)]}' { "log": [ { "commit": "8808a793f052c0a67426a24b961402fa20e92814", "tree": "8ee7a898dee93e95545d4b6f39628e3c52a2e0a1", "parents": [ "b8fdaf5a05adbf80e5a943bb3f65b46b5fb9b488" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Fri May 23 13:04:25 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat May 24 09:56:08 2008 -0700" }, "message": "ibmaem: new driver for power/energy/temp meters in IBM System X hardware\n\nThis driver reads IBM Active Energy Manager energy/temperature/power\nsensors on IBM System X hardware.\n\n[akpm@linux-foundation.org: fix printk warnings]\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nCc: \"Mark M. Hoffman\" \u003cmhoffman@lightlink.com\u003e\nCc: Corey Minyard \u003cminyard@acm.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "b8fdaf5a05adbf80e5a943bb3f65b46b5fb9b488", "tree": "f98aba24793139006c2a85f9433ae216bc12cd28", "parents": [ "ca68d0ac16539a062ae26ca50da8b186fa3a0814" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Fri May 23 13:04:25 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat May 24 09:56:08 2008 -0700" }, "message": "i5k_amb: support Intel 5400 chipset\n\nMinor rework to support the Intel 5400 chipset.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nCc: \"Mark M. Hoffman\" \u003cmhoffman@lightlink.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "ca68d0ac16539a062ae26ca50da8b186fa3a0814", "tree": "d43c61c3a7bd6ec1158334b83b30ee91e9baedf5", "parents": [ "80bfc25f42db6d4715c7688ae2352c5a8038fe7e" ], "author": { "name": "Gabor Czigola", "email": "czigola@gmail.com", "time": "Fri May 23 13:04:23 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat May 24 09:56:08 2008 -0700" }, "message": "hdaps: invert the axes for HDAPS on Lenovo R61i ThinkPads\n\nCc: \"Mark M. Hoffman\" \u003cmhoffman@lightlink.com\u003e\nCc: Dmitry Torokhov \u003cdtor@mail.ru\u003e\nCc: Jiri Kosina \u003cjikos@jikos.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "c92758ceda477b1333fde35327cfa867dcc47bd1", "tree": "9bdb7e6a5a25b746f175c4ebfb9028ec91115bb6", "parents": [ "03fc922f4085a0139f313831fe2dc6fed467cd2d", "4f02f8220562591322c118d07a32bebf705318b7" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 01 08:28:26 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 01 08:28:26 2008 -0700" }, "message": "Merge branch \u0027release\u0027 of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6\n\n* \u0027release\u0027 of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:\n hwmon: (adt7473) minor cleanup / refactoring\n hwmon: (asb100) Remove some dead code\n hwmon: (lm75) Fix an incorrect comment\n hwmon: (w83793) VID and VRM handling cleanups\n hwmon: (w83l785ts) Don\u0027t ask the user to report failures\n hwmon: (smsc47b397) add a new chip id (0x8c)\n" }, { "commit": "4f02f8220562591322c118d07a32bebf705318b7", "tree": "f203c196d16065a51c68e6539e912ca7f9ca9f8f", "parents": [ "1852448652fd526d56099256dadc4ef32cb1b10e", "809307768cb177621b8f45f87fa840993ca4cb60" ], "author": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu May 01 07:33:17 2008 -0400" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu May 01 07:33:17 2008 -0400" }, "message": "Merge branch \u0027smsc47b397-new-id\u0027 into release\n" }, { "commit": "145980a0b07520f0f82cc40999acc92b349ea40c", "tree": "48bc21442adcda4561b8f5356380cc168d059619", "parents": [ "bdf4bbaaee3d4b8f555658333cbce1affe9070fb" ], "author": { "name": "Harvey Harrison", "email": "harvey.harrison@gmail.com", "time": "Wed Apr 30 00:54:57 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Apr 30 08:29:53 2008 -0700" }, "message": "drivers: replace remaining __FUNCTION__ occurrences\n\n__FUNCTION__ is gcc-specific, use __func__\n\nSigned-off-by: Harvey Harrison \u003charvey.harrison@gmail.com\u003e\nCc: Ben Dooks \u003cben-linux@fluff.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "3760f736716f74bdc62a4ba5406934338da93eb2", "tree": "e28e22c6655dd62566f1b7a99f9354a31bf9d06e", "parents": [ "d2653e92732bd3911feff6bee5e23dbf959381db" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Apr 29 23:11:40 2008 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue Apr 29 23:11:40 2008 +0200" }, "message": "i2c: Convert most new-style drivers to use module aliasing\n\nBased on earlier work by Jon Smirl and Jochen Friedrich.\n\nUpdate most new-style i2c drivers to use standard module aliasing\ninstead of the old driver_name/type driver matching scheme. I\u0027ve\nleft the video drivers apart (except for SoC camera drivers) as\nthey\u0027re a bit more diffcult to deal with, they\u0027ll have their own\npatch later.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Jon Smirl \u003cjonsmirl@gmail.com\u003e\nCc: Jochen Friedrich \u003cjochen@scram.de\u003e\n" }, { "commit": "d2653e92732bd3911feff6bee5e23dbf959381db", "tree": "fd3a413bc150855a09de29b2d253b7dbeb2705ff", "parents": [ "ee56d977423a58b53fd0fc1ef0aca0c9cb564c53" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Apr 29 23:11:39 2008 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue Apr 29 23:11:39 2008 +0200" }, "message": "i2c: Add support for device alias names\n\nBased on earlier work by Jon Smirl and Jochen Friedrich.\n\nThis patch allows new-style i2c chip drivers to have alias names using\nthe official kernel aliasing system and MODULE_DEVICE_TABLE(). At this\npoint, the old i2c driver binding scheme (driver_name/type) is still\nsupported.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Jochen Friedrich \u003cjochen@scram.de\u003e\nCc: Jon Smirl \u003cjonsmirl@gmail.com\u003e\nCc: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\n" }, { "commit": "1852448652fd526d56099256dadc4ef32cb1b10e", "tree": "1f3e51d0f3ce3f267df962a85275b993fbd9d7f0", "parents": [ "5d822e9bd9d866672984c6a6b613f0c11ca2543b" ], "author": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Mar 06 08:41:09 2008 -0500" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Apr 27 09:23:12 2008 -0400" }, "message": "hwmon: (adt7473) minor cleanup / refactoring\n\nAcked-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "5d822e9bd9d866672984c6a6b613f0c11ca2543b", "tree": "a52404f9a93479d4efa9a9801a7203d97568f9dc", "parents": [ "ccd6befceb9a9b02114a93ff4cfa29adbdf60b6d" ], "author": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Tue Feb 26 08:48:49 2008 -0500" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Apr 27 09:23:12 2008 -0400" }, "message": "hwmon: (asb100) Remove some dead code\n\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "ccd6befceb9a9b02114a93ff4cfa29adbdf60b6d", "tree": "f3cfe156da6c8bead8ffc81da87648916912eb18", "parents": [ "93c75a4ac2d95834e7202965d853d3cd23aadb40" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Feb 19 12:42:58 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Apr 27 09:23:12 2008 -0400" }, "message": "hwmon: (lm75) Fix an incorrect comment\n\nHigh-byte first is not opposite to the usual practice - that\u0027s what\nalmost all hardware monitoring drivers do. It is opposite to the SMBus\nstandard though.\n\nAlso delete a duplicate comment.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "93c75a4ac2d95834e7202965d853d3cd23aadb40", "tree": "6f80254db8035f627d1e4a998a748f70a9a8ab4f", "parents": [ "4040c415f5566ecfe95b509ee84d68fb7050b30c" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Feb 12 11:25:07 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Apr 27 09:23:12 2008 -0400" }, "message": "hwmon: (w83793) VID and VRM handling cleanups\n\n* Rework the device initialization function so as to read the\n\"Multi-Function Pin Control\" register (0x58) once instead of twice.\nI2C transactions aren\u0027t cheap so this speeds up the driver loading.\n\n* Only create the \"vrm\" attribute if at least one VID value is\navailable.