)]}' { "log": [ { "commit": "0321708748d8f2ecfffa4a9feafb332312e4e57f", "tree": "303f04a76b6577adeea6c27ca83c3841b35a2ac0", "parents": [ "99e4d43ad5ff5778f92ee3bc40a29ac7cd8a28f4" ], "author": { "name": "Nishant Sarmukadam", "email": "nishants@marvell.com", "time": "Tue Apr 05 14:18:09 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:49:40 2011 -0400" }, "message": "mwl8k: Do not configure tx power unconditionally\n\nInstead of configuring tx power unconditionally, check for\nIEEE80211_CONF_CHANGE_POWER and configure it only when stack\nsets this flag\n\nSigned-off-by: Nishant Sarmukadam \u003cnishants@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "99e4d43ad5ff5778f92ee3bc40a29ac7cd8a28f4", "tree": "35f19c1d608a4abff349f68529f8e8ce817837cc", "parents": [ "4f5ef75b155955bf92adc772c6660787151fc78c" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanoharan@atheros.com", "time": "Mon Apr 04 22:56:19 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:49:40 2011 -0400" }, "message": "ath9k: configure beacons based on hw opmode\n\nCurrent ath9k code does not handle beacon timers on opmode\nspecific. One such example is that a STA beacon config overwrites\nalready configured AP vif\u0027s beacon timers during scan.\n\nOn multi station vif case, configure beacon timers beased\non primary vif selected. This also helps while moving back\nto single STA vif from multi STA vifs, where the power save\nis enabled and hw has to be reconfigured with proper\nbeacon and bssid/aid. Otherwise connection poll will be triggered\nso frequently due to beacon loss.\n\nSigned-off-by: Rajkumar Manoharan \u003crmanoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4f5ef75b155955bf92adc772c6660787151fc78c", "tree": "8b274c152875ac445b1de352709f9bc371253b48", "parents": [ "66da424177db4f4f2fa7a462db5912655aad966f" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanoharan@atheros.com", "time": "Mon Apr 04 22:56:18 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:15 2011 -0400" }, "message": "ath9k: Handle BSSID/AID for multiple interfaces\n\nAs of now bssid/aid is overridden with recently changed vif\u0027s\nbss config. This may cause improper beacon updation due to\nbssid/aid mismatch. On station mode, select an associated\nsta vif as primary vif and configure that vif\u0027s bss into hw.\nUpdate the primary vif on interface change and bss info change.\n\nSigned-off-by: Rajkumar Manoharan \u003crmanoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "66da424177db4f4f2fa7a462db5912655aad966f", "tree": "4c262cf18edb01935050bea48827230a637d7814", "parents": [ "59575d1c717815d62f1b5aeac74e5e60a1b27428" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanoharan@atheros.com", "time": "Mon Apr 04 22:56:17 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:15 2011 -0400" }, "message": "ath9k: Cleanup ath_vif struct\n\nRemove unused bssid from ath_vif and set av_bslot on beacon\nalloc/return.\n\nSigned-off-by: Rajkumar Manoharan \u003crmanoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "59575d1c717815d62f1b5aeac74e5e60a1b27428", "tree": "e2a0a7e3237f74f639807bc61e57155913ddb989", "parents": [ "1e5f52de216a32986a5c3cbc358dbb2620a03047" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanoharan@atheros.com", "time": "Mon Apr 04 22:56:16 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:15 2011 -0400" }, "message": "ath9k: deny new interface addtion on IBSS mode\n\nThe present check denies the IBSS interface addtion if we\nalready have any other vifs. But it fails to deny interface\naddition if IBSS was already present.\n\nSigned-off-by: Rajkumar Manoharan \u003crmanoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1e5f52de216a32986a5c3cbc358dbb2620a03047", "tree": "e5294e3a2f61bd49994ea730d9d63cb2aa128a84", "parents": [ "a0bbb58bcb70295ff05f870c93d34f9fbe614204" ], "author": { "name": "Jarkko Nikula", "email": "jhnikula@gmail.com", "time": "Mon Apr 04 11:04:58 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:14 2011 -0400" }, "message": "wl1251: Add support for idle mode\n\nOn Nokia N900 the wl1251 consumes the most power when the interface is up\nbut not associated to access point (that supports PSM). In terms of battery\ncurrent consumption, the consumption is ~180 mA higher when the interface is\nup but not associated and only ~5 mA higher when associated compared to\ninterface down and driver not loaded cases.\n\nThis patch adds support for the mac80211 idle notifications. Chip is put into\nidle very much the same way when entering into PSM by utilizing the Extreme\nLow Power (ELP) mode. I.e. idle is entered by setting necessary conditions\nin wl1251_ps_set_mode followed by a call to wl1251_ps_elp_sleep.\n\nIt seems it is just enough the authorize ELP mode followed by\nCMD_DISCONNECT (thanks to Kalle Valo about the idea to use it).\nWithout disconnect command the chip remains somewhat active and stays\nconsuming ~20 mA. Idle mode is left by same way than PSM. The wl1251_join\ncall is used to revert the CMD_DISCONNECT. Without it association to AP\ndoesn\u0027t work when trying second time.\n\nWith this patch the interface up but not associated case the battery current\nconsumption is less than 1 mA higher compared to interface down case.\n\nSigned-off-by: Jarkko Nikula \u003cjhnikula@gmail.com\u003e\nAcked-by: Kalle Valo \u003ckvalo@adurom.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a0bbb58bcb70295ff05f870c93d34f9fbe614204", "tree": "63eaefe05ef883aef37a4b6ecd121ae0ec9f0471", "parents": [ "ffbd308dce898a857de76d17cc05748505cf4ece" ], "author": { "name": "Jarkko Nikula", "email": "jhnikula@gmail.com", "time": "Mon Apr 04 11:04:57 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:14 2011 -0400" }, "message": "wl1251: Prepare for idle mode support\n\nRFC for WL1251 idle mode support brought a few issues that are worth to\nupdate before adding the idle mode support.\n\nSince the idle mode can reuse the code that is now used in Power Save Mode\n(PSM), the flag psm in struct wl1251 is changed to variable station_mode\nto be able to distinguish between PSM and idle modes.\n\nAs the station mode is different than the power power save mode command\nthat is sent to chip, the enum wl1251_cmd_ps_mod values are used only when\ncommunicating with the chip and new enum wl1251_station_mode values are used\ninside the driver.\n\nConfusing comment about psm and elp relation is removed since the PSM is\nactually activated by putting the chip into Entreme Low Power (ELP) mode.\n\nSigned-off-by: Jarkko Nikula \u003cjhnikula@gmail.com\u003e\nAcked-by: Kalle Valo \u003ckvalo@adurom.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fbd5d17b8e2b418b495599c554f9c4754b7f93c9", "tree": "9338404d673b004c0bb22cc76e3721995ea5db34", "parents": [ "26cd322bacd3d65fffef6f8418c2fdad5b42e4b5" ], "author": { "name": "Jussi Kivilinna", "email": "jussi.kivilinna@mbnet.fi", "time": "Sat Apr 02 11:25:54 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:13 2011 -0400" }, "message": "zd1211rw: rename CR* macros to ZD_CR*\n\nWith compat-wireless CR* macros in zd_usb.h conflict with CR macros in\ninclude/asm-generic/termbits.h. So rename CR* macros to ZD_CR*.\n\nConversion was done with using sed and then \u0027over 80 character line\u0027\ncheckpatch.pl warnings and comment indents were fixed.\n\nReported-by: Walter Goldens \u003cgoldenstranger@yahoo.com\u003e\nSigned-off-by: Jussi Kivilinna \u003cjussi.kivilinna@mbnet.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "26cd322bacd3d65fffef6f8418c2fdad5b42e4b5", "tree": "b1bda8c764912d6be3ff22ba681459d725154c65", "parents": [ "5e65968a10bb628b87024161c9adc8dbd886b47a" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sat Apr 02 03:39:48 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:13 2011 -0400" }, "message": "ath9k: use the hw opmode to select the beacon timer mode\n\nSince the beacon timers are global, the individual vif type should not\nbe used to determine the beacon timer configuration mode, use the\nglobal opmode instead.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5e65968a10bb628b87024161c9adc8dbd886b47a", "tree": "0baced7baf4848a5477cd08e28a0b4c20250a8f0", "parents": [ "2be50b8df53f2f329b7ddcc8be286ef6a7469fd2" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sat Apr 02 03:39:47 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:13 2011 -0400" }, "message": "ath9k: fix beacon slot processing in ad-hoc mode\n\nThe recent cleanups in the beacon code fixed SWBA backoff calculation,\nhowever it did not remove a line of code that worked around the issues\nfrom the earlier version of the code.\nAfter the cleanup, the initial TSF based slot calculation now always\nreturns 0 instead of ATH_BCBUF-1, so the previous hack that reversed the\nslot order needs to be removed, as ad-hoc mode does not use staggered\nbeacons.