time": "Thu Sep 29 16:04:40 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Sep 30 15:57:24 2011 -0400"
      },
      "message": "mac80211: document client powersave\n\nWith the addition of uAPSD and driver buffering\nthe powersave handling has gotten quite complex.\nAdd a section to the documentation to explain it\nfor anyone wanting to implement it.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "605b91c8f619047ed6d88e24c531d4bdddad46f4",
      "tree": "7075054518f215a9cfbfba25b71c38f92cdab763",
      "parents": [
        "95de86cf5162f78bc5aea80d1a9e5a248196ffaf"
      ],
      "author": {
        "name": "Roy.Li",
        "email": "rongqing.li@windriver.com",
        "time": "Wed Sep 28 19:51:54 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Thu Sep 29 14:57:19 2011 -0400"
      },
      "message": "net: Documentation: Fix type of variables\n\nSigned-off-by: Roy.Li \u003crongqing.li@windriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    }
  ],
  "next": "d7bd2d68aa2ee2738a10c8ad9346b805e4ab2e1c"
}