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Gong Jun \u003cjgong@winbond.com\u003e\nAcked-by: Rudolf Marek \u003cr.marek@assembler.cz\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "4040c415f5566ecfe95b509ee84d68fb7050b30c", "tree": "ad3b8da7b1187af8c1d3b37254f1d2e7d22417f2", "parents": [ "4b119e21d0c66c22e8ca03df05d9de623d0eb50f" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Feb 12 11:17:26 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Apr 27 09:23:11 2008 -0400" }, "message": "hwmon: (w83l785ts) Don\u0027t ask the user to report failures\n\nThere\u0027s nothing we can do about read errors on the W83L785TS-S, so\ndon\u0027t ask the user to report them.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "2961cb22ef02850d90e7a12c28a14d74e327df8d", "tree": "bffcd9538506c0b031c082d2b0ebc8a1c608b7fc", "parents": [ "05dda977f2574c3341abef9b74c27d2b362e1e3a" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Mar 09 13:34:28 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Mar 27 08:40:41 2008 -0400" }, "message": "hwmon: (w83781d) Fix I/O resource conflict with PNP\n\nOnly request I/O ports 0x295-0x296 instead of the full I/O address\nrange. This solves a conflict with PNP resources on a few motherboards.\n\nAlso request the I/O ports in two parts (4 low ports, 4 high ports)\nduring device detection, otherwise the PNP resource makes the request\n(and thus the detection) fail.\n\nThis fixes lm-sensors ticket #2306:\nhttp://www.lm-sensors.org/ticket/2306\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "ffda6857c87fbe3ab144ff3f34b89421eed048cf", "tree": "840938d3a8777f3bf5f391ee918e3d8924e00ad3", "parents": [ "3d960a99ab1dcf6f395b883c5cca01c2dc150451" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Wed Mar 19 17:00:48 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Mar 19 18:53:36 2008 -0700" }, "message": "ibmpex: report temperatures in mC, not C\n\nibmpex\u0027s temperature sensors report incorrect units. Apply a conversion\nfactor so that tempertures report correctly. Until now, no systems seemed to\nreport temperatures this way, but evidently QS2x blades do.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nCc: \"Mark M. Hoffman\" \u003cmhoffman@lightlink.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "3d960a99ab1dcf6f395b883c5cca01c2dc150451", "tree": "add1b7b92a6c060d56d403266beef8ccbc11d3ed", "parents": [ "df9cb0339f2c213bea5480464fa669ed4add7445" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Wed Mar 19 17:00:48 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Mar 19 18:53:35 2008 -0700" }, "message": "ibmpex: update Kconfig to list more supported models\n\nEnhanced the list of supported machines.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nCc: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "df9cb0339f2c213bea5480464fa669ed4add7445", "tree": "08227f5d1e007aceba678e0660ae0a3bc3db770f", "parents": [ "87cb055bc10571522f953925c25bb1a0d1b17605" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Wed Mar 19 17:00:47 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Mar 19 18:53:35 2008 -0700" }, "message": "ibmpex: correct power use multipliers for QS2x blade\n\nThe QS2x blades ships with v2.54 of the firmware, which use the same\nmultiplier for all power meters.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nCc: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "809307768cb177621b8f45f87fa840993ca4cb60", "tree": "22d46f22005258624fa921d7074ca38c62fe9266", "parents": [ "49914084e797530d9baaf51df9eda77babc98fa8" ], "author": { "name": "Craig Kelley", "email": "namonai@gmail.com", "time": "Fri Feb 29 10:24:44 2008 -0700" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Mar 02 14:21:35 2008 -0500" }, "message": "hwmon: (smsc47b397) add a new chip id (0x8c)\n\nAdded a new ID (0x8c) for the smsc47b397 hardware monitor driver.\nThis ID is used by HP in, at least, their dc7700 line.\n\nSigned-off-by: Craig Kelley \u003cnamonai@gmail.com\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "25e9c86d5a6d82ea45eb680fc66bf73ac5e50dff", "tree": "ef93558823da87fa425256d9c420113641bfe119", "parents": [ "57df46d6d9ccd6ced95f169020f79ae637423087" ], "author": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Feb 17 22:28:03 2008 -0500" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Mon Feb 18 21:58:15 2008 -0500" }, "message": "hwmon: normal_i2c arrays should be const\n\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "57df46d6d9ccd6ced95f169020f79ae637423087", "tree": "7ca14cba0e78cc8f35094e7cc9a8cbd7a715af19", "parents": [ "ae770152c801f10a91e5e86597a39b5f9ccf2d0d" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Mon Feb 18 13:33:23 2008 -0800" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Mon Feb 18 21:51:29 2008 -0500" }, "message": "hwmon: New driver for Analog Devices ADT7473 sensor chip\n\nThis driver reports voltage, temperature and fan sensor readings\non an ADT7473 chip.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "ae770152c801f10a91e5e86597a39b5f9ccf2d0d", "tree": "484ed1ed28e4a2ec0be348fffda5d2258f6696b4", "parents": [ "118a88718886a6cb7fb2cf7fb77ef2eea30c73a1" ], "author": { "name": "Rudolf Marek", "email": "r.marek@assembler.cz", "time": "Fri Jan 18 00:50:04 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Feb 17 22:08:37 2008 -0500" }, "message": "hwmon: (coretemp) Add Penryn CPU to coretemp\n\nThis patch adds support for family 0x17, which has Penryn Core. It should also\ncover the 8 cores Xeons.\n\nCan someone test please? I think it should work.\n\nSigned-off-by: Rudolf Marek \u003cr.marek@assembler.cz\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "118a88718886a6cb7fb2cf7fb77ef2eea30c73a1", "tree": "0d72f79ac05067ebe988417122f21e46c89d3d2d", "parents": [ "cd19ba1391f93bc3741d298667c074d2d3fcc9fd" ], "author": { "name": "Rudolf Marek", "email": "r.marek@assembler.cz", "time": "Sun Feb 17 22:59:39 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Feb 17 21:57:28 2008 -0500" }, "message": "hwmon: (coretemp) Add TjMax detection for mobile CPUs\n\nFollowing patch will finally solve the detection of Intel Mobile CPUs which\nshare same CPUID with Desktop/Server CPUs. We need this information to test\nsome bit so we know if TjMax is 100C or 85C. Intel claims this works for mobiles\nonly, respect that and set for desktops the TjMax to 100C. Intel provided some\ntable on their wiki based on my chat with them at:\nhttp://softwarecommunity.intel.com/isn/Community/en-US/forums/30247249/ShowThread.aspx#30247249\n\nSigned-off-by: Rudolf Marek \u003cr.marek@assembler.cz\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "cd19ba1391f93bc3741d298667c074d2d3fcc9fd", "tree": "e7e244907edf224414b80bacd24ae3cfbd9a7b16", "parents": [ "5910a9b2b1ff6205b39e5e03fdfd0ddb2a78386a" ], "author": { "name": "Riki Oktarianto", "email": "rkoktarianto@gmail.com", "time": "Mon Feb 04 23:41:58 2008 -0800" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Feb 17 15:04:14 2008 -0500" }, "message": "hwmon: (applesmc) sensors set for MacBook2\n\nOn my mid-2007 MacBook2, reading Ts0P sensor always failed with this message:\napplesmc: wait status failed: 5 !\u003d 50.\n\nSo I assume that there\u0027s no such Ts0p sensor in this model (please confirm,\nanyone). If there\u0027s the case, then we need a new set of sensors defined for\nMacBook2.\n\nSigned-off-by: Riki Oktarianto \u003crkoktarianto@gmail.com\u003e\nCc: Nicolas Boichat \u003cnicolas@boichat.ch\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "5910a9b2b1ff6205b39e5e03fdfd0ddb2a78386a", "tree": "ca911b5e2b92d16369abfae3a606a653f89a340e", "parents": [ "ba7c1927aa69c4dfe1ecf646f03b306e49dc8e37" ], "author": { "name": "Tobias Klauser", "email": "tklauser@distanz.ch", "time": "Sun Feb 17 15:39:24 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Feb 17 12:11:50 2008 -0500" }, "message": "hwmon: (thmc50) Storage class should be before const qualifier\n\nThe C99 specification states in section 6.11.5:\n\nThe placement of a storage-class specifier other than at the\nbeginning of the declaration specifiers in a declaration is an\nobsolescent feature.