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2be50b8df53f2f329b7ddcc8be286ef6a7469fd2", "tree": "7ae394235800749a21c89c5ea510a4b5d73f8f88", "parents": [ "2d3d0a88bd136f8e6f39bc53242712852e5d0bb2" ], "author": { "name": "Yogesh Ashok Powar", "email": "yogeshp@marvell.com", "time": "Fri Apr 01 18:36:47 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:12 2011 -0400" }, "message": "mwifiex: remove redundant encryption_mode mapping\n\nremove MWIFIEX_ENCRYPTION_MODE_ and use WLAN_CIPHER_SUITE_\nmacros directly\n\nSigned-off-by: Yogesh Ashok Powar \u003cyogeshp@marvell.com\u003e\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2d3d0a88bd136f8e6f39bc53242712852e5d0bb2", "tree": "1c7f5b477ccfc20fe8a1e12c8c997a87c2bd0df5", "parents": [ "f4263c9857e6411ef2388868cc6c79a1602a654e" ], "author": { "name": "Amitkumar Karwar", "email": "akarwar@marvell.com", "time": "Fri Apr 01 18:36:46 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:12 2011 -0400" }, "message": "mwifiex: return success in set_default_key for WPA/WPA2\n\nWhen testing wpa_supplicant with \u0027nl80211\u0027 driver to connect\nto an AP with WPA/WPA2 security, we notice the followings:\n\n1) add_key is called firstly with the key from cfg80211\n2) set_defaut_key is called next\n\nset_default_key() is specific to WEP keys and should not be\ncalled in case of WPA/WPA2 security. The set_default_key()\nwon\u0027t be called if wpa_supplicant uses \"-Dwext\" option,\nbut it\u0027s been called if \"-Dnl80211\" option is specified.\n\nWe can fix this issue by adding a check to return from\nset_default_key() if WEP key is not configured.\n\nSigned-off-by: Amitkumar Karwar \u003cakarwar@marvell.com\u003e\nSigned-off-by: Yogesh Ashok Powar \u003cyogeshp@marvell.com\u003e\nSigned-off-by: Marc Yang \u003cyangyang@marvell.com\u003e\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8447c163afeaa7e9f6f015088177b1c8511e0877", "tree": "722edb206661c80575508c86ca690def6f05a254", "parents": [ "dc1a4068fce2657991c5c3b1f6849f7fc466c69f" ], "author": { "name": "Stanislaw Gruszka", "email": "sgruszka@redhat.com", "time": "Thu Mar 31 17:36:28 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:11 2011 -0400" }, "message": "iwlwifi: remove sync_cmd_mutex\n\nWe now use priv-\u003emutex to serialize sync command, remove old\npriv-\u003esync_cmd_mutex and add assertion that priv-\u003emutex must be locked.\n\nSigned-off-by: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nAcked-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dc1a4068fce2657991c5c3b1f6849f7fc466c69f", "tree": "8463f06bbbc582f7afa6d8869350dc1f67f8732e", "parents": [ "3598e1774c94e55c71b585340e7dc4538f310e3f" ], "author": { "name": "Stanislaw Gruszka", "email": "sgruszka@redhat.com", "time": "Thu Mar 31 17:36:27 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:11 2011 -0400" }, "message": "iwlwifi: more priv-\u003emutex serialization\n\nCheck status bits with mutex taken, because when we wait for mutex\nunlock, status can change. Patch should also make remaining sync\ncommands be send with priv-\u003emutex taken. That will prevent execute\nthese commands when we are currently reset firmware, what could\npossibly cause troubles.\n\nSigned-off-by: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nAcked-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3598e1774c94e55c71b585340e7dc4538f310e3f", "tree": "09f7d500b76090f3cdb66bf2162d63d222696898", "parents": [ "08b8099c128d601fd675b212ef8b10397706b633" ], "author": { "name": "Stanislaw Gruszka", "email": "sgruszka@redhat.com", "time": "Thu Mar 31 17:36:26 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:11 2011 -0400" }, "message": "iwlwifi: fix enqueue hcmd race conditions\n\nWe mark command as huge by using meta-\u003eflags from other (non huge) command,\nbut flags can be possibly overridden, when non huge command is enqueued,\nwhat can lead to:\n\nWARNING: at lib/dma-debug.c:696 dma_debug_device_change+0x1a3/0x1f0()\nDMA-API: device driver has pending DMA allocations while released from device [count\u003d1]\n\nTo fix introduce additional CMD_MAPPED to mark command as mapped and\nserialize iwl_enqueue_hcmd() with iwl_tx_cmd_complete() using\nhcmd_lock. Serialization will also fix possible race conditions,\nbecause q-\u003eread_ptr, q-\u003ewrite_ptr are modified/used in parallel.\n\nOn the way fix whitespace.\n\nSigned-off-by: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nAcked-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "08b8099c128d601fd675b212ef8b10397706b633", "tree": "0014f6c8805270bbb1b4548bad427fc0db1256a5", "parents": [ "f3b3e36f4ecad9fd7b0ae04d7400f2153a7834eb" ], "author": { "name": "Xose Vazquez Perez", "email": "xose.vazquez@gmail.com", "time": "Sun Mar 27 01:15:53 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:10 2011 -0400" }, "message": "wireless: rt2x00: rt{2500,73}usb.c fix duplicate ids\n\nbased on the Ralink drivers:\n\nW \u003d Windows_ralink_driver\nL \u003d Linux_ralink_driver\n\nUSB_IDs W_73 W_2500 L_73 L_2500\n\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d \u003d\u003d\u003d\u003d \u003d\u003d\u003d\u003d\u003d\u003d \u003d\u003d\u003d\u003d \u003d\u003d\u003d\u003d\u003d\u003d\n0x050d,0x7050 - - - YES\n0x050d,0x705a - - YES -\n0x1371,0x9022 - YES YES -\n0x148f,0x2573 YES - YES -\n\nSigned-off-by: Xose Vazquez Perez \u003cxose.vazquez@gmail.com\u003e\nAcked-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f3b3e36f4ecad9fd7b0ae04d7400f2153a7834eb", "tree": "94417c101111e299fecd93ff41b2304e47e59e2c", "parents": [ "b0006e69615868f3dfdfe2bd64eb11973f1208fc", "db940cb0db7c69a217661ecd49e1e6b0d680a6cc" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:30:53 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:30:53 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6\n" }, { "commit": "b0006e69615868f3dfdfe2bd64eb11973f1208fc", "tree": "6c0301988bf8d8ab91c2f5461aa193b3e2f9f62f", "parents": [ "26d59535aa08386b97ece58a27bb16fca4f066db" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Fri Mar 25 20:21:55 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:24:37 2011 -0400" }, "message": "ar9170usb: purge obsolete driver\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ccc7c28af205888798b51b6cbc0b557ac1170a49", "tree": "327d8442a68447cf4cdf8425e2e6713c77e6328a", "parents": [ "ba91d1a1bcccd90247b5b9703c1a236cc2e95698" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Fri Apr 01 13:26:52 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:07 2011 -0400" }, "message": "ssb: pci: implement serdes workaround\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ba91d1a1bcccd90247b5b9703c1a236cc2e95698", "tree": "c675d1dc7cebe0396e9df0a27d690eea9e853173", "parents": [ "1b1c7acd9709e545399d1b6b89888f025911c0a2" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Fri Apr 01 12:07:34 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:07 2011 -0400" }, "message": "ssb: pci: implement mdio reading\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1b1c7acd9709e545399d1b6b89888f025911c0a2", "tree": "cdc4929cd84d7e80948fac371b59d2c46a70bd8d", "parents": [ "6c74608bd479bbe02ce330f83df43c3f535ed200" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Fri Apr 01 12:07:33 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:07 2011 -0400" }, "message": "ssb: pci: fix mdio writes on newer cores (rev 10+)\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6c74608bd479bbe02ce330f83df43c3f535ed200", "tree": "359ccf7d0b71acf0177ffafcadb4be622e134fb9", "parents": [ "ce57d9e694d98e421e329fbac5d6f5dc5e9e101e" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Fri Apr 01 12:07:32 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:06 2011 -0400" }, "message": "ssb: pci: trivial: drop useless pointer\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ce57d9e694d98e421e329fbac5d6f5dc5e9e101e", "tree": "f22695ac2aa83c5d90d583f222e219ddf1d0f912", "parents": [ "832fd35a545ecde11082d2dab74dd0aef8e0505e" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Fri Apr 01 12:06:48 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:06 2011 -0400" }, "message": "ssb: trivial: use u8 for chip_rev (it\u0027s mask is 0xF)\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "832fd35a545ecde11082d2dab74dd0aef8e0505e", "tree": "107b779a2f67dbecc121c32d1e6b215d2ba11aa0", "parents": [ "8120347de30f98982b8c75243e3b17dd1ee75740" ], "author": { "name": "Vasanthakumar Thiagarajan", "email": "vasanth@atheros.com", "time": "Fri Apr 01 15:32:16 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:06 2011 -0400" }, "message": "ath9k_hw: Use appropriate rx gain table for AR9485\n\nSigned-off-by: Vasanthakumar Thiagarajan \u003cvasanth@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8120347de30f98982b8c75243e3b17dd1ee75740", "tree": "240a6423156b94f586957e4eed6505b82079ca1c", "parents": [ "7327890a1f42046c50030c8723bdbd9266d781bc" ], "author": { "name": "Bing Zhao", "email": "bzhao@marvell.com", "time": "Thu Mar 31 19:50:14 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:06 2011 -0400" }, "message": "mwifiex: remove unused macros in decl.h and main.h\n\nThese macros are leftover of previous cleanup patches.