\n\nSigned-off-by: Tobias Klauser \u003ctklauser@distanz.ch\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "ba7c1927aa69c4dfe1ecf646f03b306e49dc8e37", "tree": "4a5847a80a19336548a1dca0ce754d9c5afb9592", "parents": [ "6369a2887a1b35fde91573adc650528e3efea8e9" ], "author": { "name": "Sam Ravnborg", "email": "sam@ravnborg.org", "time": "Sun Feb 17 13:22:51 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Feb 17 11:26:55 2008 -0500" }, "message": "hwmon: (coretemp) fix section mismatch warning\n\nFix following warning:\nWARNING: vmlinux.o(.text+0xebfd04): Section mismatch in reference from the function coretemp_cpu_callback() to the function .cpuinit.text:coretemp_device_add()\n\ncoretemp_cpu_callback() are only used inside a\nHOTPLUG_CPU block so annotate it __cpuinit.\nThe notifier referencing the function are annotated\n__refdata to silence warning from the exit function.\nThe unregister function do not use the embedded pointer\nbut clears the variable so the annotation is OK.\n\nSigned-off-by: Sam Ravnborg \u003csam@ravnborg.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "6369a2887a1b35fde91573adc650528e3efea8e9", "tree": "c1e9d888a20c2070c549934ee02b7d02218ed468", "parents": [ "1d5f2c16c6125ae6da1435ac5a190ae08429902a" ], "author": { "name": "Rudolf Marek", "email": "r.marek@assembler.cz", "time": "Fri Jan 18 00:42:54 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Feb 17 10:21:39 2008 -0500" }, "message": "hwmon: (coretemp) Add maximum cooling temperature readout\n\nFollowing patch will add reporting of maximum temperature, at which all fans\nshould spin full speed. It may be non-physical temperature on Desktop/Server CPUs.\n\nSigned-off-by: Rudolf Marek \u003cr.marek@assembler.cz\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "1d5f2c16c6125ae6da1435ac5a190ae08429902a", "tree": "92945ab52c4e570e6f6d2b51b37ed62f90316dde", "parents": [ "af865765a9ee3e3510f0fe82a4f1308d2820b7f6" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Feb 10 19:01:15 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Feb 17 09:27:19 2008 -0500" }, "message": "hwmon: (adm1026) Properly terminate sysfs groups\n\nThe missing NULL at the end of two sysfs file groups causes a kernel\ncrash when calling sysfs_create_group().\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "af865765a9ee3e3510f0fe82a4f1308d2820b7f6", "tree": "01aafe9104dad77bccc931f5266b257e6689e165", "parents": [ "2d1374cad5a97d7c08a2c0e4282fb674b588b421" ], "author": { "name": "Roger Lucas", "email": "vt8231@hiddenengine.co.uk", "time": "Wed Feb 13 07:52:06 2008 -0500" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Feb 17 09:27:19 2008 -0500" }, "message": "hwmon: (vt8231) Update maintainer email address\n\nSigned-off-by: Roger Lucas \u003cvt8231@hiddenengine.co.uk\u003e\n\n(modified MAINTAINERS entry also - MMH)\n\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "2d1374cad5a97d7c08a2c0e4282fb674b588b421", "tree": "7eb6d165d29c9d14abb011602ea14e6e9a95beb3", "parents": [ "13ff05e9f87101407445f79c7402aca087ddbd02" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Jan 06 15:46:02 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Feb 17 09:27:18 2008 -0500" }, "message": "hwmon: (vt8231) Add individual alarm files\n\nThe new libsensors needs these individual alarm files.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCC: Roger Lucas \u003cvt8231@hiddenengine.co.uk\u003e\nAcked-by: Juerg Haefliger \u003cjuergh at gmail.com\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "13ff05e9f87101407445f79c7402aca087ddbd02", "tree": "56d4c26d8c41ee2ab0bd60f3407730232fc8ea01", "parents": [ "1f08af7ea95e0f4ec632664b9f21a687426df658" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Jan 06 15:42:04 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Feb 17 09:27:18 2008 -0500" }, "message": "hwmon: (via686a) Add individual alarm files\n\nThe new libsensors needs these individual alarm files.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Juerg Haefliger \u003cjuergh at gmail.com\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "1f08af7ea95e0f4ec632664b9f21a687426df658", "tree": "949d5dd6072e796bb61b3a0417f234a4b3ed229f", "parents": [ "71062ffcd5173b8291ee80e84711b619b34a64eb" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Jan 06 15:36:13 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Feb 17 09:27:18 2008 -0500" }, "message": "hwmon: (smsc47m1) Add individual alarm files\n\nThe new libsensors needs these individual alarm files.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Juerg Haefliger \u003cjuergh at gmail.com\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "71062ffcd5173b8291ee80e84711b619b34a64eb", "tree": "7b524925fc838a7fdfaa1f5ded619c0f755c3565", "parents": [ "6cb59e915d04f71c62a0ee8fab34de274aa3fe2a" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Jan 06 15:27:59 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Feb 17 09:27:18 2008 -0500" }, "message": "hwmon: (max1619) Add individual alarm and fault files\n\nThe new libsensors needs these individual alarm and fault files.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Juerg Haefliger \u003cjuergh at gmail.com\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "6cb59e915d04f71c62a0ee8fab34de274aa3fe2a", "tree": "d8410cdbd344e886a13a1bc1428c7da93ce0fadb", "parents": [ "101142c37be8e5af9b847860219217e6b958c739" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Jan 06 15:25:52 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Sun Feb 17 09:27:18 2008 -0500" }, "message": "hwmon: (lm92) Add individual alarm files\n\nThe new libsensors needs these individual alarm files.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Juerg Haefliger \u003cjuergh at gmail.com\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "e84542f5db655d1ce7b4890832f0e5d19aae965d", "tree": "ea5a3e9ca5e9cb0810c91277450413ee89619391", "parents": [ "f8181762a04a3ff7878d3ec5c013bce9c771d4f7" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Jan 05 15:40:38 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:45 2008 -0500" }, "message": "hwmon: (lm80) Add individual alarm files\n\nThe new libsensors needs these individual alarm files.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "f8181762a04a3ff7878d3ec5c013bce9c771d4f7", "tree": "dfb412ff564775da37265495e5a58c1a1674ec45", "parents": [ "6cc37ee536bb90c428c8a7cde91f33ffe1fd27bd" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Jan 05 15:37:05 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:45 2008 -0500" }, "message": "hwmon: (lm80) De-macro the sysfs callbacks\n\nUse standard dynamic sysfs callbacks instead of macro-generated\nfunctions. This makes the code more readable, and the binary smaller\n(by about 34%).\n\nAs a side note, another benefit of this type of cleanup is that they\nshrink the build time. For example, this cleanup saves about 29% of\nthe lm80 driver build time.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "6cc37ee536bb90c428c8a7cde91f33ffe1fd27bd", "tree": "04e127c56a8750a29a9ce61045082da338b865de", "parents": [ "1c1381076f8c6cf0a2c9918194e3fa6369cdf06a" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Jan 05 15:35:09 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:45 2008 -0500" }, "message": "hwmon: (lm80) Various cleanups\n\n* Drop trailing whitespace\n* Fold a long line\n* Rename new_client to client\n* Drop redundant initializations to 0\n* Drop bogus comment\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "1c1381076f8c6cf0a2c9918194e3fa6369cdf06a", "tree": "1b542417e95fe9ccc5911d997681d45fd4d6f1cb", "parents": [ "e3604c626cdcddf37bf5c9663ae75b79dad40000" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jan 03 23:04:55 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:45 2008 -0500" }, "message": "hwmon: (w83627hf) Refactor beep enable handling\n\nWe can handle the beep enable bit as any other beep mask bit for\nslightly smaller code.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "e3604c626cdcddf37bf5c9663ae75b79dad40000", "tree": "cf39ceb60e34a69d5ab40657288d7ccbeebc9887", "parents": [ "ef878b11ba245d14b7db7816217a825d6a894182" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jan 03 23:00:30 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:45 2008 -0500" }, "message": "hwmon: (w83627hf) Add individual alarm and beep files\n\nThe new libsensors needs these individual alarm and beep files. The\ncode was copied from the w83781d driver. I\u0027ve tested the alarm files\non a W83627THF. I couldn\u0027t test the beep files as the system in\nquestion doesn\u0027t have a speaker.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "ef878b11ba245d14b7db7816217a825d6a894182", "tree": "57a6101f5a9b7ef5a731d3adfb5454bc9b30c989", "parents": [ "cbe311f2a40b8430d8e01b97c11e9e95d888430b" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jan 03 22:54:13 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:45 2008 -0500" }, "message": "hwmon: (w83627hf) Enable VBAT monitoring\n\nIf VBAT monitoring is disabled, enable it. Bug reported on the\nlm-sensors trac system:\nhttp://lm-sensors.org/ticket/2282\nThis is the exact same patch that was applied to the w83627ehf driver\n6 months ago.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "cbe311f2a40b8430d8e01b97c11e9e95d888430b", "tree": "0a9d1acbe72c5b29fbe6d11b15b84be489a938f9", "parents": [ "636866b9f0a72583d2361a897668eb19ff37ded6" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jan 03 21:22:44 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:45 2008 -0500" }, "message": "hwmon: (w83627ehf) The W83627DHG has 8 VID pins\n\nWhile the W83627EHF/EHG has only 6 VID pins, the W83627DHG has 8 VID\npins, to support VRD 11.0. Add support for this.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "636866b9f0a72583d2361a897668eb19ff37ded6", "tree": "c28196de978facc844e072bb9c22f51b3221ef51", "parents": [ "fad33c5fdae73a75af2f8ecf69147011bd57e28c" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jan 03 23:24:24 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:44 2008 -0500" }, "message": "hwmon: (asb100) Add individual alarm files\n\nThe new libsensors needs these individual alarm files.\n\nI did not create alarm files for in5 and in6 as these alarms are documented\nas not working.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Hans de Goede \u003cj.w.r.degoede@hhs.nl\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "fad33c5fdae73a75af2f8ecf69147011bd57e28c", "tree": "29adf7adb4d1a3cb5ec0d3f91b9d556c7e58d803", "parents": [ "af221931519571028c98cf7c7030dd973a524011" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jan 03 23:21:07 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:44 2008 -0500" }, "message": "hwmon: (asb100) De-macro the sysfs callbacks\n\nUse standard dynamic sysfs callbacks instead of macro-generated\nwrappers. This makes the code more readable, and the binary smaller\n(by about 12%).\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Hans de Goede \u003cj.w.r.degoede@hhs.nl\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "af221931519571028c98cf7c7030dd973a524011", "tree": "ebb11bc630f2a5e32f04f982b675e8a162401ab2", "parents": [ "8f74efe81d122c071410fd74f42879ef81439fa4" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jan 03 23:15:49 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:44 2008 -0500" }, "message": "hwmon: (asb100) Various cleanups\n\n* Drop history, it\u0027s incomplete and doesn\u0027t belong there\n* Drop unused version number\n* Drop trailing spaces\n* Coding style fixes\n* Fold long lines\n* Rename new_client to client\n* Drop redundant initializations to 0\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Hans de Goede \u003cj.w.r.degoede@hhs.nl\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "8f74efe81d122c071410fd74f42879ef81439fa4", "tree": "3febd18d58fb42d248ea565d23daa468094797e7", "parents": [ "345a22245451c0fd2c44b2afb5dfb75628b487fa" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Dec 01 11:25:33 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:44 2008 -0500" }, "message": "hwmon: VRM is not written to registers\n\nWhat was true of reading the VRM value is also true of writing it: not\nbeing a register value, it doesn\u0027t need hardware access, so we don\u0027t\nneed a reference to the i2c client. This allows for a minor code\ncleanup. As gcc appears to be smart enough to simplify the generated\ncode by itself, this cleanup only affects the source code, the\ngenerated binaries are unchanged.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "345a22245451c0fd2c44b2afb5dfb75628b487fa", "tree": "79e0e2d9f6307c0359981cc990e6364d31918594", "parents": [ "ff8421f733c91a70d8edadf9ce2842fca66172fa" ], "author": { "name": "Juerg Haefliger", "email": "juergh@gmail.com", "time": "Sat Jan 26 08:54:24 2008 -0800" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:44 2008 -0500" }, "message": "hwmon: (dme1737) fix Super-IO device ID override\n\nThe dme1737 has a second place where the Super-IO device ID is\nchecked. This has been missed by Jean\u0027s initial patch that adds\nsupport for user-controlled Super-IO device ID override. This patch\nfixes this issue.\n\nSigned-off-by: Juerg Haefliger \u003cjuergh at gmail.com\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "ff8421f733c91a70d8edadf9ce2842fca66172fa", "tree": "28d94de65d92990a215029ad0257806afaa189df", "parents": [ "cb96b8ca11644ee1223e0fb3f1f629ead15203cb" ], "author": { "name": "Juerg Haefliger", "email": "juergh@gmail.com", "time": "Sun Jan 27 16:39:46 2008 -0800" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:44 2008 -0500" }, "message": "hwmon: (dme1737) fix divide-by-0\n\nThis patch fixes a possible divide-by-0 and a minor bug in the\nFAN_FROM_REG macro (in TPC mode).\n\nSigned-off-by: Juerg Haefliger \u003cjuergh at gmail.com\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "cb96b8ca11644ee1223e0fb3f1f629ead15203cb", "tree": "c42b9d3ccd4f05c902058e6481f0c846d67fde9f", "parents": [ "5812f9283e621370a2d65282b7bcc942bf2c3f1c" ], "author": { "name": "Sergey Vlasov", "email": "vsu@altlinux.ru", "time": "Tue Jan 15 21:57:44 2008 +0300" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:44 2008 -0500" }, "message": "hwmon: (abituguru3) Add AUX4 fan input for Abit IP35 Pro\n\nAbit IP35 Pro has 6 fan connectors (CPU, SYS and AUX1-4), but the\nentry for AUX4 was missing from the table.\n\nSigned-off-by: Sergey Vlasov \u003cvsu@altlinux.ru\u003e\nAcked-by: Hans de Goede \u003cj.w.r.degoede@hhs.nl\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "5812f9283e621370a2d65282b7bcc942bf2c3f1c", "tree": "ac5f50f1baa812b6457439a57d8c0801ccab3402", "parents": [ "360f9452def0be1d6e29cee07a0f0640cd1d7b22" ], "author": { "name": "Steve Hardy", "email": "steve@linuxrealtime.co.uk", "time": "Tue Jan 22 23:00:02 2008 +0000" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:44 2008 -0500" }, "message": "hwmon: Add support for Texas Instruments/Burr-Brown ADS7828\n\nSigned-off-by: Steve Hardy \u003csteve@linuxrealtime.co.uk\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "360f9452def0be1d6e29cee07a0f0640cd1d7b22", "tree": "d891df1462d313852a2a2e772dce4e0b83bcf811", "parents": [ "1f52af0f6940dd4ab96edb9bbc56012ecc6c67e0" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Jan 06 15:49:19 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:44 2008 -0500" }, "message": "hwmon: (adm9240) Add individual alarm files\n\nThe new libsensors needs these individual alarm files.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nTested-by: Grant Coady \u003cgcoady.lk@gmail.com\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "1f52af0f6940dd4ab96edb9bbc56012ecc6c67e0", "tree": "1299b828a31ff093e3c1c47caef417e69eb8a59f", "parents": [ "7b501b1f53605bec17454dd8bbdbbf3f57a7cf32" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jan 03 23:35:33 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:44 2008 -0500" }, "message": "hwmon: (lm77) Add individual alarm files\n\nThe new libsensors needs this. As the old library never had support for\nthe lm77 driver, I even dropped the legacy \"alarms\" file.