\n\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7327890a1f42046c50030c8723bdbd9266d781bc", "tree": "857b83c241bf70d602d83792b55557581ff274de", "parents": [ "2b06bdbe073f8dff93eb476f07352df43dcdba44" ], "author": { "name": "Bing Zhao", "email": "bzhao@marvell.com", "time": "Wed Mar 30 18:12:45 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:05 2011 -0400" }, "message": "mwifiex: remove struct mwifiex_802_11_fixed_ies\n\nstruct mwifiex_802_11_fixed_ies is not necessary.\nstruct mwifiex_event_wep_icv_err is not used any more.\n\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2b06bdbe073f8dff93eb476f07352df43dcdba44", "tree": "f3aad8c0cc48faa49874028ea60ab0cefe9d7736", "parents": [ "4dd365fd55991b4e54a1d1c255081e6370b9da29" ], "author": { "name": "Marc Yang", "email": "yangyang@marvell.com", "time": "Wed Mar 30 18:12:44 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:05 2011 -0400" }, "message": "mwifiex: cleanup power save related struct and macros\n\nremove redundant structures and unused macros\n\nSigned-off-by: Marc Yang \u003cyangyang@marvell.com\u003e\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4f3f1ee9f373abfdc09bb3bed87969b7fe0fba06", "tree": "7a66e5cd1547f80f034a97aa049ef1e8b845e159", "parents": [ "fd2e401a35500c9af63dc7ffbc545d2e3c478702" ], "author": { "name": "Marc Yang", "email": "yangyang@marvell.com", "time": "Mon Mar 28 17:55:44 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:05 2011 -0400" }, "message": "mwifiex: remove unused macros in fw.h\n\nThese definitions are no longer used after previous cleanups.\n\nSigned-off-by: Marc Yang \u003cyangyang@marvell.com\u003e\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fd2e401a35500c9af63dc7ffbc545d2e3c478702", "tree": "80b7d421ae3d9bae360f5c0922b3c9bfcbe847e9", "parents": [ "f986b6d538c9351c99108b51be9f77ac1b300b16" ], "author": { "name": "Marc Yang", "email": "yangyang@marvell.com", "time": "Mon Mar 28 17:55:43 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:05 2011 -0400" }, "message": "mwifiex: remove unused radio_on variable and macros\n\nThe radio_on variable is defined but never used.\n\nSigned-off-by: Marc Yang \u003cyangyang@marvell.com\u003e\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f986b6d538c9351c99108b51be9f77ac1b300b16", "tree": "7a5a1afe3f07cd6aff200cacee138453c46c6df4", "parents": [ "eecd8250e492ffc4e7b72953cda9c2f3ba0e6ccc" ], "author": { "name": "Marc Yang", "email": "yangyang@marvell.com", "time": "Mon Mar 28 17:55:42 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:04 2011 -0400" }, "message": "mwifiex: remove MWIFIEX_AUTH_MODE_ macros\n\nreplace them with NL80211_AUTHTYPE_ macros\n\nSigned-off-by: Marc Yang \u003cyangyang@marvell.com\u003e\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "eecd8250e492ffc4e7b72953cda9c2f3ba0e6ccc", "tree": "1897ca77a7d7746bd6c2fd8f748e06bee971bdfb", "parents": [ "6a4c499e86f54ed9316a87e7ddc6b7d33adb4976" ], "author": { "name": "Bing Zhao", "email": "bzhao@marvell.com", "time": "Mon Mar 28 17:55:41 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:04 2011 -0400" }, "message": "mwifiex: remove MWIFIEX_BSS_MODE_ macros\n\nreplace them with NL80211_IFTYPE_ macros\n\nAlso remove redundant functions mwifiex_drv_get_mode()\nand mwifiex_bss_ioctl_mode().\n\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: Amitkumar Karwar \u003cakarwar@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6a4c499e86f54ed9316a87e7ddc6b7d33adb4976", "tree": "4230053982ce066115bb587c5c43f0b611989953", "parents": [ "f16d2db704b873d34cec54f992637f3579e10e08" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Mon Mar 28 13:35:51 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:04 2011 -0400" }, "message": "rt2x00: Add an error message when trying to send on a full queue\n\nWe already tell mac80211 to stop the queue when we hit a certain\nthreshold. Hence, it shouldn\u0027t happen at all that a frame gets queued\nfor tx on a full queue. Add an error message for this case.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nAcked-by: Gertjan van Wingerde \u003cgwingerde@gmail.com\u003e\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f16d2db704b873d34cec54f992637f3579e10e08", "tree": "23b22980164221d6a3cd26ca98b1e19074da1f86", "parents": [ "b35e77cf84137bbb4b6888dc90616eb0b452ea36" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Mon Mar 28 13:35:21 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:04 2011 -0400" }, "message": "rt2x00: Fix tx aggregation problems with some clients\n\nSome clients seem to rely upon the reception of BlockAckReqs to flush\ntheir rx reorder buffer. In order to fix aggregation for these clients\nrt2x00 should send a BlockAckReq if the transmission of an AMPDU\nsubframe fails.\n\nIntroduce a new flag TXDONE_AMPDU to indicate that this is an AMPDU\nsubframe and pass IEEE80211_TX_STAT_AMPDU_NO_BACK to mac80211 if an\nAMPDU subframe failed during transmission.\n\nThis fixes aggregation problems with Intel 5100 Windows STAs (and maybe\nothers as well).\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b35e77cf84137bbb4b6888dc90616eb0b452ea36", "tree": "5c0cef241b0dd528f3a30d29c0d1594cba5970ae", "parents": [ "351151e8ace033fe3b1977516b32a6c76e9a3f6d" ], "author": { "name": "Ivo van Doorn", "email": "IvDoorn@gmail.com", "time": "Mon Mar 28 13:34:50 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:03 2011 -0400" }, "message": "rt2x00: Add support for the ZyXEL NWD-211AN USB\n\nAdd new USB ID\n\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "351151e8ace033fe3b1977516b32a6c76e9a3f6d", "tree": "1ed47898915a94933affc830c8a6c4fba2fcee7f", "parents": [ "9e33a3553821418b2c4f53d09311476c55176b13" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Mon Mar 28 13:34:15 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:03 2011 -0400" }, "message": "rt2x00: Fix STBC transmissions to STAs with Rx STBC \u003e 1\n\nFor STBC transmissions rt2x00 used the number of RxSTBC streams the\ndestination STA indicates in its HT capabilities as STBC value in\nthe TXWI.\n\nHowever, the legacy drivers and our own comment in rt2800.h suggest\nthat the STBC field in the TXWI only allows a value of 0 or 1.\nThe values 2 and 3 are reserved (probably for future devices).\n\nAnd indeed, STBC transmissions to STAs indicating more then 1\nRxSTBC stream fail when the STBC field is set to something \u003e1.\n\nFix this by only setting the STBC field to 1 when STBC should be\nused.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nAcked-by: Gertjan van Wingerde \u003cgwingerde@gmail.com\u003e\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9e33a3553821418b2c4f53d09311476c55176b13", "tree": "fa0538ca1775be5b598949b2418721268e0ece53", "parents": [ "2f2bb7e8bdc977c94cdaaf84328526555eba89b1" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Mon Mar 28 13:33:40 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:03 2011 -0400" }, "message": "rt2x00: Implement tx power temperature compensation\n\nrt2800 devices should adjust their tx power in accordance with the\neeproms temperature calibration values. Add a new driver callback\ngain_calibration that is called every 4 seconds.\n\nThe rt2800 gain calibration routine simply runs the tx power\nconfiguration that takes care of calculating the temperature\ncompensation delta.\n\nWe don\u0027t need to synchronize the calls to rt2800_config_txpower\nas they should all happen from mac80211\u0027s single threaded workqueue.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2f2bb7e8bdc977c94cdaaf84328526555eba89b1", "tree": "2fecab069c76d9fc83df47453b781f440fe2659e", "parents": [ "fa71a160272c0eec9c04102ab2a82befb7cb107f" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Mon Mar 28 13:33:04 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:03 2011 -0400" }, "message": "rt2x00: Remove obsolete rt2x00queue_align_payload\n\nSince commit d1c3a37ceeb1a5ea02991a0476355f1a1d3b3e83 (\"mac80211:\nclarify alignment docs, fix up alignment\") removed the requirement\nfor a 4-byte aligned payload rt2x00queue_align_payload is obsolete\nas mac80211 will align the payload when it passes the frame to the\nnet stack.\n\nAs a result we can remove the call to rt2x00queue_align_payload in the\nrx path and since that\u0027s the last user we can remove\nrt2x00queue_align_payload altogether.\n\nOne advantage is that we save some alignment operations for frames\nthat don\u0027t need to be aligned (for example beause they are not passed\nto the net stack).