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Hans de Goede \u003cj.w.r.degoede@hhs.nl\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "7b501b1f53605bec17454dd8bbdbbf3f57a7cf32", "tree": "3ad4ffe685ebf6a4eca96591012005cf4fa9ed26", "parents": [ "455f791ea3e33a274c098b4a8c2e35d4d1a6d518" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jan 03 19:44:09 2008 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:44 2008 -0500" }, "message": "hwmon: Discard useless I2C driver IDs\n\nMany I2C hwmon drivers define a driver ID but no other code references\nthese, meaning that they are useless. Discard them, along with a few\nIDs which are defined but never used at all.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "455f791ea3e33a274c098b4a8c2e35d4d1a6d518", "tree": "b715b700c6173cefd46473f8c9670a94415ea117", "parents": [ "4b4df95dccdd2c6a573c9dedefb747ed663c074d" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Dec 03 23:28:42 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:43 2008 -0500" }, "message": "hwmon: (lm85) Make the pwmN_enable files writable\n\nMake the pwmN_enable files writable. This makes it possible to use\nstandard fan speed control tools (pwmconfig, fancontrol) with the lm85\ndriver.\n\nI left the non-standard pwmN_auto_channels files in place, as they\ngive additional control for the automatic mode, and some users might\nbe used to them by now.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "4b4df95dccdd2c6a573c9dedefb747ed663c074d", "tree": "f0a35bc10459af78a33ff543650e3024bdd82b91", "parents": [ "050ab8789869eabb6b2e066aca0d13d86013c315" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Dec 03 23:23:21 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:43 2008 -0500" }, "message": "hwmon: (lm85) Return standard values in pwmN_enable\n\nThe values returned by the lm85 driver in pwmN_enable sysfs files do\nnot match the standard. Fix that.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "050ab8789869eabb6b2e066aca0d13d86013c315", "tree": "27b94b247fe647a348ddadb7634826bff6943cd1", "parents": [ "c801082d7d41928b2348507ecdc841d5ebad3490" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Dec 02 23:42:24 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:43 2008 -0500" }, "message": "hwmon: (adm1031) Add individual alarm and fault files\n\nThe new libsensors needs these.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "c801082d7d41928b2348507ecdc841d5ebad3490", "tree": "ea463da5f9f0c5d8489fc74fecfa4aec8a66836b", "parents": [ "6d6006b8db5ead05053ccfbc45ab7e5c600a81b1" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Dec 02 23:39:38 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:43 2008 -0500" }, "message": "hwmon: (adm1031) Get rid of macro-generated wrappers\n\nUse the standard dynamic sysfs callbacks instead of macro-generated\nwrappers. It makes the code more simple and the binary smaller (-8% on\nmy system.)\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "6d6006b8db5ead05053ccfbc45ab7e5c600a81b1", "tree": "11e944a45b0005300b62b5b6f474fc88dae798e1", "parents": [ "38a1f0e9aed014be66c474ecd9fe8513646de833" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Dec 02 23:33:57 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:43 2008 -0500" }, "message": "hwmon: (adm1031) Various cleanups\n\n* Rename new_client to client\n* Drop redundant initializations to 0\n* Drop trailing space\n* Other whitespace cleanups\n* Split/fold a few long lines\n* Constify static data\n* Optimizations in set_fan_div()\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "38a1f0e9aed014be66c474ecd9fe8513646de833", "tree": "d7a4a529cdd6eed323cce893e70c3861ab243b37", "parents": [ "d5b0b5d62823f08ab4988e1b179fd5a9bddced31" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Dec 02 23:32:42 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:43 2008 -0500" }, "message": "hwmon: (adm1031) Fix register overwrite in set_fan_div()\n\nDon\u0027t rely on the register cache when setting a new fan clock divider.\nFor one thing, the cache might not have been initialized at all if the\ndriver has just been loaded. For another, the cached values may be old\nand you never know what can happen in the driver\u0027s back.\n\nAlso invalidate the cache instead of trying to adjust the measured fan\nspeed: the whole point of changing the clock divider is to get a better\nreading.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "d5b0b5d62823f08ab4988e1b179fd5a9bddced31", "tree": "b31d804d906adfd0d43b0672892efeb857aa4aec", "parents": [ "293c09971631d22f8e91402f58955ccaada9dbde" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Dec 14 14:41:53 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:43 2008 -0500" }, "message": "hwmon: (it87) Delete pwmN_freq files on driver removal\n\nIn commit f8d0c19a93cea3a26a90f2462295e1e01a4cd250 I forgot to delete\nthe pwmN_freq files on driver removal, here\u0027s the fix.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Riku Voipio \u003criku.voipio@movial.fi\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "293c09971631d22f8e91402f58955ccaada9dbde", "tree": "c5cdf121b455df519cc18f4daeefdaf112df3c91", "parents": [ "05663368d2138c14fa1b9aa8eeca4ca9a33d7c77" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Nov 30 23:52:44 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:43 2008 -0500" }, "message": "hwmon: (w83781d) Misc cleanups\n\n* Drop unused defines\n* Drop unused driver ID\n* Remove trailing whitespace\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "05663368d2138c14fa1b9aa8eeca4ca9a33d7c77", "tree": "63d2ec28352f62273dafc812e90e870b8a331143", "parents": [ "5b34dbcd88251508d02e48ad9b0f9b8232a13ee0" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Nov 30 23:51:24 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:43 2008 -0500" }, "message": "hwmon: (w83781d) Drop W83627HF support\n\nThe W83627HF hardware monitoring features are supported by the\nw83627hf driver for several years now. Support by the w83781d has\nbeen advertised as deprecated 6 months ago, it\u0027s about time to see\nit go.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "5b34dbcd88251508d02e48ad9b0f9b8232a13ee0", "tree": "fdc0d9d1cfbf22240a73a13b08dae3ecf91cb33d", "parents": [ "f67fdabfb94b0bb96623a4b48d22be5329a06277" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Nov 29 23:47:54 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:43 2008 -0500" }, "message": "hwmon: (adm1026) Don\u0027t create files for missing inputs\n\nOn the ADM1026, pins 27 and 28 can be used for two different functions:\neither temp3, or in8+in9. We should only create the sysfs files for the\nfunction that is configured, otherwise it is confusing for the user.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "f67fdabfb94b0bb96623a4b48d22be5329a06277", "tree": "5947d33eaddce3ce50e21a300913d89dbc67cf1e", "parents": [ "cb01a2312f56c93d2740e827718966b92b7cbb91" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Dec 01 11:24:17 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:42 2008 -0500" }, "message": "hwmon: (adm1026) More cleanups (updated)\n\nVarious cleanups:\n* Drop an unused define.\n* Drop unused struct member \"type\".\n* Drop one useless instruction.\n* Drop redundant initializations to 0.\n* Rename new_client to client.\n* Drop a useless cast.\n* Minor code cleanup.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "cb01a2312f56c93d2740e827718966b92b7cbb91", "tree": "dfbc86f540a011171b8ee77781d6b32166abfbbb", "parents": [ "a9273cb8eea503f6b8e28bd5f613962ecba278c5" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Nov 29 23:46:42 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:42 2008 -0500" }, "message": "hwmon: (adm1026) Whitespace cleanups\n\nWhitespace cleanups only:\n* Trim trailing whitespace.\n* Use tabs for indentation and alignment.\n* Add missing space after commas.\n* Remove extra spaces.\n\nNo functional change, binary is identical before and after this patch.