\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fa71a160272c0eec9c04102ab2a82befb7cb107f", "tree": "28dfc34350a2cc5616cf28a2d345a63a4a332093", "parents": [ "2af242e19f06cfaade7ac8608c9df8af1e0fbb34" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Mon Mar 28 13:32:32 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:03 2011 -0400" }, "message": "rt2x00: Indention cleanup in rt2800lib\n\nFix the indention in rt2800_compesate_txpower and also fix a typo in\nthe function name rt2800_compesate_txpower -\u003e rt2800_compensate_txpower.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2af242e19f06cfaade7ac8608c9df8af1e0fbb34", "tree": "a7492fb3651ad39cc053e64f0af19469f1958f2d", "parents": [ "75faae8b80171b447bfc4bac448308676fb8a663" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Mon Mar 28 13:32:01 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:02 2011 -0400" }, "message": "rt2x00: Don\u0027t recalculate HT40 compensation for each rate\n\nPreviously the HT40 tx power compensation value was calculated for each\nrate. However, the calculation is independent of the tx rate and as such\ncan be precalculated and just passed in for each rate.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "75faae8b80171b447bfc4bac448308676fb8a663", "tree": "e0699a7e0c7056db1859aa3e523e9323ceeedd1c", "parents": [ "aca7305be5cd9e07f042e6bf6547e7c5635f0041" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Mon Mar 28 13:31:30 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:02 2011 -0400" }, "message": "rt2x00: Restructure bw_comp calculation\n\nMove the HT40 check inside the calculation function to make it easier\nfor a later cleanup.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "aca7305be5cd9e07f042e6bf6547e7c5635f0041", "tree": "feb5d6a5fcf65e2da3bb91609d740effbd255fc2", "parents": [ "f78987cf8bb740b7a3636c08e003f1976f860cfc" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Mon Mar 28 13:30:59 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:02 2011 -0400" }, "message": "rt2x00: Remove DRIVER_SUPPORT_WATCHDOG flag\n\nWe can simply check if the driver registered the watchdog callback.\nThere\u0027s no need to have an additional flag for that.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f78987cf8bb740b7a3636c08e003f1976f860cfc", "tree": "f447ca74205caebb7dc32a1bdcbfd128ec245601", "parents": [ "2e7798b7c12bdaab4a4aee76d6d1ab7c986234ac" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Mon Mar 28 13:30:36 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:02 2011 -0400" }, "message": "rt2x00: Calculate tx status fifo size instead of hardcoding it\n\nInstead of hardcoding the tx status fifo size as 512 calculate it based\non the number of tx queues and the number of entries per queue. Also\nround the size up to a power of 2 as kfifo would otherwise round it\ndown.\n\nOn rt2800pci this will increase the kfifo size from 512 bytes to 1024\nbytes which is then able to hold the tx status for all entries in all\ntx queues.\n\nFurthermore, if the number of tx queues or tx entries changes in the\nfuture (use of the MGMT queue for example) the kfifo size doesn\u0027t need\nto be updated.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nAcked-by: Gertjan van Wingerde \u003cgwingerde@gmail.com\u003e\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2e7798b7c12bdaab4a4aee76d6d1ab7c986234ac", "tree": "accdb12b6043726b480af2473b8982ba8cd79524", "parents": [ "166389375d5a3894aa00a9c2e490ac4b9af2a891" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Mon Mar 28 13:30:09 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:01 2011 -0400" }, "message": "rt2x00: Limit rt2800pci txdone processing to 16 entries at once\n\nInstead of reporting an unlimited number of tx status reports to\nmac80211 stop after 16 frames and reschedule the tx status tasklet.\nThis allows other tasklets to be run inbetween.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nAcked-by: Gertjan van Wingerde \u003cgwingerde@gmail.com\u003e\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "166389375d5a3894aa00a9c2e490ac4b9af2a891", "tree": "d1e2d7d4d639975c3cb263c71a88474719312409", "parents": [ "324732848c42bf79988479ee1b4359e15f08154b" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Mon Mar 28 13:29:44 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:01 2011 -0400" }, "message": "rt2x00: Limit rt2x00pci rxdone processing to 16 entries at once\n\nInstead of receiving an unlimited number of frames, stop after 16\nentries and reschedule the rxdone tasklet. This allows other tasklets\nto be run inbetween.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nAcked-by: Gertjan van Wingerde \u003cgwingerde@gmail.com\u003e\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "324732848c42bf79988479ee1b4359e15f08154b", "tree": "c2835df869da35b84274242f3862ed5e171211be", "parents": [ "6d2bd916afe6950b50f750cd82bbb9c6ff58611f" ], "author": { "name": "Larry Finger", "email": "Larry.Finger@lwfinger.net", "time": "Sun Mar 27 16:19:57 2011 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:01 2011 -0400" }, "message": "rtlwifi: Remove unused/unneeded variables\n\nRemove some unused variables and correct spelling errors.\n\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6d2bd916afe6950b50f750cd82bbb9c6ff58611f", "tree": "b8e53e3b6dfcd1dbed899cd3b6afd60110dec450", "parents": [ "b93f85f0fb019f527b68569aafb836c94b89a47e" ], "author": { "name": "Marc Yang", "email": "yangyang@marvell.com", "time": "Fri Mar 25 19:47:02 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:01 2011 -0400" }, "message": "mwifiex: use IEEE80211_HT_CAP_ macros for 11n cap_info\n\nThe hw_dot_11n_dev_cap reported by firmware hw_spec\nhas different format than the 11n capabilities.\nHence a lot of SET_ and RESET_ bit operation macros\nwere used to convert the dev_cap format to 11n\ncapability format. However the locally defined 11n\nht_cap macros are not necessary as we can use\nIEEE80211_HT_CAP_ macros directly.\n\nThe 32-bit dev_cap bitmap is added as comment to\nexplain the mapping between firmware and 11n spec.\n\nSome unused macros and unnecessary adapter variables\nare also removed.\n\nSigned-off-by: Marc Yang \u003cyangyang@marvell.com\u003e\nSigned-off-by: Yogesh Ashok Powar \u003cyogeshp@marvell.com\u003e\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b93f85f0fb019f527b68569aafb836c94b89a47e", "tree": "81704dca7b4450f3387c75ebfce9f2b063f704ba", "parents": [ "5f9f1812b68a2979bc97399cd4954f1c191986af" ], "author": { "name": "Bing Zhao", "email": "bzhao@marvell.com", "time": "Fri Mar 25 19:47:01 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:00 2011 -0400" }, "message": "mwifiex: remove macro SHORT_SLOT_TIME_DISABLED\n\nand SHORT_SLOT_TIME_ENABLED.\nUse WLAN_CAPABILITY_SHORT_SLOT_TIME instead.\n\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "203afecaa320fa8c541ce130aed449ff53f5b4aa", "tree": "d52aedcfe5ff7cb3faf913e6ff8321874f7d1d99", "parents": [ "0022801c893e953ebff8e0ad00cc22716055babf" ], "author": { "name": "Marc Yang", "email": "yangyang@marvell.com", "time": "Thu Mar 24 20:49:39 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:00 2011 -0400" }, "message": "mwifiex: remove unnecessary _set_auth functions\n\nmwifiex_set_encrypt_mode()\nmwifiex_set_auth_mode()\nmwifiex_set_auth()\nThese functions are confusing and misleading.\nAnd they are really not needed at all.\n\nSome unused definitions are also removed.\n\nSigned-off-by: Marc Yang \u003cyangyang@marvell.com\u003e\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0022801c893e953ebff8e0ad00cc22716055babf", "tree": "2303759359ec0a7c4e56a8e26c3d720e1edaa330", "parents": [ "1ed76487ce115110171480deabd3cd4656f9803e" ], "author": { "name": "Yogesh Ashok Powar", "email": "yogeshp@marvell.com", "time": "Thu Mar 24 20:49:38 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:00 2011 -0400" }, "message": "mwifiex: remove helper functions for displaying 11n capabilities\n\n\u0027iw list\u0027 is sufficient to retrieve the information which\nwas displayed by these functions.\n\nSigned-off-by: Yogesh Ashok Powar \u003cyogeshp@marvell.com\u003e\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2638126a7c7cce87d51ae5d3bfaca9350503c0b4", "tree": "13d11c572209fd76c562e0fd979ed81310e2df0a", "parents": [ "468b0d4482cadd174298e2fe9bde6a20044f90f5" ], "author": { "name": "Mohammed Shafi Shajakhan", "email": "mshajakhan@atheros.com", "time": "Thu Mar 24 19:06:40 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:19:59 2011 -0400" }, "message": "ath9k_hw: remove ath9k_get_channel_edges\n\nThis function is nowhere used.\n\nSigned-off-by: Mohammed Shafi Shajakhan \u003cmshajakhan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "468b0d4482cadd174298e2fe9bde6a20044f90f5", "tree": "93a79f7d587cc438fb8b00cf92f26943976394cb", "parents": [ "b64c6a3d1ab1bab9396e6efd2fd03479be4d0a63" ], "author": { "name": "Mohammed Shafi Shajakhan", "email": "mshajakhan@atheros.com", "time": "Thu Mar 24 15:49:54 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:18:33 2011 -0400" }, "message": "ath9k: remove set11n_virtualmorefrag\n\nThis does not seems to be used anywhere so remove it.