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "a9273cb8eea503f6b8e28bd5f613962ecba278c5", "tree": "3a8723a095c4e8d1a608e074a913d849d62d4626", "parents": [ "0124dd78e28eec6c030f8d02929e81f05e1ce4e6" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Nov 29 23:45:22 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:42 2008 -0500" }, "message": "hwmon: (adm1026) Add individual alarm files\n\nThe new libsensors needs these.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "0124dd78e28eec6c030f8d02929e81f05e1ce4e6", "tree": "f1b5ab7a50dd4d132bfe09dd6ea7a01752144105", "parents": [ "f1d8e33263abb6a3a2265ba59344c7eb002b2389" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Nov 25 16:16:41 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:42 2008 -0500" }, "message": "hwmon: (it87) Add individual alarm files\n\nThe new libsensors needs this.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "f1d8e33263abb6a3a2265ba59344c7eb002b2389", "tree": "76e2091b18ed54c80692bb750c234d959802336f", "parents": [ "fe03f28cf35bf8dd0d3cba5e0c00a22530b73bfb" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Nov 25 16:14:44 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:42 2008 -0500" }, "message": "hwmon: (it87) Discard a dead e-mail address\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "fe03f28cf35bf8dd0d3cba5e0c00a22530b73bfb", "tree": "f23fe5f248345fcc9abfed993b26d5a953a59e3d", "parents": [ "7845cd791d87b9d5e6171452143dbef15aba00dc" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Wed Dec 19 14:11:25 2007 -0800" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:42 2008 -0500" }, "message": "hwmon: (adt7470) Support per-sensor alarm files\n\nRemove the old alarms hack and replace it with per-sensor alarm files.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "7845cd791d87b9d5e6171452143dbef15aba00dc", "tree": "c07576a2f0200742daf19c098c9ed0c8bd1b8f69", "parents": [ "67b671bceb4a8340a30929e9642620d99ed5ad76" ], "author": { "name": "Hans de Goede", "email": "j.w.r.degoede@hhs.nl", "time": "Thu Dec 20 16:42:59 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:42 2008 -0500" }, "message": "hwmon: (fschmd) Read voltage scaling factors from BIOS DMI\n\nThis patch adds support to the fschmd driver for reading the voltage scaling\nfactors from BIOS DMI tables, as specified in the Siemens datasheet.\n\nSigned-off-by: Hans de Goede \u003cj.w.r.degoede@hhs.nl\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "67b671bceb4a8340a30929e9642620d99ed5ad76", "tree": "d302333633bdbd752151933366aaaabfdc60e719", "parents": [ "b20ff13a6ad64f07ce78c75e6a335c185270d73c" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Dec 06 23:13:42 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:42 2008 -0500" }, "message": "hwmon: Let the user override the detected Super-I/O device ID\n\nWhile it is possible to force SMBus-based hardware monitoring chip\ndrivers to drive a not officially supported device, we do not have this\npossibility for Super-I/O-based drivers. That\u0027s unfortunate because\nsometimes newer chips are fully compatible and just forcing the driver\nto load would work. Instead of that we have to tell the users to\nrecompile the kernel driver, which isn\u0027t an easy task for everyone.\n\nSo, I propose that we add a module parameter to all Super-I/O based\nhardware monitoring drivers, letting advanced users force the driver\nto load on their machine. The user has to provide the device ID of a\nsupposedly compatible device. This requires looking at the source code or\na datasheet, so I am confident that users can\u0027t randomly force a driver\nwithout knowing what they are doing. Thus this should be relatively safe.\n\nAs you can see from the code, the implementation is pretty simple and\nunintrusive.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Hans de Goede \u003cj.w.r.degoede@hhs.nl\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "b20ff13a6ad64f07ce78c75e6a335c185270d73c", "tree": "f7cac2f8c8a45d8f867a43b0738f787b057d170d", "parents": [ "ec1d86c457c0d1a530914290d0bbd3ecce022272" ], "author": { "name": "Joe Perches", "email": "joe@perches.com", "time": "Mon Nov 19 17:48:07 2007 -0800" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:42 2008 -0500" }, "message": "hwmon: (vt8231) Add missing \"space\"\n\nSigned-off-by: Joe Perches \u003cjoe@perches.com\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "e86a776093cffef993841ab7dbb4b1611ebf9686", "tree": "68566463e2d6e5c4f5ef3765199d0b18ebd331aa", "parents": [ "86d47f127d740b891da29daff5799d91b6bd2e17" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Nov 04 23:45:41 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:42 2008 -0500" }, "message": "hwmon: (gl520sm) Add individual alarm and beep files\n\nlibsensors 3.0 needs these.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "86d47f127d740b891da29daff5799d91b6bd2e17", "tree": "f9e8431c06d82fe866f592983b612eb33d9d4298", "parents": [ "8b4b0ab41bb0a5e72b6fceb9a7aff303c88960b4" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Nov 04 23:45:14 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:42 2008 -0500" }, "message": "hwmon: (gl520sm) De-macro the sysfs callbacks\n\nUse standard dynamic sysfs callbacks instead of macro-generated\nwrappers. This makes the code more readable, and the binary smaller\n(by about 11%).\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "8b4b0ab41bb0a5e72b6fceb9a7aff303c88960b4", "tree": "2d01ab14c447fe9b415e81a872854930ee1ac614", "parents": [ "f28dc2f78bbcbf07b8a084fcd89cf6b4256f0664" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Nov 04 23:44:52 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:41 2008 -0500" }, "message": "hwmon: (gl520sm) Put register addresses in arrays\n\nThis allows for some code refactoring, making the binary slightly\nsmaller. This is also required to use dynamic sysfs callbacks for\nvoltage and temperature files.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "f28dc2f78bbcbf07b8a084fcd89cf6b4256f0664", "tree": "ac051fe9264ff967cea12f96ac7dd58e52bca409", "parents": [ "e0ae87a49cf3e721313bf8942299f3f140c6963c" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Nov 04 23:44:23 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:41 2008 -0500" }, "message": "hwmon: (gl520sm) Various cleanups\n\n* Drop trailing spaces\n* Drop unused driver ID\n* Drop stray backslashes in macros\n* Rename new_client to client\n* Drop redundant initializations to 0\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "e0ae87a49cf3e721313bf8942299f3f140c6963c", "tree": "3c0bb9dbfed442835da5a8432fb179170432c9f9", "parents": [ "72240307e988627df46553846936aa89a0f6a283" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Nov 25 21:58:21 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:41 2008 -0500" }, "message": "hwmon: (lm90) Use generic i2c reads during detection\n\nAs indirectly reported by Olof Johansson, the lm90 driver uses a\ncustom i2c read function even during detection, at which point we\ndon\u0027t know yet what device we\u0027re talking with. It would make more\nsense to only use the generic i2c read function at this point, so\nthat we don\u0027t log irrelevant errors on misdetection.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "72240307e988627df46553846936aa89a0f6a283", "tree": "b4def278323a7f91376bc8a996e1b29f112e7fa1", "parents": [ "21df67b191fd612fa28aedd39ec1414d8effc454" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Oct 23 14:02:24 2007 +0200" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:41 2008 -0500" }, "message": "hwmon: (gl518sm) Fix the reported fan speed\n\nThe fan speeds reported by the gl518sm driver are twice as much as they\nshould. It\u0027s currently reporting the number of pulses per minute, not\nrotations per minute, while typical fans emit two pulses per rotation.\nThis explains why all reports with this driver had very high speed\nvalues (between 9000 to 12000 RPM). Odd that nobody ever actually\ncomplained about this bug.