\n\nSigned-off-by: Mohammed Shafi Shajakhan \u003cmshajakhan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b64c6a3d1ab1bab9396e6efd2fd03479be4d0a63", "tree": "c3eec5dd78375e73b505a63aac7f34e8bc083720", "parents": [ "279daf64c01e391379060a6d30e9827cc0c56612" ], "author": { "name": "Mohammed Shafi Shajakhan", "email": "mshajakhan@atheros.com", "time": "Thu Mar 24 14:36:16 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:18:33 2011 -0400" }, "message": "ath9k: cleanup few redundant macros\n\nSigned-off-by: Mohammed Shafi Shajakhan \u003cmshajakhan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "18d6a0f5b6693d630a8da9dfd6cac1ea4e5dccab", "tree": "fe8405c00398b6b74d76c7dec61196732a4e33b1", "parents": [ "83860c594f65945b1a2c99e84338e1145cd34890", "7eaa6a5e964f1ab02d849bda36950c0d30be8ce2" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:10:36 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:10:36 2011 -0400" }, "message": "Merge branch \u0027wireless-next-2.6\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6\n" }, { "commit": "8693ac900e230c85d6fff428984a0f983330844d", "tree": "43b58e7c39268bb13835801f7d8d81f22924d242", "parents": [ "105721328f0fa53e772592eaca17ee0023f0cc87" ], "author": { "name": "Vinicius Costa Gomes", "email": "vinicius.gomes@openbossa.org", "time": "Mon Mar 14 18:20:33 2011 -0300" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Thu Mar 31 14:25:25 2011 -0300" }, "message": "Bluetooth: Fix sending LE data over USB\n\nNow that we have support for LE connections, before discarding a\nframe we must check if there\u0027s a LE connection over that transport.\n\nSigned-off-by: Vinicius Costa Gomes \u003cvinicius.gomes@openbossa.org\u003e\nAcked-by: Ville Tervo \u003cville.tervo@nokia.com\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "88d377b6c3c28ee54cd4c76bfe6e60f2d9bf6ae1", "tree": "c0af0eb3a29c313fa0e9fee8b771571bc91fb255", "parents": [ "0ce790e7d736cedc563e1fb4e998babf5a4dbc3d" ], "author": { "name": "Marc-Antoine Perennou", "email": "Marc-Antoine@Perennou.com", "time": "Thu Mar 24 14:51:21 2011 -0300" }, "committer": { "name": "Gustavo F. Padovan", "email": "padovan@profusion.mobi", "time": "Thu Mar 31 14:25:25 2011 -0300" }, "message": "Bluetooth: add support for Apple MacBook Pro 8,2\n\nJust adding the vendor details makes it work fine.\n\nSigned-off-by: Marc-Antoine Perennou \u003cMarc-Antoine@Perennou.com\u003e\nSigned-off-by: Gustavo F. Padovan \u003cpadovan@profusion.mobi\u003e\n" }, { "commit": "83860c594f65945b1a2c99e84338e1145cd34890", "tree": "6dd405215e9a3fb63be0d2d368578cf11aece998", "parents": [ "340d0ea774d4ff0038a068e14340b59c5a1fce2c" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Mar 23 20:57:33 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:21 2011 -0400" }, "message": "ath9k_hw: remove pCap-\u003etx_triglevel_max\n\nIt has the same purpose (and value) as ah-\u003econfig.max_txtrig_level\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "340d0ea774d4ff0038a068e14340b59c5a1fce2c", "tree": "eebc81651f2528ece090445f2b65878e2eb02a63", "parents": [ "6de12a1bcef0145436e815d30a3d48b9fadb199d" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Mar 23 20:57:32 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:20 2011 -0400" }, "message": "ath9k_hw: remove ATH9K_HW_CAP_ENHANCEDPM\n\nIt is not used anywhere\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6de12a1bcef0145436e815d30a3d48b9fadb199d", "tree": "8a54c5906d4b74ce85e0e10f247a2b9765a31ae8", "parents": [ "c429bdcf8fe033f04830a960e07c13a01f631499" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Mar 23 20:57:31 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:20 2011 -0400" }, "message": "ath9k_hw: remove pCap-\u003ekeycache_size\n\nSimilar to the number of tx queue, the number of keycache entries depends\non the chip and shouldn\u0027t be messed with based on EEPROM data.\nRemove this field and stick to using AR_KEYTABLE_SIZE\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c429bdcf8fe033f04830a960e07c13a01f631499", "tree": "3502807e2dbb2ca77a612f6f5e65d1b88e23ba1c", "parents": [ "0db156e9648e69c34e8e88328358a26611fd71e3" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Mar 23 20:57:30 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:20 2011 -0400" }, "message": "ath9k_hw: remove pCap-\u003ereg_cap\n\nIt is not used anywhere and seems pointless\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0db156e9648e69c34e8e88328358a26611fd71e3", "tree": "97f194ae20d0a8a332e2490ab3627233d332ea53", "parents": [ "f4c607dc53ece4ac15afed163292425efa060775" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Mar 23 20:57:29 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:20 2011 -0400" }, "message": "ath9k_hw: remove ah-\u003econfig.ht_enable\n\nIt is only used in one place, and the device id check that it\u0027s based on\ncan be moved there as well.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f4c607dc53ece4ac15afed163292425efa060775", "tree": "b470ccace15677ea0e86c8b530eb2e9945240548", "parents": [ "a9b6b2569cf107fe541381e82faa0a3c47a9a7fd" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Mar 23 20:57:28 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:20 2011 -0400" }, "message": "ath9k_hw: remove pCap-\u003etotal_queues\n\nThe EEPROM contains a field that can restrict the number of hardware queues,\nhowever this is not only useless (all the known chips contain the same\nnumber of hardware queues), but also potentially dangerous in case of a\nmisprogrammed EEPROM (could trigger driver crashes), so let\u0027s just ignore\nit completely.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a9b6b2569cf107fe541381e82faa0a3c47a9a7fd", "tree": "ddd70da664996e96c554682e2348f60598a41c12", "parents": [ "ca7a4deb4a1a87dbdc6e7cab0d1022a535204226" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Mar 23 20:57:27 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:19 2011 -0400" }, "message": "ath9k_hw: turn a few big macros into functions\n\nRF_BANK_SETUP, REG_WRITE_RF_ARRAY and REG_WRITE_ARRAY are way too big,\nso they shouldn\u0027t be inlined at every single callsite, especially since they\ncan easily be turned into real functions.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ca7a4deb4a1a87dbdc6e7cab0d1022a535204226", "tree": "b647da486f56f56cf1b2d4eefac79c473472267b", "parents": [ "845e03c93dda2c00ffb5c68a1f7c8efc412d7c1a" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Mar 23 20:57:26 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:19 2011 -0400" }, "message": "ath9k_hw: replace REG_READ+REG_WRITE with REG_RMW\n\nIt\u0027s easier to read and it slightly decreases code size\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "845e03c93dda2c00ffb5c68a1f7c8efc412d7c1a", "tree": "9c48d7b82ef167d9346ef1a3689f636a471c14f2", "parents": [ "f9f84e96f6d642aa7b337c22cbb7d6f936039fda" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Mar 23 20:57:25 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:19 2011 -0400" }, "message": "ath9k_hw: add a new register op for read-mask-write\n\nReduces the number of calls to register ops. On MIPS this reduces the\nath9k_hw binary size from 321k down to 310k\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f9f84e96f6d642aa7b337c22cbb7d6f936039fda", "tree": "f9887db51eda5716a8d1a33abee9af7b9d7fb5f3", "parents": [ "ec15e68ba6a505631016f230899bafbb7b8cd0d6" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Mar 23 20:57:24 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:19 2011 -0400" }, "message": "ath9k_hw: embed the ath_ops callbacks in the ath_hw struct\n\nWith this change, loading the address to a register read/write function\ncosts only one pointer dereference instead of two. On MIPS this reduces\nath9k_hw binary size from 326k down to 321k.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cfdc9a8bb8d90c6aa212a5a881862599673c443d", "tree": "7332e1d3eac1262be1241055ddc7573e6af27e50", "parents": [ "c944daf46a8cfa50d6c1f54d4842180d0384c594" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Wed Mar 23 14:52:19 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:18 2011 -0400" }, "message": "ath9k: Support RSN IBSS\n\nAdd support for using RSN IBSS with ath9k. For now, this uses software\ncrypto for group addressed frames in RSN IBSS, but that may be\noptimized in the future by extending the key cache design to support\nper-STA RX GTK.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c944daf46a8cfa50d6c1f54d4842180d0384c594", "tree": "3b83ef5e776af22c88075e01841e22101f44aff2", "parents": [ "87c510fe2d4f193cd4eb518364a2dfa5059b1218" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Tue Mar 22 21:54:19 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:18 2011 -0400" }, "message": "ath9k: fix stuck beacon detection\n\nStuck beacon detection is supposed to trigger when 9 consecutive beacons\ncould not be sent by the hardware. When the driver runs only one active\nAP mode interface, it still configures the hardware beacon timer for\n4 (ATH_BCBUF) beacon slots slots, which causes stuck beacon detection\nto be reset if ath9k_hw_stoptxdma clears the stuck frames between\nSWBA intervals.\nFix this by not resetting the missed beacon count for empty slots and\nmultiplying the threshold not by the maximum number of beacon slots\nbut by the configured number of beacon interfaces.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "87c510fe2d4f193cd4eb518364a2dfa5059b1218", "tree": "80d7b4d11df90ddbb4554b0f09c8c9f5b5717ad5", "parents": [ "dd347f2fb2ddb20a80e9a8285252bf208ab91398" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Tue Mar 22 21:54:18 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:18 2011 -0400" }, "message": "ath9k: trigger nfcal only after multiple missed beacons in AP mode\n\nSingle missed (i.e. not transmitted) beacons in AP mode are not very rare\nand not necessarily an indicator of strong interference, so only trigger\nnoise floor recalibration when multiple consecutive beacons could not\nbe transmitted.\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dd347f2fb2ddb20a80e9a8285252bf208ab91398", "tree": "9e1a33ea4f50dd9b116e80da2fd6250d570eb001", "parents": [ "f39de992540cf68cc865498242f963f70f7e97b3" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Tue Mar 22 21:54:17 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:17 2011 -0400" }, "message": "ath9k: fix beacon timer handling issues\n\nAP mode beacon timers in ath9k are configured in milliseconds, which breaks\nwhen increasing ATH_BCBUF to 8 instead of 4 (due to rounding errors).\nSince the hardware timers are actually configured in microseconds, it\u0027s\nbetter to let the driver use that unit directly.\n\nTo be able to do that, the beacon interval parameter abuse for passing\ncertain flags needs to be removed. This is easy to do, because those flags\nare completely unnecessary anyway. ATH9K_BEACON_ENA is ignored,\nATH9K_BEACON_RESET_TSF can be replaced with calling ath9k_hw_reset_tsf\nfrom the driver directly.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f39de992540cf68cc865498242f963f70f7e97b3", "tree": "f9ce8bc9c8f71796ea5e1c56e8a46a1d53bdeb0c", "parents": [ "5e6e3a92b9a4c9416b17f468fa5c7fa2233b8b4e" ], "author": { "name": "Vasily Khoruzhick", "email": "anarsoul@gmail.com", "time": "Wed Mar 16 16:41:46 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:17 2011 -0400" }, "message": "libertas_spi: Add support for suspend/resume\n\nAdd support for suspend/resume in if_spi.\n\nSigned-off-by: Vasily Khoruzhick \u003canarsoul@gmail.com\u003e\nAcked-by: Dan Williams \u003cdcbw@redhat.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5e6e3a92b9a4c9416b17f468fa5c7fa2233b8b4e", "tree": "de22c4c414412501e62894de65040bf30db28c64", "parents": [ "903946e6e21ef4dd678acafb8881cabde9182caf" ], "author": { "name": "Bing Zhao", "email": "bzhao@marvell.com", "time": "Mon Mar 21 18:00:50 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:17 2011 -0400" }, "message": "wireless: mwifiex: initial commit for Marvell mwifiex driver\n\nThis driver adds WiFi support for Marvell 802.11n based chipsets\nwith SDIO interface. Currently only SD8787 is supported. More\nchipsets will be supported later.\n\ndrivers/net/wireless/mwifiex/\n\nSigned-off-by: Nishant Sarmukadam \u003cnishants@marvell.com\u003e\nSigned-off-by: Amitkumar Karwar \u003cakarwar@marvell.com\u003e\nSigned-off-by: Kiran Divekar \u003cdkiran@marvell.com\u003e\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: Yogesh Ashok Powar \u003cyogeshp@marvell.com\u003e\nSigned-off-by: Marc Yang \u003cyangyang@marvell.com\u003e\nSigned-off-by: Ramesh Radhakrishnan \u003crramesh@marvell.com\u003e\nSigned-off-by: Frank Huang \u003cfrankh@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "903946e6e21ef4dd678acafb8881cabde9182caf", "tree": "014e2cc176a39a2cda111233edc2da5cf979665a", "parents": [ "be7974aa105dc47bb25013016d1fcad17da17783" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Mon Mar 21 17:27:35 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:17 2011 -0400" }, "message": "ath9k_hw: remove AR9485 1.0 support\n\nOnly AR9485 1.1 was sold. This debloats the driver by ~14 KiB.\n\n text data bss dec hex filename\n 300413 624 1056 302093 49c0d drivers/net/wireless/ath/ath9k/ath9k_hw.ko\n\n text data bss dec hex filename\n 310285 624 1056 311965 4c29d drivers/net/wireless/ath/ath9k/ath9k_hw-old.ko\n\n$ du -b ath9k_hw*\n6210541\tath9k_hw.ko\n6225089\tath9k_hw-old.ko\n\nCc: Bill Wu \u003cbill.wu@atheros.com\u003e\nCc: Paul Shaw \u003cpaul.shaw@atheros.com\u003e\nCc: Forbes Tsai \u003cForbes.Tsai@Atheros.com\u003e\nCc: Jesmine Chen \u003cjesmine.chen@atheros.com\u003e\nCc: Marvian Chen \u003cHou-hua.Chen@Atheros.com\u003e\nCc: Vivek Natarajan \u003cvivek.natarajan@atheros.com\u003e\nCc: Bernadette Yetso \u003cbernadette.yetso@atheros.com\u003e\nCc: Sarvesh Shrivastava \u003csarvesh.shrivastava@atheros.com\u003e\nAcked-by: Yi-Chen Su \u003cyi-chen.su@atheros.com\u003e\nAcked-by: Jeffrey Chung \u003cjeffrey.chung@atheros.com\u003e\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a9cbe96d19861755680a712b709cccac5dc6aca8", "tree": "fdf8eba161f8b2d2d2ee9418c32c89346a562f8c", "parents": [ "598cdd5246ea158310942699e5008ac7f687ad62" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sat Mar 19 13:55:43 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:16 2011 -0400" }, "message": "ath9k: remove the pending frames ath_txq_schedule workaround\n\nThis workaround called ath_txq_schedule whenever there were still pending\nframes for a queue, but the queue depth was zero. Because of its its high\nfalse positive probability (e.g. with paused TIDs) and because it is in\nthe way of other pending work (AP powersave fixes), it is better to remove\nthis code entirely.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "598cdd5246ea158310942699e5008ac7f687ad62", "tree": "a1ddf05181b6e98b06870e00f6adb737297275ee", "parents": [ "f171760c558946c7a2e0ee310dfb968f9d4853c6" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sat Mar 19 13:55:42 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:16 2011 -0400" }, "message": "ath9k_hw: force rx chainmask to 7 on AR9100\n\nMost AR9100 devices already have a chainmask of 7 (three antennas), however\non the ones that don\u0027t (rx and tx chainmask set to 5), problems with IQ\nmismatch calibration have been observed.\nThis shows up as tx queue hangs (and subsequent hardware resets) if traffic\nis sent during this type of calibration.\nForcing the rx chainmask to 7 fixes the calibration issues with no apparent\nnegative side effects on throughput and stability.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f171760c558946c7a2e0ee310dfb968f9d4853c6", "tree": "bd9fde75cb9df12eab81ae3a6d098930e7bc5d21", "parents": [ "6de66dd963ddd669667a81a2401f2fd6472ff55c" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sat Mar 19 13:55:41 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:16 2011 -0400" }, "message": "ath9k_hw: enable a BlockAck related fixup specific to AR9100\n\nFixes interop issues with aggregation in combination with multi-BSSID\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6de66dd963ddd669667a81a2401f2fd6472ff55c", "tree": "4ab0cca2a88c388f93c3bfe6af6f022a894af0c5", "parents": [ "6fb1b1e18fe3d141c54182c5d5b3af823bed455f" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sat Mar 19 13:55:40 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:15 2011 -0400" }, "message": "ath9k: add support for overriding LED pin and GPIO settings from platform data\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6fb1b1e18fe3d141c54182c5d5b3af823bed455f", "tree": "78d4b143bd0ef2368b3e4456f69a78bbe427b259", "parents": [ "691680b8335fa8995b190676f53e3bcef6477b4a" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sat Mar 19 13:55:39 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:15 2011 -0400" }, "message": "ath9k: add support for overriding the MAC address through platform data\n\nOn some devices the correct MAC address is not in the EEPROM data, but\nstored somewhere else.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "691680b8335fa8995b190676f53e3bcef6477b4a", "tree": "da065593ff7d2fa4dd15b2a9718357cc6872f8e0", "parents": [ "c70cab1a45d56395db03957f6504c6b613bece5b" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sat Mar 19 13:55:38 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:15 2011 -0400" }, "message": "ath9k: add an interface for overriding the value of specific GPIO pins\n\nSome devices control antenna settings or other things through GPIO pins\nof the wireless interface. Add a debugfs interface for changing those\nand keeping them set across card resets.