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "21df67b191fd612fa28aedd39ec1414d8effc454", "tree": "92a73a43ac9361cf30b7d71f228edaaefa666415", "parents": [ "da6848da293b88e5ac46f5ecc6ae41122d5f680b" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Oct 22 17:47:58 2007 +0200" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:41 2008 -0500" }, "message": "hwmon: (gl518sm) Report error on invalid fan div value\n\nIf the user attempts to write a fan clock divider not supported by\nthe chip, an error should be returned.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "da6848da293b88e5ac46f5ecc6ae41122d5f680b", "tree": "401d6b3bc8ece09443cf47457b226eee9b7ac114", "parents": [ "28292e79dcecac3688530a7f78d1930b78fac96b" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Oct 22 17:47:16 2007 +0200" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:41 2008 -0500" }, "message": "hwmon: (gl518sm) Add individual alarm and beep files\n\nThe new libsensors needs these.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "28292e79dcecac3688530a7f78d1930b78fac96b", "tree": "2a8d3ccd81946e14e5ee27af300ff6cc3d475985", "parents": [ "5314f5c1abf03a56c6607ddef96b7a5607bee2f8" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Oct 22 17:46:42 2007 +0200" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:41 2008 -0500" }, "message": "hwmon: (gl518sm) Refactor fan functions\n\nThis makes the code more readable and the binary smaller (by 5% or so).\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "5314f5c1abf03a56c6607ddef96b7a5607bee2f8", "tree": "2f9b19bed0f6a55bc34c6220b9366d79f6be23d9", "parents": [ "a5955ed27497385cc491ecbe40af45951e830881" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Oct 22 17:46:17 2007 +0200" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:41 2008 -0500" }, "message": "hwmon: (gl518sm) Don\u0027t create sysfs files for missing features\n\nThe early revisions of the GL518SM do not report voltage values for\nthe first 3 voltage channels. We should not create sysfs attributes\nfor these missing features.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "a5955ed27497385cc491ecbe40af45951e830881", "tree": "7538f45fcf8cd98a1b12172c858f4067a7968b24", "parents": [ "7dcf9a31ef50367e474e5e320e8ec5e0a8b9d2f0" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Oct 22 17:45:08 2007 +0200" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:41 2008 -0500" }, "message": "hwmon: (gl518sm) Various cleanups\n\n* Drop history, it doesn\u0027t belong there\n* Drop unused struct member\n* Drop bogus struct member comment\n* Drop unused driver ID\n* Rename new_client to client\n* Drop redundant initializations to 0\n* Drop useless cast\n* Drop trailing space\n* Fix comment\n* Drop duplicate comment\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "7dcf9a31ef50367e474e5e320e8ec5e0a8b9d2f0", "tree": "e8e3603560f73eb3fbcfc927711e016947d253b3", "parents": [ "4e9527998f8673b1e3bb6f9645b9700e7973581e" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Nov 24 17:45:09 2007 -0500" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:41 2008 -0500" }, "message": "hwmon: (fschmd) Discard non-ASCII characters\n\nSomehow non-ASCII characters managed to sneak into the fschmd driver.\nKick them out.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Hans de Goede \u003cj.w.r.degoede@hhs.nl\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "4e9527998f8673b1e3bb6f9645b9700e7973581e", "tree": "b7c53d4e2756890103f75ed35d12a1d7dde3a4be", "parents": [ "bb081300326335594c273107fcd4e5bdad765ae7" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Oct 10 21:14:11 2007 +0200" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:41 2008 -0500" }, "message": "hwmon: (adm1025) Various cleanups\n\n* Whitespace cleanups\n* Constify scaling constants\n* Fold long lines\n* Drop redundant initializations to 0\n* Rename new_client to just client\n* Use sysfs_create_group()\n* Drop a useless comment\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "bb081300326335594c273107fcd4e5bdad765ae7", "tree": "1b76e5abc0f3ba30f858a112bd1537ba45f393c0", "parents": [ "d8543e7f30fe9306c8d5a16086bf75f71ab79acf" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Oct 10 21:11:52 2007 +0200" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:41 2008 -0500" }, "message": "hwmon: (adm1025) Add individual alarm files\n\nThe future libsensors needs these individual alarm and fault files.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "d8543e7f30fe9306c8d5a16086bf75f71ab79acf", "tree": "a9fe72585338d37f03ee17675cb5f8f6fcc5623d", "parents": [ "c7fa373796ea685874ca9525eeb3d0d0951e511b" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Oct 10 21:11:01 2007 +0200" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:41 2008 -0500" }, "message": "hwmon: (adm1025) Use dynamic sysfs callbacks\n\nThis lets us get rid of macro-generated functions and shrinks the\ndriver size by about 30%.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "c7fa373796ea685874ca9525eeb3d0d0951e511b", "tree": "c0079be25686be32ee1d99193c41edb4e19ad37c", "parents": [ "85f03bccd6e0e2ac6ccf017d4bcd5d74bb87a671" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Oct 09 15:22:22 2007 +0200" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:40 2008 -0500" }, "message": "hwmon: (lm87) Add support for the Analog Devices ADM1024\n\nIt happens that the Analog Devices ADM1024 is fully compatible with\nthe National Semiconductor LM87, so support for the former can easily\nbe added to the lm87 driver.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "85f03bccd6e0e2ac6ccf017d4bcd5d74bb87a671", "tree": "2e71c1f5edbbb9e78237da39f208514656c873a1", "parents": [ "ce9c2f449b9e6b68d3a71ba146d64c44c8945d8d" ], "author": { "name": "Kevin Lo", "email": "kevlo@kevlo.org", "time": "Fri Nov 23 09:31:52 2007 +0800" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:40 2008 -0500" }, "message": "hwmon: Add support for Winbond W83L786NG/NR\n\nSigned-off-by: Kevin Lo \u003ckevlo@kevlo.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "ce9c2f449b9e6b68d3a71ba146d64c44c8945d8d", "tree": "bb22c3bdb79fdfaad4b6ab595f3f054019e14066", "parents": [ "5aebefb08682ebd67ea0b902950d00169e1451cb" ], "author": { "name": "Robert P. J. Day", "email": "rpjday@crashcourse.ca", "time": "Tue Nov 06 03:21:42 2007 -0500" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:40 2008 -0500" }, "message": "hwmon: (adt7470) Replace power-of-two test\n\nSince \u003clinux/log2.h\u003e already supplies a power-of-two test, there\u0027s no\npoint in having this source file redefine it again.\n\nSigned-off-by: Robert P. J. Day \u003crpjday@crashcourse.ca\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "5aebefb08682ebd67ea0b902950d00169e1451cb", "tree": "f708da371342a458f773aad2fa9b76dee67d64fb", "parents": [ "6722feada7f6213ba06d510ef853e57ddcd59dae" ], "author": { "name": "Nicolas Kaiser", "email": "nikai@nikai.net", "time": "Wed Nov 07 13:28:59 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:40 2008 -0500" }, "message": "hwmon: (w83793) remove duplicated defines\n\nRemove duplicated defines.\n\nSigned-off-by: Nicolas Kaiser \u003cnikai@nikai.net\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "6722feada7f6213ba06d510ef853e57ddcd59dae", "tree": "5b6f21f4b961795d3202b4ea88a7aadb80eabe1d", "parents": [ "7fce084a0b3e2bb8caef919f8f36065953655bb5" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Oct 07 12:25:46 2007 +0200" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:40 2008 -0500" }, "message": "hwmon: (lm78/w83781d) Probe fewer I2C addresses\n\nWe\u0027ve never seen any device supported by the lm78 or w83781d driver at\naddresses 0x20-0x27, so let\u0027s stop probing these addresses. Extra probes cost\ntime, and have potential for confusing or misdetecting other I2C devices.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "6c152beefbf90579d21afc4f7e075b1f801f9a75", "tree": "c5814496de9e29662d558deddb31e0a0c4549cd7", "parents": [ "cec035de8265b18252742ef359b12e9694641112" ], "author": { "name": "Richard Purdie", "email": "rpurdie@rpsys.net", "time": "Wed Oct 31 15:00:07 2007 +0100" }, "committer": { "name": "Richard Purdie", "email": "rpurdie@rpsys.net", "time": "Thu Feb 07 09:47:00 2008 +0000" }, "message": "leds: Standardise LED naming scheme\n\nAs discussed on LKML some notion of \u0027function\u0027 is needed in\nLED naming. This patch adds this to the documentation and\nstandardises existing LED drivers.