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c70cab1a45d56395db03957f6504c6b613bece5b", "tree": "2fb350262d019fc98db7d5cf7fc068a4ac88411d", "parents": [ "716b1bf3c5040f2303d6d1d0dfee6d8851cedc9d" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sat Mar 19 13:55:37 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:15 2011 -0400" }, "message": "ath9k: remove unnecessary debugfs return code checks\n\nSince the ath9k debugfs directory is cleaned up by debugfs_remove_recursive,\nthere\u0027s no point in checking the return code of every single debugfs create\nline.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "716b1bf3c5040f2303d6d1d0dfee6d8851cedc9d", "tree": "e967f515d6b1504d5c71a4e7058a24271c92f944", "parents": [ "a0e7c6cfe2a04af450274638845802b5c384e8df" ], "author": { "name": "Larry Finger", "email": "Larry.Finger@lwfinger.net", "time": "Thu Mar 17 21:53:01 2011 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:14 2011 -0400" }, "message": "rtlwifi: rtl8192c{e,u}: Remove some extraneous casts on memcpy commands\n\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a0e7c6cfe2a04af450274638845802b5c384e8df", "tree": "58a5fba2a2f9f3f114fd20898b0818b7005a625a", "parents": [ "170335432ad36584a6d24fc1fd903024d221ef55" ], "author": { "name": "Nishant Sarmukadam", "email": "nishants@marvell.com", "time": "Thu Mar 17 11:58:49 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:14 2011 -0400" }, "message": "mwl8k: Queue ADDBA requests in respective data queues\n\nQueue ADDBA requests in respective data queues to avoid ADDBA\nrequests and the the related data packets (to the same ra/tid)\nqueued in the hardware to be sent out asynchronously.\n\nSigned-off-by: Nishant Sarmukadam \u003cnishants@marvell.com\u003e\nSigned-off-by: Brian Cavagnolo \u003cbrian@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "170335432ad36584a6d24fc1fd903024d221ef55", "tree": "b940ac56cb95b6aeff039ccc5f04b9198af522cc", "parents": [ "3aefc37ee789188f0d4488cae04ff618f4c4ddf6" ], "author": { "name": "Nishant Sarmukadam", "email": "nishants@marvell.com", "time": "Thu Mar 17 11:58:48 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:14 2011 -0400" }, "message": "mwl8k: Check outgoing rate for a station to decide if ampdu can be created\n\nIf the outgoing packet rate to a particular HT station is \u003c\u003d6.5\nMbps, do not attempt to create an ampdu. Also, if the outgoing\nrate is legacy rate, do not create an ampdu.\n\nSigned-off-by: Nishant Sarmukadam \u003cnishants@marvell.com\u003e\nSigned-off-by: Brian Cavagnolo \u003cbrian@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3aefc37ee789188f0d4488cae04ff618f4c4ddf6", "tree": "ec41b4de5ecdea63f4056996e7c94b76ff88dfae", "parents": [ "65f3ddcd08fe24490359274a8c9bf526e81357a5" ], "author": { "name": "Nishant Sarmukadam", "email": "nishants@marvell.com", "time": "Thu Mar 17 11:58:47 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:14 2011 -0400" }, "message": "mwl8k: Handle the watchdog event from the firmware\n\nWhen an ampdu stream is on, if the firmware rate adaptation\nlogic decides that the outgoing packet rate to the station needs\nto go below 6.5Mbps (non HT rate), it sends an event indicating that\nthe ampdu stream needs to be destroyed. Handle this event in the driver\nand destroy the ampdu stream so that the rate can go below 6.5Mbps\n\nSigned-off-by: Nishant Sarmukadam \u003cnishants@marvell.com\u003e\nSigned-off-by: Brian Cavagnolo \u003cbrian@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "65f3ddcd08fe24490359274a8c9bf526e81357a5", "tree": "ce6242a2c0a2eb179fb4b78f22b84e378e11f72b", "parents": [ "ac109fd0427008e5b55e0e52e59c364de6d686fe" ], "author": { "name": "Nishant Sarmukadam", "email": "nishants@marvell.com", "time": "Thu Mar 17 11:58:46 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:13 2011 -0400" }, "message": "mwl8k: Initiate BA sessions\n\nSpecifically, handle ampdu_action and attempt to start a BA\nsession on receiving the first qos packet from mac80211 for\ntransmission to a HT sta. While the BA session is being created,\nall the packets belonging to that stream will be dropped to\nprevent sequence number mismatch at the recipient.\n\nContains contributions from:\nYogesh Powar \u003cyogeshp@marvell.com\u003e\nPradeep Nemavat \u003cpnemavat@marvell.com\u003e\nBrian Cavagnolo \u003cbrian@cozybit.com\u003e\n\nSigned-off-by: Brian Cavagnolo \u003cbrian@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ac109fd0427008e5b55e0e52e59c364de6d686fe", "tree": "17a2013e1818da02b6cc15aec3b100f1f3fb23cb", "parents": [ "e600707b021efdc109e7becd467798da339ec26d" ], "author": { "name": "Brian Cavagnolo", "email": "brian@cozybit.com", "time": "Thu Mar 17 11:58:45 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:13 2011 -0400" }, "message": "mwl8k: add internal API for managing AMPDU streams\n\nIn particular, we can now add, start, lookup, and remove streams.\n\nBased on work by Nishant Sarmukadam \u003cnishants@marvell.com\u003e and\nPradeep Nemavat \u003cpnemavat@marvell.com\u003e.\n\nSigned-off-by: Pradeep Nemavat \u003cpnemavat@marvell.com\u003e\nSigned-off-by: Nishant Sarmukadam \u003cnishants@marvell.com\u003e\nSigned-off-by: Brian Cavagnolo \u003cbrian@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e600707b021efdc109e7becd467798da339ec26d", "tree": "29a8d2287c1ef4bc33865ee9995029ebdfb43faa", "parents": [ "5faa1aff08ef8d82b98ac2dfd7beb62ae6eda5e5" ], "author": { "name": "Brian Cavagnolo", "email": "brian@cozybit.com", "time": "Thu Mar 17 11:58:44 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:13 2011 -0400" }, "message": "mwl8k: differentiate between WMM queues and AMPDU queues\n\nWe now have two different kinds of queues. And the number of\nAMPDU queues may vary. So we must be clear about which queues we\nare dealing with. Note that when we report the number of queues\nto mac80211, we only report the WMM queues.\n\nBased on work by Yogesh Powar \u003cyogeshp@marvell.com\u003e.\n\nSigned-off-by: Brian Cavagnolo \u003cbrian@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5faa1aff08ef8d82b98ac2dfd7beb62ae6eda5e5", "tree": "3b984311fb21200ca6ee7fa3ac0602de779a8500", "parents": [ "8a7a578c2e3ac463a17fe30b11ada0509658a952" ], "author": { "name": "Nishant Sarmukadam", "email": "nishants@marvell.com", "time": "Thu Mar 17 11:58:43 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:13 2011 -0400" }, "message": "mwl8k: add support for block ack commands\n\nSigned-off-by: Pradeep Nemavat \u003cpnemavat@marvell.com\u003e\nSigned-off-by: Brian Cavagnolo \u003cbrian@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8a7a578c2e3ac463a17fe30b11ada0509658a952", "tree": "119aaafe120f9ee4d97538d923126910b94c66d9", "parents": [ "73b46320209e9fe0d65aba1b8c21489278047574" ], "author": { "name": "Brian Cavagnolo", "email": "brian@cozybit.com", "time": "Thu Mar 17 11:58:42 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:13 2011 -0400" }, "message": "mwl8k: update to ap firmware API version 2\n\nFirmware APIv2 adds the following enhancements:\n\n-- capabilities are reported by the firmware\n-- API supports up to 8 dedicated AMPDU streams\n-- optional packet timestamping and expiration can be enabled.\n Specifically, packets that are queued in firmware for longer\n than 500ms will be dropped if this option is used.\n\nBased on work by \"Nishant Sarmukadam\" \u003cnishants@marvell.com\u003e\n\nSigned-off-by: Brian Cavagnolo \u003cbrian@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "73b46320209e9fe0d65aba1b8c21489278047574", "tree": "66c6b49a01259ae2b1b3ad1946a8f2000b4979a6", "parents": [ "c835b21405fa551cd5af2c7bfe1c3ae129c5f8ef" ], "author": { "name": "Brian Cavagnolo", "email": "brian@cozybit.com", "time": "Thu Mar 17 11:58:41 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:12 2011 -0400" }, "message": "mwl8k: refactor in preparation for APIv2 update\n\nSpecifically, APIv2 will specify a variable number of AMPDU\nqueues in the MWL8K_CMD_GET_HW_SPEC. So init the tx queues after\nMWL8K_CMD_GET_HW_SPEC for ap fw.\n\nAlso, we make it safe to deinit queues that have not been init\u0027d.\nThis happens if the mwl8k_get_hw_spec_ap routine fails, for\nexample.\n\nSigned-off-by: Nishant Sarmukadam \u003cnishants@marvell.com\u003e\nSigned-off-by: Brian Cavagnolo \u003cbrian@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e7fc63388def06d2d1bdb6916748c92c037a42c6", "tree": "120e3880e7fb2fb18398aaf1be4f7740f6a5d561", "parents": [ "b0a9ede228175c25f76314a028d305fd5b2de427" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanoharan@atheros.com", "time": "Tue Mar 15 23:11:35 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:12 2011 -0400" }, "message": "ath9k_hw: Speedup register ops for HTC driver\n\nFine-tuning register write operation and avoid unnecessay\ndelays for ath9k_htc driver, saves hw reset time which\nimproves scanning time and also solves one of the following\nscenario.\n\nSometimes the ACK is sent by STA for assoc response is not\nseen at AP side. So the AP continues to send retry assoc\nresponses. At the STA side, since the assoc response was\nalready forwarded to mac80211, it proceeded to channel change\nwhich in turns does chip reset.\n\nIn most of the cases the chip reset was completed before\nmax retries are reached at AP side. Hence STA can able to ACK\nthe retried frames again. But in clear environment these retries\nare completed within shortspan of time.\n\nSince ath9k_htc consumes more time for hw reset, this latency\nis causing dissociation by AP due to max reties are reached.\nThis issue was originally reported with Cisco Aironet 1250 AP\nin HT40 mode in noise free environment.\n\nSigned-off-by: Rajkumar Manoharan \u003crmanoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b0a9ede228175c25f76314a028d305fd5b2de427", "tree": "ee160305418e13122f59043886bdcca00b9f13b5", "parents": [ "81544026e4cecb85a8b727d5f64cb3c8a8cb64a3" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanoharan@atheros.com", "time": "Tue Mar 15 19:55:38 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:11 2011 -0400" }, "message": "ath: Speedup key set/reset ops for HTC driver\n\nBy enabling buffered register write for ath9k_htc driver\navoids unnecessary dissociation while rekeying phase under\nheavy traffic exchange.\n\nSigned-off-by: Rajkumar Manoharan \u003crmanoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "81544026e4cecb85a8b727d5f64cb3c8a8cb64a3", "tree": "baa5a104298e02fd12ca294b32d5080cde572feb", "parents": [ "6d64ab7f9240e3201fde3fd16ce4227bd795d2ab" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanoharan@atheros.com", "time": "Tue Mar 15 19:55:36 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:11 2011 -0400" }, "message": "ath9k_hw: Fix throughput drops in HT40 mode for AR9287 chips\n\nDoing adc gain calibration for AR9287 chips is causing\nthroughput drops in HT40 mode. Remove ADC Gain from supported\ncalibration list.\n\nSigned-off-by: Rajkumar Manoharan \u003crmanoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6d64ab7f9240e3201fde3fd16ce4227bd795d2ab", "tree": "a51ef421c92a796ca43e747011be745982f279ad", "parents": [ "22dd2fd283ea96b4d45185d3e861ef46005082f4" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanoharan@atheros.com", "time": "Tue Mar 15 19:55:35 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:11 2011 -0400" }, "message": "ath9k_htc: Fix LED pin for AR9287 HTC device\n\nSigned-off-by: Rajkumar Manoharan \u003crmanoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "22dd2fd283ea96b4d45185d3e861ef46005082f4", "tree": "bde9b2314908db028bdd2144398044acc91b769b", "parents": [ "0ce790e7d736cedc563e1fb4e998babf5a4dbc3d" ], "author": { "name": "Dan Carpenter", "email": "error27@gmail.com", "time": "Tue Mar 15 10:03:24 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:11 2011 -0400" }, "message": "iwlwifi: remove duplicate initialization in __iwl_down()\n\nWe initialize exit_pending twice. It\u0027s the second initialization which\nis correct. That was added in d745d472af \"iwlwifi: cancel scan when\ndown the device\".\n\nSigned-off-by: Dan Carpenter \u003cerror27@gmail.com\u003e\nAcked-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6b2a4f7a5b777ea8fcf3bb38a0a33e68a920a9dc", "tree": "fcf7d9bddc31974ad046aecd51cc856c68e14cdd", "parents": [ "eefbab599531240adaffa1d23900afbc8b0342bd", "022b483596fabb5d1320aa4b76f43a754063f37e" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 12:09:30 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 12:09:30 2011 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits)\n mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE\n mmc: tmio_mmc: Move some defines into a shared header\n mmc: tmio: support aggressive clock gating\n mmc: tmio: fix power-mode interpretation\n mmc: tmio: remove work-around for unmasked SDIO interrupts\n sh: fix SDHI IO address-range\n ARM: mach-shmobile: fix SDHI IO address-range\n mmc: tmio: only access registers above 0xff, if available\n mfd: remove now redundant sh_mobile_sdhi.h header\n sh: convert boards to use linux/mmc/sh_mobile_sdhi.h\n ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h\n mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver\n sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD\n mmc: tmio: split core functionality, DMA and MFD glue\n mmc: tmio: use PIO for short transfers\n mmc: tmio-mmc: Improve DMA stability on sh-mobile\n mmc: fix mmc_app_send_scr() for dma transfer\n mmc: sdhci-esdhc: enable esdhc on imx53\n mmc: sdhci-esdhc: use writel/readl as general APIs\n mmc: sdhci: add the abort CMDTYPE bits definition\n ...\n" }, { "commit": "90f1e7481eebfd47e7dbf7c8c0cbfe31e025e031", "tree": "5c968e99d6f3f9ef756b9d399b5f9e8669ed4f5a", "parents": [ "d6ae0c63f09cc443aa14f8b966aa3e7b2229360b", "e240ae4aad9c5c0da189cb6c956cca58abd428d0" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 11:36:52 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 11:36:52 2011 -0700" }, "message": "Merge branch \u0027stable/bug-fixes-rc1\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen\n\n* \u0027stable/bug-fixes-rc1\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:\n xen: Use new irq_move functions\n xen: Convert genirq namespace\n xen: fix p2m section mismatches\n xen/p2m: Allocate p2m tracking pages on override\n xen-gntdev: unlock on error path in gntdev_mmap()\n xen-gntdev: return -EFAULT on copy_to_user failure\n" }, { "commit": "d6ae0c63f09cc443aa14f8b966aa3e7b2229360b", "tree": "13e3da32cc3c9ab5c32dde93164c7ce363e76a74", "parents": [ "8c82840e5414259b1963da36f82b64a755fafc75", "7fff4beb311dfab4f18ff2cd64f78ec89296a39a" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 11:20:09 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 11:20:09 2011 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:\n watchdog: softdog.c: enhancement to optionally invoke panic instead of reboot on timer expiry\n watchdog: fix nv_tco section mismatch\n watchdog: sp5100_tco.c: Check if firmware has set correct value in tcobase.\n watchdog: Convert release_resource to release_region/release_mem_region\n watchdog: s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region\n" }, { "commit": "8c82840e5414259b1963da36f82b64a755fafc75", "tree": "0087ca8ae4991d99fdcf93a70ca99db76812948d", "parents": [ "c86defc82c18b648193b5c6aabcc6204fd6bb373", "a9f0fbe2bbf328f869fc5ee5a12c6a4118c32689" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 11:11:18 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 11:11:18 2011 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:\n amd64_edac: Fix potential memleak\n" }, { "commit": "c86defc82c18b648193b5c6aabcc6204fd6bb373", "tree": "1ef70cfa56f5f9a123d0db6fefe4c434c12bd6c6", "parents": [ "1309d7afbed112f0e8e90be9af975550caa0076b", "9ad198cba2a8177eea6a7f2f0202b910abdef96b" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 10:46:15 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 10:46:15 2011 -0700" }, "message": "Merge branch \u0027irq-final-for-linus-v2\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027irq-final-for-linus-v2\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (111 commits)\n gpio: ab8500: Mark broken\n genirq: Remove move_*irq leftovers\n genirq: Remove compat code\n drivers: Final irq namespace conversion\n mn10300: Use generic show_interrupts()\n mn10300: Cleanup irq_desc access\n mn10300: Convert genirq namespace\n frv: Use generic show_interrupts()\n frv: Convert genirq namespace\n frv: Select GENERIC_HARDIRQS_NO_DEPRECATED\n frv: Convert cpu irq_chip to new functions\n frv: Convert mb93493 irq_chip to new functions\n frv: Convert mb93093 irq_chip to new function\n frv: Convert mb93091 irq_chip to new functions\n frv: Fix typo from __do_IRQ overhaul\n frv: Remove stale irq_chip.end\n m68k: Convert irq function namespace\n xen: Use new irq_move functions\n xen: Cleanup genirq namespace\n unicore32: Use generic show_interrupts()\n ...\n" }, { "commit": "1309d7afbed112f0e8e90be9af975550caa0076b", "tree": "750110269ee7a6d977494c5fb696af109ecb0aad", "parents": [ "0444d76ae64fffc7851797fc1b6ebdbb44ac504a" ], "author": { "name": "Peter Huewe", "email": "huewe.external.infineon@googlemail.com", "time": "Tue Mar 29 13:31:25 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 09:45:34 2011 -0700" }, "message": "char/tpm: Fix unitialized usage of data buffer\n\nThis patch fixes information leakage to the userspace by initializing\nthe data buffer to zero.\n\nReported-by: Peter Huewe \u003chuewe.external@infineon.com\u003e\nSigned-off-by: Peter Huewe \u003chuewe.external@infineon.com\u003e\nSigned-off-by: Marcel Selhorst \u003cm.selhorst@sirrix.com\u003e\n[ Also removed the silly \"* sizeof(u8)\". If that isn\u0027t 1, we have way\n deeper problems than a simple multiplication can fix. - Linus ]\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" } ], "next": "a9f0fbe2bbf328f869fc5ee5a12c6a4118c32689" }