\n\nSigned-off-by: Richard Purdie \u003crpurdie@rpsys.net\u003e\n" }, { "commit": "87b4b6634ac112ddfe7b92aae50eb4bf7b128d1a", "tree": "3e7e5e671a9f0e6c997d98188336405d356e5aa6", "parents": [ "d384e35a25445bb60457b7dab8cffe178c6b7ecb" ], "author": { "name": "Bjorn Helgaas", "email": "bjorn.helgaas@hp.com", "time": "Tue Jan 22 07:21:03 2008 -0500" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Tue Jan 22 07:21:38 2008 -0500" }, "message": "hwmon: (it87) request only Environment Controller ports\n\nThe IT8705F and related parts are Super I/O controllers that contain\nmany separate devices.\n\nSome BIOSes describe IT8705F I/O port usage under a motherboard device\n(PNP0C02) with overlapping regions, e.g., 0x290-0x29f and 0x290-0x294.\n\nThe it87 driver supports only the Environment Controller, which requires\nonly two ISA ports, but it used to request an eight-port range. If that\nrange exceeds a range reported by the BIOS, as 0x290-0x297 would, the\nrequest fails, and the it87 driver cannot claim the device.\n\nThis patch makes the it87 driver request only the two ports used for the\nEnvironment Controller device.\n\nSystems where this problem has been reported:\n Gigabyte GA-K8N Ultra 9\n Gigabyte M56S-S3\n Gigabyte GA-965G-DS3\n\nKernel bug reports:\n http://bugzilla.kernel.org/show_bug.cgi?id\u003d9514\n http://lkml.org/lkml/2007/12/4/466\n\nRelated change:\n http://git.kernel.org/?p\u003dlinux/kernel/git/torvalds/linux-2.6.git;a\u003dcommitdiff;h\u003da7839e960675b549f06209d18283d5cee2ce9261\n\n The patch above increases the number of PNP port resources we support.\n Prior to this patch, we ignored some port resources, which masked the\n it87 problem.\n\nSigned-off-by: Bjorn Helgaas \u003cbjorn.helgaas@hp.com\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "58e6e78119da2bdade9f6f588155f0320072b76b", "tree": "b7e45de93ee9f4e559a8e3a8cb7d06db0e99ba5c", "parents": [ "ea67db4cdbbf7f4e74150e71da0984e25121f500" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jan 03 07:33:31 2008 -0500" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Jan 03 07:33:31 2008 -0500" }, "message": "hwmon: (w83627ehf) Be more careful when changing VID input level\n\nThe VID input level change has been reported to cause trouble. Be more\ncareful in this respect:\n* Only change the level on the W83627EHF/EHG. The W83627DHG is more\n complex in this respect.\n* Don\u0027t change the level if the VID pins are in output mode.\n* Only set the level to TTL if VRM 9.x is used.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "561d9a969455cb009bb15b63e1d925dc527e7a9d", "tree": "c5465a27338ef4ca6cf0b554e86d0f2a880815d7", "parents": [ "09b56adc98e0f8a21644fcb4d20ad367c3fceb55" ], "author": { "name": "Rafael J. Wysocki", "email": "rjw@sisk.pl", "time": "Mon Dec 03 18:01:50 2007 +0100" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Tue Dec 04 01:35:32 2007 -0500" }, "message": "HWMON: coretemp, suspend fix\n\nIt\u0027s not permitted to unregister a device after devices have been suspended.\nIt causes deadlocks to appear on systems with coretemp hwmon loaded.  To avoid\nthis, we can make coretemp_cpu_callback() do nothing if the _FROZEN bit is set\nin action.\n \nAlso, in other cases it\u0027s generally too late to unregister the coretemp device\nif the CPU is already dead, so it should be unregistered on CPU_DOWN_PREPARE.\n \nSigned-off-by: Rafael J. Wysocki \u003crjw@sisk.pl\u003e\nAcked-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\nCc: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "59a030a9b7a1bab5bdae57d469583e611759e90b", "tree": "31e1e0dfbf820b8d4eb33f3a38a875ea763777cd", "parents": [ "7768aa76966f06c4add6ac2b0ef397ff34f3dab0" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Fri Oct 26 11:55:11 2007 -0700" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Nov 08 08:42:47 2007 -0500" }, "message": "hwmon: (i5k_amb) Convert macros to C functions\n\nakpm objected to some of the macros, so convert them into functions.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "7768aa76966f06c4add6ac2b0ef397ff34f3dab0", "tree": "b1b97cf56996fd848446add7930181eb743a1571", "parents": [ "dcbd9f68aea41d22d5bd37468409da33151b4202" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Oct 25 13:11:01 2007 +0200" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Nov 08 08:42:47 2007 -0500" }, "message": "hwmon: (w83781d) Add missing curly braces\n\nMissing curly braces cause an if statement to be evaluated when it\nshouldn\u0027t. It happens to be harmless, but that\u0027s still worth fixing.\nThanks to Riku Voipio for reporting.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-By: Riku Voipio \u003criku.voipio@movial.fi\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "dcbd9f68aea41d22d5bd37468409da33151b4202", "tree": "ed0b18bd733a082043c85cfd2b35b44e8dfb42e6", "parents": [ "76e83bef15a11413e9f3da986c6e869a8192675e" ], "author": { "name": "Hans de Goede", "email": "j.w.r.degoede@hhs.nl", "time": "Wed Oct 24 14:33:18 2007 +0200" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Nov 08 08:42:47 2007 -0500" }, "message": "hwmon: (abituguru3) Identify ABit IP35 Pro as such\n\nThis patch changes the identification string for motherboards with an id of\n0x001A from unknown to \"Abit IP35 Pro\". Thanks to James Scott who has an Abit\nIP35 Pro.\n\nSigned-off-by: Hans de Goede \u003cj.w.r.degoede@hhs.nl\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "76e83bef15a11413e9f3da986c6e869a8192675e", "tree": "48417c4dd1a70b9338ab35d6aea1ee9a4e1e7f36", "parents": [ "9aa69338924266ca0b1aceb0ab943e8842449b0a" ], "author": { "name": "Riku Voipio", "email": "riku.voipio@iki.fi", "time": "Fri Oct 26 14:14:23 2007 +0300" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Nov 08 08:42:47 2007 -0500" }, "message": "hwmon: (f75375s) pwmX_mode sysfs files writable for f75375 variant\n\nFix value check in set_pwm_mode(). Instead of checking for chip variant there,\nmake pwmX_mode sysfs nodes only writable on f75375 variant.\n\nSigned-off-by: Riku Voipio \u003criku.voipio@movial.fi\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "ff312d07c2e1b1482fcc139b8af67ca39e9e98f0", "tree": "21297694fea8776dd7713b2ea7b0cc9985ac40f4", "parents": [ "620c142db20477149bf04c7e8e8fde70d608e8c7" ], "author": { "name": "Riku Voipio", "email": "riku.voipio@iki.fi", "time": "Wed Sep 26 13:14:40 2007 +0300" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Nov 08 08:42:46 2007 -0500" }, "message": "hwmon: (f75375s) Allow setting up fans with platform_data\n\nAllow initializing fans on systems where BIOS does not do that by\ndefault.\n\n - define f75375s_platform_data in new file f75375s.h\n - if platform_data was provided, set fans accordingly in f75375_init()\n - split set_pwm_enable() to a sysfs callback and directly usable\n set_pwm_enable_direct()\n\nSigned-off-by: Riku Voipio \u003criku.voipio@movial.fi\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "620c142db20477149bf04c7e8e8fde70d608e8c7", "tree": "83a9a490e854d1604205d567f3f1375ce210e5d7", "parents": [ "4bfe66048e97d29ab229519e9a821dbd4d929bd9" ], "author": { "name": "Riku Voipio", "email": "riku.voipio@movial.fi", "time": "Tue Oct 16 12:46:49 2007 +0300" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Nov 08 08:42:46 2007 -0500" }, "message": "hwmon: (f75375s) Add new style bindings\n\nFollowing the example of David Brownell\u0027s work on lm75:\n\n - Create a second driver struct, using new-style driver binding methods.\n\n - Rename the old driver struct as f75375_legacy_driver.\n\n - Make the legacy bind/unbind logic delegate all its work.\n\nSigned-off-by: Riku Voipio \u003criku.voipio@movial.fi\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" } ], "next": "4bfe66048e97d29ab229519e9a821dbd4d929bd9" }